WALL MOUNT CABINETS
adjustable rackrail provides ample
room for D-Ring cable managers
WRP/WRS Series Low-Profile Wall Cabinets
locking
hinged
body
A&E SPEC.
# 96-700
TIA/EIA COMPLIANT
Specify a WRP or WRS when wall mounting deep routers and hubs
accepts two
4 1/2” fans
(not included)
WRP-6
vented
for
cooling
Structural F eatures
Unique design with 23” useable racking depth allows mounting of deeper equipment
vertically in a parallel-to-the-wall orientation for space efficiency and aesthetics
Standard adjustable 11-gauge, 10-32 threaded rackrail
Solid hinged body swings either left or right
Angled, hinged plexiglass (WRP Series) or solid steel (WRS Series) top cover allows
convenient equipment access
Top cover keyed separately from body keylock, providing user access to equipment
controls while limiting access to rear equipment connections
Finished in a durable putty powder coat (WRP Series) or black textured powder coat
(WRS Series)
Thermal Management
Vented front and two bottom located fan mounting positions facilitate thermal
management
Cable Management
Rackrail adjusts to provide a space from 1” to 4” between top cover and equipment
faces, allowing abundant room for D-Ring cable managers
Code Compliancy
Grounding/bonding stud facilitates the proper grounding and bonding of electronic
equipment, as per NEBS and NEC standards
UL Listed in the US and Canada
unique vertical
racking provides
a generous 23”
useable depth
25 1/4”
WRP-6
Putty
Part #
Black
Part #
Racking
Height
Useable
Depth
Weight
Capacity
WRP-4
WRS-4
7”
(4 space)
23”
150 lbs.
WRP-6
WRS-6
10 1/2 ” (6 space)
WRP-8
23”
150 lbs.
WRS-8
14”
23”
150 lbs.
(8 space)
28 /2”
5.50” thru 8.50”
in 1.00” increments
23.00” thru 20.00”
in 1.00” increments
1
laser knockout
and electrical
knockouts
in backpan
A&E SPEC.
# 96-068
WRS-6
shown with top
cover open
5.00”
3.63”/7.13”/10.63”
SBX Series Wall Mount Cabinet
electrical knockouts
in top and bottom
Specify an SBX when seeking an economical solution for wall mounting smaller
systems
Structural F eatures
Removable backpan simplifies installation and provides easy access to
equipment connections
Fully welded center section utilizes 18-gauge steel, backpan constructed from
14-gauge steel
Locking front door swings open a full 180 º on a virtually indestructible hinge for
rugged security and unobtrusive accessibility
Deep rail-to-door clearance ratio provides flexibility not found in flush-mount
door designs
Standard 11-gauge, 10-32 threaded rackrail with marked rackspace increments
to speed equipment mounting
Thermal Management
Ventilation slots at top & bottom of each side promote Passive thermal management
removable backpan
for easier wall
mounting!
Cable Management
2 ” and w” electrical knockouts at top, bottom and rear facilitate cable entry
Racking
Height
Useable
Depth
SBX-7
12 1/4 ” (7 space)
14 3/4 ”
75 lbs.
SBX-10
17 /2 ” (10 space)
14 3/4 ”
100 lbs.
Part #
1 7” SBX-10
rack is easily
fastened to
backpan with
included security
screws and
driver bit
includes
door!
1
Weight
Capacity
Distributed by Multicom, Inc.
www.multicominc.com
1076 Florida Central Parkway, Longwood, FL 32750
Toll free: 800.423.2594 Phone: 407.331.7779 Fax: 407.339.0204
multicom@multicominc.com
RACKS AND ENCLOSURES WALL MOUNT
locking hinged
plexiglass
top cover