A30S4E Free-Stand Single and Dual Access enclosure
The latest Hoffman-branded enclosure from
Pentair has been specially designed for heavy
duty applications – housing systems with large
components or complex mounting configurations
– in harsh environments. Three-point latching and
sealing provide industry-leading protection from
dust, dirt, oil and water.
The enclosure is for housing motor starters, drives,
contactors and PLCs, as well as a wide variety of
other electrical and electronic equipment. It is used
extensively in oil and gas, pulp and paper, chemical,
food and beverage, pharmaceutical, textile and
similar industries. The new design with double
access is ideally suited for the mounting of physically
large, heavy duty devices where tight sealing (IP) and
rigidity (IK) is important.
INDUSTRY STANDARDS
SPECIFICATIONS
IEC EN 60529, IP66
• Thickness 2.5mm, stainless steel type AISI 304
(EN 1.4301) or 316L (1.4404)
IEC EN 50102, IK10
IEC EN 62208;
UL 508A Listed;
Type 4, 4X, 12 File No. E61997
NEMA Type 4, 4X, 12
• External surface body and door brushed finish grain 240, Ra≤0,8µm,
smooth internal surface (2B)
• Heavy-duty three-point latching mechanism operated by Type 316L
stainless steel POWERGLIDE® padlocking handle
• Seams continuously welded and ground smooth
• Body grounding, studs door and body
• Two-door enclosures are provided with a removable centerpost for
easy mounting plate installation
• Bottom gland plates, 3.0mm removable from inside, with
grounding stud
• Seamless foam-in-place polyurethane gasket assures a water-tight
and dust-tight seal
• High-impact thermoplastic data pocket provided with each enclosure
• Base plinth 100mm included, with front and rear removable cover
for easy cable entry
• Door opening angle 100˚
EQUIPMENT PROTECTION
FREE-STAND SINGLE AND DUAL ACCESS ENCLOSURE
Design with CONFIDENCE
A30S4E Free-Stand Single and Dual Access enclosure
STANDARD PRODUCT; SINGLE ACCESS
Size HxWxD [mm]
2000x600x600
2000x800x600
2000x1000x600
2000x1200x600
2000x600x800
2000x800x800
2000x1200x800
2000x1560x800
1800x600x400
1800x800x400
1800x1000x400
1800x1200x400
1800x600x600
1800x800x600
1800x1000x600
1800x1200x600
F [mm]
999,6
999,6
999,6
999,6
999,6
999,6
999,6
999,6
896,6
896,6
896,6
896,6
896,6
896,6
896,6
896,6
G [mm]
875,1
875,1
875,1
875,1
875,1
875,1
875,1
875,1
775,1
775,1
775,1
775,1
775,1
775,1
775,1
775,1
*D – double doors with centerpost
85,7
LIGHT
CHANNEL
A-A
CENTER SUPPORT
(only for double door)
29,2
MOUNTING
CHANNEL
A
A
29,2
A-A
HALF PANEL
W - 55,8
G
181, 0
41,3
44,5
DOOR
GROUNDING
STUD
BODY
GROUNDING
STUD
DOOR
GROUNDING
STUD
DOOR
BODY
GROUNDING
STUD
GROUNDING
STUD
BODY
DOOR
GROUNDING
STUD GROUNDING
STUD
GLAND PLATE
GROUNDING
BODY
STUD
GROUNDING
STUD
REMOVABLE
CENTERPOST
EQUIPMENT PROTECTION
25,4
FREE-STAND SINGLE AND DUAL ACCESS ENCLOSURE
A
A
51,7
25,4
41,3
MOUNTING
CHANNEL
22,2
100,2
22,2
104,3
100,0
100,0
85,7
63,9
85,7
63,9
100,0
85,7
63,9
87,5
A
B
41,3
67,5
67,5
F
W - 88,9
W - 55,8
51,7
1 8 1 ,0
181, 0
H - 171,5
H - 128,6
H
H - 171,5
44,5
W/2 - 88,2
44,5
25,4
25,4
F
44,5
67,5
W - 55,8
G
W - 88,9
72,8
25,4
F
44,5
H
H - 171,5
H - 128,6
H
72,8
H - 128,6
68,4
7,00 GND
HOLE
LIGHT
CHANNEL
LIGHT
CHANNEL
MOUNTING
CHANNEL
100,2
FULL PANEL
G
G
2,4
G
17,9
G
A
A -A
D D
W
W 29,2
- 20,3 W/2 - 24,5
85,7
64,7
85,7
W/2 -2,4
24,5
A
2,4
17,9
64,7
W - 20,3
64,7
W
D
W
2,4
Mountig panel
A20P6F1GE
A20P8F1GE
A20P10F1GE
A20P12F1GE
A20P6F1GE
A20P8F1GE
A20P12F1GE
A20P16F1GE
A18P6F1GE
A18P8F1GE
A18P10F1GE
A18P12F1GE
A18P6F1GE
A18P8F1GE
A18P10F1GE
A18P12F1GE
GG
Material
304
304
304
304
304
304
304
304
304
304
304
304
304
304
304
304
Usable space:
A - 88,9
B - 88,9
GLAND PLATE
GROUNDING
GLAND
PLATE
STUD
GROUNDING
STUD
104,3
Description
A2066SSFS IP66 StSt304 w.plinth
A2086SSFS IP66 StSt304 w.plinth
A20106SSFS IP66 StSt304 w.plinth
A20126SSFSD IP66 StSt304 w.plinth
A2068SSFS IP66 StSt304 w.plinth
A2088SSFS IP66 StSt304 w.plinth
A20128SSFSD IP66 StSt304 w.plinth
A20168SSFSD IP66 StSt304 w.plinth
A1864SSFS IP66 StSt304 w.plinth
A1884SSFS IP66 StSt304 w.plinth
A18104SSFS IP66 StSt304 w.plinth
A18124SSFSD IP66 StSt304 w.plinth
A1866SSFS IP66 StSt304 w.plinth
A1886SSFS IP66 StSt304 w.plinth
A18106SSFS IP66 StSt304 w.plinth
A18126SSFSD IP66 StSt304 w.plinth
104,3
Part number
A2066SSFS
A2086SSFS
A20106SSFS
A20126SSFSD
A2068SSFS
A2088SSFS
A20128SSFSD
A20168SSFSD
A1864SSFS
A1884SSFS
A18104SSFS
A18124SSFSD
A1866SSFS
A1886SSFS
A18106SSFS
A18126SSFSD
A30S4E Free-Stand Single and Dual Access enclosure
STANDARD PRODUCT; DUAL ACCESS
Part number
A2088SSFSDA
A20108SSFSDA
A20128SSFSDAD
A20168SSFSDAD
A2088SS6FSDA
A20108SS6FSDA
A20128SS6FSDAD
A20168SS6FSDAD
Description
A2088SSFSDA IP66 StSt304 w.plinth
A20108SSFSDA IP66 StSt304 w.plinth
A20128SSFSDAD IP66 StSt304 w.plinth
A20168SSFSDAD IP66 StSt304 w.plinth
A2088SS6FSDA IP66 StSt316L w.plinth
A20108SS6FSDA IP66 StSt316L w.plinth
A20128SS6FSDAD IP66 StSt316L plinth
A20168SS6FSDAD IP66 StSt316L plinth
Material
304
304
304
304
316L
316L
316L
316L
Size HxWxD [mm]
2000x800x800
2000x1000x800
2000x1200x800
2000x1560x800
2000x800x800
2000x1000x800
2000x1200x800
2000x1560x800
F [mm]
999,6
999,6
999,6
999,6
999,6
999,6
999,6
999,6
G [mm]
875,1
875,1
875,1
875,1
875,1
875,1
875,1
875,1
Mountig panel
A20P8F1GE
A20P10F1GE
A20P12F1GE
A20P16F1GE
A20P8F1GE
A20P10F1GE
A20P12F1GE
A20P16F1GE
*D – double doors with centerpost
A
LIGHT
CHANNEL
A-A
A -A
CENTER SUPPORT
(only for double door)
29,2
MOUNTING
CHANNEL
A
7,00 GND
HOLE
G
LIGHT
CHANNEL
51,7
41,3
DOOR
GROUNDING
STUD
BODY
GROUNDING
STUD
DOOR
GROUNDING
STUD
22,2
100,2
22,2
104,3
100,0
85,7
A
B
MOUNTING
CHANNEL
F
G
F
BODY
GROUNDING
STUD
63,9
100,0
85,7
63,9
87,5
DOOR
GROUNDING
STUD
25,4
W/2 - 88,2
44,5
51,7
41,3
67,5
67,5
44,5
HALF PANEL
W - 55,8
25,4
1 8 1 ,0
W - 55,8
181, 0
H
W - 88,9
H - 128,6
H - 171,5
H
H - 128,6
44,5
H - 171,5
68,4
72,8
25,4
100,2
FULL PANEL
G
G
2,4
GG
W/2 - 24,5
29,2
85,7
64,7
64,7
85,7
W/2 - 24,5
A
GLAND PLATE
GROUNDING
BODY
STUD
GROUNDING
STUD
Usable space:
A - 88,9
B - 88,9
GLAND PLATE
GROUNDING
STUD
REMOVABLE
CENTERPOST
Modification - Design Your Standard options
Window kits
AWDH3024N4SS
AWDH2016N4SS
APWK2919NFSS
APWK711NFSS
*UL 508A Listed
Studs, nuts
Sunshield tops
NEMA 4X, IP66
Deep hinged window kit stainless steel 316L*
Deep hinged window kit stainless steel 316L*
Shallow window kit stainless steel 304**
Shallow window kit stainless steel 304**
**UL 508A Component Recognized 4X
For cut-outs
Size WxD (mm)
Size WxD (mm)
600x400
600x400
800x400
800x400
1000x400
1000x400
1200x400
1200x400
Stainless steel accessories:
•data pocket,
•door stop kit,
•selected hardware (screws, studs, nuts….)
•sunshield top 304 or 316L
EQUIPMENT PROTECTION
FREE-STAND SINGLE AND DUAL ACCESS ENCLOSURE
716x512x69mm
462x308x69mm
800x546mm
343x241mm
Size WxD (mm)
600x400
800x400
1000x400
1200x400
104,3
2,4
17,9
A
W - 20,3
D
W
D
W
2,4
A30S4E Free-Stand Single and Dual Access enclosure
ACCESSORIES and Panels
ACCESSORIES
Part number
ALGDSTOP2E
PLEM20SS
PLEM20SS6
LEDA1S35
LEDA2S35
LEDD1S35
LEDD2S35
Description
ALGDSTOP2E door stop for large enclosures
PLEM20SS kit with four lifting eyes 304
PLEM20SS6 kit with four lifting eyes 316L
LEDA1S35 LED light, AC Switch*, screw
LEDA2S35 LED light, AC Motion **, screw
LEDD1S35 LED light, AC Switch*, screw
LEDD2S35 LED light, AC Motion**, screw
Size
M20x30mm
M20x30mm
36x52x351mm
41x52x351mm
36x52x351mm
41x52x351mm
Operating voltage
90-260 VAC
90-260 VAC
20-60 VDC
20-60 VDC
*Switch activation by on/off door switch **Motion activation by IR motion sensor
Panels
Part number
A20P6F1GE
A20P8F1GE
A20P10F1GE
A20P12F1GE
A20P16F1GE
A18P6F1GE
A18P8F1GE
A18P10F1GE
A18P12F1GE
Description
A20P6F1GE Full mounting plate
A20P8F1GE Full mounting plate
A20P10F1GE Full mounting plate
A20P12F1GE Full mounting plate
A20P16F1GE Full mounting plate
A18P6F1GE Full mounting plate
A18P8F1GE Full mounting plate
A18P10F1GE Full mounting plate
A18P12F1GE Full mounting plate
Door stop for large enclosure
For cabinet sizes HxW[mm]
2000x600
2000x800
2000x1000
2000x1200
2000x1560
1800x600
1800x800
1800x1000
1800x1200
A [mm]
1794,6
1794,6
1794,6
1794,6
1794,6
1594,6
1594,6
1594,6
1594,6
LED lights
B [mm]
496,7
696,7
896,7
1096,7
1462,5
496,7
696,7
896,7
1096,7
Panels
www.pentairprotect.com
Europe
North America
middle east & INDIA
Asia
Straubenhardt, Germany
Tel: +49.7082.794.0
Minneapolis, MN
Tel: +1.763.421.2240
Dubai, United Arabian Emirates
Tel: +971.4.37.81.700
Shanghai, P.R. China
Tel: +86.21.2412.1688
Betschdorf, France
Tel: +33.3.88.90.64.90
Mexico, D.F.
Tel: +52.55.5280.1449
Bangalore, India
Tel: +91.80.6715.2001
Singapore
Tel: +65.6768.5800
Warsaw, Poland
Tel: +48.22.209.98.35
Toronto, Canada
Tel: +1.416.289.2770
Istanbul, Turkey
Tel: +90.216.250.7374
Shin-Yokohama, Japan
Tel: +81.45.476.0271
Dzierzoniow, Poland
Tel: +48.74.64.63.900
Seoul, Korea
Tel: +82.2.2129.7755
Hemel Hempstead, Great Britain
Tel: +44.1442.24.04.71
Lainate, Italy
Tel: +39.02.932.714.1
Moscow, Russia
Tel: +7.495.926.18.85
Aachen, Germany
Tel: +49.2405.40996-0
Pentair, Hoffman and Design with Confidence are owned by Pentair or its global affiliates. All other trademarks are the
property of their respective owners.
© 2015 Pentair
Spec-01105