The VC01, PS01 and VCPS02 range of products provide convenient local control of volume and program
(source or channel) selection, from attractive wall plate mounted rotary selectors. Up to 12 controls may be connected (via a simple 2 wire interface per control) to a BMB01 unit mounted either locally or at the equipment rack. All controls may be configured to affect multiple or single system inputs and outputs as required.
Variants:
VC01-P Single gang plastic panel mounted volume control
VC01-M Single gang metal panel mounted volume control
PS01-P Single gang plastic panel mounted program selector
PS01-M Single gang metal panel mounted program selector
VCPS02-P Double gang plastic panel mounted volume control and program selector
VCPS02-M Double gang metal panel mounted volume control and program selector
For further details on how to configure the VC01, PS01 and VCPS02, please refer to the
VC01 / PS01 / VCPS02 product manual, the DSP Router manual, and the BMB01 product manual or visit www.asl-control.co.uk.
ASL Document Ref.: 450_VCPS_Sales.doc
Issue: 1 complete, approved - Date: 12/11/09

VC01 / PS01 / VCPS02 Remote Volume Controls and Program Selectors
General
Supply voltage range............................................................5V DC max from BMB01 analogue Input
Current consumption ............................................................................................................. 1mA max
Dimensions and Weight
Single gang
Dimensions (H x W x D) ..................................................................................85mm x 85mm x 53mm
Weight .......................................................................................................................................... 100g
Double gang
Dimensions (H x W x D) ................................................................................145mm x 85mm x 53mm
Weight .......................................................................................................................................... 190g
Environmental
Temperature (storage and operating) ...........................................................................
− 5°C to + 50°C
Humidity range .........................................................................................0% to 93% Non-condensing
This equipment is designed and manufactured to conform to the following EC standards:
EMC EN 55103-1 Environment E1, EN 55103-2 Environment E5
Failure to use the equipment in the manner described in the product literature will invalidate the warranty.
Manufacturer
A ‘Declaration of Conformity’ statement to the above standards, and a list of auxiliary equipment used for compliance verification, is available on request.
Application Solutions Limited
Head Office: The Riverside Centre - Railway Lane
Lewes - East Sussex - BN7 2AQ - UK
Tel: +44(0)1273 476608 Fax: +44(0)1273 478888
Voice Alarm Direct: Tel: +44(0)1273 405411 Fax: +44(0)1273 405415 www.asl-electronics.co.uk
All rights reserved.
Information contained in this document is believed to be accurate, however no representation or warranty is given and Application Solutions Limited assumes no liability with respect to the accuracy of such information.
Issue: 1
Page 2 of 2