technical data huddig 1260
standard equipment
Cab
• Tilting cab
• Tinted glass
• Large opening sunroof
• Driver’s seat with safety belt
• Opening side windows
• Folding passenger seat with safety belt
• Prepared space under driver’s seat for
voltage transformer etc.
• Windscreen washers and wipers with
intermittent front and rear
• Storage space
• Rear view mirrors 2 interior, 2 exterior folding
• Moulded floor mat
• Fire extinguisher 6 kg
• Sun visors front and rear
• Adjustable steering wheel
Lighting
• Work lamps front x 2 (halogen)
• Work lamps rear x 2 (halogen)
• Rotating warning lamp with pivoted mounting
• Automatic interior lighting
• Automatic reversing lamp
Gauges
• Speedometer
• Other gauges integrated in display
Brake system
• Dual circuit brake system
• Electrically operated parking brake
• Automatic service brake (can be disengaged)
Backhoe
• Electric servo operated
• Hydraulic tool mounting
• Hose rupture protection valve
Load unit
• Electric servo operated
• Prepared for 3rd hydraulic function
• Safety bar
• Heating system for hydraulic oil
• Lockable toolbox on left hand front wing
• Hose rupture protection valve on support legs
• Belly plates front and rear
• Safety start for the engine
• Electronic control system with 4 adjustable
operating settings.
• Foot operated electric inch pedal
Buckets
• Digging bucket G-85 with Kverneland teeth, 420 l
• Front bucket 2.50 m, volume 1450 l with scraper
edge in rear face
Huddig 1260 is fire protection certified
Central warning
• The electronic control system alarms using
flashing lamps and buzzers and shows text
messages in the display
Other
• Double command
• 12V and 24V power outlet
• Automatic main circuit breaker
• Toolkit
• Engine heater
accessories
Backhoe
• Quick hitch for 50 mm pins
• Oil-Quick
• Hydraulic output, double action
Grab John type
• Hydraulic motor output, handheld tool type
• Hydraulic motor output, brush cutter type etc
• Pipe kits for boom for hydraulic motor output
• Hydraulic output for rototilt
• Hydraulic output for rototilt at Oil-quick
• Double float position
• Hydraulic output for cable feeder
• Pipe kit extra hydraulic quick coupling
• Piston rod protection for bucket cylinder
Loader
• Tool lock including 3rd hydraulic function
• 3rd hydraulic function
• 3rd function continuous
• Float position
• Load suspension
Cab
• Tilting rear windscreen
• Automatic climate control
• Driver’s seat, air sprung
• CD-player with radio + 2 speakers
• Cab heater output
• Work lamps 6 x extra
• Extra rotating warning lamp
• Head restraint
• Sun visors side windows x 2
• Output lunchbox heater
• Heated rear view mirrors
• Extension kit to elevate the cab 100 mm
Other
• Several colour options
• Several tyre options
• Environmentally friendly oil, operating
hydraulics
• Thicker belly plates
• Central lubrication, prepared
• 7-pin towing connection
• Tow hitch including pin
• Tow hitch for cable ploughing mounted
on outrigger support leg
• Protective plates at pivot
• Diesel heater cab and engine (7 day timer)
• Fuel filling pump, electric
• Generator 100 A
• Lockable toolbox, on right hand front wing
• Cruise Control
• Air Sentry
• Triple R
• Bracket for lift
• Huddig Lift
• Remote control
• Railway equipment
• Safety equipment
Tool loader
• Front buckets
• Grading buckets
• Snow buckets
Tool backhoe
• Digging buckets
• Cable buckets
• Slope buckets
• Grid buckets
• Pusher buckets
• Grading cutters
• Asphalt cutter
• Ground frost hook
• Crane arm 2 m
technical data huddig 1260
45°
Specifications with standard buckets and
520/70x34 wheel fittings
A Transport length
8,630 mm
B Wheelbase
2,600 mm
C Backhoe overhang
1,100 mm
D Height above cab
3,110 mm
E Transport height backhoe
4,380 mm
F Transport length backhoe
2,300 mm
G Ground clearance
515 mm
H Ground clearance angle, outrigger
support legs 32°
I Maximum width outrigger
support legs
3,700 mm
Engine
Cummins turbocharged diesel engine
Model
QSB 6,7 Tier III
Power output
116kW (157 hp) at 1900 rpm
Type
Straight 6-cylinder water cooled
Cylinder volume
6.7 l
Torque
662 Nm at 1100 rpm
Transmission
Hydrostatic.
Gearbox ZF with 2 gears
Speeds 1st 0-10 km/h low ratio
Speeds 2nd 0-42 km/h high ratio
The transmission system is separated from the
operating hydraulics.
Axles
ZF. Automatic differential brake with planetary
hub reduction gears.
Wheel equipment
Standard front and rear 520/70x34
Brake system
Transport brakes:
Servo assisted disc brakes
Parking brake: Spring applied disc brake
Service brake: Automatic engagement of
transport brake when stationary
(automatic function can be disengaged)
Steering system
Hydrostatic Orbitrol control system with dual
cylinders in the centre pivot
Width outrigger support legs,
parked position J Width front bucket
K Width over wheels
r1 Swing radius outside bucket r2 Swing radius outside wheels
2,460 mm
2,500 mm
2,470 mm
6,288 mm
5,760 mm
Backhoe
L Reach
M Depth
N Load height
O Digging width
6,530 mm
4,900 mm
3,770 mm
4,200 mm
Steering angle Frame oscillation ±32°
±8°
Electrical system
Voltage Batteries Generator output Starter motor output Hydraulic system
Load sensing hydraulic with variable axial piston
pumps, 60cc + 100cc (connected to stepped-up
pump distribution box provides a total 174cc). The
hydraulic system is prepared for Huddig approved
environmentally compatible hydraulic oils.
Operating pressure:
23.3 MPa (233 Bar)
Nominal max flow at 1,000 rpm
176 l/min
Nominal max flow at 1,500 rpm
264 l/min
Nominal max flow at 2,000 rpm
352 l/min
Weight (incl buckets): Volumes
Oil engine
Cooling system
Fuel system
Hydraulic oil tank
Hydraulic system total
12,850 kg
Hydrostatic incl tank
Hydrostatic tank
Gearbox
Front and rear axles Differential and hub reduction
30
20
3
24
Parallel linkage loader
Maximum lifting force
61.5 kN (6150 kp)
Max breaking force at
bucket edge
60 kN (6000 kp)
Recommended bucket volume, soil
1-1.4 m3
Recommended bucket volume,
light materials
2-2.5 m3
Backhoe
Breakout force at bucket edge 103 kN (10300 kp)
Digging force at bucket pivot
63 kN (6300 kp)
Lifting force at max reach
without bucket
19.1 kN (1910 kp)
Maximum slewing torque
3700 kpm
Recommended bucket volume approx. 350-450 l
dm3 (l)
15
20
160
185
340
The machines shown in the brochure have additional equipment.
We have a program of continuous product development and we
reserve the right to make changes.
Manufacturer:
Dealer:
Huddig AB
Box 1054, SE-824 12 Hudiksvall
Tel +46 650 375 00 Fax +46 650 375 01
E-mail info@huddig.se www.huddig.se
24V
2 x 12V, 110 Ah
70A alternating current
5.8 kW
Front loader P Reach
2,630 mm
Q Lift height leveled bucket
3,500 mm
R Load height 45° tilted bucket
2,690 mm
S Reach 45° tilt angle
1,030 mm
T Max. tilt angle
63°
U Load angle
40°
U1 Load angle in carrying position
46°
V Tilt angle ground plane
112°
X Excavation depth
90 mm
1260
1260 SERIES
Stronger, more fuel efficient and better loo
T
he new Huddig 1260 has been modified and improved in several ways. The new, powerful Cummins QSB 6.7 stage 3 engine puts
Huddig 1260 in a class of its own. It is stronger than ever and now has 36% higher torque than before. It also has Common-Rail h
sure injection, which gives optimal fuel economy.
Huddig 1260 has a much rounder shape. The hood is now made of glass fibre reinforced plastic and is in three sections. Each part
open and close, which means easier servicing and access to the engine. It has also received cleaner lines; radiator, air cleaner and sil
now under the body. The view between the loader and hood has also been improved. Huddig 1260 has an entirely new electrical an
tronics system. The previous system has been replaced by a new central computer and information display. The service intervals are
and communication with individual machines, can now be carried out remotely via GSM.
New designs for the front and side panels. All information about the machine’s settings and functions are shown on the information display.
S
Improved torque and lower
fuel consumption
Momentkurvor
Torque
curves 1160D/1260
1160D/1260
700
650
oking
is easy to
lencer, are
nd elece extended
Moment Nm
Torque
Nm
550
500
450
400
350
The hood is in three sections, which means easier access to the
engine.
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
Rek. arbetsvarvtal operating speed
Recommended
Huddig1260
Huddig
1260
Rek. arbetsvarvtal
Speed
VarvtalRpm
rpm
Cummins QSB 6.7 Stage 3
Cummins Eddy5.9, Stage 2
Huddig1160D
Recommended
operating speed
Huddig 1160D
860D/1060
"The increased cylinder Momentkurvor
volume, together
with the
Common-Rail injection system, gives the new Huddig
1260 the best possible fuel economy and improved
550
torque.
500
Huddig 1260 has optimised torque so that the
engine produces maximum output at the speeds the
450
backhoe loader uses most, i.e. between 800-1300 rpm.
400
This is an improvement of 36% compared to the previous model.
600
Moment Nm
s the new
high pres-
600
350
300
250
800
900
Varvtal rpm
1000
1100
1200
1300
1400
1500
1600
Rek. arbetsvarvtal
Huddig 1060
Rek. arbetsvarvtal
Huddig 860D
1700
1800
1900
2000
2100
Huddig first with remote diagnostics
Huddig Telematic means that Huddig's technicians,
or Huddig's authorised service agents, can carry out
both diagnostics and updates directly in the backhoe
loader’s central computer, regardless of where it is in
the world - as long as there is GSM coverage! For safety and system integrity no one can call the machine
without the operator’s knowledge and approval.
A message on the information display must be acknowledged by pushing a button, before contact can
be established with the service technician's computer.
Unauthorised personnel cannot connect to the system, as the software is password protected.
With a new powerful electronic control system the Huddig 1260 is well
equipped to meet the future...