Orión
CLASS II
IP 66 - IK 10
L A N T E R N S
ORiÓN
Orión
122 |
lighting
MATERIALS
Chassis - Frame
Polyamide Reinforced with Fibre Glass submitted to tropicalzed treatment against ultra violet radiations U.V.
Diffuser
Tempered Glass of 5mm thickness.
Optical Block
Technical Polymer of Engineering
MAINTENANCE
No need for maintenance.
Clean with water and detergent, from inside and out side
using a sponge.
Easy access to lamp without tools.
Independent and exportable gear tray for easy
manipulation.
COVERINGS
Materials submitted to treatments and coverings that gives
them the following characteristics:
Reflectors
Anodised Aluminium .
Ant-adherent
Prevents the adherence of dust and adhesive labels.
Easy to clean from graffiti, indelible markers, etc, without changing any properties. Except black colour.
Swivel
Stainless Steel
CHARACTERISTICS
Resistance to ultra violet radiations U.V
Submitted to 3.000 hours in U.V radiation chamber according
to UNE-53.104/86 without presenting colour alteration.
Insulation
CLASS II
Protection Grade
Hermetically Sealed IP66-Impact IK10.
Vandal Proof
Employed materials, and constructive characteristics
(diffuser of 4mm thickness of one piece) makes ATP lanterns
very resistant to impact superior to IK10 established by the
norm UNE-EN 50102/A1.
Fixing
Possibility to fix with stainless steel swivel over smooth
sufeces, or with adapter on top of column or bracket of Ø
60.
COLOURS
The modular construction of the material permits, the combination of colours.
Finishing with metallic particles.
Other RAL colours are available upon demand.
CERTIFICATION - HOMOLOGATION
Indicate if mounting is with adapter or swivel.
Possibility for inclination 5º each step.
ORIÓN
GUARANTEE
10 Years, see page 9.
1
7
1. Reflector
2. Lamp holder
3. Gear tray
4. Disconnecting plug
5. Swivel
6. Closing latch
7. Cover
8. Control gear
8
2
6
3
4
2
3
5
General Catalogue 2007/2008 | 123
L A N T E R N S
Mounting instructions are available in:
www.atpiluminacion.com
TECHNICAL DATA
Utilization Factor Curves
Relative ISOLUX Diagram
100%
150º 165
180
165
Polar diagram
150º
135º
135º
STREET
SIDE
LADO
CALZADA
320 cd
80%
240 cd
120º
120º
160 cd
105º
60%
105º
80 cd
52,1%
90º
90º
75º
75º
60º
60º
-0,0H
40%
20%
18,6%
45º
45º
0%
30º
-1,5H
-0,5H 0,0H 0,5H
1,5H
2,5H
It shows the percentage of light flow
which reaches the street and the sidewalk, indicating the most adequate
orientation of the street light lantern.
15º
0º
15º
Referring to the nominal flow of 1.000
lanterns and one installation height of 1
m. it represents the curves of equal luminance projected over the same surface.
The deferent optics the can be mounted
inside the floodlight Mod. ORION
Coverts it in a polyvalent floodlight,
which provide lighting solutions for:
1- Parking areas, amusement zones,
sports zones and reinforcement lighting
in zones of walk passes because of the
combination of symmetric and asymmetric reflectors.
2- Public lighting and tunnels with optical
block, that permits position modification
of the lamp providing adequate lighting
solution in each case.
3- For lighting monuments, walls and old
towns.
4- Adequate for hummed atmospheres of
high salt levels like coasts and maritime
uses.
ORIÓN
0,0H
Imax= 396 Cd.
Asymmetric Optic
L A N T E R N S
LADO ACERA
WALKWAY
SIDE
30º
In this diagram we observe the out-put
of the lantern and the possible light contamination that can result. All the flow
beyond the horizontal (90o) is a wasted
flow.
In the Polar Diagram 3 plans are presented:
- The plan C=90o-270o perpendicular to
the street (Red).
- The plan C=0o-180o longitudinal to the
street (Green).
- The plan of maximum intensity (Blue).
CONTROL GEARS
The lanterns of ATP are supplied according to its maximum
power with:
· Compact Gear with electrical ignitron capacitive coil
· Standard Control Gear equipped with:
- Reactor with thermo protector
- Condensers with Silicon Cable
- Independent ignitor that provides longer life-time for the
control gears
- Relies of commutation.
ELECTRICAL COUPLING:
Certified by CELENEC, HAR Mark.
- Minimum Internal Sections of 1,5 mm2
- Isolated with inflammable Silicones class VO (Autoextinguishing).
- Double isolated hose with silicone class VO.
ALL ATP LANTERNS ARE SUPPLIED WITHOUT LAMP.
ATP offers you, without cost, its lighting calculation program ATP WIN, with full technical support of
our technical office for studies and projects
124 |
lighting
ORIÓN
463
248
Diffuser
5mm thickness tempered glass diffuser
See description page 123.
REF
Image: Orión - dark gray - transparento - light gray
674
IP 66 - IK 10
610
CLASS II
Supplied with
Lamp holder, optical block and control
gear even in double level (DL).
LAMP. DESCRIPTION
ORION-150 W HPS
ORION + E-40 + 150 W HPS or DL
ORION-150 W HPS-B
ORION + RX7S-24 + 150 W HPS or DL
ORION-250 W HPS
ORION + E-40 + 250 W HPS or DL
ORION-250 W HPS-B
ORION + FC-2 + 250 W HPS or DL
ORION-400 W HPS
ORION + E-40 + 400 W HPS or DL
ORION-400 W HPS-B
ORION + FC-2 + 400 W HPS or DL
ORION-600 W HPS
ORION + E-40 + 600 W HPS or DL
ORION-150 W MH
ORION + E-27 + 150 W MH
Mod. 400
ORION-150 W MH-B
ORION + RX7S-24 + 150 W MH
ORION-250 W MH
ORION + E-40 + 250 W MH
ORION-250 W MH-B
ORION + FC-2 + 250 W MH
ORION-400 W MH
ORION + E-40 + 400 W MH
Wind surface:
1.20 cm2
Weight without gear:
10 Kg.
10 Years Guarantee (see page 9)
Technical description see page 124
ORION-400 W MH-B
ORION + FC-2 + 400 W MH
Mod. 250
General Catalogue 2007/2008 | 125
L A N T E R N S
ORIÓN
When preparing your order please indicate desired: COLOUR & COMBINATIONS.