230
® three-dimensional trademark
40 mm
70 mm
100 mm
133 mm
SELF-CONTAINED 1H OR 3H - EASY MAINTENANCE - 2 T5 OR T8 LAMPS (1 SELF-CONTAINED LAMP) - CLASS 1
VOLTA 133
EASY MAINTENANCE
IMPERVIOUS TUBULAR LIGHT
FITTING
FOR REPLACEMENT LIGHTING
REPLACEMENT LIGHTING
NF 60598-2-22
Maintained and non-maintained
Automatic testing according to IEC 62034
LED indicator light
TUBULAR
Increased mechanical resistance
Easy to clean
Limited dirt accumulation
360° orientation
DESCRIPTION
PHOTOMETRY
HOUSING
1 • T8 version without reflector
2 • T8 version with reflector
3 • T5 version with reflector
• Ø133 mm crystal quality polycarbonate Diffuser
• End caps 1/2 ring press-formed in 304L stainless
steel (316L also available)
• Gaskets moulded in EPDM
• Cable entry with cable gland (disconnectable plug
available)
• Possibility for a model with 2 cable entries for
looping-in (2 entries on the same cap)
GEAR TRAY
• White powder coated steel sheet gear tray,
indexed in rotation and lockable
• Emergency unit with automatic duration and
function tests for self-contained luminaires
• Push-button to launch tests manually
• Battery lifetime 1h or 3h
• Internal wiring with silicon isolated wires braided
with glass fibre
IMPERVIOUS (IP68/IP69K)
Absolute imperviousness
No internal dust accumulation
Maximum light output
Adapted for pressure cleaning
EASY MAINTENANCE
REFLECTOR
Easy opening and closing with just one
screw
Relamping without need to remove the gear
tray
• White powder-coated gear tray serving as a
reflector for general diffused lighting
• Extensive reflector in mirror finish aluminium,
available on option
DURABLE
INSTALLATION – MAINTENANCE
High resistance to corrosion and external
aggression
Robustness of the housing, quality of the
materials and components: long-term
investment
• Connection to 4x2,5mm² detachable terminal block
• Installation with 2 bolt-fitted stainless steel
straps with variable centre distance and allowing
360°orientation (available in a reinforced model
and/or with closure using a HSHC screw)
• Maintenance by removing the end cap and sliding
the guided gear plate (patented system)
ELECTRICAL CLASS
CLASS 1
EMEGENCY POWER FLUX (ACCORDING TO POWER)
1-hour emergency mode
450 to 725 lm
3-hour emergency mode
100 to 250 lm
FIRE RESISTANCE
PROTECTION
SHOCK RESISTANCE
OPERATING TEMPERATURE
960°C
IP68/IP69K
IK10
0°C +30°C
ƞ=91%
ƞ=89%
ƞ=77%
231
DIFFICULT ENVIRONMENTS
Variable centre distance
MAIN REFERENCE
SELF-CONTAINED 3-HOUR VERSIONS
Electronic gear unit for T8 lamps
2x36W
200
VOL133 S3H 236E G13 PO 116
2x58W
175
VOL133 S3H 258E G13 PO 116
Electronic gear unit for T5 lamps
2x35W
250
VOL133 S3H 235E G5 PO 116
2x54W
100
VOL133 S3H 254E G5 PO 116
L (MM)
WEIGHT (kg)
2218 0010
2218 0020
1355
1655
5,2
6,2
2218 0030
2218 0040
1595
1295
6,2
5,2
2218 0050
2218 0060
1355
1655
5,6
6,7
2218 0070
2218 0080
1595
1295
6,7
5,6
ATEX
OPTICS
HOT AND COLD
CODE
SELF-CONTAINED 1-HOUR VERSIONS
Electronic gear unit for T8 lamps
2x36W
450
VOL133 S1H 236E G13 PO 116
2x58W
525
VOL133 S1H 258E G13 PO 116
Electronic gear unit for T5 lamps
2x35W
725
VOL133 S1H 235E G5 PO 116
2x54W
600
VOL133 S1H 254E G5 PO 116
SPECIAL APPLICATIONS
EMERGENCY LIGHTING POWER
FLUX MINI (lm)
DESIGNATION
OPTIONS
OPTION CODE
116/216
113LN/213LN
PS5
DESCRIPTION
OPTION CODE
OPTICS
Extensive reflector
RE
FINISHINGS
End caps and fixing straps in 316L stainless steel
MR
FIXINGS
Reinforced bolt-fitted fixing straps
BRS
Fixing straps with HSHC screw*
BAV
Fixing straps reinforced with HSHC screw*
BRV
(*Tamper-resistant Torx screw on request)
ACCESSORIES
Protective covers
Fixing for columns
Cable suspension kits
Upstand kits (5 or 20 cm)
Option codes to be added or to replace the designation codes of main references, subject to the compatibility of options.
BAES
CABLE ENTRIES
1 or 2 cable glands in black polyamide
Cable Ø: 7 to 14mm
1 or 2 cable glands in nickel-coated brass
Cable Ø: 5 to 14mm
Disconnectable plug
Straight IP68/IP69K plug, lockable
with an aluminium threaded ring
LSC
REPLACEMENT
EMERGENCY LIGHTING
ARCHITECTURAL APPLICATIONS
DESCRIPTION
NORMAL ENVIRONMENTS
POWER