PROJECT INFORMATION
Job Name
MIGHTY MAC™
Fixture Type
SQDA SERIES
Catalog Number
Approved by
PRODUCT FEATURES:
»»Surface ceiling mount – 12"×12" (30.48cm×30.48cm)
»»TIG welded housing with no post grinding for additional strength
»»Vertically adjustable bracket secured to housing via thru-studs
SPECIFICATIONS
HOUSING: One-piece die-formed prime grade material as specified – see ordering information. Corners continuously seam welded and smooth with no post grinding (TIG).
LENS: As specified – maximum thickness .625" (1.59cm) – see ordering information. Kenall recommends a prismatic inner lens and a clear outer lens. Two clear lenses used in combination cannot
be provided.
LENS RETENTION: Vertically adjustable continuous “Z” brackets of prime grade material, secured to housing via thru-studs (6" (15.24cm) maximum spacing).
DOOR: One-piece die-formed prime grade material as specified – see ordering information.
HINGE: Staked and welded external piano hinge (1/2" (1.27cm) knuckle/1/8" (.32cm) diameter pin) standard. See Options for Full Length (IHF) Internal Hinge.
FASTENERS: Hardened security screws as specified – see ordering information. Fully recessed.
FINISH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAMPS: Quantity and type as specified – see ordering information. Lamps supplied by others.
BALLAST: All fluorescent ballasts UL listed class P. All HID ballasts UL listed HPF type. Optional removable reflector/lamp/ballast tray with quick disconnect.
LUMINOUS SEAL: Polyurethane foam prevents light leaks from luminaire base.
PHOTOMETRICS: Efficiency of SQDA-0/0-1-13-120-1/G-1 = 55.6%. For photometric information, go to www.kenall.com.
LISTINGS: UL and CUL listed for damp locations. See ordering information for wet location applications.
ORDERING INFORMATION (Ex: SQD-A-0/0-1-70S-120-8/B-1)
Model
SQD
Size
A
Hsg./Door Material
Lamp Qty
Lamp Type
Voltage
Lens (Inner/Outer)
/
Fasteners
Options
/
Lamp Quantity
Nominal Size
One (INC, 2D, & HID only)
A
12"×12" (30.48cm×30.48cm) 1
2Two
3
Three (13 Watt Twin only)
Housing/Door Material
0
14-Ga CRS (Painted White)
Lamp Type
1
16-Ga CRS (Painted White)
13 13 Watt Twin
2* 18-Ga CRS (Painted White)
13E 13 Watt (4) Pin Twin
3
14-Ga SS (Painted White)
13Q 13 Watt Quad
4
16-Ga SS (Painted White)
26Q 26 Watt Quad
6
14-Ga SS (Brushed)
28D 28 Watt 2D
7
16-Ga SS (Brushed)
38D 38 Watt 2D
50S† 50 Watt HPS
70S† 70 Watt HPS
70M†70 Watt MH
150I†150 Watt Incandescent
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
DT 120/277 Volts (HID only)
www.kenall.com
P: 800-4-Kenall
Lens (Inner/Outer)‡
0
No Lens
1
.125" (.32cm) Prismatic Acrylic
2
.125" (.32cm) Prismatic Polycarbonate
3
.125" (.32cm) Textured Polycarbonate
G
.125" (.32cm) Clear Polycarbonate
4
.156" (.40cm) Prismatic Polycarbonate
R
.156" (.40cm) Prismatic Tempered Glass
6
.187" (.47cm) Prismatic Polycarbonate
7
.187" (.47cm) Clear Polycarbonate
8
.187" (.47cm) Clear Tempered Glass
9
.250" (.64cm) Clear Polycarbonate
A
.250" (.64cm) Clear Tempered Glass
B
.375" (.95cm) Clear Polycarbonate
C
.375" (.95cm) Clear Tempered Glass
J
.500" (1.27cm) Clear Polycarbonate
P
.500" (1.27cm) Clear Tempered Glass
Fastener
1Torx® Head w/ Center Pin
2
Allen Head w/ Center Pin
F: 262-891-9701
Options
EL• Standard Lumen EL Pack
SEL• Specified EL Pack
DLN LED Night Light w/Light Level Control
(100% - 20%)
FS Single Fuse & Holder
IHF Full Length Internal Hinge
QR Hot restrike system for maximum
100-Watt DC Bayonet Quartz Lamp
QS Quartz Socket Only
RGT Removable Gear Tray (Fluorescent only)
TN PL Night Light – 5/7/9/13 Watt
(Lamp supplied by other) (120/277V only)
WL Wet Location Listed
*n/a as Door Material
•Fluorescent Only
†Glass interior lens required
‡ Refer to lens specifications
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
SQDA-102015
For additional photometry, go to www.kenall.com
MIGHTY MAC™
SQDA SERIES
DIMENSIONAL DATA
CROSS SECTION
MOUNTING HOLES
12.50"
31.75cm
(4) .62" (1.57cm) Mounting Holes
Ø2.00" (Ø5.08cm) Wiring Hole
6.50"
16.51cm
6.00" SQ.
15.24cm SQ.
12.50" SQ.
31.75cm SQ.
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
SQDA-102015