BUY AMERICAN ACT OF 2009 COMPLIANT
FINELITE
Series 8-P and 8-I Technical Sheet
Date
Project
Type
Comments
Optional Rounded Endcap
S8-I 100% Indirect
DESCRIPTION
Series 8 adds dramatic elegance and style to any setting. Available with two rows
of perforations (S8-P) or 100% indirect (S8-I), Series 8 looks modern and beautiful in any application. S8-P distributes light approximately 97% indirect and 3%
direct. The Series 8 family also includes Series 8-FP (fully perforated) and Series
8-PW (perforated with windows). See separate technical sheets for each.
Series 8 - Perforated
Series 8 - Indirect
3.0"
3.0"
9.25"
9.25"
DIMENSIONS / LAMPING:
STANDARD PLUG-TOGETHER WIRING
STANDARD DIE-FORMED JOINER
Available in 1, 2 or 3 T8 lamp cross sections.
An injection molded aligner sleeve (shown in
place) fits into the internal joiner.
An internal die-formed joiner reinforces the joint
for strength.
ORDERING GUIDE
Sample Number: S8-P - 32’ - 2T8 - SC - 91W - 277 - AC 18” - FE - C1 - 0.88
S8-P
Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Please visit www.finelite.com for most current data.
CTK0014.11/11
Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • 510 / 441-1100 • Fax: 510 / 441-1510 • www.finelite.com
© 2011 FINELITE, INC. ALL RIGHTS RESERVED.
Finelite Series 8-P (Perforated), Series 8-I (Indirect)
Run length (4', 8', 12' multiples standard)
Number of lamps in cross section (1, 2, 3 T8)
Circuiting (SC-single circuit, DC-dual circuit)
Reflector system (91W, EP)
Voltage (120, 277, 347V)
Mounting (AC/FA/Stem)
Endcap FE (flat), RE (rounded)
Ceiling type (C1-1" T-bar, C2-9/16" T-bar, C3-Slot Grid, C4-Hard Ceiling)
Ballast Factor (Standard 0.88 for T8 lamps)
BUY AMERICAN ACT OF 2009 COMPLIANT
FINELITE
Series 8-P and 8-I Technical Sheet
PHOTOMETRY
1350
1350
450
450
S8-P: 2 T8 - 91W
S8-P: 2 T8 - EP
1500
500
S8-I: 2 T8-91W
Distribution: 100% Up
Distribution: 93% Up / 7% Down
Distribution: 96% Up / 4% Down
Efficiency: 77.9%
Efficiency: 81.8%
Efficiency: 93.1%
Peak Candela Value: 1199@ 180˚
Peak Candela Value: 1206@ 155˚
Peak Candela Value: 1225@ 165˚
LSI Report 48499
LSI Report 48502
LSI Report 48508
CANDLEPOWER SUMMARY
0
5
15
25
35
45
55
65
75
85
90
95
105
115
125
135
145
155
165
175
180
0.0
108
108
100
87
68
49
31
18
9
2
0
53
254
464
661
835
979
1091
1165
1200
1199
22.5
108
108
102
91
76
60
43
27
15
10
8
167
357
499
675
848
989
1094
1165
1200
1199
45.0
108
108
105
97
82
68
55
41
28
17
20
210
492
663
761
873
996
1103
1167
1198
1199
67.5
108
107
109
101
89
79
67
54
41
27
17
225
564
751
874
934
1014
1104
1165
1191
1199
90.0
108
106
108
100
90
81
71
58
44
30
34
224
594
780
914
962
1025
1106
1166
1191
1199
CANDLEPOWER SUMMARY
Flux
10
30
44
51
52
48
40
29
19
201
485
629
693
687
627
508
330
114
0
5
15
25
35
45
55
65
75
85
90
95
105
115
125
135
145
155
165
175
180
0.0
335
63
59
52
42
31
20
12
6
2
0
45
216
407
584
741
874
975
1044
1077
1079
22.5
335
63
59
55
47
37
27
18
11
8
7
182
426
580
745
870
947
1009
1058
1078
1079
45.0
335
62
63
59
51
42
34
25
18
12
17
194
594
798
896
1009
1087
1103
1079
1081
1079
67.5
335
62
65
61
55
47
40
32
25
17
9
216
646
949
1037
1093
1163
1173
1103
1077
1079
90.0
335
60
64
60
55
48
42
34
26
18
24
208
658
978
1098
1153
1203
1206
1121
1081
1079
CANDLEPOWER SUMMARY
Flux
6
17
26
32
32
29
24
19
13
90
95
105
115
125
135
145
155
165
175
180
0.0
0
60
289
537
763
966
1131
1261
1349
1388
1388
22.5
0
205
474
680
859
1019
1156
1267
1345
1385
1388
45.0
0
232
627
839
1023
1141
1231
1304
1354
1384
1388
67.5
0
238
695
950
1120
1243
1299
1336
1357
1376
1388
90.0
0
229
725
986
1151
1282
1329
1352
1364
1376
1388
Flux
222
607
800
886
875
771
603
383
132
202
556
745
788
758
664
506
307
103
— Refer to www.finelite.com for additional photometry and product information.
SPECIFICATIONS
CONSTRUCTION: Body is 20-gauge die-formed steel
with 18-gauge die-formed internal joiner system, plugtogether wiring standard. All components are
hard-tooled to tolerances of 0.010".
Precision-punched 0.062" diameter perforations (P)
cover the bottom side of the fixture in two parallel
columns. Optional: Series 8 100% Indirect (I).
ENDCAPS: Flat Endcap (FE) standard, 18-gauge dieformed steel endcaps, add 0.1" at each end.
REFLECTORS: Die-formed prepainted aluminum,
(91W). Virgin acrylic UV-stabilized lens diffuser over
perforations is standard. Optional: Extended
Performance Reflector System (EP). Optional Dust
Cover for T8 lamps only. Contact factory.
CORNER: Optional one piece die-formed 90°
corner. Consult Factory.
ELECTRICAL: 120 or 277V prewired. Fixture and electrical components are UL/C-UL listed and fixture will
bear UL/C-UL labels. Optional Adders: 347V prewired,
dual circuit, emergency circuits, emergency battery
packs. Contact factory.
LAMPING: Available in 1, 2, or 3 T8 lamp cross
sections.
BALLAST: Electronic instant-start ballast <10% THD,
0.88 BF is standard. Specify ballast factor if not standard (contact factory). Optional adders: rapid-start
ballasts, 347V, emergency battery packs, dimming
ballasts (controls by others).
MOUNTING OPTIONS: Semi-adjustable aircraft cable,
(AC) ± 0.5" in lengths of 12", 15", 18", 21", 24", 27", 30",
and 36". Order length, e.g., AC 18". Optional Adders:
fully adjustable aircraft cable (FA) in lengths up to 250".
Rigid stems (Stem).
SUPPORT CABLES: Plated steel cable and hardware.
FEED: 18-gauge straight cord. 14-gauge feed cord
used when fixture current exceeds 5 amps. Optional
Adders: Coil Cord Feed, Rigid Stem Feed.
FINISHES: Signal White standard. Optional Adders:
185 colors available from Tiger Drylac’s RAL color
chart.
LENGTHS: 4', 8', and 12' section lengths can be
combined to make longer runs. Contact factory for
additional lengths.
WEIGHT: Fixture weight = 5.0 lb/ft.
SEE ALSO: Series 8-FP (fully perforated), and Series 8PW (perforated with windows) technical sheets.
Due to continuing product improvements, Finelite reserves the right to change specifications without notice. Please visit www.finelite.com for most current data.
CTK0014.11/11
Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • 510 / 441-1100 • Fax: 510 / 441-1510 • www.finelite.com
© 2011 FINELITE, INC. ALL RIGHTS RESERVED.
Optional: Rounded Endcap (RE), injection molded
sculpted endcap with 0.100 " reveal. No exposed
fasteners, holes or knockouts. Rounded Endcap adds
5.105" at each end.
ACCESSORY: Optional Dust Cover, clear acrylic. NOTE:
Will significantly impact light level performance.
Consult Factory.