SPECIFICATION SHEET
2700 John St., Markham, ON L3R 2W4, Canada
L E D L I G H T PA N E L
Toll Free: 1-866-766-0509 | Fax: 905-479-0201 | www.DLC-LumiSheet.com
RGB LED Light Panel
E346146
• AVAILABLE IN CUSTOM SIZES & SHAPES
E325925
F E AT U R E S & B E N E F I T S
• CAN BE USED IN “FRAMELESS” DESIGNS
• 3D V-CUTTING TECHNOLOGY
• MULTI-COLOR OPTION
• HIGH BRIGHTNESS (2,000 - 10,000 LUX)
• PATENTED HEAT SINK TECHNOLOGY TO
MAXIMIZE LED LIFESPAN (70,000 HOURS)
• LOW POWER CONSUMPTION
(70% LESS THAN FLUORESCENT)
• ENERGY SAVING AND MAINTENANCE FREE
• SUPERIOR CONSISTENT LIGHT QUALITY
• ADVANCED 3-YEAR WARRANTY
The LumiSheet RGB Light Panel is designed to emit a bright, even output of light across the entire surface of the
panel. Unlike traditional light panels, which have the light source mounted on the exterior of the LGP (Light Guide
Plate), LumiSheet integrates high brightness LEDs and heat sink into our exclusive 3D V-cutting LGP which makes
it possible to produce "frameless", rectangular or special shaped LED light panels for various application needs.
P RO F I L E O F LU M I S H E E T RG B L E D L I G H T PA N E L
Depth 25/64" (10mm)
Optical Acrylic Panel
Width Max. 49" (1250mm)
LED Chip
25/64"
(10 mm)
LED Strip
Length Max. 105" (2680mm)
Integrated Heat Sink
RGB Light Panel Applications
P.1
Power lead:
Standard: 5' (1500mm) length with bare wire end.
The power lead can be located around the perimeter of the panel
as required by the size of the panel, or the back of the panel.
LumiSheet RGB Specification
SPECIFICATION SHEET
L E D L I G H T PA N E L
2700 John St., Markham, ON L3R 2W4, Canada
Toll Free: 1-866-766-0509 | Fax: 905-479-0201 | www.DLC-LumiSheet.com
LED Light Location
LED light along 1 long edge
LED light along 2 long edges
Width LESS than
12" (305mm)
Width GREATER
than 12" (305mm)
Max (L): 105" (2680mm)
LEDs
Max (L): 105" (2680mm)
LEDs
LED light along all 4 edges
FOR SQUARE PANELS
For example: 36" x 36" or 48" x 48"
LEDs
**This is only recommended for when
panels are "nearly" square. It is not
recommended for long narrow panels.
Illuminated Face Options
Single Face Illumination (Standard)
Double Face Illumination (Option)
Illuminated Front Face
Non-Illuminated Back Face
(with reflective white backer)
LumiSheet RGB Specification
Both Front and Back Face Illuminated (no reflective white backer)
P.2
SPECIFICATION SHEET
L E D L I G H T PA N E L
2700 John St., Markham, ON L3R 2W4, Canada
Toll Free: 1-866-766-0509 | Fax: 905-479-0201 | www.DLC-LumiSheet.com
Specifications
LumiSheet - RGB LED Light Panel
Electrical
Input Voltage
12 Volt DC
Power Consumption
Max 5.0 Watts/ft
Wire Size
20 AWG 4 wire
Wiring
Each panel must have direct connection to power supply. Do not wire panels in series
Connector
Bare wire. Standard 5' (1500mm), Optional 10' (3000mm)
Certification
UL / cUL (E346146, E325925)
Physical
Color Temperature
RGB - Full color
Mounting
Wall mounted with screws, Z-clips, U-channel, mirror clips or Mounting with Stand offs
Operating Temperature
- 30 °C ( - 22 °F ) ~ + 40 °C ( + 104 °F )
Environment
Dry location only (Standard)
Wet location (Custom)
Minimum Size
2"W x 2"L x 25/64" D (50mm x 50mm x 10mm)
Maximum Size
49"W x 105"L x 25/64"D (1250mm x 2680mm x 10mm)
Weight
2.35 lbs /sq. ft.
11.45 kg/sq. M
Accessories
RGB Control
Stand alone or DMX control
Plug-In Power Adaptors
Power Adaptors
12V DC, 1A, 12W, UL listed
12V DC, 5A, 60W, UL class 2 listed
Hardwire Power Adaptors
PA-60W-HW
60W 12V Hardwire power adaptor
Input 110V AC ~ 240V AC
Power Adaptors:
Color Temperature:
PA-150W-HW:
150W 12V Hardwire power adaptor
Input 110V AC ~ 240V AC
RGB
49"(1,250mm)
Max Size
Min Size
2" (50mm)
105" (2,680mm)
Max Size & Min Size
49" (1,250mm)
Max Size
72" (1,800mm)
E346146
Min Size
2"(50mm)
E325925
LumiSheet can be made from min. 2"(50mm) X 2"(50mm) to max. 49"(1,250mm) X 105" (2680mm)
P.3
LumiSheet RGB Specification
SPECIFICATION SHEET
L E D L I G H T PA N E L
2700 John St., Markham, ON L3R 2W4, Canada
Toll Free: 1-866-766-0509 | Fax: 905-479-0201 | www.DLC-LumiSheet.com
Installation Tips
Single Panel
Multi-Panel
Side View
0.25" (6mm)
Diffuser or Graphic
1.5" (38mm) space between Panels and Graphic / Diffuser
0.75" (19mm)
3D View
LED Panels
1.5"
LEDs
LED Panels
Typically LEDs are installed along a groove 0.25" away from the
edge. To completely hide the LED light source (Hot Spots), recess the light panel into the fixture / frame by a minimum of
0.75" distance.
Diffuser or Graphic
When placing panels side by side to form a longer panel, you
may see a "hot line" where they meet. To avoid this you can
use a diffuser (9mm thick or more) or leave a space (gap) of
1.5" or more between the light panel and front graphic etc.
Typical Power Cord Exits
Standard 1
Standard 2
Power cord exits from short side (edge) corner (standard)
Power cord exits from the middle of each long side for
Lumisheet longer than 6 ft
Option 1
Option 2
Power cord exits from the back side of Lumisheet
Recessed (notched) power cord exits
LumiSheet RGB Specification
P.4
SPECIFICATION SHEET
2700 John St., Markham, ON L3R 2W4, Canada
L E D L I G H T PA N E L
Toll Free: 1-866-766-0509 | Fax: 905-479-0201 | www.DLC-LumiSheet.com
Surface Mounting
P.5
Option 1
Option 2
Screw mounting with pre-drilled holes
Mounting with mirror clips
Option 3
Option 4
Mounting with Z-clips
Mounting with Stand offs
LumiSheet RGB Specification
SPECIFICATION SHEET
2700 John St., Markham, ON L3R 2W4, Canada
L E D L I G H T PA N E L
Toll Free: 1-866-766-0509 | Fax: 905-479-0201 | www.DLC-LumiSheet.com
PHOTO
E346146
E325925
RGB Controllers
RGB OPTION 1: LUMISHEET RGB LED LIGHT PANEL - MINI RGB CONTROLLER AND REMOTE
KC-32-MINI Mini RGB RECEPTOR (controller)
3 CHANNEL RGB CONSTANT VOLTAGE CONTROLLER
- MAX. 5A PER CHANNEL
- 12V
- DIMMENSIONS: 177MM L X 45 MM W X 21 MM D
- WEIGHT: 95G
Controller
FEATURES:
- RF SIGNAL
- MULITIPLE COLOUR CYCLE OPTIONS
- 8 SPEED ADJUSTMENT LEVELS
- BRIGHTNESS CONTROL
- INDIVIDUAL COLOUR CONTROL
KS-RGB-L01 RF REMOTE
- RADIO FREQUENCY - 433KHZ
- 2 X AAA BATTERIES
REMOTE
Operation Button
➀
➃
➄
MODE
Change the color mode
➁
SP+
Flash / Fading speed plus
➂
SP-
Flash / Fading speed minus
➃
BR+
Bright plus
➄
BR-
Bright minus
➅
R
Increase / Decrease Red by
or
➆
G
Increase / Decrease Green by
or
➇
B
Increase / Decrease Blue by
or
➀
➁
➂
➅
➆
➇
FEATURES:
- 3 CHANNEL RGB CONSTANT VOLTAGE CONTROLLER, THE
MAX CURRENT OF EACH CHANNEL UP TO 5A
- MULTI-COLOR MODE TO SELECT (FLASHING / FADING)
- CAN SET TO ANY STATIC COLOR
-CAN ADJUST THE BRIGHTNESS FROM 0 TO 100%
- 8 SCALE SPEED
- LEARN IN FUNCTION, NEVER MISS WITH OTHER
RECEPTOR OR REMOTE CONTROL
- RF
- ONE REMOTE CAN BE SYNCHRONIZED TO CONTROL
MULTIPLE CONTROLLERS
- SETTINGS REMAIN IN MEMMORY EVEN WHEN POWERED
OFF
Wiring
12VDC
Output
GND
+
+
_
Mini RGB Controller
KC-32-mini
R
G
B
LumiSheet RGB Specification
White
Red
Green
Black
RGB LED Light Panel
(up to 60W Max.
each Channel)
P.6
SPECIFICATION SHEET
2700 John St., Markham, ON L3R 2W4, Canada
L E D L I G H T PA N E L
Toll Free: 1-866-766-0509 | Fax: 905-479-0201 | www.DLC-LumiSheet.com
RGB OPTION 2: LUMISHEET RGB LED LIGHT PANEL - DMX CONTROLLOR
DMX‐KEY(KC‐24/5A‐Decoder)
RGB Color Controller/Decoder
PART NUMBER
INPUT POWER
OUTPUT
DMX STANDARD
SIZE
WEIGHT
STORAGE TEMPERATURE
ADDRESS SETTING IN DMX MASTER
MODE
KC‐24/5A‐DECODER
DC12V
R, G, B, V+ (12V), MAX 60W EACH CHANNEL
DMX512/1990
204 (L) X 44 (W) X 25 (H) MM
115G
‐15 TO 85 DEGREES
THERE ARE 3 DIGITS ON THE UNIT FOR SETTING ADDRESS. PRESS
THE “‐“ ON TOP OR THE “+” BELOW THE 3 DIGITS TO DECREASE OR
INCREASE THE ADDRESS NUMBERS.
If the addresses of a DMX-KEY is set between 71x – 99x, the unit is automatically set as the DMX Master. The first 2 digit numbers
“71” to “99” represent the pre-set programs while the 3rd digit indicates the color changing speed. “0” indicates a slow speed and
“9” indicates a fast speed. For a list of all the pre-set programs available, please refer to the list below.
Program No.
70
71
Description
OFF
Seven Color Jumping
Remark
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Seven Color Fading
Seven Color Jumping and Fading
Seven Color Tail Chasing
Seven Color Water Flowing
Execute programs 71, 72, 73, 74, 75 and repeat
Red
Green
Blue
Yellow
Purple
Cyan
White
Red Fading
Green Fading
Blue Fading
Yellow Fading
Purple Fading
Cyan Fading
White Fading
Seven Color Fading Recycle
Red Flashing
Green Flashing
Blue Flashing
Yellow Flashing
Purple Flashing
Cyan Flashing
White Flashing
Seven Color Flashing
Seven color refers to the colors in 77
- 83 below
In DMX decoder mode, all 3
digits are used for address setting. The address ranges from
001 to 512. The decoder changes
colors according to incoming
DMX signals. When the address
is set between 001‐512, the
DMX‐KEY functions as a DMX
decoder (DMX slave) and the
pre‐set programs do not function. The decoder changes colors
according to incoming DMX
signals. There is one address
difference between “R”, “G” and
“B”. For example if Red is 001,
then Green is 002, and Blue is
003. To operate each decoder
independently, you must offset
each address by 3 (e.g. 001, 004,
007, …).
For example, to synchronize all
decoders all addresses can be
set as 001.
** Please Contact DLC for wiring instructions
P.7
LumiSheet RGB Specification
SPECIFICATION SHEET
Plug-In Power Adaptor
L E D L I G H T PA N E L
2700 John St., Markham, ON L3R 2W4, Canada
Power Supply (DSA-12G-12FUS)
Toll Free: 1-866-766-0509 | Fax: 905-479-0201 | www.DLC-LumiSheet.com
12 Watt Plug-In Power Supply; Input Voltage: 110AC - 240AC
2 3/4" (70mm)
68" (1730mm)
1" (25.4mm)
1 5/8" (41mm)
Power Supply (PA-60W-i5)
60 Watt Plug-In Power Supply; Input Voltage: 110AC - 240AC
9 1/16" (230mm)
60" (1500mm)
70" (1800mm)
7 7/8" (200mm)
1 1/2" (38mm)
1 1/4" (32mm)
Class 2
Hardwire Power Adaptors
Power Supply (PA-60W-HW)
60 Watt 12V Hardwire Power Supply ; Input Voltage: 110AC - 240AC
9 1/16" (230mm)
1 1/2" (38mm)
70 7/8" (1800mm)
7 7/8" (200mm)
1 1/4" (32mm)
Class 2
Power Supply (PA-150W-HW)
150 Watt 12V Hardwire Power Supply ; Input Voltage: 110AC - 240V AC, IP65 Outdoor Rated
8 7/8" (222.2mm)
7 13/16" (198.2mm)
11 13/16" (300mm)
1 1/2" (38mm)
11 13/16" (300mm)
Order Information
LumiSheet - RGB LED Light Panel
Series #
LLP 12
10mm RGB 12V
Size
Color Temperature
Length x Width (inch/mm)*
- CS - Custom shape
- RGB - Full Color
(drawing may be required)
Illuminated Face
Option
- SFI - Single face*
- DFI - Double face
-
-
Cable Length
- WL15 -5' (1500mm) power cord with
free leads*
- WL30 - 10' (3000mm) cord with
free leads
-
LED Location
-
L1 - LED along 1 long edge
L2 - LED along 2 long edges*
S1 - LED along 1 short edge
S2 - LED along 2 short edges
S4 - LED along All 4 edges
CI - Custom Illumination
* Denotes standard configuration of rectangular or square light panel
Series #
-
LLP12
-
Size
Length x Width (inch/mm)*
LumiSheet RGB Specification
24" x 36"
-
Color Temperature
-
Illuminated Face
Option
-
Cable Length
-
LED Location
RGB
-
SFI
-
WL15
-
L2
P.8