PARADOX 7
CATALOG
NUMBER
7” Architectural In-Grade
NOTES
TYPE
DESCRIPTION
Specifications
L:
15”
381 mm
9”
229 mm
8”
203 mm
W:
H:
Hydrel’s Paradox Series sealed modular in-grade
luminaires are multi-purpose units designed for up
lighting architectural and landscape features. These
units can be flush mounted into a variety of substrates
including concrete or tile, or landscape materials, and
are ideal when aperture size or luminaire depth is a
priority.
EXAMPLE: PDX7 B 35CMT6 MVOLT NSP FLC 34S RG GEB LPI
ORDERING INFORMATION
PDX7
B
35CMT6
MVOLT
NSP
Model*
Material*
Lamp Type*
Voltage*
Light Distribution*
Lens*
PDX7
SS
Stainless
Steel
Low Voltage1
HID12
123
NSP
FLC
M20
MR11 GZ4 base
20MHCP9,18
Narrow
Spot
Flat Lens
Clear
Brushed
Stainless
Steel
M35
MR11 GZ4 base
20MHCG10,18 GU6.5 base
2403,18
SP
Spot
FLCAS13
M50
NFL
Narrow
Flood
Flat Lens
Clear,
Anti-Slip
MFL
Medium
Flood
FLCSR13
WFL
Wide Flood
FL17
Flood
Flat Lens
Frosted,
Slip
Resistant
WWD7
Wall Wash
Distribution
BSS13
B
Bronze
MR16 GX5.3 base
12,15
20CMT4
T4 G8.5 base
277
M75
MR16 GX5.3 base
35CMT412,15
T4 G8.5 base
23050HZ19
P3650
PAR36, screw terminal base
70CMT412,15
T4 G8.5 base
24050HZ19
P3675
PAR36, screw terminal base
16
35CMT6
T6 G12 base
AR11135
G53 base
70CMT616
T6 G12 base
MVOLT6
(120-277)
AR11150
G53 base
P2035CM
PAR20 medium base
AR11175
G53 base
P3035CM
PAR30 medium base
Incandescent
34S
1204,18
PGJ5 base
P3070CM
PAR30 medium base
P2038I
PAR20, med. base
R11135CM
GX5.3
P3038I
PAR30, med. base
R11170CM
GX8.5
P3075I
PAR30, med. base
Fluorescent5
2
18TRT14
Triple Tube, GX24q2 base
26TRT14
Triple Tube, GX24q3 base
RG
GEB
LPI
Conduit Entries*
Accessories
Options
Lamp*
34S18
Internal
Ballasting
LPI
25S19
Two 3/4” NPT Side
(Standard)
Two 25mm Side
IHL
Honeycomb Louver
WWL8
Wall Wash Internal Louver
LSF
Linear Spread Filter
GEB6
3,18
FLC
Listing
Lamp Included
Electronic Ballast
IEC19
International
Electrotechnical
Commission
External
RG
Decorative Rock Guard
Suitable For Wet Locations
*Required Entries
Notes:
1 Low voltage only available in with 120, 240, 277 inputs.
2 Incandescent models are available with 120 Volt only.
3 Available for Low Voltage lamps only.
4 120 Volt only available with low voltage and incandescent lamps.
5 18TRT or 26TRT available with MVOLT only.
6 GEB required on HID lamps.
7 Available with T4 G8.5 base, 20MH PGJ5 base, and 20MH G46.5 base.
8 Available only with WWD distributions.
9 Philips Mini MasterColor available in 20W and 120V only.
10 GE Mini UltraMax available in 20W and120V only.
11
12
13
14
15
16
17
18 19 Available with electronic ballast only.
HID lamps only valid with MVOLT and GEB.
Not available with Decorative Rock Guard.
Available only in MFL light distribution.
Available with NSP, MFL and WWD only.
Available with NSP, MFL and WFL only.
Only available with PAR lamps.
Only for use in 60HZ applications.
Only for use in 50HZ applications.
NOTE: Hydrel Reserves The Right To Modify Specification Without Notice. Any dimension on this sheet is to
be assumed as a reference dimension: “Used for information purposes only. It does not govern manufacturing
or inspection requirements.” (ANSI Y14.5-1973)
20660 Nordhoff St., Suite B • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2014 Acuity Brands Lighting, Inc.
5/27/14
PDX7
FEATURES & SPECIFICATIONS
DOOR MATERIAL: Die cast bronze or stainless steel.
HOUSING: Compression molded polyester with patent pending internal direct access junction
box for through-branch wiring. Internal junction box provides 44in3 volume to ensure proper seal
during installation. The housing is U.V. stabilized, impact and corrosion resistant for use in all
types of environments. The housing has a side-car configuration and houses the lamp and power
module components as well as the lens/ door finishing section.
LAMP TYPE:
Low Voltage: MR11 GZ4 base, 35W max.
MR16 GX5.3 base, 75W max.
AR111 G53 base, 75W max.
Incandescent: PAR20, PAR30, medium base
HID: T-4 or T-6 bi-pin base, 70W max.
PAR-20 or PAR-30 medium base, 70W max
Color Corrected Metal Halide
Fluorescent: Triple tube CFL 4-pin base, 26W max.
REFLECTORS: (Non-reflectorized lamps): High purity anodized specular or semispecular materials in various distributions provide maximum performance and uniformity.
Lamps can be aimed 15° from vertical and rotated 360°. All configurations available with
Hydrel’s patented Aim-Lock® indexed and locking components to allow re-lamping and
maintenance without re-aiming.
LENS/SEAL: Tempered clear flat borosilicate glass. The patent pending door / lens seal
uses proprietary knife edge technology to secure the assembly to the housing. Three
captive screws hold the assembly in place. The lens is notched to provide maximum
aperture opening.
CONDUIT ENTRIES: Two molded ¾” NPT side entries standard, bottom hubs are molded
with a ¾” NPT membrane knockout.
ACCESSORIES: Decorative rock-guard, internal glare control, anti-slip lenses, and color
filter options available. See ordering guide for complete list of accessories.
If a specific lamp is desired, specify manufacturer’s lamp number, most lamps can be supplied.
(lamp included)
BALLAST: Integrally mounted ballast, encapsulated in heat-dissipating epoxy resin,
prewired for easy installation and maintenance. Ballasts starting temperature is -30°.
VOLTAGE: See ordering guide.
FINISH: Natural bronze or stainless steel with a brushed finish.
LIGHT DISTRIBUTION: Narrow spot through wide flood available. See ordering guide for
complete list of distribution options.
LISTING: U.L., C.U.L
20660 Nordhoff St., Suite B • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2014 Acuity Brands Lighting, Inc.
5/27/14
PDX7