UTS Series Eliminate the need for hard wiring systems with the NEW Souriau UTS threaded receptacles NPT, PG & M threaded receptacle - Threads into existing installation allowing for easy conversion from a hard wired to pluggable solution NPT, PG & M threaded receptacle UL 1977 qualified Fire & smoke: UL94-VO IP68/69K + UV resistant Hexagonal shape No need to change drilling pattern when using the UTS threaded receptacle as your connector solution! Easy qualification of your System by regulation authorities Suitable for public environment Suitable for outdoor use Easy to fasten to a box with standard wrench Connection Technologies UTS Series UTS range overview The UTS series offers a range of plastic connectors rugged enough to withstand industrial applications. UTS series is available with a diverse range of options..... Everything from power & signal connectors, box mounted receptacles, cable mounted plugs, cable mounted in-line and PCB mounted receptacles. A full range of wire termination options include: Crimp, Solder and Screw. The bayonet coupling system makes it simple to use. With only a 1/3 twist of the coupling ring, connectors are mated with an audible and sensitive “click”. Screw termination version The philosophy of the UTS series is built around three key elements: Dynamic IP68/69K UV Resistant UTS series is rated at IP68/69K… even in dynamic conditions. This means that it remains sealed even when used continuously underwater or cleaned using a high pressure hose and cable is moving. In most applications, our connectors are exposed to extreme climatic conditions; it was therefore key for us to select the materials best able to cope with the targeted environment. This extreme level of performance is achievable with jacketed cable or discrete wires. Part of our product qualification process involved subjecting connectors to a simulated five years of exposure to various elements including Temperature, UV and Humidity. If this same level of performance is required when connectors are not mated, we offer the UTS Hi Seal; a product designed to remain watertight if an environmental cap is not fitted or if the equipment is likely to get wet when cables have been disconnected. The results were positive in that there were no visible signs of weakness, such as cracking. 2 UL/IEC Compliant The utmost priority for any electrical installation is to protect personnel from any shock hazard. In North America, Underwriters Laboratories requires connector manufacturers to respect their standards based on application use. In Europe and in Asia, IEC standards are better known and trusted by end users. Like its American equivalent, the IEC refers to safety rules. The UTS series was obviously designed to respect these rules. UTS Series Layout Shell size Contact size 106 - 10E6 6 x #20 (Ø 1.0) M16x1.5 thread 10 10E7 7 x #20 (Ø 1.0) M16x1.5 thread 14 142G1 3 x #8 (Ø 3.6) NPT 1/2” thread 183G1 4 x #8 (Ø 3.6) NPT 3/4” thread 18 2 18X2M3 2 x #8 (Ø 3.6) + 3 x #16 (Ø 1.6) NPT 3/4” thread Contact identification positions shown are for mating face of pin contact connectors and wire face of socket contact connectors. 3 UTS Series 142G1 Layout OR OR OR WITH Specifications Contact type Crimp contacts supplied separately see page 7 Connector type Backshell Free hanging receptacle Part number Male insert Female insert Cable gland (Fig.1) UTS1JC142G1P UTS1JC142G1S Without (Fig.3) UTS6142G1P UTS6142G1S Cable gland (Fig.4) UTS6JC142G1P UTS6JC142G1S Jam nut receptacle Without (Fig.2) UTS7142G1P UTS7142G1S NPT threaded receptacle Without (Fig.5) Plug 4 UTS7142G1SNPT UTS Series 142G1 2 + ground 40A/300V per IEC 61984 Dimensions Free hanging - UTS1 Jam nut receptacle - UTS7 70 1.6 35.1 Ø31.5 Ø22.3 18 3.5 30.4 Fig. 1 Fig. 2 Plug - UTS6 33 70 Ø31.5 Ø35.1 Male Female 25.3 Fig. 3 Fig. 4 NPT threaded receptacle - UTS7 12.1 25.4 25.4 Ø22.1 23.2 NPT - 1/2˝ 23.2 Fig. 5 Panel cut out NPT .3 T 18 N P 2 1/ 2.1 24.5 4.2 Jam nut receptacle - UTS7 Drilling pattern 25.9 3.6 3.6 Note: All dimensions in mm unless otherwise noted. 5 UTS Series 142G1 Accessories and tooling Jam nut sealing caps Hand tool Metal terminal Part number Part number UTS14DCG UTS14DCGR Part number M317 Plug sealing cap Positioner + locator setting Part number UTS614DCG Plastic protective cap Part number VGE10078A Extraction tool Part numbers Receptacle cap Plug cap 85005588A 85005597 Color coding rings Part number Part numbers G for Green Y for Yellow R for Red Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG 51060210936 * Add G for Green, Y for Yellow, R for Red 6 UTS Series 142G1 2 + ground 40A/300V per IEC 61984 Contacts Crimp #8 Contact type Machined Part number AWG Male Max wire Ø Female 16 82913601A(1) 82913600A(1) 1.72 14 (1) 82913603A (1) 82913602A 2.22 12 82913605A(1) 82913604A(1) 2.82 10 (1) 82913607A (1) 82913606A 3.50 82913609A(1) 82913608A(1) 4.35 8 Max insulator Ø 6.5 (1): Example E ample of plating, plating for other plating see page 26 Electrical characteristics UTS 142G1 derating curves Current (A) 50 UL 44A 600V UL94 V-0 45 40 Test conditions CSA 30A 600V UL94 V-0 35 30 25 Contact used: Machined contacts Wires used: 8.37mm² IEC 40A 300V 4kV 3 20 15 10 5 0 0 20 40 60 80 100 120 Ambient Operating Temperature (°C) Current use 7 Limited use Not recommended use UTS Series 183G1 WITH Specifications Contact type Crimp contacts supplied separately see page 11 Part number Connector type Backshell NPT threaded receptacle Without (Fig.1) UTS7183G1PNPT UTS7183G1SNPT Plug Without (Fig.2) UTS6183G1P UTS6183G1S Plug Cable gland (Fig.3) UTS6JC183G1P UTS6JC183G1S 8 Male insert Female insert UTS Series 183G1 3 + ground 32A/300V per IEC 61984 Dimensions NPT threaded receptacle - UTS7 14.4 31.8 31.8 Ø28.5 Ø19.5 17.2 NPT - 3/4˝ Fig. 1 Plug - UTS6 81.3 Ø42 Ø42 37.5 Fig. 2 Fig. 3 Mated connector length - UTS6JC 90.5 Panel cut Drilling pattern NPT 5.1 5.1 5.1 5.1 .4 T 23 N P 4 3/ Note: All dimensions in mm unless otherwise noted. 9 UTS Series 183G1 Accessories and tooling Jam nut sealing caps Hand tool Metal terminal Part number Part number UTS18DCG UTS18DCGR Part number M317 Plug sealing cap Positioner + locator setting Part number UTS618DCG Plastic protective cap Part number VGE10078A Extraction tool Part numbers Receptacle cap Plug cap 85005590A 85005599 Color coding rings Part number Part numbers G for Green Y for Yellow R for Red Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG 51060210936 * Add G for Green, Y for Yellow, R for Red 10 UTS Series 183G1 3 + ground 32A/300V per IEC 61984 Contacts Crimp #8 Contact type Machined Part number AWG Male Max wire Ø Female 16 82913601A(1) 82913600A(1) 1.72 14 (1) 82913603A (1) 82913602A 2.22 12 82913605A(1) 82913604A(1) 2.82 10 (1) 82913607A (1) 82913606A 3.50 82913609A(1) 82913608A(1) 4.35 8 Max insulator Ø 6.5 (1): Example of plating, plating for other plating see page 26 Electrical characteristics UTS 183G1 derating curves Current (A) 50 45 UL 44A 600V UL94 V-0 40 35 Test conditions CSA 26A 600V UL94 V-0 Contact used: Machined contacts Wires used: 8.37mm² IEC 32A 300V 4kV 3 30 25 20 15 10 5 0 0 20 40 60 80 100 120 Ambient Operating Temperature (°C) Current use 11 Limited use Not recommended use UTS Series 106 - 10E6 Layout y OR OR OR OR WITH Specifications Contact type Crimp contacts supplied separately see page 15 Hand solder electrical contacts loaded Connector type Backshell Free hanging receptacle Cable gland (Fig.1) Part number Male insert Female insert UTS1JC106P UTS1JC106S Plug Without (Fig.2) UTS6106P UTS6106S Plug Cable gland (Fig.3) UTS6JC106P UTS6JC106S Jam nut receptacle Without (Fig.4) UTS7106P UTS7106S Square flange receptacle Without (Fig.6) UTS010E6P UTS010E6S Without (Fig.2) UTS610E6P UTS610E6S Cable gland (Fig.3) UTS6JC10E6P UTS6JC10E6S Jam nut receptacle Without (Fig.5) UTS710E6P UTS710E6S PCB contacts supplied separately see page 15 Jam nut receptacle Without (Fig.4) UTS7106P UTS7106S Hand solder electrical contacts loaded M16 threaded receptacle Without (Fig.7) Plug UTS710E6PM16 UTS710E6SM16 Sealed unmated nmated 12 UTS Series 106 - 10E6 6 contacts 7A/32V per IEC 61984 Dimensions Free hanging - UTS1 Plug - UTS6 33 70 63.2 Ø26.2 Ø15.1 Ø26.2 Male Female 25.3 Fig. 2 Fig. 1 Jam nut receptacle - UTS7 Fig. 4 Fig. 3 Square flange receptacle - UTS0 22.5 12.3 24 20.8 Ø15.1 27.2 Ø15.1 18.3 7.5 3.5 2.3 3 Ø3.2 M16 threaded receptacle - UTS7 21.5 Front view Fig. 6 Front view Fig. 5 Mated connector length 24 70.9 Ø15.1 UTS0 UTS7 77.3 M16x1.5 5 13.9 Fig. 7 Panel cut out Square flange receptacle - UTS0 Ø3.3 Drilling pattern Jam nut receptacle UTS7 M16 Chf.45°x2.65 Ø3.1 15° 15° 1.6 Ø17.7 18.5 x1 .5 16 Ø22 Rear mounting Ø17.9 19.6 3.3 .9 17 Ø4 M Front mounting Ø15.2 16.7 18.5 Ø13.5 2.8 Note: All dimensions in mm unless otherwise noted. 13 UTS Series 106 - 10E6 Accessories and tooling Jam nut sealing caps Handle Tool kit Metal terminal Part number Part number Part number Part number UTS10DCG UTS10DCGR SHANDLES TOOLKIT Crimp tooling Plug sealing cap Square flange sealing cap Metal terminal Part number Part number UTS610DCG UTS10DCGE Contacts Plastic protective cap Part numbers Receptacle cap Plug cap 85005586A 85005595 RM/RC 24W3K(1) RM/RC 20W3K(1) RM/RC 18W3K(1) SM/SC 24W3S(2) SM/SC 24WL3S(3) SM/SC 20W3S(2) SM/SC 20WL3S(3) Gasket Part numbers / neoprene Part numbers Y for Yellow R for Red Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG Standard contacts #20 Ø 1mm (1): Example of plating, for other plating see page 26 (2): contact reeled (3): loose contact UTFD12B Color coding rings G for Green Contact size * Add G for Green, Y for Yellow, R for Red 14 Part number of head S20RM S20RM S20RM S20SCM20 S20SCM20 S20SCM20 S20SCM20 UTS Series 106 - 10E6 6 contacts 7A/32V per IEC 61984 Contacts #20 Contact type Crimp Machined Female Max wire Ø Max insulator Ø RM24W3K(1) RC24W3K(1) 0.80 1.60 (1) (1) 22-20 RM20W3K RC20W3K 1.15 1.60 20-18 RM18W3K(1) RC18W3K(1) 1.30 2.1 26-24 SM24W3TK6(2) SC24W3TK6(2) - 0.90-1.60 SC24W3S25(2) - 0.90-1.60 (2) (2) SM24W3S6 (2) SM20W3TK6 SC20W3TK6 - 1.20-2.10 22-20 SM20W3S6(2) SC20W3S25(2) - 1.20-2.10 - RMW5016K RCW5016K - - 22-20 Machined (3) Male 26-24 26-24 Stamped & formed reeled contacts PCB Part number AWG (1): Example of plating, for other plating see page 26 (2): Loose piece contact available if putting L. Example: SM20ML1-TK6 Electrical characteristics UTS 106 - 10E6 derating curves Current (A) UTS 106 UL 5A 250V UL94 V-0 UTS 10E6 UL 6A 250V UL94 HB CSA 4A 250V UL94 V-0 CSA 6A 250V UL94 HB 14 12 Test conditions 10 8 Contact used: Machined contacts Wires used: 0.518mm² 6 4 2 IEC 7A 32V 1.5kV 3 0 0 20 40 60 80 100 120 Ambient Operating Temperature (°C) Current use 15 Limited use Not recommended use UTS Series 10E7 OR Layout OR OR WITH Specifications Contact type Hand solder electrical contacts loaded Connector type Backshell Square flange receptacle Part number Male insert Female insert Without (Fig.1) UTS010E7P UTS010E7S Without (Fig.2) UTS610E7P UTS610E7S Cable gland (Fig.3) UTS6JC10E7P UTS6JC10E7S Jam nut receptacle Without (Fig.4) UTS710E7P UTS710E7S M16 threaded receptacle Without (Fig.5) Plug UTS710E7PM16 UTS710E7SM16 Sealed unmated 16 UTS Series 10E7 7 contacts 7A/50V per IEC 61984 Dimensions Square flange receptacle - UTS0 Plug - UTS6 24 70 Ø26.2 20.8 Ø15.1 25.3 7.5 2.3 Ø3.2 Fig. 1 Fig. 2 Front view Jam nut receptacle - UTS7 3 Fig. 3 Mated connector length 22.4 18.3 70.9 27.2 Ø15.1 UTS0 UTS7 77.3 3.5 Front view Fig. 4 M16 threaded receptacle - UTS7 24 Ø15.1 21.5 M16x1.5 5 13.9 Fig. 5 Panel cut out Jam nut receptacle UTS7 M16 Chf.45°x2.65 Ø3.1 15° Ø22 15° 18.5 x1 .5 16 Ø4 Ø13.5 3.3 .9 17 M Front mounting Ø15.2 16.7 18.5 1.6 Square flange receptacle - UTS0 Ø3.3 Drilling pattern Ø17.7 Rear mounting Ø17.9 19.6 2.8 Note: All dimensions in mm unless otherwise noted. 17 UTS Series 10E7 Accessories and tooling Jam nut sealing caps Metal terminal Part number Part number UTS10DCG UTS10DCGR Plug sealing cap Square flange sealing cap Metal terminal Part number Part number UTS610DCG UTS10DCGE Plastic protective cap Gasket Part numbers Part numbers / neoprene Receptacle cap Plug cap 85005586A 85005595 UTFD12B Color coding rings Part numbers G for Green Y for Yellow R for Red Receptacles Plugs UTS710CCRR UTS610CCRR UTS710CCRY UTS610CCRY UTS710CCRG UTS610CCRG * Add G for Green, Y for Yellow, R for Red 18 UTS Series 10E7 7 contacts 7A/50V per IEC 61984 Electrical characteristics UTS 10E7 derating curves Current (A) 14 UL 6A 250V UL94 HB 12 Test conditions CSA 6A 250V UL94 HB Contact used: Machined contacts Wires used: 0.518mm² 10 8 6 4 2 IEC 7A 50V 1.5kV 3 0 0 20 40 60 80 100 120 Ambient Operating Temperature (°C) Current use 19 Limited use Not recommended use UTS Series 18X2M3 Layout OR WITH Specifications Contact type Crimp contacts supplied separately see page 23 Part number Connector type Backshell NPT threaded receptacle Without (Fig.1) UTS718X2M3PNPT UTS718X2M3SNPT Plug Without (Fig.2) UTS618X2M3P UTS618X2M3S Plug Cable gland (Fig.3) UTS6JC18X2M3P UTS6JC18X2M3S 20 Male insert Female insert UTS Series 18X2M3 5 contacts 32A/300V per IEC 61984 Dimensions NPT threaded receptacle - UTS7 14.4 31.8 31.8 Ø28.5 Ø19.5 17.2 NPT - 3/4˝ Fig. 1 Plug - UTS6 Ø39.5 Ø39.5 81.3 Ø21.5 37.1 Fig. 2 Fig. 3 Mated connector length - UTS6JC 90.5 Panel cut Drilling pattern NPT 5.1 5.1 5.1 5.1 .4 T 23 N P 4 3/ Note: All dimensions in mm unless otherwise noted. 21 UTS Series 18X2M3 Accessories and tooling Jam nut sealing caps Crimp tooling #16 Metal terminal Part number Part number UTS18DCG UTS18DCGR Part number Part number SHANDLES TOOLKIT Plug sealing cap Contacts Part number of head Contact size RM/RC 28M1K(1) RM/RC 24M9K(1) RM/RC 20M13K(1) RM/RC 20M12K(1) RM/RC 16M23K(1) Standard contacts RM/RC 14M30K(1) #16 SM/SC 24ML1TK6(1) Ø 1.6mm SM/SC 20ML1TK6(1) SM/SC 16ML1TK6(1) SM/SC 14ML1TK6(1) SM/SC 16ML11TK6(1) Part number UTS618DCG Plastic protective cap S16RCM20 S16RCM20 S16RCM20 S16RCM20 S16RCM16 S16RCM14 S16SCM20 S16SCM20 S16SCML1 S16SCML1 S16SCML11 (1): Example of plating, for other plating see page 26 Part numbers Receptacle cap Plug cap 85005590A 85005599 Crimp tooling #8 Color coding rings Y for Yellow Part number hand tool Part numbers G for Green R for Red Receptacles Plugs UTS714CCRR UTS614CCRR UTS714CCRY UTS614CCRY UTS714CCRG UTS614CCRG M317 Part number positioner + locator setting VGE10078A Part number extraction tool 51060210936 * Add G for Green, Y for Yellow, R for Red 22 UTS Series 18X2M3 5 contacts 32A/300V per IEC 61984 Contacts #16 Contact type 30-28 Crimp Machined Female Max wire Ø Max insulator Ø RM28M1K RC28M1K 0.55 1.0 26-24 RM24M9K RC24M9K 0.8 1.6 22-20 RM20M13K RC20M13K 1.15 1.8 22-20 RM20M12K RC20M12K 1.15 2.2 20-16 RM16M23K RC16M23K 1.8 3.2 16-14 RM14M30K RC14M30K 2.3 3.2 26-24 SM24M1TK6(1)(2) SC24M1TK6(1)(2) - 0.90-1.60 22-20 (1)(2) SM20M1TK6 (1)(2) SC20M1TK6 - 1.20-2.10 18-16 SM16M1TK6(1)(2) SC16M1TK6(1)(2) - 3.2 (1)(2) (1)(2) SM16M11TK6 SC16M11TK6 - 3.0 14 SM14M1TK6(1)(2) SC14M1TK6(1)(2) - 3.2 PCB Stamped & formed reeled contacts Part number Male AWG Machined (3) - RM20M12E8K(1) RC20M12E84K(1) - - #8 Contact type AWG Max wire Ø Max insulator Ø Crimp 18-16 Machined Part number Male Female 16 82913601A(1) 82913600A(1) 1.72 14 (1) 82913603A (1) 82913602A 2.22 12 82913605A(1) 82913604A(1) 2.82 10 (1) 82913607A (1) 82913606A 3.50 82913609A(1) 82913608A(1) 4.35 8 6.5 (1): Example of plating, for other plating see page 26 (2): Loose piece contact available if putting L. Example: SM20ML1TK6 Electrical characteristics UTS 18X2M3 derating curves Current (A) 50 45 UL 44A 600V UL94 V-0 40 35 Test conditions CSA 34A 600V UL94 V-0 Contact used: Machined contacts Wires used: 8.37mm² IEC 32A 300V 4kV 3 30 25 20 15 10 5 0 0 20 40 60 80 100 120 Ambient Operating Temperature (°C) Current use 23 Limited use Not recommended use UTS Series Assembly instruction UTS threaded receptacle assembly (mounting suggestion) • Place the wires into the panel hole • UTS standard version: Strip wires and crimp the contacts. Recommended strip length: see below • UTS Hi Seal version: strip wires and solder the contacts. Recommended strip length: 5mm • Tighten the connector to the recommended torque (see table) NPT or M16 1 Jam nut torque (Nm) Tool tightening width (mm) 10 3 22.25 14 5 30.19 18 5 36.5 O-ring 2 O-ring Ø 19.6 Shell size Chf. 45°x2.65 NPT or M16 Wire stripping crimp version Part number Male Machined contact Female Stripping length L (mm) #20 RM24W3- / RM20W3RM18W3- RC24W3- / RC20W3RC18W3- RM28M1- / RM24M9RM20M13- / RM20M12- RC28M1- / RC24M9RC20M13- / RC20M12- 4.8 RM16M23- /RM14M30- RC16M23- /RC14M30- 7.1 4.8 #16 L #8 8291 3601- / 8291 36038291 3605- / 8291 36078291 3609Stamped & formed 8291 3600- / 8291 36028291 3604- / 8291 36068291 3608- 6.5 to 7.5 #16 Without insulation support L With insulation support L SM24M1- / SM24ML1SM20M1- / SM20ML1- SC24M1- / SC24ML1SC20M1- / SC20ML1- 4 SM16M11- / SM16ML11- SC16M11- / SC16ML11- 4.65 SM16M1- / SM16ML1- SC16M1- / SC16ML1- 6.35 SM14M1- / SM14ML1- SC16M11- / SC16ML11- 6.35 24 UTS Series Technical information Tooling Standard contacts Contact size #20 1mm Part number RM/RC 24W3 RM/RC 20W3 RM/RC 18W3 SM 24W3S-(1) SC 24W3S-(1) SM 24WL3S-(2) SC 24WL3S-(2) SM/SC 20W3S-(1) SM/SC 20WL3S-(2) RM/RC 28M1RM/RC 24M9RM/RC 20M13RM/RC 20M12RM/RC 16M23RM/RC 14M30- SM/SC 24M1SM/SC 24ML1SM/SC 20M1SM/SC 20ML1SM/SC 16M1SM/SC 16ML1SM/SC 14M1SM/SC 14ML1SM/SC 16M11SM/SC 16ML11(1) contact reeled (2) loose contact Note: endurance of SHANDLES tool = 5,000 cycles. #16 1.6mm Contact size Part number Head Handles S20RCM RX20D44 S20SCM20 S16RCM20 SHANDLES S16RCM16 S16RCM14 RX2025GE1 S16SCM20 S16SCML1 S16SCML11 Hand tool Tool with separate locator Positioner + locator setting 8291 3601A / 8291 3600A #8 3.6mm 8291 3603A / 8291 3602A 8291 3605A / 8291 3604A Extraction tools M317 VGE10078A 8291 3607A / 8291 3606A 8291 3609A / 8291 3608A 3 3 4 5 6/7 Extraction tools 51060210936 Specific contacts Contact size #16 Ø 1.6mm Longer RM contact Part number Hand tools (SHANDLES) head RM28M1GE1RM24M9GE1RM20M13GE1- S16RCM20 RM16M23 GE1RM14M30 GE1- Tool with separate locator Hand tool Positioner + locator setting S16RCM16 S16RCM14 MH860 MH86186 RC24M9GE7RC20M13GE7RC20M12GE7RC16M23GE7RC14M30GE7- 6/8 4/6 5/6 RC28M1GE7- #16 Ø 1.6mm Shorter RC contact S16RCM20 MH860 S16RCM16 S16RCM14 MH86164G 5/7 6/8 25 Extraction tools RX2025GE1 UTS Series Contacts Contact selector guide Contact preloaded Electrical characteristics: contact resistance #20 Ø1mm #16 Ø1.6mm Available platings (contact preloaded) Machined < 4m Machined < 3m Min 0.4µ gold over 2µ Ni Contact supply separately Electrical characteristics: contact resistance #20 Ø1mm #16 Ø1.6mm Available platings (contact supply separately) Machined < 6m A 2µ Ni + 2µ Ag Stamped & formed < 15m J Gold flash over 2µ Ni Machined < 3m K Min 0.4µ gold over 2µ Ni Stamped & formed < 6m S31 Machined < 5m Machined < 5m #12 Ø2.4mm #8 Ø3.6mm S25 S26 Active part: Gold flash over Ni Crimp area: Nickel Active part: 0.75µ gold min over 2µ Ni Crimp area: 1.3µ tin over Ni Other: Nickel Active part: 0.75µ Au over Ni Crimp area: flash Au over Ni TK6 2-5µ Sn pre-plated S18 Other platings on request (contact supply separately) T T: 2µm Ni mini all over + 3 to 5 µm Sn all over Packaging Conscious of the wide variety of applications, contact packaging has been considered for small series (bulk packaging) and high volume production (reeled contacts): Size contacts #20 & #16 • 25 pieces bulk packing (stamped & formed contacts) • 50 pieces bulk packing (machined contacts) • 1000 pieces bulk packing (machined contacts) • 3000 pieces reeled (stamped & formed contacts) Size contacts #8 • 100 pieces bulk packing (stamped & formed contacts) 26 • 5000 pieces reeled (machined contacts) UTS Series Contacts Crimp contacts Standard version Contact size Type Machined #20 Ø1 mm #16 Ø1.6 mm Part number mm² Male 26-24 0.13-0.20 RM24W3K Female (1) SM24W3- Stamped & Formed 26-24 Machined 22-20 Max wire Ø RC24W3K SM24WL30.32-0.52 RM20W3K (1) SM20W3- 1.58 max K 1.17-2.08 TK6 S25 (female) S26 (male) 2.10 max K SC20W3- Machined 20-18 0.50-0.93 RM18W3K RC18W3K 0.35-0.5 SM20WL3- 0.89-1.58 (1) 22-20 (2) K TK6 S25 (female) S26 (male) SC24WL3-(2) RC20W3K Plating available 1.58 max SC24W3- 0.13-0.25 (2) Max insulator Ø (1) Stamped & Formed SC20WL3-(2) Machined 30-28 0.05-0.08 RM28M1- RC28M1- 0.55 1.1 K, J Machined 26-24 0.13-0.2 RM24M9- RC24M9- 0.8 1.6 K, J Stamped & Formed 26-24 0.13-0.25 SM24M1-(1) SM24ML1-(2) SC24M1-(1) SC24ML1-(2) 0.89-1.28 Insulation grip S31, S18, TK6 Machined 22-20 0.32-0.52 RM20M13- RC20M13- RM20M12- RC20M12- Stamped & Formed 22-20 0.35-0.5 SM20M1-(1) SM20ML1-(2) SC20M1-(1) SC20ML1-(2) 1.17-2.08 Machined 20-16 0.52-1.5 RM16M23- RC16M23SC16M1-(1) SC16ML1-(2) 1.18 1.8 2.2 K, J Insulation grip S31, S18, TK6 1.8 3.2 K, J 3.0 No insulation grip S31, S18, TK6 Stamped & Formed 18-16 0.8-1.5 SM16M1-(1) SM16ML1-(2) Stamped & Formed 18-16 0.8-1.5 SM16M11-(1) SM16ML11-(2) SC16M11-(1) SC16ML11-(2) 2.0-3.0 Insulation grip S31, S18, TK6 Machined 16-14 1.5-2.5 RM14M30- RC14M30- 2.28 3.2 K, J 3.2 No insulation grip S31, S18, TK6 - 6.5 A Stamped & Formed #8 Ø3.6 mm Wire size AWG Machined (1) (1) 14 2.0-2.5 SM14M1SM14ML1-(2) SC14M1SC14ML1-(2) 16 1.5 82913601A 82913600A 14 2.5 82913603A 82913602A 12 4 82913605A 82913604A 10 6.0 82913607A 82913606A 8 10.0 82913609A 82913608A (1) contact reeled (2) loose contact Exemple: RM24W3K - Size #20, Machined, AWG24 wire. 27 Stage - Light Industry Building automation & control Off road - Mining Railway www.souriau-industrial.com contactindustry@souriau.com Connection Technologies 28 Medical WINDUTSNPT01EN © Copyright SOURIAU 2013 - All information in this document presents only general particulars and shall not form part of any contract. All rights reserved to SOURIAU for changes without prior notification or public announcement. Any duplication is prohibited, unless approved in writing. UTS Series