05.06
Domus 55 Series
11:00 >
Parking lot
DMS55-SG-SMD-CRM6
DMS55-SG-LM
DMS55-SG-RM
Domus 55 Series
When the Domus Series debuted, it was a
significant innovation for the market. The
luminaire’s timeless design has proven to
be one of the most adaptable shapes we
offer. Wherever it is installed, Domus creates
harmony. Designed to meet the increasing
demand for higher-wattage applications
from a commercial boulevard to a parking
lot, the Domus 55 becomes an integral part
of the landscape design. Highly effective
SG optics allow the designer to use the
Domus 55 as a tool to meet any lighting
design goals.
> Excellent performance
in the most demanding
environments
> Dark-sky friendly optics
provide full-cutoff lighting
> Integrated ballast up to
400 watts in seperate
ballast compartment
> Toolfree access for ease
of maintenance
DMS55-SG-NM
> For the latest updates go to www.lumec.com
> Luminaires (Luminaires are UL and CSA approved)
10 ‘‘ (254 mm) 10 ‘‘ (254 mm) 6 1/2 ‘‘ (165 mm) T.I. 6 1/2 ‘‘ (165 mm) T.I. 27 1/2 ‘‘ (698 mm)
34 1/4 ‘‘ (870 mm)
28 1/2 ‘‘ (724 mm) L.C.
22 1/2 ‘‘ (572 mm) L.C.
28 1/2 ‘‘ (724 mm) L.C.
31 1/2 ‘‘ (800 mm)
9 1/4 ‘‘ (235 mm) 27 1/2 ‘‘ (698 mm)
27 1/2 ‘‘ (698 mm)
DMS55-SG
DMS55-SG-SMB
DMS55-SG-SMB-PH8
EPA: 1.63 sq. ft.
Weight: 49 lbs (22.2 kg)
EPA: 2.11 sq. ft.
Weight: 54 lbs (24.5 kg)
EPA: 2.16 sq. ft.
Weight: 55 lbs (24.9 kg)
> HID Lamps (High Intensity Discharge)
Wattage
SG1 / SG2 / SG3 / SGQ
SGFM
250 MH, mogul
3
3
320 MH, mogul
RJ
N/A
400 MH, mogul
RJ
N/A
250 HPS, mogul
3
N/A
400 HPS, mogul
3
N/A
250 PSMH, mogul
3
3
320 PSMH, mogul
RJ
N/A
400 PSMH, mogul
3: Available
RJ
N/A : Not available
N/A
RJ : Reduced jackect required
> Voltages
> Optical systems (Lamps not included)
120 / 208 / 240 / 277 / 347 / 480 SG Optics
Segmented cut-off reflector system set in faceted
arc-image duplicating patterns
> multi-tap ballast also available
SGQ:
Symmetrical
SG1:
Symmetrical
SG2:
Asymmetrical
SG3:
Asymmetrical
SGFM:
Forward throw
> House shield available for SG2 and SG3
* Photometry available on Lumec web site www.lumec.com
> Adaptors
MA1
The luminaire is suspended by
The luminaire is suspended by
means of a mounting adaptor
means of a decorative side-mounting
with a 1 1/4’’ (32mm) npt threaded
cast-aluminium adaptor. This adaptor
hole accepting a threaded
accepts tubes from 1 5/8’’ to
1 5/8’’ to 2 3/8’’ (41 to 60 mm) and is
2 3/8’’ (41 to 60 mm) and is
adjustable to more or less 50.
tube from the mounting.
(retrofit adaptor for existing mounting)
SMB
The luminaire is fixed by means of
a side-mounting cast-aluminium adaptor.
SMD
This adaptor accepts tubes from
adjustable to more or less 50.
> Maintenance
Access to lamp
The luminaire’s hood can be opened by simply
pulling the latch located on the lens frame. The lens
frame can then be pivoted along a hinge. A built-in
stopper holds the cover vertically and ensure safe
and easy lamp replacement.
11 1/2 ‘‘ (292 mm) 16 1/4 ‘‘ (413 mm) L.C.
16 1/4 ‘‘ (413 mm) L.C.
2 ‘‘ (51 mm)
17 1/4 ‘‘ (483 mm) L.C.
27 1/2 ‘‘ (698 mm)
6 1/2 ‘‘ (165 mm) T.I. 25 ‘‘ (635 mm)
6 1/2 ‘‘ (165 mm) T.I. 22 1/2 ‘‘ (572 mm)
6 1/2 ‘‘ (165 mm) T.I. 11 1/2 ‘‘ (292 mm) 25 1/4 ‘‘ (641 mm)
11 1/2 ‘‘ (292 mm) 27 1/2 ‘‘ (698 mm)
27 1/2 ‘‘ (698 mm)
DMS55-SG-SLG-SMD
DMS55-SG-SMD-PH8
DMS55-SG-SMD-PH8-CP55
EPA: 1.91 sq. ft.
Weight: 50 lbs (22.7 kg)
EPA: 1.68 sq. ft.
Weight: 51 lbs (23.1 kg)
EPA: 1.68 sq. ft.
Weight: 52 lbs (23.6 kg)
> Luminaire options
HS
House shield
SLG
Tempered glass sag lens
> Poles and Pole options
(Consult the Pole Guide for details and the complete line of poles)
12
3.66
PH8
Photoelectric cell (available with SMB and SMD)
CP55
Decorative cover for photoelectric cell
10
3.05
8
2.44
> Mountings
6
1.83
(Consult the Pole Guide for details and the complete line of mountings)
F
4
1.22
2
0.61
IF
LM
NM
RM
CRM
RYM
RTA906/907
RS805
> Configurations
SSM8
RTA927
ft
m
> Finishes
The specially formulated Lumital powder coat finish
is available in a range of many standard colors.
1A
2
2A
3
3B
4
(Consult Lumec’s Color Chart for complete specifications)
M
> Ordering sample
Luminaire
Lamp
Optical System
Voltage
Adaptor Options
Mounting & configuration
DMS55
400 MH
SG3
120
SMD
PH8
LM-1A
Pole
Finish
SSM8-24 GNTX
Access to ballast
The toolfree slide in unitized ballast tray is easily
accessible by simply pulling the latch located on the
shutter door of the ballast housing. Quick-disconnect
terminals ensure safe and easy ballast replacement.
Lumec reserve the right to substitute materials or change the manufacturing process of its products without prior notification.
Registered Lumec inc.
26
7.92
24
7.32
22
6.71
20
6.10
18
5.49
16
4.88
14
4.27
12
3.66
10
3.05
8
2.44
6
1.83
4
1.22
2
0.61
ft
m
Luminaire: DMS55-SG-SMB
Mounting: RYM6-1A
Pole: SSM8-24
www.lumec.com
Lumec Head Office
640, Curé-Boivin Boulevard
Boisbriand, Québec
J7G 2A7 Canada
Tel. : (450) 430.7040
Fax : (450) 430.1453
A Genly te Company
Luminaire: DMS55-SG
Mounting: NM-1A
Pole: RS61-18
Luminaire: DMS55-SG
Mounting: LM-1A
Pole: RTA907-20-BA
Luminaire: DMS55-SG-SMD & DOS-SG
Mounting: CRM6
Pole: RTA928-22-BA