Electrical Safety
Guide
Your Total Solution Provider
Electrical current stops the beating heart of more than
140 construction workers each year. More than half
of the electrocutions were caused by direct or indirect
contact with live equipment and wiring, and a third
of the deaths were due to contact with overhead
power lines, according to the Electronic Library
of Construction Occupational Safety and Health.
Electricians run the highest risk for electrocution out
of all the construction trades, and about 350 electricalrelated deaths occur each year. Many of these deaths,
however, could have been avoided through proper
lockout/tagout procedures, working in a de-energized
condition, and following proper safety procedures.
To make sure you and your coworkers go home safely
at the end of each work day, you need the right tools
to get the job done. WESCO is here to help. With more
than 475 full-service Branches in North America and
overseas, we have the products and technology to keep
you safe out in the field. We maintain relationships
with more than 29,000 suppliers and have their
products in stock when you need them.
2
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
for
Electrical
Safety
As part of Electrical Safety , WESCO is offering the following tips,
case studies, definitions, and examples to help our valued customers
mitigate the top electrical hazards in the field.
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
3
Featured Safety Suppliers...
WESCO has partnerships with quality suppliers nationwide. WESCO
is dedicated to supplying our customers with superior products
quickly and efficiently through our extensive distribution
and logistics network. When it comes to safe, reliable,
cutting-edge products…WESCO delivers.
®
Looking for Sustainable
Safety and MRO Solutions?
Turn over a New Leaf!
WESCO has hundreds of sustainable safety products that can help you
reduce your environmental impact. Visit WESCO.com and “look for
the leaf” to search our sustainable products database.
Coming Summer 2013: The WESCO 2013–2014
Sustainability Catalog!
4
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
Electrical Glove Testing
WESCO now has a competitive electrical equipment
testing service through Conney Safety Products!
Per OSHA 29 CFR 1910.137 Electrical Protective Devices, electrically
insulated gloves must be tested every 6 months once issued for service
or if tested but have not been put into service in the previous 12
months (Table I-6 - Rubber Insulating Equipment Test Intervals).
This means that the majority of the insulating gloves you are selling
from Salisbury must be retested at 6-month intervals for the life of the
gloves! The good news? Once customers use the Conney Safety Program,
they rarely use a different provider and the orders are nearly automatic!
WESCO glove testing service includes the following:
s Visual Inspection — Gloves will be stretched and folded
to find unacceptable surface irregularities
s Air Test — Gloves will be filled with air to identify holes
s Electrical Test — Gloves will be subjected
to appropriate level of electricity, depending on glove classification
s Cleaning/Dusting — Gloves will be cleaned
and glove dust applied
s Performance Report — A detailed performance report
will accompany your glove shipment
Other testing services include hot sticks, blankets, sleeves, mats,
and line hoses. Contact safety@conney.com or go online to
www.conney.com/electricaltesting for more information.
Did you know?
Leather protectors should be replaced
when they are soiled with dirt, grease,
oils, and/or have embedded objects,
cuts, tears, or other blemishes that may
compromise the safety of the gloves.
Safety and Security
WESCO offers a comprehensive portfolio of Safety and Security
solutions which help our customers prevent accidents, meet
OSHA requirements, bring visibility to safety procedures, and limit
safety-related risks within a facility. From Arc Flash Training
and Lockout/Tagout to Wiring Device Maintenance and PPE
Assessments, our internal supplier experts can work together
to help you meet all of your electrical safety needs.
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
5
Electrical Safety Solutions
Protect your hearing from arc flash’s impulse noise.
V 3M™ E-A-R™ ARC Plug™ Earplugs
3M™ E-A-R™ ARC Plug™ earplugs feature Hear-Through™ design, which enables
workers to hear conversations, signals, or other critical sounds clearly, while
helping to protect against impulse noise from an arc flash.
s Double-end versatility
s Yellow end’s Hear-Through™ design features a built-in calibrated
noise filter that activates immediately during an arc flash to suppress
noise to a safer level
s Red end provides protection against continuous hazardous noise
s Tri-flange, push-to-fit design is washable and reusable
s Material successfully tested for arc exposures
of Category 2 and higher, ASTM F1959-2005 modified
s Noise Reduction Rating (NRR): 22 dB, CSA Class AL
WESCO Part No. Mfr.’s Model No. Description
080529-70012 370-2000
3M™ E-A-R™ ARC Plug™ Earplugs, 10 Pairs per Case
Permanently adhere to a wide variety of surfaces.
V Brady® Arc Flash Labels
s Meet current NEC® labeling requirements
s Industrial-grade adhesive sticks permanently
to a wide variety of surfaces
s Made of durable B-302 Polyester with
overlaminate to withstand harsh environments
WESCO Part No.
754473-00897
754473-00898
CALL
754473-00900
Mfr.’s Model No.
101519
101520
101950
101951
Description
WARNING
DANGER
WARNING
DANGER
Size
2" x 4"
2" x 4"
3.5" x 5"
3.5" x 5"
Contain the basic devices needed to lockout common
breakers, valves, and plugs.
V Brady® Personal Basic Lockout Kits
Components:
s (1) 1⁄2"–21⁄2" small ball valve lockout
s (1) 1"–21⁄2" gate valve lockout
s (1) 120/277V clamp-on breaker lockout
s (1) universal multi-pole breaker lockout
s (1) small 100V plug lockout
s (2) 1" lockout hasps
s (2) heavy-duty lockout tags
s (1) small lockout toolbox
WESCO Part No.
754473-00887
754473-00870
754473-00886
6
Mfr.’s Model No.
104794
104795
104796
Description
Kit without Locks
Kit with 2 Keyed-Alike Safety Padlocks
Kit with 2 Keyed-Alike Steel Padlocks
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
Pkg. Qty.
10
10
5
5
Electrical Safety Solutions
Ergonomic design makes it a “cinch” to tighten cable.
V Brady® All-Purpose Cable Lockouts
s Can be used in a wide variety of applications
s Compact, lightweight body made of rugged isoplast
s Superior chemical-, corrosion-, and temperatureresistance properties
s Four lock holes in handle accommodate most
lock shackles and hasps
WESCO Part No. Mfr.’s Model No. Description
754473-50943 50943
APCLO with 8' Sheathed Cable
754473-50941 50941
APCLO with 8' Nylon Cable
Adjusts to fit 1–61⁄2" valve handles.
V Brady® Adjustable Gate Valve Lockout
s Polypropylene construction
s Resistant to temperature changes (-13–194˚ F)
s Includes danger labels in English,
Spanish, and French
WESCO Part No. Mfr.’s Model No. Color
754473-64057 64057
Red
13 lock holes on lid, plus lockable clasp on front.
V Brady® Portable Metal Lock Box
s Made of heavy-duty steel, powder coated for extra rust resistance
s Extended lid and inner lip make the keys inaccessible,
even when only one lock remains
s Slot in front enables keys to be inserted in locked box
s NOTE: Locks not included
s 6"H x 9"W x 3.5"D
WESCO Part No. Mfr.’s Model No. Description
754473-65699 65699
Standard Size — Holds up to 40 Padlocks
When Used as Storage
Everything you need to lockout breakers, plugs, and valves
of various types and sizes.
V Brady® Personal Valve & Electrical
Lockout Kits
Components:
s (1) all-purpose cable lockout
s (1) 1"–61⁄2" adjustable gate valve lockout
s (1) 1⁄2"–21⁄2" small ball valve lockout
s (2) 120/277V clamp-on breaker lockout with cleats
s (1) 480/600V clamp-on breaker lockout with cleats
s (2) universal multi-pole breaker lockouts
s (1) 3-in-1 plug lockout
s (3) 1" group lockout hasps
s (3) heavy-duty lockout tags
s (1) medium lockout toolbox
WESCO Part No.
754473-00887
754473-00870
754473-00886
Mfr.’s Model No.
105954
105955
105956
Description
Kit without Locks
Kit with 3 Keyed-Alike Safety Padlocks
Kit with 3 Keyed-Alike Steel Padlocks
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
7
Electrical Safety Solutions
Constructed of 88% cotton and 12% flame-resistant
nylon fabric.
V Direct Safety® Indura® Ultra Soft®
Flame-Resistant Coveralls
s
s
s
s
Comply with NFPA 70E Hazard Risk Category 2
Arc rating of 12 cal./cm2
Provide a soft feel and an extended wear life
Feature a snap front closure, side pass-through openings,
and an elasticized waistband
s Two chest pockets, two hip pockets, and two rear pockets provide
plenty of space for tools and equipment
WESCO Part No.
400090-98927
400090-98926
400090-98925
400090-98924
400090-98923
Mfr.’s Model No.
11713
11714
11715
11716
11717
Description
Medium, 32"L Inseam, 32–34" Waist, Blue
Large, 32"L Inseam, 36–38" Waist, Blue
X-Large, 32"L Inseam, 40–42" Waist, Blue
XX-Large, 32"L Inseam, 44–46" Waist, Blue
3X-Large, 32"L Inseam, 48–50" Waist, Blue
Offer protection for the head and neck.
V NSA Balaclava Hoods
s Flame resistant and comply with NFPA 70E Hazard Risk Category 2
s Indura® Ultra Soft® hood is lightweight, comfortable, and has
an arc rating of 12 cal./cm2
s CarbonX® hood provides durable protection and has an arc rating
of 23 cal./cm2
WESCO Part No. Mfr.’s Model No. Description
400979-92021 H11RY
NSA Indura® Ultra Soft® Balaclava Hood
400979-92046 H18CX
NSA CarbonX® Balaclava Hood
Include rubber insulating gloves, a pair of goatskin
leather protector gloves, and a glove storage bag.
V Novax® Electrical Glove Kits
s Rubber insulating gloves offer excellent dielectric properties combined
with flexibility, strength, and durability
s Goatskin leather protector gloves should always be worn over rubber
insulating gloves to protect against cuts, abrasions, and punctures
s Glove storage bag allows for flat storage of gloves to prolong glove life
WESCO Part No. Mfr.’s Model No. Description
616314-05251 147SK07
Orange, Class 0, 11"L, Size 7
616314-06528 150SK07
Black, Class 0, 11"L, Size 7
8
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
Electrical Safety Solutions
3X the protection in 1⁄3 the space of equivalent
circuit breakers.
V Cooper Bussmann® Compact Circuit Protector (CCP)
s 200kA short-circuit current rating (SCCR) with Class CC fuses provides
high assembly SCCR and reduced personal protective equipment (PPE)
requirements
s At 1⁄3 the space required by a molded case circuit breaker and 2⁄3 the space
required by a traditional fusible switch, the CCP saves space
in your panel
s UL98 disconnect rated for protection of branch circuits with Class CC fuses
s Open-fuse indication can be provided both locally and remotely for fast
troubleshooting and reduced downtime
s Full voltage rating at 600 VAC with Class CC fuses enables installation
flexibility versus slash-rated devices at 480/277 VAC
s Finger-safe to IP20 under specific conditions
s Lockout/tagout capability promotes safe
workplace practices
WESCO Part No.
CALL
CALL
CALL
CALL
CALL
CALL
CALL
CALL
CALL
CALL
Mfr.’s Model No.
CCP-1-30CC
CCP-2-30CC
CCP-3-30CC
CCP-1-30M
CCP-2-30M
CCP-3-30M
CCP-1-DCC
CCP-1-DCM
CCP-PLC-IND
CCP-AUX
Description
Compact Circuit Protector, 1 Pole, Class CC 30A 600 VAC
Compact Circuit Protector, 2 Pole, Class CC 30A 600 VAC
Compact Circuit Protector, 3 Pole, Class CC 30A 600 VAC
Compact Circuit Protector, 1 Pole, 10x38 mm/Midget, 30A/32A 250 VAC/600 VAC
Compact Circuit Protector, 2 Pole, 10x38 mm/Midget, 30A/32A 250 VAC/600 VAC
Compact Circuit Protector, 3 Pole, 10x38 mm/Midget, 30A/32A 250 VAC/600 VAC
Compact Circuit Protector,1 Pole, Class CC, 80 VDC
Compact Circuit Protector, 1 Pole, 10x38 mm/Midget, 80 VDC
Compact Circuit Protector 3-Phase PLC Remote Fuse Indication
Compact Circuit Protector, NO/NC Auxiliary Contacts
The safer safety switch.
V Cooper Bussmann Quik-Spec™ Safety Switch
s Enhanced Finger-Safe Design: The IP20 finger-safe Cooper Bussmann®
CUBEFuse® is the latest in fuse technology, and a large line-side shield is
standard on all models to virtually eliminate accidental contact with
live parts
s Current-Limiting Fuses Reduce Arc-Flash Hazard: With Class J
performance, you get the best arc flash protection versus traditional
models
s The 200kA Short-Circuit Current Rating: Makes it easier to comply
with NEC® 110.9 and 110.10 requirements, and is listed to UL® 98
and UL® 50 standards
s Flange Operated Handle: Is always in contact with the switch mechanism
and has lock-out/tag-out provisions
s Easy Interface with Viewing Window Option: Window provides visual
verification that switch contacts have operated, plus the ability to view
fuse indication without opening the switch door
s Tooless Removal of Fuse: Reduce downtime and potential
arc flash hazard
s Flexibility of Application: The 600V heavyduty switch is available up to 100A with
NEMA 1, 3R, 12, and 4X enclosure styles
WESCO Part No.
051712-18281
051712-18273
051712-18276
051712-18284
051712-18282
051712-18274
051712-18277
051712-18285
051712-18283
051712-18275
051712-18279
051712-18286
Mfr.’s Model No.
CF361FDK
CF361FGK
CF361FRK
CF361FWK
CF362FDK
CF362FGK
CF362FRK
CF362FWK
CF363FDK
CF363FGK
CF363FRK
CF363FWK
Description
600V 30A Switch, Type 12
600V 30A Switch, Type 1
600V 30A Switch, Type 3R
600V 30A Switch, Type 4X
600V 60A Switch, Type 12
600V 60A Switch, Type 1
600V 60A Switch, Type 3R
600V 60A Switch, Type 4X
600V 100A Switch, Type 12
600V 100A Switch, Type 1
600V 100A Switch, Type 3R
600V 100A Switch, Type 4X
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
9
Electrical Safety Solutions
Cooper Bussmann® workplace safety.
V Cooper Bussmann Services
Arc Flash Studies: OSHA recognizes NFPA 70E to help mitigate the effects
of arc flash on worker safety. Cooper Bussmann is an expert at implementing
this standard in your facility. We will work from a short circuit and coordination
analysis to determine critical data for your approach and flash protection
boundaries, as required by NFPA 70E. From this, we will identify the hazard risk
category and define the personal protective equipment (PPE) levels
for safely performing work on electrical panels.
Training: As technology and codes evolve and new personnel join your
operation, Cooper Bussmann Training Services can provide the knowledge to
maximize your productivity and protection. Whether on-site training seminars or
technical publications, Cooper Bussmann Services can provide the right training
when and where you need it — while you stay focused on your business.
Technical Materials: Cooper Bussmann Services has developed advanced,
value-added technical resources to meet the demanding needs of code
compliance and electrical design and safety.
From our award-winning Safety BASICs™ program
to DVD library, it’s easy to stay abreast of evolving
technology and changing standards.
The 3 R’s of the Low-Peak® Fuse Reduction Plan.
V Cooper Bussmann Low-Peak Upgrade
1. Reduce Downtime: Cooper Bussmann Low-Peak time-delay current-limiting
fuses offer superior protection against short-circuit faults that can destroy motors
and motor starters, and save long downtime and replacing costly equipment.
2. Reduce Inventory: Low-Peak fuses can reduce inventory by replacing multiple
SKUs; save investment and maintenance expenses on that inventory.
3. Reduce Arc Flash Hazard: The current-limiting feature of all Cooper
Bussmann Low-Peak fuses assures minimum incident energy should an arc
flash occur, thereby not only reducing the arc flash
hazard, but also potentially reducing the level
of PPE. The Cooper Bussmann Class J, LPJ Series
of fuses provide the best current limitation.
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
UL® Listed, IP20 enclosed power distribution blocks
offer high SCCR.
V Cooper Bussmann® Finger-Safe Series
Power Distribution Blocks with High SCCR
s Enclosed, safer installation; IP20 finger-safe under specific conditions
s High short-circuit current ratings (SCCR), up to 200kA; these PDBs do not
have to be the weak link in the achieving high assembly SCCR
s Listed to UL® 1953, required for feeders in UL® 508A Industrial Control Panels
s Easy panel mounting: gangable for flexible multi-pole installations
s Meet NEC® 376.56(B)(4) for wireway installations
s Small footprint saves panel space
s DIN rail mount or panel mount
WESCO Part No.
051712-65980
051712-65982
051712-65984
051712-65986
051712-65990
051712-65988
051712-65992
10
Mfr.’s Model No.
PDBFS204
PDBFS220
PDBFS303
PDBFS330
PDBFS377
PDBFS500
PDBFS504
Amps
175A
175A
310A
380A
570A
620A
760A
Line
Load
Wire Range
Openings per Pole
Wire Range
Openings per Pole
2/0–8 AWG, 70–10mm2
1
2/0–8 AWG, 70–10mm2
1
1
4–14 AWG, 25–2.5mm2
4
2/0–8 AWG, 70–10mm2
1
350 kcmil–6 AWG, 150–16mm2
1
350 kcmil–6 AWG, 150–16mm2
1
2–14 AWG, 35–2.5mm2
6
500 kcmil–6 AWG, 240–16mm2
2
4–14 AWG, 25–2.5mm2
12
300 kcmil–4 AWG, 150–12mm2
2
350 kcmil–4 AWG, 185–12mm2
2
350 kcmil–4 AWG, 185–12mm2
2
500 kcmil–6 AWG, 240–16mm2
2
500 kcmil–6 AWG, 240–16mm2
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
Electrical Safety Solutions
Long-life LED technology helps reduce maintenance costs.
V Cooper Crouse-Hinds® LED Safety Shower Lights
s
s
s
s
Long-life LED technology reduces maintenance requirements
Suitable for wet locations, Class I, Div 2 hazardous areas
Available in all standard colors; single or double fixtures
Meet OSHA safety light requirements
WESCO Part No. Mfr.’s Model No. Description
CALL
VX2LSG/120
Green LED Safety Shower Light 120V
CALL
VX2LSG/240
Green LED Safety Shower Light 240V
Install an explosion-proof seal in less than five minutes.
V Cooper Crouse-Hinds Chico® SpeedSeal™ Compound
s
s
s
s
s
Eliminate the chance of an incorrectly poured sealing fitting
Provides a safe, reliable seal in hazardous areas
Makes a correctly poured seal every time
Suitable for Class I, Div 1 & 2 hazardous areas
Installs a reliable seal in five minutes;
hardens in 20 minutes
WESCO Part No. Mfr.’s Model No. Description
CALL
CHICO-SS2
2 oz. Pre-Measured Package
CALL
CHICO-SS6
6 oz. Pre-Measured Package
GFCI protection for adverse/hazardous locations.
V Cooper Crouse-Hinds® GFCIs
WLGF
s For use in wet locations
s Mounting cover for use with GFCI duplex receptacles
s Mounts in standard FS/FD or flush mount boxes
GFS1
s
s
s
s
GFCI protection in Class I, Div 1 & 2 hazardous areas
Decentralized GFCI protection for branch circuits
Can be used upstream to serve multiple receptacles
Factory sealed
WESCO Part No.
CALL
CALL
CALL
CALL
Mfr.’s Model No.
WLGF
WLGF-FS
WLGF-FSV
GFC1
Description
For Flush Devices Boxes
For Use with FS/FD Boxes in Horizontal Position
For Use with FS/FD Boxes in Vertical Position
For Use with EDC/EDSC Back Boxes
Fire alarm stations for adverse environments.
V Cooper Crouse-Hinds Fire Alarm Stations
N2FA Non-Metallic
s Excellent for wet, corrosive applications
s Suitable for Class I, Div 2 hazardous locations
s Familiar break glass alarm station
EFS Explosion-Proof
s
s
s
s
Suitable for Class I, Div 1 & 2 hazardous locations
Familiar break-glass alarm station
Factory sealed
Ideal for use in raintight, wet locations
WESCO Part No.
CALL
CALL
CALL
CALL
Mfr.’s Model No.
N2FA21
N2FAC21
EFS21095
EFSC21095
Description
3
⁄4 Dead End Enclosure
3
⁄4 Through-Feed Enclosure
3
⁄4 Dead End Enclosure
3
⁄4 Through-Feed Enclosure
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
11
Electrical Safety Solutions
Faster interruption times than the standard (digital)
“instantaneous” protection.
V Eaton Arcflash Reduction Maintenance System™
The Arcflash Reduction Maintenance System™ unit utilizes a separate analog
trip circuit that provides faster interruption times than the standard (digital)
“instantaneous” protection.
s Increased worker safety
s Pre-select from five levels of protection to facilitate the maximum arc
flash reduction while avoiding nuisance tripping during start-up and
maintenance operations
s Enabled by a simple lockable switch that can be incorporated into
a Lock Out Tag Out (LOTO) procedure
s Lockable switch mounted on the front door, up to 3 meters away
from the breaker, eliminating the need to open the door to enable it
s Reduction in incident energy levels may enable reduced levels of PPE
s Designed to be used only during the time that a worker is exposed
to the flash hazard
s When properly applied, hazard risk category can be lowered one
or two categories permitting less PPE
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Drastically reduces the probability of an arc flash.
V Eaton FlashGard™ Motor Control Center
Eaton’s new FlashGard™ motor control centers are built on “arc free” designs
intended to drastically lower the probability of the creation of an arc flash. Some
of the features of this new motor control center include: Fast-acting circuit
breakers, 24-volt DC control power, finger-safe components, and external
voltage test points.
s The minimization of impact and exposure to higher PPE levels
in industrial environments:
– Increases uptime of product line operations
– Decreases direct cost of employee incidences
– Increases personnel safety
– Reduces number of injury-related incidences that occur daily
in North America
s Lowers the probability of the creation of a short circuit phase-tophase or phase-to-ground
s Lowers the probability of electrical shock
s Proven to reduce incident arc flash energy during maintenance*
Plant Engineering magazine recognized Eaton’s FlashGard
Motor Control Center as a finalist in their annual Product
of the Year competition for 2007.
* As described by the IEEE testing method described in IEEE 1584.
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
12
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
Electrical Safety Solutions
The use of of emergency stops has been on the increase in the past few years due to new safety regulations. Even
many automation and touch screen users are required to use a hard-wired E-stop by code. Eaton offers a wide array
of emergency stops in 22mm and 30mm. In addition, Eaton offers self-monitoring contact blocks that ensure they are
properly installed on the operator.
The right solutions for emergency stop
switch requirements.
V Eaton Emergency Stop Switches
s
s
s
s
s
25mm, 40mm, or 65mm diameter mushroom head operators
Mechanically latched operators
22.5mm or 30.5mm diameter hole mounting
UL® ratings
Accessories that meet OSHA and EN418 requirements
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Emergency stop integrity.
V Eaton Self-Monitoring Circuit Contact Block
for 22mm E-Stops
s Ensure that the operator is always operational and ready to be
engaged in an emergency
s Additional circuit monitors its physical attachment to the
emergency stop operator
s Detects a fault if the contact block becomes loose
or separated from the operator
WESCO Part No.
CALL
Mfr.’s Model No.
E22CB1M
Keep a safe distance.
V Remote Power Racking
Unit (RPR-2)
Eaton’s RPR-2 provides a means of remotely
racking power circuit breakers that utilize the
rotation of a shaft for insertion and removal.
The person can be 25 feet or more away from
the switchgear door during the racking process.
This allows personnel to wear a lower level
of PPE (increased worker comfort and mobility)
while operating the RPR-2 from an increased
distance from the breaker. Since personnel
can be outside the flash protection boundary
while operating the RPR-2, the circuit breaker
door does not have to be closed during the
racking process.
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
13
Electrical Safety Solutions
Signaling systems for emergency warning,
start and dismissal, general alarm, evacuation,
and paging applications.
V Federal Signal Audible Alarms
From warning lights to sirens and strobes, no one puts their name on a more
industrial audible and visual signaling devices and communication systems.
For a total understanding of what it takes to make your workplace work smarter
and safer, turn to Federal
Signal for a Total Solution.
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Federal Signal’s LED visual signals designed
for the harshest industrial environments.
V Federal Signal 27XL
s
s
s
s
s
s
s
s
s
s
Available in 24 VDC, 120 VAC, and 240 VAC
Available in flashing or steady-burn mode
Six lens colors
60,000-hour LED
Dome guard optional
3
⁄4" pendant mount standard, other options available
Reduce maintenance costs
UL® and cUL Listed, Class 1, Division 1 applications
Type 4X, IP66 enclosure
Marine Listed
V Federal Signal 225XL
s
s
s
s
s
s
s
s
Available in 24 VAC/DC, 120 VAC, and 240 VAC
Five lens/lamp colors
60,000-hour, vibration-resistant LED lamp
1
⁄2" pipe mount
Reduce maintenance costs
UL® and cUL Listed, Class 1, Division 2 applications
Type 4X, IP66 enclosure
Marine Listed
V Federal Signal 191XL
s
s
s
s
s
s
s
s
s
Available in 24 VAC/VDC or 120 VAC
Five lens/lamp colors
Flashing mode standard, configurable to steady-burn
Available in 3⁄4" NPT pipe mount or surface mount
Dome guard included
Reduce maintenance costs
UL® and cUL Listed, Class 1, Division 2 applications
Type 4X, IP66 enclosure
Marine Listed
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
14
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
Electrical Safety Solutions
Safety first!
V IDEAL® Industrial Clamps with TightSight™
The complete line of industrial clamps from IDEAL was designed to set a new
standard for safety technology. It starts with the revolutionary TightSight™
display. This enables an electrician to keep his head and face out of potentially
dangerous panels while viewing the measurement. The CAT III ratings, rugged
construction, and UL® listing should give every electrician the confidence to go
about the job without worrying about equipment safety.
s Hi-Voltage safety feature alerts user to dangerous voltage levels sensed through
the test leads even if the meter is accidentally set on the wrong function
s TightSight™ bottom display enables viewing an arm’s length
away from the energized conductors/bus bar in a panel
s CAT III — 1000V safety rating
®
WESCO Part No.
783250-72401
783250-65947
783250-66420
783250-66426
Mfr.’s Model No.
61-763
61-756
61-773
61-775
Description
660A AC with TRMS, Capacitance, Frequency
660A AC/DC with TRMS, Capacitance, Frequency
1000A AC with TRMS, Capacitance, Frequency
1000A AC/DC with TRMS, Capacitance, Frequency
The only 1,000V pliers with UL® classification.
V IDEAL® Insulated Tools
s
s
s
s
s
s
Double-insulated tools are 1,000-volt certified
Special santaprene grips provide exceptional safety, comfort, and control
Comply with OSHA 1910.335 regulations and NFPA 70E standards
Meet ASTM F1505-01 and IEC 60 900 standards
UL® and VDE listed and certified
Lifetime guarantee
WESCO Part No.
783250-73253
Mfr.’s Model No.
35-9101
®
Description
17-Piece Standard Kit
Provides continuous protection for your
connected equipment.
V Pass & Seymour® Self-Test GFCI Receptacle
The new Pass & Seymour Self-Test GFCI Receptacle conducts an automatic
performance test every second, ensuring that it’s always ready to protect. If the
device does fail, power is automatically locked out, and a flashing indicator light
will alert the end user that it must be replaced.
All P&S Self-Test GFCIs include these features:
s Self-Test GFCI with SafeLock™ Protection — Performs an automatic test
every second and locks out power if protection is no longer available;
prevents the unsafe condition of power without protection
s Tamper-resistant — Automatic shutter system prevents young children
from inserting common objects, such as hairpins or keys
s The most durable GFCI receptacle available — Exceeds UL® 943 voltage
surge requirements; survives 100X the required UL® 3kA/6kV voltage surge
test cycles
s 15A, 20A, and hospital-grade models available
s Ground terminal back-wire clamp for fast installation.
s Auto-ground clip ensures a positive ground to metal box
s Side or internal screw-pressure plate back-wire termination speeds
installation; takes 14–10 AWG stranded or solid copper or copper-clad
conductors
s Two back-wire holes per termination add wiring flexibility, eliminate
pigtailing, and save box space
s Indicator light makes it easy to identify status
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
15
Electrical Safety Solutions
Highest quality GFCIs for over 40 years.
V Pass & Seymour® GFCI Receptacles
From the world’s first GFCI receptacle in 1971, to the introduction of groundbreaking SafeLock™ Protection some 30 years later, Legrand® has been
delivering Pass & Seymour® GFCI innovations designed to enhance safety,
shorten installation times, and increase productivity for four decades.
Because of their proven effectiveness, GFCIs are required by code in numerous
locations. We’ve made it our mission to offer intelligently designed solutions for
every residential and commercial environment.
Whatever the job calls for, there’s a reliable Pass & Seymour® GFCI innovation
for you.
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Prevent lost-time injuries.
V Pass & Seymour® Ground Continuity Monitoring
Plugs & Connectors
Give safety the green light — and hazardous conditions the red light. Pass &
Seymour® Straight Blade and Turnlok® Ground Continuity Monitoring (GCM) plugs
and connectors indicate power status, monitor ground continuity, and warn of
other hazardous conditions such as a miswire, open hot or neutral conductor,
or hot/ground reversal. Multiple, dual-color LEDs speed troubleshooting, so you
know in an instant if there’s a problem — no need to wait for a scheduled test.
That means significantly reduced risk of job-site injury. And the longer you use
them, the greater the chances they’ll prevent a lost-time injury.
Moreover, Pass & Seymour® GCM Plugs & Connectors save time and labor
whenever you install them, thanks for a full range of quick-install features like
keyed housings and backed-out terminal screws. Put P&S Ground Continuity
Monitoring Plugs & Connectors to work for you — and get enhanced safety
and productivity.
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Shut out water and dirt from your electrical system.
V Pass & Seymour® Pin & Sleeve Devices
There’s no better protection against moisture and industrial contaminants than
P&S IEC Pin & Sleeve products. With spring-loaded covers, locking rings, and
neoprene gaskets, everything from water to dirt is completely shut out of the
electrical system — even if the connection is accidentally submerged.
All P&S Watertight Pin & Sleeve plugs, connectors, receptacles, and inlets bring
you the features to enhance versatility, reliability, and safety. For example, North
American products come completely ready to wire, for quick, simple installation.
And all feature impact- and chemical-resistant thermoplastic construction.
Shrouded, nickel-plated, solid-brass pins provide corrosion protection and
excellent conductivity. And an exclusive, hinged cord grip eliminates loose parts
that get lost.
With a complete range of choices rated from 20 to 100 amps, you’ll find a
Legrand® works-for-you solution for every Pass & Seymour® Pin & Sleeve device
application in and around your plant.
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
16
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
Electrical Safety Solutions
New, easy-install SmartlockPro® Slim GFCIs —
the smart choices for installation.
V Leviton® SmartlockPro® Slim GFCI Receptacles
s Reduced depth of SmartlockPro® Slim GFCI makes it easier to install
in any electrical box, even shallow ones
s Terminals allow for easy wiring options — back and side wire capable
s External back wire clamps provide visual indication of proper wire seating
s Withstand high torque and resist wire pullout
s Meet or exceed the latest UL® requirements
s Automatically test the GFCI every time the RESET
button is pushed in; the GFCI will not reset if
the GFCI circuit is not functioning properly
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Watertight and dust-tight for industrial applications
providing AC control for horsepower-rated motor loads.
V Leviton® PowerSwitch™ DS30-AX
s
s
s
s
s
s
s
Designed for easy installation,
Bottom-hinged enclosure, a Leviton exclusive for faster servicing
One watertight hub
Four mounting feet
Seven conduit entry points
Integral ground plate
One factory-installed auxiliary contact
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
For use in patient care areas of health care facilities.
V Leviton® Medical Grade Power Strips
s Available in 2-, 4- and 6-outlet configurations
s UL® 60601-1, UL® 1363A, and UL® 60950-1 compliant to meet all major
safety regulations required for health care facilities
s Surge-protected models are UL® 1449 3rd edition compliant, providing
the ultimate protection against voltage surges that can damage or diminish
the performance of sensitive electronic equipment
s All outlets are hospital grade, ensuring dependable performance
s Heavy-duty steel construction withstands the rigors of demanding
environments
s Locking safety covers are splash-resistant and protect from incidental
contact with unused outlets
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
17
Electrical Safety Solutions
Advanced technology helps protect against electrical fires
resulting from arc-faults.
V Leviton® SmartlockPro® Outlet Branch Circuit
AFCI Receptacles
s Meet or exceed UL® requirements for tripping time on both series
and parallel arcs
s Impact-resistant thermoplastic cover and body
s Advanced electronics design provides superior resistance to electrical
surges and overvoltage
s Automatically test the AFCI every time the RESET button is depressed;
the AFCI will not reset if the AFCI circuit is not functioning properly
s Dual-function LED offers indication of line/load reversal and power
availability
s There are four sets of contacts for load terminals
and face; SmartlockPro AFCIs use a patented
bifurcated bridge contact for efficient operation
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Ferraz Shawmut FSPDBs introduce a new level of safety
and ease for installing power distribution blocks.
V Finger-Safe Power Distribution Blocks (FSPDB)
s Provide a safe, convenient way of splicing cables, splitting primary power
into a variety of secondary circuits or providing a fixed junction tap-off point
s Finger-safe fully insulated block ensures that no one can touch live parts
s Recessed termination screws and wire openings provide IP20 grade
protection and qualify as finger safe per IEC 529
s Compact modularity single- or multiple-pole configurations in the most
compact footprint enables users to build
smaller or higher-density panels
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Ferraz Shawmut’s extensive line of fuses is matched
by our selection of finger-safe fuse holders.
V UltraSafe™ Fuse Holders (USCC, USM, and USJ)
USCC, USM — UltraSafe fuseholders for Class CC and Midget fuses
s All circuits up to 30A for 600 VAC and 1000 VDC for motors, control
circuits, transformers, etc.
s Finger safe to an IP20 grade of protection under IEC standards
s Fuse changes out with the flick of a finger
s Save up to 15% mounting space and any combination can be snapped
onto 35mm DIN rail for extra savings in panel building time
s Recommended fuse usage — ATDR, ATMR, ATQR, DCT, ATM
US3J and US6J — UltraSafe Fuseholders for 30A & 60A Class J Fuses
s All circuits up to 60A for 600 VAC
s Finger safe to an IP20 grade of protection under IEC standards
s Fuse changes out with the flick of a finger
s Accommodate 30A or 60A Class J ferrule fuses
s 35mm DIN rail compatible
s Available in compact 1-, 2-, or 3-pole units, with or without blown-fuse
indicators in each pole
s Recommended fuse usage — AJT, HSJ, A4J
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
18
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
Electrical Safety Solutions
Minimize arc flash hazards while providing Type 2 protection.
V Ferraz Shawmut Amp-Trap 2000® Fuses (AJT, A4BQ, ATDR, A6D)
The better your overcurrent protection, the easier it is to minimize downtime and
improve workplace safety. Ferraz Shawmut’s Amp-Trap 2000 current-limiting
fuses are perfect examples — they open in less than one-quarter cycle to
minimizing arc flash hazards while providing the Type 2 protection that prevents
costly damage to people and equipment.
AJT — Class J - Time Delay
s Provides maximum circuit protection in a minimal size
s Offers IEC Type 2 “no damage” protection to main, feeder, and branch
circuit components, for all types of loads — yet, they require only half the
mounting space needed for conventional 600-VAC Class RK fuses
s Visual open fuse indication
A4BQ — Class L - Time Delay
s 20% more current limiting than any other Class L fuse in the industry
s Provides a superior level of protection to service entrance equipment
s Downstream circuit components have maximum protection against short
circuit let-thru current
ATDR — Class CC - Motor Duty
s A small-dimension fuse which can provide IEC Type 2 “no damage”
protection to your facility’s increasingly sensitive branch circuit components
and small motors — minimizing the risk of fault-related damage
s Deliver the best time delay characteristics in their class with excellent
cycling ability for small motor loads
A6D — Class RK1 - Time Delay
s Upgrade yesterday’s circuits to today’s Type 2 protection.
s Opens fast enough under short circuit conditions for maximum short circuit
protection to prevent needless damage to motor starters, switches, and
other circuit components, yet are slow enough to provide the long time
delay for motor in-rush currents
s Visual open fuse indication
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Finger-safe capability for optimum workplace safety.
V Fusible Disconnect Switches (FUSERBLOC®)
Ferraz Shawmut FUSERBLOC disconnect switches are extremely durable,
manually operated, fusible disconnect switches providing finger-safe capability
for optimum workplace safety.
s Employ double break contacts per pole that ensure complete isolation of
the fuse when the switch is in the OFF position
s Provide the ultimate in short circuit protection when used with Ferraz
Shawmut’s Class CC, J, or L fuses
s Touch-safe fuse covers and compact footprints
provide maximum workplace safety
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
19
Electrical Safety Solutions
Designed to lock out a wide range of 3-phase
circuit breakers (227V and above).
V Panduit® Molded Case/Enclosed Systems
Circuit Breaker Lockout
s Installs quickly and easily without any tools
s Accommodates breaker handle dimensions up to
0.80" thick x 3.00" wide (20.00mm x 76.00mm)
s Constructed of rugged nylon and stainless steel, providing strength,
durability, added security, and corrosion resistance
s Secures and prevents re-engaging
of the breaker handle
WESCO Part No.
074983-62678
Mfr.’s Model No.
PSL-CBL
Large warning header, universal hazard symbols, and clear,
concise hazard description communicate arc flash hazard.
V Panduit® Arc Flash Labels
s Comply with 2005 NEC® Article 110.16 regarding
flash protection
s Available in a range of sizes and materials
WESCO Part No. Mfr.’s Model No.
Dimensions
Color
Material
Standard Arc Flash Labels__________________________________________
074983-85959
074983-85958
074983-85957
PPS0204W2100
PPS0305W2100
PPS0507W2100
2.25" x 4.50"
3.50" x 5.00"
5.00" x 7.00"
Black on Orange
Black on Orange
Black on Orange
Laminated Polyester
Laminated Polyester
Laminated Polyester
Detailed Arc Flash Labels __________________________________________
074983-91262
074983-91263
074983-48412
074983-48430
PVS0305W2101
PVS0507W2101
PVS0305D2101Y
PVS0305W2103Y
3.50" x 5.00" Black/Orange on White
5.00" x 7.00" Black/Orange on White
3.50" x 5.00" Black/Red on White
3.50" x 5.00" Black/Orange on White
Write-On Vinyl
Write-On Vinyl
Write-On Vinyl
Write-On Vinyl
Tape absorbs energy from ambient light and releases
the energy in the form of a glow when power is lost.
V Panduit® Photoluminescent Tape
s
s
s
s
Constructed of photoluminescent polyester
Tape can be used to print on-demand safety signs, directions, and striped tape
Material emits glow that is visible for up to 10 hours
Complies with ASTM, OSHA, NFPA, and other
photoluminescent safety marking standards
WESCO Part No.
074983-44956
074983-44955
Mfr.’s Model No.
T200X000Y2T
T400X000Y2T
Dimensions
2"W x 15'L
4"W x 15'L
Quickly lockout single-, double-, and triple-handle
circuit breakers with these safety solutions.
V Panduit® “No Tool” Circuit Breaker Lockouts
s
s
s
s
Innovative toggle set screw design eliminates need for a screwdriver to install
No modifications to the panel or breaker are needed to accommodate the device
Rugged nylon/stainless steel construction
Compact and lightweight
WESCO Part No.
074983-42118
Mfr.’s Model No.
PSL-CBNT
For Use with Square D I-LINE/Federal Pacific (FPE) Circuit Breakers _________
074983-42119
20
PSL-CBILNT
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
Electrical Safety Solutions
Locks out electrical disconnects, gate valves,
or large cumbersome devices.
V Panduit® Multiple Lockout Device
s Compact and easy to install (includes lockout hasp and cable)
s Constructed of rugged polycarbonate and stainless steel, providing
strength, durability, added security, and corrosion resistance
s Only one device needed to perform a variety
of lockout functions
WESCO Part No.
074983-62679
Mfr.’s Model No.
PSL-MLD
Lock out electrical supply controlled by ordinary toggle switches.
V Panduit® Wall Switch Lockout
s Compact, secure design fits most toggle switches and some small circuit breakers
s Accommodates switches 0.45"–0.78" (12.2mm–19.8mm) high x 0.25"– 0.38"
(6.4mm–9.6mm) wide x 0.25"–0.40" (6.4mm–10.2mm) thick
s Attaches easily without removal of face plate or screws
s Quick installation with standard screwdriver
WESCO Part No.
074983-34378
Mfr’s Model No.
PSL-WS
Insulated hand tools are necessary to meet NFPA 70E.
V Salisbury Insulated Hand Tools
s
s
s
s
s
s
s
Meet IEC 900 standard for insulated hand tools
Exceed current ASTM F 1505-07 standards for insulated hand tools
Tested to 10,000 VAC and rated for 1,000 VAC maximum exposure
Impact-resistant and flame-retardant two-color insulating material
Help meet OSHA requirements
Help meet NFPA 70E requirements
Made in U.S.A.
WESCO Part No. Mfr.’s Model No. Description
CALL
TK30
30 Insulated Tools in Plastic Tool Box
Salisbury rubber insulating gloves have earned the
reputation for superior performance.
V Salisbury Rubber Insulating Gloves and Glove Kits
s Meet and exceed the requirements of current ASTM D120 specifications,
IEC 903 and NFPA 70E standards
s Glove kits include a pair of specified rubber insulating gloves, appropriate
leather protector gloves, and a glove storage bag
NOTE: Class 00, Class 0, and Classes 1 and 2 are available in various colors and materials.
Must specify color, cuff, and hand size when ordering (include glove length when ordering a kit).
high voltage
low voltage
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
21
Electrical Safety Solutions
Arc flash hood specifically designed to meet NFPA 70E HRC2.
V Salisbury PRO-HOOD FH20BL/2 – HRC2
s Hood exceeds HRC2 ATPV requirements with an ATPV of 21.8 cal./cm2
s Lightweight — five layers of 5.5 oz./yd.2 material
s Highly comfortable and easy to work in
WESCO Part No. Mfr.’s Model No. Description
CALL
FH20BL/2
21.8 cal./cm2 HRC2 PRO-HOOD
Arc flash protection hood with a lightweight cooling system
that’s microprocessor controlled.
V Salisbury® PRO-AIR™ ACAIR2000™
s
s
s
s
s
s
Blows forced ambient air through single intake hose
Reduces shield fogging
Blows continuously for over three hours on one charge (pause button included if needed)
Intended to be used with arc flash protection hoods
Mounts to most standard hard hats
Lightweight — less than 10 oz.
WESCO Part No. Mfr.’s Model No. Description
CALL
ACAIR2000
Lightweight Air System for ARC Flash Protection Hoods
Simplify your arc flash purchasing. Salisbury kits come
complete to meet all your needs!
V Salisbury PRO-WEAR™ Personal Arc Flash
Protective Equipment Kits (without gloves)
PRO-WEAR Kits with PRO-HOOD™ (choose small to XXX-large)
Kits contain:
s PRO-HOOD™ (10" x 20" viewing area) with anti-fog lens that absorbs >99.9% UV rays
s Available in 8 cal./cm2, 11 cal./cm2, 20 cal./cm2, 31 cal./cm2, 40 cal./cm2,
55 cal./cm2, 75 cal./cm2, and 100 cal./cm2 ATPV options
s Safety glasses — anti-fogging, anti-scratch, and anti-static with 99.9% UV protection
s Kits also include arc flash coat, arc flash bib overalls, protective hard hat,
and SKBAG large storage bag
s PRO-HOOD meets current ASTM F2178 standards
s Coat, jacket, overpants, overalls, and PRO-HOOD meet current ASTM F1506
and NFPA 70E standards
s Safety glasses meet current ANSI Z87.1, CE EN166, and CSA Z94 standards
Other kit options:
s PRO-WEAR jacket kits include: arc flash jacket with hood, AS1000HAT, large
storage bag, ASBAG for AS1000HAT, and safety glasses — jacket kits with overpants are also available; available in 8 cal./cm2 or 11 cal./cm2 ATPV options
s PRO-WEAR coverall kits include: arc flash protective coveralls, AS1000HAT,
arc flash protective AFHOOD, large storage bag, ASBAG for AS1000HAT;
available in 8 cal./cm2, 11 cal./cm2 or 20 cal./cm2 ATPV options
NOTE: Must select ATPV and garment size when ordering.
Please contact your local WESCO Branch
for ordering information. For a list of Branches,
see pages 25–26.
Beat the heat!
V Ty-Rap® Extra High-Temperature Cable Ties
With increased stability under high
temperatures, these cable ties are ideal
for high-heat environments. Good up to 302˚ F.
WESCO Part No.
786210-95267
786210-95270
786210-95272
786210-95271
22
Mfr.’s Model No.
TYHT23M
TYHT25M
TYHT27M
TYHT28M
Length
3.62"
7.31"
13.40"
14.20"
Tensile Strength
18-lb.
50-lb.
120-lb.
50-lb.
Std. Pkg. Qty.
1,000 per Bag
1,000 per Bag
500 per Bag
1,000 per Bag
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
Electrical Safety Solutions
The most comfortable and efficient hand tools available
for installing cable ties.
V Ty-Rap® Cable Tie Installation Tools
An ergonomic handle, increased stroke length, and rotating nose reduce
operator fatigue and its long-term effects on fingers, wrists, and elbows.
WESCO Part No.
786209-86729
786209-86730
Mfr.’s Model No.
ERG50
ERG120
Description
Tool for 18–50 lb. (80–222 N) Cable Ties
Tool for 50–120 lb. (222–533 N) Cable Ties
Meets 2008 UL® requirements for fluorescent fixtures and ballasts.
V Sta-Kon® Luminaire Disconnect
The luminaire disconnects provide the means to disconnect power from a fluorescent
light fixture’s ballast during change-out. This protects the servicing electrician from
electrical shock and offers the added convenience of disconnecting a single lighting
fixture, rather than using a breaker to disconnect an entire back of fixtures.
WESCO Part No.
786209-86975
786209-86976
Mfr.’s Model No.
LD2
LD3
Description
2-Pole Luminaire Disconnect Kit
3-Pole Luminaire Disconnect Kit
The lockout/tagout devices you need to stay OSHA compliant!
V EZCODE® Lockout Devices
This line of products includes devices for locking out sources of stored energy,
such as plumbing valves and electrical devices. Using lockout devices in
conjunction with a sound lockout/tagout plan helps prevent many workplace
injuries, up to and including death.
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Dual-rated for both copper and aluminum conductors.
V Blackburn® Lay-in Lug
Open-faced design enables installer to quickly lay-in grounding conductor
as jumper to multiple conduits with no break in ground conductor.
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Fast, easy grounding to meet 2008 NEC® requirements!
V Blackburn Intersystem Bonding Termination
Meter Box Ground Clamp
This product provides convenient, reliable grounding for coaxial or telephone
drop wire runs. Available in two sizes, this versatile, adjustable, two-piece clamp
can mount either vertically on the side or horizontally across the top of any
meter box in service — without interfering with cover removal.
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
23
Electrical Safety Solutions
Cal Rating
of 7 cal./cm2
Lightweight with flame-resistant PVC on Nomex®.
V Tingley Electra™ Safety Rainwear
The combination of flame-resistant PVC coating on non-woven Nomex provides
excellent thermal performance and maintains 100% waterproof protection
in a soft, lightweight rainsuit.
s Conforms to ASTM F1891 for Arc Thermal Performance
s ANSI/ISEA 107 Class 3 compliant suit, jacket, and coat
for high visibility
s Fluorescent background colors for excellent daytime visibility
s 2" silver reflective trim reflects light
for 360° nighttime conspicuity
s Available in sizes from S–5XL
Cal Rating of 11 cal./cm2
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
Affordable, breathable, high-visibility safety outerwear.
V Tingley Vision™ Safety Outerwear
An innovative product that is ANSI 107 compliant for high visibility and
breathability. The Vision provides all-season comfort at an affordable price.
s
s
s
s
ANSI/ISEA 107 Class 3 compliant suit and jacket for high visibility and breathability
Designed for use in multipurpose applications
Fluorescent yellow-green background material for excellent daytime visibility
2" silver reflective tape reflects light for 360°
nighttime conspicuity
s Available in sizes from S–5XL
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
ANSI-compliant breathable and high-visibility outerwear.
V Tingley Icon™ Premium Outerwear
Engineered to provide superior comfort and safety in the toughest work environments.
s
s
s
s
s
s
s
s
s
s
s
ANSI/ISEA 107 Class 3 compliant suit, jacket, and coat for high visibility and breathability
Loaded with premium features for multipurpose applications
Fluorescent yellow-green background material for excellent daytime visibility
2" silver reflective tape reflects light for 360° nighttime conspicuity
Waterproof, breathable fabric for all-season comfort
Roll-a-way adjustable hood in collar design for added convenience
Hand warmer side pockets with front cargo pockets and hook and loop closure
Full-vented cape back for improved air circulation
D-ring access for fall-protection harness
Mesh/taffeta lining for added comfort
Available in sizes from S–5XL…
and many more features.
Please contact your local WESCO Branch for ordering information.
For a list of Branches, see pages 25–26.
24
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
WESCO Branch Listings
Product Focus Key
WESCO Branches carry a wide variety of products in their inventory; the key below merely indicates
the primary product type or service supported by each location.
Key
AV
BB
DC
EA
IN
IS
Product Focus
Audio Visual
(Liberty AV Solutions)
Broadband
(TVC)
Data Communications
(CSC)
Electrical and
Automation
(WESCO, EESCO, RECO)
International
(WESCO)
Integrated Supply
(WESCO)
M/S
OEM
SC
UT
RC
Manufactured
Structures
(Fastec)
Electromechanical
for Original
Equipment
Manufacturers
(Carlton-Bates)
Semiconductor
(WESCO)
Utility
(WESCO)
Retail & Commercial
Integrated Facility
Systems
Headquarters
WESCO Distribution, Inc.
Suite 700
225 W. Station Square Drive
Pittsburgh, PA 15219
(412) 454-2200
www.wesco.com
Need an Address?
Use the Branch locator on
www.wesco.com to find
addresses for our U.S.
Branches and to locate
a list of our international
operations.
4/2013
Kentucky
Lexington .................UT........ (859) 293-2647
Louisville ..................DC ....... (502) 451-6991
..................EA........ (502) 499-7667
Louisiana
Baton Rouge ............DC ....... (225) 752-5505
............EA........ (225) 755-0066
............OEM..... (800) 408-9775
Lafayette ..................EA........ (337) 839-8200
..................UT........ (337) 232-9164
Metairie....................EA........ (504) 835-8888
Monroe ....................EA........ (318) 323-9691
Ruston .....................EA........ (318) 255-0700
Shreveport................EA........ (318) 221-4121
................OEM..... (318) 861-0539
Maine
Bangor .....................EA........ (207) 942-6713
Ellsworth ..................EA........ (207) 667-0312
Portland ...................DC ....... (207) 347-3103
...................EA........ (207) 774-2614
Maryland
Baltimore..................EA........ (410) 563-8200
Jessup .....................MS ....... (240) 456-0720
Washington, DC ........DC ....... (240) 632-1500
Alabama
Florida
Massachusetts
Bear Creek ...............MS ....... (205) 486-9511
Birmingham ..............EA........ (205) 951-4601
..............EA........ (205) 321-6114
..............OEM..... (800) 223-6157
Huntsville .................EA........ (256) 746-8009
.................OEM..... (256) 721-9999
Mobile ......................EA........ (251) 433-4567
Doral ........................BB ....... (305) 716-2160
Ft. Lauderdale...........DC ....... (954) 777-1700
Gainesville ...............EA........ (352) 372-1427
Jacksonville ..............DC ....... (904) 732-9200
..............EA........ (904) 731-5900
Orlando ....................DC ....... (407) 292-4100
....................UT........ (407) 434-4025
Tallahassee ..............EA........ (850) 224-0188
Tampa ......................DC/EA .. (813) 884-7860
Winter Haven ............MS ....... (863) 298-0065
Boston ....................DC ....... (781) 932-5700
Westborough ............EA........ (508) 870-5000
Alaska
Anchorage ................DC ....... (907) 865-7422
................EA........ (907) 274-8525
................EA........ (907) 563-3350
Kenai .......................EA........ (907) 335-2030
Arizona
Colorado Springs ......AV ........ (602) 438-7100
Phoenix ....................BB ....... (623) 581-0331
....................DC ....... (480) 774-0055
....................EA........ (602) 275-8521
....................MS ....... (602) 258-9795
....................OEM..... (800) 622-4420
Tucson .....................EA........ (520) 623-6941
Arkansas
Fayetteville ...............EA........ (479) 251-7724
Fort Smith ................EA........ (877) 333-8077
Jonesboro ................EA........ (870) 931-7212
Little Rock ................DC ....... (501) 235-4235
................OEM..... (501) 562-9100
North Little Rock .......UT........ (501) 376-0391
Springdale ................EA........ (479) 750-2188
California
Georgia
Albany......................EA........ (229) 432-1285
Athens ....................EA........ (706) 543-3413
Atlanta .....................OEM..... (770) 242-0520
.....................UT........ (770) 477-3860
Augusta ...................EA........ (706) 793-7904
Duluth ......................OEM..... (770) 242-0520
Gainesville ...............EA........ (770) 532-9178
LaGrange .................EA........ (706) 884-8488
Macon .....................EA........ (478) 746-4227
Norcross ..................DC ....... (770) 564-4040
..................OEM..... (770) 564-4868
Savannah .................EA........ (912) 233-9681
Tifton .......................MS ....... (229) 388-8222
Valdosta ..................EA........ (229) 247-0642
Hawaii
Hilo ..........................EA........ (808) 935-4821
Honolulu ...................DC/EA .. (808) 839-7261
Kahului Maui ............EA........ (808) 877-5528
Kona ........................EA........ (808) 326-7377
Anaheim...................EA........ (714) 635-9710
Bakersfield ...............EA........ (661) 323-3163
Buena Park...............DC ....... (714) 670-7711
Chino ......................BB ....... (888) 484-5462
City of Industry..........UT........ (562) 463-5100
..........WC ...... (562) 463-5132
Compton ..................EA........ (310) 763-0007
Concord ...................EA........ (925) 246-7160
Fresno......................EA........ (559) 255-4423
Fullerton ...................BB ....... (888) 644-6075
Hayward ...................DC ....... (510) 491-1432
Livermore .................EA/UT... (925) 449-2550
Sacramento ..............EA........ (916) 928-1001
San Bernardino .........EA........ (909) 889-9791
San Diego.................DC/EA .. (858) 279-0233
Santa Clara...............EA........ (408) 562-0400
Van Nuys ..................EA........ (818) 787-3693
West Sacramento......MS ....... (916) 371-2150
Idaho
Colorado
Daleville ...................UT........ (765) 378-8030
Elkhart .....................MS ....... (574) 206-1517
Evansville .................EA........ (812) 423-1152
Hammond ................EA........ (219) 844-9400
................EA........ (219) 838-8300
Indianapolis ..............DC/EA .. (317) 266-1600
..............EA........ (317) 635-9361
Kokomo....................EA........ (765) 452-4087
South Bend...............EA........ (574) 288-0615
Garden City ..............EA........ (620) 275-2266
Kansas City ..............OEM..... (913) 438-4849
Newton ....................MS ....... (316) 283-1170
Colorado Springs ......AV ........ (719) 260-0061
Denver .....................DC ....... (303) 783-8900
.....................EA........ (303) 322-1722
.....................OEM..... (800) 622-4420
.....................UT........ (303) 217-7525
Durango ...................EA........ (970) 259-0427
Ft. Collins .................EA........ (970) 221-2002
Grand Junction .........EA........ (970) 242-8066
Parker .....................BB ....... (720) 842-1861
Pueblo......................EA........ (719) 545-1141
Connecticut
New Haven ...............UT........ (203) 784-7700
Stamford ..................DC ....... (203) 327-3200
West Haven ..............UT........ (203) 784-7700
Boise........................EA........ (208) 322-3200
Lewiston...................EA........ (208) 798-7521
Meridian ...................MS ....... (208) 887-0072
Pocatello ..................EA........ (208) 233-2003
Illinois
Carol Stream ............DC ....... (630) 221-6400
Champaign ...............EA........ (217) 355-4900
Chicago....................OEM..... (262) 376-3700
Decatur ....................EA........ (217) 875-7300
Elmhurst...................EA........ (630) 513-4864
Joliet .......................EA........ (815) 725-3900
Kankakee ................EA........ (815) 933-5536
Peoria ......................EA........ (309) 673-0707
Rockford ..................EA........ (815) 226-8750
Woodridge ...............EA........ (630) 296-2555
Indiana
Iowa
Delaware
Cedar Rapids ............EA........ (319) 364-1503
Des Moines ..............UT........ (515) 244-8611
Sioux City .................UT........ (712) 255-7634
Wilmington ...............EA........ (302) 655-9611
Kansas
Olathe .....................BB ....... (913) 324-6000
Overland Park ..........OEM..... (913) 362-1923
Wichita ....................DC ....... (316) 262-4105
....................EA........ (316) 267-4387
Michigan
Adrian ......................EA........ (517) 265-5148
Detroit ......................EA........ (586) 276-4888
Grand Rapids ............DC/EA .. (616) 241-2002
............OEM..... (616) 241-3483
Iron Mountain ...........EA........ (906) 776-0911
Jackson ..................EA........ (517) 782-7121
Lansing ....................EA........ (517) 887-0140
Livonia .....................OEM..... (734) 525-1155
Saginaw ...................EA........ (989) 790-5000
Sterling Heights ........DC ....... (586) 276-4888
Minnesota
Duluth ......................EA........ (218) 628-1024
Fridley ......................EA........ (763) 528-9772
New Brighton ............DC ....... (800) 435-7801
............EA........ (651) 582-3900
Virginia.....................EA........ (218) 749-2760
Mississippi
Gulfport ....................EA........ (228) 864-9090
Pascagoula...............EA........ (228) 762-0571
Missouri
Kansas City ..............EA........ (816) 231-7000
..............UT........ (816) 448-9239
Maryland ..................OEM..... (314) 997-7709
Springfield ................OEM..... (417) 862-1469
St. Louis ...................DC ....... (314) 655-5005
...................EA........ (314) 533-4250
...................OEM..... (314) 655-0261
...................OEM..... (877) 787-7130
Montana
Billings .....................EA........ (406) 252-0176
Butte ........................EA........ (406) 782-2374
........................UT........ (406) 782-2374
Nebraska
Grand Island .............EA........ (308) 384-9700
Lincoln .....................EA........ (402) 467-5311
Omaha .....................DC ....... (402) 333-5050
.....................EA........ (402) 333-2900
Nevada
Las Vegas.................DC ....... (702) 262-1387
.................EA........ (702) 253-7660
Reno ........................EA........ (775) 353-5417
New Hampshire
Manchester ..............DC/UT .. (603) 391-3118
New Jersey
Edison ......................DC ....... (732) 346-1550
New Mexico
Albuquerque ............DC ....... (505) 344-3400
............UT........ (505) 883-5666
Hobbs ......................EA........ (575) 397-0131
New York
Binghamton ..............EA........ (607) 729-1561
Buffalo .....................EA........ (716) 684-7300
Hauppauge ...............IS ......... (631) 582-4770
Long Island...............EA........ (718) 482-8341
New York ..................OEM..... (631) 696-8844
Port Washington........EA........ (516) 484-6070
Poughkeepsie ...........EA........ (845) 452-9000
Rochester .................DC ....... (732) 346-1550
.................EA........ (585) 458-1100
Syracuse ..................EA........ (315) 434-5500
Watertown ................EA........ (315) 788-7700
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
25
WESCO Branch Listings
North Carolina
South Carolina
Virginia
Apex ........................EA........ (336) 993-3806
Asheville...................EA........ (828) 254-3271
Charlotte ..................AV ........ (704) 393-3339
..................DC ....... (704) 588-0004
..................EA........ (704) 393-6636
..................WC ...... (704) 587-7131
Fayetteville ...............EA........ (910) 483-1107
Monroe ....................MS ....... (704) 283-7191
Raleigh ....................DC ....... (919) 871-0822
....................OEM..... (919) 832-6198
....................UT........ (919) 839-7600
Toddville ...................UT........ (704) 549-6061
Charleston ................EA........ (843) 767-0484
Columbia ..................DC ....... (803) 796-8849
..................UT........ (803) 739-5471
Florence ..................EA........ (843) 667-8632
Greenville .................EA........ (864) 286-1234
West Columbia ........EA........ (803) 936-9400
Hampton ..................EA........ (757) 826-6730
Lynchburg ................EA........ (434) 845-0948
Norfolk .....................DC ....... (757) 436-5400
.....................EA........ (757) 625-7451
North Dakota
Bismarck ..................UT........ (701) 255-3370
Fargo .......................UT........ (701) 232-4446
Ohio
Akron .......................DC ....... (330) 208-1900
Aurora ......................EA........ (330) 995-4300
......................UT........ (330) 562-8444
Cincinnati .................DC/EA .. (513) 542-4300
.................EA........ (513) 718-1111
Cleveland .................EA........ (216) 741-0441
.................OEM..... (800) 576-4533
.................WC ...... (216) 433-7614
Columbus .................DC/EA .. (614) 934-6300
.................OEM..... (614) 883-5571
.................RC ....... (614) 934-6400
Dayton .....................EA........ (937) 228-9668
.....................OEM..... (937) 384-0426
Wadsworth ...............BB ....... (888) 387-3828
...............BB ....... (800) 345-8454
Youngstown ..............EA........ (330) 726-7075
Oklahoma
Broken Arrow ............UT........ (800) 999-0957
Oklahoma City ..........DC ....... (405) 290-7026
..........EA........ (405) 232-5521
..........OEM..... (855) 433-9878
Tulsa ........................OEM..... (918) 806-0970
Tulsa/Broken Arrow ..DC ....... (918) 252-3535
Oregon
Eugene.....................EA........ (541) 225-2098
Portland ...................DC ....... (503) 221-5652
...................EA........ (503) 221-4400
...................UT........ (503) 221-5664
Wilsonville ................MS ....... (503) 682-6798
Pennsylvania
Altoona.....................EA........ (814) 943-5249
Annville TVC .............BB ....... (888) 644-6075
Chambersburg ..........BB ....... (800) 233-7600
Harrisburg ................EA........ (717) 901-9372
................MS ....... (717) 901-4844
Jamesburg/Phila. ......OEM..... (866) 331-1385
Johnstown................UT........ (814) 536-8761
Middleton ................BB ....... (888) 644-6075
New Brighton ............EA........ (724) 843-1810
Philadelphia .............DC ....... (610) 631-3340
.............EA........ (610) 539-4796
Pittsburgh.................DC ....... (330) 208-1900
.................EA........ (412) 688-1050
.................EA........ (724) 733-6800
.................UT........ (412) 393-8614
Reading....................EA........ (610) 921-1390
State College ............EA........ (814) 238-2449
WESCO Express ........EA........ (800) 438-9372
York .........................EA........ (717) 843-0891
26
Tennessee
Chattanooga .............UT........ (423) 622-1668
Gray .........................OEM..... (423) 477-2131
Johnson City.............MS ....... (800) 837-2505
Kingsport..................EA........ (423) 247-6195
Knoxville ...................MS ....... (865) 693-3344
Memphis ..................OEM..... (901) 365-3539
..................OEM..... (901) 433-3458
Nashville ..................DC ....... (615) 742-9901
..................EA........ (615) 242-7301
..................EA........ (615) 644-6801
..................OEM..... (615) 885-3232
..................UT........ (615) 242-7301
Texas
Amarillo....................UT........ (806) 379-8117
Austin .....................DC ....... (512) 238-8669
.....................SC ....... (512) 929-5253
.....................UT........ (512) 834-9977
Beaumont.................EA........ (409) 842-6400
Borger ......................EA........ (806) 274-5376
Dallas/Arlington ........MS ....... (817) 478-5476
Dallas/Ft. Worth ........DC ....... (972) 484-5700
........EA........ (972) 819-1970
........OEM..... (800) 622-4420
........UT........ (972) 819-1900
Deer Park .................EA........ (281) 479-9975
El Paso .....................DC ....... (915) 599-2809
.....................EA........ (915) 779-1435
.....................OEM..... (915) 599-2499
Houston ...................DC ....... (281) 848-1111
...................EA/IN.... (281) 848-1900
...................OEM..... (281) 925-4164
...................WC ...... (281) 848-1900
Lewisville..................BB ....... (888) 644-6075
..................BB ....... (888) 644-6075
Longview ..................EA........ (903) 757-4290
Lubbock ...................EA........ (806) 747-3256
McAllen ....................OEM..... (956) 971-9400
Mission ....................DC ....... (956) 585-2562
Odessa.....................EA........ (432) 332-0276
San Antonio .............DC ....... (210) 366-3648
.............EA........ (210) 341-1801
.............OEM..... (800) 622-4420
.............UT........ (210) 225-0492
Richmond .................OEM..... (804) 253-8900
.................UT........ (804) 340-9500
Roanoke ...................EA........ (540) 344-3271
Washington
Kennewick................EA........ (509) 783-1397
Seattle ....................DC ....... (425) 291-9700
....................EA........ (206) 292-4141
Spokane ...................EA........ (509) 456-7501
West Virginia
Beckley ....................EA........ (304) 252-8633
Bridgeport ................EA........ (304) 842-7844
Huntington................EA........ (304) 529-7111
Wheeling ..................EA........ (304) 232-5120
Wisconsin
Cedarburg ................OEM..... (262) 377-8000
Green Bay ................EA........ (920) 491-3300
................OEM..... (920) 499-6000
Manitowoc ...............EA........ (920) 684-6653
Middletown...............BB ....... (608) 831-0880
Milwaukee ................EA........ (414) 831-1504
Sheboygan Falls .......EA........ (920) 467-6100
Spencer ...................MS ....... (715) 659-5331
Wyoming
Gillette .....................EA........ (307) 687-0014
Green River ..............EA........ (307) 875-4910
Complete information for
each Branch — including
address, phone, fax, and
e-mail — can be found on
www.wesco.com.
Utah
Ogden ......................EA........ (801) 605-5630
Salt Lake City............DC ....... (801) 907-2050
............EA........ (801) 975-0600
Vermont
South Burlington .......UT........ (802) 864-9885
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
Electrical Safety Tips...
Use insulated tools when working on live electrical circuits.
A current that is 10 mA can paralyze muscles. If an
electrician is working with non-insulated tools, he or she
will not be able to release the tool when shocked, resulting
in longer shock exposure.
Perform the proper lockout/tagout procedures to protect
yourself and your coworkers from electrocution.
Properly label your electrical equipment so all
the workers are aware of any shock hazards.
Wear personal protective equipment such as flameretardant clothing, face shields, and insulated gloves
to keep you safe in the event of an arc flash.
Send your gloves out for inspection every six months to make
sure that they are properly rated to protect against an arc flash.
Turn off the power and unplug any equipment when connecting or disconnecting test leads.
Use clip leads or solder temporary wires to reach cramped locations or difficult-to-reach areas.
All pull boxes, junction boxes, and fittings shall be provided with covers. Metal covers must be grounded.
Maintain proper work distances and wear rubber gloves when working on overhead power lines.
Equipment rated for dry, indoor locations should not be used outdoors.
Make sure extension and flexible cords are in good working condition. Wear and tear can loosen or expose
wires, exposing you to electrical current. Cords that are modified or not designed for hard usage can also
be hazardous.
Do not use flexible wiring in situations requiring long-term electrical supply.
Do not use cords or tools with worn insulation or exposed wires.
Do not use circuit breakers or fuses without the proper rating for overcurrent protection.
Do not use modified cords or tools or remove ground prongs, face plates, or insulation. Do not attach
ungrounded, two-prong adapter plugs to three-prong cords and tools.
Inspect all electrical equipment before use. If equipment has frayed cords, missing ground prongs, or cracked
tool casings, take it out of service immediately. Apply a warning tag to the tool and do not use it until the
problem is corrected.
Isolate live electrical parts to prevent exposure.
Use GFCIs and overcurrent protection devices to protect against shocking currents in circuits.
Use insulation to prevent exposure to live wires and parts.
Avoid overloading wires by selecting the right size and type for the job.
Don’t Wait Until It’s Too Late to Find Out if Your Workplace Is Properly Protected.
The Electrical Safety Foundation International (ESFI) created the How Do You Know? program, sponsored by
WESCO, to provide a tool for managers and employees to develop a proactive approach to electrical safety
by determining the effectiveness of the current safety practices they have in place. Available for free on ESFI’s
website, How Do You Know? features the Electrical Safety Self-Assessment tool to help safety professionals
review and analyze their company’s electrical safety practices related to facilities, personnel, and procedures,
and a complementary video series reinforces the importance of electrical safety programs and compliance
with standards and regulations.
Once the assessment is complete, respondents can visit ESFI’s website for a library of safety
resources and links to help find the information required to take the next step. Don’t wait until
it is too late to assess your electrical safety program. Visit www.esfi.org for more information
on How Do You Know? and for ESFI’s comprehensive collection of electrical safety resources.
WESCO’s Electrical Safety Guide — For more information, log on to www.wesco.com
27
WESCO Delivers...
More Products
WESCO offers more than 1,000,000 electrical,
industrial, and general MRO products from industryleading manufacturers for every area of your facility.
Can’t find what you’re looking for? Call us!
Sourcing Services
WESCO is recognized as a leader in integrated supply
services. Our trained sales support staff will leverage
our relationships with more than 200,000 manufacturers
to supply exactly what you need.
Great Prices
Pricing is important, especially in today’s competitive
market. Get more for your money with WESCO. We offer
the best products at competitive prices — we encourage
you to compare!
Fast Delivery
To ensure prompt delivery, WESCO ships stocked items
same-day using WESCO delivery vehicles. Hard-to-find
products can also be shipped from our Distribution
Centers or directly from the manufacturer.
Quality Service
Rely on WESCO’s experienced local sales support
staff — available 24 hours a day, 7 days a week — to
help you select products that can reduce costs, improve
installation time, meet code requirements, and enhance
worker safety.
Local Availability
With a network of 475 stocking Branches and nine
major Distribution Centers throughout North America,
WESCO has a location nearby that can deliver the
products you need, when and where you need them.
Log On: www.wesco.com
Visit a local Branch
WESCO International, Inc. (NYSE: WCC), a publicly traded Fortune 500 holding company
headquartered in Pittsburgh, Pennsylvania, is a leading provider of electrical, industrial,
and communications maintenance, repair and operating (“MRO”) and original equipment
manufacturers (“OEM”) product, construction materials, and advanced supply chain management
and logistic services. 2012 annual sales were approximately $6.6 billion. The Company employs
approximately 9,000 people, maintains relationships with over 18,000 suppliers, and serves over
65,000 active customers worldwide. Customers include commercial and industrial businesses,
contractors, government agencies, institutions, telecommunications providers and utilities. WESCO
operates nine fully automated distribution centers and approximately 475 full-service branches in
North America and international markets, providing a local presence for customers and a global
network to serve multi-location businesses and multi-national corporations.
© Copyright 2013 WESCO Distribution, Inc. All rights reserved.
51659/0413/1304_0638