V2/28/01/2013
Assembly doctor COOLFIN S LED
Design by MaDe for DARK
228
50
1
standard 1500mm
4
3
2
1
130
5
5
92
1. Mount the ceiling bracket with 2 screws onto the ceiling.
2. Adjust the fixture to the preferred height and fasten the strainrelief.
3. Connect the LED-unit to the power supply.
IMPORTANT NOTICE
In all cases use enclosed handgloves to mount the fixture.
Ensure the power cable is not connected to the power supply!
Ensure the driver has not been powered for at least 1 minute before
connecting to the LED-unit.
Connect the LED side first, secondly the side of the mains.
-
- Xicato Certified Product -
LED Connection
4. Connect the power.
white
or
red
or
brown
=+
grey
or
black
or
blue
= -
5. Close the ceiling base.
Placing the powersupply on an electrical panel at distance :
cable = 1.25 mm²
max. distance = 10m for 1000mA / 15m for 700mA
IP20
This fixture complies to all the thermal
specifications of the LED-manufacturer.
Product guaranty only can be obtained if
used in combination with an approved
LED-driver by XICATO.Please visit
www.xicato.com.
* Please apply the LED Warranty Validation & Conditions.
5
0,3m
960 °C
years
warranty*
Lamp possibilities :
DARK
80
LED
> 80
700
CRI
mA
CRI
www.dark.be
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
fax +32(0)50/71.81.38
mail info@dark.be
1000 2000
LED
LED
> 95
CRI
mA
Lm
Watt
1000 14,6
Lm
1000 1300
mA
36,3
Lm
2700 K
3000 K
4000 K
2700 K
3000 K
Watt
4000 K
32,1
2700 K
3000 K
Watt
4000 K
40°
60°
DALI
1 ... 10V
40°
60°
DALI
1 ... 10V
DALI
1 ... 10V
40°
60°
INCL
DRIVER
INCL
DRIVER
INCL
DRIVER
V2/21/01/2013
Assembly doctor COOLFIN C LED
Design by MaDe for DARK
142
2
3
1
4
5
92
LED Connection
white
or
red
or
brown
=+
grey
or
black
or
blue
= -
1. Bore the required hole (pattern).
2. Mount the ceiling bracket with 2 screws onto the ceiling.
3. Connect the LED-unit to the power supply
and put the supply onto the ceiling.
4. Close the fixture and fixate it to the ceiling bracket.
IMPORTANT NOTICE
In all cases use enclosed handgloves to mount the fixture.
Ensure the power cable is not connected to the power supply!
Ensure the driver has not been powered for at least 1 minute before
connecting to the LED-unit.
Connect the LED side first, secondly the side of the mains.
-
<33W driver
>33W driver
ø 46-48mm
2x ø 35mm
5. Connect the powersupply.
Placing the powersupply on an electrical panel at distance:
cable = 1.25 mm²
max. distance = 10m for 1000mA / 15m for 700mA
- Xicato Certified Product This fixture complies to all the thermal
specifications of the LED-manufacturer.
Product guaranty only can be obtained if
used in combination with an approved
LED-driver by XICATO.Please visit
www.xicato.com.
IP20
* Please apply the LED Warranty Validation & Conditions.
960 °C
5
0,3m
years
warranty*
Lamp possibilities :
DARK
LED
80
LED
> 80
CRI
www.dark.be
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
fax +32(0)50/71.81.38
mail info@dark.be
LED
CRI
> 95
CRI
1000 2000
mA
700
mA
Lm
Watt
1000 14,6
Lm
1000 1300
mA
36,3
Lm
2700 K
3000 K
4000 K
2700 K
3000 K
Watt
4000 K
32,1
2700 K
3000 K
Watt
4000 K
40°
60°
DALI
1 ... 10V
DALI
1 ... 10V
DALI
1 ... 10V
40°
60°
40°
60°
INCL / EXCL
GEAR
INCL / EXCL
GEAR
INCL / EXCL
GEAR
V2/21/01/2013
Assembly doctor COOLFIN CROWN LED
Design by MaDe for DARK
230V
125
5
28
6
2
3
92
200
1
1. Make a square hole in the ceiling for the plasterkit.
200
2. Mount the plasterkit using screws.
3. Finish the seams using gypsum. Paper and paint the ceiling.
180
7
4. Take the fixture and fasten the fall relief.
IMPORTANT NOTICE
In all cases use enclosed handgloves to mount the fixture.
Ensure there is no power on the cables from the electrical panel!
Ensure the driver has not been powered for at least 1 minute before
connecting to the LED-unit. Connect the LED side first,
secondly the side of the mains.
5. Connect the power cable to the power supply.
4
6. Connect the LED-unit to the power supply. Put it on the ceiling.
7. Insert the fixture into the plasterkit,
push until it snaps into the bracket.
4
6
Placing the powersupply on an electrical panel at distance:
cable = 1.25 mm²
max. distance = 10m for 1000mA / 15m for 700mA
- Xicato Certified Product This fixture complies to all the thermal
specifications of the LED-manufacturer.
Product guaranty only can be obtained if
used in combination with an approved
LED-driver by XICATO.Please visit
www.xicato.com.
LED Connection
white
or
red
or
brown
=+
grey
or
black
or
blue
= -
* Please apply the LED Warranty Validation & Conditions.
IP20
DARK
www.dark.be
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
fax +32(0)50/71.81.38
mail info@dark.be
5
0,3m
960 °C
years
warranty*
Lamp possibilities :
LED
LED
> 80
700
CRI
mA
> 95
7 00
CRI
mA
1000 14,6
2700 K
3000 K
Lm
Watt
4000 K
700
14.5
2700 K
3000 K
Lm
Watt
4000 K
40°
60°
DALI
1 ... 10V
DALI
1 ... 10V
40°
60°
INCL / EXCL
GEAR
INCL / EXCL
GEAR
V2/21/01/2013
Assembly doctor COOLFIN BOX I LED
Design by MaDe for DARK
2
5
1
n 160
2
LED Connection
white
or
red
or
brown
=+
grey
or
black
or
blue
= -
1. Make a round hole in the ceiling.
2. Connect the LED-unit to the power supply
and put the supply onto the ceiling.
4
3. Press the mounting bracket up. Put the fixture
into the hole in the ceiling.
3
4. Push up the bracket with the screw from below.
Fixate the bracket by screwing.
IMPORTANT NOTICE
In all cases use enclosed handgloves to mount
the fixture. Ensure the power cable is not
connected to the power supply!
Ensure the driver has not been powered
for at least 1 minute before
connecting to the LED-unit.
Connect the LED side first,
secondly the side of the mains.
5. Connect the powersupply.
PUSH
PUSH
PUSH
Placing the powersupply on an electrical panel at distance:
cable = 1.25 mm²
max. distance = 10m for 1000mA / 15m for 700mA
- Xicato Certified Product This fixture complies to all the thermal
specifications of the LED-manufacturer.
Product guaranty only can be obtained if
used in combination with an approved
LED-driver by XICATO.Please visit
www.xicato.com.
IP20
* Please apply the LED Warranty Validation & Conditions.
960 °C
5
0,3m
years
warranty*
Lamp possibilities :
DARK
80
CRI
mA
LED
> 80
700
www.dark.be
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
fax +32(0)50/71.81.38
mail info@dark.be
700
LED
LED
CRI
mA
> 95
7 00
CRI
mA
1500
Lm
25
Watt
1000 14,6
2700 K
3000 K
4000 K
2700 K
3000 K
Lm
Watt
4000 K
1000
21
2700 K
3000 K
Lm
Watt
4000 K
40°
60°
DALI
1 ... 10V
DALI
1 ... 10V
DALI
1 ... 10V
40°
60°
40°
60°
INCL / EXCL
GEAR
INCL / EXCL
GEAR
INCL / EXCL
GEAR
V3/21/06/2013
Assembly doctor COOLFIN BOX II LED
Design by MaDe for DARK
5
2
LED Connection
L
B
1
x
white
or
red
or
brown
=+
grey
or
black
or
blue
= -
B = 148
L = 565
X min = 120
2
1. Make a hole in the ceiling.
2. Connect the LED-unit to the power supply
and put the supply onto the ceiling.
3. Press the mounting bracket up. Put the fixture
into the hole in the ceiling.
4. Push up the bracket with the screw from below.
Fixate the bracket by screwing.
IMPORTANT NOTICE
In all cases use enclosed handgloves to mount
the fixture. Ensure the power cable is
not connected to the power supply!
Ensure the driver has not been powered
for at least 1 minute before
connecting to the LED-unit.
Connect the LED side first,
secondly the side of the mains.
5. Connect the powersupply.
3
4
PUSH
PUSH
Placing the powersupply on an electrical panel at distance:
cable = 1.25 mm²
max. distance = 10m for 1000mA / 15m for 700mA
PUSH
- Xicato Certified Product This fixture complies to all the thermal
specifications of the LED-manufacturer.
Product guaranty only can be obtained if
used in combination with an approved
LED-driver by XICATO.Please visit
www.xicato.com.
IP20
* Please apply the LED Warranty Validation & Conditions.
960 °C
5
0,3m
years
warranty*
Lamp possibilities :
DARK
www.dark.be
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
fax +32(0)50/71.81.38
mail info@dark.be
2x
LED
80
CRI
mA
2x
LED
> 80
700
2x
LED
700
CRI
mA
> 95
7 00
CRI
mA
1500
Lm
25
Watt
1000 14,6
2700 K
3000 K
4000 K
2700 K
3000 K
Lm
Watt
4000 K
1000
21
2700 K
3000 K
Lm
Watt
4000 K
40°
60°
DALI
1 ... 10V
DALI
1 ... 10V
DALI
1 ... 10V
40°
60°
40°
60°
INCL / EXCL
GEAR
INCL / EXCL
GEAR
INCL / EXCL
GEAR
V2/26/01/2013
Assembly doctor COOLFIN GU10 S
Design by MaDe for DARK
32
101
1500
1
standard
3
2
130
1
92
1. Mount the ceiling bracket with 2 screws onto the ceiling.
2. Adjust the fixture to the preferred height
and fasten the strainrelief.
3. Connect the power supply and close the ceiling base.
4
4. (Re)place the lamp.
IMPORTANT NOTICE
In all cases use enclosed handgloves to mount the fixture.
Lamp possibilities :
DARK
QPAR51
GU10
max
50
Watt
www.dark.be
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
fax +32(0)50/71.81.38
mail info@dark.be
0,3m
230 V
IP20
960 °C
V2/26/01/2013
Assembly doctor COOLFIN GU10 C
142
Design by MaDe for DARK
1
92
3
2
1
4
1. Mount the ceiling bracket with 2 screws onto
the ceiling.
2. Connect the power supply.
3. Fixate the fixture to the ceiling bracket.
4. (Re)place the lamp.
IMPORTANT NOTICE
In all cases use enclosed handgloves to mount the fixture.
Lamp possibilities :
DARK
QPAR51
GU10
max
50
Watt
www.dark.be
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
fax +32(0)50/71.81.38
mail info@dark.be
0,3m
230 V
IP20
960 °C
V2/21/01/2013
Assembly doctor COOLFIN GU10 CROWN
125
Design by MaDe for DARK
5
28
230V
2
3
92
200
1
200
180
6
7
1. Make a square hole in the ceiling for the plasterkit.
4
2. Mount the plasterkit using screws.
3. Finish the seams using gypsum. Paper and paint the ceiling.
4
6
4. Take the fixture and fasten the fall relief.
5. Connect the power cable.
6. Insert the fixture into the plasterkit,
push until it snaps into the bracket.
7. (Re)place the lamp.
IMPORTANT NOTICE
In all cases use enclosed handgloves to mount the fixture.
7
Lamp possibilities :
DARK
QPAR51
GU10
max
50
Watt
www.dark.be
Dark at night
Vliegplein 43 - 9991 Maldegem
Belgium - Europe
tel
+32(0)50/71.81.40
fax +32(0)50/71.81.38
mail info@dark.be
0,3m
230 V
IP20
960 °C