ANALOGUE OSCILLOSCOPES
OD-512, OD-514B, OD-515B, OD-545B, OD-540
OD-512
OD-540
OD-515B
This new family of Oscilloscopes PROMAX OD-5XX consists of 5 double-trace oscilloscopes. The OD-5XX are sturdy, easy to operate and exhibit
high operational reliability, they have got advanced functions and measurement capabilities, such as cursor readout, delay time double-base, on
screen alphanumerical indication, trace intensity modulation, the possibility to display TV signal etc.
The next table summarises the principal characteristics of these models, thus it becomes easier to identify the required configuration/specification.
SPECIFICATIONS
Vertical amplifiers
Bandwidth
Sensitivity
Sweep Magnification
Accuracy
Variable Attenuator
Input voltage
Input impedance
Operating modes
Delay
Coupling
Dinamic Range
X-Y Operating
X Axis
Y Axis
Horizontal Deflection
A Time base
Sweep rate
Hold off time
B Time base
Sweep rate
Accuracy
Delay
Jitter
Operating modes
Accuracy
Magnification
3
OD-512
DC to 20 MHz
5 mV to 5 V/div
10 steps, sec. 1-2-5
x 5 CH1 and CH2
£3% (x 5 MAG£ 5%)
OD-514B
OD-515B
OD-545B
DC to 40 MHz
DC to 60 MHz
1~2 /div DC to 10 MHz
1~2 mV/div DC to 15 MHz
1mV to 5 V/div, in 12 steps sequence 1-2-5
1 mV to 5 mV / div. DC 15 MHz
--5 mV to 5 V/div: £ 3%, 1 mV to 2 mV/div: £ 5% (10ºC to 35ºC)
OD-540
DC to 100 MHz
2mV to 5 V/div, 11steps
sequence 1-2-5
± 3% (5 div at
Display center)
Continuosly variable (minimum 2.5:1)
Max. 300 V (DC+peak AC)
> 5 div to 20 MHz
Max. 400 V (DC+peak AC)
1 MW // 25 pF approx.
CH1, CH2 , DUAL (ALT, CHOP) CH1 ± CH2
--Yes
AC-GND-DC
>4 div to 40 MHz
Same as CH1 (DC~500 kHz) same as CH1 (DC-1 MHz)
Same as CH2 (DC~500 kHz) Same as CH2 (DC-1 MHz)
0.2 ms to 0.5 s/div
20 steps seq.1-2-5
---------
>8 div to 50 MHz, >5 div to 60 MHz
same as CH1 (DC-2 MHz)
same as CH2 (DC-2 MHz)
0.1 ms/div to 0.5 s/div in 21 steps sequence (1-2-5)
8 div to 60 MHz,
>5 div to 100 MHz
same as CH1(DC-500 kHz)
Same as CH2 (DC-500 kHz)
50 ns to 0.5 s/div
cont. variable
variable
Countinuosly variable ³ double of the duration of the sweepingin the scales
----Yes
----0.1 ms to 5 ms/div
50 ns to 50 ms / div
----±3 %
1 ms to 5 ms
1 ms to 5 s
------£1 / 10000
< 1/20000
A, X-Y
A, A INT, B, B TRIG’D
A, ALT, DELAY (B)
NORM: ± 3%,x10MAG± 5%
NORM: ±3%, x 10 MAG: ± 5% (0.1 ms to 50 ms/div)
x 10
SPECIFICATIONS
Triggering
Source
Modes
Couppling
Slope
Sensitivity
Internal
External
Z Modulation
Input voltage
Sensitivity
Probe adjustment
Output voltage
Frequency
Readout function
Indication
CRT
Area
Acceleration voltage
Scale illumination
Intensity control
Traze rotation
Power supply
Mains voltage
Consumption
Mechanical features
Dimensions
Weight
Included accesories
CH1, CH2, LINE, EXT
AUTO, NORM and SINGLE
AC, HF-REJ, TV, DC
+/0.5 div (DC to 10 MHz)
0.5 div (20 Hz to 2 MHz)
0.5 div (DC to 10 MHz)
1.5 div (10 to 50 MHz)
1.5 div (2 to 20 MHz) 1.5 div (10 to 40 MHz)
2 div (50 to 60 MHz)
0.2 V (20 Hz to 2 MHz) 0.1 V (DC to 5 MHz)
0.1 V (DC to 10 MHz)
0.8 V (2 to 20 MHz)
0.6 V (5 to 40 MHz)
0.2 V (10 to 50 MHz)
0.3 V (50 to 60 MHz)
AUTO, NORM, TV-V,TV-H
AC, TV/V, TV/H
30 V (DC + peak AC)
5 Vpp
50 V (DC + AC peak, frequency AC !1 kHz)
3 Vpp
AUTO, NORM, TV
AC, DC, HFR, LFR
0.35 div (10 Hz to 20 MHz)
1.5 div (20 MHz to 100 MHz)
50 mVpp (10 Hz to 20 MHz)
150 mVpp (20 to 100 MHz)
30 V (DC+AC pp)
5 Vpp
2 Vpp ± 2 %
1 kHz approx.
"V, "V#$%"VdB,"&
'("&$%DUTY, PHASE
---
"V, "V#$%"VdB, "&$
'("&$%"&%#$%")%
8 x 10 div (1 div = 10 mm)
Approx. 2 kV
No
Approx.12 kV
Adjust level scale
No
Yes
Yes
115(97to132),230(195to250)V AC
35 W
8 kg
Mains cable CA-006
2 Probes SA-014
100 / 120 / 220 / 230 V AC, 50-60 Hz with selector
60 W
310 W. x 150 H. x 455 D.
8.2 kg
Mains cable CA-006
2 Probes SA-016
100/120/230 V AC± 10 %
70 W
9 kg
Mains cable CA-006
2 Probes SA-017
4