High Performance
Dia-Vac®
Sampling Pumps
Diaphragm Pumps
For Demanding
Applications
The High Performance Dia-Vac® pump was designed to provide greater response in the most demanding
applications. These durable pumps are available with General purpose, TEFC, and Explosion proof UL/CSA
Div I Class I group C and D, and Flameproof ATEX certified EEXD IIC T4 IP65 motor options. Wetted parts
are available with 316 Stainless steel for added corrosion resistance. Maximum performance: 0-29.5” HG, 084 LPM, 0-60 PSIG. You can count on the New High Performance Dia-Vac® to pass your gas with
confidence.
ADI’s rugged High Performance Dia-Vac® pumps are available from inventory with the following motor
classifications:
Type
Motor
Classifications
GP
115/230V, 60Hz (1/4 HP)
UL, CE, CSA General Purpose motor
UL XP
115/230V, 50/60Hz (1/2 HP)
UL and CSA listed Class I, Division I, Group C and D explosion proof
ATEX XP 115/230V, 50 Hz (1/2 HP)
EExd IIC T4 IP 65 ATEX certified Flameproof. CE approved.
TEFC
Totally Enclosed Fan Cooled, IP55
115/230V, 50/60 Hz (1/3 HP)
The exceptionally quiet HP Dia-Vac® is designed to operate for long periods of time without maintenance.
Dia-Vac® pumps will not contaminate your sample and no oil, graphite or other contaminating lubricants will
come in contact with the sample stream. Please refer to the back page or visit our website at
www.airdimensions.com for more information.
H302-FP-AA1-M
Double Heated Head
High Performance Dia-Vac®
Pump
H302-FT-GB2
H302-FT-AA1
H302-FT-NA1
Double Head High Performance
Dia-Vac® Pump with ATEXcertified Flameproof motor
Double Head High Performance
Dia-Vac® Pump with General
Purpose motor
Double Head High Performance
Dia-Vac® Pump with UL listed
Class I Div. I Grp. C/D Explosion
Proof motor
1371 West Newport Ctr. Drive
Suite 101
Deerfield Beach , FL
33442
(06/07)
Phone: 954-428-7333 ● 800-423-6464
Fax:
954-360-0987
Email: info@airdimensions.com
web:
www.airdimensions.com
"We Pass Your Gas"
Specifications:
Diaphragm Material
See Key Below
Electrical
See Key Below
Body Material
Cast Aluminum
Gas temp Range
30° to 400° F
Connecting Rod Material
Cast Aluminum
Port Connections
1/4 NPT
Motor 1 or 2 Stage
1/4 HP, 5/8 in. shaft (GP mtr)
Ambient Temperature
140°F
High Performance Dia-Vac®:
ADI’s High Performance Dia-Vac® Pump was designed to offer exceptional flow for applications requiring fast response time. The eccentric size
on the HP is .300. Please contact the factory at 800-423-6464 or visit our website www.airdimensions.com for more information on how the HP
Dia-Vac® can help improve the efficiency of your specific application.
HP Dia-Vac® Flow Averages
Model #
Eccentric
PSIG
Bar
InHg
Mbar
CFM
LPM
H301
.300
60*
4.14*
26.0
904
1.41
40
H302 (series/parallel)
.300
60* / 60
4.14* / 4.14 27.0 / 29.5
914 / 982
2.93 / 1.50
84 / 43
•
•
•
H302-FT-AA1 (shown)
Continuous pressure in excess of 75 PSI should be avoided due to decreased diaphragm and bearing life.
Test results are approximate. These test results are for reference only, and are intended to help provide information to the user when determining which pump to buy.
Reduce flow 17% for 50 Hz.
How to Specify and Order Pumps from Air Dimensions, Inc.
CAPACITY
STYLE
H=High Perf.
WETTED MATERIALS
ECC. HEADS HEAD
30
1
F=316ss
2
DIAPHRAGM
T= Teflon/EPDM
P= All Teflon
-
TYPE
A= General Purpose
C= TEFC
G= XP/ATEX/IIC
N= XP (Grp CD UL)
POWER
VOLTS
A=115
B=230
Hz
1=60 1Ph
2=50 1 Ph
-
OPTIONAL
OPTIONS
L= Elevated Head (1 Hd. Only)
M= Heated Hd. w/ Thermocouple
M2= 65ºC Thermostat
M3= 100ºC Thermostat
M4= 140ºC Thermostat
M5= 163ºC Thermostat
M6= 200ºC Thermostat
Example:
H302−FT−NA1 : Dual Stage HP Dia−Vac® w/ SS heads, .300 ecc., TFE/EPDM diaphragm, 115v/60Hz Grp. C/D motor
954-428-7333 •800-423-6464
info@airdimensions.com • www.airdimensions.com
(06/07)
"We Pass Your Gas"