Monica
We reserve the right to revise the design or components of any product without notice.
Indoor/Outdoor Wall Sconce;
CFL, LED
CATALOG #
TYPE
PROJECT/LOCATION
APPROVED BY
SPECIFICATIONS
ARCHITECTURAL SERIES
• BALLAST— High Power Factor Electronic Ballast.
• BACKPLATE— 16 Gauge aluminum (AL)
• CENTER WINDOW OPENING — White Translucent Opal Acrylic (OPL) is standard.
Optional 0.125 (1/8”) Thick Clear Prismatic Acrylic. Specify Color - Black (BK), White (WH), Red (RD), Blue (BLU), Green (GN), Amber (AM) or Custom Color (consult factory) (CC).
• SIDE WINDOW OPENING — 0.125 (1/8”) Thick Clear Prismatic (CPR) Acrylic standard. Provides glow of Light on all four sides. Specify Color - Black (BK), White (WH), Red (RD), Blue (BLU), Green (GN), Amber (AM) or Custom Color (consult factory) (CC)
• EMERGENCY — CFL, LED — Remote Only.
• FINISH — Corrosion and Weather resistant pre-treated extremely durable oven baked
polyester powder.
• GASKETING — High temperature, non-aging black EPDM and/or neoprene rubber around the entire lens perimeter and rear wire entrance hole to protect against dust, moisture and
outside contaminants
• FASTENERS — Stainless steel tamperproof screws—(2) To secure lens in place
• HOUSING — 16 Gauge Aluminum (AL). Housing Finish with Side Light is Standard.
Available also as Downlight Only—Dark Sky (DK). Refer to options for Finish Color.
• HOUSING WINDOW DESIGN — Square Opening (SQ1) is Standard. Consult Factory to “Design your own Fascia”.
• LAMPING — Double (DTT), Triple Twin Tube (TTT) - SUPPLIED BY OTHERS.
• MOUNTING — Center access hole for indoor mounting to a “J” box or use (4) 5/16” dia. holes for 1/4” diameter bolts for outdoor or indoor for some models.
• UL/ULC Listed to U.S. and Canadian safety standards - Suitable for wet locations.
Shown with Clear Prismatic Acrylic (CPR)
OPTIONS
North
East
West
South
Shown with Opaque Sides (OS)
DIMENSIONS
15”
4-1/2"
15”
15”
9245 W. Ivanhoe St. I Schiller Park, IL 60176
P: 847-260-0333 I F:847-260-0344 I E: quotes@eclipselightinginc.com I W: eclipselightinginc.com
© 2015 Eclipse Lighting Inc.
Eclipse Lighting pg.75 Rev. Dec 5, 2015
Monica
LAMP TYPE/QTY/WATTAGE ❶
Visit www.eclipselightinginc.com for available IES files
Fixture
Indoor/Outdoor Wall Sconce;
CFL, LED
Series Style Lamp/Qty/Watt MONICA
Dimensions - W x H x D
Compact Fluorescent
Double Twin Tube
Compact Fluorescent
Triple Twin Tube
15” x 15” x 4½”
DTT
(2)26w
TTT
(1 or 2)32w; (1)42w
Light Emitting Diode
LED
20/40w
Color Temp Volt: Primary/Emergency Ctr Wind Side Wind
Finish Options
ORDERING GUIDE:
SERIES
SIDE WINDOW OPTIONS
MC = Monica Series
STYLE - HOUSING WINDOW DESIGN
SQ1 = Square Opening (1-Square)—Standard
CR = Custom Requirement (Design Own Fascia)
LAMP TYPE/QUANTITY/WATTAGE
Refer to Chart Above
VOLTAGE
120
277
347
EBU
= 120 Volts EB
= 277 Volts EB
= 347 Volts EB
= Universal Volt (120-277v) CENTER WINDOW OPTIONS
AM
BLU
CC
GN
RD
CPR
OPL
3K
4K
5K
6K
= ±3000K range
= ±4000K range
= ±5000K range
= ±6500K range
Fluorescent Emergency Battery
REL2 = Remote: DTT/TTT; 1-2 Lamp; 650 Lms
REL35 = Remote, Cold Weather: (1-2)TT/DTT/TTT; 1250 Lms
REL52 = Remote, Cold Weather (Bodine)
DTT/TTT; 1-2 Lamp; up to 1250 Lms)
OPTIONS
FUS = Single Fusing
DFUS = Double Fusing
GTD = Generator Transfer Device (Bodine)
LED OPTIONS
BL = Dual Circuit for Bi-Level light (High/Low),
includes 2EBU
D7 = 0-10V low-voltage dimming (100-30% Standard,
Consult Factory for Other)
MSI = Motion Sensor Integral⓴ Single circuit-all on, all off
MSI2 = Motion Sensor Integral⓴ Dual circuit, half on half off SG = 10KA Surge Protection for LED fixtures
(meets ANSI spec C62.41.2)
❶ Consult Factory with requests regarding lamp sources, including LED, color temp., wattages or voltages not shown.
❸ Consult Factory for additional Emergency Battery options.
⓴ Max mounting height of fixture is 10 feet.
Max WHIP length with the REL provided by the factory is 8 feet.
Consult Factory for other Voltage
Due to form and fit, final selection of the Battery Pack under discretion of Factory
pg.76 Eclipse Lighting
Rev. Dec 5, 2015 No onsite Emergency Power (AC or DC) is provided
Specify Fixture Voltage: 120V or 277V Power Feed
A=120V or B=277V
BK = Black
BZ = Bronze
CC = Custom Color (Consult Factory)
PNA = Painted Natural Aluminum
WH = White
NOTES:
© 2015 Eclipse Lighting Inc.
EMERGENCY BATTERY OPTIONS❸
FINISH (HOUSING COLOR)
= Amber
= Blue
= Custom Color (Consult Factory)
= Green
= Red
= Clear Prismatic Acrylic
= Translucent Opal White Acrylic (Standard)
COLOR TEMPERATURE
AM = Amber
BLU = Blue
CC = Custom Color (Consult Factory)
GN = Green
RD = Red
CPR = Clear Prismatic Acrylic (Standard)
OPL = Translucent Opal White Acrylic
OS = Opaque Sides – *SPECIFY: North (N),
South (S), East (E), West (W), All (A)
DK = Dark Sky (3 Sides Opaque)
LED Emergency Battery REL61
REL63
REL67
REL82
REL85
REL88
= Remote: LED 12W, ± 720 Lms (by Iota)
= Remote: LED 23W, ± 1290 Lms (Bodine)
= Remote, Cold Weather: LED 23W, ± 1290 Lms (Iota)
= Remote: LED 4W (Fulham)—Factory Recom’d
= Remote: LED 20W (Fulham)—Factory Recom’d
= Remote: LED 16W (Fulham)—Factory Recom’d
LED EMERGENCY CIRCUIT
Onsite Generator Power (AC) or Battery Power (DC)
is provided via separate circuit to the fixture
EC1A = (1) 5W LED for Line Voltage (120VAC)
EC2A = (1) 5W LED for Line Voltage (277VAC)
EC3A = (2) 5W LED for Line Voltage (120VAC)
EC4A = (2) 5W LED for Line Voltage (277VAC)
EC1D = (1) 5W LED for Low Voltage (12VDC)
EC2D = (1) 5W LED for Low Voltage (24VDC)
EC3D = (2) 5W LED for Low Voltage (12VDC)
EC4D = (2) 5W LED for Low Voltage (24VDC)
9245 W. Ivanhoe St. I Schiller Park, IL 60176
P: 847-260-0333 I F:847-260-0344 I E: quotes@eclipselightinginc.com I W: eclipselightinginc.com