k16.13
Stainless steel door handles
2.4. Order table door handles with short backplate
Type of grip
Order code
Oval backplate
Round backplate
Rectangular backplate
1800
1805
1805AL
1810
1801
1806
1806AL
1811
1802
1807
1812
1803
1808
1808AL
1813
1804
1809
-
1816
1817
-
1818
1819
1814
-
1826
1827
•When ordering please indicate quantity of left hand and right hand turn handles.
•Order codes with AL, example 1805AL: type in aluminium (painted or anodised).
2.5. Order table square spindles
Type of grip
Section depth
Spindle length Order code
•Notes:
1) All sizes only apply if both the interior
and the exterior handle is mounted.
25-45
45-65
55-75
65-85
70-90
80-100
90-110
100-120
mm
mm
mm
mm
mm
mm
mm
mm
See note 2
Door handles and door pulls
90
115
125
135
140
150
160
170
90
115
125
135
140
150
160
170
V48-90
V48-115
V48-125
V48-135
V48-140
V48-150
V48-160
V48-170
V48-90
V48-115
V48-125
V48-135
V48-140
V48-150
V48-160
V48-170
2) The spindle length when using
rolling shutter handle n° 1843, can be
calculated with the following formula:
L = P + 30±2mm with:
- L = spindle length
- P = section depth
3) The square spindles are fixed by a
grub screw in the slotted part of the
spindle. At least 1 screw must engage
in the slot of the square spindle when
there’s a door handle at both sides.
4) The square spindles are also available
in large scalement package (G) per 50
pieces. Ordering example: GV48-90.
k16.13.09
k16.13
Stainless steel door handles
2.6. Escutcheons
•The escutcheons are used in combination with the door handles with short backplate. Finish and properties
same as the door handles.
•The escutcheons are also available without cylinder hole (C). When ordering please add a C at the order
code.
•AL = escutcheon in aluminium,
coated or anodised.
n° 1820
n° 1820C
n° 1821
n° 1822
n° 1823
n° 1823C
n° 1823AL
n° 1824
n° 1824C
n° 1824AL
k16.13.10
Door handles and door pulls
k16.13
Stainless steel door handles
2.7. Fixed knob on short backplate n° 1866-..
•The fixed knob on short backplate n° 1866-.. is used in combination with the door handles with short
backplate and separate escutcheons.
•The special spindle of 8 mm is included. The spindle is screwed into the fixed knob and connected to
the door handle. The spindle part in the door handle rotates whereas the fixed knob is not moving. The
spindle connects the 2 door handles together, in order to get a better positioning and a stronger fixing.
•Finish and properties same as the door handles.
n° 1866-..
Order code
1866-95
1866-110
1866-125
Spindle length
95
110
125
Section depth
30-48
49-62
63-75
Not available in spindle length 135.
2.8. Bathroom knob n° 1829
•The turn knob is used to operate the doors of sanitary rooms.
•The turn knob is supplied with a steel zinc plated square spindle of 8 mm and with a red-green indicator.
Suitable for section depths from 20 to 45 mm.
•Finish and properties same as the door handles.
Door handles and door pulls
k16.13.11
k16.13
Stainless steel door handles
3.Door handles with long backplate
•Finish and properties same as the door handles with short backplate. The door handles with long backplate
have a powerful concealed spring.
•The door handles are available without cylinder hole (C). When ordering please add a C at the order code.
Example n° 1845C.
•The square spindle must be ordered separately, see order table page K16.13.14.
•When ordering please indicate quantity of left hand and right hand handles.
3.1. Door handles
70
right hand = illustrated
left hand = opposite view
9
48
38.5
21.5
21.5
5
118.
17.7
60
Ø20
52
8
92
135
17.4
220
19.8
10.4
28
n° 1845(C)
90
70
75
Ø20
Ø20
130
n° 1846(C)
115
n° 1847(C)
k16.13.12
Door handles and door pulls
k16.13
Stainless steel door handles
70
Ø20
135
n° 1848(C)
74
55
Ø20
150
n° 1849(C)
31
Ø12
133
n° 1843(C)
Door handles and door pulls
k16.13.13
k16.13
Stainless steel door handles
3.2. Order table door handles with long backplate
Type of grip
Order code
1845
1845AL
1846
1846AL
•When ordering please indicate quantity of left hand and right hand
turn handles.
•Order codes with AL, example 1845AL: type in aluminium (painted
or anodised).
1847
1845
1845AL
1849
1843
3.3. Order table square spindles
Type of grip
Section depth
25-45
45-65
55-75
65-85
70-90
80-100
90-110
100-120
mm
mm
mm
mm
mm
mm
mm
mm
See note 2
Spindle length Order code
90
115
125
135
140
150
160
170
V48-90
V48-115
V48-125
V48-135
V48-140
V48-150
V48-160
V48-170
90
115
125
135
140
150
160
170
V48-90
V48-115
V48-125
V48-135
V48-140
V48-150
V48-160
V48-170
•Notes: see order table square
spindles for door handles with short
backplate page K16.13.09.
3.4. Safety screw set n° 1895-.. for long backplate
Order code
1895-65
1895-70
1895-75
1895-80
1895-90
Screw L
65
70
75
80
90
mm
mm
mm
mm
mm
Section depth
base = 9 mm
54-59
59-64
64-69
69-74
79-84
M4
M4
•The door handles per pair can be fixed with a safety screw set, where both handles are screwed together
through the lock.
•The set contains the following parts:
15
-- 2 screws M4xL
-- 2 sleeve nuts M
L
Note: please order 2 screw sets per pair of door handles with long backplate.
k16.13.14
Door handles and door pulls