Real time clock module Epson Toyocom Low current consumption I2C-Bus INTERFACE REAL TIME CLOCK MODULE RTC - 8564 JE / NB •Built in frequency adjusted 32.768 kHz crystal unit. •Interface Type ׃I2C-Bus Interface (400 kHz) •Operating voltage range ׃1.8 V to 5.5 V •Timekeeper voltage range ׃1.0 V to 5.5 V / -20 °C to +70 °C •Low backup current ׃275 nA / 3.0 V(Typ.) •32.768 kHz frequency output function ׃C-MOS output With Control Pin •The various functions include full calendar, alarm, timer, and power supply voltage monitoring function Actual size RTC-8564JE RTC-8564NB 2 * The I C-Bus is a trademark of NXP Semiconductors Block diagram Overview 32.768 kHz CRYSTAL OSC Voltage Detector • Interface Type 2 00 Control 1 •I C-Bus Interface. ( Hi-speed bus specifications 400 kHz ) 2 ∗ I C-Bus slave address : read A3h and write A2h Control 2 Seconds • Low Timekeeper voltage range Minutes CLKOUT CLKOE •1.0 V to 5.5 V / Ta = -20 °C to +70 °C •1.1 V to 5.5 V / Ta = -40 °C to +85 °C Hours OUTPUT DIVIDER CONTROL Days • 32.768 kHz frequency output function Weekdays •CLKOUT pin output (C-MOS output ), CL=30 pF •CLKOE pin enables output on/off control. •Output selectable <32.768 kHz, 1024 Hz, 32 Hz, 1 Hz> Month / Century Years / INT Minutes Alarm CONTROL Hour Alarm LOGIC 2 SCL SDA • The various interrupt function Day Alarm I C-BUS •Timer function can be set up between 1/4096 second and 255 minutes. • Alarm function can be set to any combination of day of week, hour, or minute. Weekday Alarm INTERFACE CLKOUT frequency ADDRESS Timer Control REGISTER POR 0F Timer ∗ Functions are compatible with RX-8564 LC series. Terminal connection / External dimensions Serial clock input pin. Bi-directional Data input and output pin. CLKOUT Output 32.768 kHz clock output pin with the output control function. (C-MOS) CLKOE pin control the condition of CLKOUT with FE-bit, etc. CLKOE pin input CLKOE HIGH Input LOW FE bit 1 0 1 0 Interrupt output CLKOUT pin output Output ( C-MOS ) OFF ( LOW ) OFF ( LOW ) OFF ( LOW ) /INT Output ( N-ch open drain ) VDD - Connected to a positive power supply. GND - Connected to a ground. 1. N.C. 2. N.C. 3. CLKOE 4. VDD 5. CLKOUT 6. SCL 7. SDA 8. ( GND ) 9. GND 10. / INT 5.4 1.5 Max. 6.0 ± 0.2 RTC − 8564 NB 20. N.C. 1. / INT 19. N.C. 2. GND 22. 18. N.C. 3. ( GND ) 17. N.C. 4. N.C. 16. N.C. 5. SDA 15. N.C. 0.5 SDA RTC − 8564 JE Function Input 7.0 ± 0.3 SCL 0.65 Signal Name Input/Output (Unit׃mm) 6. SCL 7. CLKOUT 8. VDD 9. CLKOE 14. N.C. 13. N.C. 12. N.C. 10. N.C. 11. N.C. 11. N.C. 6.3 Max. Pin Function 4.8 1.3 ± 0.1 5.0 ± 0.2 VSOJ − 20 pin N.C. 21. N.C. 20. N.C. 19. N.C. 18. N.C. 17. N.C. 16. N.C. 15. N.C. 14. N.C. 13. − 12. − SON − 22 pin Metal may be exposed on the top or bottom of this product. This will not affect any quality , reliability or electrical spec. Specifications (characteristics) ∗ Refer to application manual for details. ! Current consumption characteristics ! Recommended Operating Conditions Item Power voltage Clock voltage Operating temperature Symbol VDD VCLK Condition - Min. 1.8 VLOW Typ. 3.0 3.0 Max. 5.5 5.5 Unit V V TOPR - -40 +25 +85 °C Item IBK ! Low voltage detection Item Low voltage detection Symbol VLOW Condition Ta = -20 °C ∼ +70 °C Ta = -40 °C ∼ +85 °C Typ. 0.9 0.9 Max. 1.0 1.1 Unit V V ! Frequency characteristics Item Frequency tolerance Symbol ∆f/f Symbol Condition = +25 °C DD V = 3.0 V Ta Rating 5 ± 23 * Unit × 10−6 * Please ask for tighter tolerance. (Equivalent to 1 minute of monthly deviation) http://www.epsontoyocom.co.jp Typ. Max. 330 800 fSCL = 0 Hz CLKOE = GND CLKOUT ; VDD =3V 275 700 VDD =5V 2.5 3.4 32.768 kHz output ON VDD (Output=OPEN ; =3V CL = 0 pF) 1.5 2.2 fSCL = 0 Hz CLKOE = VDD I32k Min. VDD output OFF ( LOW ) Current Consumtion Ta = −40 °C to +85 °C Condition =5V Unit nA µA CLKOUT ;