Catalog Number:
Date:
Project:
OVERVIEW
The xCella Wireless Remote Module is a cost-effective wireless load controller designed to
install quickly and reduce costs. Using robust distributed intelligence supported by RDT
wireless technology, this intelligent relay delivers reliable wireless communication and can be
installed directly onto a fixture or junction box for branch circuit control.
Available as either a switching or (0-10V) dimming relay, xCella Remote Modules also
feature various inputs and outputs to allow it to connect with low-voltage occupancy sensors,
photosensors and alarm systems. When used with an xCella Wireless Gateway, Remote
Modules may also be controlled by any GR 2400 Digital Time Clock (DTC).
xCella™ Wireless
Remote Modules
Featuring Pair & Play™ technology, xCella Remote Modules provide fast installation and
setup and are paired with wall stations and sensors in seconds using a single button. Remote
Modules then intelligently adjust the sequence of operations automatically based on the
other devices paired in the room.
FEATURES
• Pair and Play technology for fast setup
• Push button programming and intelligent sequence of operations
• 90 ft. maximum indoor range
• Distributed intelligence communication supported by RDT protocol
• Optional dry contact inputs for occupancy sensors, photosensors, and alarm system
• Optional dry contact output
Warranty
Three-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
ORDERING INFORMATION
XCR RM
System Type
XCR RM
Wireless Remote Module
Relay Type
RL1 SNI Remote Module single pole relay
RL1 DNI Remote Module single pole 0-10V dimming relay
RL1 DIO Remote Module single pole 0-10V dimming relay
w/Photocell and CCI and CCO
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/31/15
Voltage
Blank
120 - 277 VAC
347
47 VAC
XCELLA_WIRELESS_REMOTE_MODULES
1 of 2
OVERVIEW
Wireless
Occupancy
Sensor
Wireless
Rocker
Switch
GR 1418 LT
(master panel)
MicroPanel-4
(remote panel)
Wireless
Photosensor
Chelsea
DigitalSwitch
xCella
Gateway
xCella Remote
Module
To next GR 2400 device
To next GR 2400 device
SEE MANUAL FOR MULTI-FUNCTION
Normally Closed Contact
Common
Normally Open Contact
Alarm Input
TM
BUTTON OPERATION
A
WIRE LEGEND
BLACK---------- LINE
YELLOW ----- LOAD
WHITE --------NEUT
VIOLET------- 0-10V
GRAY ---------- COM
xCella
Contains / Contient:
FCC ID: SZV-STM300U
IC: 5713A-STM300U
CAT NO.: XP-D-RF
30A 277VAC HID BALLAST
20A 120VAC TUNGSTEN
DO NOT USE IF DROPPED.
NO USER SERVICEABLE PARTS INSIDE.
WARRANTY VOID IF OPENED.
WIRELESS
XCR RM RL1 DIO
30GT
E227507
ENCLOSED ENERGY MANAGEMENT EQUIPMENT
White: Neutral
Black: Line
Yellow: Load
Violet: 0-10V
Grey: DC Common
Ground
Photosensor
Occupancy Sensor
14 VDC
B
Title 24 System Component
SPECIFICATIONS
Dimensions: 2.53" w x 3.38" h x 1.83" d (not including 1/2" chase nipple)
Mounting: 1/2" knockout (KO)
Relay: 30A 277VAC Ballast
20A 120V Incandescent
20A 347VAC Ballast
1.5hp at 120VAC
3hp at 277VAC
0-10V sink current: Up to 15mA
Power supply inputs: 120 - 277VAC, 347VAC
Max. humidity: 10–90% non-condensing
Ambient temperature: 32–120° F (0–50° C)
Wireless protocol: RDT (902 MHz)
RF transmission output
power:10mW
Certifications: FCC ID: SZV-STM300U
IC: 5713A-STM300U
Listings:UL and cUL listed
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com
© 2014-2015 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/31/15
XCELLA_WIRELESS_REMOTE_MODULES
2 of 2