Exterior Die-Cast Compact Fluorescent Step Light

IFS70
JOB NAME
CATALOG NUMBER
Exterior Die-Cast Compact Fluorescent Step Light
NOTES
TYPE
9”
4 1/8”
3 1/2”
WET
-G: Louver
LOCATION
9 11/16”
4 1/8”
-AG: Angled Louver
-ED: Etched Glass
Order Matrix | Example: IFS7026EB-ED
A
B
A
IFS70
B
13
18
26
C
E
E-27
C
Series
Step Light Compact Fluorescent
Lamp
13W DTT
18W DTT
26W DTT
Ballast
Electronic 120V
Electronic 277V
D
E
D
DESCRIPTION
The IFS70 series is a die-cast aluminum housing step light with three optional faceplates
for wall mount applications indoors and outdoors. The step light provides safe pathway
illumination mounted to concrete or block walls, with a recessed low profile design.
Finish
B Black
SV Silver 1
W White 1
SU Surface™
E
F
2
Face Plate
-G Louver
-AG Angled Louver
-ED Etched Glass
F
FEATURES
--Thermal protection integral to ballast
--Integral brackets for installation hardware
--Heavy duty, low profile aesthetic louver trim included
Accessories
-BR Bracket and Hanger Bar for
Wood Joist
Notes:
1. Consult factory for silver or white finishes.
2. See Surface™ simulated natural finishes submittal sheet for specification.
LAMP
(1) 13/18/26W DTT 4-Pin
FACE PLATE
The faceplate is available in louver, angled louver, or etched glass, each faceplate is
constructed from heavy duty casted aluminum. Faceplates are available in a black, silver 1
or white 1 powder coat finish. Surface™ simulated finishes available, see submittal sheet.
HOUSING
The housing is constructed of die-cast aluminum with less than .3% copper to prevent
corrosion. The housing comes standard with two 1/2” horizontal knockouts to accept the
power feed. Housing comes standard with captive painted stainless steel fasteners and a
molded silicone gasket.
MOUNTING
Recessed wall mounted step light has bracket plates on the front of the housing allowing
the bracket and housing to be secured to joists. Optional bracket and bar hangers can be
ordered for installation. Specify -BR. Fixture is rated for indoor and outdoor applications,
insulation must be kept 3” away from all sides of the fixture.
SURFACE™ SIMULATED NATURAL FINISHES
--Available in 8 standard wood grain powder coated finishes
--Consult factory
LISTING
ETL Listed to US and Canadian standards for wet locations
STEP LIGHTING L/M-048:16 P-2
Intense Lighting
3340 E La Palma Ave, Anaheim, CA 92806 | tel 714 630-9877 | fax 714 630-9883
©2016 Intense Lighting, LLC. All rights reserved. Subject to change without notice.