Dimensions (Unit: mm):
D ESCRIPTION
Infinova’s V1412 series is a die-cast weatherproof housing for outdoor installations. The internal dimensions make it suitable for large cameras equipped with a wide range of lenses. The body is made of extruded aluminum and the end-cover plates are made of die-cast aluminum.
Weatherproof features are ensured by the extruded aluminum sunshield, the
EPDM-rubber end-gasket between the end-cover plates and the body, and three cable glands with their specific gaskets. Installation and adjustments of the camera are made easy due to the ability to remove the body, leaving the internal slide in working position for easy operation.
A wide range of accessories are available, including a heater kit, a blower kit, a camera power supply, a wiper and accessories are supplied as a simply plug-in kit for an easy installation.
The housing can be utilized for a variety of applications, such as traffic and highway monitoring.
F EATURES y Indoor/Outdoor installations y Built-in aluminum and epoxy powder painted y Accommodate large lenses y Wide range of accessories available y Solid and reliable y Weatherproof Standard IP66
S PECIFICATIONS
General
Structure: Die-cast aluminum back and front cover plates
Extruded aluminum body for the internal slide
Epoxy polyester powder paint
Stainless steel external screws
Environment:
Environmental Rating: IP66
Electrical
Input Voltage: 24 VAC consumption 20 W (maximum)
O RDERING INFORMATION
V1412-14SH-C Camera housing, indoor/outdoor, 14 inch internal, sunshield, heater (12 VDC / 24
VAC), 3+1 and 6+1 poles connectors and
1 BNC complete with prewired cable for video input
V1412-14SHX-C Camera housing, indoor/outdoor, 14 inch internal, sunshield, heater (110 ~ 230 VAC),
3+1 and 6+1 poles connectors and 1 BNC complete with prewired cable for video input
V1412-18SH-C Camera housing, indoor/outdoor, 18 inch internal, sunshield, heater (12 VDC / 24
VAC), 3+1 and 6+1 poles connectors and
1 BNC complete with prewired cable for video input
V1412-18SHX-C Camera housing, indoor/outdoor, 18 inch internal, sunshield, heater (110 ~ 230 VAC),
3+1 and 6+1 poles connectors and 1 BNC complete with prewired cable for video input
A CCESSORIES
V1412-BK2 Blower kit for housing V1412, includes power supply (110 ~ 230 VAC to 12VDC)
V1412-W1
V1412-W2
V1412-WP1-T5
Wiper kit for housing V1412, 24 VAC
Wiper kit for housing V1412, 230 VAC
Washer pump 24VAC and 5 liters
(1 gallon) tank
V1412-WP2-T5 Washer pump 230VAC and 5 liters
(1 gallon) tank
230 VAC consumption 40 W (maximum)
Temperature Controlling
Heater:
Blower With Air Filter and
Thermostat:
Mechanical
Turns on at 1
Turns off at
Turns off at
5° C ±
2
Turns on off at 35
2
3
2° C ±
2° C ±
° C (
3
° C ±
3
3
59
° C (
° C (
71
° C (
71
° F);
° F)
95 ° F);
° F)
Operating Temperature: -4 ° F to +122° F ( -2 0° C to +50° C) w/heater
Glass Window (WXH): 3.7” X 3.1” (94 mm X 80 mm)
Internal usable dimensions: 14 X 5.2 X 3.4 inches (LxWxH)
358 X 134 X 88 mm (LxWxH)
External dimensions: 23.2” X 6.9” X 6.6” (LxWxH)
590 X 175 X 168 mm (LxWxH)
Infinova · 51 Stouts Lane, Monmouth Junction, NJ 08852 USA · www.infinova.com · Toll-free US: 1-888-685-2002 · Tel: 1-732-355-9100 · Fax: 1-732-355-9101 · E-mail: sales@infinova.com
Specifications and appearance are subject to change without notice. 9/19/2006