SPECIFICATIONS
LIGHTPLANE 15
LP15 | Suspended
Find additional images and information at
alwusa.com/lp15
LIGHTPLANE 15 - LP15
Suspended
SPECIFICATIONS
1. BASE MODEL
LP15
Page 2 of 7
Suspended
Type:
LP15
2. RUN LENGTH/
SIZE
___
___
Individual (1', 2’, 3’, 4’, 5', 6’, 7’ or 8’)
Continuous row or Configuration2 (enter total linear length, ex: 20’)
All lengths are nominal and may vary based on lamping and other
specfication selections. Consult factory when exact lengths are required.
3. INDIRECT
CHANNEL
OPTION
2
J
I13
3
I2
No indirect uplight
Indirect uplight in one channel
Indirect uplight in two channels
A configuration is a custom shape (rectangle square, L, etc.) with mitered corners.
Must choose quantity of mitered corners in Additional Options.
3
4. LAMPING –
PRIMARY/
INDIRECT
When LED lamping is specified, channel comes with integral clear dust guard
NONENone. Select when specifying only Accent Downlight
LED4
LOW5
MED
HI 5
TUNE 6
DECOR
RGB
Pair lamping with CCT (where applicable), ex: MED/2700K
Low-output, high-performance LED – 1608 delivered lm/ft, 15.5 W/lf, 103 lm/W
2700K
3000K
3500K
4000K
Medium-output, high performance LED – 2144 delivered lm/ft, 20.7 W/lf, 103 lm/W
2700K
3000K
3500K
4000K
High-output, high-performance LED – 2680 delivered lm/ft, 25.8 W/lf, 103 lm/W
2700K
3000K
3500K
4000K
Tunable white LED, 2700K-5700K – 1787 delivered lumens, 17.2 W/lf, 103 lm/W
(must select DMX driver below; controller not included)
Decorative constant voltage LED, 715 delivered lm/ft, 8.8 W/lf, 81 lm/W
3000K
3500K
4000K
Color-changing RGB LED, 5 W/lf
(must select DMX driver below; controller not included)
4
LED board options may be limited and/or subsituted to accomodate requests
for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory.
5
Performance calculations are extrapolated estimates based on the actual
IES test results of an I2 double channel unit using LOW LEDs at 3500K.
For single channel perfomance see separate LP2 IES photometrics
6
Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs
based on of an I2 double channel unit using LOW LEDs at 3500K. Cooler and warmer
CCT settings will provide lower delivered lumens, lower lm/W and higher W/lf.
For single channel perfomance see separate LP2 IES photometrics
FLUORESCENT
1T5
1T5HO
Lamps not provided
Standard output, T5
High output, T5
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 15 - LP15
Suspended
SPECIFICATIONS
5. DRIVER –
PRIMARY/
INDIRECT
NONE
Page 3 of 7
None. Select when specifying only Accent Downlight
LED
0/10V/
0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
10% Standard dimming to 10%
DALI
DMX
HILUME/A3
DALI dimming to 0%
DMX dimming to 0%
Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
1% Dimming to 1%
0% Premium dimming to 0%
FLUORESCENT
HILUME/A3
Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
STD
Standard, non-dimming, <10% THD
FL/0/10V
Dimming, 0-10V
HILUME Lutron Hi-Lume® dimming
BALLASTARStep-dimming
Driver/ballast options may be limited with 347 voltage. Consult factory.
Driver/ballast specifications provided upon request to assist with control system integration
Consult ballast manufacturer for lamp compatibility
6. ACCENT
DOWNLIGHT
NONE
None. Select when specifying only Indirect Lamping
MR16/LED
GU5.3 base for retrofitting with MR16 LED (lamps not included)
Lamp transformer and compatibility shall be checked by others.
ALW will provide transformer information on submittal drawings.
CZEN800
CZEN1000 CZEN12007 CZEN15007
CZEN26007
CZEN41007
LED COB downlight, 9.5 W, 790 lm, 40° beam, 3000K
LED COB downlight, 12.7 W 1040 lm, 40° beam, 3000K
LED COB downlight, 15 W 1275 lm, 60° beam, 3000K
LED COB downlight, 21 W 1550 lm, 60° beam, 3000K
LED COB downlight, 27.6 W 2620lm, 60° beam, 3000K
LED COB downlight, 51W 4090lm, 60° beam, 3000K
7
Standard with solite lens, no additional Accessory Options availalbe
lm = raw lumens; Watts include driver loss
PAR20
PAR30
AR111
BLANK
Retrofit PAR 20 Module for Halogen OR LED retrofit lamps
Retrofit PAR 30 Module for Halogen OR LED retrofit lamps
Retrofit AR11 Module for Halogen OR LED retrofit lamps
10x12 blank filler panel
ADDITIONAL DOWNLIGHT OPTIONS NEXT PAGE
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 15 - LP15
Suspended
SPECIFICATIONS
MULTIPLEX CONFIGURABLE OPTIONS2
MPCZEN1200 8 MULTIPLEX LED COB, 15 W 1275 lm
3000K
MPCZEN1500 8
MULTIPLEX LED COB, 21 W 1550 lm
3500K
3500K
Page 4 of 7
Pair lamping with CCT (where applicable),
ex: MPCZEN1200/3000K
4000K
3000K
MPCZEN2600 8
MULTIPLEX LED COB 27.6 W 2620lm
4000K
3000K 3500K 4000K
Select COOLING Option: A Active Cooling (Fan) / P Passive Cooling (Add'l heat sink)
MPXSM80-900 8
MULTIPLEX LED Xicato Module, 13.5W 930lm
3000K
3500K
4000K
MPXSM80-1400 8 MULTIPLEX LED Xicato Module, 22.9W 1420lm
3000K
3500K
4000K
MPXSM80-2200 8 MULTIPLEX LED Xicato Module, 34W 2220lm
3000K 3500K 4000K
Select COOLING Option: A Active Cooling (Fan) / P Passive Cooling (Add'l heat sink)
MPXSM95-700 8
MULTIPLEX LED Xicato Artist Series Module, 95 CRI 16W 700lm
3000K
MPXSM95-900 8
MULTIPLEX LED Xicato Artist Series Module, 95 CRI 21W 930lm
3500K
3000K
3500K
4000K
4000K
MPXSM95-1400 8 MULTIPLEX LED Xicato Artist Series Module, 95 CRI 32.5W 1420lm
3000K
3500K
4000K
lm = raw lumens; Watts include driver loss
7
Standard with solite lens, no additional Accessory Options avaialbe
Configurable multiplexmodule; select color and Accessory Options
8
6A. MPLEX-OPTICS
Leave blank if MPLEX is not selected
R
Reflector
L
Lens
20DEG
OR
7. DRIVER –
ACCENT
DOWNLIGHT
20DEG
NONE LED
0/10V/
40DEG
60DEG
40DEG
60DEG
None. Select when specifying only Indirect Lamping
0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
10% Standard dimming to 10%
DALI
DMX
HILUME/A3
DALI dimming to 0%
DMX dimming to 0%
Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
1% Dimming to 1%
0% Premium dimming to 0%
FLUORESCENT
HILUME/A3
Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
STD
Standard, non-dimming, <10% THD
FL/0/10V
Dimming, 0-10V
HILUME Lutron Hi-Lume® dimming
BALLASTARStep-dimming
Driver/ballast options may be limited with 347 voltage. Consult factory.
Driver/ballast specifications provided upon request to assist with control system integration
Consult ballast manufacturer for lamp compatibility
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 15 - LP15
Suspended
SPECIFICATIONS
8. QUANTITY – ACCENT
DOWNLIGHT
NONE
Page 5 of 7
None. Select when specifying only Indirect Lamping
___
Enter quantity 9
___
REPEAT SECTIONS 6 AND 7 TO SELECT MULTIPLE TYPES OF ACCENT DOWNLIGHTS
9
Limitations exist with qty of downlights fitting within Lengths specified. Contact factory for details.
9. ACCESSORY –
ACCENT DOWNLIGHT
NONE LSS10
SOL10,11
HEX11
SNT11
None
Linear spread lens
Solite lens
Hexcell louver
Snoot
LINEAR
SPREAD LENS
SOLITE LENS
HEXCELL
LOUVER
SNOOT
Select one accessory type only. For different accessories on different downlights, contact factory.
10
Not Available in CZEN1200, CZEN1500, CZEN2600, or CZEN4100
Standard in CZEN800, CZEN1000, CZEN1200, CZEN1500, CZEN2600, CZEN4100 11
10. FINISH
AL
BK WH
RAL/ ___ Standard, natural “Ultimatte” aluminum
Black powdercoat
White powdercoat
Specify RAL powdercoat code (ex: #RAL/3003)
11. VOLTAGE
12012
27713
UNV
34714
120 volt
277 volt
Universal voltage
347 volt
12
For MR16/LED dimming, consult LED retrofit lamp manufacturer for voltage dimmer compatibility
Dimming with 277 volt not recommended for LED retrofit lamps. For dimming with CZEN800
or CZEN1000 lamps using 277 volt, HILUME/A3 or 0/10V/0 driver must be specified.
14
Driver/ballast options may be limited with 347 voltage. Consult factory.
13
12. ADDITIONAL
OPTIONS
NONE
COMBO
EMC/___15
EMB/___15,16
OS/___16
PH___16
MC/___
SB
None
Combination 4.5" canopies at feed locations with both
power feed and suspension mounting hardware
Emergency circuit (indicate total quantity, ex: EMC/4)
Emergency battery pack (indicate total quantity, ex: EMB/4)
Occupancy sensor (indicate total quantity, ex: OS/4)
Photocell/daylight sensor (indicate total quantity, ex: PH/4)
Mitered corners (indicate total quantity, ex: MC/4 for a rectangle)
Seismic bracing
15
16
Consult factory for available options
Limitations exist depending on size and specification. Consult factory for options and details
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 15- LP15
Suspended
SPECIFICATIONS
DIMENSIONS
Page 6 of 7
5
14 8"
SUSPENDED (LP15)
12"
12"W X 10"L MODULE SITS
BETWEEN CHANNELS
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n
LIGHTPLANE 15- LP15
Suspended
SPECIFICATIONS
HOUSING
Page 7 of 7
100% recyclable, extruded architectural grade
T6061 aluminum with .08" minimum wall thickness.
ELECTRICAL
Fluorescent ballasts are <10% THD Class P.
Programmed-start standard. LED drivers
are Class 2. L80 >50,000 hours. 80+ CRI.
ETL listed for damp location with lens.
EMERGENCY
Luminaires can be wired for emergency circuit
and/or emergency battery backup. Consult factory
for details.
SUSPENSION HARDWARE
CEILING HARDWARE
COMBO CANOPY
(1) 4.5" canopy per
power feed location,
(1) bullet mount, (1) 8'
aircraft cable and (1)
2" canopy (for use with
T-bar mounting) per
suspension point
Choose option
COMBO to specfiy
4.5" canopies at feed
locations with power
feed and aircraft cable
suspension mounting
FINISH
Standard finish is "Ultimatte" aluminum — a smooth,
clean and durable finish achieved from a deep-etch
and two-step clear anodizing process. White, black
and color RAL powdercoat options also available.
OPTIONS
Eye Bolt
(By Others)
Gripper
w/Hook
2-Cable
Clamp
ALUMINUM – AL
WHITE – WH
BLACK – BK
COLOR – RAL
Aircraft
Cable
SEISMIC BRACING
MITERED CORNERS
Add-on hardward
includes cable gripper
with hook, 2-cable
clamp and specified
length of aircraft cable
per suspension point
Consult factory
for mitered corner
angle options
© 2015 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website.
A
30984 Santana Street
n
Hayward, CA 94544
P
510 489 2530
n
n
E
TalkToUs@alwusa com
n
W
alwusa com
n