SMALL WALL MOUNT SS1 • Fluorescent - Winona Lighting

Project: _________________________________________ Qty: ___________
Type:
Surface Wall
SMALL WALL MOUNT SS1 • Fluorescent
0°
13
45°
3/4" (19mm)
@
.P.
XC
MA
6-7/16"
(163mm)
5-1/8"
(130mm)
3-15/16"
(100mm)
6-1/2" (166mm)
10-3/8" (264mm)
SS1 Small Simple Yoke Mount
MOUNTING- All standard mounts are fully adjustable and lockable. Designed for remote
or integral ballast. See Mounting Details above.
TYPE- Small profile with smooth detail.
Indoor; Non-gasketed, captive extruded aluminum hinge for lens and baffle options.
Lens; Open aperture is standard for indoor fixtures.
PERFORMANCE- Asymmetric distribution provides a concentration of light on target
surface for smooth illumination. Maximum candlepower aimed 130° above nadir has
less than 15% spill light within the 0-130° zone and less than 3% spill light within the
180-270° zone.
ELECTRICAL- Electronic, HPF ballast, lamp protection circuit, and thermally protected.
Provide 90°C supply wire.
PROFILE- P1 (basic): Anodized, extruded aluminum specular reflector with solid
aluminum endcaps and stainless steel hardware. Extruded aluminum optional glare
control visors are combined with P1 basic profile to create P2, P3, and P5 profiles.
FINISHES- 6 stage pre-treated polyester powder coat painted finish. All hardware is
stainless steel.
Warranty
1-year limited warranty. Complete warranty terms located at www.acuitybrands.com/
CustomerResources/Terms_and_conditions.aspx
Actual performance may differ as a result of end-user environment and application.
Ordering Information
EXAMPLE: SS1 INT 12LONG SS 1/26DTT 120 P1 SGW
SS1
SS
Series
SS1
Small Simple Yoke
Surface Wall Series
Environment
Length
Reflector Type
Source
INT Interior
12LONG 12 inch nominal length
SS Small
Smooth
1/26DTT
Internal Shielding
External Shielding
Visor
Lens
PBB Parabolic Blade Baffle
SBB Straight Blade Baffle
P1
P2
P3
P5
CA
MP
Basic
Solid
Perforated
Short
Voltage
( 1 ) 26W Quad Tube/ G24q3
120
277
347*
Emergency
120 volt
277 volt
347 volt
Finish
Clear Acrylic
Micro-Prismatic Glass
ABP
ALP
CPF*
LGP
LSP
MBP
EMBR Emergency Ballast
Remote Mount
Special
Antique Brass
Aluminum ( Matte )
Custom Paint Finish
Light Gold Iridescent
Light Silver
Medium Bronze
PBP
PEW
PGP
SGB
SGW
Pale Bronze
Pewter
Pale Gold
Semi Gloss Black
Semi-gloss white
MOD*
Modification / Consult Factory
*Available by modification only, consult factory
Visit www.winonalighting.com for the most complete and current information.
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein
may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
All fixtures UL listed, USA and Canada
Rev. 03/19/15
SS1_FL
1
Fluorescent • Ballast Data Sheet
Damp / Dry Location
Ballast Specifications (Remote or Integral)
Remote Ballast Data
Catalog #
(lamp code)
Lamp
Description
Base
THD
Min Start
Temp
Ballast
Type
Dimensions
X
Max Distance from
Lamp to Ballast
CFQ26
CFM132
CFM232
CFM142
CFM242
CFM157
CFM257*
CFM170
CFM270*
FT139
FT239
FT140
FT240
FT150
FT250
FT155
FT255
1__T8
2__T8
1__T5
2__T5
3__T5*
4__T5*
1__T5HO
2__T5HO
3__T5HO*
4__T5HO*
(1)26W QUAD
(1)32W HEX
(2)32W HEX
(1)42W HEX
(2)42W HEX
(1)57W HEX
(2)57W HEX
(1)70W QUAD BX
(2)70W QUAD BX
(1)39W TWIN
(2)39W TWIN
(1)40W TWIN
(2)40W TWIN
(1)50W TWIN
(2)50W TWIN
(1)55W TWIN
(2)55W TWIN
(1)17 - 70W T8
(2)21 - 32W T8
(1)14 - 35W T5
(2)14 - 35W T5
(3)14 - 35W T5
(4)21 - 28W T5
(1)24 - 80W T5
(2)24 - 80W T5
(3)24 - 80W T5
(4)39 - 54W T5
GX24Q-3
GX24Q-3
GX24Q-3
GX24Q-4
GX24Q-4
GX24Q-5
GX24Q-5
GX24Q-6
GX24Q-6
2G11
2G11
2G11
2G11
2G11
2G11
2G11
2G11
Med. Bi-Pin
Med. Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
6.75
6.75
6.75
6.75
6.75
6.75
11.5
6.75
11.5
6.75
11.5
11.5
11.5
19
19
19
19
19
19
19
19
19
19
19
19
19
19
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
Access Cover
2"
X
3-1/4"
* Requires Two Ballasts
Wet Location
Ballast Specifications (Remote or Integral)
Catalog #
(lamp code)
Lamp
Description
CFQ26
(1)26W QUAD
CFM132
(1)32W HEX
CFM232
(2)32W HEX
CFM142
(1)42W HEX
CFM242
(2)42W HEX
CFM157
(1)57W HEX
CFM257*
(2)57W HEX
CFM170
(1)70W QUAD BX
CFM270*
(2)70W QUAD BX
FT139
(1)39W TWIN
FT239
(2)39W TWIN
FT140
(1)40W TWIN
FT240
(2)40W TWIN
FT150
(1)50W TWIN
FT250
(2)50W TWIN
FT155
(1)55W TWIN
FT255
(2)55W TWIN
1__T8
(1)17 - 70W T8
2__T8
(2)21 - 32W T8
1__T5
(1)14 - 35W T5
2__T5
(2)14 - 35W T5
3__T5*
(3)14 - 35W T5
4__T5*
(4)21 - 28W T5
1__T5HO
(1)24 - 80W T5
2__T5HO
(2)24 - 80W T5
3__T5HO*
(3)24 - 80W T5
4__T5HO*
(4)39 - 54W T5
* Requires Two Ballasts
Remote Ballast Data
Base
THD
Min Start
Temp
Ballast
Type
Figure
Max Distance from
Lamp to Ballast
GX24Q-3
GX24Q-3
GX24Q-3
GX24Q-4
GX24Q-4
GX24Q-5
GX24Q-5
GX24Q-6
GX24Q-6
2G11
2G11
2G11
2G11
2G11
2G11
2G11
2G11
Med. Bi-Pin
Med. Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
Mini Bi-Pin
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
<10%
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
0ºF (-18ºC)
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
Electronic
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
18' #18 Wire
OVERALL NOTES:
1. When installing more than one ballast in a common area, a minimum 12" spacing
between ballast enclosures.
More space may be required dependent on ambient temperature within environment.
2. Provide ventilation in the area where ballasts are installed.
3.
4.
5.
6.
Figure A
4"
Access Cover
8"
8"
Figure B
Access Cover
4"
24"
4"
Mount away from heat generating devices and ductwork.
Use 90ºC rated wire for supply connections.
A separate 1/2" metal conduit must be used between each fixture and remote ballast.
Knock-out locations may vary from those shown above.
Winona Lighting • 3760 West Fourth Street • Winona, MN 55987 • 800.328.5291 • www.winonalighting.com
© 2015 Acuity Brands Lighting, Inc. All Rights Reserved. “Winona” is a registered trademark of Acuity Brands Lighting. Products herein
may be covered by one or more U.S. Patents and Patents Pending. Specifications subject to change without notice.
Rev. 03/19/15
SS1_FL
2