Universal electric infrared heater - Fiore | MO-EL
The Fiore is an inexpensive alternative to traditional fuel based heaters, which uses
infrared energy to provide immediate heat anywhere it’s desired. Certified IP65 can
be used Outdoor as well as Indoor. Composed of an infrared (IR-A) short waves
source surrounded by a parabolic reflector it focuses heat where desired avoiding
waste of energy.
Benefits
Painted in silver colour the Fiore confirms its advanced Italian design
Low maintenance
Aluminum parabolic reflector specifically designed to maximize the heat diffusion
in a wider area
No waste of energy even in windy places
IR-A rays heat immediately and farther than other infrared sources
characterized by different waves length (within 1 second reaches 90% of its
heating energy)
Accessories for wall and ceiling installation
100% efficiency: No dispersion of rays absorbed by glass shield
IP65 safety rated: Totally protected against dust and protected against low
pressure jets of water from all directions
Multiple applications: Balconies, Terraces, Shops, Garages, etc
Comfortable, gentle, quiet heat. No blast of air or dust
Environmentally friendly : No pollution from the use of fossil fuel
Compact elegant design blends in any environment
Durable aluminum and stainless steel construction. Will not rust or corrode
MAXIMUM HEATING POWER
Produced specifically for large spaces requiring immediate heat.
FIORE INFRARED HEATERS CAN BE ORDERED WITH LOW GLARE LAMPS
WHAT IS A LOW GLARE LAMP?
Low glare lamp does not have standard lamp brightness, it provides a comfortable warmth. It does not emit irritating bright
light, no dazzling, no glaring, does not irritate the eyes. Infrared heaters with low glare lamps extremely suitable for use in
bars, cafes, restaurants, where you need to create a cozy and comfortable atmosphere. It's great for offices and other places
where staff spends on the computer most of the day and their eyes are sensitive to bright light.
SIMPLE DESIGN
Fiore infrared heaters system design is simple, application possibilities is wide, and accessories can be ordered separately. The
heater can be used both indoors and outdoors.
Firoe infrared heaters accessories:
Chains for ceiling mounting
Wall mounting bracket
pdfcrowd.com
Vertical bracket for mounting on a pole or a special tripod stand
Tripod stand (used with vertical bracket)
More detailed information with pictures available in Mounting options section.
SIGNIFICANT SAVINGS WITHOUT GAS!
Works without using any type of gas. Warms immediately, focusing the heat only where it is needed, with lower usage costs
than those of other heat sources.
HIGH EFFICIENCY AND COMPLETE SAFETY
The lack of front glass enables the appliance to reach high efficiency (15% more yield). It has been designed to be completely
insulated and impermeable to dust and jets of water (IP65).
UNIVERSALITY AND VERSATILITY
By means of the optional accessories,
Fiore can be used in different locations,
both outdoor and indoor.
Models specifications
Fiore - universal heater
Fiore 766
1200 W power, heating area 4-6 m², length 71.2 cm, 2 year WARRANTY
Fiore 767
1760 W power, heating area 8-10 m², length 83.5 cm, 2 year WARRANTY
Mounting options
The Fiore eange of infrared heaters is deliberately designed to be very flexible in the choice of position. There are three basic
pdfcrowd.com
options:
A wall mounting bracket version with a specifically designed fitting for wall attachment
Before drill the holes for the dowels, be sure that the wall is solid and that you are far
from water tubes or electrical wires. For fixing the appliance at the wall, drill four holes
with a 5 mm diameter bit and fix the wall bracket with the dowels and screws that you
find in the box.
Recommended to use in bathrooms, terraces and other internal spaces.
A chain suspended version
pdfcrowd.com
It allows to mount heater to the ceiling and heat objects below.
Recommended to use in porches, gazebos, outside stands.
Pole or special stand mounting version
Pole diameter should be 20-60 mm.
Recomended to use in building sites, sporting events, open
spaces.
Minimum clearance distances to combustible surfaces
pdfcrowd.com
Technical data
Model
Heating capacity
W
766
767
1200
1760
Power supply
230V 1 phase 50-60Hz
Cable
H05RN-F (3x1x3m)
Switch
Yes
IR lamps
Tungsten halogen lamp filled with inert gas
Lamp life
h
m2
Heated area
5000
4-6
8 - 10
Protection level
IP65
Insulating class
I
Emission spectrum
Dimensions
Weight
IR-A
length
mm
width
mm
112
height
mm
83
kg
712
0,95
835
1,0
Gallery, installation examples
Fiore infrared heaters installed abroad
1/16
pdfcrowd.com
pdfcrowd.com