CAT. 0119-GB
▲
Check Valves
UNI EN ISO 9001
Cert. n° 2905
ISO/TS 16949
▲
Check Valves
• Check valves are used as a safety
device in hydraulic systems.
• Specifically designed to be
mounted in hydraulic plants
whenever it is necessary to
shut-off the line at the preset
crack pressure.
• Characterized by a special valve
with elastomeric seal in NBR
(Nitrile Rubber) to guarantee an
excellent sealing action under
every working condition.
• Standard versions are assembled
with a spring set to open the valve
at a pressure of 35 kPa (5 PSI).
• Other settings are available up to
950 kPa (138 PSI) and also kits to
update the crack pressure.
• Check valves VUC series have a
special valve with metal sealing
extremely resistant and compact.
Benefits
• Standard crack pressure 35 kPa
(5 PSI).
• Other settings available up to
950 kPa (138 PSI).
• Available with female threads,
male threads and in compact
version.
• Valve seal in NBR Nitrile Rubber
(VU series) for a total sealing.
• Metal sealing valve (VUC series).
• Available in AISI 316 Stainless
Steel.
• Available VU... S Series throated
check valves.
• Update kits available to modify
the crack pressure.
▲
2
Applications
▲
• Check valves for hydraulic
systems.
• Valve seal in NBR Nitrile Rubber
(VU series).
• Available with female threads,
male threads and in compact
version.
• Standard crack pressure 35 kPa
(5 PSI).
• Other settings available
up to 950 kPa (138 PSI).
• Available in AISI 316 Stainless
Steel.
• VU...S Series (throated check
valves) designed to guarantee a
minimum calibrated flow in one
direction by purposely dimensioned
orifices.
▲
▲
Features
Recommendations
• Improper use and incorrect
maintenance of products with
high internal working pressures
could cause malfunctioning
and damage to persons
and machines.
Therefore it is necessary to
carefully conform to the simple
instructions contained in this
catalogue.
For any further information please
contact FASTER Research &
Development Dept.
• Before using a new check valve
please carefully check all data
reported in our catalogues.
• Make sure it is suitable for
pressure and flow characteristics
requested by the applications.
• Verify that threads fit and that their
sealing is correct.
• If necessary replace damaged
components with FASTER®
original spare parts.
• The recommendations stated
in this catalogue do not consider
all risk factors in every possible
application of FASTER® couplings.
• The final choice of the product is
under customer’s responsibility
who has to make the selection
according to Faster suggestions.
• The customer has to make sure
that all requirements of chosen
parts are respected, efficiency
is maintened and the end user
is informed about use
and maintenance operations.
• Faster and its Distributors are
not responsible for damages to
persons and machines caused by
an improper use and an incorrect
maintenance of products.
• Increase of products’ technical
and functional features is Faster’s
policy. For that reason all data in
this catalogue are not binding.
Faster is entitled to modify the
specifications without prior notice.
Guarantee
• All FASTER® products are
designed and produced
in conformity with the regulations
of Quality Managing System
according to UNI EN ISO 9001
and UNI ISO/TS 16949.
• They bear the FASTER® logo
to guarantee their origin
and reliability.
• FASTER® products are distributed
worldwide through a network
of highly qualified distributors.
▲
• Pressure settings could vary
within a range of ±10%.
• In case of seals damage it is
necessary to replace them by
FASTER® original spare parts.
Responsabilities
▲
▲
▲
Attention!
How to order
• See available item codes in the
ordering chart.
• As a further help in defining
and selecting the most suitable
product for the specific
application please ask and fill-in
with as much information as
possible the Product Definition
Form (mod. A003) sending
it back to Faster Customer
Service.
NEW
▲
N O V E LT I E S
I N
T H I S
C ATA L O G U E
• VU... F Series Stainless Steel
pag. 9 - 10
• VUCC Series
pag. 15
• Zinc plating with Cr III passivation on the whole range
UNI EN ISO 9001
Cert. n° 2905
ISO/TS 16949
3
Check Valves
4
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
Settings
different
from the
standard one
also available
▼
▼
▼
▼
▼
▼
▼
Female
and male
threads
▼
▼
▼
Standard
setting
35 kPa
(5 PSI)
▲
1)
2)
3)
4)
5)
F
A
S
VU...F
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
VU
▼
▼
Series
▼
▼
▼
▼
▼
▼
In the picture
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
VU...M
Standard
setting
35 kPa
(5 PSI)
Valve seal
in NBR
Nitrile Rubber
T
E
R®
C
H
E
C
K
V
A
L
V
E
S
Special FASTER® valve with flat seal.
Made of Steel with zinc plating and Cr III passivation.
Standard setting 35 kPa (5 PSI).
Wide range of threads and settings. Also available in AISI 316 Stainless Steel.
Available kits to update the crack pressure.
The descriptions and illustrations in this catalogue are for information only and are not binding.
5
▲
Features
• Shut-off system: valve with elastomeric seal
• The elastomeric seal guarantees perfect and reliable sealing
• Standard setting 35 kPa (5 PSI)
• Other settings and kits to update crack pressure available
up to 950 kPa (138 PSI) (see accessories page 14)
• Versions with female threads (VU...F series)
• Versions with male threads (VU...M series)
• Special versions available on request
• Also available in AISI 316 Stainless Steel (see at page 9)
• Also available with calibrated orifices (VU...S)
VU...M
VU...F
▲
Technical data
❖
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
04
06
08
12
16
20
24
32
Rated
flow
Minimum burst pressure
Max. work
pressure
mm
inc.
l/min
GPM
MPa
7
9,5
11
17
19
24
31
50
0.28
0.37
0.41
0.67
0.75
0.94
1.22
1.97
17
68
90
140
200
300
500
700
4,5
18
23,8
37
53
79,4
132,3
185
50
30
35
22
25
22
20
13
*
▲
DN
Nominal
diameter
Size
Valve
Threads
PSI
MPa
PSI
MPa
PSI
7250
4350
5075
3190
3625
3190
2900
1885
200
120
140
90
100
90
80
52
29000
17400
20300
13050
14500
13050
11600
7540
300
250
250
200
160
110
120
80
43500
36250
36250
29000
23200
15950
17400
11800
Accessories and spare part kit
See at page 14.
* Safety factor = 1:4 - For static pressure safety factor 1:2
Pressure drop graph:
test bench to ISO 7241-2 specifications with ISO VG 32 oil
at 40°C (104°F).
Materials:
- Steel.
- On request: AISI 316 Stainless Steel and brass.
- Surface treatment:
zinc plating with Cr III passivation.
- Springs in C98 Steel.
Seals: standard in oilproof NBR (Nitrile Rubber).
On request: Viton, Neoprene, EPDM or other seals.
Working temperatures:
with standard seals in NBR (Nitrile Rubber) from -25°C (-13°F)
to +125°C (+257°F).
Pressure drop values are referred to the standard setting of 35 kPa.
The descriptions and illustrations in this catalogue are for information only and are not binding.
6
▲
Available items
Size
❖
Code
Thread Ø A1 (inlet)
Thread Ø A2 (outlet)
Standards
CH
L
mm
inc.
mm
inc.
04
VU 14F 14F
VU 14FN 14FN
VU 14FJ 14FJ
* VU 14FS 14FS
1/4” BSP
1/4” NPTF
1/4” JPT
7/16” UNF
1/4” BSP
1/4” NPTF
1/4” JPT
7/16” UNF
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
50
50
50
50
1,97
1,97
1,97
1,97
19
19
19
19
0,75
0,75
0,75
0,75
06
VU 38F 38F
VU 38FN 38FN
VU 38FJ 38FJ
* VU 38FS 38FS
3/8” BSP
3/8” NPTF
3/8” JPT
9/16” UNF
3/8” BSP
3/8” NPTF
3/8” JPT
9/16” UNF
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
60
60
60
60
2,36
2,36
2,36
2,36
24
24
24
24
0,94
0,94
0,94
0,94
08
VU 12F 12F
VU 12FN 12FN
VU 12FJ 12FJ
VU 12FS 12FS
1/2” BSP
1/2” NPTF
1/2” JPT
3/4” UNF
1/2” BSP
1/2” NPTF
1/2” JPT
3/4” UNF
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
70
70
70
70
2,76
2,76
2,76
2,76
27
27
27
27
1,06
1,06
1,06
1,06
12
VU 34F 34F
VU 34FN 34FN
* VU 34FJ 34FJ
* VU 34FS 34FS
3/4” BSP
3/4” NPTF
3/4” JPT
1 1/16” UN
3/4” BSP
3/4” NPTF
3/4” JPT
1 1/16” UN
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
86
86
86
86
3,39
3,39
3,39
3,39
34
34
34
34
1,34
1,34
1,34
1,34
16
VU 1F 1F
VU 1FN 1FN
* VU 1FJ 1FJ
* VU 1FS 1FS
1” BSP
1” NPTF
1” JPT
1 5/16” UN
1” BSP
1” NPTF
1” JPT
1 5/16” UN
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
100
100
100
100
3,94
3,94
3,94
3,94
41
41
41
41
1,61
1,61
1,61
1,61
20
VU 114F 114F
VU 114FN 114FN
* VU 114FJ 114FJ
* VU 114FS 114FS
1 1/4” BSP
1 1/4” NPTF
1 1/4” JPT
1 5/8” UN
1 1/4” BSP
1 1/4” NPTF
1 1/4” JPT
1 5/8” UN
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
130
130
130
130
5,12
5,12
5,12
5,12
50
50
50
50
1,97
1,97
1,97
1,97
24
VU 112F 112F
VU 112FN 112FN
* VU 112FJ 112FJ
* VU 112FS 112FS
1 1/2” BSP
1 1/2” NPTF
1 1/2” JPT
1 7/8” UN
1 1/2” BSP
1 1/2” NPTF
1 1/2” JPT
1 7/8” UN
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
145
145
145
145
5,71
5,71
5,71
5,71
60
60
60
60
2,36
2,36
2,36
2,36
32
VU 2F 2F
VU 2FN 2FN
* VU 2FJ 2FJ
* VU 2FS 2FS
2” BSP
2” NPTF
2” JPT
2 1/2” UN
2” BSP
2” NPTF
2” JPT
2 1/2” UN
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
160
160
160
160
6,30
6,30
6,30
6,30
75
75
75
75
2,95
2,95
2,95
2,95
❖ Size
GAS = BSP
*On request
The descriptions and illustrations in this catalogue are for information only and are not binding.
7
▲
Available items
❖
Size
Code
Thread Ø A1 (inlet)
Thread Ø A2 (outlet)
Standards
* VU 14MN 14MN
* VU 14MJ 14MJ
* VU 14MS 14MS
1/4” BSP
1/4” NPTF
1/4” JPT
7/16” UNF
1/4” BSP
1/4” NPTF
1/4” JPT
7/16” UNF
VU 38M 38M
VU 38MN 38MN
* VU 38MJ 38MJ
* VU 38MS 38MS
3/8” BSP
3/8” NPTF
3/8” JPT
9/16” UNF
1/2” BSP
1/2” NPTF
1/2” JPT
3/4” UNF
VU 14M 14M
04
06
VU 12M 12M
* VU 12MN 12MN
* VU 12MJ 12MJ
* VU 12MS 12MS
08
❖ Size
GAS = BSP
CH
L
mm
inc.
mm
inc.
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
50
50
50
50
1,97
1,97
1,97
1,97
22
22
22
22
0,87
0,87
0,87
0,87
3/8” BSP
3/8” NPTF
3/8” JPT
9/16” UNF
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
51
51
51
51
2
2
2
2
22
22
22
22
0,87
0,87
0,87
0,87
1/2” BSP
1/2” NPTF
1/2” JPT
3/4” UNF
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
55
55
55
55
2,16
2,16
2,16
2,16
27
27
27
27
1,06
1,06
1,06
1,06
*On request
Check valves with mixed threads are available on request (example VU14M 14MJ = Inlet thread 1/4” BSP => Outlet thread 7/16” UNF).
VU...F and VU...M check valves are available with the settings specified below.
(Other special settings are available on request).
Settings
A
standard
B
C
D
E
F
G
H
I
L
M
O
P
Q
R
T
U
X
Y
Z
kPa
10
35
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
PSI
1,5
5
7,3
14,5
21,8
29
36,3
43,5
50,8
58
65
73
80
87
94
102
109
116
123
131
138
SIZE
AVAILABLE SETTINGS
1/4”
04
X
X
X
X
(*)
X
(*)
X
(*)
X
X
X
(*)
(*)
(*)
(*)
(*)
(*)
-
-
-
3/8”
06
(*)
X
X
X
X
X
X
X
(*)
X
X
X
(*)
X
(*)
(*)
(*)
(*)
-
-
-
1/2”
08
(*)
X
X
X
X
X
(*)
X
X
X
X
X
(*)
X
(*)
(*)
(*)
X
(*)
(*)
X
3/4”
12
(*)
X
X
X
X
X
(*)
X
X
(*)
X
X
(*)
X
(*)
(*)
(*)
X
(*)
(*)
(*)
1”
16
X
X
X
X
(*)
X
X
X
(*)
X
X
X
(*)
(*)
X
(*)
(*)
X
(*)
(*)
X
1-1/4”
20
X
X
X
X
X
X
(*)
X
(*)
X
X
X
(*)
(*)
(*)
(*)
(*)
X
(*)
(*)
(*)
1-1/2”
24
(*)
X
X
X
X
X
(*)
X
(*)
X
(*)
X
(*)
(*)
(*)
(*)
(*)
(*)
(*)
(*)
(*)
2”
32
(*)
X
X
X
X
X
X
X
(*)
X
X
X
(*)
(*)
(*)
(*)
(*)
X
(*)
X
(*)
A
standard
B
C
D
E
F
G
H
I
L
M
O
P
Q
R
T
U
X
Y
Z
(*) On request
Example: VU 14F 14F C = 1/4” check valve 100 kPa setting.
The descriptions and illustrations in this catalogue are for information only and are not binding.
8
▲
Features
NEW
• Shut-off system: valve with elastomeric seal
•
•
•
•
STAINLESS
STEEL
Completely made of AISI 316 Stainless Steel
The elastomeric seal guarantees perfect and reliable sealing
Standard setting 35 kPa (5 PSI)
Special versions available on request
▲
Technical data
❖
1/4”
3/8”
1/2”
3/4”
1”
11/4”
11/2”
2”
04
06
08
12
16
20
24
32
Rated
flow
Minimum burst pressure
Max. work
pressure
mm
inc.
l/min
GPM
MPa
7
9,5
11
17
19
24
31
50
0.28
0.37
0.41
0.67
0.75
0.94
1.22
1.97
17
68
90
140
200
300
500
700
4,5
18
23,8
37
53
79,4
132,3
185
45
27
31,5
20
22,5
20
18
11,2
*
▲
DN
Nominal
diameter
Size
Valve
Threads
PSI
MPa
PSI
MPa
PSI
6525
3915
4568
2900
3263
2900
2610
1624
180
108
126
80
90
80
72
45
26100
15660
18270
11600
13050
11600
10440
6525
270
225
225
180
144
100
110
72
39150
32625
32625
26100
20880
14500
15950
10440
Accessories and spare part kit
See at page 14.
* Safety factor = 1:4 - For static pressure safety factor 1:2
Pressure drop graph:
test bench to ISO 7241-2 specifications with ISO VG 32 oil
at 40°C (104°F).
Materials:
- AISI 316 Stainless Steel.
Seals: standard in oilproof NBR (Nitrile Rubber).
On request: Viton, Neoprene, EPDM or other seals.
Working temperatures:
with standard seals in NBR (Nitrile Rubber) from -25°C (-13°F)
to +125°C (+257°F).
Pressure drop values are referred to the standard setting of 35 kPa.
The descriptions and illustrations in this catalogue are for information only and are not binding.
9
▲
Available items
NEW
STAINLESS
STEEL
Size
❖
Code
VU 14F 14F 2
04
* VU 14FN 14FN 2
* VU 14FJ 14FJ 2
* VU 14FS 14FS 2
VU 38F 38F 2
06
* VU 38FN 38FN 2
* VU 38FJ 38FJ 2
* VU 38FS 38FS 2
VU 12F 12F 2
08
* VU 12FN 12FN 2
* VU 12FJ 12FJ 2
* VU 12FS 12FS 2
VU 34F 34F 2
12
* VU 34FN 34FN 2
* VU 34FJ 34FJ 2
* VU 34FS 34FS 2
VU 1F 1F 2
16
* VU 1FN 1FN 2
* VU 1FJ 1FJ 2
* VU 1FS 1FS 2
VU 114F 114F 2
20
* VU 114FN 114FN 2
* VU 114FJ 114FJ 2
* VU 114FS 114FS 2
VU 112F 112F 2
24
* VU 112FN 112FN 2
* VU 112FJ 112FJ 2
* VU 112FS 112FS 2
VU 2F 2F 2
32
❖ Size
* VU 2FN 2FN 2
* VU 2FJ 2FJ 2
* VU 2FS 2FS 2
GAS = BSP
Thread Ø A1 (inlet)
Thread Ø A2 (outlet)
Standards
1/4” BSP
1/4” NPTF
1/4” JPT
7/16” UNF
1/4” BSP
1/4” NPTF
1/4” JPT
7/16” UNF
3/8” BSP
3/8” NPTF
3/8” JPT
9/16” UNF
inc.
mm
inc.
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
50
50
50
50
1,97
1,97
1,97
1,97
19
19
19
19
0,75
0,75
0,75
0,75
3/8” BSP
3/8” NPTF
3/8” JPT
9/16” UNF
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
60
60
60
60
2,36
2,36
2,36
2,36
24
24
24
24
0,94
0,94
0,94
0,94
1/2” BSP
1/2” NPTF
1/2” JPT
3/4” UNF
1/2” BSP
1/2” NPTF
1/2” JPT
3/4” UNF
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
70
70
70
70
2,76
2,76
2,76
2,76
27
27
27
27
1,06
1,06
1,06
1,06
3/4” BSP
3/4” NPTF
3/4” JPT
1 1/16” UN
3/4” BSP
3/4” NPTF
3/4” JPT
1 1/16” UN
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
86
86
86
86
3,39
3,39
3,39
3,39
34
34
34
34
1,34
1,34
1,34
1,34
1” BSP
1” NPTF
1” JPT
1 5/16” UN
1” BSP
1” NPTF
1” JPT
1 5/16” UN
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
100
100
100
100
3,94
3,94
3,94
3,94
41
41
41
41
1,61
1,61
1,61
1,61
1 1/4” BSP
1 1/4” NPTF
1 1/4” JPT
1 5/8” UN
1 1/4” BSP
1 1/4” NPTF
1 1/4” JPT
1 5/8” UN
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
130
130
130
130
5,12
5,12
5,12
5,12
50
50
50
50
1,97
1,97
1,97
1,97
1 1/2” BSP
1 1/2” NPTF
1 1/2” JPT
1 7/8” UN
1 1/2” BSP
1 1/2” NPTF
1 1/2” JPT
1 7/8” UN
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
145
145
145
145
5,71
5,71
5,71
5,71
60
60
60
60
2,36
2,36
2,36
2,36
2” BSP
2” NPTF
2” JPT
2 1/2” UN
2” BSP
2” NPTF
2” JPT
2 1/2” UN
DIN 3852-2-X
ANSI B1.20.3
JIS B0203
SAE J1926-1
160
160
160
160
6,30
6,30
6,30
6,30
75
75
75
75
2,95
2,95
2,95
2,95
*On request
The descriptions and illustrations in this catalogue are for information only and are not binding.
10
CH
L
mm
Available
with several
settings
▼
▼
▼
▼
▼
▼
Heavy
duty
manufacture
Wide range
of threads
▼
▼
▼
▼
Compact
design
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
▼
In the picture
▼
▼
▼
▼
▼
▼
Series
VUC
Special valve
with metal
sealing
▲
1)
2)
3)
4)
F
A
S
T
E
R®
C
H
E
C
K
V
A
L
V
E
S
Special valve with metal sealing.
Compact design.
Made of Steel with zinc plating and Cr III passivation.
Wide range of threads and settings.
The descriptions and illustrations in this catalogue are for information only and are not binding.
11
▲
Features
• Shut-off system: valve with metal sealing
•
•
•
•
The metal sealing guarantees perfect and reliable sealing
Standard crack pressure 35 kPa (5 PSI)
Single piece body: extremely compact and robust
Special versions available on request
▲
Technical data
❖
3/8”
1/2”
3/4”
1”
06
08
12
16
Rated
flow
Max. work
pressure
mm
inc.
l/min
GPM
MPa
5
7
9.5
12.5
0.20
0.28
0.37
0.49
20
40
65
90
5.3
10.6
17.2
23.8
40
40
40
40
*
▲
DN
Nominal
diameter
Size
Accessories and spare part kit
Minimum burst pressure
Please contact FASTER
Research & Development Dept.
PSI
MPa
PSI
5800
5800
5800
5800
160
160
160
160
23200
23200
23200
23200
* Safety factor = 1:4 - For static pressure safety factor 1:2
Pressure drop graph:
test bench to ISO 7241-2 specifications with ISO VG 32 oil
at 40°C (104°F).
Materials:
- Steel
- On request: AISI 316 Stainless Steel and brass.
- Surface treatment:
zinc plating with Cr III passivation.
- Springs in C98 Steel.
Seals: standard in oilproof NBR (Nitrile Rubber).
On request: Viton, Neoprene, EPDM or other seals.
Working temperatures:
with standard seals in NBR (Nitrile Rubber) from -25°C (-13°F)
to +125°C (+257°F).
Pressure drop values are referred to the standard setting of 35 kPa.
The descriptions and illustrations in this catalogue are for information only and are not binding.
12
▲
Available items
Size
Thread A1
Thread standards
A1
Threaded end A2
(outlet)
Thread A2
Thread standards
A2
mm
inc.
mm
inc.
VUC 13/ES-13/ES
VUC 13/ES-28/ES
VUC 13/ES-1/ES
VUC 1/ES-13/ES
VUC 1/ES-11/ES
VUC 11/ES-1/ES
VUC 11/ES-11/ES
T1
T1
T1
T3
T3
T4
T4
9/16” UNF
9/16” UNF
9/16” UNF
9/16” UNF
9/16” UNF
11/16” UNF
11/16” UNF
ISO 8434-2
ISO 8434-2
ISO 8434-2
SAE J1926-3
SAE J1926-3
ISO 8434-3
ISO 8434-3
T1
T2
T3
T1
T4
T3
T4
9/16” UNF
9/16” UNF
9/16” UNF
9/16” UNF
11/16” UNF
9/16” UNF
11/16” UNF
ISO 8434-2
ISO 8434-2
SAE J1926-3
ISO 8434-2
ISO 8434-3
SAE J1926-3
ISO 8434-3
38
40,5
38
38
38
38
38
1,50
1,59
1,50
1,50
1,50
1,50
1,50
19
19
19
19
19
19
19
0,75
0,75
0,75
0,75
0,75
0,75
0,75
* VUC 13/FS-13/FS
* VUC 13/FS-28/FS
* VUC 13/FS-1/FS
T1
T1
T1
T3
T3
T4
T4
3/4” UNF
3/4” UNF
3/4” UNF
3/4” UNF
3/4” UNF
13/16” UNF
13/16” UNF
ISO 8434-2
ISO 8434-2
ISO 8434-2
SAE J1926-3
SAE J1926-3
ISO 8434-3
ISO 8434-3
T1
T2
T3
T1
T4
T3
T4
3/4” UNF
3/4” UNF
3/4” UNF
3/4” UNF
13/16” UNF
3/4” UNF
13/16” UNF
ISO 8434-2
ISO 8434-2
SAE J1926-3
ISO 8434-2
ISO 8434-3
SAE J1926-3
ISO 8434-3
42
42
42
42
42
42
42
1,65
1,65
1,65
1,65
1,65
1,65
1,65
22
22
22
22
22
22
22
0,87
0,87
0,87
0,87
0,87
0,87
0,87
T1
T1
T1
T3
T3
T4
T4
1 1/16” UN
1 1/16” UN
1 1/16” UN
1 1/16” UN
1 1/16” UN
1 3/16” UN
1 3/16” UN
ISO 8434-2
ISO 8434-2
ISO 8434-2
SAE J1926-3
SAE J1926-3
ISO 8434-3
ISO 8434-3
T1
T2
T3
T1
T4
T3
T4
1 1/16” UN
1 1/16” UN
1 1/16” UN
1 1/16” UN
1 3/16” UN
1 1/16” UN
1 3/16” UN
ISO 8434-2
ISO 8434-2
SAE J1926-3
ISO 8434-2
ISO 8434-3
SAE J1926-3
ISO 8434-3
50
50
50
51
50
50
48
1,97
1,97
1,97
2,01
1,97
1,97
1,89
32
32
32
32
32
32
32
1,26
1,26
1,26
1,26
1,26
1,26
1,26
T1
T1
T1
T3
T3
T4
T4
1 5/16” UN
1 5/16” UN
1 5/16” UN
1 5/16” UN
1 5/16” UN
1 7/16” UN
1 7/16” UN
ISO 8434-2
ISO 8434-2
ISO 8434-2
SAE J1926-3
SAE J1926-3
ISO 8434-3
ISO 8434-3
T1
T2
T3
T1
T4
T3
T4
1 5/16” UN
1 5/16” UN
1 5/16” UN
1 5/16” UN
1 7/16” UN
1 5/16” UN
1 7/16” UN
ISO 8434-2
ISO 8434-2
SAE J1926-3
ISO 8434-2
ISO 8434-3
SAE J1926-3
ISO 8434-3
52
52
52
52
52
52
50,5
2,05
2,05
2,05
2,05
2,05
2,05
1,99
38
38
38
38
38
38
38
1,50
1,50
1,50
1,50
1,50
1,50
1,50
Code
*
*
*
*
*
06
08
VUC 1/FS-13/FS
* VUC 1/FS-11/FS
* VUC 11/FS-1/FS
* VUC 11/FS-11/FS
VUC 13/HS-13/HS
* VUC 13/HS-28/HS
* VUC 13/HS-1/HS
12
*
VUC 1/HS-13/HS
VUC 1/HS-11/HS
VUC 11/HS-1/HS
VUC 11/HS-11/HS
* VUC 13/LS-13/LS
* VUC 13/LS-28/LS
* VUC 13/LS-1/LS
* VUC 1/LS-13/LS
* VUC 1/LS-11/LS
* VUC 11/LS-1/LS
16
VUC 11/LS-11/LS
❖ Size
CH
L
Threaded end A1
(inlet)
❖
GAS = BSP
*On request
▲
Threaded ends
T1
T2
T3
T4
VUC check valves are available with the settings specified below.
(Other special settings are available on request).
Settings
A
standard
B
C
D
E
F
G
H
I
L
M
O
P
Q
R
T
U
X
Y
Z
kPa
10
35
50
100
150
200
250
300
350
400
450
500
550
600
650
700
750
800
850
900
950
PSI
1,5
5
7,3
14,5
21,8
29
36,3
43,5
50,8
58
65
73
80
87
94
102
109
116
123
131
138
The descriptions and illustrations in this catalogue are for information only and are not binding.
13
▲
Spare parts kits for VU series check valves
Original spare parts kits for Faster check valves are available
with detailed instructions for replacement.
The kit contains the retaining rings with the specific spring
for the required crack pressure.
Please refer to the following table for the ordering codes.
Notice: Using the kits it is also possible to modify the crack pressure
of the check valves VU series by shifting from a setting to another.
This update is only allowed within the setting ranges specified
in the table below.
▲
Series VU...F e VU...M
Size
Check valve
Spare part kit (#)
Setting range
1/4”
04
VU 14...
KIT VU 14F...
Among the whole
setting range
3/8”
06
VU 38...
KIT VU 38F...
Among the whole
setting range
1/2”
08
VU 12...
KIT VU 12F...
From 10 to 550 kPa
From 600 to 950 kPa
3/4”
12
VU 34...
KIT VU 34F...
Among the whole
setting range
1”
16
VU 1...
KIT VU 1F...
Among the whole
setting range
1-1/4”
20
VU 114...
KIT VU 114F...
Among the whole
setting range
1-1/2”
24
VU 112...
KIT VU 112F...
Among the whole
setting range
2”
32
VU 2...
KIT VU 2F...
Among the whole
setting range
# For the suffix indicating the setting please refer to the table at page 8.
Example - kit code for product VU 34F G set at 30 kPa (43,5 PSI): KIT VU 34F G.
▲
VUC series spare part kit
Please contact FASTER
Research & Development Dept.
The descriptions and illustrations in this catalogue are for information only and are not binding.
14
ACCESSORIES
▲
VUCC series
Micro check valves, cartridge design
characterized by a very compact design, VUCC check valves
are suitable for mounting in Metric, BSP or SAE housings.
Designed in two versions for radial or axial flow, VUCC
check valves can be customized for specific housings.
For products information and ordering codes please
contact our sales offices.
NEW
SPECIAL
SERIES
▲
VU... S series
Throated check valves
to guarantee a minimum calibrated flow.
VU... S series valves are available in several models:
• calibrated flow in one direction,
no flow in the opposite one
• calibrated flow in one direction
and total flow in the opposite one
For products information and ordering codes please
contact our sales offices.
▲
BVU series
Manifold blocks for check valves
made of aluminium, BVU blocks integrate several
check valves with different settings in order to allow
various functionalities.
Thanks to their modular design, both in terms
of settings and threads, a wide range of applications
is guaranteed.
For products information and ordering codes please
contact our sales offices.
The descriptions and illustrations in this catalogue are for information only and are not binding.
15
Ask for our catalogues
CAT. 0110/I Italiano
CAT. 0110/GB English
CAT. 0110/F Français
General Line
CAT. 0111-I Italiano
CAT. 0111-GB English
Multifaster series
CAT. 0112-I Italiano
CAT. 0112-GB English
Agriculture series
CAT. 0113-I Italiano
CAT. 0113-GB English
FF Flat-Face series
CAT. 0114-I Italiano
CAT. 0114-GB English
Screw-on couplings series
CAT. 0115-I Italiano
CAT. 0115-GB English
Standard series
CAT. 0116-I Italiano
CAT. 0116-GB English
CPV-CNV and CVV series
CAT. 0117-I Italiano
CAT. 0117-GB English
DF series
▲
Guarantee
All FASTER® quick-release
couplings are designed and
produced in conformity with
the regulations of Quality
Managing System according
to UNI EN ISO 9001
and UNI ISO/TS 16949
Standards.
They bear the FASTER® logo
to guarantee their origin and
reliability.
FASTER® quick-release
couplings are distributed
worldwide through a network
of highly qualified distributors.
CAT. 0119-I Italiano
CAT. 0119-GB English
VU series
UNI EN ISO 9001
Cert. n° 2905
ISO/TS 16949
I - FASTER S.p.A.
I-26027 RIVOLTA D’ADDA (CR) Italy - Via L. Ariosto, 7
(+39) 0363.377211 - Fax (+39) 0363.377333
www.faster.it - faster@faster.it
D-BENELUX - FASTER - Jürgen Gamers
D-40764 LANGENFELD GER - Ursulaweg, 39
(+49) (0) 2173.83924 - Fax (+49) (0) 2173.83925
www.faster-germany.de - JGamers@t-online.de
CAT 0119/04/06-GB
CAT. 0118-I Italiano
CAT. 0118-GB English
RF series
USA - FASTER Inc.
MAUMEE, OH 43537-9505 - 6560 Weatherfield, Ct.
(+1) 419-868-8197 - (+1) 800-231-2501 - Fax (+1) 419-868-8360
www.fasterinc.com - eng@fasterinc.com
F - FASTER - François Divet
F-35200 RENNES - 11, Rue Jean Bras
(+33) (0) 2.99.51.44.94
Fax (+33) (0) 2.99.51.00.13
francois.divet@wanadoo.fr
UK - FASTER - Richard Bennett
GB-TA18 7BY UK
19 Beechwood Drive CREWKERNE, Somerset
(+44) (0) 1460.77020 - Fax (+44) (0) 1460.77020
faster.uk@virgin.net