Standard cylinders DNC, ISO 15552

advertisement
Standard cylinders DNC, ISO 15552
Standard cylinders DNC, ISO 15552
Key features
At a glance
DIN
Standards-based cylinders to
ISO15552 (corresponds to the
withdrawn standards ISO 6431,
DIN ISO 6431, VDMA24562,
NFE49003.1 and UNI 10290)
Cylinder with clamping units
DNC-KP
The modern design and construc­
tion save up to 11% on fitting
space compared to ordinary stan­
dard cylinders, thus permitting a
considerably more compact system
design
An extensive range of accessories
makes it possible to install the
cylinder virtually anywhere
The widest range of variants on the
market provides the right DNC
cylinder for every application
DNCKE
Piston rod can be held or clamped
in any position
Piston rod can be held in position
for long periods even with alternat­
ing loads, fluctuating operating
pressure or leaks in the system
Cylinder with end-position locking
DNC- … -EL
Suitable for use in safety-related
control systems in compliance with
EN 954-1, EN 1050, EN 292 and
EN 983
Fail-safe
Piston rod can be clamped in any
position
Cylinder/valve combination
DNC-V1 … V6
Mechanical locking when the end
position is reached
Lock is only automatically released
when pressure is supplied to the
cylinder
End-position locking at one or both
ends
The cylinder/valve combination is
assembled and fitted with tubing
ready for connection
Particularly suitable for decentra­
lised use in larger systems
Tandem cylinder
DNCT
Connection of 2 cylinders with the
same piston diameter and stroke in
series
Double the thrust and return force
in comparison to a standard
cylinder
Longer service life thanks to the bellows kit DADB
1
2
The bellows kit is a leak-free system.
To prevent unwanted media being
drawn in, the supply and exhaust air
must be ducted via a pressure com­
pensation hole in the connection part
1.
è Internet: www.festo.com/catalog/...
The kit protects the piston rod, seal
and bearings from a wide range of
media, for example:
dust,
chips,
oil,
grease,
fuel.
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Key features
Variants from the modular product system
Symbol
Key features
ÓÓÓÓÓ
ÓÓÓÓÓ
ÓÓÓÓÓ
Description
S2
Through piston rod
For working at both ends with the same force in the forward and return stroke,
for attaching external stops
S6
Heat-resistant seals
Temperature resistance up to max. 120 °C
S10
Constant motion (slow speed) at low piston
speeds
S11
Low friction
S20
Through, hollow piston rod
Suitable for slow stroke movements at a constant, stick-slip-free speed over
the full stroke of the cylinder.
Seal contains silicone grease (not free of paint-wetting impairment substances)
Special seals considerably reduce system wear. This means a considerably
lower response pressure.
Seal contains silicone grease (not free of paint-wetting impairment substances)
For supplying vacuum, small parts, media, etc.
K2
Extended male piston rod thread
–
K3
Female piston rod thread
–
K5
Special piston rod thread
Metric standard thread to ISO
K7
Piston rod with external hexagon
Special spanner flats
K8
Extended piston rod
–
K10
Smooth anodised aluminium piston rod
KP
With clamping unit
Ideal for use in welding environments:
– Protection against welding spatter
– Small working loads
– Harder surface compared to steel
– Long service life
Integrated clamping unit on the piston rod
EL
With end-position locking
Positive locking in the end position as a drop guard. If there is a drop in pres­
sure, the piston rod is secured in its end position to prevent it from dropping
Q
Square piston rod
Protection against rotation. For correctly oriented feeding
R3
High corrosion protection
R8
Dust protection (wiper seal)
All external cylinder surfaces comply with corrosion resistance class 3 to Festo
standard 940 070. The piston rod is made from corrosion and acid-resistant
steel
The cylinder is equipped with a hard-chrome plated piston rod and a rigid
wiper seal, which protects against dry, dusty media
Software tools
è www.festo.com
Configuration of Festo modular
products
è www.festo.com
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
3
Standard cylinders DNC, ISO 15552
[mm]
[mm]
DNC
32, 40,
50, 63,
80, 100,
125
20, 25, 30, 40, 10 … 2000
50, 60, 70, 80,
100, 125, 150,
160, 200, 250,
300, 320, 400,
500
Standard hole pattern, with clamping unit
DNC-KP
32, 40,
50, 63,
80, 100,
125
DNCKE
40, 63,
100
–
–
Standard hole pattern, with end-position locking
DNC-…-EL
32, 40,
–
50, 63,
80, 100
Standard hole pattern, cylinder/valve combination
DNC-V1 … V6 32, 40,
–
50, 63,
80, 100
Standard hole pattern, tandem cylinder
DNCT
32, 40,
50
63, 80,
100, 125
4
–
è Internet: www.festo.com/catalog/...
A
Q
S2/S20
K2
Special piston rod thread
Stroke
Female piston rod thread
Basic version
Piston j
Extended male piston rod
thread
Doubleacting
Type
Through/hollow piston rod
Design
Position sensing
Function
Protection against rotation
Product range overview
K3
K5
n
n
n
n
n
n
n
n
n
S2
n
n
n
n
–
–
–
–
–
n
–
n
S2
n
n
n
n
n
n
n
n
n
n
–
–
–
–
–
10 … 2000
10 … 2000
10 … 2000
100 … 2000
2 … 500
3 … 500
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Product range overview
è Page/Internet
K7
K8
K10
S6
S10
S11
R3
Cylinder/valve combina­
tion
Dust protection
High corrosion protection
Low friction
Slow speed
(constant motion)
Heat-resistant seals
to max. 120 °C
Smooth anodised piston
rod
Extended piston rod
Special spanner flats
Type
V1 … V6
R8
Basic version
DNC
9
n
n
n
n
n
n
n
n
–
Standard hole pattern, with clamping unit
DNC-KP
n
n
25
–
–
–
–
–
–
n
DNCKE
2
–
–
–
–
–
–
–
–
–
Standard hole pattern, with end-position locking
DNC-…-EL
–
n
–
33
–
–
–
–
–
–
Standard hole pattern, cylinder/valve combination
DNC-V1 … V6
n
n
n
40
–
n
n
–
n
n
Standard hole pattern, tandem cylinder
DNCT
–
2016/03 – Subject to change
–
2
–
n
–
–
–
–
è Internet: www.festo.com/catalog/...
–
5
Standard cylinders DNC, ISO 15552
Peripherals overview
1
2
3
5
8
4
7
6
aJ
9
aB
aA
aC
bH
bI
aD
aB
5
bG
aF
aE
aF
bF
aG
aI
bJ
aH
bE
bA
aJ
bB
bD
2
3
4
5
DNC-…-S2
bC
Mounting attachments and accessories
Description
1
2
3
4
5
6
7
8
6
Multi-position kit
DPNC
Foot mounting
HNC/CRHNC
Flange mounting
FNC/CRFNG
Trunnion flange
ZNCF/CRZNG
Trunnion support
LNZG/CRLNZG
Swivel flange
SNC
Clevis foot
LSNG
Clevis foot
LSNSG
For connecting two cylinders with identical piston
diameters to form a multi-position cylinder
For bearing or end caps
DNC
Basic version KP
V1 … V6
EL
è Page/
Internet
n1)
n
n
n1)
49
n
n
n
n
50
n
n
n
n
n
n
n
n
n
n
n
n
54
For end caps
n1)
n1)
n
n1)
55
With spherical bearing
n1)
n1)
n
n1)
58
Weld-on, with spherical bearing
n1)
n1)
n
n1)
58
– For bearing or end caps
– Cannot be used on the bearing cap
in combination with bellows kit DADB
– For bearing or end caps
– Cannot be used on the bearing cap
in combination with bellows kit DADB
–
è Internet: www.festo.com/catalog/...
51
52
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Peripherals overview
Mounting attachments and accessories
Description
9
aJ
aA
aB
aC
aD
aE
aF
aG
aH
aI
bJ
bA
bB
bC
bD
bE
bF
bG
bH
bI
1)
2)
DNC
Basic version KP
V1 … V6
EL
è Page/
Internet
Swivel flange
SNCS/CRNCS/SNCS-…-R3
Clevis foot
LBG/LBG-…-R3
Swivel flange
SNCL
Swivel flange
SNCB/SNCB-…-R3
Clevis foot
LNG/CRLNG
Clevis foot
LSN
Trunnion mounting kit
DAMT
Rod eye
SGS/CRSGS
Right-angle clevis foot
LQG
Rod clevis
SGA
Coupling piece
KSG
Coupling piece
KSZ
Rod clevis
SG/CRSG
Self-aligning rod coupler
FK/CRFK
Adapter
AD
Guide unit
FENG
With spherical bearing for end caps
n1)
n1)
n
n1)
57
–
n1)
n
n
n1)
58
For end caps
n1)
n1)
n
n1)
57
For end caps
n1)
n1)
n
n1)
56
–
n1)
n1)
n
n1)
58
With spherical bearing
n1)
n1)
n
n1)
58
For mounting anywhere along the cylinder profile
barrel
With spherical bearing
n
n
n
n
53
n
n
n
n
59
–
n
n
n
n
58
With male thread
n
n
n
n
59
n
n
n
n
n
n
n
n
n
n
n
n
59
n
n
n
n
59
n
–
–
n
59
–
–
Mounting kit
SMB-8-FENG
For attaching proximity sensor SMT-8 to cylinders
in combination with guide unit FENG
n
–
Slot cover
ABP-5-S
Proximity sensor
SME/SMT-8
One-way flow control valve
GRLA
Push-in fitting
QS
Bellows kit
DADB
For protecting the sensor cables and keeping dirt
out of the sensor slots
Can be integrated in the cylinder profile barrel
n
n
n
n
65
n
n
n
n
65
For regulating speed
n
n
n
n
66
For connecting compressed air tubing
with standard outside diameter
– Protects the cylinder (piston rod, seal
and bearings) against a wide range of media
and thus prevents premature wear
– The kit can only be used in combination
with an extended piston rod (K8)
n
n
n
n
quick star
To compensate for radial deviations
For cylinders with a non-rotating piston rod
to compensate for radial deviations
Permits a swivelling movement of the cylinder
in one plane
For compensating radial and angular deviations
For fitting a suction cup on a hollow cylinder
piston rod
For protecting standard cylinders against rotation
at high torque loads
n
n2)
n
 50 and
above
n
 50 and
above
59
59
64
64
60
n
–
n
n
Not with variant S2 or S20
For piston  32, 40 mm only with variant R3
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
7
Standard cylinders DNC, ISO 15552
Type codes
u
DNC
—
80
—
320
—
PPV
—
A
Type
Double-acting
DNC
Standard cylinder
Piston j [mm]
Stroke [mm]
Cushioning
P
PPV
Flexible cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends
Position sensing
Without position sensing
Via proximity sensor
A
-H-
Note
The standard cylinder DNC can be
ordered using either a fixed part
number and type designation or via
the modular product system.
The type code listed above only
8
applies to the DNC standard cylinder
with fixed part number and type
designation.
Variants can only be ordered using
the modular product system.
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Technical data
-N-
Function
DNC-…
Without position sensing
-T-W-
Diameter
32 … 125 mm
Stroke length
10 … 2000 mm
www.festo.com
Wearing parts kits
è 24
DNC-…-A-…
With position sensing
DIN
Standards-based cylinders to
ISO15552 (corresponds to the
withdrawn standards ISO 6431,
DIN ISO 6431, VDMA24562,
NFE49003.1 and UNI 10290)
General technical data
Piston 
Pneumatic connection
Piston rod thread
K3
K5
Constructional design
Max. torsional backlash
of piston rod [°]
Cushioning
Q
Cushioning length PPV
Position sensing
Type of mounting
[mm]
Mounting position
32
40
50
63
80
100
125
Gx
M10x1.25
M6
M10
Piston
Piston rod
Profile barrel
±0.65
G¼
M12x1.25
M8
M12
G¼
M16x1.5
M10
M16
Gy
M16x1.5
M10
M16
Gy
M20x1.5
M12
M20
G½
M20x1.5
M12
M20
G½
M27x2
M16
M27
±0.6
±0.45
±0.45
±0.45
±0.45
–
22
32
32
42
Flexible cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends
20
20
22
Via proximity sensor
Via female thread
Via accessories
Any
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
9
Standard cylinders DNC, ISO 15552
Technical data
Operating and environmental conditions
Piston 
32
Operating medium
Note on operating/pilot medium
Operating pressure
[bar]
R8
S11
Ambient temperature1)
[°C]
Corrosion resistance class
CRC2)
Certification
ATEX
1)
2)
S6
R3
50
63
80
100
125
0.6 … 10
1.5 … 10
0.06 … 10
0.1 … 10
Note operating range of proximity sensors
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
Corrosion resistance class CRC 3 to Festo standard FN 940070
High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial
environment.
Force [N] and impact energy [J]
Piston 
Theoretical force at 6 bar,
advancing
Theoretical force at 6 bar,
retracting
Max. impact energy
at the end positions1)
1)
40
Compressed air in accordance with ISO 8573­1:2010 [7:4:4]
Operation with lubricated medium possible (in which case lubricated operation will always be required)
0.6 … 12
1.5 … 12
After 10 strokes
0.16 … 12
0.1 … 12
0.06 … 12
After 24 hours
0.3 … 12
0.2 … 12
0.1 … 12
–20 … +80
0 … 120
2
3
Germanischer Lloyd
Specified types è www.festo.com
S2/S20
S2/S20
32
40
50
63
80
100
125
483
415
415
415
0.1
754
633
633
633
0.2
1178
990
990
990
0.2
1870
1682
1682
1682
0.5
3016
2721
2721
2721
0.9
4712
4418
4418
4418
1.2
7363
6881
6881
6881
5
The permissible impact energy is reduced by approx. 10% for variants K10 and S20
Permissible impact velocity:
vperm. +
Ǹ
2xE perm.
mdead ) mload
2xEperm.
*mdead
v2
Maximum permissible load:
mload +
10
è Internet: www.festo.com/catalog/...
vperm.
Eperm.
mIntrinsic
mLoad
Permissible impact velocity
Max. impact energy
Moving load (drive)
Moving effective load
-H-
Note
This data represents the maximum
values that can be achieved. The
maximum permissible impact energy
must be observed.
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Technical data
Lateral force Fq as a function of stroke length l
Basic version
Fq





2016/03 – Subject to change
32
40
50/63
80/100
125
è Internet: www.festo.com/catalog/...
11
Standard cylinders DNC, ISO 15552
Technical data
Max. torque = 1100 Nmm / Max. stroke = 400 mm
Fq [N]
Fq [N]
Max. torque = 800 Nmm / Max. stroke = 300 mm
s [mm]
 40
s [mm]
Lateral force Fq as a function of stroke length l and lever arm s
Q – Square piston rod
 32
l [mm]
Max. torque = 3000 Nmm / Max. stroke = 600 mm
s [mm]
Fq [N]
 80/100
Max. torque = 1500 Nmm / Max. stroke = 500 mm
Fq [N]
 50/63
s [mm]
l [mm]
l [mm]
l [mm]
Examples for piston  32 mm
Example 1:
Stroke length l = 150 mm
Result: permissible
Lateral force Fq = 9.5 N
Lever arm s
= 84 mm
12
Example 2:
Lateral force Fq = 40 N
Result: permissible
Stroke length l = 28 mm
Lever arm s
= 20 mm
è Internet: www.festo.com/catalog/...
Example 3:
Stroke length l = 150 mm
Lever arm s
= 100 mm
Max. torque 800 Nmm
Fq =
Lever arm 100 mm
=8N
Result: permissible
Fq = 8 N Fqmax. = 9.5 N
Fq
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Technical data
Weight [g]
Piston 
32
40
50
63
80
100
125
Basic version
Product weight with 0 mm stroke
Additional weight per 10 mm stroke
517
30
800
45
1260
64
1709
73
2790
106
4653
115
6771
168
Moving load with 0 mm stroke
Additional load per 10 mm stroke
162
9
307
16
538
25
663
25
1131
38
1544
38
2809
63
Q – Square piston rod
Product weight with 0 mm stroke
Additional weight per 10 mm stroke
504
29
738
41
1187
60
1632
68
2652
99
4508
108
–
–
Moving load with 0 mm stroke
Additional load per 10 mm stroke
149
8
244
11
465
20
587
20
994
31
1399
31
–
–
S2 – Through piston rod
Product weight with 0 mm stroke
Additional weight per 10 mm stroke
576
39
895
61
1390
89
1917
98
3114
144
5297
153
7529
231
Moving load with 0 mm stroke
Additional load per 10 mm stroke
170
18
330
32
560
50
711
50
1200
76
1660
76
2925
126
K10 – Smooth anodised piston rod
Product weight with 0 mm stroke
Additional weight per 10 mm stroke
443
24
655
35
1001
47
1437
57
2302
81
4138
90
5719
127
Moving load with 0 mm stroke
Additional load per 10 mm stroke
88
3
162
6
279
8
391
9
643
13
1029
13
1757
22
S2-K10 – Through, smooth anodised piston rod
Product weight with 0 mm stroke
514
Additional weight per 10 mm stroke
27
766
40
1181
56
1676
65
2701
94
4821
103
6674
148
Moving load with 0 mm stroke
Additional load per 10 mm stroke
201
11
351
17
470
17
787
26
1184
26
2070
43
2016/03 – Subject to change
108
6
è Internet: www.festo.com/catalog/...
13
Standard cylinders DNC, ISO 15552
Technical data
Materials
Sectional view
3
2
1
2
Standard cylinder
Basic version
K10
1
Profile barrel
Wrought aluminium alloy, smooth anodised
2
3
–
Bearing and end caps
Piston rod
Seals
Note on materials
Wrought aluminium alloy, smooth
anodised
Die-cast aluminium
High-alloy steel
Polyurethane, nitrile rubber
RoHS compliant
Wrought aluminium alloy, anodised
Standard cylinder
R8
1
2
3
Profile barrel
Bearing and end caps
Piston rod
–
Seals
Note on materials
Wrought aluminium alloy, smooth anodised
Die-cast aluminium
Tempered steel,
High-alloy steel
hard-chromium plated
Polyurethane, nitrile rubber Fluoro rubber
RoHS compliant
14
S6
è Internet: www.festo.com/catalog/...
R3
S10
High-alloy stainless steel
S11
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Technical data
Download CAD data è www.festo.com
Dimensions – Basic version
1 For mounting attachments:
 32 … 100: Socket head
screw with female thread
 125: Thread in the end cap


3 Slot for proximity sensor
SME/SMT-8
+
= plus stroke length
AM
B

d11
BG
E
EE
J2
J3
KK
L1
L2
22
24
32
32
40
40
54
30
35
40
45
45
55
60
16
16
17
17
17
17
22
45
54
64
75
93
110
134
Gx
G¼
G¼
Gy
Gy
G½
G½
6
8
10.4
12.4
12.5
12
13
5.2
6
8.5
10
8
10
8
M10x1.25
M12x1.25
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M27x2
18
21.5
28
28.5
34.7
38.2
46
94
105
106
121
128
138
160
[mm]
32
40
50
63
80
100
125
2 Regulating screw for adjustable
end-position cushioning
L7
MM

PL
RT
TG
VA
VD
WH
ZJ
ß1
ß2
ß3
3.3
3.6
5.1
6.6
10.5
8
14
12
16
20
20
25
25
32
15.6
14
14
17
16.4
18.8
18
M6
M6
M8
M8
M10
M10
M12
32.5
38
46.5
56.5
72
89
110
4
4
4
4
4
4
6
10
10.5
11.5
15
15.7
19.2
20.5
26
30
37
37
46
51
65
120
135
143
158
174
189
225
10
13
17
17
22
22
27
16
18
24
24
30
30
36
6
6
8
8
6
6
8
[mm]
32
40
50
63
80
100
125
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
15
Standard cylinders DNC, ISO 15552
Technical data
Download CAD data è www.festo.com
Dimensions – Variants
Q – Square piston rod
S2 – Through piston rod
+ = plus stroke length
++ = plus 2x stroke length
S20 – Through hollow piston rod
+ = plus stroke length
++ = plus 2x stroke length

B1
o
D8

ZJ
ZM
10
12
16
16
20
20
–
4.5
5.5
81)
8
11.7
11.7
13
120
135
143
158
174
189
225
148
167
183
199
222
240
291
[mm]
32
40
50
63
80
100
125
1)
2)
16
Internal narrowing to  5.5 mm
Internal narrowing to  10.2 mm
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Technical data
Download CAD data è www.festo.com
Dimensions – Variants
K2 – Extended male piston rod thread
K3 – Female piston rod thread
K5 – Special piston rod thread
K7 – Piston rod with external hexagon
K8 – Extended piston rod
-H-
Note
In combination with variant S2/S20,
the piston rod is extended at one

A1
max.
A2
max.
AF
35
35
70
70
70
70
70
500
500
500
500
500
500
500
12
12
16
16
20
20
32
AM
KF
KK
Basic thread
Special
thread1)
M10x1.25
M12x1.25
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M27x2
M10
M12
M16
M16
M20
M20
M27
[mm]
32
40
50
63
80
100
125
1)
22
24
32
32
40
40
54
M6
M8
M10
M10
M12
M12
M16
end. In combination with variant Q,
the square piston rod is extended.
T4
WH
ß1
2.6
3.3
4.7
4.7
6.1
6.1
8
26
30
37
37
46
51
65
10
13
17
17
22
22
27
The special threads are only available as male threads. The mounting nut on the piston rod thread is included in the scope of delivery
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
17
Standard cylinders DNC, ISO 15552
Technical data
Ordering data – Without position sensing
Piston 
Stroke
Part No.
[mm]
[mm]
Type1)
Piston 
[mm]
Stroke
[mm]
Part No.
Type1)
32
25
40
50
80
100
125
160
200
250
320
400
500
163319
163320
163321
163322
163323
163324
163325
163326
163327
163328
163329
163330
DNC-32-25-PPV
DNC-32-40-PPV
DNC-32-50-PPV
DNC-32-80-PPV
DNC-32-100-PPV
DNC-32-125-PPV
DNC-32-160-PPV
DNC-32-200-PPV
DNC-32-250-PPV
DNC-32-320-PPV
DNC-32-400-PPV
DNC-32-500-PPV
40
25
40
50
80
100
125
160
200
250
320
400
500
163351
163352
163353
163354
163355
163356
163357
163358
163359
163360
163361
163362
DNC-40-25-PPV
DNC-40-40-PPV
DNC-40-50-PPV
DNC-40-80-PPV
DNC-40-100-PPV
DNC-40-125-PPV
DNC-40-160-PPV
DNC-40-200-PPV
DNC-40-250-PPV
DNC-40-320-PPV
DNC-40-400-PPV
DNC-40-500-PPV
50
25
40
50
80
100
125
160
200
250
320
400
500
163383
163384
163385
163386
163387
163388
163389
163390
163391
163392
163393
163394
DNC-50-25-PPV
DNC-50-40-PPV
DNC-50-50-PPV
DNC-50-80-PPV
DNC-50-100-PPV
DNC-50-125-PPV
DNC-50-160-PPV
DNC-50-200-PPV
DNC-50-250-PPV
DNC-50-320-PPV
DNC-50-400-PPV
DNC-50-500-PPV
63
25
40
50
80
100
125
160
200
250
320
400
500
163415
163416
163417
163418
163419
163420
163421
163422
163423
163424
163425
163426
DNC-63-25-PPV
DNC-63-40-PPV
DNC-63-50-PPV
DNC-63-80-PPV
DNC-63-100-PPV
DNC-63-125-PPV
DNC-63-160-PPV
DNC-63-200-PPV
DNC-63-250-PPV
DNC-63-320-PPV
DNC-63-400-PPV
DNC-63-500-PPV
80
25
40
50
80
100
125
160
200
250
320
400
500
163447
163448
163449
163450
163451
163452
163453
163454
163455
163456
163457
163458
DNC-80-25-PPV
DNC-80-40-PPV
DNC-80-50-PPV
DNC-80-80-PPV
DNC-80-100-PPV
DNC-80-125-PPV
DNC-80-160-PPV
DNC-80-200-PPV
DNC-80-250-PPV
DNC-80-320-PPV
DNC-80-400-PPV
DNC-80-500-PPV
100
25
40
50
80
100
125
160
200
250
320
400
500
163479
163480
163481
163482
163483
163484
163485
163486
163487
163488
163489
163490
DNC-100-25-PPV
DNC-100-40-PPV
DNC-100-50-PPV
DNC-100-80-PPV
DNC-100-100-PPV
DNC-100-125-PPV
DNC-100-160-PPV
DNC-100-200-PPV
DNC-100-250-PPV
DNC-100-320-PPV
DNC-100-400-PPV
DNC-100-500-PPV
125
25
40
50
80
100
125
160
200
250
320
400
500
163511
163512
163513
163514
163515
163516
163517
163518
163519
163520
163521
163522
DNC-125-25-PPV
DNC-125-40-PPV
DNC-125-50-PPV
DNC-125-80-PPV
DNC-125-100-PPV
DNC-125-125-PPV
DNC-125-160-PPV
DNC-125-200-PPV
DNC-125-250-PPV
DNC-125-320-PPV
DNC-125-400-PPV
DNC-125-500-PPV
1)
18
The mounting nut on the piston rod thread is included in the scope of delivery
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Technical data
Ordering data – With position sensing
Piston 
Stroke
Part No.
[mm]
[mm]
Type1)
Piston 
[mm]
Stroke
[mm]
Part No.
Type1)
32
20
25
30
40
50
60
70
80
100
125
150
160
200
250
300
320
400
500
1922617
163305
1922618
163306
163307
1922619
1922620
163308
163309
163310
1922621
163311
163312
163313
1922622
163314
163315
163316
DNC-32-20-PPV-A
DNC-32-25-PPV-A
DNC-32-30-PPV-A
DNC-32-40-PPV-A
DNC-32-50-PPV-A
DNC-32-60-PPV-A
DNC-32-70-PPV-A
DNC-32-80-PPV-A
DNC-32-100-PPV-A
DNC-32-125-PPV-A
DNC-32-150-PPV-A
DNC-32-160-PPV-A
DNC-32-200-PPV-A
DNC-32-250-PPV-A
DNC-32-300-PPV-A
DNC-32-320-PPV-A
DNC-32-400-PPV-A
DNC-32-500-PPV-A
40
20
25
30
40
50
60
70
80
100
125
150
160
200
250
300
320
400
500
1922623
163337
1922624
163338
163339
1922625
1922626
163340
163341
163342
1922627
163343
163344
163345
1922628
163346
163347
163348
DNC-40-20-PPV-A
DNC-40-25-PPV-A
DNC-40-30-PPV-A
DNC-40-40-PPV-A
DNC-40-50-PPV-A
DNC-40-60-PPV-A
DNC-40-70-PPV-A
DNC-40-80-PPV-A
DNC-40-100-PPV-A
DNC-40-125-PPV-A
DNC-40-150-PPV-A
DNC-40-160-PPV-A
DNC-40-200-PPV-A
DNC-40-250-PPV-A
DNC-40-300-PPV-A
DNC-40-320-PPV-A
DNC-40-400-PPV-A
DNC-40-500-PPV-A
50
20
25
30
40
50
60
70
80
100
125
150
160
200
250
300
320
400
500
1922629
163369
1922630
163370
163371
1922631
1922632
163372
163373
163374
1922633
163375
163376
163377
1922634
163378
163379
163380
DNC-50-20-PPV-A
DNC-50-25-PPV-A
DNC-50-30-PPV-A
DNC-50-40-PPV-A
DNC-50-50-PPV-A
DNC-50-60-PPV-A
DNC-50-70-PPV-A
DNC-50-80-PPV-A
DNC-50-100-PPV-A
DNC-50-125-PPV-A
DNC-50-150-PPV-A
DNC-50-160-PPV-A
DNC-50-200-PPV-A
DNC-50-250-PPV-A
DNC-50-300-PPV-A
DNC-50-320-PPV-A
DNC-50-400-PPV-A
DNC-50-500-PPV-A
63
20
25
30
40
50
60
70
80
100
125
150
160
200
250
300
320
400
500
1922635
163401
1922636
163402
163403
1922637
1922638
163404
163405
163406
1922639
163407
163408
163409
1922640
163410
163411
163412
DNC-63-20-PPV-A
DNC-63-25-PPV-A
DNC-63-30-PPV-A
DNC-63-40-PPV-A
DNC-63-50-PPV-A
DNC-63-60-PPV-A
DNC-63-70-PPV-A
DNC-63-80-PPV-A
DNC-63-100-PPV-A
DNC-63-125-PPV-A
DNC-63-150-PPV-A
DNC-63-160-PPV-A
DNC-63-200-PPV-A
DNC-63-250-PPV-A
DNC-63-300-PPV-A
DNC-63-320-PPV-A
DNC-63-400-PPV-A
DNC-63-500-PPV-A
1)
The mounting nut on the piston rod thread is included in the scope of delivery
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
19
Standard cylinders DNC, ISO 15552
Technical data
Ordering data – With position sensing
Piston 
Stroke
Part No.
[mm]
[mm]
Type1)
80
20
25
30
40
50
60
70
80
100
125
150
160
200
250
300
320
400
500
1922641
163433
1922642
163434
163435
1922643
1922644
163436
163437
163438
1922645
163439
163440
163441
1922646
163442
163443
163444
DNC-80-20-PPV-A
DNC-80-25-PPV-A
DNC-80-30-PPV-A
DNC-80-40-PPV-A
DNC-80-50-PPV-A
DNC-80-60-PPV-A
DNC-80-70-PPV-A
DNC-80-80-PPV-A
DNC-80-100-PPV-A
DNC-80-125-PPV-A
DNC-80-150-PPV-A
DNC-80-160-PPV-A
DNC-80-200-PPV-A
DNC-80-250-PPV-A
DNC-80-300-PPV-A
DNC-80-320-PPV-A
DNC-80-400-PPV-A
DNC-80-500-PPV-A
100
25
40
50
80
100
125
160
200
250
320
400
500
163465
163466
163467
163468
163469
163470
163471
163472
163473
163474
163475
163476
DNC-100-25-PPV-A
DNC-100-40-PPV-A
DNC-100-50-PPV-A
DNC-100-80-PPV-A
DNC-100-100-PPV-A
DNC-100-125-PPV-A
DNC-100-160-PPV-A
DNC-100-200-PPV-A
DNC-100-250-PPV-A
DNC-100-320-PPV-A
DNC-100-400-PPV-A
DNC-100-500-PPV-A
125
25
40
50
80
100
125
160
200
250
320
400
500
163497
163498
163499
163500
163501
163502
163503
163504
163505
163506
163507
163508
DNC-125-25-PPV-A
DNC-125-40-PPV-A
DNC-125-50-PPV-A
DNC-125-80-PPV-A
DNC-125-100-PPV-A
DNC-125-125-PPV-A
DNC-125-160-PPV-A
DNC-125-200-PPV-A
DNC-125-250-PPV-A
DNC-125-320-PPV-A
DNC-125-400-PPV-A
DNC-125-500-PPV-A
1)
20
The mounting nut on the piston rod thread is included in the scope of delivery
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Technical data
Ordering data – Variable stroke
Piston 
Stroke
[mm]
[mm]
Without position sensing
Part No. Type1)
32
40
50
63
80
100
125
163318
163350
163382
163414
163446
163478
163510
1)
10 … 2000
10 … 2000
10 … 2000
10 … 2000
10 … 2000
10 … 2000
10 … 2000
DNC-32-…-PPV
DNC-40-…-PPV
DNC-50-…-PPV
DNC-63-…-PPV
DNC-80-…-PPV
DNC-100-…-PPV
DNC-125-…-PPV
The mounting nut on the piston rod thread is included in the scope of delivery
Ordering data – Variable stroke
Piston 
Stroke
[mm]
[mm]
With position sensing
Part No. Type1)
32
40
50
63
80
100
125
163304
163336
163368
163400
163432
163464
163496
1)
10 … 2000
10 … 2000
10 … 2000
10 … 2000
10 … 2000
10 … 2000
10 … 2000
DNC-32-…-PPV-A
DNC-40-…-PPV-A
DNC-50-…-PPV-A
DNC-63-…-PPV-A
DNC-80-…-PPV-A
DNC-100-…-PPV-A
DNC-125-…-PPV-A
The mounting nut on the piston rod thread is included in the scope of delivery
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
21
Standard cylinders DNC, ISO 15552
Ordering data – Modular products
0
M Mandatory data
Module No.
Function
Stroke
Piston j
163302
163334
163366
163398
163430
163462
163494
Order
example
163430
è
0
O Options
Cushioning
DNC
DNC
Position sensing
32
40
50
63
80
100
125
– 80
Protection against
rotation
10 … 2000
– 550
Type of piston rod
P
PPV
A
Q
– PPV
– A
– Q
Extended male
thread
S2
S20
– S2
40
50
63
80
100
125
0
M Module No.
163302
163334
163366
163398
163430
163462
163494
100
125
0
O Position sensing
Protection against rotation
Type of piston rod
Extended male thread
Female thread
Special thread
ê
Via proximity sensor
Square piston rod
Through piston rod
Through, hollow piston rod
Piston rod with extended male thread
[mm] 1 … 35
1 … 70
Piston rod with female thread
(M6)
(M8)
(M10)
(M10)
Piston rod with special thread
M10
M12
M16
M16
aE
PPV For piston  125 not with S11
2
Q
3
S2
K3
–
32
Standard cylinder, double-acting, based on ISO 15552
[mm] 32
40
50
63
80
[mm] 10 … 2000
Flexible cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends
Special thread
…K2
Ordering table
Size
Function
Piston 
Stroke
Cushioning
Female thread
– K3
Condi­
tions
–
…K5
–
Code
Enter
code
DNC
aE
DNC
-…
-…
-P
-PPV
2
3
4
-A
-Q
-S2
-S20
5
-…K2
(M12)
(M12)
(M16)
6
-K3
M20
M20
M27
7
-…K5
4
S20 Max. stroke: 850 mm.
In combination with S2: square piston rod at bearing cap end only.
5
K2
Not with K3, K10
Not with S20, K7, K10, S10, S11, R8
6
K3
With K5: on request.
7
K5
Max. stroke: 10 … 1500 mm.
Not with K2, K3, K5, K8, K10, S6, S10, S11, R8
In combination with K2: thread extended at both ends.
Not with K7
In combination with K3: female thread at both ends.
Not with K10
In combination with K5: special thread at both ends.
In combination with K8: piston rod extended at bearing cap end only.
Not with K7, S10, S11
Transfer order code
DNC
22
–
–
–
–
è Internet: www.festo.com/catalog/...
–
–
–
–
–
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Ordering data – Modular products
è 0
O Options
Special spanner flats
Improved running performance
Extended piston rod
K7
–
Temperature resistance
…K8
K10
– 100K8
Ordering table
Size
Running characteristics
S6
–
32
Slow speed
(constant
motion)
40
S11
–
50
Corrosion protection
S10
–
63
R3
–
80
100
–
125
ê Special spanner flats
0
O Extended piston rod
Piston rod with external hexagon
Extended piston rod
[mm] 1 … 500
Improved running performance Smooth anodised aluminium coated piston rod
Temperature resistance
Heat-resistant seals for temperatures up to 120 °C
Slow speed (constant motion)
Slow speed (constant motion at low piston speeds)
Running characteristics
Low friction
Corrosion protection
High corrosion protection
Wiper seal
Dust protection
8 K7
Not with Q, S2, K10
9 K10
Max. stroke: 1,000 mm.
aB S10
Not with S10, S11, R8
Transfer order code
–
2016/03 – Subject to change
–
–
Condi­
tions
Code
8
-K7
9
aJ
aB
aC
aD
-…K8
-K10
-S6
-S10
-S11
-R3
-R8
Enter
code
Max. stroke: 500 mm; additional strokes on request.
Max. stroke: 500 mm; additional strokes on request.
Not with R3, R8
aD CT, R3
–
–
R8
Not with S11, R3, R8
aC S11
Not with S6, R3, R8
aJ S6
Wiper seal
–
–
–
Not with R8
–
è Internet: www.festo.com/catalog/...
–
–
23
Standard cylinders DNC, ISO 15552
Ordering data
Wearing parts kits
Part No.
Piston 
32
40
50
63
80
100
125
24
Type
Part No.
Basic version
369195 DNC-32-…-PPV-(A)
369196 DNC-40-…-PPV-(A)
369197 DNC-50-…-PPV-(A)
369198 DNC-63-…-PPV-(A)
369199 DNC-80-…-PPV-(A)
369200 DNC-100-…-PPV-(A)
369201 DNC-125-…-PPV-(A)
è Internet: www.festo.com/catalog/...
Type
S6 – Heat-resistant seals up to max. 120 °C
384214
DNC-32-…-PPV-(A)-S6
384215 DNC-40-…-PPV-(A)-S6
384216 DNC-50-…-PPV-(A)-S6
384217 DNC-63-…-PPV-(A)-S6
384218 DNC-80-…-PPV-(A)-S6
384219 DNC-100-…-PPV-(A)-S6
384220 DNC-125-…-PPV-(A)-S6
Subject to change – 2016/03
Standard cylinders DNC-KP, standard hole pattern, with clamping unit
Technical data
-N-
Function
DNC-…-KP
Without position sensing
-T-W-
Diameter
32 … 125 mm
Stroke length
10 … 2000 mm
www.festo.com
Wearing parts kits
è 32
DNC-…-A-…-KP
With position sensing
-H-
Note
Additional measures are required for
use in safety-related applications; in
Europe, for example, the standards
listed under the EC Machinery
Directive must be observed. Without
General technical data
Piston 
Pneumatic connection
32
Cylinder
KP
Piston rod thread
Axial play under load
Constructional design
K3
K5
[mm]
Cushioning
Cushioning length PPV
Position sensing
Type of mounting
[mm]
Mounting position
Clamping type with effective direction
40
50
Gx
G¼
G¼
M5
Gx
Gx
M10x1.25
M12x1.25
M16x1.5
M6
M8
M10
M10
M12
M16
0.5
0.8
Piston
Piston rod
Profile barrel
Clamping unit
Flexible cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends
20
20
22
Via proximity sensor
Via female thread
Via accessories
Any
At both ends
additional measures in accordance
with statutory minimum require­
ments, the product is not suitable for
use in safety-related sections of
control systems.
63
80
100
125
Gy
Gx
M16x1.5
M10
M16
Gy
Gx
M20x1.5
M12
M20
G½
Gx
M20x1.5
M12
M20
G½
Gx
M27x2
M16
M27
1.8
22
32
32
42
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
Operating and environmental conditions
Operating medium
Note on operating/pilot medium
Operating pressure
[bar]
Min. release pressure
[bar]
Ambient temperature1)
[°C]
Corrosion resistance class CRC2)
Certification
1)
2)
Compressed air in accordance with ISO 8573­1:2010 [7:4:4]
Operation with lubricated medium possible (in which case lubricated operation will always be required)
1.5 … 10
3
–10 … +80
2
Germanischer Lloyd
Note operating range of proximity sensors
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
25
Standard cylinders DNC-KP, standard hole pattern, with clamping unit
Technical data
Impact energy [J]
Piston 
32
40
50
63
80
100
125
Max. impact energy at the end positions 0.1
0.2
0.2
0.5
0.9
1.2
5
vperm. +
Permissible impact velocity:
mload +
Maximum permissible load:
Forces [N]
Piston 
Theoretical force at 6 bar,
advancing
Theoretical force at 6 bar,
retracting
Static holding force
-H-
S2
S2
vperm.
Eperm.
mIntrinsic
mLoad
2xE perm.
mdead ) mload
Permissible impact velocity
Max. impact energy
Moving load (drive)
Moving effective load
2xEperm.
*mdead
v2
-H-
Note
This data represents the maximum
values that can be achieved. The
maximum permissible impact energy
must be observed.
32
40
50
63
80
100
125
483
415
415
415
600
754
633
633
633
1000
1178
990
990
990
1400
1870
1682
1682
1682
2000
3016
2721
2721
2721
5000
4712
4418
4418
4418
5000
7363
6881
6881
6881
7500
Note
The specified holding force refers to a
static load. If this value is exceeded,
slippage may occur. Dynamic forces
occurring during operation must not
26
Ǹ
exceed the static holding force. The
clamping unit is not backlash-free in
the clamped condition if varying
loads are applied to the piston rod.
è Internet: www.festo.com/catalog/...
Activation:
The clamping unit may only be
released if the forces at the piston
have reached equilibrium. Otherwise,
there is a risk of accidents due to
sudden movement of the piston rod.
Blocking off the air supply at both
ends (e.g. with a 5/3-way valve) does
not provide any safety.
Subject to change – 2016/03
Standard cylinders DNC-KP, standard hole pattern, with clamping unit
Technical data
Max. lateral force Fq as a function of stroke length l
Fq





32
40
50/63
80/100
125
Materials
Sectional view
2
3
1
2
4
7
5
6
Standard cylinder
1
2
3
4
5
6
7
–
Profile barrel
Bearing and end caps
Piston rod
Housing, clamping unit
Clamping jaws
Spring
Piston
Seals
Note on materials
2016/03 – Subject to change
Wrought aluminium alloy, smooth anodised
Die-cast aluminium
High-alloy steel
Wrought aluminium alloy, anodised
Brass
Spring steel
Polyacetal
Polyurethane, nitrile rubber
RoHS compliant
è Internet: www.festo.com/catalog/...
27
Standard cylinders DNC-KP, standard hole pattern, with clamping unit
Technical data
Download CAD data è www.festo.com
Dimensions – Basic version
1 For mounting attachments:
 32 … 100: Socket head
screw with female thread
 125: Thread in the end cap

2 Regulating screw for adjustable
end-position cushioning
3 Slot for proximity sensor
SME/SMT-8
+
= plus stroke length
AM
B

d11
BG
D1

f9
D2
E
EE
H1
J2
J3
KK
L2
L3
32
40
50
63
80
100
125
22
24
32
32
40
40
54
30
35
40
45
45
55
60
16
16
17
17
17
17
22
20
24
30
38
48
48
65
M5
Gx
Gx
Gx
Gx
Gx
Gx
45
54
64
75
93
110
134
Gx
G¼
G¼
Gy
Gy
G½
G½
67
88
107
123
165.5
174
207
6
8
10.4
12.4
12.5
12
13
5.2
6
8.5
10
8
10
8
M10x1.25
M12x1.25
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M27x2
94
105
106
121
128
138
160
45
53
67
76
95
98
125

L5
L7
MM

PL
RT
TG
VA
VD
WH
ZJ
ß1
ß2
ß3
14
16
20
24
31.5
31
42
3.3
3.6
5.1
6.6
10.5
8
14
12
16
20
20
25
25
32
15.6
14
14
17
16.4
18.8
18
M6
M6
M8
M8
M10
M10
M12
32.5
38
46.5
56.5
72
89
110
4
4
4
4
4
4
6
11.5
11.5
11
11
12.5
12
27.5
26
30
37
37
46
51
65
165
188
210
234
269
287
350
10
13
17
17
22
22
27
16
18
24
24
30
30
36
6
6
8
8
6
6
8
[mm]
[mm]
32
40
50
63
80
100
125
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
-H-
Note
The dimensions for the cylinder/
valve combination are on page
è 44
28
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC-KP, standard hole pattern, with clamping unit
Technical data
Download CAD data è www.festo.com
Dimensions – Variants
Q – Square piston rod
-H-
Note
Clamping unit and variant Q only in
combination with S2.
S2 – Through piston rod
+ = plus stroke length
++ = plus 2x stroke length
-H-
Note
The thread types at both piston rod
ends are identical.
In combination with variant Q,
the left-hand piston rod is round,
the right-hand piston rod square.
The clamping unit is mounted on
K2 – Extended male piston rod thread
K3 – Female piston rod thread
K5 – Special piston rod thread
K7 – Piston rod with external hexagon
the left-hand, round piston rod.
K8 – Extended piston rod
-H-
Note
In combination with variant S2, the
piston rod is extended at one end.
The clamping unit is mounted on the

A1
max.
A2
max.
AF
35
35
70
70
70
70
70
500
500
500
500
500
500
500
12
12
16
16
20
20
32
AM
B1
o
KF
10
12
16
16
20
20
–
M6
M8
M10
M10
M12
M12
M16
[mm]
32
40
50
63
80
100
125
1)
22
24
32
32
40
40
54
side of the piston rod that is not ex­
tended. If variant Q is also required,
KK
Basic
thread
Special
thread1)
M10x1.25
M12x1.25
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M27x2
M10
M12
M16
M16
M20
M20
M27
the extension will only be added to
the square piston rod.
T4
WH
ZJ
ZM
ß1
2.6
3.3
4.7
4.7
6.1
6.1
8
26
30
37
37
46
51
65
165
188
210
234
269
287
350
193
220
250
275
317
338
416
10
13
17
17
22
22
27
The special threads are only available as male threads. The mounting nut on the piston rod thread is included in the scope of delivery
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
29
Standard cylinders DNC-KP, standard hole pattern, with clamping unit
Ordering data – Modular products
0
M Mandatory data
è
0
O Options
Module No.
Function
Piston j
Stroke
Cushioning
Position
sensing
Protection
against
rotation
Type of piston
rod
163302
163334
163366
163398
163430
163462
163494
Order
example
163 430
DNC
32
40
50
63
80
100
125
10 … 2000
P
PPV
A
Q
S2
– PPV
– A
– Q
– S2
DNC
– 80
– 550
Ordering table
Size
32
40
50
63
80
100
125
0
M Module No.
163302
163334
163366
163398
163430
163462
163494
Function
Piston 
Stroke
Cushioning
Standard cylinder, double-acting, standard hole pattern, with clamping unit
[mm] 32
40
50
63
80
100
125
[mm] 10 … 2000
Flexible cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends
0
O Position sensing
Protection against rotation
ê Type of piston rod
1
Q
Condi­
tions
Via proximity sensor
Square piston rod
Through piston rod
1
2
–
2
Max. stroke: 10 … 1500 mm
S2
Code
Enter
code
DNC
-…
-…
-P
-PPV
DNC
-A
-Q
-S2
In combination with K2: extended thread at both ends
In combination with S2: square piston rod at bearing cap end only
In combination with K3: female thread at both ends
In combination with KP: only supplied with S2
In combination with K5: special thread at both ends
Not with K7
In combination with K8: piston rod extended at bearing cap end only
In combination with KP: clamping unit at end cap
Not with K7
Transfer order code
DNC
30
–
–
–
è Internet: www.festo.com/catalog/...
–
–
–
Subject to change – 2016/03
Standard cylinders DNC-KP, standard hole pattern, with clamping unit
Ordering data – Modular products
è 0
O Options
0
M
0
O
Extended male
thread
Female thread
Special thread
Special spanner
flats
Extended piston
rod
Clamping unit
Cylinder/valve
combination
…K2
K3
…K5
K7
…K8
KP
V1
V2
V3
V4
V5
V6
–
– K3
Ordering table
Size
–
32
–
40
50
– 100K8
63
80
100
– KP
125
ê Extended male thread
0
O
Female thread
Piston rod with extended male thread
[mm] 1 … 35
1 … 70
Piston rod with female thread
(M6)
(M8)
(M10)
(M10)
(M12)
(M12)
Special thread
Piston rod with special thread
M10
M12
M16
M16
M20
M20
Special spanner flats
Piston rod with external hexagon
Extended piston rod
Extended piston rod
[mm] 1 … 500
0
M Clamping unit
Attached
0
O Cylinder/valve combination
Single solenoid valve, fitted on right, piston rod retracted when unactuated
Single solenoid valve, fitted on right, piston rod advanced when unactuated
Double solenoid valve, fitted on right
Single solenoid valve, fitted on left, piston rod retracted when unactuated
Single solenoid valve, fitted on left, piston rod advanced when unactuated
Double solenoid valve, fitted on left
(M16)
–
Condi­
tions
Code
3
-…K2
4
-K3
M27
–
–
–
–
–
–
Enter
code
-…K5
-K7
5
6
6
6
6
6
6
3
K2
Not with K3
5
KP
Without S2: position of the clamping unit at the bearing cap
4
K3
With K5: on request
6
V…
Min. stroke: 100 mm
-…K8
-KP
-V1
-V2
-V3
-V4
-V5
-V6
-KP
Not with K7
Transfer order code
–
–
2016/03 – Subject to change
–
–
–
– KP
è Internet: www.festo.com/catalog/...
–
31
Standard cylinders DNC-KP, standard hole pattern, with clamping unit
Ordering data
Wearing parts kits
Part No.
Piston 
32
40
50
63
80
100
125
32
Type
Basic version
369195 DNC-32-…-PPV-(A)
369196 DNC-40-…-PPV-(A)
369197 DNC-50-…-PPV-(A)
369198 DNC-63-…-PPV-(A)
369199 DNC-80-…-PPV-(A)
369200 DNC-100-…-PPV-(A)
369201 DNC-125-…-PPV-(A)
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC-EL, standard hole pattern, with end-position locking
Technical data
-W-
Function
DNC-…-A-…-EL
With position sensing
www.festo.com
Wearing parts kits
è 24
-N-T-
Diameter
32 … 100 mm
-H-
Stroke length
10 … 2000 mm
Additional measures are required for
use in safety-related applications; in
Europe, for example, the standards
listed under the EC Machinery
Directive must be observed. Without
General technical data
Piston 
Pneumatic connection
Piston rod thread
Max. axial backlash with
end position locked
Constructional design
End-position locking
[mm]
ELB
ELV
ELH
Cushioning
Cushioning length PPV
[mm]
Position sensing
Type of mounting
Note
EL
Mounting position
additional measures in accordance
with statutory minimum require­
ments, the product is not suitable for
use in safety-related sections of
control systems.
32
40
50
63
80
100
Gx
M10x1.25
 1.3
G¼
M12x1.25
G¼
M16x1.5
Gy
M16x1.5
Gy
M20x1.5
 2.1
G½
M20x1.5
22
10.8
32
9.8
32
11.8
Piston
Piston rod
Profile barrel
At both ends
At front
At rear
Flexible cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends
20
20
22
8.2
8.3
7.3
Via proximity sensor
Via female thread
Via accessories
Any
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
-H-
Note
End-position locking should only
be operated in conjunction with
double-acting cylinders with
exhaust air flow control in order to
ensure that the lock is always com­
pletely released prior to starting
the drive movement.
2016/03 – Subject to change
No screws with a head or similar
may be used in place of endposition locking, as there is a risk
that the function will be impaired if
they are screwed in too deeply.
The exhaust hole must not be
closed.
Locking can be performed from any
stroke position once the drive is
brought mechanically into its end
position.
End-position locking has been
designed to prevent the load
dropping in case of pressure
failure.
è Internet: www.festo.com/catalog/...
An excessive end-position cushion­
ing setting (more than 50% closed)
can result in the locking bolt not
engaging reliably, resulting in
premature wear.
33
Standard cylinders DNC-EL, standard hole pattern, with end-position locking
Technical data
Operating and environmental conditions
Piston 
32
Operating medium
Note on operating/pilot medium
Operating pressure
[bar]
Ambient temperature1)
[°C]
Corrosion resistance class CRC2)
Certification
1)
2)
40
50
63
80
100
Compressed air in accordance with ISO 8573­1:2010 [7:4:4]
Operation with lubricated medium possible (in which case lubricated operation will always be required)
2.5 … 12
1.5 … 12
–20 … +80
2
Germanischer Lloyd
Note operating range of proximity sensors
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
Impact energy [J]
Piston 
32
40
50
63
80
100
Max. impact energy at the end positions 0.1
0.2
0.2
0.5
0.9
1.2
Permissible impact velocity:
Maximum permissible load:
vperm. +
mload +
Ǹ
2xE perm.
mdead ) mload
vperm.
Eperm.
mIntrinsic
mLoad
Permissible impact velocity
Max. impact energy
Moving load (drive)
Moving effective load
2xEperm.
*mdead
v2
-H-
Note
This data represents the maximum
values that can be achieved. The
maximum permissible impact energy
must be observed.
Forces [N]
Piston 
32
40
50
63
80
100
Theoretical force at 6 bar, advancing
Theoretical force at 6 bar, retracting
Static holding force
483
415
500
754
633
1178
990
2000
1870
1682
3016
2721
5000
4712
4418
Sizing example
-H-
Note
When sizing pneumatic cylinders it is
recommended as a basic principle
that only 50% of the indicated
theoretical forces (see above) be
used.
34
Given:
Installation position = Vertical
Workpiece load = 44 kg
F = m x g = 44 kg x 9.81 m/s2
= 431.6 N
To be calculated:
Suitable piston 
è Internet: www.festo.com/catalog/...
Example with 32 mm piston j:
Theoretical force at 6 bar, advancing = 483 N
50% of the theoretical force = 241.5 N
Static holding force with 32 mm piston  = 500 N
The static holding force of end-position locking is within the permissible range
(max. 500 N) with a workpiece load of 44 kg (431.6 N), however the cylinder
would be at 89% capacity.
Result:
A cylinder with a piston  of 40 mm is therefore recommended for this
application.
Subject to change – 2016/03
Standard cylinders DNC-EL, standard hole pattern, with end-position locking
Technical data
Max. lateral force Fq as a function of stroke length l
Fq




32
40
50/63
80/100
Weight [g]
Piston 
32
40
50
63
80
100
Basic version
Product weight with 0 mm stroke
Additional weight per 10 mm stroke
537
30
820
45
1320
64
1769
73
2970
106
4833
115
S2 – Through piston rod
Product weight with 0 mm stroke
Additional weight per 10 mm stroke
596
39
915
61
1450
89
1977
98
3294
144
5477
153
1
3
Materials
Sectional view
2
2
Standard cylinder
1
2
3
–
Profile barrel
Bearing and end caps
Piston rod
Seals
Note on materials
2016/03 – Subject to change
Wrought aluminium alloy, smooth anodised
Die-cast aluminium
High-alloy steel
Polyurethane, nitrile rubber
RoHS compliant
è Internet: www.festo.com/catalog/...
35
Standard cylinders DNC-EL, standard hole pattern, with end-position locking
Technical data
Download CAD data è www.festo.com
Dimensions – Basic version
1 Socket head screw with female
thread for mounting
attachments
2 Regulating screw for adjustable
end-position cushioning
3 Slot for proximity sensor
+
= plus stroke length
Download CAD data è www.festo.com
Dimensions – Variants
S2 – Through piston rod
+ = plus stroke length
++ = plus 2x stroke length

AM
B

d11
BG
D1

f8
D2
E
EE
G
H1
H2
J1
J2
J3
32
40
50
63
80
100
22
24
32
32
40
40
30
35
40
45
45
55
16
16
17
17
17
17
13
13
20
20
30
30
M3
M3
M5
M5
M5
M5
45
54
64
75
93
110
Gx
G¼
G¼
Gy
Gy
G½
25.1
29.6
29.6
35.6
35.9
38.8
57.5
64
78.5
84.5
104.5
113.5
70
74
93
93
116
116
22.5
27
32
37.5
46.5
55
6
8
10.4
12.4
12.5
12
5.2
6
8.5
10
8
10

L2
L3
L4
L7
MM

PL
RT
TG
VA
VD
WH
ZM
ZJ
ß1
ß2
ß3
94
105
106
121
128
138
13.8
16.6
17.1
16.6
19.9
22.8
12
16.6
17.1
16.6
19.9
22.8
3.3
3.6
5.1
6.6
10.5
8
12
16
20
20
25
25
15.6
14
14
17
16.4
18.8
M6
M6
M8
M8
M10
M10
32.5
38
46.5
56.5
72
89
4
4
4
4
4
4
10
10.5
11.5
15
15.7
19.2
26
30
37
37
46
51
148
167
183
199
222
240
120
135
143
158
174
189
10
13
17
17
22
22
16
18
24
24
30
30
6
6
8
8
6
6
[mm]
KK
L1
M10x1.25
M12x1.25
M16x1.5
M16x1.5
M20x1.5
M20x1.5
18
21.5
28
28.5
34.7
38.2
1
[mm]
32
40
50
63
80
100
±2
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
36
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC-EL, standard hole pattern, with end-position locking
Technical data
Download CAD data è www.festo.com
Dimensions – Variants
K2 – Extended male piston rod thread
K3 – Female piston rod thread
K5 – Special piston rod thread
K8 – Extended piston rod
-H-
Note
In combination with variant S2, the
piston rod is extended at one end.

A1
max.
A2
max.
AF
35
35
70
70
70
70
500
500
500
500
500
500
12
12
16
16
20
20
AM
KF
KK
Basic thread
Special
thread1)
M10x1.25
M12x1.25
M16x1.5
M16x1.5
M20x1.5
M20x1.5
M10
M12
M16
M16
M20
M20
[mm]
32
40
50
63
80
100
1)
22
24
32
32
40
40
M6
M8
M10
M10
M12
M12
T4
WH
ß1
2.6
3.3
4.7
4.7
6.1
6.1
26
30
37
37
46
51
10
13
17
17
22
22
The special threads are only available as male threads. The mounting nut on the piston rod thread is included in the scope of delivery
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
37
Standard cylinders DNC-EL, standard hole pattern, with end-position locking
Ordering data – Modular products
0
M Mandatory data
è
0
O Options
Module No.
Function
Piston j
Stroke
Cushioning
Position sensing
Type of piston rod
163302
163334
163366
163398
163430
163462
Order
example
163430
DNC
32
40
50
63
80
100
10 … 2000
P
PPV
A
S2
– PPV
– A
– S2
DNC
– 80
– 550
Ordering table
Size
32
40
50
63
80
100
0
M Module No.
163 302
163 334
163 366
163 398
163 430
163 462
Function
Piston 
Stroke
Cushioning
0
O Position sensing
ê Type of piston rod
1
S2
Condi­
tions
Standard cylinder, double-acting, standard hole pattern, with end-position locking
[mm] 32
40
50
63
80
100
[mm] 10 … 2000
Flexible cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends
Via proximity sensor
Through piston rod
Code
Enter
code
DNC
-…
-…
-P
-PPV
DNC
-A
-S2
1
In combination with K2: extended thread at both ends
In combination with K3: female thread at both ends
In combination with K5: special thread at both ends
Transfer order code
DNC
38
–
–
è Internet: www.festo.com/catalog/...
–
–
–
Subject to change – 2016/03
Standard cylinders DNC-EL, standard hole pattern, with end-position locking
Ordering data – Modular products
è 0
O Options
0
M
Extended male thread
Female thread
Special thread
Extended piston rod
End-position locking
…K2
K3
…K5
…K8
ELB
ELV
ELH
–
– K3
Ordering table
Size
32
ê Extended male thread
0
O
Female thread
Special thread
Extended piston rod
–
40
– 100K8
50
Piston rod with extended male thread
[mm] 1 … 35
1 … 70
Piston rod with female thread
(M6)
(M8)
(M10)
Piston rod with special thread
M10
M12
M16
Extended piston rod
[mm] 1 … 500
0
M End-position locking
2 K2
Not with K3
3 K3
With K5: on request
63
80
–
100
(M10)
(M12)
(M12)
M16
M20
M20
Condi­
tions
Code
2
-…K2
3
-K3
Enter
code
-…K5
-…K8
4
4
4
At both ends
At front
At rear
-ELB
-ELV
-ELH
4 ELB, ELV, ELH
In combination with K8 and S2: on request only
Transfer order code
–
2016/03 – Subject to change
–
–
–
è Internet: www.festo.com/catalog/...
–
39
Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination
Technical data
Function
DNC-…
Without position sensing
-N-T-W-
DNC-…-A-…
With position sensing
Diameter
32 … 100 mm
Stroke length
100 … 2000 mm
www.festo.com
Wearing parts kits
è 32
Valve variants
Single solenoid valve unactuated, piston rod retracted
Double solenoid valve unactuated, piston rod retracted
DNC-…-V1
fitted on right
DNC-…-V3
fitted on right
DNC-…-V4
fitted on left
DNC-…-V6
fitted on left
Single solenoid valve unactuated, piston rod advanced
-H-
Note
As viewed from the front of the
cylinder (piston rod end) with valve
fitted on left or right.
In this example, the valve is fitted
on the right.
DNC-…-V2
fitted on right
DNC-…-V5
fitted on left
40
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination
Technical data
General technical data
Piston 
32
Cylinder
Pneumatic connection
Piston rod thread
K3
K5
Constructional design
Cushioning
Cushioning length PPV
Position sensing
Type of mounting
[mm]
Mounting position
Valve
Valve used
single
solenoid
double
solenoid
Pneumatic connection
Constructional design
Type of mounting
Operating voltage
[V DC]
Power consumption
[W]
Duty cycle
Protection class with plug socket
40
50
Gx
G¼
G¼
M10x1.25
M12x1.25
M16x1.5
M6
M8
M10
M10
M12
M16
Piston
Piston rod
Profile barrel
Flexible cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends
20
20
22
Via proximity sensor
Via female thread
Via accessories
Any
63
80
100
Gy
M16x1.5
M10
M16
Gy
M20x1.5
M12
M20
G½
M20x1.5
M12
M20
22
32
32
Ordering data – Valves and accessories è 48
CPE24-M1H-5L-y
CPE14-M1BH-5L-x
CPE18-M1H-5L-¼
CPE14-M1BH-5J-x
CPE18-M1H-5J-¼
CPE24-M1H-5J-y
Gx
Piston spool valve
Via mounting kit
24 +10/–15%
1
100%
IP65
G¼
Gy
1.5
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
Operating and environmental conditions
Piston 
32
Operating medium
Note on operating/pilot medium
Operating pressure
[bar]
Ambient temperature1)
[°C]
Corrosion resistance class CRC2)
Certification
1)
2)
40
50
63
80
100
Compressed air in accordance with ISO 8573­1:2010 [7:4:4]
Operation with lubricated medium possible (in which case lubricated operation will always be required)
3…8
2.5 … 10
0 … +50
2
Germanischer Lloyd
Note operating range of proximity sensors
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
41
Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination
Technical data
Force [N] and impact energy [J]
Piston 
Theoretical force at 6 bar,
advancing
Theoretical force at 6 bar,
retracting
Max. impact energy
at the end positions1)
1)
S2/S20
S2/S20
32
40
50
63
80
100
483
415
415
415
0.1
754
633
633
633
0.2
1178
990
990
990
0.2
1870
1682
1682
1682
0.5
3016
2721
2721
2721
0.9
4712
4418
4418
4418
1.2
The permissible impact energy is reduced by approx. 10% for variants K10 and S20
Permissible impact velocity:
Maximum permissible load:
vperm. +
mload +
Ǹ
2xE perm.
mdead ) mload
vperm.
Eperm.
mIntrinsic
mLoad
Permissible impact velocity
Max. impact energy
Moving load (drive)
Moving effective load
2xEperm.
*mdead
v2
-H-
Note
This data represents the maximum
values that can be achieved. The
maximum permissible impact energy
must be observed.
Max. lateral force Fq as a function of stroke length l
Fq




42
è Internet: www.festo.com/catalog/...
32
40
50/63
80/100
Subject to change – 2016/03
Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination
Technical data
Materials
Sectional view
2
1
2
3
4
Standard cylinder
Basic version
1
2
3
Profile barrel
Bearing and end caps
Piston rod
Wrought aluminium alloy, smooth anodised
Die-cast aluminium
High-alloy steel
Tempered steel
High-alloy steel
–
Seals, cylinder
Polyurethane, nitrile rubber
Fluoro rubber
4
–
Housing, valve
Seals, valve
Note on materials
Die-cast aluminium, polyamide, steel
Nitrile rubber
RoHS compliant
2016/03 – Subject to change
R8
S10
S11
è Internet: www.festo.com/catalog/...
K10
Wrought aluminium
alloy, anodised
Polyurethane, nitrile
rubber
43
Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination
Technical data
Download CAD data è www.festo.com
Dimensions
1 Connecting cable not included
in scope of delivery
44
+½ = plus half stroke length
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination
Technical data

B1
B2
E1
H1
H2
L1
max.
L2
62
71
85
96
123
140
59
68
82
93
119
136
Gx
Gx
G¼
G¼
Gy
Gy
109 +5.5
114+5.5
131+5.5
142+5.5
194+5.5
213+2
86+5.5
94+5.5
104+5.5
115+5.5
133+5.5
158+2
152
152
215
215
242
242
22
23
24
25
28
30
[mm]
L3
L4
L5
ß1
ß2
102
102
138
138
165
165
118
118
163
163
165
165
13
13
25
25
25
25
13
17
17
19
19
27
14
14
14
14
17
17
±3
32
40
50
63
80
100
-H- Note: This product conforms to ISO 1179-1 and to ISO 228-1
-H-
Note
Additional dimensions relating to
the basic version and its variants
are provided on
page è 15,
with clamping unit on
page è 28.
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
45
Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination
Ordering data – Modular products
0
M Mandatory data
è
0
O Options
Module No.
Function
Piston j
Stroke
Cushioning
Position
sensing
Protection
against
rotation
Type of piston
rod
163302
163334
163366
163398
163430
163462
DNC
32
40
50
63
80
100
100 … 2000
P
PPV
A
Q
S2
S20
– PPV
– A
– Q
Order
example
163430
DNC
– 80
– 550
Ordering table
Size
32
40
50
63
80
100
0
M Module No.
163302
163334
163366
163398
163430
163462
Function
Piston 
Stroke
Cushioning
Q
Condi­
tions
Standard cylinder, double-acting, standard hole pattern, cylinder/valve combination
[mm] 32
40
50
63
80
100
[mm] 100 … 2000
Flexible cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends
0
O Position sensing
Protection against rotation
Type of piston rod
1
– S2
Via proximity sensor
Square piston rod
Through piston rod
Through, hollow piston rod
1
2
3
2
Max. stroke: 100 … 1500 mm
S2
Code
Enter
code
DNC
-…
-…
-P
-PPV
DNC
-A
-Q
-S2
-S20
In combination with K2: extended thread at both ends
In combination with S2: square piston rod at bearing cap end only
In combination with K3: female thread at both ends
In combination with KP: only supplied with S2
In combination with K5: special thread at both ends
Not with S20, K7, K10, S10, S11
In combination with K8: piston rod extended at bearing cap end only
In combination with KP: clamping unit at end cap
Not with S20, K7, S10, S11
3
S20 Max. stroke: 850 mm
Not with K2, K3, K5, K8, K10, KP, S10, S11
Transfer order code
DNC
46
–
–
–
è Internet: www.festo.com/catalog/...
–
–
–
Subject to change – 2016/03
Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination
Ordering data – Modular products
è 0
O Options
0
M
Extended
male
thread
Female
thread
Special
thread
Special
spanner
flats
Extended
piston rod
Improved
running
perform­
ance
Clamping
unit
Slow
speed
(constant
motion)
Running
character­
istics
Cylinder/valve
combination
…K2
K3
…K5
K7
…K8
K10
KP
S10
S11
V1
V2
V3
V4
V5
V6
–
–
–
Ordering table
Size
–
32
– 100K8
40
–
50
–
63
–
80
–
100
ê Extended male thread
0
O
Female thread
Piston rod with extended male thread
[mm] 1 … 35
1 … 70
Piston rod with female thread
(M6)
(M8)
(M10)
(M10)
Special thread
Piston rod with special thread
M10
M12
M16
M16
Special spanner flats
Piston rod with external hexagon
Extended piston rod
Extended piston rod
[mm] 1 … 500
Improved running performance Smooth anodised aluminium coated piston rod
Clamping unit
Attached
Slow speed (constant motion)
Slow speed (constant motion at low piston speeds)
Running characteristics
Low friction
0
M Cylinder/valve combination
4
K2
Not with K3, K10
5
K3
With K5: on request
K5
Not with K10
7
K7
Not with Q, S2, K10
Condi­
tions
Code
4
-…K2
(M12)
(M12)
5
-K3
M20
M20
6
7
-…K5
-K7
8
9
aJ
aA
-…K8
-K10
-KP
-S10
-S11
Single solenoid valve, fitted on right, piston rod retracted when unactuated
Single solenoid valve, fitted on right, piston rod advanced when unactuated
Double solenoid valve, fitted on right
Single solenoid valve, fitted on left, piston rod retracted when unactuated
Single solenoid valve, fitted on left, piston rod advanced when unactuated
Double solenoid valve, fitted on left
Enter
code
-V1
-V2
-V3
-V4
-V5
-V6
8
K10 Max. stroke: 1000 mm
9
KP
aJ
S10 Max. stroke: 500 mm; additional strokes on request
aA
S11 Max. stroke: 500 mm; additional strokes on request
Not with KP
Not with K7
6
– V2
Without S2: position of the clamping unit at the bearing cap
Not with S10, S11
Not with S11
–
Transfer order code
–
2016/03 – Subject to change
–
–
–
–
–
–
è Internet: www.festo.com/catalog/...
–
–
47
Standard cylinders DNC-V1 … V6, standard hole pattern, cyl./valve combination
Accessories
Technical data è Internet: cpe
Ordering data – Valves
For 
[mm]
Pneumatic
connection
Protection class
Part No.
Type
32
40
50
63
80
100
Gx
IP65
196941
CPE14-M1BH-5L-x
G¼
IP65
163142
CPE18-M1H-5L-¼
Gy
IP65
163166
CPE24-M1H-5L-y
32
40
50
63
80
100
Gx
IP65
196939
CPE14-M1BH-5J-x
G¼
IP65
163143
CPE18-M1H-5J-¼
Gy
IP65
163167
CPE24-M1H-5J-y
For valve
Part No.
Type
CPE14
CPE18
CPE24
153015
153018
153020
Technical data è Internet: quick star
QS-x-8-I
10
QS-¼-10-I
10
QS-y-12-I
10
Single solenoid
Double solenoid
Ordering data – Valve accessories
Push-in fitting QS
PU1)
CPE14
Cable length: 2.5 m
Cable length: 5 m
Technical data è Internet: nebv
8047679 NEBV-Z4WA2L-R-E-2.5-N-LE2-S1
1
8047680 NEBV-Z4WA2L-R-E-5-N-LE2-S1
CPE18
CPE24
Cable length: 2.5 m
Cable length: 5 m
Cable length: 10 m
151688
151689
193457
KMEB-1-24-2,5-LED
KMEB-1-24-5-LED
KMEB-1-24-10-LED
1
185705
ZVB-8-14/18
–
187388
ZVB-8-24
–
Connecting cable NEBV/KMEB
Mounting kit ZVB
CPE14
CPE18
CPE24
1)
48
Packaging unit quantity
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Accessories
Multi-position kit DPNC
Material:
Flange: Wrought aluminium alloy
Threaded studs, hex nuts:
Galvanised steel
Free of copper and PTFE
RoHS-compliant
+
Dimensions and ordering data
For 
F1
[mm]
-H-
Note
The maximum overall stroke length
must not be exceeded when com­
bining cylinders and multi-position
kits.
32
40
50
63
80
100
125
27
27
32
28
38
38
48
= plus stroke length
ZJ
Basic version
KP
Max.
overall stroke length
[mm]
120
135
143
158
174
189
225
165
188
210
234
269
287
350
1000
1000
1000
1000
1000
1000
1000
Weight
292
410
335
390
847
1200
2102
Part No.
Type
174418
174419
174420
174421
174422
174423
174424
DPNC-32
DPNC-40
DPNC-50
DPNC-63
DPNC-80
DPNC-100
DPNC-125
[g]
Connecting two cylinders with identical piston diameter as a 3 or 4-position cylinder
A 3 or 4-position cylinder consists of
two separate cylinders whose piston
rods advance in opposing directions.
To achieve 3 positions
This means that depending on actua­
tion and stroke division, this type of
cylinder can assume up to four
positions. In each case the cylinder is
driven precisely against a stop. Note
that when one end of the piston rod is
fixed, the cylinder barrel executes the
movement. The cylinder’s connections
must be flexible.
To achieve 4 positions
Two cylinders with identical stroke
length must be connected together.
Two cylinders with different stroke
lengths must be connected together.
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
49
Standard cylinders DNC, ISO 15552
Accessories
Foot mounting HNC/CRHNC
Material:
HNC: Galvanised steel
CRHNC: High-alloy steel
Free of copper and PTFE
+
Dimensions and ordering data
For 
AB
AH

[mm]
32
40
50
63
80
100
125
AT
TR
Basic version
KP
142
161
170
185
210
220
250
187
214
237
261
305
318
375
XA
KP
144
163
175
190
215
230
270
189
216
242
266
310
328
395
Type
Type
[mm]
High corrosion protection
CRC1)
Weight
Part No.
[g]
32
40
50
63
80
100
125
2
2
2
2
2
2
2
174369
174370
174371
174372
174373
174374
174375
HNC-32
HNC-40
HNC-50
HNC-63
HNC-80
HNC-100
HNC-125
4
4
4
4
4
4
4
CRHNC-32
CRHNC-40
CRHNC-50
CRHNC-63
CRHNC-80
CRHNC-100
CRHNC-125
139
188
341
424
809
990
1920
45
54
64
75
93
110
131
176937
176938
176939
176940
176941
176942
176943
XS
Basic version
Part No.
50
32
36
45
50
63
75
90
US
Basic version
CRC1)
Weight
[g]
1)
24
28
32
32
41
41
45
SA
6.5
9
9.5
12.5
15
17.5
22
144
193
353
436
829
1009
1902
4
4
5
5
6
6
8
AU
32
36
45
50
63
71
90
For 
7
10
10
10
12
14.5
16.5
AO
= plus stroke length
45
53
62
63
81
86
102
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
Corrosion resistance class CRC 4 to Festo standard FN 940070
Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor­
ted by special tests (è also FN 940082) using appropriate media.
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Accessories
Flange mounting FNC/CRFNG
+
= plus stroke length
Material:
FNC: Galvanised steel
CRFNG: High-alloy steel
Free of copper and PTFE
RoHS-compliant
Cannot be used on the bearing cap in
combination with the bellows kit
DADB
Dimensions and ordering data
For 
E
[mm]
32
40
50
63
80
100
125
For 
45
54
65
75
93
110
132
FB

H13
MF
7
9
9
9
12
14
16
10
10
12
12
16
16
20
R
32
36
45
50
63
75
90
TF
UF
64
72
90
100
126
150
180
80
90
110
120
150
175
210
W
ZF
DNC-…
DNC-…-KP
130
145
155
170
190
205
245
175
198
222
246
285
303
370
16
20
25
25
30
35
45
Part No.
Type
Corrosion resistant
CRC1)
Weight
[g]
Part No.
Type
[mm]
Basic version
CRC1)
Weight
[g]
32
40
50
63
80
100
125
1
1
1
1
1
1
1
174376
174377
174378
174379
174380
174381
174382
FNC-32
FNC-40
FNC-50
FNC-63
FNC-80
FNC-100
FNC-125
4
4
4
4
4
4
4
161846
161847
161848
161849
161850
161851
185363
CRFNG-32
CRFNG-40
CRFNG-50
CRFNG-63
CRFNG-80
CRFNG-100
CRFNG-125
1)
221
291
536
679
1495
2041
3775
220
291
526
680
1508
2054
3787
Corrosion resistance class CRC 1 to Festo standard FN 940070
Low corrosion stress. For dry indoor applications or transport and storage protection. Also applies to parts behind covers, in the non-visible interior area, and parts which are covered in the application (e.g. drive
trunnions).
Corrosion resistance class CRC 4 to Festo standard FN 940070
Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor­
ted by special tests (è also FN 940082) using appropriate media.
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
51
Standard cylinders DNC, ISO 15552
Accessories
Trunnion flange ZNCF/CRZNG
Material:
ZNCF: Special steel casting
CRZNG: Electrolytically polished
special steel casting
Free of copper and PTFE
RoHS-compliant
Cannot be used on the bearing cap in
combination with the bellows kit
DADB
+
Dimensions and ordering data
For 
C2
C3
[mm]
32
40
50
63
80
100
125
For 
71
87
99
116
136
164
192
86
105
117
136
156
189
217
= plus stroke length
TD

e9
TK
TL
TM
US
XH
12
16
16
20
20
25
25
16
20
24
24
28
38
50
12
16
16
20
20
25
25
50
63
75
90
110
132
160
45
54
64
75
93
110
131
18
20
25
25
32
32
40
Part No.
Type
Corrosion resistant
CRC1)
Weight
[g]
Part No.
Type
[mm]
Basic version
CRC1)
Weight
[g]
32
40
50
63
80
100
125
2
2
2
2
2
2
2
174411
174412
174413
174414
174415
174416
174417
ZNCF-32
ZNCF-40
ZNCF-50
ZNCF-63
ZNCF-80
ZNCF-100
ZNCF-125
4
4
4
4
4
4
4
161852
161853
161854
161855
161856
161857
185362
CRZNG-32
CRZNG-40
CRZNG-50
CRZNG-63
CRZNG-80
CRZNG-100
CRZNG-125
1)
52
150
285
473
687
1296
2254
3484
150
285
473
687
1296
2254
3484
XL
DNC-…
DNC-…-KP
128
145
155
170
188
208
250
173
198
222
246
283
306
375
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
Corrosion resistance class CRC 4 to Festo standard FN 940070
Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor­
ted by special tests (è also FN 940082) using appropriate media.
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Accessories
Trunnion mounting kit DAMT
for basic version DNC
The mounting kit can be attached at
any position along the profile barrel of
a cylinder.
Material:
Tempered steel
Free of copper and PTFE
= plus stroke length
+½ = plus half stroke length
1 Max. tightening torque
+ = plus stroke length
+½ = plus half stroke length
1 Max. tightening torque
+
for DNC-KP
Dimensions and ordering data
For 
B1
C2
C3
TD

e9
TL
TM
UW
71
87
99
116
136
164
192
86
105
117
136
156
189
217
12
16
16
20
20
25
25
12
16
16
20
20
25
25
50
63
75
90
110
132
160
65
75
95
105
130
145
175
[mm]
32
40
50
63
80
100
125
30
32
34
41
44
48
50
For 
XJ
XV
Max. tightening torque
[mm]
DNC-…
DNC-…-KP
DNC-…
DNC-…-KP
[Nm]
32
40
50
63
80
100
125
79.9
89.4
96.4
101.9
116.1
126.2
155.3
124.9
142.4
163.4
177.9
211.1
224.2
280.3
73
82.5
90
97.5
110
120
145
118
135.5
157
173.5
205
218
270
4+1
8+1
8+2
18+2
28+2
28+2
40+2
1)
CRC1)
Weight
XG
DNC-…
DNC-…-KP
66.1
75.6
83.6
93.1
103.9
113.8
134.7
111.1
128.6
150.6
169.1
198.9
211.8
259.7
Part No.
Type
2213233
2214899
2214909
2214971
163529
163530
163531
DAMT-V1-32-A
DAMT-V1-40-A
DAMT-V1-50-A
DAMT-V1-63-A
DAMT-V1-80-A
DAMT-V1-100-A
DAMT-V7-125-A
[g]
2
2
2
2
2
2
2
213
388
608
911
1494
2095
3013
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
53
Standard cylinders DNC, ISO 15552
Accessories
Trunnion support LNZG
Material:
Trunnion support:
Anodised aluminium
Plain bearing: Polymer
Free of copper and PTFE
RoHS-compliant
Dimensions and ordering data
For 
CR
DA
FK



[mm]
D11
H13
±0.1
32
40, 50
63, 80
100, 125
1)
12
16
20
25
11
15
18
20
FN
15
18
20
25
30
36
40
50
FS
10.5
12
13
16
H1
15
18
20
24.5
HB

H13
KE
6.6
9
11
14
6.8
9
11
13
NH
TH
UL
CRC1)
±0.2
18
21
23
28.5
32
36
42
50
Weight
Part No.
Type
32959
32960
32961
32962
LNZG-32
LNZG-40/50
LNZG-63/80
LNZG-100/125
[g]
46
55
65
75
2
2
2
2
83
129
178
306
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
Trunnion support CRLNZG
Material:
High-alloy steel
Free of copper and PTFE
RoHS-compliant
Dimensions and ordering data
For 
CR
FK


[mm]
D11
±0.1
32
40, 50
63, 80
100, 125
1)
54
12
16
20
25
15
18
20
25
FN
FS
H1
HB

H13
NH
30
36
40
50
10.5
12
13
16
15
18
20
24.5
6.6
9
11
14
18
21
23
28.5
TH
UL
CRC1)
46
55
65
75
4
4
4
4
±0.2
32
36
42
50
Weight
Part No.
Type
161874
161875
161876
161877
CRLNZG-32
CRLNZG-40/50
CRLNZG-63/80
CRLNZG-100
[g]
205
323
435
739
Corrosion resistance class CRC 4 to Festo standard FN 940070
Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor­
ted by special tests (è also FN 940082) using appropriate media.
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Accessories
Swivel flange SNC
Material:
Die-cast aluminium
Free of copper and PTFE
RoHS-compliant
+ = plus stroke length
1 The pivot pin is protected against rotation with a dowel pin.
Dimensions and ordering data
For 
CG
CP
[mm]
H14
h14
32
40
50
63
80
100
125
14
16
21
21
25
25
37
34
40
45
51
65
75
97
For 
1)
45 +0.2/–0.5
54–0.5
64–0.6
75–0.6
93–0.8
110+0.3/–0.8
131–0.8
TG
[mm]
32
40
50
63
80
100
125
E
32.5
38
46.5
56.5
72
89
110
EK

H9
FL
±0.2
10
12
16
16
20
20
30
22
25
27
32
36
41
50
CRC1)
XC
DNC-…
DNC-…-KP
142
160
170
190
210
230
275
187
213
237
266
305
328
400
Weight
L
SR
13
16
16
21
22
27
30
10
12
12
16
16
20
25
Part No.
Type
174383
174384
174385
174386
174387
174388
174389
SNC-32
SNC-40
SNC-50
SNC-63
SNC-80
SNC-100
SNC-125
[g]
2
2
2
2
2
2
2
93
140
234
331
618
865
1728
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
55
Standard cylinders DNC, ISO 15552
Accessories
Swivel flange
SNCB/SNCB-…-R3
Material:
SNCB: Die-cast aluminium
SNCB-…-R3: Die-cast aluminium with
protective coating
Free of copper and PTFE
RoHS-compliant
+
Dimensions and ordering data
For 
CB
[mm]
H14
H9/e8
EK

e8
32
40
50
63
80
100
125
26
28
32
40
50
60
70
45 +0.2/–0.5
54–0.5
64–0.6
75–0.6
93–0.8
110 +0.3/–0.8
131–0.8
10
12
12
16
16
20
25
For 
E
FL
±0.2
22
25
27
32
36
41
50
= plus stroke length
L
MR
13
16
16
21
22
27
30
TG
8.5
12
12
16
16
20
25
UB
32.5
38
46.5
56.5
72
89
110
XC
h14
DNC-…
DNC-…-KP
45
52
60
70
90
110
130
142
160
170
190
210
230
275
187
213
237
266
305
328
400
Part No.
Type
R3 – High corrosion protection
CRC1)
Weight
Part No.
[g]
Type
[mm]
Basic version
CRC1)
Weight
[g]
32
40
50
63
80
100
125
2
2
2
2
2
2
2
174390
174391
174392
174393
174394
174395
174396
SNCB-32
SNCB-40
SNCB-50
SNCB-63
SNCB-80
SNCB-100
SNCB-125
3
3
3
3
3
3
3
SNCB-32-R3
SNCB-40-R3
SNCB-50-R3
SNCB-63-R3
SNCB-80-R3
SNCB-100-R3
SNCB-125-R3
1)
56
103
155
232
375
636
1035
1860
100
151
228
371
632
986
1776
176944
176945
176946
176947
176948
176949
176950
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
Corrosion resistance class CRC 3 to Festo standard FN 940070
High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial
environment.
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Accessories
Swivel flange
SNCS/CRSNCS/SNCS-…-R3
Material:
SNCS 32 … 80: Die-cast aluminium
SNCS 100 … 125:
Wrought aluminium alloy
CRSNCS 32 … 80:
High-alloy stainless steel
SNCS-…-R3 100 … 125: Wrought alu­
minium alloy with protective coating
RoHS-compliant
+
Dimensions and ordering data
For 
CN

[mm]
DNC-…
DNC-…-R3
32
40
50
63
80
100
125
10
12+0.015
16+0.015
16+0.015
20+0.018
20+0.018
30+0.018
+0.013
For 
10+0.015/–0.04
12+0.018/–0.04
16+0.018/–0.04
16+0.018/–0.04
20+0.021/–0.04
20+0.021/–0.04
30+0.021/–0.04
E
DNC-…-R3
±0.2
45 +0.2/–0.5
54–0.5
64–0.6
75–0.6
93–0.8
109+1/–0.7
132+1/–0.7
45–0.5
54–0.5
64–0.6
75–0.6
93–0.8
109 +1/–0.7
132+1/–0.7
10.5
12
15
15
18
18
25
RA
EX
FL
DNC-…-R3
DNC-…
+1
DNC-…-R3
+1
15 +0.5
17+0.5
20+0.5
23–0.5
28–0.5
30±0.5
39±0.5
15 +0.5
17+0.5
20+0.5
22+0.5
27+0.5
30±0.5
39±0.5
14.5
17.5
18.5
23
25
95
100
14.5
17.5
19
23
25
100
100
LT
±0.2
14
16
21
21
25
25
37
22
25
27
32
36
41
50
TG
DNC-…
[mm]
For 
EP
DNC-…
MS
32
40
50
63
80
100
125
= plus stroke length
13
16
16
21
22
27
30
XC
DNC-…
DNC-…-KP
142
160
170
190
210
230
275
187
213
237
266
305
328
400
32.5
38
46.5
56.5
72
89
110
Part No.
Type
High corrosion protection
CRC1)
Weight
[g]
Part No.
Type
[mm]
Basic version
CRC1)
Weight
[g]
32
40
50
63
80
100
125
2
2
2
2
2
2
2
174397
174398
174399
174400
174401
174402
174403
SNCS-32
SNCS-40
SNCS-50
SNCS-63
SNCS-80
SNCS-100
SNCS-125
4
4
4
4
4
3
3
2895920
2895921
2895922
2895923
2895924
2895925
2895926
CRSNCS-32
CRSNCS-40
CRSNCS-50
CRSNCS-63
CRSNCS-80
SNCS-100-R3
SNCS-125-R3
1)
86
122
216
281
557
683
1369
161
239
403
576
1173
684
1369
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
Corrosion resistance class CRC 3 to Festo standard FN 940070
High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial
environment.
Corrosion resistance class CRC 4 to Festo standard FN 940070
Particularly high corrosion stress. Outdoor exposure under extreme corrosive conditions. Parts exposed to aggressive media, for instance in the chemical or food industries. These applications may need to be suppor­
ted by special tests (è also FN 940082) using appropriate media.
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
57
Standard cylinders DNC, ISO 15552
Accessories
Swivel flange SNCL
Material:
Die-cast aluminium
Free of copper and PTFE
RoHS-compliant
+
Dimensions and ordering data
For 
CD

[mm]
H9
32
40
50
63
80
100
125
For 
10
12
12
16
16
20
25
45 +0.2/–0.5
54–0.5
64–0.6
75–0.6
93–0.8
110 +0.3/–0.8
131–0.8
TG
[mm]
32
40
50
63
80
100
125
1)
58
E
32.5
38
46.5
56.5
72
89
110
= plus stroke length
EW
FL
–0.2/–0.6
±0.2
26
28
32
40
50
60
70
22
25
27
32
36
41
50
CRC1)
XC
DNC-…
DNC-…-KP
142
160
170
190
210
230
275
187
213
237
266
305
328
400
L
MR
13
16
16
21
22
27
30
10
12
12
16
16
20
25
Weight
Part No.
Type
174404
174405
174406
174407
174408
174409
174410
SNCL-32
SNCL-40
SNCL-50
SNCL-63
SNCL-80
SNCL-100
SNCL-125
[g]
2
2
2
2
2
2
2
71
95
158
225
436
606
1135
Corrosion resistance class CRC 2 to Festo standard FN 940070
Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­
sphere typical for industrial applications.
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Accessories
Ordering data – Mounting attachments
Designation
For 
Part No.
Type
Clevis foot LNG
Designation
For 
Technical data è Internet: clevis foot
Part No. Type
32
40
50
63
80
100
125
5561
5562
5563
5564
5565
5566
6987
LSN-32
LSN-40
LSN-50
LSN-63
LSN-80
LSN-100
LSN-125
Clevis foot LSN
32
40
50
63
80
100
125
33890
33891
33892
33893
33894
33895
33896
LNG-32
LNG-40
LNG-50
LNG-63
LNG-80
LNG-100
LNG-125
32
40
50
63
80
100
125
31740
31741
31742
31743
31744
31745
31746
LSNG-32
LSNG-40
LSNG-50
LSNG-63
LSNG-80
LSNG-100
LSNG-125
Clevis foot for welding LSNSG
32
40
50
63
80
100
125
31747
31748
31749
31750
31751
31752
31753
LSNSG-32
LSNSG-40
LSNSG-50
LSNSG-63
LSNSG-80
LSNSG-100
LSNSG-125
32
40
50
63
80
100
125
31761
31762
31763
31764
31765
31766
31767
LBG-32
LBG-40
LBG-50
LBG-63
LBG-80
LBG-100
LBG-125
Right-angle clevis foot LQG
32
40
50
63
80
100
125
31768
31769
31770
31771
31772
31773
31774
LQG-32
LQG-40
LQG-50
LQG-63
LQG-80
LQG-100
LQG-125
Clevis foot LSNG
Clevis foot LBG
Technical data è Internet: crlng
Type
Ordering data – Mounting attachments, corrosion-resistant
Designation
For 
Part No.
Clevis foot CRLNG
32
40
50
63
80
100
125
161840
161841
161842
161843
161844
161845
176951
Ordering – Mounting attachments, high corrosion protection
Designation
For 
Technical data è Internet: clevis foot
Part No.
Type
Clevis foot LBG-R3
32
40
50
63
80
100
125
2078790
2078792
2078794
2078795
2078797
2078799
2078837
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
CRLNG-32
CRLNG-40
CRLNG-50
CRLNG-63
CRLNG-80
CRLNG-100
CRLNG-125
LBG-32-R3
LBG-40-R3
LBG-50-R3
LBG-63-R3
LBG-80-R3
LBG-100-R3
LBG-125-R3
59
Standard cylinders DNC, ISO 15552
Accessories
Ordering data – Piston rod attachments
Designation
For 
Part No.
Type
Rod eye SGS
Designation
For 
Technical data è Internet: piston rod attachment
Part No.
Type
Rod clevis SGA
32
40
50
63
80
100
125
9261
9262
9263
SGS-M10x1,25
SGS-M12x1,25
SGS-M16x1,5
9264
SGS-M20x1,5
10774
SGS-M27x2
32
40
50
63
80
100
125
6144
6145
6146
SG-M10x1,25
SG-M12x1,25
SG-M16x1,5
6147
SG-M20x1,5
14987
SG-M27x2-B
32963
32964
32965
KSG-M10x1,25
KSG-M12x1,25
KSG-M16x1,5
32966
KSG-M20x1,5
32967
KSG-M27x2
157333
157334
160256
160257
AD-M10x1,25-x
AD-M10x1,25-¼
AD-M12x1,25-¼
AD-M12x1,25-y
Rod clevis SG
Coupling piece KSG
32
40
50
63
80
100
125
32
40
50
63
80
100
125
Self-aligning rod coupler FK
32
40
50
63
80
100
125
Coupling piece KSZ
32
40
50
63
80
100
125
32954
10767
10768
SGA-M10x1,25
SGA-M12x1,25
SGA-M16x1,5
10769
SGA-M20x1,5
10770
SGA-M27x2
6140
6141
6142
FK-M10x1,25
FK-M12x1,25
FK-M16x1,5
6143
FK-M20x1,5
10485
FK-M27x2
36125
36126
36127
KSZ-M10x1,25
KSZ-M12x1,25
KSZ-M16x1,5
36128
KSZ-M20x1,5
–
–
Adapter AD
32
40
Ordering data – Piston rod attachments, corrosion-resistant
Designation
For 
Part No.
Type
Designation
Rod eye CRSGS
Rod clevis CRSG
32
40
50
63
80
100
125
Self-aligning rod coupler CRFK
32
40
50
63
80
100
60
195582
195583
195584
CRSGS-M10x1,25
CRSGS-M12x1,25
CRSGS-M16x1,5
195585
CRSGS-M20x1,5
195586
CRSGS-M27x2
2305778
2305779
2490673
CRFK-M10x1,25
CRFK-M12x1,25
CRFK-M16x1,5
2545677
CRFK-M20x1,5
è Internet: www.festo.com/catalog/...
Technical data è Internet: crsg
Type
For 
Part No.
32
40
50
63
80
100
125
13569
13570
13571
CRSG-M10x1,25
CRSG-M12x1,25
CRSG-M16x1,5
13572
CRSG-M20x1,5
185361
CRSG-M27x2
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Accessories
Bellows kit DADB
General technical data
Type DADB-V6-
32
Max. cylinder stroke range1)
Type of mounting
Mounting position
Resistance to media
Ambient temperature2)
Protection class
Corrosion resistance class CRC3)
1)
2)
3)
[mm]
[°C]
40
50
63
10 … 500
10 … 500
10 … 500
10 … 500
Via threaded pin
Any
Dust, chips, oil, grease, fuel (è Internet: media resistance)
–10 … +80
IP54
3
80
100
10 … 500
10 … 500
In combination with the bellows kit DADB
Note operating range of proximity sensors and cylinder
Corrosion resistance class CRC 3 to Festo standard FN 940070
High corrosion stress. Outdoor exposure under moderate corrosive conditions. External visible parts with primarily functional requirements for the surface and which are in direct contact with a normal industrial
environment.
Materials
Sectional view
5
1
2
3
4
Bellows
1
2
3
4
5
–
Connection
Intermediate piece
Bellows
End piece
Connector
O-ring
Note on materials
Polyamide
Polyamide
Nitrile rubber
Polyamide
Polyamide
Nitrile rubber
Free of copper and PTFE
RoHS-compliant
Weight [g]
Type DADB-V6Stroke [mm]
32
40
50
63
80
100
10 … 50
51 … 125
126 … 175
176 … 250
251 … 300
301 … 350
351 … 375
376 … 425
426 … 475
476 … 500
29
41
52
66
79
92
92
104
117
117
42
56
68
85
100
115
115
129
144
144
71
91
105
129
147
166
167
185
204
205
69
89
103
127
145
164
165
183
202
203
99
127
140
193
231
268
259
296
334
324
124
152
165
218
255
293
284
321
359
349
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
61
Standard cylinders DNC, ISO 15552
Accessories
Travel velocity v as a function of tubing length l
The bellows kit is a leak-free system.
To prevent unwanted media being
drawn in, the supply and exhaust air
must be ducted via a pressure
compensation hole in the connection
1
Advancing
Note
The push-in fittings opposite must be
used for the pressure compensation
hole.
Silencers can also be used as an
alternative. This reduces the travel
velocity slightly.
62
and tubing length. The recommended
tubing length based on the travel
velocity of the drive can be read from
the graph.
Returning
 32/50/63
 40
-H-
part 1.
The pressure generated in the bellows
kit by the positioning motion is
primarily defined by travel velocity
 80/100
 32
 40
 50/63
 80/100
Tubing size and push-in fitting for pressure compensation hole

Tubing O.D.
Push-in fitting
[mm]
[mm]
Part No. Type
32, 40
8
50, 63, 80, 100
12
è Internet: www.festo.com/catalog/...
186109
578376
578362
186350
578344
578366
QS-Gx-8-I
NPQH-DK-G18-Q8-P10
QS-F-Gx-8H
QS-G¼-12
NPQH-D-G14-Q12-P10
NPQH-D-G14-S12-P10
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Accessories
Download CAD data è www.festo.com
Dimensions
+

Stroke
[mm]
A21)
10 … 50
51 … 125
126 … 175
176 … 250
251 … 300
301 … 350
351 … 375
376 … 425
426 … 475
476 … 500
29
47
61
80
96
112
114
130
145
147

Stroke
[mm]
A21)
10 … 50
51 … 125
126 … 175
176 … 250
251 … 300
301 … 350
351 … 375
376 … 425
426 … 475
476 … 500
28
46
56
73
86
97
105
116
126
134

Stroke
[mm]
A21)
10 … 50
51 … 125
126 … 175
176 … 250
251 … 300
301 … 350
351 … 375
376 … 425
426 … 475
476 … 500
25
37
49
62
74
86
87
98
110
111
1)
D1
max.
D2
32
EE
L1
L2
WH+A2
A21)
28
43
56
72
86
100
101
115
130
131
38
14
Gx
12.9
5.4
55
73
87
106
122
138
140
156
171
173
D1
max.
D2
50
EE
L1
L2
WH+A2
A21)
28
46
56
73
86
97
105
116
126
134
57
17
G¼
22.35
7
65
83
93
110
123
134
142
153
163
171
D1
max.
D2
80
EE
L1
L2
WH+A2
A21)
4
71
83
95
108
120
132
133
144
156
157
25
37
49
62
74
86
87
98
110
111
93
17
G¼
28
D1
max.
D2
40
EE
= plus stroke length
L1
L2
WH+A2
46
14
Gx
16.3
5.4
58
73
86
102
116
130
131
145
160
161
D1
max.
D2
63
EE
L1
L2
WH+A2
57
17
G¼
22.4
7
65
83
93
110
123
134
142
153
163
171
D1
max.
D2
100
EE
L1
L2
WH+A2
4
71
83
95
108
120
132
133
144
156
157
93
17
G¼
28
The dimension corresponds to the K8 value (extended piston rod) of the drive
2016/03 – Subject to change
è Internet: www.festo.com/catalog/...
63
Standard cylinders DNC, ISO 15552
Accessories
Ordering data – Bellows kit
An extended piston rod
(order code K8) is absolutely
necessary when using a bellows kit.
è Ordering data – Modular products.
Cylinder data

Stroke
The necessary dimension for K8 as a
function of piston diameter and
cylinder stroke as well as the
associated bellows kit is indicated in
the following table:
Order example:
Selected standard cylinder:
DNC-32-320-PPV-A-…
Dimension for the corresponding K8 value (see table):
112 mm
Complete type designation for the standard cylinder:
DNC-32-320-PPV-A-…-112K8
Associated bellows kit:
DADB-V6-32-S301-350
[mm]
[mm]
Bellows kit
Dimension Part No. Type
for K8
[mm]
32
10 … 50
51 … 125
126 … 175
176 … 250
251 … 300
301 … 350
351 … 375
376 … 425
426 … 475
476 … 500
29
47
61
80
96
112
114
130
145
147
553271
553273
553275
553277
553279
553281
553283
553285
553287
553289
DADB-V6-32-S10-50
DADB-V6-32-S51-125
DADB-V6-32-S126-175
DADB-V6-32-S176-250
DADB-V6-32-S251-300
DADB-V6-32-S301-350
DADB-V6-32-S351-375
DADB-V6-32-S376-425
DADB-V6-32-S426-475
DADB-V6-32-S476-500
40
10 … 50
51 … 125
126 … 175
176 … 250
251 … 300
301 … 350
351 … 375
376 … 425
426 … 475
476 … 500
28
43
56
72
86
100
101
115
130
131
553291
553293
553295
553297
553399
553301
553303
553305
553307
553309
DADB-V6-40-S10-50
DADB-V6-40-S51-125
DADB-V6-40-S126-175
DADB-V6-40-S176-250
DADB-V6-40-S251-300
DADB-V6-40-S301-350
DADB-V6-40-S351-375
DADB-V6-40-S376-425
DADB-V6-40-S426-475
DADB-V6-40-S476-500
50
10 … 50
51 … 125
126 … 175
176 … 250
251 … 300
301 … 350
351 … 375
376 … 425
426 … 475
476 … 500
28
46
56
73
86
97
105
116
126
134
553311
553313
553315
553317
553319
553321
553323
553325
553327
553329
DADB-V6-50-S10-50
DADB-V6-50-S51-125
DADB-V6-50-S126-175
DADB-V6-50-S176-250
DADB-V6-50-S251-300
DADB-V6-50-S301-350
DADB-V6-50-S351-375
DADB-V6-50-S376-425
DADB-V6-50-S426-475
DADB-V6-50-S476-500
63
10 … 50
51 … 125
126 … 175
176 … 250
251 … 300
301 … 350
351 … 375
376 … 425
426 … 475
476 … 500
28
46
56
73
86
97
105
116
126
134
553331
553333
553335
553337
553339
553341
553343
553345
553347
553349
DADB-V6-63-S10-50
DADB-V6-63-S51-125
DADB-V6-63-S126-175
DADB-V6-63-S176-250
DADB-V6-63-S251-300
DADB-V6-63-S301-350
DADB-V6-63-S351-375
DADB-V6-63-S376-425
DADB-V6-63-S426-475
DADB-V6-63-S476-500
80
10 … 50
51 … 125
126 … 175
176 … 250
251 … 300
301 … 350
351 … 375
376 … 425
426 … 475
476 … 500
25
37
49
62
74
86
87
98
110
111
553351
553353
553355
553357
553359
553361
553363
553365
553367
553369
DADB-V6-80-S10-50
DADB-V6-80-S51-125
DADB-V6-80-S126-175
DADB-V6-80-S176-250
DADB-V6-80-S251-300
DADB-V6-80-S301-350
DADB-V6-80-S351-375
DADB-V6-80-S376-425
DADB-V6-80-S426-475
DADB-V6-80-S476-500
100
10 … 50
51 … 125
126 … 175
176 … 250
251 … 300
301 … 350
351 … 375
376 … 425
426 … 475
476 … 500
25
37
49
62
74
86
87
98
110
111
553371
553373
553375
553377
553379
553381
553383
553385
553387
553389
DADB-V6-100-S10-50
DADB-V6-100-S51-125
DADB-V6-100-S126-175
DADB-V6-100-S176-250
DADB-V6-100-S251-300
DADB-V6-100-S301-350
DADB-V6-100-S351-375
DADB-V6-100-S376-425
DADB-V6-100-S426-475
DADB-V6-100-S476-500
64
è Internet: www.festo.com/catalog/...
Cylinder data

Stroke
[mm]
[mm]
Bellows kit
Dimension Part No. Type
for K8
[mm]
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Accessories
Ordering data – Guide units for fixed strokes (recirculating ball bearing guide only)
Stroke
Part No. Type
[mm]
Stroke
[mm]
Part No.
Technical data è Internet: feng
Type
For  32 mm
10 … 50
10 … 100
10 … 160
10 … 200
10 … 250
10 … 320
10 … 400
10 … 500
34493
34494
34495
34496
150289
34497
150290
34498
FENG-32-50-KF
FENG-32-100-KF
FENG-32-160-KF
FENG-32-200-KF
FENG-32-250-KF
FENG-32-320-KF
FENG-32-400-KF
FENG-32-500-KF
For  40 mm
10 … 50
10 … 100
10 … 160
10 … 200
10 … 250
10 … 320
10 … 400
10 … 500
34499
34500
34501
34502
34503
34504
150291
34505
FENG-40-50-KF
FENG-40-100-KF
FENG-40-160-KF
FENG-40-200-KF
FENG-40-250-KF
FENG-40-320-KF
FENG-40-400-KF
FENG-40-500-KF
For  50 mm
10 … 50
10 … 100
10 … 160
10 … 200
10 … 250
10 … 320
10 … 400
10 … 500
34506
34507
34508
34509
34510
34511
150292
34512
FENG-50-50-KF
FENG-50-100-KF
FENG-50-160-KF
FENG-50-200-KF
FENG-50-250-KF
FENG-50-320-KF
FENG-50-400-KF
FENG-50-500-KF
For  63 mm
10 … 50
10 … 100
10 … 160
10 … 200
10 … 250
10 … 320
10 … 400
10 … 500
34513
34514
34515
34516
34517
34518
34519
34520
FENG-63-50-KF
FENG-63-100-KF
FENG-63-160-KF
FENG-63-200-KF
FENG-63-250-KF
FENG-63-320-KF
FENG-63-400-KF
FENG-63-500-KF
For  80 mm
10 … 50
10 … 100
10 … 160
10 … 200
10 … 250
10 … 320
10 … 400
10 … 500
34521
34522
34523
34524
34525
34526
34527
34528
FENG-80-50-KF
FENG-80-100-KF
FENG-80-160-KF
FENG-80-200-KF
FENG-80-250-KF
FENG-80-320-KF
FENG-80-400-KF
FENG-80-500-KF
For  100 mm
10 … 50
10 … 100
10 … 160
10 … 200
10 … 250
10 … 320
10 … 400
10 … 500
34529
34530
34531
34532
34533
34534
34535
34536
FENG-100-50-KF
FENG-100-100-KF
FENG-100-160-KF
FENG-100-200-KF
FENG-100-250-KF
FENG-100-320-KF
FENG-100-400-KF
FENG-100-500-KF
Ordering data – Guide units for variable strokes
For 
Stroke
[mm]
[mm]
32
40
50
63
80
100
10 … 500
10 … 500
10 … 500
10 … 500
10 … 500
10 … 500
Ordering data – Mounting kits for proximity sensors SMT-8
For  [mm]
32
40
50
63
80
100
2016/03 – Subject to change
With recirculating ball bearing guide
Part No. Type
Technical data è Internet: feng
With plain-bearing guide
Part No. Type
34487
34488
34489
34490
34491
34492
34481
34482
34483
34484
34485
34486
FENG-32-…-GF
FENG-40-…-GF
FENG-50-…-GF
FENG-63-…-GF
FENG-80-…-GF
FENG-100-…-GF
Part No.
Technical data è Internet: smb
Type
175705
SMB-8-FENG-32/40
175706
SMB-8-FENG-50/63
175707
SMB-8-FENG-80/100
FENG-32-…-KF
FENG-40-…-KF
FENG-50-…-KF
FENG-63-…-KF
FENG-80-…-KF
FENG-100-…-KF
è Internet: www.festo.com/catalog/...
65
Standard cylinders DNC, ISO 15552
Accessories
Electrical connection
Cable length
[m]
Part No.
Technical data è Internet: smt
Type
Cable, 3-wire
Plug M8x1, 3-pin
Plug M12x1, 3-pin
Cable, 3-wire
Plug M8x1, 3-pin
2.5
0.3
0.3
2.5
0.3
574335
574334
574337
574338
574339
SMT-8M-A-PS-24V-E-2,5-OE
SMT-8M-A-PS-24V-E-0,3-M8D
SMT-8M-A-PS-24V-E-0,3-M12
SMT-8M-A-NS-24V-E-2,5-OE
SMT-8M-A-NS-24V-E-0,3-M8D
Cable, 3-wire
7.5
574340
SMT-8M-A-PO-24V-E-7,5-OE
Electrical connection
Cable length
[m]
Part No.
Technical data è Internet: sme
Type
Cable, 3-wire
Cable, 2-wire
Plug M8x1, 3-pin
Cable, 3-wire
Plug M8x1, 3-pin
2.5
5.0
2.5
0.3
2.5
0.3
543862
543863
543872
543861
150855
150857
SME-8M-DS-24V-K-2,5-OE
SME-8M-DS-24V-K-5,0-OE
SME-8M-ZS-24V-K-2,5-OE
SME-8M-DS-24V-K-0,3-M8D
SME-8-K-LED-24
SME-8-S-LED-24
Cable, 3-wire
7.5
160251
SME-8-O-K-LED-24
Electrical connection, right
Cable length
[m]
Part No.
Technical data è Internet: nebu
Type
Straight socket, M8x1, 3-pin
Cable, open end, 3-wire
Straight socket, M12x1, 5-pin
Cable, open end, 3-wire
Angled socket, M8x1, 3-pin
Cable, open end, 3-wire
Angled socket, M12x1, 5-pin
Cable, open end, 3-wire
2.5
5
2.5
5
2.5
5
2.5
5
541333
541334
541363
541364
541338
541341
541367
541370
NEBU-M8G3-K-2.5-LE3
NEBU-M8G3-K-5-LE3
NEBU-M12G5-K-2.5-LE3
NEBU-M12G5-K-5-LE3
NEBU-M8W3-K-2.5-LE3
NEBU-M8W3-K-5-LE3
NEBU-M12W5-K-2.5-LE3
NEBU-M12W5-K-5-LE3
Part No.
Type
151680
ABP-5-S
Ordering data – Proximity sensors for T-slot, magneto-resistive
Type of mounting
Switch
output
N/O contact
Insertable in the slot from above, flush
with cylinder profile, short design
PNP
NPN
N/C contact
Insertable in the slot from above, flush
with cylinder profile, short design
PNP
Ordering data – Proximity sensors for T-slot, magnetic reed
Type of mounting
Switching
output
N/O contact
Insertable in the slot from above, flush
with the cylinder profile
Contacting
Insertable in the slot lengthwise, flush
with the cylinder profile
Contacting
Insertable in the slot lengthwise, flush
with the cylinder profile
Contacting
N/C contact
Ordering data – Connecting cables
Electrical connection, left
Ordering data – Slot covers for T-slot
Assembly
Length
Insertable from
above
66
2x 0.5 m
è Internet: www.festo.com/catalog/...
Subject to change – 2016/03
Standard cylinders DNC, ISO 15552
Accessories
Ordering data – One-way flow control valves
Connection
Thread
Gx
G¼
Gy
G½
2016/03 – Subject to change
Material
Part No.
Technical data è Internet: grla
Type
Metal design
193142
193143
193144
193145
193146
193147
193148
193149
193150
193151
193152
GRLA-x-QS-3-D
GRLA-x-QS-4-D
GRLA-x-QS-6-D
GRLA-x-QS-8-D
GRLA-¼-QS-6-D
GRLA-¼-QS-8-D
GRLA-¼-QS-10-D
GRLA-y-QS-6-D
GRLA-y-QS-8-D
GRLA-y-QS-10-D
GRLA-½-QS-12-D
For tubing O.D.
3
4
6
8
6
8
10
6
8
10
12
è Internet: www.festo.com/catalog/...
67
Festo North America
1 Festo Canada
Headquarters
Festo Inc.
5300 Explorer Drive
0ississauga, O1
LW 5*
2 Montréal
5600, Trans-Canada
Pointe-Claire, QC
+95 1%6
3 Québec City
930, rue Watt11
Québec, QC
*1; *3
4 Festo United States
Headquarters
Festo Corporation
395 Moreland Road
+auppauge, 1<
11
5 Appleton
1orth 9 Tower 9iew Drive, Suite 1
Greenville, WI
59
7 'etroit
11 West Long Lake Road
Troy, MI
09
6 Chicago
5 W Algonquin - Suite 30
Arlington +eights, IL
60005
8 Silicon Valley
935 Southfront Road, Suite F
Livermore, CA
9550
Festo Regional Contact Center
Canadian Customers
Commercial Support:
Tel: 1 *O FESTO 1 3 3
Fax: 1 F; FESTO 1 393 3
Email: festocanada#cafestocom
Technical Support:
Tel:1 *O FESTO 1 3 3
Fax:1 F; FESTO1 393 3
Email: technicalsupport#cafestocom
USA Customers
Commercial Support:
Tel:1 00 99 FESTO 1 00 993 3
Fax:1 00 9 FESTO 1 00 93 3
Email: customerservice#usfestocom
Technical Support:
Tel:1 *O FESTO 1 3 3
Fax:100 9 FESTO1 00 93 3
Email: productsupport#usfestocom
SubMect to change
Internet: www.festo.com/us
Download