ICL-T6MH-2
JOB NAME
Pluris Multiple HID Ceramic Metal Halide Recessed Series
Trimless T6 G12 (2) Head
CATALOG NUMBER
NOTES
TYPE
6 7/16”
DISCONTINUED
7 5/8”
16 1/8”
6 3/8” 9 1/2”
16”
13 1/16”
16 1/4”
Cut-out: 7 9/16” x 13 7/8”
Order Matrix | Example: ICL-T6MH-2-39-WNF-SP-I200
A
B
A
Series
ICL-T6MH-2 (2) Lamp T6 G12 CMH
B
-20
-39
-70
C
Wattage
20W
39W
70W
C
D
D
-SP
-NFL
-FL
E
E
Reflector
15° Spot
25° Narrow Flood
45° Flood
Options
-I100 C-Channel Bar (pair)
-I200 Flat Bar (pair)
Finishes 1
-BNF Black Interior / Trimless
-WNF White Interior / Trimless
Notes:
1 - Consult factory for special order finishes
Color Filters
Diffusion Filters
PFL-CL1
PFL-CL2
PFL-CL3
PFL-CL7
Spread Lens
Linear Spread Lens
Sand Blasted Spread Lens
UV Lens
IP-CL-H2
Cross Louver
IP-CL-H2B
IP-CL-H2W
LAMP
T6 G12 20/39/70W for each lamp
SOCKET
G12
HOUSING
The inner trim is constructed of 22GA steel painted black, white or silver. The internal wire
bundles are locked and covered with a glass sleeve. The housing is supplied with a plate to
allow the junction box to be accessible from below the ceiling.
MOUNTING
The Pluris ™ luminaires can accommodate a ½” to 1 ¼” ceiling thickness. The Pluris ™
fixture is supplied with channel brackets that allow up-to 5” vertical adjustment. Universal
mounting brackets included. Compatible with C-channel, flat bar, and EMT. Bar hangers
must be ordered separately. C-channel are recommended for T-bar ceilings.
Accessories
ICL-T6MH will accommodate a maximum of (2) filter media per lamp.
No accessory holder required.
PL-CL5 Amber Lens
PL-CL6 Red Lens
PL-CL9 Blue Lens
DESCRIPTION
The Pluris ™ Series is designed for easy installation and fixture maintenance, with all parts
and components accessible from below the ceiling. All lamp holders are adjustable 360°
horizontal and 40° vertical for spot lighting in multiple directions. Actual adjustment may
vary depending on the lamp beam spread. The Pluris ™ Metal Halide series is offered with a
new construction frame and 1, 2, 3, or 4 lamp configurations.
Cross Louver, Black
Cross Louver, White
TRIMLESS
Perforated mesh frame provided, adheres to joint compound for seamless and trimless
mounting.
ELECTRONIC
Integral electronic ballast with 120/277V input. Junction box is ETL listed for through branch
wiring. Ballast is accessible through ceiling opening via access door on housing wall.
ACCESSORIES
Cross louver and filters available. Must order separately.
LISTING
ETL listed to US and Canadian standards for damp locations
PLURIS L/M-1013:15 P-43
Intense Lighting, LLC | 3340. E La Palma Ave. | Anaheim, CA 92806 | Phone: 1.800.961.5321 | Fax: 1.800.961.5322 | www.intenselighting.com
Note: Specifications and dimensions subject to change without notice.