INDC – Cubic Indirect TYPE • Hidden MR16 lamp in wall mount provides code-required emergency path of egress illumination • Round or square upper reflectors available • Integral ballast assembly in fixture for easy installation • Uses the Indirect Reflector System for IES cutoff classification • Tool-less access to integral ballast assembly • IP 66 rating • Lightweight aluminum composite upper reflector minimizes pole stress • Powder coat finish in 13 standard colors with a polymer primer sealer • Reflector tilts and locks at 0, 15 or 30 degrees 1. LUMINAIRE 2. REFLECTOR-UPPER 3. LAMP/BALLAST 4. COLOR 1. LUMINAIRE INDC Square straight, fixed head. 2. REFLECTOR – UPPER RD (30" round upper reflector) SQ (30" square upper reflector) SQ RD 3.LAMP/BALLAST LED (30 light emitting diode array, 33 watts. Warm white (3000K), Neutral white (4000K), Bright white (5000K), 120 thru 277 volt) 30LED-WW (Warm white) 30LED-NW (Neutral white) 30LED-BW (Bright white) COMPACT FLUORESCENT (GE F70QBX lamp. -10°C min start temp) CF METAL HALIDE (120/208/240/277 volt ballast) Medium base, ED-17 lamp 70MH 100MH G12 base, T-6 ceramic lamp 70MHT6 GX8.5 base, R111 lamp 70R111 ELECTRONIC METAL HALIDE (120 thru 277 volt ballast) Medium base, ED-17 lamp 150MHEB 70MHEB G12 base, T-6 ceramic lamp 150MHT6EB 70MHT6EB GX8.5 base, R111 lamp 70R111EB PULSE START METAL HALIDE (120/208/240/277 volt ballast) Medium base, ED-17 lamp 150PSMH G12 base, T-6 ceramic lamp 150PSMHT6 5. OPTIONS INDC SPECIFICATIONS 4. COLOR WH Arctic White BL Black BLT Matte Black DB Dark Bronze DGN Dark Green TT Titanium WDB Weathered Bronze MDB Bronze Metallic 6. MOUNTING VBU Verde Blue CRT Corten MAL Matte Aluminum MG Medium Grey AGN Antique Green LG Light Grey RAL Premium Color CUSTOM * * Contact Factory 5.OPTIONS CDC (Center deflector cone for round reflector. Provides a wider light distribution) SR (Two aluminum rings attached to the fixture. Factory installed) CFH (Color filter holder attached to the fixture includes solid rings. Factory installed) LAMP R111 (70 watt metal halide R111 reflector lamp) SCP (Sensor Control Programmable) pole accessory is available to provide occupancy detection for outdoor applications meeting California Title 24. For complete spec sheet and ordering information, visit www.aal.net/ products/sensor_control_programmable/ 6. MOUNTING – Must choose one WALL MOUNT WMA2 (10 lbs. Features built in MR16 egress (50 watt)) WMA2-NEG (10 lbs. No egress lamp. Blocked opening POLE MOUNT PMAT2 (Twin arm, slips over a 4"/100mm O.D. pole or tenon) PTS5 (Post top mount slips over a 2 3/8" O.D. round tenon 5"/127mm square pole) PTS4 (Post top mount slips over a 4"/100mm square pole) Visit www.aal.net for Arms, Poles & Accessories Specification Guide UPPER REFLECTOR The upper reflector shall be light weight aluminum composite. The reflector shall be finished in a white, fluoropolymer finish. The reflector shall be attached to the cast aluminum pivot joints and secured with four stainless steel bolts. Two cast aluminum, adjustable knuckles shall connect the reflector assembly to the vertical, stainless steel struts. The struts are #316 stainless steel with a minimum .075” wall thickness. The struts shall be clamped in place with 5/16-18 set screws for attachment to the upper reflector and the lamp module. LAMP MODULE The reflector shall be enclosed cast aluminum housing. The front cover is secured with four cap screws for re-lamping and internal access. The top glass element is clear, tempered glass. The top cover and electrical module are sealed with memory retentive, molded silicone gaskets. The parabolic reflector shall be pre-focused to illuminate the upper reflector with no stray light beyond the reflector. All internal and external hardware is stainless steel. HOUSING The post top model shall slip over a 4"/100mm pole on a 2 3/8" O.D. tenon or a 5"/127mm square pole. SAFETY The wall mounted luminaire (WMA-2) includes an integral secondary source to provide coderequired 1 footcandle emergency path-of-egress illumination from building to the public way. The hidden MR16 lamp, powered as a remote head, is able to be angled up to 15° in either direction. ELECTRICAL MODULE The ballast is mounted on a pre-wired plate with a quick disconnect plug. Magnetic metal halide ballasts are high power factor, rated for -30°C starting. Electronic metal halide ballasts are rated for -30°C starting, sound rating A, 120 thru 277 volt. Sockets are pulse rated porcelain for medium base ED-17; bi-pin, G12 for T-6 lamps; GX8.5 for R111. The compact fluorescent shall have an electronic transformer, 120 thru 277 volt. All ballasts are factory wired for 277 volts. Lamps not included (except LED options). See next page JOB TYPE ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 10.15 NOTES | 1 | FILENAME: INDC-RD-150MH.IES IESNA:LM-63-2002 [TEST] 24270 [TESTLAB] LIGHTING SCIENCES, INC. [ISSUEDATE] 01/06/09 [TESTDATE] 9/30/2008 TYPE [MANUFAC] ARCHITECTURAL AREA LIGHTING [LUMCAT] INDC-RD-150MH OR HEB [LUMINAIRE] CUBIC INDIRECT AJUSTABLE POST TOP LUMINAIRE; [MORE] UPPER REFLECTOR WHITE, LOWER REFLECTOR 2 [MORE] SPECULAR WITH CLEAR FLAT GLASS LENS DIMENSIONS [LAMP] ONE PHILIPS 150 WATT MH LAMP [LAMPCAT] MH150/U/M-PHILIPS [OTHER] LUMENS=12250; WITH SAIL SET AT 0 DEGREES device with a INDC – Cubic Indirect CONTROLS SCP shall have an integral surge protection currentt rating of 10,000 Amps using the industrySUMMARY standardDATA 8/20uSec wave and sure rating of 372J EFFICIENCY (Total): EFFICIENCY (Down / Up): Sensor not intended for use with additional photo-control, EFFICIENCY (Street / House): ROADWAY CLASSIFICATION: wireless control or dimming systems CUTOFF CLASSIFICATION: DATE RECORD DESN CHCK 30"/750mm 30.0 INDC WT: 45.9 lbs EPA: INDC-SQ Sail: 0° = 1.70 15° = 3.27 30° = 5.01 34.6 %B 33.5 % / 1.1 % 17.3 % / 17.3 % TYPE V, CUTOFF 12250 41.4"/1035mm 1 41.4 CIRCULAR 2.50 (Feet) 186 LUMENS/LAMP: FINISH NO. OF LAMPS: Fixture finish consists of a five stage pretreatmentLUMINOUS regimenOPENING: with a polymer primer sealer, oven dry off and top coated Diameter: INPUT WATTS: with a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA 605.2 performance CATALOG NUMBER: INDC-SQ-LED-30 specification which includes passing a 3000 hour salt FILENAME: INDC-SQ-LED-30.IES spray test for corrosion resistance. The reflector shall be IESNA:LM-63-2002 painted white. The lens frame shall be painted black to [TEST] 24693 further control any up light. The vertical struts are[TESTLAB] stainlessLIGHTING SCIENCES, INC. [ISSUEDATE] 01/12/09 steel. All other fixture parts shall be finished in the same [TESTDATE] 01/08/09 specified color. [MANUFAC] ARCHITECTURAL AREA LIGHTING CERTIFICATION The fixture shall be listed with wet location use, UL1598 and NO.250. IP=66 1 REV B 24.0 24"/600mm Photometric Report INDC-RD Sail: 0° = 1.46 15° = 2.89 30° = 4.28 A A CRITICAL DIMENSIONS This document contains confidential and proprietary information of Architectural Area Lighting, a division of Hubbell Lighting, Inc. (HLI). Receipt or possession of this document does not convey any rights to reproduce or disclose its contents, or to make, use , or sell anything it may disclose. Reproduction, disclosure, or use of the document or its contents, without the specific written authorization of HLI, may violate the intellectual property rights of HLI. UNSPECIFED TOLERANCES: INCHES X.X=u0.1 X.XX=u0.03 X.XXX=u0.010 FRACTIONS=u1/32 ANGULAR TOLERANCE=u1v DRAWN: DIMENSIONS IN INCHES DIMENSIONS IN [ ] IN MM Nora CONFORMS TO ASME Y14.5M CHECKED BY: 08/26/08 --- DO NOT SCALE PRINT --/--/-- ENGINEERING: INDC-PT MATERIAL: FINISH: PART NO. ----/--/-[LUMCAT] INDC-SQ-LED-30 SHT 1 - - 1 SHTS A [LUMINAIRE] CUBIC INDIRECT AJUSTABLE POST TOP LUMINAIRE; 2 1 [MORE] UPPER REFLECTOR WHITE, LOWER REFLECTOR ETL and U.L. for outdoor, [MORE] SPECULAR WITH CLEAR FLAT GLASS LENS INDC 150MH WATTAGE: 186 LUMEN OUTPUT: Canadian CSA Std.[LAMP] C22.2 30 LED'S ISO-ILLUMINANCE DIAGRAM (fc) [LAMPCAT] 30 1-W LED'S RATED AT 3000 INITIAL LUMENS [OTHER] OPERATING AT 120 VAC AND 37 WATTS WITH SAIL Name?:Finish SCALE CATALOG NO. SIZE DRAWING NO. - REV. PV:1 THIRD ANGLE PROJECTION 4241 B2 U3 G1 WARRANTY / TERMS AND CONDITIONS OF SALE SUMMARY DATA FORWARD LIGHT LUMEN Download: 10.6%% 450 EFFICIENCY (Total): FL30 o- 102032.6 http://www.hubbelllighting.com/resources/warranty/ EFFICIENCY (Down / Up): - 92509.4 % / - 9523.2 % 25.1% FM60 o- 80142.5 1064 % EFFICIENCY (Street / House): % / - 21889.9 11.2% FH80 oTYPE ROADWAY CLASSIFICATION: IV, VERY SHORT 474 CUTOFF CLASSIFICATION: NONCUTOFF FVH90 o-1 1.6% 67 LUMENS/LAMP: AAL reserves the right to change product specifications withoutNO. notice . OF LAMPS: 1 BACK LIGHT LUMINOUS OPENING: RECTANGULAR Width: (Feet) 450 BL30 o2.5010.6% Length: o2.50 BM60 0.0025.1% 1064 Height: o INPUT WATTS: BH80 37 11.2% 474 1.6% BVH90 o 67 UPLIGHT UL100 o UH180 o 0.2% 2.9% 7 125 0.02 0.05 0.01 0.2 0.51. 2. 0.1 B0 U2 G1 0.01 LUMEN 87 315 234 72 6.3% 12.7% 2.2% 0.1% 64 129 22 1 UPLIGHT UL100 o 4.4% o 4.9% UH180 45 50 Mounting 1.1% UPLIGHT Height Multiplier DOWNLIGHT 33.5% -----------------------10 15 20 25 30 35 40 45 50 4.000 1.778 1.000 0.640 0.444 0.327 0.250 0.198 0.160 + = Point of max candela Photometric Viewer v3.4 BACK LIGHT BL30 o BM60 o BH80 o BVH90 o EFFICACY: 22.8 Lm/W 14' MOUNTING Mounting Height =HEIGHT 20 Feet. Each box represents one mounting height. Reported data calculated from manufacturer's data file, based on IESNA recommended methods. INDC 30LED BW WATTAGE: 37 LUMEN OUTPUT: 1020 ISO-ILLUMINANCE DIAGRAM (fc) FORWARD LIGHT FL30 o 8.5% o 30.9% FM60 FH80 o 22.9% FVH90 o 7.1% Wednesday, July 11, 2012 0.02 0.05 0.1 0.2 EFFICACY: 27.6 Lm/W Mounting UPLIGHT 9.3% Height Multiplier DOWNLIGHT 90.7% -----------------------10 15 20 25 30 35 40 45 50 4.000 1.778 1.000 0.640 0.444 0.327 0.250 0.198 0.160 + = Point of max candela 14' MOUNTING Mounting Height =HEIGHT 20 Feet. Each box represents one mounting height. IES files can be found at www.aal.net Reported data calculated from manufacturer's data file, based on IESNA recommended methods. Photometric Viewer v3.4 ARCHITECTURAL AREA LIGHTING 16555 East Gale Ave. | City of Industry | CA 91745 P 626.968.5666 | F 626.369.2695 | www.aal.net Copyright © 2012 | REV 10.15 | 2 |