Program at a Glance
Date
Time
Oct.22
(Wed.)
10:00-17:30
18:00-20:00
8:30-10:00
10:00-10:30
10:30-12:00
12:00-14:00
14:00-15:30
15:30-16:00
16:00-17:30
8:30-10:00
10:00-10:30
10:30-12:00
12:00-14:00
14:00-15:30
15:30-16:00
Oct.23
(Thu.)
Oct.24
(Fri.)
16:00-17:30
Oct.25
(Sat.)
18:00-20:00
8:30-10:00
10:00-10:30
10:30-12:00
Room A
Room B
Room C
Room D
Room E
Room F
(Xiyuan 1) (Xiyuan 2) (Xiyuan 3) (Xiyuan 4) (Xiyuan 5) (Xiyuan 6)
Room G
Room H
Room I
(Grand Xixi Ballroom)
Registration (Lobby of the Sheraton Hangzhou Wetland Park Resort)
Welcome Reception
Open Ceremony, Keynote Speech -1
Coffee Break (Grand Xixi Ballroom foyer)
Keynote Speeches -2,3
Lunch (Restaurants @ Westbrook Resort)
LS1A
LS1B
LS1C
LS1D
LS1E
LS1F
ITS1
DS1H
Exhibition
ITS2
ISS1
DS2H
DS3H
Exhibition
Exhibition
ITS3
DS4H
Exhibition
ITS4
DS5H
Exhibition
Coffee Break (Grand Xixi Ballroom foyer)
LS2A
LS3A
LS2B
LS3B
LS2C
LS3C
LS2D
LS3D
LS2E
LS3E
LS2F
LS3F
Coffee Break (Grand Xixi Ballroom foyer)
LS4A
LS4B
LS4C
LS4D
LS4E
LS4F
Lunch (Restaurants @ Westbrook Resort)
LS5A
LS5B
LS5C
LS5D
LS5E
LS5F
Coffee Break (Grand Xixi Ballroom foyer)
LS6A
LS6B
LS6C
LS6E
LS6F
Exhibition
Banquet
Keynote Speeches -4,5
Coffee Break (Grand Xixi Ballroom foyer)
Keynote Speech -6, Closing Ceremony
Lecture Sessions (Oral)
LS1A
LS1B
LS1C
LS1D
LS1E
LS1F
LS2A
LS2B
LS2C
LS2D
LS2E
LS2F
LS3A
LS3B
LS3C
LS3D
LS3E
LS3F
PM Motor Drives 1
Induction Motor Drives 1
Traction Motors & Transportation 1
Renewable Energy Systems 1
Reluctances Machines 1
Special Machines and Actuators 1
PM Motor Drives 2
Induction Motor Drives 2
Traction Motors & Transportation 2
Renewable Energy Systems 2
Reluctances Machines 2
Special Machines and Actuators 2
PM Motor Drives 3
Induction Motor Drives 3
Power Converters 1
Renewable Energy Systems 3
Noise & Vibration, Manufacturing
Special Machines and Actuators 3
ISS1
Invited Speeches Session
ITS1~ITS4
Industry Technical Sessions
LS4A
LS4B
LS4C
LS4D
LS4E
LS4F
LS5A
LS5B
LS5C
LS5D
LS5E
LS5F
LS6A
LS6B
LS6C
LS6E
LS6F
PM Motor Drives 4
Induction Motor Drives 4
Power Converters 2
Renewable Energy Systems 4
Field Computation & Analysis 1
Machine Modeling and Design 1
PM Motor Drives 5
Synchronous Machines
Power Converters 3
Reliability & Diagnostics
Field Computation & Analysis 2
Machine Modeling and Design 2
PM Generator Systems
Sensorless Control Techniques
Power Converters 4
Field Computation & Analysis 3
Linear Machines and Magnetic Levitation
Dialogue Sessions (Poster)
DS1H
DS2H
DS3H
DS1H1
DS1H2
DS1H3
DS1H4
DS1H5
DS1H6
DS2H1
DS2H2
DS2H3
DS2H4
DS2H5
DS2H6
DS3H1
DS3H2
DS3H3
DS3H4
DS3H5
DS3H6
PM Motor Drives 1
Induction Motor Drives
Traction Motors & Transportation
Renewable Energy Systems 1
Synchronous Machines
PM Generator Systems
PM Motor Drives 2
Machine Modeling and Design
Sensorless Control Techniques
Renewable Energy Systems 2
Power Converters 1
Reliability & Diagnostics
PM Motor Drives 3
Special Machines and Actuators 1
Linear Machines and Magnetic Levitation 1
Renewable Energy Systems 3
Power Converters 2
Noise & Vibration, Testing
DS4H
DS5H
DS4H1
DS4H2
DS4H3
DS4H4
DS4H5
DS4H6
DS5H1
DS5H2
DS5H3
DS5H4
DS5H5
PM Motor Drives 4
Special Machines and Actuators 2
Linear Machines and Magnetic Levitation 2
Reluctance Machines
Power Converters 3
Field Analysis
PM Motor Drives 5
Special Machines and Actuators 3
Linear Machines and Magnetic Levitation 3
Thermal Analysis & Cooling
Power Converters 4
Poster Display and Removal
DS1H
DS2H
DS3H
DS4H
DS5H
Oct.23 (Thu.)
Oct.23 (Thu.)
Oct.24 (Fri.)
Oct.24 (Fri.)
Oct.24 (Fri.)
Poster Set-up
13:45 – 14:00
15:45 – 16:00
8:15 – 8:30
10:15 – 10:30
13:45 – 14:00
Presentation
14:00 – 15:30
16:00 – 17:30
8:30 – 10:00
10:30 – 12:00
14:00 – 15:30
Poster Removal
15:30 – 15:45
17:30 – 17:45
10:00 – 10:15
12:00 – 12:15
15:30 – 16:00
ICEMS2014 Keynote Speeches Schedule
Keynote Speech -1
Chairs:
Venue:
Oct. 23, 2014 (Thu.), 9:15-10:00 -
Prof. C. C. Chan, University of Hong Kong, Hong Kong; Institute for
Advanced Sustainability Studies, Germany.
Prof. Jacek F. Gieras, University of Technology and Life Sciences,
Poland; UTC Aerospace Systems, USA.
Grand Xixi Ballroom (Rooms G+H+I)
High Power Wind Generator Designs with Less or No PMs: an
Overview
Prof. Ion Boldea1, FIEEE, and Prof. Frede Blaabjerg2, FIEEE
1
University Politehnica of Timisoara, Timisoara, Romania.
ion.boldea@upt.ro
2
Aalborg University, Department of Energy Technology, Aalborg, Denmark.
fbl@et.aau.dk.
Abstract
The recent steep increase in high energy permanent magnet (PM) price (above
130$/kg and more) triggered already strong R&D efforts to develop wind
generators with less PMs (less weight in NdFeB magnets/kW or the use of ferrite
PMs) or fully without PMs. All these by optimizing existing dc excited
synchronous generators, by doubly-fed (wound rotor) induction and cage
induction generators and by introducing new topologies with pertinent costs for
high power (MW range) wind energy conversion units. The present overview
attempts, based on recent grid specifications, an evaluation of commercial and
novel wind generator systems with less or no PMs: from classifications based in
principle and on gear ratio, through topologies, modeling, design and performance
issues, with results from literature and also from authors findings. It is hoped that
such a study, focused on the wind generator itself (though considering the
interaction with the PWM converter in terms of power/speed range, losses, kVA,
and costs) rather than on the control issues which abound in literature, will be of
use for future R&D efforts in wind energy conversion, storage and use.
Keynote Speech -2
Chairs:
Venue:
Oct. 23, 2014 (Thu.), 10:30-11:15 -
Prof. Frede Blaabjerg, Aalborg University, Denmark.
Prof. Robert D. Lorenz, University of Wisconsin-Madison, WEMPEC,
USA.
Grand Xixi Ballroom (Rooms G+H+I)
Design of Permanent Magnet Brushless Motors for High Speed
Applications
Prof. Jacek F. Gieras, FIEEE
University of Technology and Life Sciences, Department of Electrical
Engineering, Bydgoszcz, Poland.
UTC Aerospace Systems, Applied Research Department, Rockford, Illinois, USA.
jgieras@ieee.org.
Abstract:
High speed motors that develop rotational speeds in excess of 5000 rpm are
necessary for centrifugal and screw compressors, blowers, grinding machines,
mixers, pumps, machine tools, textile machines, drills, handpieces, aerospace,
flywheel energy storages, etc. The actual trend in high speed electromechanical
drives technology is to use permanent magnet (PM) brushless motors, solid rotor
induction motors or switched reluctance motors. The highest efficiency and
highest power density is achieved with PM brushless motors.
Design guidelines for high speed PM brushless motors include:
•
compact design and high power density;
•
minimum number of components;
•
high efficiency over the whole range of variable speed;
•
power factor close to unity over the whole range of speed and load;
•
ability of the PM rotor to withstand high temperature (losses in retaining
sleeve);
•
optimal cost–to–efficiency ratio to minimize the system cost–output power
ratio;
•
high reliability (failure rate less than 5% within 80,000 h);
•
low cogging torque;
•
low total harmonics distortion (THD).
The following issues, which are essential in electromagnetic, mechanical and
thermal design of high speed PM brushless motors will be discussed:
•
Volume and mass: the higher the speed, the higher the power density;
•
Power losses and efficiency: special attention must be given to windage and
core losses;
•
Laminations: cobalt alloy, non-oriented silicon steel or amorphous alloy
laminations;
•
Stator windings: slotted or slotless windings
•
Stator conductors: small diameter stranded conductors or Litz wires;
•
Higher harmonics generated by the solid state converter: parasitical effect as
losses, vibration and noise depend on the harmonic content;
•
Cooling system: intensive air or liquid cooling system;
•
PM excitation system: if the temperature of the rotor or shaft exceeds 150oC,
SmCo PMs must be used;
•
Rotor tensile hoop stresses: properly selected rotor diameter, rotor
diameter–to–length ratio and rotor retaining sleeve (material and thickness);
•
Thermal compatibility of rotor materials: thermal expansions of the rotor
retaining sleeve and rotor core produce compressing stresses on PMs, fluctuating
with the temperature;
•
Rotor dynamics: the first critical speed of the rotor should be much higher or
much lower than the rated speed.
The keynote speech will be ended with examples of practical applications of high
speed PM motors and recent advances in their design.
Keynote Speech -3
Chairs:
Venue:
Oct. 23, 2014 (Thu.), 11:15-12:00 -
Prof. Frede Blaabjerg, Aalborg University, Denmark.
Prof. Robert D. Lorenz, University of Wisconsin-Madison, WEMPEC,
USA.
Grand Xixi Ballroom (Rooms G+H+I)
Renaissance and Global Development of Electric Vehicles
Prof. C. C. Chan, FREng, FIEEE, FIET, FHKIE, Academician of
Chinese Academy of Engineering
Honorary Professor, University of Hong Kong.
Senior Fellow, Institute for Advanced Sustainability Studies, Germany.
ccchan@eee.hku.hk.
Abstract:
To cope with the current complex economical, societal and technical challenges in
the new era, it is vital to be open-minded. Namely, to integrate the Chinese ancient
civilization and the western modern civilization, to uphold the spirit of
renaissance. Renaissance scientists and engineers are those not only understand
Why and How Things work but also on Why and How the World works. The
characters of renaissance scientists and engineers can be summarized as 1. Global
thinking instead of local thinking; 2. Circle thinking instead of linear thinking; 3.
Closed loop thinking instead of open loop thinking; 4. Life cycle thinking instead
of partial life thinking; and 5. Harmony thinking between human and nature. In
short, we should have all round universe perspectives. We should be open-minded.
We should promote the philosophy of engineering, which is system integration,
including vertical integration and horizontal integration.
The dawn of the commercialization of electric vehicles is coming. However, we
still need to pass through the remaining darkness to reach the morning mist and
the bright sunshine. With no doubt, electric vehicles will become a paradigm in
the new era. The success of commercialization of electric vehicles depends on the
satisfactory tackling of four factors: initial cost, convenience of use, energy
consumption and exhaust emission. Therefore, we need to pay further efforts
towards the following three fundamental enablers or three goodness factors:
1. Availability of good performance products at affordable cost;
2. Availability of good infrastructures that is efficient and friendly to use;
3. Availability of good business model to leverage the cost of barrier.
In this connection, we need to integrate the policy, industry and market. We need
the hand shake among key players in the automobile industry and the electric
power industry. Electric vehicle industry can be a disruptive industry, since the
function, production and commercial chain of electric vehicles are not at all the
same as conventional vehicles. In terms of function, electric vehicle is not only
just a transportation means, but also an electric device with moving energy storage
capability. Thus the integration of electric vehicles and smart gird, of electric
vehicles and information and communication technologies, is quite essential. Such
integration and collaboration should aim at gradually achieving the common goal
of four zeros: zero emission, zero gasoline, zero traffic accident, and zero traffic
jam. In this keynote speech, the global state of the art of electric vehicles, their
key technologies and infrastructures will be addressed.
Keynote Speech -4
Oct. 25, 2014 (Sat.), 08:30-09:15 -
Chairs:
Prof. Guobiao Gu, Institute of Electrical Engineering Chinese Academy
Venue:
of Sciences, China.
Prof. Dean J Patterson, Regal Beloit, Australia; University of Nebraska
Lincoln, USA.
Grand Xixi Ballroom (Rooms G+H+I)
Small Actuators: a Multi-Disciplinary Approach and a Strong Link
with Industry
Prof. Yves Perriard
Ecole Polytechnique Fédérale de Lausanne (EPFL), Switzerland.
yves.perriard@epfl.ch.
Abstract:
The evolution of what is called small mechatronic systems took a more and more
important dimension for these last ten years. Nowadays, the number of actuators,
sensors increases fast in a lot of fields. The development of these future systems
requires a sustained research of high level to allow a miniaturization of these
elements for one thing and an increased autonomy by means of "smart"
electronics on the other hand. Energy saving is also a key issue for our future
which is also strongly dependent of devices efficiency, even for small power
consumption. Connections with material science and information technology are
the key for innovation in this topic. Existing technologies must be used in an
unconventional use to create innovations. The proposed keynote intends to show
some examples of multi-disciplinary projects and shows how to combine some
exiting technologies in a smart way. The link with industries will be highlighted as
a common thread in all breakthrough innovations. Haptic devices, sensorless
electronic for brushless motor, MEM’s electromechanical motor as well as liquid
actuator will be highlighted during this presentation.
Keynote Speech -5
Oct. 25, 2014 (Sat.), 09:15-10:00 -
Chairs:
Prof. Guobiao Gu, Institute of Electrical Engineering Chinese Academy
Venue:
of Sciences, China.
Prof. Dean J Patterson, Regal Beloit, Australia; University of Nebraska
Lincoln, USA.
Grand Xixi Ballroom (Rooms G+H+I)
State of The Art of Large Permanent Magnet Machines
Prof. Robert Nilssen
The Norwegian University of Science and Technology, Norway.
robert.nilssen@ntnu.no.
Abstract:
This keynote speech will firstly overview the history of large electrical machines,
from moderate sizes to very large units in ship propulsion and wind generators. It
will then include the trends and changes which are seen in industrial applications,
together with new applications as a consequence of a new freedom of design with
new and powerful NdFeB magnets. Numerous examples will be given, such as
some new types of designs for high pole number electrical machines with
concentrated coils, fractional slot windings and multilayer windings for low speed
and large torque applications.
Keynote Speech -6
Chairs:
Venue:
Oct. 25, 2014 (Sat.), 10:30-11:15 -
Dr. Blake Lloyd, IEEE-IAS, Iris Power, Canada.
Prof. Longya Xu, Ohio State University, USA.
Grand Xixi Ballroom (Rooms G+H+I)
Overview of Recent Advances in Innovative Electrical Machines
Prof. Z. Q. Zhu, FIEEE, FIET
University of Sheffield, UK. z.q.zhu@shef.ac.uk.
Abstract:
Electrical machines have been widely used for many applications, ranging from
electric and hybrid electric vehicles, renewable energy including wind power
generators, more electric aircrafts, industrial drives, automations, to domestic
appliances etc. Many new electrical machine technologies are still developing,
particularly novel machine topologies.
This keynote speech systematically overviews the recent developments in
innovative permanent magnet machines, switched reluctance machines,
synchronous reluctance machines, and wound field machines.
The emphasis will focus on recent advances in various new doubly salient
electrical machines and magnetically geared machines, including (1) stator PM
machines such as doubly salient, flux reversal, and switched flux PM machines; (2)
switched reluctance machines and variable flux reluctance machines; (3) stator
PM biased reluctance machines and stator wound field switched flux machines; (4)
hybrid excitation variable flux machines and memory machines; as well as (5)
various magnetic gears; (6) novel dual-airgap/dual-rotor, dual-airgap/single-rotor,
single-airgap/single-rotor magnetically geared PM machines and vernier PM
machines.
The unique relationships between these electrical machines and magnetically
geared machines will be systematically revealed, resulting in the recent
development of a new class of magnetically geared switched flux machines, which
will be illustrated by many examples.
ICEMS2014 Invited Speeches Schedule
Invited Speech -1
(ISS1-1)
Oct. 24, 2014 (Fri.), 8:30-9:15 -
Chairs: Prof. Yves Perriard, Ecole Polytechnique Fédérale de Lausanne (EPFL),
Switzerland.
Prof. Robert Nilssen, The Norwegian University of Science and
Venue:
Technology, Norway.
Room G
How Big Must an Electric Machine Be? –Development of Axial
Flux Permanent Magnet Machines
Prof. Dean J Patterson
Regal Beloit, Australia; University of Nebraska Lincoln, USA;
patterson@ieee.org
B Kennedy, R Rohoza, M Turner, M Smith
Regal Beloit, Australia
Abstract:
This paper begins with the very famous discussion of the “goodness” of electrical
machines published by Professor Eric Laithwaite in the 1960s. He felt he could
prove that there were some very fundamental physical principles that implied that
as electric machines got large, they could use material more effectively, and were
easier to design. On the contrary, as they got smaller, the reverse happened. It
turns out that he was absolutely right for induction machines. A relatively recent
set of measurements on currently available induction machines will be presented
which reinforce his result.
However he did not envisage the 2 fold impact of rare earth permanent magnets
(PMs) on machine design. Firstly it will be demonstrated, with a range of early
designs as examples, that PM machines are nowhere near as subject to size
determined performance enhancements or degradations.
The second impact is more subtle. PMs enabled the practical construction of axial
flux permanent PM machines. Axial flux induction machines were tried, but were
never competitive, because good induction motor designs require a very small
airgap. Rare earth PMs have released us from this particularly stringent and
limiting condition. When adopted, axial flux technology has led to a significant
reduction in machine size across a broad range of power ratings. Some early
designs for solar car racing drives and starter alternators for internal combustion
engines will be shown and discussed to demonstrate not only freedom from the
constraint of “goodness”, but also a significant increase in achievable torque
density.
In the last seven years in Regal Beloit we have put into large scale production a
number of axial flux machines all demonstrating a reasonably consistent high
torque density from small to large. Incidentally, partly because of the low volume,
but primarily because of some special features of the specific geometry of single
sided actual flux machines, these all use significantly less active material than the
standard radial flux inside rotor machine. Thus these are proving to result in
significantly reduced costs.
Three machines in production will be explored in some detail and some recent
developments explored.
Invited Speech -2
(ISS1-2)
Oct. 24, 2014 (Fri.), 9:15-10:00-
Chairs: Prof. Yves Perriard, Ecole Polytechnique Fédérale de Lausanne (EPFL),
Switzerland.
Prof. Robert Nilssen, The Norwegian University of Science and
Venue:
Technology, Norway.
Room G
The 4QT Concept for Electric Hybrid Vehicles – from Invention to
Implementation in a Demonstration Vehicle
Prof. Chandur Sadarangani
Laboratory of Electrical Energy Conversion (E2C), Department of Electrical
Engineering, Kungliga Tekniska Högskolan (KTH), Stockholm, Sweden.
chandur@ee.kth.se
Abstract
The 4QT is a power split hybrid concept that is built on 2 rotating rotors, an inner
rotor that contains a 3-phase winding and is mechanically connected to the
internal combustion engine (ICE) and an outer rotor that is mounted with
permanent magnets both in the inner and outer surfaces and that is mechanically
connected to the wheel via a suitable gearbox. The magnets in the inner surface
work with the rotating winding in the inner rotor that is fed from the batteries via
slip rings/brushes to handle the speed difference between the ICE and wheel while
the magnets on the outer surface work with windings on an outer stator to handle
the torque difference. The 4QT concept is thus a compact solution that allows the
ICE to operate at an optimal operating point that is independent of the torque and
speed at the wheel.
The presentation will cover a period between 1993 when the concept was first
invented to 2008 when the system was implemented and tested in a bus
demonstrating the potential of the system at the same time revealing some of the
challenges that a researcher experiences in the practical implementation of a
theoretical concept.
ICEMS2014 Industrial Technical Sessions Schedules
Industrial Technical Sessions 1 (ITS1-1) Oct. 23, 2014 (Thu.), 14:00-14:45Chair:
Venue:
Prof. Dan Sun, Zhejiang University, China.
Room G
Development of PMSM Drive System for Low-cost Electric Vehicle
Mr. Tao Hong, Hangzhou Easitech Co., Ltd., China.
Industrial Technical Sessions 1 (ITS1-2) Oct. 23, 2014 (Thu.), 14:45-15:30Chair:
Venue:
Prof. Dan Sun, Zhejiang University, China.
Room G
Control Scheme of Synchronous Reluctance Motor with Danfoss
Converter
Mr. Jiaqin Huang, Danfoss Automatic Controls Management (Shanghai) Co.,
Ltd., China.
Industrial Technical Sessions 2 (ITS2-1) Oct. 23, 2014 (Thu.), 16:00-16:45Chair:
Venue:
Dr. Weizhong Fang, Hangzhou Easitech Co., Ltd., China.
Room G
Thermal models of Different Order from a few Nodes to Thousands
of Elements
Mr. Yew Chuan (Eddie) Chong, Motor Design Limited, UK.
Industrial Technical Sessions 2 (ITS2-2) Oct. 23, 2014 (Thu.), 16:45-17:30Chair:
Venue:
Dr. Weizhong Fang, Hangzhou Easitech Co., Ltd., China.
Room G
Research and Development on Electrical Machine and Drive
Technology
Mr. Weican Yan, Wolong Electric Group Co., Ltd., China.
Industrial Technical Sessions 3 (ITS3-1) Oct. 24, 2014 (Fri.), 10:30-11:15Chair:
Venue:
Dr. Weizhong Fang, Hangzhou Easitech Co., Ltd., China.
Room G
Advanced Techniques for the Simulation of Electrical Machines
and Drives
Mr. Shiwei Li, ANSYS, USA.
Industrial Technical Sessions 3 (ITS3-2) Oct. 24, 2014 (Fri.), 11:15-12:00Chair:
Venue:
Dr. Weizhong Fang, Hangzhou Easitech Co., Ltd., China.
Room G
A New Type Power Analyzer Bring the Innovation of Motor
Testing Precision and Analysis Ability
Mr. Haoben Ye, Guangzhou Zhiyuan Electronics Stock Co., Ltd., China.
Industrial Technical Sessions 4 (ITS4-1) Oct. 24, 2014 (Fri.), 14:00-14:30Chair:
Venue:
Prof. Wei Zhang, Zhejiang University, China.
Room G
Integrated Design of Electric Machine and Drive System
Mr. Jianfeng Wang, Hangzhou Easitech Co., Ltd., China.
Industrial Technical Sessions 4 (ITS4-2) Oct. 24, 2014 (Fri.), 14:30-15:00Chair:
Venue:
Prof. Wei Zhang, Zhejiang University, China.
Room G
Prospect and tendency of PM Motor
Mr. Shaolan Li, Zhejiang Zhongyuan Electric Co., Ltd., China.
Industrial Technical Sessions 4 (ITS4-3) Oct. 24, 2014 (Fri.), 15:00-15:30Chair:
Venue:
Prof. Wei Zhang, Zhejiang University, China.
Room G
Current Situation and Perspectives of Rare Earth and NdFeB
Magnets in the World
Mr. Pengpeng Yi, Ningbo SONGKE Magnetic Materials Co., Ltd.
.
ICEMS2014 Oral Presentation Schedule
Oct. 23, 2014 (Thu.)
Session LS1A
Time:
Chairs:
Venue:
14:00-15:30
PM Motor Drives 1
14:00-15:30, October 23, Thursday
Prof. Mi-Ching Tsai, National Cheng Kung University, Taiwan
Prof. Jiabing Hu, Huazhong University of Sciense & Technology, China
Room A
LS1A1
14:00-14:15
LS1A2
14:15-14:30
LS1A3
14:30-14:45
LS1A4
14:45-15:00
LS1A5
15:00-15:15
Torque Ripple Reduction in Permanent Magnet Synchronous
Machines with Concentrated Windings and Pre-Wound Coils
J. Richnow1, D. Gerling1, and P. Stenzel2
1
Universitaet der Bundeswehr Muenchen, Germany, 2AUDI AG,
Germany
Torque Ripple Reduction of Flux-Switching Machines with
Twisted-Rotor Structure
Dee Xie, Yu Wang, and Zhiquan Deng
Nanjing University of Aeronautics and Astronautics, China
Analysis of Cogging Torque in Surface-Mounted Permanent Magnet
Machines with Segmented Stators
Jian Yuan, Cen-Wei Shi, and Jian-Xin Shen
Zhejiang University, China
Influence of End-Effect on Torque-Speed Characteristics of Various
Switched Flux Permanent Magnet Machine Topologies
M.M.J. Al-Ani, and Z.Q. Zhu
University of Sheffield, UK
Analysis and Optimization on Characteristics of Brushless DC Motor
Based on Overlapping Commutation
Hongsheng Hou, and Weiguo Liu
Northwestern Polytechnical University, China
LS1A6
15:15-15:30
Sensorless DTC of a Self-Decelerating Permanent-Magnet Wheel
Motor at Full Speed Range
Li Zhang1, Ying Fan1, 2, Weixia Zhu1, and Lingling Gu1
1
Southeast University, China, 2Jiangsu Key Laboratory of Smart Grid
Technology and Equipment, China
Session LS1B
Induction Motor Drives 1
Time:
Chairs:
Venue:
14:00-15:30, October 23, Thursday
Prof. Kan Akatsu, Shibaura Institute of Technology, Japan
Dr. Baochao Wang, Harbin Institute of Technology, China
Room B
LS1B1
14:00-14:15
LS1B2
14:15-14:30
LS1B3
14:30-14:45
LS1B4
14:45-15:00
LS1B5
15:00-15:15
LS1B6
Induction Motor Parameter Identification Based on T-model
Equivalent Circuit
Ming Fan, Jianyun Chai, and Xudong Sun
Tsinghua University, China
Parameter Identification of Nine-Phase Induction Machines with
Concentrated Windings
Zicheng Liu1, Zedong Zheng1, Yongdong Li1, and Ling Peng2
1
Tsinghua University, China, 2China Ship Design Center, China
Identification of Self-Tuning Induction Motor Drive System Based on
Improved Least-Square Algorithm
Dinghui Mao, Jianqi Qiu, and Cenwei Shi
Zhejiang University, China
A Simplified Approach for Identification of Parasitic Capacitances in
Three-Phase Induction Motor Driven by PWM Inverter
Rudolf Ribeiro Riehl, José Alfredo Covolan Ulson, André Luiz
Andreoli, and Alceu Ferreira Alves
São Paulo State (Paulista) University, Brazil
Influence of Mechanical Parameters on Power Efficiency of Induction
Motors
Juan Li, and Jian-Xin Shen
Zhejiang University, China
Measured Loss Evaluation of Asymmetrical Parameter Type
Two-Phase Induction Motor Supplied with a Three-leg Voltage Source
Inverter
15:15-15:30
Prayad Kongsuk, Watcharin Promkhun, and Vijit Kinnares
King Mongkut’s Institute of Technology Ladkrabang, Thailand
Session LS1C
Traction Motors & Transportation 1
Time:
Chairs:
Venue:
14:00-15:30, October 23, Thursday
Prof. Shanming Wang, Tsinghua University, China
Prof. Dong Wang, National Key Laboratory for Vessel Integrated Power
System Technology, Naval Universtiy of Engineering, China
Room C
LS1C1
14:00-14:15
Integrated System for Electrical Generation and Boosting
Robert Keller1, Erkan Mese2, and Joel Maguire1
1
BorgWarner Inc., USA, 2Yildiz Technical University, Turkey
LS1C2
14:15-14:30
Design of Dual Rotor-Axial Gap PMVM for Hybrid Electric Vehicle
Yohei Kokubo, and Shoji Shimomura
Shibaura Institute of Technology, Japan
LS1C3
DC Micro-grid Based on DC Traction Power Supply System and
Electric Vehicle Batteries Charging & Discharging System
Ming Meng1, Mingwei Guo1, Yaning Yuan1, Li Jiang2, Jian Liu2,
Dalong Hu2, Haiyang Cong3, and Dan Hao4
1
North China Electric Power University, China, 2State Grid Liaoning
Electric Power Company Limited, China, 3State Grid Liaoning
Electric Power Supply CO., LTD., China, 4Liaoning Electric Power
Survey & Design Institute, China
14:30-14:45
LS1C4
14:45-15:00
LS1C5
15:00-15:15
LS1C6
Design of an Automotive 48 V Integrated Starter-Generator on the
Basis of an Induction Machine with Concentrated Windings
Adrian Patzak, and Dieter Gerling
University of Federal Defense Munich, Germany
Design and Operational Analyses of an Electromagnetic Hybrid Shock
Absorber System for Scooter Application
Cheng-Tsung Liu1, Chang-Chou Hwang2, and Wei-Ping Lin1
1
National Sun Yat-Sen University, Taiwan, 2Feng Chia University,
Taiwan
Investigation of a Five-Phase 30-Slot/32-Pole In-Wheel Outer-Rotor
Permanent-Magnet Synchronous Machine for Electric Vehicles
15:15-15:30
Yi Sui, Yong Liu, Pengfei Wang, Fan Wu, and Bin Yu
Harbin Institute of Technology, China
Session LS1D
Renewable Energy Systems 1
Time:
Chairs:
Venue:
14:00-15:30, October 23, Thursday
Prof. Shoudao Huang, Hunan University, China
Prof. Wei Hua, Southeast University, China
Room D
LS1D1
14:00-14:15
Stability of DC-Link Voltage Affected by Phase-Locked Loop for
DFIG-Based Wind Turbine Connected to a Weak AC System
Dong Wang1, Jiabing Hu1, Yunhui Huang1, Ningbo Wang2, and Qiang
Zhou2
1
Huazhong University of Science and Technology, China, 2Gansu
Electric Power Corporation, China
LS1D2
14:15-14:30
Control of Converter-Based Generators for a Single-Phase Microgrid
Sompob Polmai
King Mongkut’s Institute of Technology Ladkrabang, Thailand
LS1D3
Comparison of Interior and Surface Permanent Magnet Machines with
Fractional Slot Concentrated Windings for Direct-Drive Wind
Generators
Hong Chen, Ronghai Qu, Jian Li, and Bo Zhao
Huazhong University of Science and Technology, China
14:30-14:45
LS1D4
14:45-15:00
LS1D5
15:00-15:15
LS1D6
Synchronizing Stability of DFIG-based Wind Turbines Attached to
Weak AC Grid
Qi Hu1, Jiabing Hu1, Hao Yuan1, Haiyan Tang2, and Yan Li2
1
Huazhong University of Science and Technology, China, 2China
Electric Power Research Institute, China
Small Signal Modeling and Stability Analysis of a DFIG Based Wind
Power System under Unbalanced Grid Voltage Condition
Tao Wang, and Heng Nian
Zhejiang University, China
Stability Analysis of Grid-connected Converter Based on
Interconnected System Impedance Modeling under Unbalanced Grid
Conditions
15:15-15:30
Hongyu Yang, and Heng Nian
Zhejiang University, China
Session LS1E
Reluctances Machines 1
Time:
Chairs:
Venue:
14:00-15:30, October 23, Thursday
Prof. Qiongxuan Ge, Institute of Eletrical Engineering Chinese
Academy of Sciences, China
Dr. Kaiyuan Lu, Aalborg University, Denmark
Room E
LS1E1
14:00-14:15
LS1E2
14:15-14:30
LS1E3
14:30-14:45
LS1E4
14:45-15:00
LS1E5
15:00-15:15
LS1E6
15:15-15:30
Research on Optimization Regulation Method of Ampere Density and
Coil Space Factor for Switched Reluctance Machine
Peng Sun, Chi zhang, Jinhua Chen, and Fei Zhao
Chinese Academy of Sciences, China
Influence of Rotor Pole Arc on Generating and Motoring Performance
of Doubly Salient Electro-magnetic Machines
Yu Zhou, Zhuoran Zhang, Yin Wang, and Li Yu
Nanjing University of Aeronautics and Astronautics, China
Evaluation of Efficiency Optimized Variable Flux Reluctance Machine
for EVs/HEVs by Comparing with Interior PM Machine
X. Liu, Z. Q. Zhu, and D. Wu
University of Sheffield, UK
Design of Novel 12/14 Bearingless Permanent Biased Switched
Reluctance Motor
Bingkun Xue, Huijun Wang, and Junfang Bao
Beihang University, China
The Effect of Excitation Angles in Single-Pulse Controlled Switched
Reluctance Machines on Acoustics and Efficiency
A. Klein-Hessling, B. Burkhart, D. Scharfenstein, and R. W. De
Doncker
RWTH Aachen University, Germany
Suppressing Control of Rising Bus Voltage for Switched Reluctance
Motor in Braking Operation
Chun Gan1, Jianhua Wu1, Ning Wang2, Shiyou Yang1, and Yihua Hu3
1
Zhejiang University, China, 2 State Grid Zhejiang Electric Power
Company, China, 3University of Strathclyde, UK
Session LS1F
Time:
Chairs:
Venue:
Special Machines and Actuators 1
14:00-15:30, October 23, Thursday
Dr. Rajesh Deodhar, IMRA Europe S.A.S.,UK
Prof. Jian Li, Huazhong University of Sciense&Technology, China
Room F
LS1F1
14:00-14:15
Loss Investigation of Motor Integrated Permanent Magnet Gear
Tommy V. Frandsen, and P. O. Rasmussen
Aalborg University, Denmark
LS1F2
Cost reduction and performance improvement opportunities in
automotive accessory motors exploiting 3-D flux paths
Rajesh P. Deodhar1, Adam Pride1, and Jonathan J. Bremner2
1
IMRA Europe SAS UK Research Centre, UK, 2Elektromagnetix Ltd.,
UK
14:15-14:30
LS1F3
14:30-14:45
LS1F4
14:45-15:00
LS1F5
15:00-15:15
LS1F6
15:15-15:30
Design and Analysis of a Novel Hybrid Permanent Magnet Memory
Motor
Yubin Zhou, Wenbo Wang, and Yangsheng Chen
Zhejiang University, China
Study on Electrically Excitation System of a Novel Brushless
Synchronous Machine
Fengge Zhang, Yunwu Zhao, GuangLong Jia, and Ming Lin
Shenyang University of Technology, China
Design and Characteristic Study of Large Torque Micro-Nano
Platform Based on Piezoelectric Stack
Hong Jin, Long Jin, and Zhike Xu
Southeast University, China
DC Motor Control based on Artificial Neural Network and Adaptive
PI
S. Pengpraderm1, and S. Ruangsinchaiwanich2
1
Rajamangala University of Technology, Thailand, 2Naresuan
University, Thailand
Oct. 23, 2014 (Thu.)
Session LS2A
Time:
Chairs:
Venue:
16:00-17:30
PM Motor Drives 2
16:00-17:30, October 23, Thursday
Dr. François Baudar, Université catholique de Louvain (UCL), Belgium
Prof. Wei Hua, Southeast University, China
Room A
LS2A1
16:00-16:15
LS2A2
16:15-16:30
LS2A3
16:30-16:45
LS2A4
16:45-17:00
LS2A5
17:00-17:15
LS2A6
17:15-17:30
Parameter Estimation of PMSM for Aiding PI Regulator Design of
Field Oriented Control
Kan Liu, and Z.Q. Zhu
University of Sheffield, UK
A New Motor Speed Extraction Method Based on the Combination of
Smoothing and Polynomial Fitting Filter
Xi Xiao1, Youshuang Ding1, and Qiuying Yang2
1
Tsinghua University, China, 2Beijing Research Institute of
Automation for Machinery Industry, China
A Compensation Method for Sequential Current Sampling in
Multi-Phase AC Motor Control
Zhiqian Chen, and Qiao Zhang
IMRA Europe S.A.S., UK
An Improved Rotor Position Estimation in PMSM with
Low-Resolution Hall-Effect Sensors
Xinghao Zhang, and Wei Zhang
Zhejiang Universty, China
Influence of Back-EMF and Current Harmonics on Position
Estimation Accuracy of Permanent Magnet Synchronous Machine
Ali H. Almarhoon, and Z.Q. Zhu
University of Sheffield, UK
Self Identification and Compensation of Position Sensor Error in
Interior Permanent Magnet Synchronous Machine (IPMSM) Drives
Siwei Cheng, Dong Wang, and Junquan Chen
Naval University of Engineering, China
Session LS2B
Time:
Chairs:
Venue:
Induction Motor Drives 2
16:00-17:30, October 23, Thursday
Prof. Baodong Bai, Shenyang University of Technology, China
Prof. Yangsheng Chen, Zhejiang University, China
Room B
LS2B1
16:00-16:15
LS2B2
16:15-16:30
LS2B3
16:30-16:45
LS2B4
16:45-17:00
LS2B5
17:00-17:15
LS2B6
17:15-17:30
Nonlinear Adaptive Control of Induction Motor with Sliding Mode
Flux Observer
W. Zhang, J. Chen, Y. Ren, L. Li, W. Yao, and L. Jiang
University of Liverpool, UK
Simulation and Analysis of Novel Three-winding Series-connected
Single-phase Induction Motor under Fault Operation Process
Hui Zhong1, Xiuhe Wang1, Lin Zhao2, and Helin Wen3
1
Shandong University, China, 2Gannon University, The United State,
3
Nanyang Polytechnic, Singapore
Analysis of Electromagnetic Torque of a Fifteen-Phase Induction
Machine in Ten-Phase Operation Mode
Xiaoqin Zheng1, Dong Wang2, Junquan Chen2, Siwei Cheng2, and
Kun Wei2
1
Huazhong University of Science and Technology, China, 2Naval
University of Engineering, China
The Research of Vector Control System Harmonic Suppression
Technology Based on Variable Inductance Reactor
Jianghua Yu, Baodong Bai, Dezhi Chen, and Zhaofu Hu
Shenyang University of Technology, China
High Speed Solid Rotor Induction Machine: Analysis and
Performances
L. Papini1, C. Gerada1, D. Gerada2, and Abdeslam Mebarki2
1
University of Nottingham, UK, 2Cummins Generator Technologies,
UK
An Improved Two-Vectors-Based Model Predictive Torque Control
Without Weighting Factors for Induction Motor Drives
Yongchang Zhang, and Haitao Yang
North China University of Technology, China
Session LS2C
Time:
Chairs:
Venue:
Traction Motors & Transportation 2
16:00-17:30, October 23, Thursday
Prof. Xiuhe Wang, Shandong University, China
Prof. Cheng-Tsung Liu, National Sun Yat-Sen University, Taiwan
Room C
LS2C1
16:00-16:15
LS2C2
16:15-16:30
LS2C3
16:30-16:45
LS2C4
16:45-17:00
LS2C5
Design Aspects of a High Torque Density Machine for an Aerospace
Traction Application
M. Galea, S. Roggia, L. Papini, Z.Xu, C. Tighe, M. Hamiti, C. Gerada,
and S. Pickering
University of Nottingham, UK
Power Characteristics of Isolation Units in a Novel Power Electronic
Transformer (PET) for Locomotive Traction Applications
Chunyang Gu, Zedong Zheng, and Yongdong Li
Tsinghua University, China
Control of a Three-Sources-Power-Net for More Electric Aircraft
Application including a Fuel-Cell-APU
Edin Hasic, and Dieter Gerling
Universitaet der Bundeswehr Muenchen, Germany
Design and Analysis of a Novel Fault Tolerant Permanent Magnet
Synchronous Motor for Aircraft Application
Jinquan Xu1, Hong Guo1, Kaiping Yu2, and Xiaolin Kuang1
1
Beijing University of Aeronautics and Astronautics, China,
2
TRANS-ASIA Gas Pipeline Company Limited, China
17:00-17:15
Large Signal Stability Analysis for Constant Power Loads with RC
Parallel Damping Filters
Xinbo Liu1, Shuohan Ma2, Zhengxi Li1, and Naixin Wang1
1
North China University of Technology, China, 2China Longyuan
Power Group Corporation Limited, China
Session LS2D
Renewable Energy Systems 2
Time:
Chairs:
Venue:
16:00-17:30, October 23, Thursday
Prof. Markus Henke, TU Braunschweig, IMAB, Germany
Dr. Jianfei Pan, Shenzhen University, China
Room D
LS2D1
16:00-16:15
LS2D2
16:15-16:30
Experimental Study on the Effects of the Pulse Load Characteristics
on the Performance of the Slack Bus Generator
Mustafa Farhadi, and Osama Mohammed
Florida International University, USA
A Coordinated Control Strategy of DFIG-based WECS for High
Voltage Ride-through Enhancement
Yang Fang, Dan Sun, and Pinghua Xiong
Zhejiang University, China
LS2D3
16:30-16:45
Model Predictive Control of Smart Microgrids
Jiefeng Hu1, 2, Jianguo Zhu2, and Josep M. Guerrero3
1
Beihang University, China, 2University of Technology, Sydney,
Australia, 3Aalborg University, Denmark
LS2D4
16:45-17:00
Controller Design of Flywheel Energy Storage Systems in Microgrid
Ji Feng1, Wang Gongbao1, Fu Lijun1, Yang Yaqiao2, Wang Ruitian1,
and Xie Zhen1
1
Naval University of Engineeging, China, 2No. 92762 unit, China
LS2D5
Optimal Renewable Energy Farm and Energy Storage Sizing Method
for Future Hybrid Power System
Tan Ma, Christopher R. Lashway, Yuan Song, and Osama Mohammed
Florida International University, USA
17:00-17:15
LS2D6
17:15-17:30
Session LS2E
Time:
Chairs:
Venue:
LS2E1
Dynamic Compensating Strategy and En-stabilizing Compensator to
Enhance the Stability of Wind Farms Integrated into Weak Grid
Lei Shang1, Jiabing Hu1, Xiaoming Yuan1, Mingquan Zhao1, Gang
Liu2, and Lin Wang2
1
Huazhong University of Science and Technology, China, 2State Grid
Corporation of China, China
Reluctances Machines 2
16:00-17:30, October 23, Thursday
Prof. Deliang Liang, Xi’an Jiaotong University, China
Prof. Guangzhong Cao, Shenzhen University, China
Room E
A Novel Output Power Control for Variable-Speed Switched
Reluctance Generators Using Artificial Neural Network
16:00-16:15
P. Kerdtuad, and S. Kittiratsatcha
King Mongkut's Institute of Technology Ladkrabang, Thailand
LS2E2
The Coupling Characteristics Analysis of a Novel 12/14 Type
Bearingless Switched Reluctance Motor
Junfang Bao, Huijun wang, and Bingkun Xue
Beihang University, China
16:15-16:30
LS2E3
16:30-16:45
LS2E4
16:45-17:00
LS2E5
17:00-17:15
Is Acoustically Oriented Control Always Inefficient for an Automotive
Switched Reluctance Machine?
A. Hofmann, M. Schenk, C. P. Weiss, I. Ralev, A. Klein-Hessling, and
R. W. De Doncker
RWTH Aachen University, Germany
A Thrust Force Characteristics Measurement of the Planar Switched
Reluctance Motor Using Flux Linkage Characteristics
Hong-Xin Zheng1, Guang-Zhong Cao1, Su-Dan Huang1, 2, Ling-Long
Li1, and Ling-Ming Li1
1
Shenzhen University, China, 2Southwest Jiaotong University, China
A High Efficiency Direct Instantaneous Torque Control of SRM Using
Commutation Angles Control
Yulin Wang1, Huajiang Wu2, Wei Zhang1, and Yunlong Ma1
1
Zhejiang University, China, 2Ningbo Essence of CNC Technology
Co., LTD, China
LS2E6
17:15-17:30
DC Excited Flux-Switching Motor: Rotor Structural Optimization
S. D. Chishko, Y. Tang, J. J. H. Paulides, and E. A. Lomonova
Eindhoven Technical University, The Netherlands
Session LS2F
Special Machines and Actuators 2
Time:
Chairs:
Venue:
16:00-17:30, October 23, Thursday
Prof. Ahmed Masmoudi, University of Sfax, Tunisia
Prof. Jianzhong Zhang, Southeast University, China
Room F
LS2F1
16:00-16:15
3D Global Windings Hybrid Excitation Switching Flux machine
E. Hoang1, A. Dupas1, S. Hlioui2, M. Lecrivain2, and M. Gabsi1
1
SATIE, ENS Cachan, CNRS, France, 2SATIE, CNAM, CNRS, ENS
Cachan, France
LS2F2
16:15-16:30
LS2F3
16:30-16:45
LS2F4
16:45-17:00
LS2F5
17:00-17:15
LS2F6
17:15-17:30
A study of piezoelectric generator based on the flow around a blunt
body
Xiu Gao1, Zhike Xu1, Juping Gu2, Feifei Pan1, and Xiaoxiao Dong1
1
Southeast University, China, 2Nantong University, China
Comparison of Variable Flux Reluctance, Switched Flux and
Fractional Slot PM12-Stator Slots Machines having 10- and 14-Rotor
Poles
M. Zheng, X. Liu, and Z.Q. Zhu
University of Sheffield, UK
Analysis and Design of Separated Permanent Magnet Actuator for
225AF Molded Case Circuit Breaker
Hyeon-Jeong Park, So-Hyun Kim, Jong-Suk Ro, and Hyun-Kyo Jung
Seoul National University, Korea
AC Breakdown Voltage of Thermal Bubble Induced Two-Phase Flow
Condition of Inflammable Fluorocarbon by Self-Heating Electrode
Wenhao Niu1, 2, Guoqiang Zhang1, Haifeng Zhong1, 2, and Tao Lin1, 2
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
Research on Electromagnetic Performance of an Axial
Magnetic-Field-Modulated Brushless Double-Rotor Machine for
Hybrid Electric Vehicles
Chengde Tong, Zhiyi Song, Ping Zheng, Jingang Bai, and Quanbin
Zhao
Harbin Institute of Technology, China
Oct. 24, 2014 (Fri.)
Session LS3A
Time:
Chairs:
Venue:
LS3A1
8:30-10:00
PM Motor Drives 3
8:30-10:00, October 24, Friday
Prof. Xi Xiao, Tsinghua University, China
Prof. Chung-Yuen Won, Sungkyunkwan University, Korea
Room A
Novel Switched Flux Machine with Radial and Circumferential
Permanent Magnets
8:30-8:45
M.M.J. Al-Ani, and Z.Q. Zhu
University of Sheffield, UK
LS3A2
Control of a Hybrid Excitation Machine with Open-Winding Structure
for Hybrid Electric Vehicles
Yu Wang, and Zhiquan Deng
Nanjing University of Aeronautics and Astronautics, China
8:45-9:00
LS3A3
A Modified Flux Weakening Direct Torque Control for Open Winding
PMSM System Fed by Hybrid Inverter
Wenzhi Zhou, Dan Sun, and Bin Lin
Zhejiang University, China
9:00-9:15
LS3A4
Analysis on Constant Power Range Enhancement in Hybrid-Inverter
Open Winding PMSM Drive System
Bin Lin, and Dan Sun
Zhejiang University, China
9:15-9:30
LS3A5
The Use of Genetic Algorithms for Speed and Current Controller
Designs for IPMSM Drive
Pakorn Chottiyanont, Mongkol Konghirun, and Wanchak Lenwari
King Mongkut’s University of Technology Thonburi, Thailand
9:30-9:45
LS3A6
Chaos Control of the Permanent Magnet Synchronous Motor Using an
Improved Sliding Mode Controller
Ling-Long Li1, Su-Dan Huang1, 2, Yun Wang1, Guang-Zhong Cao1,
and Yan Liu3
1
Shenzhen University, China, 2Southwest Jiaotong University, China,
3
Tsinghua University, China
9:45-10:00
Session LS3B
Time:
Chairs:
Venue:
LS3B1
Induction Motor Drives 3
8:30-10:00, October 24, Friday
Prof. Liming Shi, Institute of Eletrical Engineering Chinese Academy of
Sciences, China
Dr. Jean-Claude Mipo, Valeo Powertrain Electric Systems, France
Room B
Analysis of Electromagnetic Stiffness in Submersible Motors With
Inclined Rotor Eccentricity
8:30-8:45
Fuying Li, Qiang Lv, Yong Fang, Na Liang, and Xiaohua Bao
Hefei University of Technology, China
LS3B2
Research on Discharging Bearing Currents of PWM Inverter-Fed
Variable Frequency Induction Motor
Yu Wang, Baodong Bai, and W.F. Liu
Shenyang University of Technology, China
8:45-9:00
LS3B3
High Frequency Modeling and Analysis of Voltage Reflection in the
Three-Level PWM Inverter-fed High Power Induction Motor Drive
System
Gao-fei Xue, Qi-jun Pan, Qing-yun Meng, Cheng-lin Yi, and Ying
Zhong
Naval University of Engineering, China
9:00-9:15
LS3B4
Power Supply for Testing of Induction Motors and Generators
Complied With IEEE std. 112-2004 for an Energy Conversion
Laboratory
B. Sawetsakulanond1 and V. Kinnares2
1
Mahanakorn University of Technology Nongjok, Thailand,
2
King Mongkut's Institute of Technology, Thailand
9:15-9:30
LS3B5
A Model Predictive Control Strategy for Dual Induction Motor Drive
System Fed by Five-leg Inverter
Yang Mei, Zichen Yi, and Zhengxi Li
North China University of Technology, China
9:30-9:45
LS3B6
High Performance Field-Weakening Control Algorithm of Sensorless
Induction Motor Using Speed Adaptive Full-Order Observer
Bo Wang, Yong Yu,Wei Sun, and Dianguo Xu
Harbin Institute of Technology, China
9:45-10:00
Session LS3C
Time:
Chairs:
Venue:
LS3C1
Power Converters 1
8:30-10:00, October 24, Friday
Prof. Zhengming Zhao, Tsinghua University, China
Dr. K.H.Loo, The Hong Kong Polytechnic University, Hongkong
Room C
A New Five-level Converter for Low-Voltage Motor Drive
Applications
8:30-8:45
Xibo Yuan
The University of Bristol, UK
LS3C2
A New Method to Reduce Both Conduction and Commutation Torque
Ripple for BLDC Machines
Tiantian Sheng, Xiaolin Wang, and Tao Shan
Nanjing University of Aeronautics and Astronautics, China
8:45-9:00
LS3C3
Performance Evaluation of Single-Phase PWM AC Chopper fed
Three-Phase Induction Motor
Benyathip Phiphitsunthon, Chavaporn Bumroongphuck, Watcharin
Promkhun, and Vijit Kinnares
King Mongkut’s Institute of Technology Ladkrabang, Thailand
9:00-9:15
LS3C4
Wide Speed Range Six-Step Mode Operation of IPMSM Drives with
Adjustable DC-Link Voltage
Iliya Ralev, Tobias Lange, and Rik W. De Doncker
RWTH Aachen University, Germany
9:15-9:30
LS3C5
9:30-9:45
Induced State Space Average Model of Isolated Power System
Gang Wang1, Feng Ji1, Lijun Fu1, Qiaoming Shi2, and Wentao Jiang1
1
National Key Laboratory for Vessel Integrated Power System
Technology, China, 2Xi'an Jiaotong University, China
LS3C6
9:45-10:00
Periodic orbit model of 6-pulse diode rectifiers
Gang Wang1, Fan Ma1, Lijun Fu1, Qiaoming Shi2, and Yuhang Chen1
1
National Key Laboratory for Vessel Integrated Power System
Technology, China, 2Xi'an Jiaotong University, China
Session LS3D
Renewable Energy Systems 3
Time:
Chairs:
Venue:
LS3D1
8:30-8:45
LS3D2
8:30-10:00, October 24, Friday
Prof. Jianguo Zhu, University of Technology, Sydney, Australia
Prof. Mingyao Lin, Southeast University, China
Room D
A New-type Predictive Direct Power Control Solution for Three-phase
Grid-connected Inverters
Weizhong Ding, and Zaiping Pan
Zhejiang University, China
A Study on a Wind Turbine Simulator with a DC Motor Considering
Various Moments of Inertia
Baozhong Liu, Fujio Tatsuta, Shoji Nishikata, and Katsumi Suzuki
Tokyo Denki University, Japan
8:45-9:00
LS3D3
Improved Voltage Vector Control for a Stand-alone DFIG System
Based on Predictive Current Regulation Algorithm
Chong Zhu, Zhiyong Zeng, Qingwei Yuan, Huan Yang, and
Rongxiang Zhao
ZhejiangUniversity, China
9:00-9:15
LS3D4
A Novel Inertial Control Strategy for Full-Capacity Wind Turbine with
PLL by Optimizing Internal Potential Response
Shuai Li1, Jiabing Hu1, Shuo Wang1, Hongjie He2, Lin Wang3, and
Gang Liu3
1
Huazhong University of Science and Technology, China, 2Jiangsu
Electric Power Company, China, 3State Grid Corporation of China,
China
9:15-9:30
LS3D5
Modeling and Control of a Novel Dual-Stator Brushless Doubly-Fed
Wind Power Generation System
Ming Cheng1, Xinchi Wei1, Peng Han1, Ying Zhu2, and Zhe Chen3
1
Southeast University, China, 2Hohai University, China, 3Aalborg
University, Denmark
9:30-9:45
LS3D6
Concerns to the Emerging Grid Codes forWind Turbines’ LVRT in
Weak AC Grid
Yabing Yan1, Jiabing Hu1, Qi Hu1, Mingquan Zhao1, Yan Li2, and
Haiyan Tang2
1
Huazhong University of Science and Technology, China, 2China
Electric Power Research Institute, China
9:45-10:00
Session LS3E
Time:
Chairs:
Venue:
LS3E1
Noise & Vibration, Manufacturing
8:30-10:00, October 24, Friday
Prof. Ping Zheng, Harbin Institute of Technology, China
Prof. Ruiwu Cao, Nanjing University of Aeronautics and Astronautics,
China
Room E
The Influence of Cutting Edge Deformations on Magnetic
Performance Degradation of Electrical Steel
8:30-8:45
Shih-Kang Kuo, Wen-Chieh Lee, Sheng-Yang Lin, and Chen-Yuan Lu
China Steel Corporation, Taiwan
LS3E2
Innovative Needle Winding Method Using Curved Wire Guide in
order to Significantly Increase the Copper Fill Factor
P. Stenzel1, P. Dollinger1, J. Richnow1, 2, and J. Franke3
1
AUDI AG, Germany, 2Universitaet der Bundeswehr Muenchen,
Germany, 3Friedrich-Alexander-Universitaet Erlangen-Nuernberg,
Germany
8:45-9:00
LS3E3
Influence of Manufacture Process on Magnetic Property of FeCoV
Alloy
Junquan Chen1, Dong Wang1, Siwei Cheng1, and Jing Wang2
1
Naval University of Engineering, China, 2Shanghai Kangsheng Super
Alloy Co., Ltd, China
9:00-9:15
LS3E4
Analytical Approach for Magnetic and Acoustic Modeling of
Flux-Switching Permanent-Magnet Motors: Application to
Geometrical Optimization
Julien Boisson1, Francois Louf2, Javier Ojeda1, Xavier Mininger3, and
Mohamed Gabsi1
1
1SATIE, ENS Cachan, CNRS, France, 2LMT, ENS Cachan, CNRS,
France, 3LGEP, CNRS UMR8507, France
9:15-9:30
LS3E5
The Breathing Mode-Shape 0: Is It the Main Acoustic Issue in the
PMSMs of Today’s Electric Vehicles?
A. Hofmann, F. Qi, T. Lange, and R. W. De Doncker
RWTH Aachen University, Germany
9:30-9:45
LS3E6
Control of three phases – single phase matrix converter for transient
electromagnetic sounding
Gang Li, Shengbao Yu, Shaohua Jia, and Qingji Wang
Jilin University, China
9:45-10:00
Session LS3F
Time:
Chairs:
Venue:
LS3F1
Special Machines and Actuators 3
8:30-10:00, October 24, Friday
Prof. Liyi Li, Harbin Institute of Technology, China
Prof. Fengge Zhang, Shenyang University of Technology, China
Room F
Iron Loss Investigation of Miniaturized Magnetic Gears having Solid
Cores
R. Zanis, A. Borisavljevic, J. W. Jansen, and E. A. Lomonova
Eindhoven University of Technology, Netherlands
8:30-8:45
LS3F2
A ring-type traveling wave ultrasonic motor using optimized design of
piezoelectric ceramics
Xiaoxiao Dong, Minqiang Hu, Long Jin, and Peng Pan
Southeast University, China
8:45-9:00
LS3F3
Study on Unit Combination Type Direct-Driven Submersible
Permanent Magnet Motor
Bingyi Zhang, Zhongqi Liu, Honglong Ding, Kai Liu, and Guihong
Feng
Shenyang University of Technology, China
9:00-9:15
LS3F4
Design and First Experimentation of an Electromagnetically Actuated
Ferrofluidic Micropump
Bruno Dehez, Jèrôme Bollen, Emmanuel Debelder, and Olivier Smal
Université catholique de Louvain, Belgium
9:15-9:30
LS3F5
Design of a Novel Electromagnetic Planetary Gear Used for Hybrid
Electric Vehicles
Jingang Bai, Yong Liu, Chengde Tong, Luming Cheng, and Zhanxi
Lin
Harbin Institute of Technology, China
9:30-9:45
LS3F6
Design and Analysis Method for a DC Magnetic Contactor with a
Permanent Magnet
So-Hyun Kim, Hyeon-Jeong Park, Jong-Suk Ro, and Hyun-Kyo Jung
Seoul National University, Korea
9:45-10:00
Oct. 24, 2014 (Fri.)
Session LS4A
Time:
Chairs:
Venue:
PM Motor Drives 4
10:30-12:00, October 24, Friday
Prof. Masayuki Morimoto, Tokai University, Japan
Prof. Ping Zheng, Harbin Institute of Technology, China
Room A
10:30-12:00
LS4A1
10:30-10:45
LS4A2
10:45-11:00
LS4A3
11:00-11:15
LS4A4
11:15-11:30
LS4A5
11:30-11:45
LS4A6
11:45-12:00
Session LS4B
Time:
Chairs:
Venue:
LS4B1
Performance Analysis of a Switched-Flux Permanent Magnet Machine
with Hybrid NdFeB and Ferrite Magnets
I.A.A. Afinowi1, Z. Q. Zhu1, Y. Guan1, J. C. Mipo2, and P. Farah2
1
University of Sheffield, UK, 2Valeo, France
Fault Tolerant Control of Harmonic Injected Nine-Phase Flux
Switching Permanent Magnet Motor Drive System
Feng Yu1, Ming Cheng1, Feng Li1, K. T. Chau2, Jin Huang3, and Wei
Hua1
1
Southeast University, China, 2The University of Hong Kong, Hong
Kong, 3Zhejiang University, China
Hybrid Motor Control Application with Moving Average Based
Low-Pass Filter and High-Pass Filter
Wei Sun, Jian-Xin Shen, Kang Wang, and Meng-Jia Jin
Zhejiang University, China
Stator Iron loss Measurement Method in Permanent Magnet
Synchronous Motor to Remove the Mechanical Loss Effect.
Takahiro Sakaue, and Kan Akatsu
Shibaura Institute of Technology, Japan
A General and Intuitive Approach to Understand and Compare the
Torque Production Capability of AC Machines
Dong Wang, Kaiyuan Lu, and Peter Omand Rasmussen
Aalborg University, Denmark
A Comparative Study of Model Predictive Current Control and FOC
for PMSM
Li Niu, Ming Yang, Xianguo Gui, and Dianguo Xu
Harbin Institute of Technology, China
Induction Motor Drives 4
10:30-12:00, October 24, Friday
Prof. Yongxiang Xu, Harbin Institute of Technology, China
Prof. Zhuoran Zhang, Nanjing University of Aeronautics and
Astronautics, China
Room B
Performance Evaluation of a Single-Phase Grid Connected Induction
Generator
10:30-10:45
S.Yukhalang1, B. Sawetsakulanond1, and V.Kinnares2
1
Mahanakorn University of Technology, Thailand, 2King Mongkut's
Institute Technology, Thailand
LS4B2
Dynamic Loss Minimizing Control of DB-DTFC IM Drives Using a
Flux Command Look Ahead Filter
Patrick E.Ozimek1, Jonathan D. Hoffman1, Yuying Shi2, and Robert D.
Lorenz2
1
Rockwell Automation, USA, 2University of Wisconsin-Madison, USA
10:45-11:00
LS4B3
11:00-11:15
LS4B4
11:15-11:30
LS4B5
11:30-11:45
LS4B6
11:45-12:00
Session LS4C
Time:
Chairs:
Venue:
Remanufacturing of Low-Efficiency Induction Machines with Interior
Permanent-Magnet Rotors for Energy Efficiency Improvement
Ronggang Ni, Li Ding, Xianguo Gui, Gaolin Wang, Guoqiang Zhang,
and Dianguo Xu
Harbin Institute of Technology, China
Estimation of Saturation Characteristic of Induction Motors by
Injecting Sinusoidal Currents with Customized Low Frequency
Jiayang Ruan, and Shanming Wang
Tsinghua University, China
Comparative Study on Structure of Laminated-Rotor High-Speed
Induction Machine
Fengge Zhang, Yuchao Li, and Guanghui Du
Shenyang University of Technology, China
Transient Behavior of Doubly Fed Induction Generator during Voltage
Recovery
Sheng Hu, Xudong Zou, and Yong Kang
Huazhong University of Science and Technology, China
Power Converters 2
10:30-12:00, October 24, Friday
Dr. Rajesh Deodhar, IMRA Europe S.A.S.,UK
Prof. Yongdong Li, Tsinghua University, China
Room C
LS4C1
10:30-10:45
Voltage Balance Control of Vienna-Type Rectifier Using SVPWM
Based On 600 Coordinate System
Hui Ma, Yunxiang Xie, Yubo Yang, and Zeyu Shi
South China University of Technology, China
LS4C2
10:45-11:00
LS4C3
11:00-11:15
Boundary and Optimum of Constant-Voltage Load Three-Phase
Bridge Rectifier
Zhihua Zhao1, Qiang Gao2, Kaiwen He3, and Jian Tang1
1
Naval University of Engineering, China, 2NAD, China, 3HUST, China
Direct Power Control of PWM Rectifier Under Unbalanced Grid
Voltage
Yongchang Zhang1, Changqi Qu1, Zhengxi Li1, and Yingchao Zhang2
1
North China University of Technology, China, 2Chongqing
Communication Institute, China
LS4C4
11:15-11:30
A Novel Switched-Capacitor AC-AC Converter With A Ratio Of 1/4
Jiachuan You, and Cai Hui
China Jiliang University, China
LS4C5
PWM Strategy of a Novel Cascaded Multi-level Converter for Battery
Management
Fengqi Chang, Zedong Zheng, and Yongdong Li
Tsinghua University, China
11:30-11:45
Session LS4D
Renewable Energy Systems 4
Time:
Chairs:
10:30-12:00, October 24, Friday
Prof. Jianguo Zhu, University of Technology, Sydney, Australia
Prof. Wei Xu, Huazhong University of Science and Technology, China
Venue:
Room D
LS4D1
10:30-10:45
LS4D2
10:45-11:00
LS4D3
Analysis of the Jensen’s Model, the Frandsen’s Model and Their
Gaussian Variations
Sizhuang Liang, and Youtong Fang
Zhejiang University, China
PV Powered Three-Leg VSI Fed Asymmetrical Parameter Type
Two-Phase Induction Motor
Ekkawid Hayakwong, and Vijit Kinnares
King Mongkut’s Institute of Technology Ladkrabang, Thailand
Modeling and operation characteristics of large-scale photovoltaic
11:00-11:15
LS4D4
11:15-11:30
LS4D5
11:30-11:45
LS4D6
11:45-12:00
Session LS4E
Time:
Chairs:
Venue:
power plants based on PSASP
Yifei Xu1, Meng Qin2, Jiao He1, and Dehua Zhang1
1
Zhejiang University, China, 2Jiangsu Xingli Engineering
Construction Supervision & Consultation Co., Ltd, China
A Two-dimensional Direct-drive Generator for Wave Energy
Conversion
J. F. Pan, Bo Zhang, and Guangzhong Cao
Shenzhen University, China
Control of a Multifunctional 3-Phase 4-Wire Grid Connected
Converter using Adaptive Hysteresis Current Controller
Sakda Prommeuan1, Vijit Kinnares1, and Chakrapong Charumit2
1
King Mongkut's Institute of Technology, Thailand, 2Pathumwam
Institute of Technology, Thailand
Study of Direct-Drive Permanent Magnet Synchronous Generators
with Solid Rotor Back-Iron and Different Windings
Shaofeng Jia, Ronghai Qu, Jian Li, Xinggang Fan, and Meng Zhang
Huazhong University of Science and Technology, China
Field Computation & Analysis 1
10:30-12:00, October 24, Friday
Prof. Jianyun Chai, Tsinghua University, China
Prof. Shiyou Yang, Zhejiang University, China
Room E
LS4E1
10:30-10:45
LS4E2
10:45-11:00
LS4E3
11:00-11:15
Investigation of Lumped-Parameter Thermal Model and Thermal
Parameters Test for IPMSM
Wenbo Wang, Yubin Zhou, and Yangsheng Chen
Zhejiang University, China
Computation of Radiated Electric Fields from Cables Using the 1D
Time-Domain and Frequency-Domain TLM Methods
Jin Meng, Lei Zhang, Jian Tang, Yi Li, Fangmin He, and Huan Xiao
Naval University of Engineering, China
Coupling Calculation of Temperature Field for Dry-Type Smoothing
Reactor
Jifeng Cao1, Tuteng Chen1, Zhipeng Jiang2, Xishan Wen2, and Meng
Zhang3
1
CSG EHV Transmission Company, China, 2Wuhan University, China,
Beijing Power Equipment Group, China
3
LS4E4
11:15-11:30
LS4E5
11:30-11:45
Session LS4F
Time:
Chairs:
Venue:
Mechanical and thermal management design of a motor for an aircraft
wheel actuator
Z. Xu, M. Galea, C. Tighe, T. Hamiti, C. Gerada, and S.J. Pickering
University of Nottingham, UK
Machine Modeling and Design 1
10:30-12:00, October 24, Friday
Prof. Ming Cheng, Southeast University, China
Prof. Jin-Woo Ahn, Kyungsung University, Korea
Room F
LS4F1
10:30-10:45
LS4F2
10:45-11:00
LS4F3
11:00-11:15
LS4F4
11:15-11:30
LS4F5
Investigation of the Heat Transfer Coefficient on the Fins for Total
Enclosed Fan Cooled Permanent-magnet Motor
Baocheng Guo
Southeast University, China
Influence of Stator End-Winding Structure on the End-Winding
Leakage Inductance with Method of Vector-Potential
Weiling Zhang1, Xinzhen Wu1, and Dong Wang2
1
Qingdao University, China, 2Naval Engineering University, China
Simulation Analysis of Load Characteristics of Roller Washers under
BLDCM Direct Driving
Yong Li, Congyi Zhang, Liang Wang, Yucong Wei, Bo Zhao, Qian
Wang, and Jibin Zou
Harbin Institute of Technology, China
Unified Spiral Vector Model of the Dual-Stator Brushless Doubly-Fed
Induction Machine
Peng Han, Ming Cheng, Xinchi Wei, and Ning Li
Southeast University, China
Measurement-Parameterized Synchronous Machine Model with
Spatial-Harmonics
Tobias Lange1, Matthias Boesing2, and Rik W. De Doncker1
1
RWTH Aachen University, Germany, 2Robert Bosch GmbH, Germany
Design and Analysis on Switched Reluctance Motor System Using
11:30-11:45
LS4F6
11:45-12:00
Field-Circuit Coupled Method
Chun Gan, Jianhua Wu, Lifeng Zhang, Shiyou Yang, and Hairong
Wang
Zhejiang University, China
A Novel Modelica Based Design Platform for Switched Reluctance
Drive Systems
Yang Ji
German Aerospace Center, Germany
Oct. 24, 2014 (Fri.)
Session LS5A
Time:
Chairs:
Venue:
14:00-15:30
PM Motor Drives 5
14:00-15:30, October 24, Friday
Prof. Robert D. Lorenz, Univ. of Wisconsin-Madison, WEMPEC,USA
Prof. Xiaoyong Zhu, Jiangsu University, China
Room A
LS5A1
14:00-14:15
Influence of Machine Structure on High Speed PM BLDC Motor
He Hao1, Jian-Xin Shen1, Cheng Yuan2, and Qiang Qu3
1
Zhejiang University, China, 2Wujiang Nanyuan Electric Apparatus
Co., Ltd., China, 3Hangzhou Wahaha Group Co., Ltd., China
LS5A2
Stability Analysis for Matrix Converter Fed Permanent Magnet
Synchronous Motor System Based on PDF Control
Huayu Li, Ziling Nie, and Fengge Hu
Naval University of Engineering, China
14:15-14:30
LS5A3
14:30-14:45
LS5A4
14:45-15:00
Comparison of Parallel BLDC FSPM Machines with Strong
Flux-Weakening Capability
Pengfei Zhou1, Yu Wang1, Zhiquan Deng1, and Shaobang Xing1, 2
1
Nanjing University of Aeronautics and Astronautics, China, 2Jiangsu
University of Technology, China
Novel External Rotor Switched Flux Memory Motor with Hybrid
Magnets
D. Wu, Z. Q. Zhu, and X. Liu
University of Sheffield, UK
LS5A5
15:00-15:15
LS5A6
15:15-15:30
Session LS5B
Time:
Chairs:
Venue:
Comparison of FPCB windings of BLDC machines with paralelly and
radially magnetized rotor poles
Bruno Dehez, Francois Baudart, and Yves Perriard
1
Université catholique de Louvain, Belgium, 2Ecole Polytechnique
Fédérale de Lausanne, Switzerland
Simultaneous Optimization of Voltage Vector and Duty Cycle in
Model Predictive Torque Control of PMSM Drives
Yongchang Zhang, and Suyu Gao
North China University of Technology, China
Synchronous Machines
14:00-15:30, October 24, Friday
Prof. Takashi Abe, Nagasaki University, Japan
Prof. Kai Yang, Huazhong University of Sciense & Technology, China
Room B
LS5B1
14:00-14:15
Research on an Axial-Axial Flux Compound-Structure PMSM with
Varying Air Gap to Fulfill Field-Weakening Control
Jing Zhao1, Yashuang Yan1, Zhongxin Gu1, Zhen Chen1, and Ping
Zheng2
1
Beijing Institute Technology, China, 2Harbin Institute of Technology,
China
LS5B2
14:15-14:30
Optimal Design of an Axial Flux Permanent Magnet Motor
Hua-Yang Li, and Jian-Xin Shen
Zhejiang University, China
LS5B3
14:30-14:45
Effect of Saturation on Iron Loss in PMSM
Xiaofeng Ding1, Hong Guo1, Min Du1, Binbin Li2, Guanliang Liu1,
and Linlin Zhao1
1
BeiHang University, China, 2Hangzhou Wahaha Group Co., China
LS5B4
Monitoring of Shaft Voltages and Grounding Currents in Rotating
Machines
Greg Stone, Blake Lloyd, and Mladen Sasic
Iris Power, Canada
14:45-15:00
LS5B5
Design and Loss Analysis of a New Self-decelerating PM In-wheel
Motor
15:00-15:15
Lingling Gu1, Ying Fan1, 2, Li Zhang1, Ming Cheng1, 2, and K.T.Chau3
1
Southeast University, China, 2Jiangsu Key Laboratory of Smart Grid
Technology and Equipment, China, 3The University of Hong Kong,
Hong Kong
LS5B6
15:15-15:30
A Novel Inertia Identification Algorithm for PMSM
Li Niu, Ming Yang, Xianguo Gui, and Dianguo Xu
Harbin Institute of Technology, China
Session LS5C
Power Converters 3
Time:
Chairs:
Venue:
14:00-15:30, October 24, Friday
Prof. Vijit Kinnares, King Mongkut's Institute of Technology
Ladkrabang, Thailand
Prof. Kai Sun, Tsinghua University, China
Room C
LS5C1
14:00-14:15
LS5C2
14:15-14:30
LS5C3
14:30-14:45
LS5C4
14:45-15:00
Low THD Modulation strategy for Matrix & Multi-level matrix
converter based on modified DVM
Lin Qiu1, Lie Xu1, and Yongdong Li1, 2
1
Tsinghua University, China, 2Xinjiang University, China
Phase-shift Space Vector Pulse Width Modulation for Nine-switch
Inverter
N. Jarutus, and Y. Kumsuwan
Chiang Mai University, Thailand
Design of a Self-Oscillating Class D Power Amplifier for Piezoelectric
Actuators
Xinchang Liu, Paolo Germano, Yoan Civet, and Yves Perriard
École Polytechnique Fédérale de Lausanne, Switzerland
Study on High Frequency Inverter With 100kHz Current Feedback
Control by Using FPGA
Shunsuke Amano, and Kan Akatsu
Shibaura Institute of Technology, Japan
LS5C5
15:00-15:15
High Power Induction Heating
Chainiyom Phondon, and Pattana Intani
Pathumwan Institute of Technology, Thailand
LS5C6
Optimal Control for Shunt Active Power Filter Based on
15:15-15:30
Adaptive-Hysteresis Controller and Droop Controller
Shuai Xu, Jianzhong Zhang, and Xing Hu
Southeast University, China
Session LS5D
Reliability & Diagnostics
Time:
Chairs:
Venue:
14:00-15:30, October 24, Friday
Prof. Changsheng Zhu, Zhejiang University, China
Prof. S. Ruangsinchaiwanich, Naresuan University, Thailand
Room D
LS5D1
14:00-14:15
LS5D2
14:15-14:30
LS5D3
14:30-14:45
LS5D4
14:45-15:00
LS5D5
15:00-15:15
System for the insulation fault detection of AC electric machines
cores, based on magnetic field scanning
Witold Rams1, Michał Rad1, and Wojciech Kandora2
1
AGH University of Science and Technology, Poland, 2TurboCare
Lubliniec, Poland
Fault-tolerant Performances of Switched Reluctance Machine and
Doubly Salient Permanent Magnet Machine in Starter/Generator
System
Qiji Ze, Peng Kou, Deliang Liang, and Zhe Liang
Xi’an Jiaotong University, China
Integrated Fault Diagnosis and Fault-Tolerant Control of IPMSM
System
Hongyang Yao1, Hongmei Li1, and Giorgio Rizzoni2
1
Hefei University of Technology, China, 2The Ohio State University
Columbus, The United State
Fault Detection Technique for Identifying Broken Rotor Bars by
Artificial Neural Network Method
B. Wangngon1, N. Sittisrijan1, and S. Ruangsinchaiwanich2
1
Rajamangala University of Technology, Thailand, 2Naresuan
University, Thailand
Synthesis of Stator Current Waveform of Inverter-Fed Induction
Motor with Broken Bar Conditions
N. Sittisrijan1, B. Wangngon1, and S. Ruangsinchaiwanich2
1
Rajamangala University of Technology, Thailand, 2Naresuan
University, Thailand
Session LS5E
Time:
Chairs:
Venue:
14:00-15:30, October 24, Friday
Prof. Osama Mohammed, Florida International University, USA
Prof. Shiyou Yang, Zhejiang University, China
Room E
LS5E1
14:00-14:15
LS5E2
14:15-14:30
LS5E3
14:30-14:45
LS5E4
14:45-15:00
LS5E5
15:00-15:15
Session LS5F
Time:
Chairs:
Venue:
LS5F1
Field Computation & Analysis 2
Design and Research of a Novel Controllable Reactor Based on
Two-Phase Magnetic Materials
Zhiwei Chen, Baodong Bai, Dezhi Chen, and Jianghua Yu
Shenyang University of Technology, China
Extended Model of Flux Displacement in Rectangular Iron Sheets and
Geometry-Dependent Hysteresis Loss considering Saturation
Florian Bachheibl, and Dieter Gerling
University of Federal Defense Munich, Germany
Equivalent Stator Slot Model of temperature field for high
torque-density permanent magnet synchronous in-wheel motor
Peixin Liang, Yulong Pei, Feng Chai, and Shukang Cheng
Harbin Institute of Technology, China
3D Electromagnetic and Thermal Field Analysis of Edge Induction
Heater
Yilun Li1, Zeji Wang2, and Shiyou Yang1
1
Zhejiang University, China, 2Baosteel, China
An Improved Method for Design of Symmetrical Multiphase Winding
with Optimal Space Harmonics Spectrum
M. Cai, M. Henke, and W. -R. Canders
Technische Universität Braunschweig, Germany
Machine Modeling and Design 2
14:00-15:30, October 24, Friday
Prof. Isao Hirotsuka, Chubu University, Japan
Prof. Ronghai Qu, Huazhong University of Sciense&Technology, China
Room F
Electrical machine optimization using a kriging predictor
14:00-14:15
J.-L. Duchaud1, S. Hlioui1, 2, F. Louf3, and M. Gabsi1
1
SATIE, CNRS, France, 2CNAM, France, 3LMT-Cachan, UMR 8535,
ENS Cachan, France
LS5F2
Per-Unit HIL Real-Time Simulation Modeling & Test of Permanent
Magnet Synchronous Motor Based on FPGA
Jin Gao, Shiyang Song, and Surong Huang
Shanghai University, China
14:15-14:30
LS5F3
14:30-14:45
Design Optimization of Electrical Transformer Using Genetic
Algorithm
D.Phaengkieo, and S. Ruangsinchaiwanich
Naresuan University, Thailand
LS5F4
14:45-15:00
Modeling and characterization of a MEMS synchronous generator
Jasha Poliakine, Yoan Civet, and Yves Perriard
École Polytechnique Fédérale de Lausanne, Switzerland
LS5F5
Electrokinetic Modeling of Ion and Fluidic Transport Property in
Nanopore Systems
Honghua Xu1, Chun Fan2, and Kai Li1
1
Jiangsu Electric Power Company, China, 2Computer center of Peking
University, China
15:00-15:15
LS5F6
15:15-15:30
Mathematical analysis for predicting an unbalanced force in a simple
asymmetric circuit using Maxwellian electrodynamics
Arindam Banerjee, and Dr. P J Radcliffe
Royal Melbourne Institute of Technology, Australia
Oct. 24, 2014 (Fri.)
Session LS6A
Time:
Chairs:
Venue:
LS6A1
16:00-17:30
PM Generator Systems
16:00-17:30, October 24, Friday
Prof. Xiuhe Wang, Shandong University, China
Prof. Chang-Eob Kim, Hoseo University, Korea
Room A
Hybrid Excited Claw Pole Alternators: Attempt to Satisfy the
Increasing Power Need on Board
16:00-16:15
Rabeb Rebhi, Amina Ibala, and Ahmed Masmoudi
University of Sfax, Tunisia
LS6A2
Construction of a 3kW 250kRPM Permanent Magnet Synchronous
Machine for a Combined Heat and Power Unit
Martin Novak, and Zdenek Novak
Czech Technical University in Prague, Czech Republic
16:15-16:30
LS6A3
16:30-16:45
LS6A4
16:45-17:00
LS6A5
17:00-17:15
LS6A6
17:15-17:30
Session LS6B
Time:
Chairs:
Venue:
LS6B1
Direct Torque Control of a Permanent Magnet Synchronous
Generator Based on Space Vector Modulation
Xinyi Hua, Jianfei Yang, Huaren Wu, and Jian Liu
Nanjing Normal University, China
Study on the Optimization of Battery Voltage in Open-Winding
Generation Power System
Hui Liu, Yu Wang, Zhiquan Deng, and Lucheng Song
Nanjing University of Aeronautics and Astronautics, China
Comparative Study on Two Field Orientation Control Methods for
the Excitation Field in the Hybrid Excitation Synchronous Generator
Mingji Liu, Xiaoyan Zhang, and Jianxin Hu
North China Electric Power University, China
Development of an Air-cooled 150 kW High Speed Permanent Magnet
Motor with Gramme Ring Windings for Turbo Blowers
Jianning Dong1, Yunkai Huang1, Long Jin1, Baocheng Guo1, Tao
Zhou1, Heyun Lin1, and Jiyong Dong2
1
Southeast University, China, 2Nanjing CIGU Limited Cooperation,
China
Sensorless Control Technique
16:00-17:30, October 24, Friday
Prof. Faa-Jeng Lin, National Central University,Taiwan
Prof. Zhuoran Zhang, Nanjing University of Aeronautics and
Astronautics, China
Room B
Sensorless IPMSM Drive System Using Saliency Back-EMF Based
Torque Observer with MTPA Control
16:00-16:15
Faa-Jeng Lin1, Ying-Chih Hung2, and Jin-Kuan Chang1
1
National Central University, Taiwan, 2Tungyuan Electric &
Machinery Co., Ltd., Taiwan
LS6B2
High Bandwidth Zero Voltage Injection Method for Sensorless
Control of PMSM
Ge Xie1, Kaiyuan Lu1, Dwivedi Sanjeet Kumar2, and Rosholm Jesper
Riber2
1
Aalborg University, Denmark, 2Danfoss Power Electronics A/S,
Denmark
16:15-16:30
LS6B3
16:30-16:45
LS6B4
16:45-17:00
LS6B5
17:00-17:15
LS6B6
17:15-17:30
Session LS6C
Time:
Chairs:
Indirect Position Estimation Method for Switched Reluctance Motor
Using Searching Windings
Cheng Wang1, Zhiquan Deng1, Jun Cai2, 3, and Rongguang Hu1
1
Nanjing University of Aeronautics and Astronautics, China, 2The
University of Sheffield, UK, 3Nanjing University of Information
Science and Technology, China
Sensorless Control of Switched Reluctance Motors Based on High
Frequency Signal Injection
Rongguang Hu1, Zhiquan Deng1, Jun Cai2, 3, and Cheng Wang1
1
Nanjing University of Aeronautics and Astronautics, China, 2Nanjing
University of Information Science and Technology, China, 3The
University of Sheffield, UK
Stable Sensorless V/f and cosφ=1 Control for Permanent Magnet
Synchronous Motor Drives
Kai Yang, Xingxing Yang, Hongqin Xie,Yang Liu, Yingli Zhang, and
Xubiao Wei
Huazhong University of Science and Technology, China
Active Flux Based Full-Order Discrete-Time Sliding Mode Observer
for Position Sensorless IPMSM Drives
Guoqiang Zhang, Gaolin Wang, Ronggang Ni, and Dianguo Xu
Harbin Institute of Technology, China
Power Converters 4
16:00-17:30, October 24, Friday
Prof. Yaohua Li, Institute of Eletrical Engineering Chinese Academy of
Sciences, China
Prof. Chang-Chou Hwang, Feng Chia University, Taiwan
Venue:
Room C
LS6C1
16:00-16:15
LS6C2
16:15-16:30
LS6C3
16:30-16:45
LS6C4
16:45-17:00
A New Approach for Teaching Power Electronics in Electrical
Engineering Courses
Rudolf Ribeiro Riehl, José Alfredo Covolan Ulson, André Luiz
Andreoli, and Alceu Ferreira Alves
São Paulo State University, Brazil
Performance Evaluation of Single-Phase Full Bridge Grid-Connected
Converter with Reduced Switching Losses
C. Puripanyavanit, P. Wannakarn, P. Sardyoung, and V. Kinnares
King Mongkut’s Institute of Technilogy Ladkrabang, Thailand
Hierarchical Control System of Modular Multilevel Converter used in
High-Voltage Direct Current Transmission
Boran Fan1, Kui Wang1, Zedong Zheng1, Yongdong Li1, 2, and
Xiaokun Wu1
1
Tsinghua University, China, 2Xinjiang University, China
An Improved 4-step Commutation Method Application for Matrix
Converter
Yu Guo1, 2, Yougui Guo1, Wenlang Deng1, Jianlin Zhu1, and Frede
Blaabjerg3
1
Xiangtan University, China, 2University of Science and Technology
Beijing, China, 3Aalborg University, Denmark
LS6C5
17:00-17:15
Hybrid SVPWM Strategy for Diode-clamped 3H-bridge Inverter
Chengmei Lin, Gongbao Wang, Weichao Li, Shixiong Nie, and
Guangsen Wang
Naval University of Engineering, China
LS6C6
Fault Tolerant Control of Double-Stator-Winding PMSM for Open
Phase Operation Based on Asymmetric Current Injection
Zheng Wang, Jian Chen, and Ming Cheng
Southeast University, China
17:15-17:30
Session LS6E
Time:
Chairs:
Venue:
Field Computation & Analysis 3
16:00-17:30, October 24, Friday
Prof. Ichiro Miki, Meiji University, Japan
Prof. Xiaoyong Zhu, Jiangsu University, China
Room E
LS6E1
16:00-16:15
LS6E2
16:15-16:30
LS6E3
16:30-16:45
LS6E4
16:45-17:00
LS6E5
17:00-17:15
Session LS6F
Time:
Chairs:
Venue:
Full 3D Eddy Current and Temperature Field Analysis of Large
Hydro-Generators in Different Operating Conditions
Haijun Wang1, Risheng Zong2, Lei Liu1, and Shiyou Yang1
1
Zhejiang University, China, 2Zhejiang Fuchunjiang Hydropower
Equipment Co., Ltd, China
Torque Ripple Reduction in an Axial-Flux Jigsaw-Coil Permanent
Magnet Machine
Zhaoqiang Zhang1, Jon Eirik Brennvall1, and Robert Nilssen2
1
Greenway Energy AS, Norway, 2Norwegian University of Science and
Techology, Norway
Numerical Computation of Coupled Electromagnetic-Thermal Field in
an Induction Edge Heater for the Hot Strip Mill
Luyu Wang1, Zeji Wang2, Shiyou Yang1, and Yilun Li1
1
Zhejiang Univerity, China, 2Baosteel, China
Study on Main Magnetic Field of Ultra-High Voltage Magnetically
Controlled Saturated Reactor
Chuang Ma, Baodong Bai, Zhen An, and Yu Dong
Shenyang University of Technology, China
Analysis of Torque Capability and Quality in Vernier Permanent
Magnet Machines
Dawei Li, Ronghai Qu, Jian Li, Leilei Wu, and Wei Xu
Huazhong University of Science and Technology, China
Linear Machines and Magnetic Levitation
16:00-17:30, October 24, Friday
Prof. Bruno Dehez, Université catholique de Louvain (UCL), Belgium
Prof. Haitao Yu, Southeast University, China
Room F
LS6F1
16:00-16:15
Redundant Performance of Multi-primary Coupling Linear Induction
Motor
Zhaolong Sun, Weiming Ma, Mingzhong Ma, Junyong Lu, Jin Xu,
and Yuxing Zhang
Naval University of Engineering, China
LS6F 2
Optimal Design of a Linear Induction Motor for Woodworking
16:15-16:30
LS6F 3
16:30-16:45
Machine Application
Shuai Wang, Dong-Min Miao, and Jian-Xin Shen
Zhejiang University, China
Analysis of Coupling Effect of Double-side Linear Induction Motor
with Shielding Structure
Yuxing Zhang, Chengmei Lin, Jin Xu, and Zhaolong Sun
Naval University of Engineering, China
LS6F 4
16:45-17:00
Magnet Arrangement of Linear PM Vernier Machine
Takayuki Imada, and Shoji Shimomura
Shibaura Institute of Technology, Japan
LS6F 5
A New Modular and Complementary Double-Sided Linear
Flux-Switching Permanent Magnet Motor with Yokeless Secondary
Ruiwu Cao1, Wenxin Huang1, and Ming Cheng2
1
Nanjing University of Aeronautics and Astronautics, China,
2
Southeast University, China
17:00-17:15
LS6F 6
17:15-17:30
Dynamic MEC Modeling of a Linear Tubular PM Machine
Mohamed Wael Zouaghi, Amal Souissi, Imen Abdennadher, and
Ahmed Masmoudi
University of Sfax, Tunisia
ICEMS2014 Poster Presentation Schedule
Session DS1H
Oct. 23, 2014 (Thu.), 14:00-15:30 -
DS1H1 PM Motor Drives 1
Time:
Chairs:
Venue:
14:00-15:30, October 23, Thursday
Prof. Bruno Dehez, Université catholique de Louvain (UCL), Belgium
Dr. Jinhua Du, Xi’an Jiaotong University, China.
Room H
DS1H1-1
Influence of Magnet Layer Number on Electromagnetic Performance
of Interior Ferrite Permanent Magnet Synchronous Machine
Weizhong Fei, Wenyi Liang, and Patrick Chi-Kwong Luk
Cranfield University, UK
DS1H1-2
Analysis and Determination of Mechanical Bearing Load Caused by
Unbalanced Magnetic Pull
Andreas Ruf, Michael Schröder, Aryanti Putri, David Franck, and Kay
Hameyer
RWTH Aachen University, Germany
DS1H1-3
Calculation Method for Single-Phase Line-Start Permanent Magnet
Synchronous Motor
Yudai Suzuki, Tsuneo Takegami, Kazuo Tsuboi, Isao Hirotsuka, and
Masanori Nakamura
Chubu University, Japan
DS1H1-4
Investigate the Influence of Magnetic Bridge Design on Mechanical
Strength and Electromagnetic Characteristics in High Speed IPM
Machines
Jing Rao, Ronghai Qu, Jimin Ma, and Wei Xu
Huazhong University of Science and Technology, China
DS1H1-5
Analytical Modeling of Multi-Segment and Multilayer Interior
Permanent Magnet Machines
Li Zhu1, S. Z. Jiang1, Z. Q. Zhu2, and C. C. Chan3
1
Shanghai Jiao Tong University, China, 2University of Sheffield, UK,
3
University of Hong Kong, Hong Kong
DS1H1-6
An Optimized Method Based on Maximum Torque-Per-Ampere
Control for Permanent Magnet Synchronous Motor
Le Yang, Kexun Yu, Qilin You, and Qingming Xin
Huazhong University of Science and Technology, China
DS1H1-7
Research on Optimal Design of Permanent Magnet Synchronous
Motors Based on Field-Circuit Coupled Method
Yaojing Feng1, Shoudao Huang1, Kai Yang2, and Xuan Wu1
1
Hunan University, China, 2Huazhong University of Science and
Technology, China
DS1H1-8
Influence of Magnet Shape on Torque Behavior in Surface-Mounted
Permanent Magnet Motors
Huangda Lin, Dong Wang, Dezhi Liu, and Junquan Chen
Naval University of Engineering, China
DS1H1-9
Demagnetization Conditions Comparison for Line-Start Permanent
Magnet Synchronous Motors
Wei-fu Lu, Hai-sen Zhao, and Shi Liu
North China Electric Power University, China
DS1H1-10
Optimization and Performance Analysis of E-Core and C-Core
Flux-Switching Permanent-Magnet Machines for Electric Vehicle
Applications
Yitong Li, and Wei Xu
Huazhong University of Science and Technology, China
DS1H1-11
Mitigation of Acoustic Noise by Minimize Torque and Radial Force
Fluctuation in Fault Tolerant Permanent Magnet Machines
Yanxin Mao, Guohai Liu, Qian Chen, and Huawei Zhou
Jiangsu University, China
DS1H1-12
Rotor Strength Analysis for High Speed Permanent Magnet Machines
Liangliang Chen, and Changsheng Zhu
Zhejiang University, China
DS1H1-13
Comparison of Conventional and Consequent Pole Interior Permanent
Magnet Machines for Electric Vehicle Application
Leilei Wu1, 2, and Ronghai Qu1
1
Huazhong University of Science and Technology, China, 2Linyi
University, China
DS1H1-14
Optimization Design of Line-Start Permanent Magnet Synchronous
Motor Based on Ant Colony Algorithm
Ying Xie1, Jixing Li1, Zhongxue Yang2, and Chunmei Qu1
1
Harbin University of Science and Technology, China, 2Northeast
Petroleum University, China
DS1H1-15
Design of a Novel Axial-Radial Flux Permanent Magnet Motor
Xubiao Wei, Kai Yang, Zhicheng Pan, Hongqin Xie, Cheng Zhu, and
Yingli Zhang
Huazhong University of Science and Technology, China
DS1H2 Induction Motor Drives
Time:
Chairs:
Venue:
14:00-15:30, October 23, Thursday
Prof. Baodong Bai, Shenyang University of Technology, China
Prof. Yangsheng Chen, Zhejiang University, China
Room H
DS1H2-1
Experimental Study of Losses During High-Speed Constant-Voltage
Operation of Three-Phase Squirrel-Cage Induction Motors
Satoshi Goto1, Isao Hirotsuka1, Masanori Nakamura1, Kazuo Tsuboi1,
and Takayuki Mizuno2
1
Chubu University, Japan, 2Meidensha Corporation, Japan
DS1H2-2
Slip Frequency Correction Method for Indirect Vector Control System
Considering Parameters Deviation
Mengyu Ding, and Chenglin Gu
Huazhong University of Science and Technology, China
DS1H2-3
Soft Starting Control Scheme for Three-Phase Induction Motor Fed by
PWM AC Chopper
Veera Thanyaphirak, Vijit Kinnares, and Anantawat Kunakorn
King Mongkut's Institute of Technology Chaokuntaharn Ladkrabang,
Thailand
DS1H2-4
Research of the Influence of Different PWM Inverters on the Iron
Losses for Induction Motors
Zhi-Cheng Sun, Jian-Xin Shen, Meng-Jia Jin, and He Hao
Zhejiang University, China
DS1H2-5
Analysis of Electromagnetic Torque of Induction Machines with the
Load Torque Changes Suddenly
Xinjian Cai1, 2, Zhenxing Wu3, and Le Sun4
1
Huazhong University of Science and Technology, China, 2Fujian
University of Technology, China, 3Naval University of Engineering,
China, 4Xi’an Jiaotong University, China
DS1H2-6
Research on a Static Excitation Control Method for the High-Power
Induction Generator with a H-Bridge Cascaded Converter Topology
Chi Sun, Liang-deng Hu, and Sheng Ai
Naval University of Engineering, China
DS1H2-7
Predictive Current Control for Dual Three Phase Induction Machine
with Phase Locked Loop based Electromotive Force Prediction
Jie Zhang, Jianyun Chai, Xudong Sun, and Haifeng Lu
Tsinghua University, China
DS1H2-8
A Direct Torque Control Strategy of Five-Phase Induction Motor with
Duty Cycle Optimization
Ting Wang, and Jiaqiang Yang
Zhejiang University, China
DS1H2-9
Loss Minimization of Speed Controlled Induction Machines in
Transient States considering System Constraints
Zheng Hu, Qian Liu, and Kay Hameyer
RWTH Aachen University, Germany
DS1H2-10
Stator Winding Design of Induction Motors for High Efficiency
Li Zhang, Yunkai Huang, Jianning Dong, Baocheng Guo, and Tao
Zhou
Southeast University, China
DS1H2-11
Analytical Method for Starting Performance Calculation of Induction
Motors Considering Skin Effect and Leakage Flux Saturation
Run-hao Piao1, 2, Haisen Zhao1, Dongdong Zhang1, and Jiaxuan Li1
1
North China Electric Power University, China, 2Kimchaek University
of technology, Korea
DS1H2-12
Research on Electrostatic Shield for Discharge Bearing Currents
Suppression in Variable-Frequency Motors
Jing Quan, Baodong Bai, Yu Wang, and Weifeng Liu
Shenyang University of Technology, China
DS1H2-13
Comparison between Induction Machine and Interior Permanent
Magnet Machine for Electric Vehicle Application
Y. Guan1, Z. Q. Zhu1, I.A.A Afinowi1, J. C. Mipo2, and P. Farah2
1
University of Sheffield, UK, 2Valeo Powertrain Electric Systems,
France
DS1H2-14
The Research of Marine Shaft Generator System Based on Brushless
Doubly-Fed Machine
Ju-ming Gao, Shan-ming Wan, and Li-li Liu
Huazhong University of Science and Technology, China
DS1H2-15
Five-leg Voltage Source Inverter for Driving Two Single-Phase
Induction Motors
Sirichai Dangeam, and Vijit Kinnares
King Mongkut’s Institute of Technology Ladkrabang, Thailand
DS1H2-16
Analytical Investigation of Sideband Torque Ripple in Induction
Machine Drive with SPWM and SVPWM Techniques
Wenyi Liang, Weizhong Fei, and Patrick Chi-Kwong Luk
Cranfield University, UK
DS1H2-17
DTC Strategies Dedicated to IM Drives Fed by Reduced-Structure
Inverters Emulating the Conventional One: Application to Low-Cost
Automotive Actuators
Ameni Ouarda, Imen Nouira, Bassem El Badsi, and Ahmed
Masmoudi
Sfax Engineering National School, Tunisia
DS1H3 Traction Motors & Transportation
Time:
Chairs:
Venue:
14:00-15:30, October 23, Thursday
Prof. Jikai Si, Henan Polytechnic University, China
Prof. Zhuoran Zhang, Nanjing University of Aeronautics and
Astronautics, China
Room H
DS1H3-1
Analysis and Optimized Control of Emergency Traction by Storage
Battery for Urban Rail Transit Vehicle
Ke Wang, Qiongxuan Ge, and Yaohua Li
Chinese Academy of Sciences, China
DS1H3-2
A New Active Dynamic Voltage Equalization Technology for the
Series Connected Ultracapacitors Used in EV
Shichuan Ding1, 2, Ming Cheng1, Wei Hua1, and Chao Hu1
1
Southeast University, China, 2Anhui University, China
DS1H3-3
Modeling and Simulation of Shipboard DC Power System
Jia Guo, Li Sun, Shuai Wang, and Weixin Wang
Harbin Institute of Technology, China
DS1H3-4
Research on Switched Reluctance Motor Drive System for Electric
Vehicles
Guojun Yu2, He Cheng2, and Yingjie Huo1
1
Lanzhou Institute of Space Technology and Physics, China, 2China
University of Mining & Technology, China
DS1H3-5
Fuel Cell Applications on More Electrical Aircraft
Shanshan Wu1, and Yongdong Li2
1
Commercial Aircraft Corporation of China, Ltd., China, 2Tsinghua
University, China
DS1H3-6
An Inductively Coupled Power Transfer System based Power Control
for Motor Drives of Rail Transit Vehicle
Pengfei Wu1, 2, Liming Shi1,Hua Cai1, and Yaohua Li1
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
DS1H3-7
A Novel Modular Multistage Axial-Flux Permanent Magnet Machine
for Electric Vehicles
Hongqin Xie, Xubiao Wei, and Kai Yang
Huazhong University of Science and Technology, China
DS1H3-8
Alternative Stator for New Brushless Dual-Rotor Flux-Switching
Permanent Magnet Motor for Extended Range Electric Vehicles
Zixuan Xiang, Li Quan, Zaiyun Zong, Yejun Gu, and Jianing Yin
Jiangsu University, China
DS1H3-9
Performance Comparisons of Emerging Move-and-Charge
Technologies for Electrical Vehicles
Wenlong Li1, K.T. Chau1, and T.W. Ching1, 2
1
The University of Hong Kong, Hong Kong, 2University of Macau,
China
DS1H3-10
Optimal Idling Speed Control of Direct-Drive Electric Vehicle Launch
in Consideration of Drive Comfort
Ping Xiong, and Chenglin Gu
Huazhong University of Science and Technology, China
DS1H3-11
A Review of Electromagnetic Fields Concerns on HEVs/EVs
Lili Wang, Wei Liu, Jing Wang, and Jianyu Guo
State Grid, China
DS1H3-12
Comparison of Double-Stator Flux-Switching Permanent Magnet
Machine and Double-Stator Permanent Magnet Synchronous Machine
for Electric Vehicle Applications
Zaiyun Zong, Li Quan, and Zixuan Xiang
Jiangsu University, China
DS1H3-13
Anti-slip Control of Electric Vehicles Based on Disturbance Observer
and PID Controller
Xing Hu, Jianzhong Zhang, and Shuai Xu
Southeast University, China
DS1H3-14
Method Controlling Four Sets of Permanent Magnet Synchronous
Motor by One Inverter on a Railway Vehicle
Takuma Ito1, Hiromi Inaba1, Keiji Kishine1, Mitsuki Nakai2, and
Keisuke Ishikura1
1
The University of Shiga Prefecture, Japan, 2Ishida Co., Ltd., Japan
DS1H3-15
The Influence on Characteristics of Movable Loosely Coupled
Transformer its in Urban Railway System
Yajie Zhao1, 2, Yumei Du1, Hua Cail1, 2, Ruihua Zhang1, and Liming
shi1
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
DS1H3-16
Utilization of the Battery Recovery Effect in Hybrid and Electric
Vehicle Applications
Andreas Baumgardt, Florian Bachheibl, and Dieter Gerling
University of Federal Defense Munich, Germany
DS1H3-17
Fault Current Analysis of DC Electric Railway Feeding Systems using
Superconducting Power Cables
K. Qian1, H. Ohsaki1, and M. Tomita2
1
The University of Tokyo, Japan, 2Railway Technical Research
Institute, Japan
DS1H3-18
Development of Switched Reluctance Traction Drive for dumper
BelAZ-7513
G.K. Ptakh1, 2, D.A. Zvezdunov2, R.R. Mustafaev2, V.S. Shapovalov2,
and A.E. Yakovenko1, 2
1
Platov South-Russian State Polytechnic University, Russia, 2"VIEM"
Ltd., Russia
DS1H4 Renewable Energy Systems 1
Time:
Chairs:
Venue:
14:00-15:30, October 23, Thursday
Prof. Markus Henke, TU Braunschweig, IMAB, Germany
Dr. Jianfei Pan, Shenzhen University, China
Room H
DS1H4-1
Research of DC Micro-grid Based on Sustainable Buildings and
Electric Vehicles
Ming Meng1, Mingwei Guo1, Yaning Yuan1, Li Jiang2, Jian Liu2,
Dalong Hu2, Haiyang Cong3, and Dan Hao4
1
North China Electric Power University, China, 2State Grid Liaoning
Electric Power Company Limited Economic Research Institute, China,
3
State Grid Liaoning Electric Power Supply CO., LTD., China,
4
Liaoning Electric Power Survey & Design Institute, China
DS1H4-2
An Efficient Offshore Wind-Wave Hybrid Generation System Using
Direct-Drive Multitoothed Rotating and Linear Machines
Chunhua Liu, K.T. Chau, Christopher H.T. Lee, and Fei Lin
The University of Hong Kong, Hong Kong
DS1H4-3
A New Control Strategy of Uninterrupted Distributed Generation
System
Jinlong Wang, Jinbin Zhao, Keqing Qu, and Fen Li
Shanghai University of Electric Power, China
DS1H4-4
Development Tendency of Positive Feedback Type Anti-Islanding of
American Companies
Ji-Won Jeong, Dong-Hee Kim, and Byoung-Kuk Lee
Sungkyunkwan University, Korea
DS1H4-5
Frequency Control of Islanded Microgrid Based on
Wind-PV-Diesel-Battery Hybrid Energy Sources
Yiwei Ma1, 2, Ping Yang1, 2, Yuewu Wang1, 2, Shaoxiong Zhou2, and
Peng He2
1
South China University of Technology, China, 2National-Local Joint
Engineering Laboratory for Wind Power Control and Integration
Technology, China
DS1H4-6
DC-Bus Hybrid Energy Storage Devices Cooperation Control Strategy
for Stand-Alone Inverter under Imbalance Load
Weixin Wang, Jiandong Duan, Fengjiang Wu, Li Sun, and Shuai Wang
Harbin institute of technology, China
DS1H4-7
An Intentionally Seamless Transfer Strategy between Grid-connected
and Islanding Operation in Micro-grid
Shunyu Wu1,2,3, Shirong Liu1,2, Xueting Chen1,2, Lingwei Zheng1,2,
and Jian Zhu1,2
1
Hangzhou Dianzi University, China, 2Research Center of Detecting
Instrument and Automation System Integration Technology, China,
3
North China Electric Power University, China
DS1H4-8
Equivalent Voltage and Current Models for PEM Fuel Cell Generation
System in Grid-connected Systems
Jian Zhu, Shunyu Wu, Xiaolan Luo, and Shirong Liu
Hangzhou Dianzi University, China
DS1H4-9
A Damping Injection Control of Isolated Bidirectional DC-DC
Converters based on the Load Parameter Identification
Junjie Ge, Zhengming Zhao, Junchao Ma, Fanbo He, Liqiang Yuan,
and Ting Lu
Tsinghua University, China
DS1H4-10
An Improved Discharge Control Strategy with Load Current and
Rotor Speed Compensation for High-Speed Flywheel Energy Storage
System
Xiang Zhang, and Jiaqiang Yang
Zhejiang University, China
DS1H4-11
Capacitor Voltage Balancing of a Three-Level Bi-Directional
Buck-Boost Converter for Battery Energy Storage System
Haixv Shi, Kui Wang, Xi Xiao, and Kai Sun
Tsinghua University, China
DS1H4-12
Power Compensation in the Microgrid by SMES Using the Current
Source Inverters
Yuki Kawahara, Taku Masuda, Masafumi Miyatake, and Orie
Sakamoto
Sophia University, Japan
DS1H4-13
Research of EV’s Charging and Discharging Control Considering
Demand Response
Huachun Han1, 2, Haiping Xu1,Wei Zhao1, 2, and Zengquan Yuan1
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Science, China
DS1H5 Synchronous Machines
Time:
Chairs:
Venue:
14:00-15:30, October 23, Thursday
Prof. Takashi Abe, Nagasaki University, Japan
Prof. Kai Yang, Huazhong University of Sciense & Technology, China
Room H
DS1H5-1
The Stator Bar’s Transient Temperature Characteristic of Evaporative
Cooling Generator-motor
Jinxiu Chen1, 2, and Lin Ruan1
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Science, China
DS1H5-2
Effect of Slot-and-Pole Combination on the Flux-Weakening
Properties of Fractional-Slot Concentrated Windings
Chengyu Wang, Chuang Liu, Renhua Jiang, Jie Zhang, and Yinhang
Ning
Nanjing University of Aeronautics and Astronautics, China
DS1H5-3
Quantitative Analysis for Influence of Structure Parameters on the Slot
Harmonic in Fractional-Slot Permanent Magnet Motors
Yanwu Xu, Jiwen Zhao, and Xuemin Fu
Anhui University, China
DS1H5-4
Studies on the Structure of Radial Ventilation Channel to Improve the
Cooling Capacity of Large Turbo Generator Stator
Bin Xiong1, 2, Guobiao Gu2, Lin Ruan2, Zhenguo Li2, Deping Fu2, Rui
Cao2, Shuqin Guo2, and Jinshui Gao 2
1
University of Chinese Academy of Sciences, China, 2Chinese
Academy of Sciences, China
DS1H5-5
Influence of the stator deformation on the behaviour of a claw-pole
generator
S.Liu1, 2, S.Clenet1, T.Coorevits1, and JC.Mipo2
1
Arts et Métiers ParisTech, France, 2VALEO-Systèmes Electriques,
France
DS1H5-6
Comparison of loss and thermal analysis according to square
conductor division considering skin effect
Dong-Hyuk Park1, Sang-Hyeok Seo1, Yong-Jae Kim2, and Sang-Yong
Jung1
1
Sungkyunkwan University, Korea, 2Chosun University, Korea
DS1H5-7
Research on Self-Excited Initiation of a Medium-Voltage DC
(MVDC) Multiphase Synchronous Generator-Rectifier System
Xinqiang Yi, Dong Wang, Yunjun Guo, Zhenzhong Su, Kun Wei, and
Xiaofei Zhai
Naval University of Engineering, China
DS1H5-8
Analytical Calculation of Damper Winding Losses in Large
Hydrogenerators
Yun Lu1, Jianjun Liu1, 2, Libing Zhou1, and Huilin Kang1
1
Huazhong University of Science and Technology, China, 2Dongfang
Electric Machinery Co., Ltd., China
DS1H5-9
Torque Ripple Reduction in Three-Stage Brushless Synchronous
Motor Based on α-β-γ Filter
Peng Ma, Weiguo Liu, Shuai Mao, Jichang Peng, and Guangzhao Luo
Northwestern Polytechnical University, China
DS1H5-10
Influence of Manufacturing Tolerances on Cogging Torque of IPMSM
for EPS Application
Yong-Beom Kim, Hae-Joong Kim, Kyung-Tae Jung, and Jung-Pyo
Hong
Hanyang University, Korea
DS1H5-11
Stator Teeth Shape Design for Torque Ripple Reduction in
Surface-Mounted Permanent Magnet Synchronous Motor
Kyung-Sik Seo1, Yong-Jae Kim2, and Sang-Yong Jung1
1
Sungkyunkwan University, Korea, 2Chosun University, Korea
DS1H5-12
New Permanent Magnet Synchronous Motor with Reduced Rare Earth
Magnets
Akitoshi Yamada, and Ichiro Miki
Meiji University, Japan
DS1H5-13
A Low-Cost Permanent Magnet Synchorous Motor with SMC and
Ferrite PM
Chengcheng Liu1, Jianguo Zhu2, Youhua Wang1, Gang Lei2, Youguang
Guo2, and Xiaojing Liu1
1
Hebei university of technology, China, 2University of Technology,
Sydney, Australia
DS1H5-14
Comparison of Electrically Excited and Interior Permanent Magnet
Machines for Hybrid Electric Vehicle Application
W. Q. Chu, Z.Q. Zhu, J. Zhang, X. Ge, X. Liu, D. Stone, and M.
Foster
University of Sheffield, UK
DS1H5-15
The Shape Design of IPMSM for the Efficiency Improvement
Dong-Yeong Kim1, Gyu-Tak Kim1, and Heung-Kyo Shin2
1
Changwon National University, Korea, 2Gyeongsang National
University, Korea
DS1H5-16
Comparative Study of Novel Biased Flux Permanent Magnet Machine
with Doubly Salient Permanent Magnet Machine
J. T. Shi, Z. Q. Zhu, D. Wu, and X. Liu
University of Sheffield, UK
DS1H5-17
Characteristic Analysis of Spoke-Type IPMSM Corresponding to the
rib structure
Chan-Hee Hong, Hyun-Soo Seol, Hyun-Woo Jun, Huai-Cong Liu, and
Ju Lee
Hanyang University, Korea
DS1H5-18
A First-Prototype of the Claw Pole Type Half-Wave Rectified Variable
Field Flux Motor
Takashi Abe, Ryohei Oba, and Tsuyoshi Higuchi
Nagasaki University, Japan
DS1H5-19
A Novel Claw Pole Permanent Magnet Motor with SMC and Ferrite
PM
Chengcheng Liu1, Jianguo Zhu2, Youhua Wang1, Gang Lei2, Youguang
Guo2, and Xiaojing Liu1
1
Hebei University of Technology, China, 2University of Technology,
Sydney, Australia
DS1H6 PM Generator Systems
Time:
Chairs:
Venue:
14:00-15:30, October 23, Thursday
Prof. Xiuhe Wang, Shandong University, China
Prof. Chang-Eob Kim, Hoseo University, Korea
Room H
DS1H6-1
Design of a Twelve-Phase Flux-Switching Permanent Magnet
Machine for Wind Power Generation
Lingyun Shao, Wei Hua, and Ming Cheng
Southeast University, China
DS1H6-2
Predictive Direct Power Control for Permanent Magnet Linear
Generator Side Converter
Guangqing Bao, Jingyi Wen, Xiaolan Wang, and Dongsong Luo
Lanzhou University of Technology, China
DS1H6-3
Dynamic Performance of DC-Link Voltage for Automotive Hybrid
Excitation Brushless Starter/Generator with Trapezoidal Back EMF
Jiaqun Xu, and Jie Jiang
Beijing University of Technology, China
DS1H6-4
Electromagnetic Design and Analysis of a Novel Flux-Concentrated
Transverse Flux Permanent Magnet Disk Generator
Jianhu Yan1, Qiang Li1, Heyun Lin2, and Yi Feng2
1
Nanjing University of Science and Technology, China, 2Southeast
University, China
DS1H6-5
Optimal Design of Inner Evaporative Cooling Permanent Magnet
Wind Power Generator
Wang Li, Haifeng Wang, and Guobiao Gu
Chinese Academy of Sciences, China
DS1H6-6
The Influence of Stator Pole Shape and Its Arrangement on Cogging
Torque for Double-Sided AFPM Generator
Chang-Eob Kim, Joong-Keun Jang, and Sung-Jun Joo
Hoseo University, Korea
DS1H6-7
Design and Research of 5 MW Permanent Magnet Synchronous
Generators for Wind Turbines
Bei Wei, Xiuhe Wang, and Xiulei Zhao
Shandong University, China
DS1H6-8
Design and Optimization of a Nine-Phase Flux-Switching PM
Generator for Wind Power Systems
Feng Li, Wei Hua, and Ming Cheng
Southeast University, China
DS1H6-9
Analysis of Losses in Axial Field Variable Flux Permanent Magnet
Synchronous Machine with Mechanical Device
Xiping Liu, Chao Zhang, Dong Chen, Yuefei Huang, Jianwei Liang,
and Tao Wang
Jiangxi University of Science and Technology, China
DS1H6-10
Performance and Demagnetization Analysis of the Permanent Magnet
Generator With FSCW for Small Scale Wind Power Systems
Aimeng Wang, Chunmei Wang, and Hui Wang
North China Electric Power University, China
DS1H6-11
Grid-Connected Control of High-Speed Permanent Magnetic
Generator Based on Z-Source Inverter
Keyuan Huang, Zhi Jiang, Li Wang, and Shoudao Huang
Hunan University, China
DS1H6-12
Influence of Magnet Pole Shifting on Cogging Torque for PMSG
Application
Aimeng Wang, Dejun Ma, and Siwan Shu
North China Electric Power University, China
DS1H6-13
Control Strategy of Indirect Matrix Converter-Permanent Magnet
Synchronous Generator System
Jinliang Bian, Bo Zhou, Jiaxing Lei, and Xianhui Qin
Nanjing University of Aeronautics and Astronautics, China
DS1H6-14
Investigation on Hybrid Ratio between PM and Current Excitation
Sources for High-Speed Synchronous Generator
Nan Lin, Dong Wang, Yang Shen, and Kun Wei
Naval University of Engineering, China
DS1H6-15
Material-Saving Optimization of High-Power Direct-Driven
Permanent Magnet Wind Generator
Kun Wei, Dong Wang, Zhongjun Yu, and Huangda Lin
Naval University of Engineering, China
DS1H6-16
The Influence of Rotor Configurations on the Performance of an
Regenerative Permanent Magnet Retarder
Shihua Wu1, Weiwei Fan1, and Shumei Cui2
1
Harbin Institute of Technology at Weihai, China, 2Harbin Institute of
Technology, China
Session DS2H
Oct. 23, 2014 (Thu.), 16:00-17:30 -
DS2H1 PM Motor Drives 2
Time:
Chairs:
Venue:
DS2H1-1
16:00-17:30, October 23, Thursday
Prof. Mi-Ching Tsai, National Cheng Kung University, Taiwan
Prof. Jiabing Hu, Huazhong University of Sciense & Technology, China
Room H
Multi-objective Optimization Design of Interior Permanent-Magnet
Synchronous Motors for Improving the Effectiveness of Field
Weakening Control
Ming-Tsung Chui1, Jui-An Chiang1, Jui-Min Lee1, and Zwe-Lee
Gaing2
1
New Widetech Company, Taiwan, 2Kao-Yuan University, Taiwan
DS2H1-2
Flux-Weakening Performance Comparison of Conventional and
E-Core Switched-Flux Permanent Magnet Machines
I.A.A. Afinowi1, Z. Q. Zhu1, D. Wu1, Y. Guan1, J. C. Mipo2, and P.
Farah2
1
University of Sheffield, UK, 2Valeo, France
DS2H1-3
Simulation of Flux-Weakening Control of PMSM for Electrical
Vehicle
Xiangyu Du, Jialei Hu, and Xuguang Li
Shanghai Jiao Tong University, China
DS2H1-4
A New Speed Control Strategy for Interior Permanent Magnet Motor
at Full Speed Range
Wangyu Bin, and Sunjian Xin
China University of Petroleum, China
DS2H1-5
Nonlinear Speed Control for PMSM Using Mixed H2/H∞ State Output
Feedback Control
Shuai Wang1, Ke Zhao1,Weixin Wang1, Li Sun1, and Dan Li2
1
Harbin Institute of Technology, China, 2Tangshan Water Company,
China
DS2H1-6
Anti-Windup Speed Regulator Based on Model Predictive Control
Shuang Wang, Wenju Zhu, Surong Huang, and Fei Hou
Shanghai University, China
DS2H1-7
Adaptive Sliding Mode Control for the Speed Regulation of PMSMs
with Load Change
Chaoxu Mu1, 3, Wei Xu2, and Changyin Sun3
1
Tianjin University, China, 2Huazhong University of Science and
Technology, China, 3Southeast University, China
DS2H1-8
An Improved Current Predictive Control Algorithm in the Application
of 22 KW Variable Speed Permanent Magnet Synchronous Motor
Hang Zhang, and WeiGuo Liu
Northwestern Polytechnical University, China
DS2H1-9
Dead Time Influence and Compensation of Direct Torque Control
Xin Qiu, Wenxin Huang, Feifei Bu, and Weijia Cui
Nanjing University of Aeronautics and Astronautics, China
DS2H1-10
Direct Instantaneous Torque Control of Switched Reluctance Motor
Based on Adaptive Backstepping
Ruiwei Zhang1, Yingchao Zhang1, Xisen Qian1, Ting Lu2, and
Zhengming Zhao2
1
Chongqing Communication Institute, China, 2Tsinghua University,
China
DS2H1-11
Backstepping Direct Torque Control of Permanent Magnet
Synchronous Motor with RLS Parameter Identification
Yanping Xu, Yazhou Lei, and Dengzhuo Sha
Xi'an University of Technology, China
DS2H1-12
Research on Direct Torque Control for Permanent Magnet
Synchronous Motor Drives
Xiaomin Zhou, Chenlong Wu, and Shuo Zhang
University of Science and Technology Beijing, China
DS2H1-13
Improved Model-Based Predictive Torque Control Algorithm with
Modified Modulation Index for Doubly Salient Permanent Magnet
Synchronous Machines
Fengxiang Chen, Wei Xu, and Ronghai Qu
Huazhong University of Science and Technology, China
DS2H1-14
Research on Sensorless DTC of PMSM Based on Non-Singular
Terminal-Sliding-Mode Observer
Shuo Chen1, Liping Fan1, Mo Lv1, and Mineo Tsuji2
1
Fuzhou University, China, 2Nagasaki University, Japan
DS2H1-15
Improved Model Predictive Control of Permanent Magnet
Synchronous Motor
Xuan Wu, Hui Wang, Shoudao Huang, and Yaojing Feng
Hunan University, China
DS2H1-16
The Electromagnetic Performance Calculation and Comparison of
Flux Reversal Machine with Different Winding Topologies
Yubo Yang1, Jingwei Zhang2, Lin Ma2, Xiuhe Wang1, and Ning Wang1
1
Shandong University, China, 2Corporate Technology, Siemens Ltd.
Beijing, China
DS2H2 Machine Modeling and Design
Time:
Chairs:
Venue:
16:00-17:30, October 23, Thursday
Prof. Isao Hirotsuka, Chubu University, Japan
Prof. Ronghai Qu, Huazhong University of Sciense&Technology, China
Room H
DS2H2-1
A Complete Model Characterization of Dual Three-Phase Permanent
Magnet Brushless Machine for electromechanical servo actuation
Zhanqiang Luo1, 2, Deliang Liang1, Xing Liu1, and Xintuan Yang2
1
Xi’an Jiaotong University, China, 2Aviation Industry Corporation Of
China Qing’an Group Co. , China
DS2H2-2
Design and Modeling of Axial Flux Permanent Magnet Machine with
Yokeless and Segment Armature Using Magnetic Equivalent Circuit
Tao Zhou, Yunkai Huang, Jianning Dong, Baocheng Guo, and Li
Zhang
Southeast University, China
DS2H2-3
Software Based Interaction of Multiple Domains for the Design of
Electrical Machines
Jörg Kammermann, Christiane Bertram, Sonja Flügel, Quirin Hecker,
Wolfgang Meyer, and Hans-Georg Herzog
Technische Universität München, Germany
DS2H2-4
Simulation for Operating Conditions Transition of Asynchronous
Machine in Blower Driving System of Chemical Industry for Flue Gas
Recovery
Tianmin Chen, Xiuhe Wang, Yubo Yang, and Zongsheng Zhang
Shandong University, China
DS2H2-5
Study of Multiphase Modular Stator SPM based on Phase Variable
Model
Xi Peng, Libing Zhou, Jin Wang, and Huilin Kang
Huazhong University of Science and Technology, China
DS2H2-6
Overvoltage Mitigation of Submersible Motors with Long Cables of
Different Lengths
Yue Liu, Liguo Wang, Han Gao, Haicong Zhang, and Dianguo Xu
Harbin Institute of Technology, China
DS2H2-7
Study on Impedance Characteristic of Aircraft Cables
Meng Xie1, Hongxia Wang2, Xiaobin Zhang1, Zhaohui Gao1, and
Weilin Li1
1
Northwestern Polytechnical University, China, 2China AeroPolytechnology Establishment, China
DS2H2-8
Methodical Considerations for Setting Up Space-Resolved
Lumped-Parameter Thermal Models for Electrical Machines
Fang Qi, Alexander Stippich, Moritz Guettler, Markus Neubert, and
Rik W. De Doncker
RWTH Aachen University, Germany
DS2H2-9
Design of a New Magnetic-Planetary-Geared Outer-Rotor
Permanent-Magnet Brushless Motor for Electric Vehicles
Renzhong Zhang, Xiaoyong Zhu, and Long Chen
Jiangsu University, China
DS2H2-10
Design of a Permanent Magnet Configuration for Nuclear Magnetic
Resonance Logging
Yanli Zhang, Xin Geng, Dianhai Zhang, and Dexin Xie
Shenyang University of Technology, China
DS2H2-11
Design and Analysis of a Dual-Rotor Radial Flux Permanent-Magnet
Generator
Peifeng Xu, Xianxing Liu, Kai Shi, and Feng Xiao
Jiangsu University, China
DS2H2-12
Design and Evaluation of a New Flux-Intensifying Permanent Magnet
Brushless Motor
Bing Yan, Xiaoyong Zhu, and Long Chen
Jiangsu University, China
DS2H2-13
Design of Mining Flameproof Voltage Stabilizing Transformer
Adopting Adaptive Fuzzy PID Controller
Qingshan Wang, Deliang Liang, and Jinhua Du
Xi'an Jiaotong University, China
DS2H2-14
Theoretical Analysis and Simulation Study of Resonant Coupling Air
Core Power Transformers
Kang Li1, Guoqiang Zhang1, Runrui Guo1, and Hassan Javed1, 2
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
DS2H2-15
Research on Economic Remaining Life of Power Transformers Based
on the Lifetime Data
Wanfang Zhao, Huifang Wang, and Dongyang Lin
Zhejiang University, China
DS2H2-16
Joint Simulation Analysis of Brushless DC Motor and Control System
Yuanfeng Huang, Haifeng Wang, and Wang Li
Chinese Academy of Sciences, China
DS2H2-17
Modeling Analysis of Switched Reluctance Motor with ANFIS and
D-FNN
Aide Xu
Dalian Maritime University, China
DS2H2-18
Optimization Design of High Efficiency Variable Frequency Induction
Motor Based on Finite Element Analysis
Gang Cui, Lifei Liu, Shan Li, Pingxi Yang, Fan Yang, Lin Chen, and
Jiwei Dong
Shanghai Marine Equipment Research Institute, China
DS2H2-19
State of Art of Sequential Optimization Strategies for the Design of
Electromagnetic Devices
Gang Lei1, Jianguo Zhu1, Youguang Guo1, and Yang Zou2
1
University of Technology, Sydney, Australia, 2Huazhong University of
Science and Technology, China
DS2H3 Sensorless Control Techniques
Time:
Chairs:
Venue:
16:00-17:30, October 23, Thursday
Prof. Jikai Si, Henan Polytechnic University, China
Dr. Bo Zhao, Harbin Institute of Technology, China
Room H
DS2H3-1
Improved Square-Wave Voltage Injection Method for Sensorless
Control of PMSM and Its Adaptability to Motor Parameter Variations
Zhen Guo, Jianmin Wang, and Xiaomin Zhao
Shandong University, China
DS2H3-2
Analysis and Improvement of Pulsating Current Injection Based
Sensorless Control of Permanent Magnet Synchronous Motor
Jianmin Wang, Xiaomin Zhao, and Zhen Guo
Shandong University, China
DS2H3-3
Sensorless Control of SRM Based on Improved Simplified
Flux-Linkage Method
Yunlong Zhang, Chuang Liu, and Lei Zhang
Nanjing University of Aeronautics and Astronautics, China
DS2H3-4
Rotor Position and Speed Estimation of Interior Permanent Magnet
Synchronous Motor using Unscented Kalman Filter
Lu An, and Kay Hameyer
RWTH Aachen University, Germany
DS2H3-5
A Novel Strategy of Initial Rotor Position Detection for Surface
Mounted Permanent Magnet Synchronous Machines
Jie Li, Bo Zhou, Bing Liu, Long Wang, and Tianheng Ni
Nanjing University of Aeronautics and Astronautics, China
DS2H3-6
Position and Radial Displacement Sensorless Control Method for
Bearingless Switched Reluctance Motors
He Zhao, Xin Cao, and Zhiquan Deng
Nanjing University of Aeronautics and Astronautics, China
DS2H3-7
Design on Controller of Claw Pole Motor with PM Outer Rotor
Fengge Zhang, Xueliang Bian, Guangwei Liu, and Xingang Zhao
Shenyang University of Technology, China
DS2H3-8
Self-sensing Active Magnetic Bearing Using Wavelet Based Position
Estimation Algorithm
Jie Yu, and Changsheng Zhu
Zhejiang University, China
DS2H3-9
Observer Based Sensorless Predictive Hysteresis Control of a
Transverse Flux Machine
J. Bauer, and A. Kleimaier
University of Applied Sciences Landshut, Germany
DS2H3-10
Study on Stator Flux Oriented Sensorless Induction Motor Control
System
Baishan Mei, and Jiangbo Feng
Shanghai University of Electric Power, China
DS2H3-11
Low-speed Direct-driven Sensorless Control Including Zero-speed for
Switched Reluctance Motor Based on Dynamic Inductance Model
Xulong Zhang1, Feng Wang1, and Xuanqin Wu2
1
Xuzhou Institute of Technology, China, 2China University of Mining
and Technology, China
DS2H3-12
Research on Initial Rotor Position Estimation for SPMSM
Bing Liu, Bo Zhou, Haidong Liu, Jie Li, Long Wang, and Qinglong
Wang
Nanjing University of Aeronautics and Astronautic, China
DS2H3-13
Research of Direct Power Control of PWM Rectifier Based on Virtual
Flux
Guolong Yu, Yi Wang, Shang Ma, and Lirong Zhang
North China Electric Power University, China
DS2H3-14
A Novel Position Sensorless Control of Flux-Switching Permanent
Magnet Linear Machine for Electromagnetic Launch
Gaojun Meng, Haitao Yu, Lei Huang, and Xu Mingfei
Southeast University, China
DS2H4 Renewable Energy Systems 2
Time:
Chairs:
Venue:
16:00-17:30, October 23, Thursday
Prof. Shoudao Huang, Hunan University, China
Prof. Jian Li, Huazhong University of Sciense&Technology, China
Room H
DS2H4-1
An Efficiency Optimization Strategy of PV/DC Modular Integrated
Structure under Power Mismatch Condition
Pengfei Li, Yuling Li, Guanjian Wang, and Dehua Zhang
Zhejiang University, China
DS2H4-2
Short-Circuit Characteristics and Impact of PV Inverter on the
protection of Distribution Grid
Mingming Shi, Xiaodong Yuan, Yubo Yuan, Bing Chen, and Zhenhua
Lv
Jiangsu Electric Power Research Institute, China
DS2H4-3
An Improved Particle Swarm Optimization MPPT algorithm Based on
Voltage Window Restrictions
Qing Zhu, Xing Zhang, Chun Liu, Shan Shou Li, and Xiaojing Chen
Hefei University of Technology, China
DS2H4-4
Battery Energy Storage System Smooth Photovoltaic Power
Fluctuation Control Method and Capacity Demand Analysis
Wentao Jin, Zhijia Xie, and Bei Li
China Electric Power Research Institute, China
DS2H4-5
Leakage Current Reduction for Transformerless Three-Level T-Type
Photovoltaic Grid-Connected Inverter
Zhangping Shao1, Xing Zhang1, Fusheng Wang1, Renxian Cao2, and
Hua Ni2
1
Hefei University of Technology, China, 2Hefei Sungrow Power Supply
Co., Ltd., China
DS2H4-6
Analysis on Circulating Current in Parallel Connected PV-inverters
Liang Zhou, Zhenxing Wu, and Guangsen Wang
Naval University of Engineering, China
DS2H4-7
Design and Implementation of Three-phase Two-bridge Advanced
Neutral Point Clamped Three-level Photovoltaic Inverter
Liqiang Yuan, Yang Cao, Fanbo He, Junchao Ma, Zhiping Chen, Ting
Lu, and Zhengming Zhao
Tsinghua University, China
DS2H4-8
Evaluation of Low-Voltage Ride-Through Capability of a Two-Stage
Grid-Connected Three-Level Photovoltaic Inverter
Yuewu Wang, Ping Yang, Xu Yin, and Yiwei Ma
South China University of Technology, China
DS2H4-9
Multi-level PV Inverter with Photovoltaic Groups Independent MPPT
Control
Luyao Xie, Jun Qi, Guoqing Weng, and Youbing Zhang
Zhejiang University of Technology, China
DS2H4-10
Novel Output Filter of Flyback Inverter for Photovoltaic AC-module
Ju-Kyoung Eom, Yong-Su Noh, Bong-Yeon Choi, Soon-Ryung Lee,
and Chung-Yuen Won
Sungkyunkwan University, Korea
DS2H4-11
Empirical Study of System-level PV power plant power factor
adjustment relying on PV inverter
Zhenhua Lv, Mingming Shi, and Xiaodong Yuan
Jiangsu Electric Power Company Research Institute, China
DS2H4-12
A Multi-mode Photovoltaic Power Generation System Based on DC
Bus
Guanjian Wang, Pengfei Li, Yuling Li, and Xiaokun Wang
Zhejiang University, China
DS2H4-13
Economic Dispatch Algorithm Considering Battery Degradation
Characteristic of Energy Storage System with PV System
Ju-Kyoung Eom, Soon-Ryung Lee, Eun-Jung Ha, Bong-Yeon Choi,
and Chung-Yuen Won
Sungkyunkwan University, Korea
DS2H4-14
Adaptive Parameter Identification Method and State of Charge
Estimation of Lithium Ion Battery
Dong Sun, and Xikun Chen
Shanghai University, China
DS2H4-15
SOH estimation of lead acid battery by artificial deterioration
Tseng I-Kun, Mamiko Inamori, and Masayuki Morimoto
Tokai University, Japan
DS2H4-16
A New SOC Estimation Algorithm without Integrated Error using
DCIR Repetitive Calculation
Yong-Ki Cho, Yong-Min Jeong, Jung-Hoon Ahn, Seung-Hee Ryu, and
Byoung-Kuk Lee
Sungkyunkwan University, Korea
DS2H4-17
Review of equalizing methods for battery pack
Hui Xiong1, Yatao Fu1, and Yiying Wei2
1
Tianjin Polytechnic University, China, 2University of Technology
Sydney, Australia
DS2H5 Power Converters 1
Time:
Chairs:
Venue:
16:00-17:30, October 23, Thursday
Prof. Surong Huang, Shanghai University, China
Prof. Wei Xu, Huazhong University of Science and Technology, China
Room H
DS2H5-1
Calculation of the Performance of the Dual Three-Phase Permanent
Magnet Brushless Machine System Using Matrix Tensor Approach
Zhanqiang Luo1, 2, Deliang Liang1, Xing Liu1, and Xintuan Yang2
1
Xi’an Jiaotong University, China, 2Aviation Industry Corporation Of
China Qing’an Group Co., China
DS2H5-2
System Construction Method of Parallel Operation System
Constructed with Three Electric Power Converters
Keisuke Ishikura1, Hiromi Inaba1, Keiji Kishine1, Mitsuki Nakai2, and
Takuma Ito1
1
The University of Shiga Prefecture, Japan, 2Ishida Co., Ltd., Japan
DS2H5-3
Examination of Cross Current Suppression Method Using Control of
Parallel Operation System Constructed by Two Electric Power
Converters
Mitsuki Nakai1, Hiromi Inaba2, Keiji Kishine2, Keisuke Ishikura2, and
Takuma Ito2
1
Ishida Co., Ltd., Japan, 2University of Shiga Prefecture, Japan
DS2H5-4
Research a control strategy for wind power PMSG with full power
converter
Qu Keqing, Liang Xiaoxia, Chen Xuhui, Ye Tiankai, and Zhao Jinbin
Shanghai University of Electric Power, China
DS2H5-5
A SVPWM Based on Fluctuate Capacitor Voltage in 3L-NPC
Back-to-Back Converter Applied to Wind Energy
Quan Chen1, 2, Qunjing Wang1, Zhe Chen2, Guoli Li1, and Cungang
Hu1
1
Anhui University, China, 2Aalborg University, Denmark
DS2H5-6
A Modulation Method Based on Finite State Machine of Five-leg
Inverter for dual motor drives
Yang Mei, Zichen Yi, and Lipeng Wang
North China University of Technology, China
DS2H5-7
A Specific Analysis Model of Three-level NPC Inverter fed Adjustable
Speed Drive System with High Accuracy
Zhen Huang1, Kai Sun1, and Yang Mei2
1
Tsinghua University, China, 2North China University of Technology,
China
DS2H5-8
Research on the Stability of a Wide Input AC-DC Converter Used in
High-speed Low-voltage Generator
Liuchen Tai1, Mingyao Lin1, Xinghe Fu1, and Wei Zhang1, 2
1
Southeast University, China, 2Nantong University, China
DS2H5-9
Unit Power Factor Control of PMSM Fed by Indirect Matrix
Converter
Jiaxing Lei, Bo Zhou, Jinliang Bian, and Xianhui Qin
Nanjing University of Aeronautics and Astronautics, China
DS2H5-10
Model-Based Design for the Control Module of Converter for Wind
Turbine Generator
Yunkai Cheng1, 2, and Hui Guo2
1
University of Chinese Academy of Sciences, China, 2Chinese
Academy of Sciences, China
DS2H5-11
The Coordinated Neutral Point Voltage Balance Control for
Back-to-Back NPC Converters used in the Wind Power System
Longcheng Tan, Yang Liu, Zhaoyang Su, Ping Wang, and Yaohua Li
Chinese Academy of Sciences, China
DS2H5-12
A Current Control Strategy of Three-phase Grid-connected Inverter
with LCL Filter Based on One-cycle Control
Xiao-dong Liu1, Jing Wu1, Su-cheng Liu1, Wei Fang1, and Yan-fei
Liu1, 2
1
Anhui University of Technology, China, 2Queen’s University, Canada
DS2H5-13
An Active Damping Method based on PR Control for
LCL-Filter-based Grid-Connected Inverters
Yong Shi, and Jianhui Su
Hefei University of Technology, China
DS2H5-14
Analysis in DSC-PLL Grid Synchronization Method under Grid
Frequency Variation
Jaedo Lee1, and Hanju Cha2
1
Korea Institute of Nuclear Safety, Korea, 2Chungnam National
University, Korea
DS2H5-15
A Single-Phase SPLL that Combined the Advantages of the PLL and
the FFT Algorithm
WenFan Li, Jian Wang, and RuiXiang Hao
Beijing Jiaotong University, China
DS2H5-16
Nonlinear Modeling and Test of Inverter Based on FPGA
Surong Huang, Qingdong Zhou, and Jin Gao
Shanghai University, China
DS2H6 Reliability & Diagnostics
Time:
Chairs:
Venue:
16:00-17:30, October 23, Thursday
Prof. Heng Nian, Zhejiang University, China
Prof. S. Ruangsinchaiwanich, Naresuan University, Thailand
Room H
DS2H6-1
Design and Optimization of High Frequency Current Transformer
Yanshen Ye, Deliang Liang, Jinhua Du, Ming Tang, and Xiang Liu
Xi’an Jiaotong University, China
DS2H6-2
Design and Analysis of a Five-Phase Double-Stator Permanent
Magnet Synchronous Motor
Jing Zhao, Jingqi Li, and Zhen Chen
Beijing Institute of Technology, China
DS2H6-3
Analyze and Improve Lifetime in 3L-NPC Inverter from Power Cycle
and Thermal Balance
Quan Chen1, 2, Zhe Chen2, Qunjing Wang1, Guoli Li1, and Long
Cheng1
1
Anhui University, China, 2Aalborg University, Denmark
DS2H6-4
Stator Inter-Turn Fault Detection for the Converter-Fed Induction
Motor Based on the Adjacent-Current Phase-Shift
He Liu1, Jin Huang1, Ming Cheng2, Zhaowen Hou1, and Lihang Zhao1
1
Zhejiang University, China, 2Southeast University, China
DS2H6-5
Rotor Faults Diagnosis in Rotor Field Oriented Controlled Induction
Motors Based on Torque Current
Zhaowen Hou1, Jin Huang1, Ming Cheng2, He Liu1, and Lihang Zhao1
1
Zhejiang University, China, 2Southeast University, China
DS2H6-6
Preventive Maintenance Schedule of CNC Machine Tool Based on
Monte Carlo Simulation
Liqing Qiu
Nanning College for Vocational Technology, China
DS2H6-7
A New SOH Prediction Model for Lithium-ion Battery for Electric
Vehicles
Huachun Han1, 2, Haiping Xu1, Zengquan Yuan1, and Yanling Shen1, 2
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Science, China
DS2H6-8
Experimental Study on SF6 Decomposition Characteristics under
Spark Discharges
Tao Lin1, 2, Dong Han1, and Guoqiang Zhang1
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Science, China
DS2H6-9
Open-Circuit Fault Diagnosis of Single Converter Device for
Directly-driven Wind Power System
Keyuan Huang, Weixing Yang, Li Wang, Shoudao Huang
Hunan University, China
DS2H6-10
Compensation Strategy of Short-Circuit Fault for a Single-Winding
Bearingless Switched Reluctance Motor
Han Yang, Zhiquan Deng, Xin Cao, and Lei Zhang
Nanjing University of Aeronautics and Astronautics, China
DS2H6-11
Six Sigma Management for Fault-tolerant Operation of the PMSM
Drive
Shurong Wei1, 2, Surong Huang1, and Jin Gao1
1
Shanghai University, China, 2Shanghai University of Electric Power,
China
DS2H6-12
On-site Partial Discharge Test of Medium Voltage Switchgear by Time
of Arrival Method
Ruibin Luo1, Ming Tang2, and Deliang Liang2
1
Guangdong Power Grid Corporation, China, 2Xi’an Jiaotong
University, China
DS2H6-13
Fault-Tolerant Repetitive Control of Three-Phase CVCF PWM
Inverters
Yunhu Yang
Anhui University of Technology, China
DS2H6-14
Evaluating the Stator Winding Inter-tern Short Circuit Fault of
Permanent Magnet Motor Using FEA Combined with Experiment
Zheng Qi, and Yongchun Liang
Hebei University of Science and Technology, China
DS2H6-15
5-phase flux switching machine insulation failure detection using
vibration monitoring
Javier Ojeda, Julien Boisson, and Mohamed Gabsi
Ecole Normale Supérieure de Cachan, France
DS2H6-16
Reliability of Parallel Connected Power Transformers with Failure
Correlation and its Preventive Maintenance
Bo Yang
Guangxi Electrical Polytechnic Institute, China
DS2H6-17
The Designing and Implementation of E2 Industrial Inverters Working
Reliability Testing System
Yongkui Man, Chunyuan Bian, Tianhui Sun, and XiumingZhang
Northeastern University, China
DS2H6-18
Analysis of Power System Operation Reliability Incorporating Human
Errors
Yingkai Bao1, Jia Guo1, Junxi Tang1, Zhao Li2, Suhong Pang2, and
Chuangxin Guo1
1
Zhejiang University, China, 2State Grid Henan Electric Power
Company, China
Session DS3H
Oct. 24, 2014 (Fri.), 8:30-10:00 -
DS3H1 PM Motor Drives 3
Time:
Chairs:
Venue:
8:30-10:00, October 24, Friday
Prof. Masayuki Morimoto, Tokai University, Japan
Dr. Bo Zhao, Harbin Institute of Technology, China
Room H
DS3H1-1
A Maximum Current Sharing Method for Dual-Redundancy Brushless
DC Motor Control
Hao Yan, Yongxiang Xu, Jibin Zou, Baochao Wang, and Shanlin Jiang
Harbin Institute of Technology, China
DS3H1-2
A Novel Twelve-Step Sensor-Less Control for Torque Ripple
Reduction in Brushless DC Motor
Sugn-An Kim1, Sang-Geon Lee1, Geo-Seung Choi2, and Yun-Hyun
Cho1
1
Dong-A University, Korea, 2Automotive Product Group Sam-Hyun,
Korea
DS3H1-3
Influence of Sleeve on Rotor Eddy Current Loss in 10kW Permanent
Magnet BLDC Motors
Lei Yan1, Ling Luo1, Bing Luo1, and Xianyu Wu2
1
Northwestern Polytechnical University, China, 2National University
of Defence Technology, China
DS3H1-4
Inter-Turn Fault Tolerant Control System in Brushless DC Motor by
Using Yoke Winding
Seung-Tae Lee, Jun-Kyu Park, and Jin Hur
University of Ulsan, Korea
DS3H1-5
Investigation of Disc-Type Brushless Motor with PM Bearing for
LVADs
Jingjing Su, Jipeng Li, Yang Jiang, Wei Wang, Hang Gao, Zhifu Han,
and Lei Zhang
Beijing Research Institute of Precise Mechatronics and Controls,
China
DS3H1-6
Current Limit Strategy for BLDC Motor Drive with Minimized
DC-Link Capacitor
Yanyu Wei, Yongxiang Xu, Jibin Zou, and Yong Li
Harbin Institute of Technology, China
DS3H1-7
The Chaos Research on Anti-Control of BLDCM of Electrical Vehicle
Based on Adaptive Method
Lidong Liu
Guidaojiaotong Polytechnic Institute, China
DS3H1-8
Vector Control Study of Axial Field Flux-Switching Permanent
Magnet Machine
Jilong Zhao1, Mingyao Lin1, Long Jin1, and Wei Zhang1, 2
1
Southeast University, China, 2Nantong University, China
DS3H1-9
Influence of Rotor Design Parameters on Static Characteristics of a
Novel Hybrid Axial Field Flux-Switching Permanent Magnet Machine
Da Xu1, Mingyao Lin1, Xinghe Fu1, Li Hao1, and Wei Zhang1, 2
1
Southeast University, China, 2Nantong University, China
DS3H1-10
Comparison of Electromagnetic Performance on E-Core Axial Field
Flux-Switching Permanent Magnet Machines
Wei Zhang1, 2, Mingyao Lin1, Da Xu1, and Jilong Zhao1
1
Southeast University, China, 2Nantong University, China
DS3H1-11
A Parametric Magnetic Network Model for Axial Flux Permanent
Magnet Machine with Coreless Stator
Youlong Wang, Wen Xuhui, Chen Chen, and Zhang Dong
Chinese Academy of Sciences, China
DS3H1-12
Design of Variable Air-Gap Axial Flux Permanent Magnet
Synchronous Machine for Extending the Speed Region
Qiping Shen, and Qiwei Xu
Chongqing University, China
DS3H1-13
Analysis of Losses of Permanent Magnet Synchronous Motor with
PWM Supply
Ping Chen, Renyuan Tang, Wenming Tong, Xueyan Han, Jianguo Jia,
and Xiaofeng Zhu
Shenyang University of Technology, China
DS3H1-14
Electromagnetic Characteristics Analysis of Surface-Mounted and
Interior Hybrid PMSM Based on Equivalent Magnetic Circuit Method
Jikai Si1, Song He1, Wenping Cao2, Xiaozhuo Xu1, and Gaoming
Feng1
1
Henan Polytechnic University, China, 2Queen's University Belfast,
UK
DS3H1-15
An Approach to Research the Effect of Time Harmonic on Permanent
Magnet Synchronous Motor
Guoxin Zhao1, Xinzheng Wang1, Zhifeng Zhang1, and Chengji Cui2
1
Shenyang University of Technology, China, 2Hangzhou GenwellPower Co.,Ltd. Shenyang Branch, China
DS3H1-16
Magnetic and Vibration Element Analysis of PM Motor under
Frequencies Including Magnetostriction
Lihua Zhu1, Qingxin Yang1, Rongge Yan2, and Zhang Xian1
1
Tianjin Polytechnic University, China, 2Hebei University of
Technology, China
DS3H1-17
A Sensorless Vector Control System of Permanent Magnet
Synchronous Motor Based on Line Active-Disturbance Rejection
Controller
Jinliang Zhang, and Longyun Kang
South China University of Technology, China
DS3H1-18
Research on Loss of Axial Field Flux-Switching Permanent Magnet
Machine
Yue Ma, Wei Zhang, Yi Yang, and Huihui Bao
Nantong University, China
DS3H1-19
Research on stable regions of double-closed loop system for PMSM
with first order low-pass filters
Lu Sun, Xiaolin Wang, Zhiquan Deng, and Qiang Ding
Nanjing University of Aeronautics and Astronautics, China
DS3H2 Special Machines and Actuators 1
Time:
Chairs:
Venue:
8:30-10:00, October 24, Friday
Prof. Heyun Lin, Southeast University, China
Prof. Guohai Liu, Jiangsu University, China
Room H
DS3H2-1
Analysis on Coupling Effect of 2-DOF Direct Drive Induction Motor
Based on 3-D Model
Jikai Si1, Liwang Ai1, Haichao Feng1, Yifeng Zhu1, and Yihua Hu2
1
Henan Polytechnic University, China, 2University of Strathclyde, UK
DS3H2-2
Novel Bistable PM Electromagnetic Clutch Unit for Wheel EV Drive
Wanli Cai, Chenglin Gu, and Chenhui Wang
Huazhong University of Science and Technology, China
DS3H2-3
Investigation of a Five-Phase 20-Slot/18-Pole PMSM for Electric
Vehicles
Ping Zheng, Yi Sui, Zhenxing Fu, Peilun Tang, Fan Wu, and Pengfei
Wang
Harbin Institute of Technology, China
DS3H2-4
Magnetic System Study of a Halbach Compound-Structure PMSM
Used for Hybrid Electric Vehicles
Yi Sui, Yong Liu, Chengde Tong, Bin Yu, and Luming Cheng
Harbin Institute of Technology, China
DS3H2-5
Torque Density Improvement of Transverse-Flux Dual Rotor Machine
for Power-Split Hybrid Electric Vehicle Application
Ping Zheng, Quanbin Zhao, Jingang Bai, Bin Yu, Zhiyi Song, and Jing
Shang
Harbin Institute of Technology, China
DS3H2-6
Design and Implementation of an Electromagnetic Clutch System for
Hub Motors
Weiguang Yu, and Chenglin Gu
Huazhong University of Science and Technology, China
DS3H2-7
Research of a Four-Phase Fault-Tolerant PMSM Used for EVs
Haisong Zhou1, Bin Yu2, Luming Cheng2, Haipeng Wang2, Xiaopeng
Li1, and Ping Zheng2
1
Tianjin University of Technology and Education, China, 2Harbin
Institute of Technology, China
DS3H2-8
Novel Switched-Flux Hybrid Permanent Magnet Memory Machines
for EV/HEV Applications
Hui Yang1, Heyun Lin1, Z. Q. Zhu2, Dong Wang1, Shuhua Fang1, and
Yunkai Huang1
1
Southeast University, China, 2University of Sheffield, UK
DS3H2-9
A Novel Wound Rotor BDFIG for Ship Shaft Generator
Application—Control and Prototype Tests
Xin Chen, and Xuefan Wang
Huazhong University of Science and Technology, China
DS3H2-10
Dimension Effect on a Grid-Connected Brushless Doubly-fed
Reluctance Generator
I-Hsien Lin1, Min-Fu Hsieh1, David G. Dorrell2, and Mi-Ching Tsai1
1
National Cheng Kung University, Taiwan, 2University of Technology,
Sydney, Australia
DS3H2-11
Design and Electromagnetic-Thermal Analysis of a 64kW
Doubly-sine Wound-Rotor Brushless Doubly-Fed Generator
Chaohao Kan, Bo Ma, Guoliang Chu, and Jiawu Zhang
Hefei University of Technology, China
DS3H2-12
Control Strategy for a Four-Phase Fault-Tolerant Permanent-Magnet
Synchronous Machine
Haisong Zhou1, Bin Yu2, Zhanxi Lin2, Haipeng Wang2, Xiaopeng Li1,
and Ping Zheng2
1
Tianjin University of Technology and Education, China, 2Harbin
Institute of Technology, China
DS3H2-13
Research of Torque Balance Control of Dual-Rotor Motor based on
MATLAB
Yuanfeng Huang, Haifeng Wang, and Wang Li
Chinese Academy of Sciences, China
DS3H2-14
Scheme Optimization of an Axial Magnetic-Field-Modulated
Brushless Double-Rotor Machine
Chengde Tong, Zhiyi Song, Ping Zheng, Jingang Bai, and Quanbin
Zhao
Harbin Institute of Technology, China
DS3H2-15
Fault tolerant control of dual-rotor PMSM under open-circuit fault
conditions
Yumeng Li, Jing Zhao, Zhen Chen, Xiangdong Liu, and Hao Chen
Beijing Institute of Technology, China
DS3H2-16
Design a Wound Rotor Brushless Doubly-Fed Generator Based on
Tooth Harmonic Principles and Finite Element Analysis
Lei Jia, and Xuefan Wang
Huazhong University of Science and Technology, China
DS3H2-17
Research of Hysteresis Loss in Large Dry Submersible Motor with the
Fault of Static Eccentricity
Na Liang, Xiaowei Cheng, Yong Fang, Fuying Li, Qiang Lv, and
Xiaohua Bao
Hefei University of Technology, China
DS3H2-18
Modified Inverse Decoupling Control for Bearingless Switched
Reluctance Motors Operating in Irreversible Domain
Zhiying Zhu, and Yukun Sun
Nanjing Insitute of Technology, China
DS3H3 Linear Machines and Magnetic Levitation 1
Time:
Chairs:
Venue:
8:30-10:00, October 24, Friday
Dr. François Baudar, Université catholique de Louvain (UCL), Belgium
Prof. Haitao Yu, Southeast University, China
Room H
DS3H3-1
Numerical Calculation and Analysis of 3D Transient Temperature
Field for Transverse Flux Tubular Linear Machine
Mei Zhao1, 2, Shangqin Song1, Fujun Han1, Huixia Liu1, Hongyong
Yang1, and Ji-bin Zou2
1
Ludong University, China, 2Harbin Institute of Technology, China
DS3H3-2
Analytical Prediction and Verifications for Inductance Profile of
Tubular Transverse Flux Machines with Generic Steel Lamination
Qian Wang1, Bo Zhao1, Jianhui Hu1, Yong Li1, Jibin Zou1, Tongmao
Niu2, and Hui Zhao1
1
Harbin Institute of Technology, China, 2Daqing Oilfield Powerlift
Pump Co. Ltd., China
DS3H3-3
Analysis and Optimization of the Inner Armature Tubular
Flux-Switching Permanent Magnet Linear Motor
Qiang Tan, Xuzhen Huang, Bo Zhou, and Qinglong Wang
Nanjing University of Aeronautics and Astronautics, China
DS3H3-4
Calculation and Analysis of the Loss for Tubular Flux-switching
Permanent Magnet Linear Motor (TFSPMLM)
Xuzhen Huang1, Qiang Tan1, and XiaoJing Xue2
1
Nanjing University of Aeronautics and Astronautics, China, 2North
Automatic Control Technique Research Institute, China
DS3H3-5
Reduction of Detent Force in Permanent Magnet Linear Synchronous
Motor with Double Secondary Side
Jiwen Zhao, Kai Liu, Panpan Chen, and Jian Huang
Anhui University, China
DS3H3-6
Design Optimization of Permanent Magnet Synchronous Linear Motor
by Multi-SVM
Jiwen Zhao, Jian Huang, Ya-hua Wang, and Kai Liu
Anhui University, China
DS3H3-7
Topology Analysis and Performance Evaluation of a High Thrust
Force Density Linear Switched Reluctance Machine for Low Cost
Conveyor Applications
Daohan Wang, Xiuhe Wang, and Chenghui Zhang
Shandong University, China
DS3H3-8
Linear Synchronous Motor Drive System Based on Proportion
Resonant Current Controller in Maglev Transportation
Dongdong Cui1, 2, Rong Wei1, Jinxin Liu1, and Qiongxuan Ge1
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
DS3H3-9
Control Strategy for Nine Phase Maglev Permanent Magnet
Synchronous Planar Motors Driven by Composite Current
Baoquan Kou, Feng Xing, Chaoning Zhang, Lu Zhang, and Tiecheng
Wang
Harbin Institute of Technology, China
DS3H3-10
Dynamic Analysis of the Single-Sided Linear Induction Motor with
Discontinuous Secondary
Hao Ding1, and Liang Guo2
1
Zhejiang Institute of Quality Inspection Science, China, 2Zhejiang
Sci-Tech University, China
DS3H3-11
Analysis and Design of a Magnetically Levitated Planar Motor with
Multi-layer Overlapping Windings
Liang Guo1, and Hao Ding2
1
Zhejiang Sci-Tech University, China, 2Zhejiang Institute of Quality
Inspection Science, China
DS3H3-12
Performance Comparison of Control Methods for High Speed Long
Primary Double-sided Linear Induction Motor
Qin Liu1, 2, Ruihua Zhang1, Yumei Du1, Liming Shi1, and Yaohua Li1
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
DS3H3-13
Fault-Tolerant Primary-Permanent Magnet Linear Machine
Employing Modular Secondary
Wenxiang Zhao, Zhuoya Fang, Jinghua Ji, Huawei Zhou, Yi Du, and
Guohai Liu
Jiangsu University, China
DS3H3-14
Levitation Force Control of Maglev Permanent Synchronous Planar
Motor Based on Multivariable Feedback Linearization Method
Feng Xing, Baoquan Kou, Chaoning Zhang, Yiheng Zhou, and Lu
Zhang
Harbin Institute of Technology, China
DS3H3-15
Slot-Pole Combinations Research of Permanent-Magnet Linear
Synchronous Motor with concentrated windings
Xu Zhang, Xudong Wang, Xiaozhuo Xu, and Haichao Feng
Henan Polytechnic University, China
DS3H3-16
Current Control for the Single Degree of Freedom Linear Maglev
System
Liyi Li, Mingyi Wang, Jiwei Cao, and Jiaxi Liu
Harbin Institute of Technology, China
DS3H4 Renewable Energy Systems 3
Time:
Chairs:
Venue:
8:30-10:00, October 24, Friday
Dr. Jinhua Du, Xi’an Jiaotong University, China
Prof. Kan Akatsu, Shibaura Institute of Technology, Japan
Room H
DS3H4-1
Research on Small-Signal Stability of Power System Connected with
Different Wind Turbines Based on PSAT
Bangqiang Liu1, 2, Hui Guo1, and Guobiao Gu1
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
DS3H4-2
Power Fluctuation Alleviation Using Cascade STATCOMs with
Energy Storages for Wind Farm Applications
Ning-ning Li, Yi-qi Liu, Yan-chao Ji, Jian-ze Wang, and Ke Shen
Harbin Institute of Technology, China
DS3H4-3
Electromagnetic Transient Response Analysis of DFIG under
Cascading Grid Faults Considering Phase Angel Jumps
Yun Wang1, and Qiuwei Wu2
1
Shenzhen University, China, 2Technical University of Denmark,
Denmark
DS3H4-4
Basic Investigations on a Wind Power Plant Consisting of
Series-Connected Wind Turbine Generators
Fujio Tatsuta, and Shoji Nishikata
Tokyo Denki University, Japan
DS3H4-5
Experimental Investigations of a Hybrid Wind Power Plant Consisting
of Series-Connected Wind Turbine Generators When Interconnected
to the Grid
N. Watanabe, F. Tatsuta, and S. Nishikata
Tokyo Denki University, Japan
DS3H4-6
Studies on a Hybrid Wind Turbine Generator System Considering
Surplus Power
Takahiro Miyamoto, Ken-ichiro Yamashita, Katsumi Suzuki, Fujio
Tatsuta, and Shoji Nishikata
Tokyo Denki University, Japan
DS3H4-7
Research on Grid-connected and Economy of Distributed Wind Power
Generation
Xinyuan Liu1, Pai Liu2, Hui Xu3, Huiping Zheng1, Shuyong Song1,
Yezhou Hu4, and Yong Yang5
1
State Grid Shanxi Electric Power Research Institute, China, 2State
Grid Shanghai Qingpu Electrical Power Supply Company, China,
3
Qingpu Branch of Shanghai Shinan Electrical Power Group Co.,
Ltd., China, 4State Grid Zhejiang Electric Power Research Institute,
China, 5ZheJiang Energy City Gas Co., Ltd., China
DS3H4-8
Maximum Power Point Tracking Control of Brushless Doubly-fed
Wind Power Generator with Open Winding Fed by Dual Two-level
Inverters
Liancheng Zhu1, 2, Fengge Zhang1, Shi Jin1, and Dairui Wang1
1
Shenyang University of Technology, China, 2University of Science
and Technology Liaoning, China
DS3H4-9
Coordinated Control of VSC-based DC network for Wind Farm
Integration
Jinli Lyu, Yi Wang, Shang Ma, and Lirong Zhang
North China Electric Power University, China
DS3H4-10
Reactive Power Dispatch for Loss Minimization of a Doubly Fed
Induction Generator Based Wind Farm
Baohua Zhang, Weihao Hu, Peng Hou, and Zhe Chen
Aalborg University, Denmark
DS3H4-11
Frequency Response Control of D-PMSG Based on the Active
Disturbance Rejection Controller
Qiaoming Shi1, Gang Wang2, Yuhang Chen2, Lijun Fu2, Wentao
Jiang2, and He Huang2
1
Xi'an Jiaotong University, China, 2National Key Laboratory for
Vessel Integrated Power System Technology, China
DS3H4-12
Harmonic Reduction through Resistive and Inductive Harmonic
Impedance
Fei Li, Xing Zhang, Hong Zhu, Haoyuan Li, Baoji Wang, and
Changzhou Yu
Hefei University of Technology, China
DS3H4-13
Decoupled Direct Power Control Based on Improved Sector Selection
Algorithm for Three-level Grid-connected Inverter
Ting Lu1, Zhengming Zhao1, Yingchao Zhang2, Liqiang Yuan1, and
Fanbo He1
1
Tsinghua University, China, 2Chongqing Communication Institute,
China
DS3H4-14
Torque Ripple Suppression of DFIG under Unbalanced Grid Voltage
Conditions using Reduced-order Generalized Integrators
Jianliang Wang1, 2, Yihuang Zhang1, Peng Cheng3, and Heng Nian3
1
Beijing Jiaotong University, China, 2CSR Zhuzhou Electric Motor
Co., Ltd., China, 3Zhejiang University, China
DS3H4-15
An Improved LVRT Control Method of MW Level DFIG-Based
WECS
Zhaoyang Su1, 2, Ping Wang2, Lon gcheng Tan2,and Pengxian Song1, 2
1
University of Chinese Academy of Sciences, China, 2Chinese
Academy of Sciences, China
DS3H4-16
Investigation of Harmonic Current of Power System Using Static Var
Compensator for Grid-connected Induction Generators Under
Condition of Low Wind Speed
B. Sawetsakulanond1, and V. Kinnares2
1
Mahanakorn University of Technology Nongjok, Thailand,
2
King Mongkut’s Institute of Technology Ladkrabang, Thailand
DS3H5 Power Converters 2
Time:
Chairs:
Venue:
DS3H5-1
8:30-10:00, October 24, Friday
Prof. Yongdong Li, Tsinghua University, China
Prof. Cheng-Tsung Liu, National Sun Yat-Sen University, Taiwan
Room H
Performance Analysis and Comparison for the Five-phase Inverter
SVPWMs
Fei Yu, Dong Xiang, and Huiying He
Naval University of Engineering, China
DS3H5-2
The Subsection Synchronous Modulation Strategy for High power
NPC/H-bridge Inverter
Pei Yang1, Chongjian Li1, and Zhiming Lan1, 2
1
Automation Research and Design Institute of Metallurgical Industry,
China, 2State Key Laboratory of Hybrid Process Industry Automation
System and Equipment Technology, China
DS3H5-3
Experimental Verification of Dead-time Compensation Scheme for
Pulse Width Modulation Scheme on Six-Switch Two Three-Phase
Output Inverter
Sho Ikegami1, Nobukazu Hoshi1, and Junnosuke Haruna2
1
Tokyo University of Science, Japan, 2Utsunomiya University, Japan
DS3H5-4
Current Harmonic Minimum Pulse-width Modulation for ANPC-5L
Inverter
Wenxiang Song, Jiuyi Feng, Shuhao Jiang, and Haoyu Wang
Shanghai University, China
DS3H5-5
Investigation on a Novel Discontinuous Pulse-Width Modulation
Algorithm for Single-phase Voltage Source Rectifier
Hao Qu1, Xijun Yang1, You gui Guo2, and Frede Blaabjerg3
1
Shanghai Jiaotong University, China, 2Xiangtan University, China,
3
Aalborg University, Denmark
DS3H5-6
An Improved Capacitor Voltage Balance Control for Cascaded
H-bridge Rectifier
Xiang Hong1, 2, Ruihua Zhang1, and Lin Wu3
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China, 3State Grid Electric Power Research
Institute, China
DS3H5-7
Virtual Flux Based Direct Power Control for Three-Level PWM
Rectifier
Yingchao Zhang1, Liping Jin1, Yongchang Zhang2, Ting Lu3, and
Zhengming Zhao3
1
Chongqing Communication Institute, China, 2North China University
of Technology, China, 3Tsinghua University, China
DS3H5-8
Research on the Control Technique of High Power Three-Level PWM
Rectifier with IGCTs
Jun Jiang1, Chongjian Li1, Chengsheng Wang1, 2, Wei Duan3, and Pei
Yang1
1
Automation Research and Design Institute of Metallurgical Industry,
China, 2Hybrid Process Industry Automation System and Equipment
Technology State Key Lab, China, 3Beijing Aritime Intelligent Control
Co., LTD., China
DS3H5-9
A Novel Dead Time Compensation Method of Single-phase PWM
Rectifier
Lu Zhao, Qiongxuan Ge, Jinqi Ren, and Yaohua Li
Chinese Academy of Sciences, China
DS3H5-10
A Simplified 3D-SVPWM Algorithm for Three-phase Four-wire Shunt
Active Power Filter
Xiang Liu, YunXiang Xie, and Yu Wang
South China University of Technology, China
DS3H5-11
Voltage Balancing Strategy Based on Reference Vector Angle
Prediction for Three-Level Shunt APF
Jie Zhu, and Jiaqiang Yang
Zhejiang University, China
DS3H5-12
An Enhanced Method Based on Wavelet for Power Quality
Compression
Jie Gao, Changbao Zheng, Cungang Hu, and Xinchen Ma
Anhui University, China
DS3H5-13
A Study on Realization of Hysteresis Current Regulator for Reducing
Switching Loss Using the slope of Reference Current
Sun-Ki Hong, Jung-Sup Lee, Nam-Hee Byeon, and Ki-Seok Kim
Hoseo University, Korea
DS3H6 Noise & Vibration, Testing
Time:
Chairs:
Venue:
DS3H6-1
8:30-10:00, October 24, Friday
Prof. Yong Li, Harbin Institute of Technology, China
Prof. Yuejin Zhang, Shanghai University, China
Room H
The Calculation of Radial Force Wave Weakened Percentage for
Doubly Salient Motor Based on Improved Magnetic Field Division
Method
Xin Zhang, Xiuhe Wang, and Yubo Yang
Shandong Univercity, China
DS3H6-2
A New Broadband Bipolar Electrical Controlled Attenuator
Jian Tang, Zhihua Zhao, Huan Xiao, Yi Li, Fangmin He, and Jin Meng
Naval University of Engineering, China
DS3H6-3
Electric Field Research of ±800kV Dry-type Smoothing Reactor
Tuteng Chen1, Jifeng Cao1, Guangyuan Zhou2, Zhipeng,Jiang2, Yu
Wang2, and Xishan Wen2
1
CSG EHV Transmission Company, China, 2Wuhan University, China
DS3H6-4
Identification of Laminated Core and Winding’s Physical Parameters
by Stator’s Modal Testings
Jingjing Sun1, Haijun Feng2, and Changsheng Zhu1
1
Zhejiang University, China, 2China Shipbuilding Industry
Corporation, China
DS3H6-5
Research on the Vibration and Noise of Less Rare-Earth Interior U
Permanent Magnet Synchronous Machine
Zhenxing Fu1, 2, Peng Zhang1, Shaorui Huang2, Quanbin Zhao1, and
Ping Zheng1
1
Harbin Institute of Technology, China, 2SAIC E-Propulsion Auto
Technology Co., Ltd., China
DS3H6-6
Interior Permanent Magnet Motor Drive System Modeling for
Electromagnetic Interference Analysis
Dong Zhang1, 2, Liang Kong2, Xuhui Wen2, and Zhuolin Duan1, 2
1
University of Chinese Academy of Sciences, China ,2Chinese
Academy of Sciences, China
DS3H6-7
An Inductance Testing Method for Multi-unit PMSM without any
Auxiliary Equipment
Jibin Zou, Depeng Zeng, Yongxiang Xu, and Bo Zhao
Harbin Insitute of Technology, China
DS3H6-8
A Torque Measuring Method Based on Encoder for Permanent Magnet
Synchronous Machine
Xing Liu, Deliang Liang, Jinhua Du, Yanan Yu, and Xinning Yang
Xi’an Jiaotong University, China
DS3H6-9
Development of High Speed Characteristic Measurement Method for
Permanent Magnet Motors
Shao-Kai Lin, Mi-Ching Tsai, and Sheng-He Wang
National Cheng Kung University, Taiwan
DS3H6-10
Indirect Testing to Determine losses of High Speed Synchronous
Permanent Magnets Motors
Ramdane Lateb, and Joaquim Da Silva
SKF magnetic mechatronics, France
DS3H6-11
Design and Packaging of 1200V/300A-IGBT Power Module for
Electric Vehicle
Libing Zheng1, 2,Yulin Zhong1, 2, Chunlei Wang1, 2, 3, Huachao Fang1, 2,
3
, Jin Zhang1, 2, and Ju Xu1, 2
1
Chinese Academy of Sciences, China, 2Beijing Engineering
Laboratory of Electrical Drive System &Power Electronic Device
Packaging Technology, China, 3University of Chinese Academy of
Sciences, China
DS3H6-12
Modeling and Design of Testing Platform for Permanent Magnet
Linear Synchronous Motor
Baoquan Kou, Lu Zhang, Yi Zhang, and Yinxi Jin
Harbin Institute of Technology, China
DS3H6-13
A New Inductance Measurement Method for Permanent Magnet
Synchronous Linear Motor
He Zhang, Baoquan Kou, Liqiang Wang, Yinxi Jin, and Hailin Zhang
Harbin Institute of Technology, China
DS3H6-14
Effects Analysis of Misalignments on Dynamic Characteristics Test
for Permanent Magnet Synchronous Motor
Xing Liu, Deliang Liang, Jinhua Du, Yanan Yu, Xinning Yang, and
Zhanqiang Luo
Xi’an Jiaotong University, China
DS3H6-15
Numerical Estimation and Optimization of Vibration Noise due to
Magnetostriction and Magnetic Forces for Laminated Core Structure
Xian Zhang, Pengcheng Zhang, Qingxin Yang, Lihua Zhu, and Xin
Zhang
Tianjin Polytechnic University, China
DS3H6-16
Electromagnetic Noise Assessment for EV’s PM Driving Machines
Xiaohua Li1, 2, Surong Huang1, Qi Zhang1, and Ying Dai1
1
Shanghai University, China, 2Shanghai University of Electric Power,
China
Session DS4H
Oct. 24, 2014 (Fri.), 10:30-12:00 -
DS4H1 PM Motor Drives 4
Time:
Chairs:
Venue:
10:30-12:00, October 24, Friday
Prof. Xi Xiao, Tsinghua University, China
Prof. Chung-Yuen Won, Sungkyunkwan University, Korea
Room H
DS4H1-1
Improvement of Pole-Splitting Permanent-Magnet Vernier Machine
with Permanent Magnets on both Stator and Rotor Side
Le Sun, and Ming Cheng
Southeast University, China
DS4H1-2
Remedial Operation of Five-Phase Tubular Fault-Tolerant Linear PM
Actuator for Active Electromagnetic Suspension
Huawei Zhou, Long Chen, Guohai Liu, Ying Xie, and Wanxiang Zhao
Jiangsu University, China
DS4H1-3
Influence of Flux Gaps on the Performance of Modular PM Linear
Synchronous Motors
Jiameng Shi, Hao Kong, Liren Huang, Qinfen Lu, and Yunyue Ye
Zhejiang University, China
DS4H1-4
Investigation of Multiphase Modular Stator SPM with Fault Tolerance
Huilin Kang, Libing Zhou, Jin Wang, and Xi Peng
Huazhong University of Science and Technology, China
DS4H1-5
Analysis of Electromagnetic Coupling in Double-Rotor Permanent
Magnet Reluctance Motor
Shaokun Liu, Jinhua Du, and Deliang Liang
Xi’an Jiaotong University, China
DS4H1-6
Rotor Design Techniques for Reducing the Cogging Torque in a Novel
Dual-Rotor Axial Field Flux-Switching Permanent Magnet Machine
Li Hao, Mingyao Lin, Da Xu, Wei Zhang, and Nian Li
Southeast University, China
DS4H1-7
Modeling of Double-Rotor Permanent Magnet Reluctance Motor
Shaokun Liu, Jinhua Du, and Deliang Liang
Xi’an Jiaotong University, China
DS4H1-8
Design and Simulation of Dual Rotor Permanent Magnet Brushless
DC Motor
Shuangyi Song1, Yanliang Xu1, Hongfang Tian2, and Xiao Gong1
1
Shandong University, China, 2Rizhao haida automation technology
co., LTD., China
DS4H1-9
Four-Dimension Current Vector Control for Dual Three-Phase PMSM
Changpan Zhou, Jianyong Su, Guijie Yang, and Nianwei Xing
Harbin Institute of Technology, China
DS4H1-10
24-Sector Space Vector Decomposition for a Dual Three-Phase
PMSM
Yanjun Yu, Lixiao Gao, Yang Liu, and Feng Chai
Harbin Institute of Technology, China
DS4H1-11
Current Control Strategy for Six-Phase PMSM Based on MPC under
Open-Circuit Fault Condition
Jianyong Su1, Jian Liu2, and Guijie Yang1
1
Harbin Institute of Technology, China, 2Heilongjiang Institute of
Industry Technology, China
DS4H1-12
Current Control Method of Six-Phase PMSM Drive System with
Parallel Back-to-Back Converters
Ming-liang Chen1, Yu-han Wu2, Lei Yuan1, Fei Xiao1, and Zhen Xie1
1
Naval University of Engineering, China, 2PLA, China
DS4H1-13
Sensorless Switching-Table-Based Direct Torque Control for Dual
3-Phase PMSM Drives
Ali H. Almarhoon, Y. Ren, and Z.Q. Zhu
University of Sheffield, UK
DS4H1-14
A Novel Space Vector Modulation Strategy for a Five-Phase
Flux-Switching Permanent Magnet Machine Drive System
Minghao Tong, Wei Hua, and Ming Cheng
Southeast University, China
DS4H1-15
Analysis and Design of a Fault-Tolerant Six-Phase Permanent-Magnet
Synchronous Machine for Electric Vehicles
Chengde Tong, Fan Wu, Ping Zheng, Yi Sui, and LumingCheng
Harbin Institute of Technology, China
DS4H1-16
On Fault Tolerance for IPM-FSCW Machines Adopting a Modular
Converter
Hui Zhang, Oskar Wallmark, and Mats Leksell
KTH Royal Institute of Technology, Sweden
DS4H1-17
Design and analytical inductance calculations of five-phase
fault-tolerant permanent-magnet Machine
Pengfei Wang, Ping Zheng, Yi Sui, Fan Wu, Luming Cheng, and
Tiecai Li
Harbin Institute of Technology, China
DS4H1-18
Design and test of torque adjustment system of five-phase
fault-tolerant permanent-magnet machine
Ping Zheng, Pengfei Wang, Zhenxing Fu, Yi Sui, Weinan Wang, and
Tiecai
Harbin Institute of Technology, China
DS4H2 Special Machines and Actuators 2
Time:
Chairs:
Venue:
10:30-12:00, October 24, Friday
Prof. Ahmed Masmoudi, University of Sfax, Tunisia
Prof. Jianzhong Zhang, Southeast University, China
Room H
DS4H2-1
Design of Novel Disc Transverse Flux Permanent Magnet Machine
Xiao Gong1, Yanliang Xu1, and Wenxin Song2
1
Shandong University, China, 2Shandong Power Equipment Co., Ltd.,
China
DS4H2-2
A New Calculation Method for Electromagnetic Torque of Stepping
Motors—Teeth Layer Calculated Torque Method
Binglin Lu1, Yanliang Xu1, Feng Xin2, and Gong Xiao1
1
Shandong University, China, 2Shandong Product Quality Inspection
Research Institute, China
DS4H2-3
Numerical Investigation of Heat Transfer for High-speed
Permanent-Magnet Machine with spiral-duct rotor
Zhenjie Ma1, Tianyu Wang1, Dapeng Wang2, Guanghui Du2, Ying
Han3, and Lin Wang1
1
Shenyang Institute of Engineering, China, 2Shenyang University of
Technology, China, 3Fuxin Del Auto Parts Company Ltd., China
DS4H2-4
Design of Fuzzy Controller with Linear Extended State Observer for
Magnetic Suspension Bearings
Kexiang Li, Zhiquan Deng, Chengzi Liu, and Jie Zhou
Nanjing University of Aeronautics and Astronautics, China
DS4H2-5
Magnetic Field Analysis and Optimal Design of a Novel Bistable
Permanent Electromagnetic Clutch
Fan Yang, Chenglin Gu, and Chenhui Wang
Huazhong University of Science and Technology, China
DS4H2-6
Conceptual Design of Self-sensing Actuator based on Giant
Magnetostrictive Material
Baiping Yan1, Chengming Zhang2, Lili Li2, Fuzai Lv1, and Shuang
Deng1
1
Zhejiang University, China, 2Harbin Institute of Technology, China
DS4H2-7
Vibration Control Strategy for Bearingless Switched Reluctance
Motors
Chengwei Liu1, Yan Yang1, and Zhiquan Deng2
1
Nanjing University of Posts and Telecommunications, China,
2
Nanjing University of Aeronautics and Astronautics ,China
DS4H2-8
Pole-Shape Optimization of Flux-Switching Permanent Magnet
Machine
Dehong Zhu, Chenpu Shen, Yi Du, and Feng Xiao
Jiangsu Universiy, China
DS4H2-9
A Design Approach Integrating the Magnetic Circuit and Electric
Circuit Models for BDFIM
Yao-Hsin Chang, Yi-Ting Li, I-Hsien Lin, and Min-Fu Hsieh
National Cheng Kung University, Taiwan
DS4H2-10
Research on the Electromagnetic Performance of Less Rare-Earth
Interior V Permanent-Magnet Synchronous Machine
Jingang Bai, Zhenxing Fu, Shaorui Huang, Zhiyi Song, Weinan Wang,
and Ping Zheng
Harbin Institute of Technology, China
DS4H2-11
Research on Variable Flux Permanent Magnet Pole-changing Machine
with Harmonic Excitation
Dong Wang, Heyun Lin, Hui Yang, Shuhua Fang, and Yunkai Huang
Southeast University, China
DS4H2-12
Design and Analysis of Modified Spoke Type BLDC Motor Using a
Ferrite Permanent-Magnet
Il-Man Seo, Hyung-Kyu Kim, and Jin Hur
University of Ulsan, Korea
DS4H2-13
Analysis and Research of a Novel Axial Field Variable Flux
Permanent Magnet Synchronous Machine with Mechanical Device
Xiping Liu, Dong Chen, Chao Zhang, Yuefei Huang, and Min Wang
Jiangxi University of Science and Technology, China
DS4H2-14
Modeling and Analysis of a Maglev Vibration Isolation Unit Using
Rectangle Halbach Permanent Magnet Array
Yiheng Zhou, Baoquan Kou, Liqiang Wang, and Feng Xing
Harbin Institute of Technology, China
DS4H2-15
Design of Building Air-Conditioner Control System Based on
PROFIBUS
Kun Xia, Linling Zhu, Sen Miao, and Xinyue Xu
University of Shanghai for Science and Technology, China
DS4H2-16
Characteristic Analysis of a Novel Series Magnetic Path Hybrid
Excitation Linear Eddy Current Brake
Baoquan Kou, Yinxi Jin, He Zhang, Lu Zhang, and Hailin Zhang
Harbin Institute of Technology, China
DS4H3 Linear Machines and Magnetic Levitation 2
Time:
Chairs:
Venue:
10:30-12:00, October 24, Friday
Dr. Jean-Claude Mipo, Valeo Powertrain Electric Systems, France
Dr. Weizhong Fei, Cranfield University, UK
Room H
DS4H3-1
Research of fuzzy two degree of freedom PID control for permanent
magnet synchronous linear motor
Jiwen Zhao, Jian Huang, Yanwu Xu, and Zhenbao Pan
Anhui University, China
DS4H3-2
Characteristics Analysis of Permanent Magnet Flux Switching Linear
Machines
Xudong Wang, Fangfang Bian, Xiaozhuo Xu, and Haichao Feng
Henan Polytechnic University, China
DS4H3-3
Thrust Characteristic Analysis and Test of the Synchronous Permanent
Magnet Linear Motor
Lu Zhang, Baoquan Kou, Yi Zhang, and Yinxi Jin
Harbin Institute of Technology, China
DS4H3-4
Design and Optimization of a Single-Phase Oscillating PM Alternator
used for Free-Piston Stirling Engines
Jingang Bai, Zhenxing Fu, Bin Yu, Yi Sui, Shaohong Zhu, and Ping
Zheng
Harbin Institute of Technology, China
DS4H3-5
Reducing Detent Force and Three-phase Magnetic Paths Unbalance of
PM Linear Synchronous Motor Using Modular Primary Iron-Core
Structure
Yinru Bai, Tianbo Yang, and Baoquan Kou
Harbin Institute of Technology, China
DS4H3-6
The Research of parallel structure and composite fuzzy control for
linear machine based on Mamdani method
Mingfei Xu, Haitao Yu, Lei Huang, and Gaojun Meng
Southeast University, China
DS4H3-7
A Linear Consequent Pole Stator Permanent Magnet Vernier Machine
Xianxing Liu, Chunhua Zou, Yi Du, and Feng Xiao
Jiangsu University, China
DS4H3-8
A C-core Linear Flux-switching Permanent Magnet Machine with
Positive Additional Teeth
Feng Xiao, Xianxing Liu, Yi Du, Kai Shi, and Peifeng Xu
Jiangsu University, China
DS4H3-9
Magnetic Field Analytical Calculation of the Permanent Magnet
Synchronous Linear Motor with Fractional Slot Concentrated
Windings
Xudong Wang, Peilong Wang, and Xiaozhuo Xu
Henan Polytechnic University, China
DS4H3-10
Magnetic Modeling of a Linear Motor Using Lumped Approach
Jinlin Gong1, Nicolas Bracikowski2, and Xiuhe Wang1
1
Shandong University, China, 2Nantes University, France
DS4H3-11
Nonlinear Calculation Methods of Long Primary Double-sided Linear
Induction Motor
Jin Xu, Xidang Yang, Weiming Ma, Yuxing Zhang, and Zhaolong Sun
Naval University of Engineering, China
DS4H3-12
Proposing of high thrust Double-Sided PM-LSM with magnetic
configuration
He Piao, Kenji Suzuki, and Hideo Dohmeki
Tokyo City University, Japan
DS4H3-13
Performance Analysis of a High Power Density Tubular Linear Switch
Reluctance Generator for Direct Drive Marine Wave Energy
Conversion
Daohan Wang, Xiuhe Wang, and Chenghui Zhang
Shandong University, China
DS4H3-14
Design and Control of Single Phase Tubular Permanent Magnet Linear
Motor
Zhou Yang2, He Cheng2, Guojun Yu2, Xiao Liu2, Hao Chen2, and
Yingjie Huo1
1
Lanzhou Institute of Space Technology and Physics, China, 2China
University of Mining and Technology, China
DS4H3-15
Analysis of a Permanent Magnet Linear Synchronous Motor with
Segmented Armature for Transportation System
Liren Huang, Yi Chen, Hao Kong, Qinfen Lu, and Yunyue Ye
Zhejiang University, China
DS4H4 Reluctance Machines
Time:
Chairs:
Venue:
10:30-12:00, October 24, Friday
Prof. Qiaongxuan Ge, Institute of Eletrical Engineering Chinese
Academy of Sciences, China
Dr. Kaiyuan Lu, Aalborg University, Denmark
Room H
DS4H4-1
Characteristics Comparison of Conventional and Modular E-core
Stator with Segmental Rotor Switched Reluctance Motors
Wen Ding, Yanfang Hu, and Luming Wu
Xi’an Jiaotong University, China
DS4H4-2
Fault-Tolerant Performance of a Mutually Coupled Dual-Channel
Switched Reluctance Generator under Open-circuit Faults
Wen Ding, Yanfang Hu, Luming Wu, and Yunpeng Liu
Xi’an Jiaotong University, China
DS4H4-3
Comparative Evaluation of Voltage Space Vector Control and Direct
Instantaneous Torque Control for Switched Reluctance Motor Drives
Wen Ding, Yanfang Hu, and Luming Wu
Xi'an Jiaotong University, China
DS4H4-4
Research on a Switched Reluctance Motor with Auxiliary Rotor Teeth
He Zhang, Baoquan Kou, Yaru Qu, Yinxi Jin, and Hailin Zhang
Harbin Institute of Technology, China
DS4H4-5
Switched Reluctance Motor for Electric Drive of Overland Belt
Conveyor
G.K. Ptakh1, 2, N.F. Evsin2, D.A. Zvezdunov2, D.V. Rozhkov2, and
A.E. Yakovenko1, 2
1
Platov South-Russian State Polytechnic University, Russia, 2"VIEM"
Ltd., Russia
DS4H4-6
Calculation of Inductances with 3-D FEM for SRM with Segmental
Rotors and Fully-picthed Windings
Xiaoyuan Chen1, 2, and Jianhua Wu1
1
Zhejiang University, Chian, 2Lishui Uinversity, China
DS4H4-7
Optimization of a Switched Reluctance Motor with Unequal Rotor Arc
Width
Baoquan Kou, He Zhang, Yaru Qu, Hailin Zhang, and Yinxi Jin
Harbin Institute of Technology, China
DS4H4-8
Decoupling Control of Single Winding Bearingless Switched
Reluctance Motors Based on Support Vector Machine Inverse System
Kai Yang1, Zhiying Zhu2, and Yukun Sun2
1
Jiangsu University, China, 2Nanjing Institute of Technology, China
DS4H4-9
Decrease torque ripple for SynRM using barrier arrangement design
Chan-Hee Hong, Huai-cong Liu, Hyun-Soo Seol, Hyun-Woo Jun, and
Ju Lee
Hanyang university, Korea
DS4H4-10
A Novel Rotor Structure Design of Single-Phase Flux Switching
Motor
Zongsheng Zhang, Xiuhe Wang, and Yubo Yang
Shandong University, China
DS4H4-11
Load Characteristics of Position Control using Measured Torque
Curves for Switched Reluctance Motor
Takashi Abe, Yuichiro Tanaka, and Tsuyoshi Higuchi
Nagasaki University, Japan
DS4H4-12
Vibration and Noise Analyzes of Canned Switched Reluctance
Machines with Different Winding Topologies
Christian Laudensack, and Dieter Gerling
Universitaet der Bundeswehr Muenchen, Germany
DS4H4-13
Design of Synchronous Reluctance and Permanent Magnet
Synchronous Reluctance Machines for Electric Vehicle Application
Y. Guan1, Z. Q. Zhu1, I.A.A Afinowi1, J. C. Mipo2, and P. Farah2
1
University of Sheffield, UK, 2Valeo Powertrain Electric Systems,
France
DS4H4-14
Optimal Design of Axial Flux Switched Reluctance Motor for Electric
Vehicle Application
Jimin Ma1, 2, Ronghai Qu1, and Jian Li1
1
Huazhong University of Science and Technology, China, 2Hubei
University of Technology, China
DS4H4-15
Torque Ripple Minimization of Switched Reluctance Motors by
Controlling the Phase Currents During Commutation
Wei Ye, Qishuang Ma, and Jiefeng Hu
Beihang University, China
DS4H4-16
Design of Stator and Rotor for Noise Reduction of SRM
Kotaro Edamura, and Ichiro Miki
Meiji University, Japan
DS4H4-17
Direct Torque and Force Control for Dual-Winding Bearingless
Switched Reluctance Motor
Qin Sun, Xin Cao, and Zhiquan Deng
Nanjing University of Aeronautics and Astronautics, China
DS4H4-18
A New Fault-tolerant Switched Reluctance Motor with reliable fault
detection capability
Kaiyuan Lu
Aalborg University, Denmark
DS4H5 Power Converters 3
Time:
Chairs:
Venue:
10:30-12:00, October 24, Friday
Dr. Sompob Polmai, King Mongkut’s Institute of Technology
Ladkrabang, Thailand
Prof. Kai Sun, Tsinghua University, China
Room H
DS4H5-1
Nonlinear Decoupling Control of Three-Phase AC/DC Voltage-Source
Converters
Dingxin Shuai
PANZHIHUA University, China
DS4H5-2
A Novel 3D Space Vector PWM Control Method for 3D Magnetic
Property Measurement Apparatus
Changgeng Zhang1, Qingxin Yang1, 2, Yongjian Li1, and Jingsi Lu1
1
Hebei University of Technology, China, 2Tianjin Polytechnic
University, China
DS4H5-3
A Novel Soft-Switching DC-DC Converter with High-Step-Down
Conversion
Fen Li, Cailing Huo, Jinbin Zhao, and Keqing Qu
Shanghai University of Electric Power, China
DS4H5-4
Electrolytic Capacitor Free and Reduced 120[Hz] Ripple on the
Output of a Single-Stage CCM Flyback Converter with Power Factor
Correction for LED Lightings
Min-Cheol Chae1, Joonmin Lee1, Jae-Du La3, Young-Jo Kim2, and
Young-Seok Kim1
1
Inha University, Korea, 2Yuhan College, Korea, 3Inha Technical
College, Korea
DS4H5-5
Automatic frequency tuning method of ozone power supply to
optimize ozone generation system
Ju-Kyoung Eom, Min-Gi Kim, Jin-Wook Kang, Bong-Yeon Choi, and
Chung-Yuen Won
Sungkyunkwan University, Korea
DS4H5-6
Comparative Analysis of GaN FET Power System for Maximizing
System Benefit
Jung-Hoon Ahn1, Byoung-Kuk Lee1, and Jong-Soo Kim2
1
Sungkyunkwan University, Korea, 2Daejin University, Korea
DS4H5-7
A New Power Circuit Topology for Energy Router
Sizhao Lu, Zhengming Zhao, Junjie Ge, Liqiang Yuan, and Ting Lu
Tsinghua University, China
DS4H5-8
Impact of Source Internal Resistance on Efficiency of Four Resonant
Wireless Power Transfer Topologies
Yiming Zhang, Ting Lu, Zhengmin g Zhao, Fanbo He, and Liqiang
Yuan
Tsinghua University, China
DS4H5-9
Design and Control of a Novel Electromagnetic Driver for Wireless
Micro-robots
Guoen Cao, and Hee-Jun Kim
Hanyang University, Korea
DS4H5-10
Design of a Wireless Power Transmission System for Portable
Electronic Equipment
Guoen Cao1, Hee-Jun Kim1, Donchul Choi2, Jaewoo Lim1, Puyang
Cheng1, and Seok Bae2
1
Hanyang University, Korea, 2LG Innotek, Korea
DS4H5-11
Considerations of the Influence of Secondary-side Converter Type and
of the Primary-side Inverter Input Voltage on the Efficiency of
Inductive Power Transfer System
Ryosuke Ota1, Nobukazu Hoshi1, and Junnosuke Haruna2
1
Tokyo University of Science, Japan, 2Faculty of Utsunomiya
University, Japan
DS4H5-12
On-Line Measuring Method for High-power IGBT Collector Current
Liang-deng Hu, Chi Sun, Yu-Lin Chen, and Zhi-hua Zhao
Naval University of Engineering, China
DS4H5-13
Comprehensive Comparative Analysis of Two Types of
Commonly-used Layouts of IGBT Packages
Yulin Zhong, Jinlei Meng, Puqi Ning, Dong Zhang, and Xuhui Wen
Chinese Academy of Sciences, China
DS4H5-14
Experimental Research on Stray Inductance Extraction of Planar Bus
Bars Based on HVIGBT Dynamic Characteristics
Liqiang Yuan1, Qing Gu1, Gaohui Feng1, Zhengming Zhao1, Rilong
Yang2, and Wensheng Wang2
1
Tsinghua University, China, 2Beijing Dongfeng Locomotive Electrical
Factory, China
DS4H6 Field Analysis
Time:
Chairs:
Venue:
DS4H6-1
10:30-12:00, October 24, Friday
Prof. Osama Mohammed, Florida International University, USA
Prof. Shiyou Yang, Zhejiang University, China
Room H
Leakage Field Computational Analysis of Closed Slot Motor Based on
Ansoft
Rui Zhou1, Guo-li Li1, Qun-jing Wang1, Guang-hui Fang2, and Xi-wen
Guo1
1
Anhui University, China, 2Jiangnan University, China
DS4H6-2
The Influence of Optimizing Rotor on the Performance and the Iron
Loss of the Permanent Machine
Yanan Yu, Jinhua Du, Deliang Liang, Xing Liu, and Zhe Liang
Xi’an Jiaotong University, China
DS4H6-3
Feature Investigation of Axial Flux Leakage of a Hybrid Excitation
Synchronous Machine
Ye Liu, Zhuoran Zhang, and Ji Dai
Nanjing University of Aeronautics and Astronautics, China
DS4H6-4
Vector Jiles-Atherton Hysteresis Model and Its Application to
Magnetizing Analysis for a Four-pole Isotropic Bonded NdFeB
Permanent Magnet
Dianhai Zhang1, Ziyan Ren1, 2, and Yanli Zhang1
1
Shenyang University of Technology, China, 2Chungbuk National
University, Korea
DS4H6-5
Research of the Demagnetization Mechanism of Line-Start Permanent
Magnet Synchronous Motor under Operating Condition of Sudden
Reversal
Xu Tang, and Xiuhe Wang
Shandong University, China
DS4H6-6
Minimization the Torque Ripple of Flux-Switching Permanent Magnet
Motor Based on Iterative Learning Control
Yejun Gu, Li Quan, and Zixuan Xiang
Jiangsu University, China
DS4H6-7
Electromagnetic Performances Analysis of Flux-Intensifying
Permanent Magnet Synchronous Machine with Modular Fractional
Slot Concentrated Windings
Hongjiao Tu, Xiaoyong Zhu, Li Quan, Long Chen, and Zixuan Xiang
Jiangsu University, China
DS4H6-8
Design and Electromagnetic Performance Analysis of a New
Stator-Permanent Magnet Bearingless Machine
Hongyun Jia1, 2, Shumin Fei1, Ming Cheng1, Jianan Wang1, and Wei
Hua1
1
Southeast University, China, 2Nanjing University of Information
Science and Technology, China
DS4H6-9
Research on Main Insulation Temperature Field for Open-Type High
Energy Density Permanent Magnet Motor
Sen Wang1, Zongshu Lv1, Linyuan Xiao2, Yangyang Zhao1, Hongkui
Yan1, and Guangzhou Qiao1
1
Shenyang Institute of Engineering, China, 2Huazhong University of
Science and Technology, China
DS4H6-10
The Effects of Stator and Rotor Eccentricities on Measurement
Accuracy of Axial Flux Variable-Reluctance Resolver with Sinusoidal
Rotor
Jing Shang, Hao Wang, Mimi Chen, Ning Cong, Yong Li, and
Chengjun Liu
Harbin Institute of Technology, China
DS4H6-11
The Decoupling Study on the Dual-Channel Radial Flux Reluctance
Resolver with Common Magnetic Circuit
Hao Wang, Ning Cong, Tingting Li, Jing Shang, Chengjun Liu, Mimi
Chen, and Yong Li
Harbin Institute of Technology, China
DS4H6-12
Skew Effect on Demagnetization of Permanent Magnet Synchronous
Machines with Three-Phase Short-Circuit Fault
Chen Yu, Ronghai Qu, Wei Xu, and Jian Li
Huazhong University of Science and Technology, China
DS4H6-13
Soft Magnetic Material Degradation due to Manufacturing Process: A
Comparison of Measurements and Numerical Simulations
G. von Pfingsten, S. Steentjes, A. Thul, T. Herold, and K. Hameyer
RWTH Aachen University, Germany
DS4H6-14
Optimal Design Based on Genetic Algorithm and Characteristic Test
for Giant Magnetostrictive Actuator
Jingsong Li1, Qingxin Yang1, 2, Xian Zhang2, and Rongge Yan1
1
Hebei University of Technology, China, 2Tianjin Polytechnic
University, China
DS4H6-15
Comparison of Electromagnetic Performances of Amorphous and
Nanocrystalline Core-Based High Frequency Transformers
Xiaojing Liu1, 2, Youhua Wang1, Md. Rabiul Islam2, Gang Lei2,
Chengcheng Liu1, 2, and Jianguo Zhu2
1
Hebei University of Technology, China, 2University of Technology
Sydney, Australia
DS4H6-16
Analysis of Electromotive Force Characteristics and Device
Implementation for Ferrofluid Based Energy Harvesting System
Dae Woong Oh, Dong Yoon Sohn, Doo Gyoon Byun, and Young Sun
Kim
Joongbu University, Korea
DS4H6-17
Impact of Built-in Lung-Type Magnetic Shielding on Short-Circuit
Strength of Large Power
Bo Zhang1, Yan Li1, and Laiquan Tang2
1
Shenyang University of Technology, China, 2Fudan University, China
DS4H6-18
Time-Stepping Finite Element Analysis on Iron Loss Distribution of
Cage Induction motors
Haisen Zhao1, Bo Wang1, Run-hao Piao1, 2, and Weifu Lu1
1
North China Electric Power University, China, 2Kimchaek University
of technology, Korea
Session DS5H
Oct. 24, 2014 (Fri.), 14:00-15:30 -
DS5H1 PM Motor Drives 5
Time:
Chairs:
Venue:
14:00-15:30, October 24, Friday
Prof. Fengge Zhang, Shenyang University of Technology, China
Prof. Jiwen Zhao, Anhui University, China
Room H
DS5H1-1
An Improved Method to Estimate Initial Rotor Position for
Surface-Mounted Permanent Magnet Synchronous Motors
Leijie He, Jien Ma, Youtong Fang, and Sizhuang Liang
Zhejiang University, China
DS5H1-2
A New Fuzzy Active-disturbance Rejection Controller Applied in
PMSM Position Servo System
Jiang-tao Gai, Shou-dao Huang, Qing Huang, Meng-qiu Li, Hui
Wang, De-rong Luo, Xuan Wu, and Wu Liao
Hunan University, China
DS5H1-3
Position Control for PMSM Servo System Using Non-Smooth
Feedback and Disturbance Estimation Compensation
Jie Zhang, Chuang Liu, Renhua Jiang, and Chengyu Wang
Nanjing University of Aeronautics and Astronautics, China
DS5H1-4
A Novel Acceleration Estimation Algorithm for Mechanical Vibration
Suppression of Two-Mass System
Jie Jin1, 2, and Surong Huang1
1
Shanghai University, China, 2Shandong Institute of Business and
Technology, China
DS5H1-5
An Enhanced Reliability Method of Initial Angle Detection on Surface
Mounted Permanent Magnet Synchronous Motor
Keyuan Huang, Li Wang, Zhi Jiang, and Shoudao Huang
Hunan University, China
DS5H1-6
A Small Size and Low Cost Controller of Permanent Magnet
Synchronous Motor
Cheng Zhu, Kai Yang, Yang Liu, YingLi Zhang, ZhiCheng Pan, and
XuBiao Wei
HuaZhong University of Science and Technology, China
DS5H1-7
Experimental Verification of Novel Hydrogen Supply System on a
High-Pressure Tankless Fuel Cell Electric Vehicle
Sho Nakata1, Keisuke Tomoda1, Nobukazu Hoshi1, and Junnosuke
Haruna2
1
Tokyo University of Science, Japan, 2Utsunomiya University, Japan
DS5H1-8
Overcurrent Suppression Scheme for DC Bus Current at Sudden Load
Change of Interior Permanent Magnet Synchronous Motor
Tomohiro Oba1, Nobukazu Hoshi1, Kazunari Akiyama2, Hiroki
Suemasu2, Hiroshi Matsuoka2, and Junnosuke Haruna3
1
Tokyo University of Science, Japan, 2ACR Co., Ltd., Japan,
3
Utsunomiya University, Japan
DS5H1-9
Influence of Periodic Carrier Frequency Modulation on Stator Steel
Core Loss and Rotor Eddy Current Loss of Permanent Magnet
Synchronous Motor
Yongxiang Xu, Qingbing Yuan, Jibin Zou, and Hao Wang
Harbin Institute of Technology, China
DS5H1-10
Influence of Periodic Carrier Frequency Modulation on Inverter Loss
of Permanent Magnet Synchronous Motor Drive System
Yongxiang Xu, Qingbing Yuan, Jibin Zou, and Hao Wang
Harbin Institute of Technology, China
DS5H1-11
Research on Single-Pulse Control of Traction PMSM in High Speed
Train Based on Co-Simulation Model
Hao Kong1, Jiameng Shi1, Liren Huang1, Qinfen Lu1, Yunyue Ye1, and
Zhongqi Jiang2
1
Zhejiang University, China, 2Wuhan University of Science and
Technology, China
DS5H1-12
Comparison of Synchronization Control Techniques for Traction
Motors of High-Speed Trains
Jian Li1, Youtong Fang1, Xiaoyan Huang1, and Jing Li2
1
Zhejiang University, China, 2University of Nottingham, UK
DS5H1-13
Elevator Energy Regenerative Unit (EERU) for Energy Saving in a
Permanent Magnet Motor Elevator System
Boonyang Plangklang1, Sittichai Kantawong2, Sirichai Dangeam1, and
Yuttana Kumsuwan3
1
Rajamangala University of Technology Thanyaburi, Thailand, 2
Metropolitan Waterworks Authority Laksi, Thailand, 3Chiang Mai
University, Thailand
DS5H1-14
Optimal Design of Interior Permanent Magnet Synchronous Machine
for Electric Spindle
Zhicheng Pan, Kai Yang, XuBiao Wei, Cheng Zhu, and Yingli Zhang
Huazhong University of Science and Technology, China
DS5H1-15
Optimal Efficiency Control of Modular PMSM on EVs Based on Iso
Efficiency Contours
Yingli Zhang, Kai Yang, Hongqin Xie, Cheng Zhu, Xubiao Wei, and
Zhicheng Pan
Huazhong University of Science and Technology, China
DS5H1-16
Analysis and Reducing Methods of Cogging Torque on Permanent
Magnet AC Servo Motor
Chengtao Dang1, Wei Zhou2, Licheng Yin3, and Ningze Tong1
1
Servo System Design and Research Institution of ARIM, China,
2
Beijing Martial Delegate Agency, Chian, 3Central Iron and Steel
Research Institute National Analysis Center for Iron & Steel, China
DS5H1-17
Bearingless Motor’s Radial Suspension Force Control Based on
Virtual Winding Current Analysis
Hui Li, and Huangqiu Zhu
Jiangsu University, China
DS5H1-18
Calculation of Magnets’ Average Operating Point during the Starting
Process of Line-Start Permanent Magnet Synchronous Motor
Xu Tang, and Xiuhe Wang
Shandong University, China
DS5H1-19
Comparison of Torque Densities in Alternate Wound-Field Switched
Flux Machines
Y.J. Zhou, Z.Q. Zhu, and X. Ge
University of Sheffield, UK
DS5H1-20
Study on Key Technologies of Permanent Magnet Synchronous Motor
Design for Electric Vehicle
Ying Xie1, Hongyan Ge1, Zhongxue Yang2, and Sen Lv1
1
Harbin University of Science and Technology, China, 2Northeast
Petroleum University, China
DS5H2 Special Machines and Actuators 3
Time:
Chairs:
Venue:
14:00-15:30, October 24, Friday
Prof. Hyun-Kyo Jung, Seoul National University,Korea
Prof. Liyi Li, Harbin Institute of Technology, China
Room H
DS5H2-1
Analysis of Torque Characteristics of Magnetic Gears
Jingang Bai, Yong Liu, Jia Lin, Zhiyi Song, and Weinan Wang
Harbin Institute of Technology, China
DS5H2-2
Modelling and Design of Complex Geometry Parts Vibratory
Conveying
Dan Shi, Yoan Civet, and Yves Perriard
École Polytechnique Fédérale de Lausanne, Switzerland
DS5H2-3
Adaptive Fuzzy Tracking Control Based on Backstepping for
Permanent Magnet Spherical Motor
Yan Wen, Qunjing Wang, Guoli Li, and Xiwen Guo
Anhui Univesity, China
DS5H2-4
Rotor Orientation Detection Method of Spherical Motor Based on
Single 2-DOF Optical Sensor
Yan Wang, Qunjing Wang, Zhe Qian, Yan Wen, and Shan Ma
Anhui University, China
DS5H2-5
Research of Orientation Detection Method for Spherical Motor and
Effect on PD Control System Based on Machine Vision
Zhe Qian, Qunjing Wang, Xiwen Guo, Guoli Li, and Shan Ma
Anhui University, China
DS5H2-6
Adaptive Fuzzy Decoupling Control for Permanent Magnet Spherical
Motor Dynamic System
Xiwen Guo, Qunjing Wang, Guoli Li, Zhe Qian, Yan Wen, Yuan Zhao,
and Yaqin Yin
Anhui University, China
DS5H2-7
Optimisation of the Mover Kinetic Energy of a Miniature Linear
Actuator
Romain Besuchet, and Yves Perriard
École Polytechnique Fédérale de Lausanne, Switzerland
DS5H2-8
A Novel Electronically-Controlled Linear Escapement Mechanism
Romain Besuchet, Yoan Civet, and Yves Perriard
École Polytechnique Fédérale de Lausanne, Switzerland
DS5H2-9
Design of a Cylindrical Moving Core Small Linear PM Oscillatory
actuator
Jinhua Chen, Youyong Liao, Chi zhang, and Peng Sun
Chinese Academy of Sciences, China
DS5H2-10
A Study of Network Emulation for IP Network-based Control System
of a Small Motor
Kenshi Matsuo, and Katsubumi Tajima
Akita University, Japan
DS5H2-11
Dual-Redundancy PMSM Servo System: Using Single Neuron PID
Controller
Zhe Liang, Deliang Liang, Peng Kou, and Qiji Ze
Xi'an Jiaotong Univerisity, China
DS5H2-12
Speed Control with Vibration Suppression of Two-inertia Servo
System Based on Resonance Ratio Control
Ran Cao, Shuanghong Wang, and Jianbo Sun
Huazhong University of Science and Technology, China
DS5H2-13
A Method of Speed Observation Based on Least-squares Linear-fitting
with Weight Factor
Wenbin Qiu, Jianyun Chai, Xudong Sun, and Rui You
Tsinghua University, China
DS5H2-14
Servo Control Technique of Gyro Stabilized Platform for Gravimeter
Yongqing Wei, Jiangning Xu, and Heng Ma
Naval University of Engineering, China
DS5H2-15
Modeling and Composite Nonlinear Feedback Control of Voice Coil
Motor in High Precision Positioning System
Qiming Chen, Liyi Li, Le Pei, and Pengcheng Du
Harbin Institute of Technology, China
DS5H2-16
Performance improvement in Mini-type Brushless DC Motors with
Fractional-Slot Concentrated Windings
Dongwen Wang, Ningze Tong, Chongjian Li, Chao Liu, and Chengtao
Dang
Automation Research and Design Institution of Metallurgical Industry,
China
DS5H2-17
Design and Manufacture of LLC Resonant ultrasonic motor drive
circuit
Peng Pan, Long Jin, Zhike Xu, and Qianqian Wang
Southeast University, China
DS5H2-18
Control Scheme for Obstacle Avoidance Navigation of Autonomous
Mobile Robots
Youn-Ho Choi, and Dong-Ha Lee
Daegu Gyeongbuk Institute of Science and Technology, Korea
DS5H2-19
Design and Characteristics of Novel 2-Phase 4/3 Switch Reluctance
Motor
Pham Trung Hieu, Dong-Hee Lee, and Jin-Woo Ahn
Kyungsung University, Korea
DS5H3 Linear Machines and Magnetic Levitation 3
Time:
Chairs:
Venue:
14:00-15:30, October 24, Friday
Dr. Jean-Claude Mipo, Valeo Powertrain Electric Systems, France
Dr. Weizhong Fei, Cranfield University, UK
Room H
DS5H3-1
Chaos Genetic Algorithm Optimization Design Based on Linear
Motor
Hongkui Yan1, Zongshu Lv1, Yangyang Zhao1, Guangzhou Qiao1,
Linyuan Xiao1, Zhou Yang1, Kexuan Gao1, and Shutan Gao2
1
Shenyang Institute of Engineering, China, 2North China Electric
Power University, China
DS5H3-2
The Chaos Research on Anti-control of BLDCM of Electrical Vehicle
Lidong Liu
Guidaojiaotong Polytechnic Institute, China
DS5H3-3
Research on Linear Induction Motor of Stereo Garage with Low
Frequency
Qinfen Lu1, Yihua Yao1, Yunyue Ye1, and Zhongqi Jiang2
1
Zhejiang Unviersity, China, 2Wuhan University of Science and
Technology, China
DS5H3-4
A Novel Series Block Feeding Method for Long Primary Linear
Motor
Mingyuan Zhang, Chengmei Lin, Na He, Weichao Li, and Jin Xu
Naval University of Engineering, China
DS5H3-5
Flux Leakage Analysis of Transverse-Flux PM Linear Machine
Bin Yu, Ping Zheng, Bing Xu, Jing Zhang, and Liang Han
Harbin Institute of Technology, China
DS5H3-6
Design of Particle Swarm Optimized PID For Permanent Magnet
Synchronous Linear Motor
Xudong Wang, Tao Xia, Xiaozuo Xu, and Haichao Feng
Henan Polytechnic University, China
DS5H3-7
A Design of Eddy Current Brake for Rail Vehicle Training Set
Sirichai Dangeam1, and Vijit Kinnares2
1
Rajamangala University of Technology, Thailand, 2King Mongkut’s
Institute of Technology, Thailand
DS5H3-8
Research on Control Strategy of Free-Piston Stirling-Engine
Linear-Generator System
Ping Zheng, Bin Yu, Shaohong Zhu, Quanrong Gong, and Jiaqi Liu
Harbin Institute of Technology, China
DS5H3-9
A Proposal of a Novel Identification Method of Radial Force
Parameters for Bearingless Motors
Nozomu Ando, Masahiro Nakao, Kimio Hijikata, and Yasuhiro Tanaka
Tokyo City University, Japan
DS5H3-10
A Decoupling Method for Current Regulation in Bearingless Motors
Using AC Suspension Current
Kimio Hijikata1, Nozomu Ando1, Masatsugu Takemoto2, Satoshi
Ogasawara2
1
Tokyo City University, Japan, 2Hokkaido University
DS5H3-11
Finite Element Analysis of a Novel Bearingless Flux-Switching
Permanent Magnet Motor with the Single Winding
Hongyun Jia1, Chao Fang1, and Tao Zhang2
1
Nanjing University of Information Science and Technology, China,
2
Huaiyin Institute of Technology, China
DS5H3-12
Implicit Generalized Predictive Control of an Active Magnetic
Bearing System
Chang Wu, and Changsheng Zhu
Zhejiang University, China
DS5H3-13
Design of a High-Performance Linear Permanent Magnet Gear
Lili Wang1, Mengjia Jin2, Jianxin Shen2, Zehua Huang1, and Jing
Wang1
1
State Grid, China, 2Zhejiang University, China
DS5H3-14
Multiple Linear Motor Control System Based on FPGA
Yanwu Xu, Jiwen Zhao, and Jian Huang
Anhui University, China
DS5H4 Thermal Analysis & Cooling
Time:
Chairs:
Venue:
14:00-15:30, October 24, Friday
Prof. Jin-Woo Ahn, Kyungsung University, Korea
Prof. Ming Cheng, Southeast University, China
Room H
DS5H4-1
Preliminary Study of a Relay Transmitted Cooling System with Heat
Pipes and LHP System in Large Capacity Gas Insulated Transformers
Wenhao Niu1, 2, Guoqiang Zhang1, and Haifeng Zhong1, 2
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
DS5H4-2
Research on Two-phase Flow Instability in Parallel Inclined Hollow
Conductors in the Evaporative inner Cooling Power Generator
Jing Yan, and Shunzhou Yu
Chinese Academy of Sciences, China
DS5H4-3
Analysis of Heat Transfer Performance for Megawatt Wind Generator
in High Altitude Extreme Conditions
Shuye Ding, Xiufeng Zhang, and Tianyu Guan
Harbin University of Science and Technology, China
DS5H4-4
Fluid-to-fluid Modeling Study on Critical Heat Flux of R134a Flow
Boiling in Helically-Coiled Horizontal Tubes
Meixia Wang1, 3, Jitian Han1, Cuilian Ji1, 2, Li Shao1, and Zhixiong
Guo3
1
Shandong University, China, 2Shandong Urban Construction
Vocational College, China, 3The State University of New Jersey,
America
DS5H4-5
Numerical Simulation of Air Flow Distribution in Large Air-cooled
Turbo Generator Rotor at Different Rotation Speed and Inlet Pressure
Zuomin Wang, and Jiade Han
Harbin University of Science and Technology, China
DS5H4-6
Effect of flow rate on the gas-liquid two-phase pressure drop in the
evaporative cooling generator stator bar
Shunzhou Yu1, Jing Yan1, and Jing Cai2
1
Chinese Academy of Sciences, China, 2Changcheng Institute of
Metrology & Measurement, China
DS5H4-7
Temperature Field and Heat Load Research for Main Propellant Direct
Drive Permanent Magnet Motor of Unmanned Aerial Vehicle
Sen Wang1, Zongshu Lv1, Yangyang Zhao1, Hongkui Yan1, Yanlong
Ren2, Linyuan Xiao1, and Guangzhou Qiao1
1
Shenyang Institute of Engineering, China, 2PLA, China
DS5H4-8
3D Steady-State Thermal Load Analysis of the Bus-bar in Large-Scale
Generator with Evaporative Cooling System
Jinxiu Chen1, 2, Haihong Dong1, and Lin Ruan1
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
DS5H4-9
Research on Evaporative Cooling Medium for Large Generator
Huichuang Chen1, Shunzhou Yu2, Guanghui Zhu1, and Weiguo Xu1
1
Zhejiang Research Institute of Chemical Industry, LTD., China,
2
Chinese Academy of Sciences, China
DS5H4-10
Steady-state Performance of Evaporative Cooling System of Stator
Busbar in Hydro-generator
Haihong Dong, Lin Ruan, Rui Cao, and Shuqin Guo
Chinese Academy of Sciences, China
DS5H4-11
Temperature Rise Anomaly Analysis of the Stator Winding in
Large-Capacity High-Torque-Density Evaporate Cooling Induction
Motor
Zhongjun Yu, and Dong Wang
Naval University of Engineering, China
DS5H4-12
Research on Motor Iron Losses and Temperature Field Calculation for
Mini Electric Vehicle
Cuiping Li1, Pujia Cao1, Shukang Cheng2, and Feng Chai2
1
Northeast Dianli University, China, 2Harbin Institute of Technology,
China
DS5H4-13
Analysis of Gas-Liquid-Solid Stator-insulation System in the
Evaporative Cooling Turbo-generator
Zhi Liu, and Lin Ruan
Chinese Academy of Sciences, China
DS5H4-14
Theoretical and Experimental Study of the Influence of Different
Spray Inclinations and Positions on Spray Cooling Heat Transfer
Peng Zhang, and Lin Ruan
Chinese Academy of Sciences, China
DS5H4-15
Analysis of 3D Thermal Field in the Stator of High-capacity and
High-torque-density Motor with Forced Evaporative-cooling System
Fan Zhang, Dezhi Liu, Zhongjun Yu, and Junquan Chen
Naval University of Engineering, China
DS5H4-16
A Study of Reliability Improvement of High Capacity Cooling System
for Machine Tool
Baek Ju Sung, and Do Sik Kim
Korea Institute of Machinery & Materials, Korea
DS5H4-17
Cooling Method of Periodic Pulse-type Linear Induction Motor
Armature
Lu Lu, Weiming Ma, Yuxing Zhang, Bin Ouyang, NaHe, and Anqi Hu
Naval University of Engineering, China
DS5H4-18
Current Progress in High Thermal Conducing Insulation Technology
for Large Capacity Turbine Generator
Takashi Harakawa, Fumio Sawa, Tetsushi Okamoto, Hiroshi Hatano,
and Ken Nagakura
Toshiba Corporation, Japan
DS5H4-19
Optimization Design and Analysis of Cooling System Used for Mini
Electric Vehicle Motor
Cuiping Li1, Feng Chai2, Xichao Feng1, and Shukang Cheng2
1
Northeast Dianli University, China, 2Harbin Institute of Technology,
China
DS5H5 Power Converters 4
Time:
Chairs:
Venue:
14:00-15:30, October 24, Friday
Prof. Yaohua Li, Institute of Eletrical Engineering Chinese Academy of
Sciences, China
Prof. Chang-Chou Hwang, Feng Chia University, Taiwan
Room H
DS5H5-1
Research on Matrix Converter Operated as Static Reactive Power
Generator
Mingming Shi, Bing Chen, Dan Gong, and Xiaodong Yuan
Jiangsu Electric Power Research Institute, China
DS5H5-2
Chain Circuit Active Power Filter for High Voltage High Power
Applications
Junling Chen1, 2, and Xuefei Yuan1
1
Engineering Technology Research Center for Power Qaulity Control
of Guangdong Province, China, 2Zhuhai Wanlida electric Co., LTD,
China
DS5H5-3
Reactive Power and Harmonics Compensation Using A Flying
Capacitor Multilevel Inverter
Pratompong Wijit, and Sompob Polmai
King Mongkrut's Institute of Technology Ladkrabang, Thailand
DS5H5-4
Suppression of Sub-synchronous Oscillation Caused by HVDC Using
Supplementary Excitation Damping Controller
Xinghua Dong, Xiuhe Wang, and Yubo Yang
Shandong University, China
DS5H5-5
Control and Experiment of a Modular Multilevel Converter-Based
HVDC Transmission System
Yongjie Luo1, 2, Yaohua Li1, Zixin Li1, Ping Wang1, Cong Zhao1, 2, and
Zhandong Sun1, 2
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
DS5H5-6
Performance Study of Solid State Transformer Applying BP Artificial
Neural Network PID Regulator
Qingshan Wang, Deliang Liang, and Jinhua Du
Xi'an Jiaotong University, China
DS5H5-7
Parameter Design Principle of the Capacitors and Inductors in the
Power Electronic Transformer Based on MMC
Zhandong Sun1, 2, Y. H. Li1, P. Wang1, Z. X. Li1, Y. J. Luo1, 2, and P.
Qu1, 2
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
DS5H5-8
High Voltage, High Power and Medium-Frequency Power
Transformer Parameters Design
Zhan Shen, Long Jin, Jun You, Jianfeng Zhao, Peng Pan, and Peng
Zhu
Southeast University, China
DS5H5-9
A simplified method for controlling the Modular Multi-level
Converter energy based on modified Carrier Phase-Shift Modulation
Wu Liao, Shoudao Huang, Sheng Huang, and Yanchao Chu
Hunan University, China
DS5H5-10
Control Strategy for Balancing Capacitor Voltage of Modular
Multilevel Converter
Shang Ma, Yi Wang, Jinli Lv, and Guolong Yu
North China Electric Power University, China
DS5H5-11
Comparison of Different DC-Link Voltage Balancing Methods for
Cascade H-Bridge Multilevel Converter
Xiaojun Li, H. Geng, G. Yang, Ruiqi Li, and Chao Zhang
Tsinghua University, China
DS5H5-12
Research and Design on Multi-target Current Tracking Control
Strategy of Cascaded H-bridge Static Var Generator
Yannan Yu1, 2, Dianguo Xu1, Jian Wu1, Rong Xu1, Yong Yu1, Rongfeng
Yang1, and Jichi Yan1
1
Harbin Institute of Technology, China, 2Heilongjiang University of
Science and Technology, China
DS5H5-13
Circulating Current Analysis and Suppression of Modular Multilevel
Converters
Xing Zhang1, 2, and Ping Wang1
1
Chinese Academy of Sciences, China, 2University of Chinese
Academy of Sciences, China
DS5H5-14
A Novel Modulation with Voltage Balancing Control for a Modular
Matrix Converter
Yao Li, Lie Xu, and Yongdong Li
Tsinghua University, China
DS5H5-15
A Voltage Balancing Controller with Fuzzy Logic Strategy for Neutral
Point Clamped Multilevel Converter
Bingyong Tai, Congzhe Gao, Xiangdong Liu, and Jingliang Lv
Beijing Institute of Technology, China
DS5H5-16
A Universal Power Loss Estimator for Three Level IGCT Converter
Luyao Xie, Guoqing Weng, Jun Qi, and Youbing Zhang
Zhejiang University of Technology, China