Push Buttons and Operator Interface
Specifier’s Guide
Type K – Rotary Cam Switch
File 9003
CONTENTS
Schneider Electric Brands
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Type K Rotary Cam Switch: 2, 3 and 4 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Type K Rotary Cam Switch: 5, 6 and 7 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . 236
Type K Rotary Cam Switch: 8, 9 and 10 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . 237
Type K Rotary Cam Switch Operators and Handles. . . . . . . . . . . . . . . . . . . . . . . . 238
Accessories, Legends and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
Type K Rotary Cam Switch Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
Type K Rotary Cam Switch Markings and Special Markings . . . . . . . . . . . . . . . . . 241
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350
Push Buttons and Operator Interface Specifiers Guide
Class 9003, Type K – Rotary Cam Switch
The Class 9003 Type K2 rotary cam switch is a versatile means of providing inexpensive logic control. The Type K cam switch is available with:
Up to 12 switching positions
Up to 20 contacts
●
●
●
●
Worldwide Acceptance
Standard or custom configured sequences
●
Attractive operator/handle appearance
A complete rotary cam switch consists of up to four items. This includes the contact block assembly, the operator/handle, a legend (if desired), and any
special accessories (if required).
A.
There are two ways of ordering a Class 9003 Type K rotary cam switch contact block assembly.
1. If the desired contact sequence can be found on Pages 235 through 237, order the class and type of the device.
2. If the contact sequence cannot be found on Pages 235 through 237, use the keysheet on Pages 240 through 242. Indicate the exact contact configuration desired. Devices will be assembled at the factory per this keysheet.
B.
Operators/handles are listed on Page 238. The operator/handle is chosen depending on the application and size of the rotary cam switch.
C.
Many operators/handles come standard with a blank legend plate. Separate legends for operators without blank legend plates or when an additional
legend is desired are listed on Page 239. Page 239 contains a chart on the maximum characters allowed on all legend plates.
D.
All accessories are listed on Page 239.
Example – Below is an explanation of the Contact Sequence/Wiring
Diagrams found on Pages 235 through 237.
1
1. Vertical arrow indicates contact status at 0° (up) handle position.
2. Terminal identification, terminals 1 and 2 are one contact.
3. Contact 3-4 is closed between 2nd and 4th position. The “H” indicates
that the contact does not open while switching from one position to another.
4. Contacts 5-6 and 7-8 overlap between positions 4 and 5.
5. Jumpers installed by factory between terminals 2 and 4, 6 and 12, 8
and 10.
6. Horizontal arrow indicates spring return to previous position.
7. Contact 1-2 is open in third position.
8. Contact 1-2 is closed in second position.
9. A “1” in adjacent boxes does not assure that the contact remains
closed while switching between adjacent positions.
10. Contact 11-12 closes momentarily when switching from position 3
to position 4. This contact is not closed at position 3 or at position 4.
6
2
2
1
3
5
7
8
9
11
9
2
4
6
8
7
3
4
4
5
5
5
10
12
10
Only an example! – Contact your local Square D Sales Office for conditions on
Spring Return and Jumper options and pricing.
Contact Ratings
The following contact rating charts are to be used in properly sizing a Class 9003 Type K rotary cam switch to a particular application. The UL ratings
chart below reflects the ratings to UL specifications. The UL file is E164864. The Class 9003 Type K2 is UL Listed per guide NLRV. The lower chart is
contact ratings per German specification VDE 0660. The CSA file is LR 44087, Class 3211 03 or Class 3211 05.
UL Ratings
Contact
Block
Assembly
Maximum
V
General
Purpose
A
K2
300
12
110V120V
HP
0.5
Horsepower 1 PH - 2 pole 60 Hz
200V220V440V208V
240V
480V
HP
HP
HP
1
1
–
550V600V
HP
–
110V120V
HP
1.5
Horsepower 3 PH - 3 pole 60 Hz
200V220V440V208V
240V
480V
HP
HP
HP
2
3
–
550V600V
HP
–
®
X
X
Electrical Ratings (VDE 0660)
Rated Continuous
Current Current Ith2
Shaft
Con- Dias
tact men- Load
Block sions
Break
Switch In
EnIa
Free closed
AIr
In
Free
Air
Utilization
Category
AC1 Ie
Rated
Operational Current Ie
Utilization Category
AC1
Utilization Category
AC2 and AC3
Utilization Category
AC3 and AC3
Rated Operation
Current Ie
Utilization
Category AC11
Operational Voltages
1 PH
Rated
Emer- EmerInsu- Main gency
gency
For Y-Delta Starters 240 V 415 V 500 V lation Switch
Stop Main
VoltSwitch Switch
age
220 V415 V500 V660 V240 V415 V 220 V 415 V 500 V 660 V 240 V 415 V 220V 415 V500 V660 V
kW kW kW kW kW kW kW kW kW
cmm
A
A
A
A
kW kW kW kW kW kW kW
A
A
A
V
V
V
V
A
A
A
A
2.2
4
4
4
K2
6
20
20
16
16
6 10.5 14 14 4.5 7.5 8.5 8.5 6.5
1.3 2.2 2.5 4.5 4.5 4.5
4
3
2
660
500
660
500
5
c All dimensions are in millimeters (mm). To convert to approximate inch dimensions, divide mm by 25.4.
3 PH 3 Pole
1 PH 2
Pole
3 PH 3 Pole
1 PH 2
Pole
234
© 1999 - 2000 Schneider Electric All Rights Reserved
11/00
Push Buttons and Operator Interface Specifiers Guide
Class 9003, Type K – Rotary Cam Switch
A complete rotary cam switch consists of: 1) Contact block assembly — see below. 2) Operator/handle — see Page 238.
3) Legend — see Page 239. 4) Any required accessories — see Page 239.
2 and 3 Contacts
4 Contacts
Contact Sequence
Wiring Diagram
1
3
45°
2
4
1
3
45°
2
4
1
3
2
4
1
3
2
4
1
3
Switching
Angle
2
4
Panel Mountingt
Type
45°
K2B002A
45°
K2B002GA
45°
K2B002NA
45°
K2B002QA
1
3
2
4
45°
K2B003T
1
3
2
4
45°
K2B004T
1
3
2
4
45°
K2B006T
45°
K2C002LA
1
3
5
2
4
6
45°
1
3
5
2
4
6
1
3
5
1
3
5
1
3
5
45°
2
4
6
45°
2
4
6
2
4
6
2
4
6
8
Switching
Angle
Panel Mountingt
Type
45°
K2D002S
45°
K2D002UA
45°
K2D003LA
45°
K2D004A
45°
K2D004GA
45°
K2D004NA
45°
K2D004QA
30°
K2D005T
30°
K2D012GA
45°
K2D012NA
45°
K2D012QA
K2B001UA
2
4
2
4
6
1
3
5
7
K2B001S
1
3
1
3
5
Contact Sequence
Wiring Diagram
1
3
5
7
2
4
6
8
1
3
5
7
2
4
6
8
1
3
5
7
2
4
6
8
1
3
5
7
2
4
6
8
1
3
5
7
2
4
6
8
1
3
5
7
2
4
6
8
1
3
5
7
2
4
6
8
K2C003A
K2C003GA
K2C003NA
45°
K2C003QA
45°
K2C007T
1
3
5
7
2
4
6
8
1
3
5
7
1
3
5
7
2
4
6
8
2
4
6
8
t Contact local Square D Company sales office for ordering information on base mounting contact
block assemblies.
235
11/00
© 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
Class 9003, Type K – Rotary Cam Switch
A complete rotary cam switch consists of: 1) Contact block assembly — see below. 2) Operator/handle — see Page 238.
3) Legend — see Page 239. 4) Any required accessories — see Page 239.
5 and 6 Contacts
6 And 7 Contacts
Contact Sequence
Wiring Diagram
1
3
5
7
9
Switching
Angle
2
4
6
8
10
1
3
5
7
9
45°
2
4
6
8
10
45°
1
3
5
7
9
2
4
6
8
10
1
3
5
7
9
45°
2
4
6
8
10
1
3
5
7
9
11
45°
2
4
6
8
10
12
1
3
5
7
9
11
45°
2
4
6
8
10
12
1
3
5
7
9
2
4
6
8
10
11
12
45°
45°
1
3
5
7
2
4
6
8
9
11
10
12
45°
1
3
5
7
2
4
6
8
9
11
10
12
45°
Panel Mounting t
Type
Contact Sequence
Wiring Diagram
1
3
5
7
9
11
K2E003WA
2
4
6
8
10
12
1
3
5
7
9
2
4
6
8
10
11
12
K2E005A
1
3
5
7
9
11
K2E005NA
2
4
6
8
10
12
1
3
5
7
9
11
K2E005QA
K2F003SA
2
4
6
8
10
12
1
3
5
7
9
2
4
6
8
10
11
12
1
3
5
7
9
11
K2F006A
Switching
Angle
2
4
6
8
10
12
1
3
5
7
9
2
4
6
8
10
11
12
Panel Mounting t
Type
45°
K2F013GA
45°
K2F013NA
45°
K2F013QA
60°
K2F013UA
45°
K2F022GA
45°
K2F022NA
45°
K2F022QA
45°
K2G007NA
45°
K2G007QA
45°
K2G007A
K2F003UA
1
3
5
7
2
4
6
8
9
10
11
13
12
14
K2F006NA
K2F006QA
t Contact local Square D Company sales office for ordering information on base mounting contact
block assemblies.
1
3
5
7
2
4
6
8
9
10
11
13
12
14
1
3
5
7
9
2
4
6
8
10
11
12
13
14
236
© 1999 - 2000 Schneider Electric All Rights Reserved
11/00
Push Buttons and Operator Interface Specifiers Guide
Class 9003, Type K – Rotary Cam Switch
A complete rotary cam switch consists of: 1) Contact block assembly — see below. 2) Operator/handle — see Page 238.
3) Legend — see Pages 239. 4) Any required accessories — see Page 239.
8 Contacts
9 and 10 Contacts
Contact Sequence
Wiring Diagram
1
3
5
7
2
4
6
8
9
11
13
15
10
12
14
16
1
3
5
7
2
4
6
8
9
11
13
15
10
12
14
16
Switching
Angle
45°
45°
2
4
6
8
10
11
13
15
12
14
16
1
3
5
7
9
2
4
6
8
10
11
13
15
12
14
16
1
3
5
7
2
4
6
8
9
11
13
15
10
12
14
16
1
3
5
7
2
4
6
8
9
11
13
15
10
12
14
16
2
4
6
8
9
11
13
15
10
12
14
16
9
11
13
15
10
12
14
16
45°
2
4
6
8
9
11
13
15
10
12
14
16
K2H008NA
45°
K2H014GA
45°
1
3
5
7
2
4
6
8
10
11
13
15
17
12
14
16
18
Panel Mounting t
Type
30°
K2I009NA
30°
K2I009QA
45°
K2I023GA
45°
K2I023NA
45°
K2I023QA
45°
K2K005SA
K2H004UA
K2H008QA
45°
Switching
Angle
1
3
5
7
9
K2H004S
30°
45°
1
3
5
7
2
4
6
8
Contact Sequence
Wiring Diagram
Type
1
3
5
7
1
3
5
7
9
1
3
5
7
Panel Mounting t
2
4
6
8
9
10
11
13
15
17
12
14
16
18
1
3
5
7
2
4
6
8
9
11
13
15
17
10
12
14
16
18
1
3
5
7
2
4
6
8
9
11
13
15
17
10
12
14
16
18
K2H014NA
K2H014QA
K2H032NA
1
3
5
7
2
4
6
8
9
11
13
15
17
10
12
14
16
18
1
3
5
7
2
4
6
8
9
11
13
15
17
19
10
12
14
16
18
20
t Contact local Square D Company sales office for ordering information on base mounting contact
block assemblies.
45°
K2H032QA
237
11/00
© 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
Class 9003, Type K – Rotary Cam Switch
The following operators/handles are for the Class 9003 Type K2 Rotary Cam Switches. These are single hole mounting, and are mounted in a 22 mm
(7/8 inch) diameter mounting hole. All meet protection category IP-65.
Description
Black Bezel
Black Knob
KAB1A
Style
Bezel – Small square similar to 9001D1
and D2 operators.
Does not include
blank legend plate.
Knob
Key t
KAB1S
Knob
Bezel – Small round similar
to 9001D3 and D4 operators.
Does not include
blank legend plate.
Key t
–
KBA1A
KAA1S
–
KBA1S
KAA2B
Key t
Yellow Bezel
Red Knob
–
KBB1S
KAA1A
Knob
Bezel – Large round.
Does not include
blank legend plate.
Chrome Bezel
Black Knob
KBB1A
–
KBA2B
KAA2S
KCA2L
KBA2S
–
Chrome XB2B Style Handle
Standard Handle
Requires KZ127 Adapter
Page 239
Knob
–
XBCZ1M12
–
Chrome XB2B Style Handle
Extended Handle
Requires KZ127 Adapter
Page 239
Knob
–
XBCZ1C12
–
Chrome XB2B Style Handle
Key Handle (Ronis 455)
Requires KZ127 Adapter
Page 239
Bezel – 45 x 45 mm.
Includes blank
legend plate.
30° Key
45° Key
60° Key
90° Key
Knob
–
KAC1B
Key t
KAC1S
Knob
Bezel – 60 x 60 mm.
Includes blank
legend plate.
XBCZ1S131
XBCZ1S141
XBCZ1S161
XBCZ1S191
KBC1B
KCC1L
KBC1S
KAD1C
Key t
–
–
KBD1C
KAD1S
KCD1M
KBD1S
–
t Key withdrawal codes.
When ordering a Key operator for a contact block assembly, the switching angle of the contact block assembly must
first be known. From the chart at right, choose the appropriate suffix for the desired switching angle. This suffix is
added to the end of the operator/handle’s type number.
Example: 45° switching for 9003KAB1S – KAB1S16
Note: Key is removable in all positions.
Replacement Key is Class 9001Z18.
The following operators/handles are for the Class 9003 Type K2 Rotary Cam Switches with 90° switching angle and only two positions.
Description
Black Bezel
Black Knob
Yellow Bezel
Red Knob
KAD1X
KCD1Y
For Size K2
Bezel – 60 x 60 mm
Mounting – 22 mm (7/8 inch)
Marked 9-30
(see Catalog 9001CT9701)
No other markings available
The following operators/handles are for 4 hole mounting of the Class 9003 Types K2 rotary cam switch. They are suitable for panel mounting or base
mounting of contact block assemblies. See description below for proper sizing of operators/handles and contact block assemblies. These operators
provide protection category IP-40. See Page 239 for gaskets.
Black Legend
Black Knob
Chrome Legend
Black Knob
Yellow Legend
Red Knob
For size K2
Bezel 45 x 45 mm
KAE1B
KBE1B
KCE1L
For size K2
Bezel 60 x 60 mm
KAF1C
KBF1C
KCF1M
Description
Includes blank
bezel legend
The following operators/handles are for 4 hole mounting of the Class 9003 Types K2 rotary cam switches with 90° switching angle and only two positions.
Description
Black Operator
Black Knob
Yellow Operator
Red Knob
KAF1X
KCF1Y
For size K2
Bezel 60 x 60 mm
Marked 9-30
(see Catalog 9001CT9701),
no other markings available.
All dimensions are in millimeters (mm). To convert to approximate inch dimensions, divide mm by 25.4
238
© 1999 - 2000 Schneider Electric All Rights Reserved
11/00
Push Buttons and Operator Interface Specifiers Guide
Class 9003, Type K – Rotary Cam Switch
Description
Type
Description
Number of
Contacts
Shrouds
For K2 . . . . . . . . . . . . . . . . . . . 4
KZ35
8 KZ36
12 KZ37
16 KZ38
20 KZ39
Ring Nut Wrench –
for use with D1 and D2 operators/
handles listed on Page 238.
Type
For large round bezel.
See Page 238 to determine size
of operator.
Holder with blank legend
KZ33
Blank legend only
9001 01 V
Empty holder only
KZ34
Additional legend for 45 x 45 mm bezel operators. See Page 238 to determine size of
operator.
9001Z01
Gasket used with operators/handles
listed on Page 238 to provide IP-65
protection – for panel mounting contact
block
assemblies.
Holder with blank legend
KZ13
Blank legend only
KZ76
Empty holder only
KZ14
Additional legend for 60 x 60 mm bezel operators. See Page 238 to determine size of
operator.
45 x 45 mm
KZ65
60 x 60 mm
KZ66
Holder with blank legend
KZ15
Blank legend only
KZ77
Empty holder only
KZ16
Blank legend plate
bezel inserts
For small square bezel. See Page 238
to determine size of operator.
Holder with blank legend
900101Q
Blank legend only
900101W
Empty holder only
9001Z15
Size
Color
45 x 45
45 x 45
45 x 45
Black
Silver
Yellow
KZ17
KZ18
KZ19
60 x 60
60 x 60
60 x 60
Black
Silver
Yellow
KZ20
KZ21
KZ22
Description
For small round bezel. See
Page 238 to determine size of operator.
Holder with blank legend
900101R
Blank legend only
900101W
Empty holder only
9001Z16
Replacement ring nut for all K style
operators/handles listed on Page 238.
KZ30
Replacement Knobs
for K2 Operators
Handle
Code t
Color
Length
(d)
A
B
C
D
L
M
N
Black
Black
Black
Black
Red
Red
Red
29 mm
34 mm
42 mm
57 mm
34 mm
42 mm
57 mm
Type
KZ26
KZ27
KZ28
KZ29
KZ41
KZ42
KZ43
t Last letter of the “operator/handle” type number is the “handle code.”
Panel Mount
Mounting adapter for use with Chrome KZ127
XB2B Style Handle
Base Mount
Contact Block Assembly Depth
Number
K2 Length
Number
K2 Length
of Contacts
at mm
of Contacts
at mm
1-2
52.5
11-12
102.5
3-4
62.5
13-14
112.5
5-6
72.5
15-16
122.5
7-8
82.5
17-18
132.5
9-10
92.5
19-20
142.5
t Dimension a for the 9003K2 is for 4 hole mounting operator/handle. Add 18 mm to dimension
a when using single hole mount operator/handles.
With Shrouds
mm
K2
b
48
c
26
239
11/00
© 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
Class 9003, Type K – Rotary Cam Switch
Instructions
Explanation Of Example Below
1. Choose the chart below with the switching angle as
determined on the key sheet. This identifies the angular
location and the position numbers for the various positions
of the rotary cam switch. Zero degrees or straight up is
always position 1. Use these position numbers when
completing the target table on page 241.
1. Contact 1-2 is open in all positions but position 2.
2. Contact 3-4 is closed from the 2nd through the 4th position. The
contact does not open while switching from one position to another.
3. Contacts 5-6 and 7-8 overlap between positions 2 and 3.
4. Contact 9-10 is closed in positions 2 and 3. It is open momentarily
while switching between positions 2 and 3.
5. Contact 11-12 closes momentarily when switching from position 2 to
position 3. This contact is not closed in position 2 or position 3.
6. Position 1 is an off position.
2. Terminals on the cam switch have the same numbers as the
terminal numbers on the target table. Contact 1-2 is a
single contact.
POSITIONS
3. WHEN INDICATING A CONTACT CLOSURE, PLACE “X”
WITHIN THE SQUARE AS SHOWN IN THE CONTACT
SEQUENCE EXAMPLE AT RIGHT.
6. Based on the number of contacts, determine the price of the contact
block assembly below. Prices of operators/handles, legend
markings, and any accessories are listed on their respective page(s).
240
© 1999 - 2000 Schneider Electric All Rights Reserved
11/00
Push Buttons and Operator Interface Specifiers Guide
Class 9003, Type K – Rotary Cam Switch
Customer
F.O. NO.
Date
P.O. Number
Qty.
To order custom cam switches:
1. Indicate the contact size at right (9003K2-K9).
2. Indicate desired switching angle at right. If the switching angle is not
indicated, the factory will determine the angle from the recommended column of the table on right.
Switching Angle
Maximum
Number of Positions
See Ordering
Instructions at left
90°
60°
45°
30°
4
6
8
12
2-3
4-5
6-7
8-12
3. Per the example on page 240, fill in target table below.
4. Indicate operator/handle type.
Contact size
5. If operator/handle bezel has legend and legend marking is desired,
indicate legend marking on back of this form.
Switching angle
6. If separate legend is required, indicate legend type on right and
marking on back of this form.
K____________
Class 9003
Type
Operator/Handle type
Class 9003
Type
______________
Separate legend
Class 9003
Type
______________
______________
See page 240 for
Target Table Explanation
Target Table
Positions
1
T
E
R
M
I
N
A
L
S
2
3
4
5
6
7
8
9
10
11
12
1-2
3-4
5-6
7-8
9-10
11-12
13-14
15-16
17-18
19-20
21-22
23-24
25-26
27-28
29-30
31-32
33-34
35-36
37-38
39-40
241
11/00
© 1999 - 2000 Schneider Electric All Rights Reserved
Push Buttons and Operator Interface Specifiers Guide
Class 9003, Type K – Rotary Cam Switch
Standard Markings
Special Markings
The following legend markings are standard for the 45 x 45 mm and
60 x 60 mm bezel operators. To order one of these size bezel operators
with a standard marking, add the code below of the desired marking as
a suffix to the operator type number. Example: 9003 KBC1B 4-3.
All other legend engraving is considered special. To order, clearly
indicate the position of the desired marking. See below for the maximum
characters allowed on a specially engraved legend.
Rectangular Legends
Legend
Size
For Operator
Size
Maximum
# Characters
Per Position
900101Q
900101R
900101W
26 x 19 mm
–
7
900101V
9003KZ33
37 x 22 mm
–
11
9003KZ11
9003KZ13
9003KZ76
42 x 13 mm
45 x 45 mm
12
9003KZ15
9003KZ77
57 x 27 mm
60 x 60 mm
17
30° Marking
01
01
8
765
3-1
Type
2
3
4
01
9
8
3-2
765
2
3
4
01
2
10
9
3
4
8
765
11 0 1
2
10
9
3
4
8
765
3-4
3-5
3-3
12
10
9
876
3-6
3
4
5
12
10
9
3-7
876
3
4
5
12
3
11
10
4
5
9
876
12 1 2
3
11
10
4
5
9
876
3-9
3-10
3-8
45° Marking
4-2
4-3
0
0
0
L1-N
L1-L2
L2-L3
L3-L1
L1-L2
L2-L3
L3-L1
4-11
1
8
7
6
1
HAND
4-23
2
0
1
MIN.
MAX.
0
1
2
4-38
4-43
2
OFF
4-59
1
1
0
4-8
0
L1-L2
L2-L3
L3-L1
1
2
3
4
4-9
2
3
4
5
4-18
L1
2
4-51
1
6
5
4-10
2
3
4
1
7
6
4-19
L2
L3
4-44
0 1
1
2
1.2
4-17
1
2
3
0
2
4-7
2
3
0
4
1
2
3
4-54
5
2
3
4
VOLTMETER
VOLTMETER
AMMETER
4-534
4-535
4-536
L1-L2
L2-L3
L1-L3
0
2
HAND
AUTO
STOP
START
1
4
2
3
L1-L2
L1-N
L1-L2
L1-L2
L2-L3
L2-N
L2-L3
L2-L3
L3-L1
L3-N
L3-L1
L3-L1
6-1
6-2
6-6
6-8
6-11
0
0
0
0
0
1
1
2
2
6-34
0
L2-N
L3-N
4-55
4-56
1
1
0
2
1
2
6-12
3
0
6-30
3
6-31
Type
For Bezel
Size
Legend
Size
Maximum
# Characters
Per Position
KBC1S
KCC1L
KCE1L
45 x 45 mm
42 x 42 mm
3
KZ21
KZ22
KBD1C
KBF1C
KBF2F
KBD1S
KCD1M
KCF1M
KCF2R
60 x 60 mm
57 x 57 mm
5
KZ24
KZ25
KBG2G
KBG2H
KCG2T
KCG2U
90 x 90 mm
87 x 87 mm
6
Black
Silver
Yellow
KZ17
KAC1B
KAE1B
KAC1S
KZ18
KZ19
KBC1B
KBE1B
KZ20
KAD1C
KAF1C
KAF2F
KAD1S
KZ23
KAG2G
KAG2H
L1-N
60° Marking
1
Square Legends
4-20
2
3-
4-58
AUTO
0
3
4-57
7
6
5
4-16
2
L1-L2
L2-L3
L3-L1
AUTO
4
1
4-15
0
AUTO
1
2
3
4-6
2
L1-N
L2-N
L3-N
4-14
0
6
5
3
L1-N
4
4-5
L1-L2
L2-L3
L3-L1
4-34
3
5
1
2
3
1
1
0
4-4
3
2
0
1
2
3
4
4-13
HAND
AUTO
4-21
0
L1-N
L2-N
L3-N
4-12
2
3
4
5
L1-L2
L2-L3
L3-L1
0
1
2
3
OFF 1
4-1
0
1
2
1 2-3 1-2
0
1
OFF 1
0
0
1
2
2
1
6-32
1
0
2
All dimensions in mm. To convert to
approximate inches, divide mm by 25.4.
6-33
2
0
6-35
6-36
6-37
6-38
6-39
90° Marking
0
0
3
0
1
2
9-1
1
START
9-2
2
4
1
START START
9-3
L3
1
L1
L1
L4
L2
4
0
2
L2
L3
3
9-4
9-5
9-6
2
STOP
START
0
L1
1
1
L2
L3
9-7
9-10
9-14
9-30
Positions of engravable locations on blank legends.
Rectangular Legends
Square Legends
t Maximum number of characters for these positions is one (1) less than the listed maximum in the chart above.
242
© 1999 - 2000 Schneider Electric All Rights Reserved
11/00