THE INTELLIGENT FLOOR
THE INTELLIGENT C EILING
WHIP E ND
POWER EXTENDER CABLE
DOUBLE
PORT
FEATURES
§ Rated for use on 120V/208V 20 ampere branch circuits
§ Manufactured with Type MC Cable featuring 90°C insulated, #12
AWG, solid copper conductors
§
§
§
§
§
§
Connector housing is zinc-plated 0.060 inches cold-rolled steel
High conductivity pin and socket connector design
To eliminate inter-voltage connection, each connector is keyed and
color-coded to meet specific voltage requirements
IBEW-assembled, UL-listed and labeled
Meets requirements of NEC Article 604
Acceptable for use in environmental air-handling spaces other than
ducts or plenums per NEC Article 300-22(c)
APPLICATION
The Whip End Power Extender Cable allows the IF/IC modular wiring system to interconnect with hard-wired
assemblies, such as Access Floor Modules, electrical work boxes, or inaccessible areas where wall-mounted
convenience outlets are located. Normally, it delivers power from the Power Extender Cables to the Access Floor
Modules. Cables are configured for General Purpose (GP) power and Isolated Ground (IG) power. Custom circuitry
configurations are available.
ORDERING INFORMATION
Catalog Number
1
E
A
G
/
A
1
0
-W
Whip End Indicator
Length (Feet)
Standard Lengths:
10', 15', 20'
30', 40', 50'
Lower Port Circuitry
A = 1 hot, A
B = 2 hot, A,B
C = 3 hot, A,B,C
Upper Port Circuitry
AG/ = 1 hot, A,IG
BG/ = 2 hot, A,B,IG
Function
E = Extender Cable
Voltage
1=
120/208/240 V
2505 Merritt Drive, Garland, TX 75041
972-278-3888 fax: 972-248-8585 www.afcweb.com/acs
Made in the USA
THE INTELLIGENT FLOOR
THE INTELLIGENT C EILING
DOUBLE
PORT
WHIP E ND
POWER EXTENDER CABLE
SPECIFICATIONS
Weight
Length
Minimum Coil Diameter
Cable
• Type
• Conductor
• Conductor Size
• Ground Conductor
Contact
• Material
Contact Housing
• Material
• Keying
KEY DIMENSIONS
10 pounds (10’ length)
Unrestricted by NEC
9 inches (inner diameter)
•
•
•
•
MC
Copper, solid, 90°C, THHN
12 AWG
12 AWG, copper, solid
• 0.016” copper alloy
Connector Housing
• Material
• Finish
• Attaching Hardware
Latch
• Material
Latch Strike
• Material
• Plating
• 0.060” cold-rolled steel
• Bright zinc dip
• Rivet, steel, zinc plated
• #3 zinc alloy, die cast
• 0.028 AISI 1075 cold-rolled
spring steel
• Black oxide
• Polycarbonate
• Complies with NEC 604-6(b)
PIN ASSIGNMENTS
SYSTEM VIEW
2505 Merritt Drive, Garland, TX 75041
972-278-3888 fax: 972-248-8585 www.afcweb.com/acs
Made in the USA