Forecast 3
FORUM
The Forecast series by FORUM
is a line of hybrid steel housing/
aluminum trim rectilinear recessed
luminaires.
JOB
TYPE
PRODUCT
Forecast
3 is a 2 1/2” wide
DESCRIPTION
RECESSED/
DIRECT
IN-WALL/
HORIZONTAL
housing with a 2” aperture. Multiple
ceiling configurations are available
including various
ceiling types
Arialgrid
font
as well as overlap and flange free
Size 9 or larger
sheetrock.
IN-WALL/
VERTICAL
PRODUCT IMAGE
Forecast 3 can be lamped with
T5 lamps as well as LED.
ORDERING CODE
SRT 43
Series
Trim
Lamping
Shielding
Length
Forecast3 - 4”x3”
recessed steel/
aluminum hybrid
FG = 9/16” grid
TG = 15/16” grid
BG = slot grid
F = 1/2” flange
FF = flange-free
1T5 = 1T5
1T5S = 1T5 STAG
1T5H = 1T5 HO
1T5HS = 1T5 HO
STAG
SAT = Satin lens
120V
2 = 2’
EC = Emergency Circuit
WH = White
3 = 3’
AZ = Anodized EM1 = 550 Lumen battery pk
277V
4 = 4’
Silver
UNV = Universal
EM2 = 1100 Lumen battery pk
5 = 5’
CC = Custom
DIM = Dimming **
6 = 6’
Color *
F = Fusing
7 = 7’
SW = Separate Switch
8 = 8’
OC = Occupancy Sensor
XX = Specify
run length
P = Perimeter Mounting
in even
foot
* Please provide
increments
custom color RAL # ________________________________
WOL = White Opal lens
PB = Parabolic Baffle
SPB = Specular
Parabolic Baffle
WPB = White Parabolic
sheetrock
Baffle
WP = White Opal over
Parabolic Baffle
SAP = Satin Lens over
Parabolic Baffle
Voltage
Finish
Option 1
Option 2
** Please specify dimming
manufacturer/model (if required) ______________________
TECHNICAL DRAWINGS
* Dimensions provided as general information. Please see shop drawings for specific rough in dimension
2.473 "
FG
9/16” Grid
0.634 "
3.569 "
(T8 + 1.0")
BG - Bolt Slot Grid
F - Overlap Flange
(drywall, wood, metal applications)
TG
FF - Flange Free
15/16” Grid
(seamless drywall application)
1.967 "
SPECIFICATION
3.175 "
* Forum reserves the right to change this information at any time
HOUSING: 18 GA cold rolled steel in a pre-paint
TRIM/FLANGE: Extruded Aluminum trim
BALLAST: Electronic, high power factor, low
GEARTRAY / REFLECTOR: Integrated geartray
and reflector made from 20 GA cold rolled steel in
a pre-paint white finish. Fully wired unit remains
completely accessible from below via ballast panel.
SHIELDING: Satin frosted and white opal
LISTING: All fixtures bare an AFL-CIO/IBEW
white finish. Built in individual pieces up to 8 ft in
length. Sections can be joined to form continuous
runs.
is run around all 4 sides of the fixture body.
Provides a clean and precise finish and is
available for a number of ceiling applications.
lenses are snap in. Parabolic baffles are
made from high quality aluminum and come
in a variety of finishes.
THD, ballast used. 120V, 277V, and Universal
Voltage available standard. Please consult
factory for special ballast requirements.
union label and are UL listed for recessed dry
location. For alternative location configurations,
please consult factory.
Forum, Inc. - 908 Old Freeport Rd. - Pittsburgh, Pennsylvania 15238 - T: (412) 781-5970 F: (412) 781-5971 - www.forumlighting.com
Forecast 3
FORUM
The Forecast series by FORUM
is a line of hybrid steel housing/
aluminum trim rectilinear recessed
luminaires.
JOB
TYPE
PRODUCT
Forecast
3REC is a 2 1/2” wide
DESCRIPTION
RECESSED/
DIRECT
housing with a 1 5/8” aperture,
regressed 1 1/8”. Multiple ceiling
configurations
are available
Arial
font
including various grid ceiling types
Size 9 or larger
and sheetrock applications.
PRODUCT IMAGE
Forecast 3REC can be lamped
with T5 lamps as well as LED.
ORDERING CODE
SRT 43REC
Series
Trim
Lamping
Shielding
Length
Forecast4REC
4”x3” recessed
steel/aluminum
hybrid w/ regressed
lens
FG = 9/16” grid
TG = 15/16” grid
BG = slot grid
F = 1/2” flange
FF = flange-free
1T5 = 1T5
1T5S = 1T5 STAG
1T5H = 1T5 HO
1T5HS = 1T5 HO
STAG
SAT = Satin lens
WH = White
EC = Emergency Circuit
120V
2 = 2’
3 = 3’
AZ = Anodized EM1 = 550 Lumen battery pk
277V
4 = 4’
Silver
UNV = Universal
EM2 = 1100 Lumen battery pk
5 = 5’
CC = Custom
DIM = Dimming **
6 = 6’
Color *
F = Fusing
7 = 7’
SW = Separate Switch
8 = 8’
OC = Occupancy Sensor
XX = Specify
run length
P = Perimeter Mounting
in even
foot
* Please provide
increments
custom color RAL # ________________________________
WOL = White Opal lens
sheetrock
Voltage
Finish
Option 1
Option 2
** Please specify dimming
manufacturer/model (if required) ______________________
TECHNICAL DRAWINGS
* Dimensions provided as general information. Please see shop drawings for specific rough in dimension
2.473 "
1.632 "
FG
9/16” Grid
4.819 "
(T8 + 1.0")
TG
15/16” Grid
1.170
BG - Bolt Slot Grid
SPECIFICATION
F - Overlap Flange
FF - Flange Free
(drywall, wood, metal applications)
(seamless drywall application)
* Forum reserves the right to change this information at any time
2.313 "
3.563 "
HOUSING: 18 GA cold rolled steel in a pre-paint
TRIM/FLANGE: Extruded Aluminum trim
BALLAST: Electronic, high power factor, low
GEARTRAY / REFLECTOR: Integrated geartray
and reflector made from 20 GA cold rolled steel in
a pre-paint white finish. Fully wired unit remains
completely accessible from below via ballast panel.
SHIELDING: Satin frosted and white opal
LISTING: All fixtures bare an AFL-CIO/IBEW
white finish. Built in individual pieces up to 8 ft in
length. Sections can be joined to form continuous
runs.
is run around all 4 sides of the fixture body.
Provides a clean and precise finish and is
available for a number of ceiling applications.
lenses are available. They are of a lift-andshift nature. They have a stepped side profile
for a secure fit.
THD, ballast used. 120V, 277V, and Universal
Voltage available standard. Please consult
factory for special ballast requirements.
union label and are UL listed for recessed dry
location. For alternative location configurations,
please consult factory.
Forum, Inc. - 908 Old Freeport Rd. - Pittsburgh, Pennsylvania 15238 - T: (412) 781-5970 F: (412) 781-5971 - www.forumlighting.com