Organic coated steel
Construction
Granite® HD
T E C H N I C A L D ATA S H E E T
Properties
Thermosetting paint
Applications
External uses: construction (cladding, roofing and accessories)
Description
Thickness
Usual:
Composition
Front:
5 microns of primer
+ 20 microns of topcoat
Back:
5 to 12 microns
Double side finishing available
Gloss (Gardner 60°)
20 to 50 GU
Colours
Complete range including metallic
Special colours on request
Appearance
Smooth, grained
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive (please consult us)
Adhesion of the coating
≤ 0.5 T
Resistance to cracking on bending
≤2T
Impact resistance
Very good
Surface “pencil” hardness
F to H
Salt spray test
500 hours
Condensation resistance
1000 hours
Resistance to accelerated weathering
Gloss retention ≥ 50% - ∆E ≤ 1.5
Temperature resistance
Maximum 80°C
Fire resistance
France: CSTB M0
UK: BS 476 part 3 EXT.S.AA, part 6 I = 0, part 7 Class 1
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Very good
Low
Good to very good
Resistance to mineral oils
Very good
25 microns
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO2– 8-2005
Performances
• Good UV resistance
• Good corrosion resistance
• Good formability
Organic coated steel
Construction
Granite® HDS
T E C H N I C A L D ATA S H E E T
Properties
Thermosetting paint
Applications
External uses: construction (cladding, roofing and accessories)
Description
Thickness
Usual:
Composition
Front:
5 or 15 microns of primer
+ 20 microns of topcoat
Back:
5 to 12 microns or a minimum of
12 microns in two layers, according to
the thickness of the primer
on the top side
Double side finishing available
Gloss (Gardner 60°)
20 to 50 GU
Colours
Complete range including metallic and pearly
Special colours on request
Appearance
Smooth
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive (please consult us)
Adhesion of the coating
≤ 0.5 T
Resistance to cracking on bending
≤ 1.5 T
Impact resistance
Very good
Surface “pencil” hardness
F to H
Salt spray test
500 to 700 hours
Condensation resistance
1500 hours
Resistance to accelerated weathering
Gloss retention ≥ 80% - ∆E ≤ 1.2
Temperature resistance
Maximum 80°C
Fire resistance
France: CSTB M0
UK: BS 476 part 3 EXT.S.AA, part 6 I = 0, part 7 Class 1
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Very good
Low
Good to very good
Resistance to mineral oils
Very good
35 microns
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO3– 8-2005
Performances
• Very good UV resistance
• Very good corrosion resistance
• Very good formability
Organic coated steel
Construction
Granite® HDX
T E C H N I C A L D ATA S H E E T
Thermosetting paint
Applications
External uses, severe environment: profiles, sandwich panels for roofing and cladding,
equipments for buildings (tiles, guttering etc.)
Description
Thickness
Usual:
50 to 60 microns
Composition
Front:
Back:
50 to 60 microns (primer + topcoat)
minimum 12 microns in two layers
Gloss (Gardner 60°)
30 to 50 GU
Colours
Complete range including metallic
Special colours on request
Appearance
Grained
Temporary protection (optional)
Please consult us.
Adhesion of the coating
≤ 0.5 T
Resistance to cracking on bending
≤ 1.5 T
Impact resistance
Very good
Surface “pencil” hardness
F to H
Salt spray test
1000 hours
Condensation resistance
1500 hours
Resistance to accelerated weathering
Gloss retention ≥ 80% - ∆E ≤ 1.2
Temperature resistance
Maximum 80°C
Fire resistance
France: CSTB M0
UK: BS 476 part 3 EXT.S.AA, part 6 I = 0, part 7 Class 1
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Very good
Low
Good to very good
Resistance to mineral oils
Very good
Performances
•
•
•
•
Very good UV resistance
Excellent corrosion resistance
Very good formability
Thick and solid system without PVC
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Grained texture cannot be reconstituted by repainting.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO4– 8-2005
Properties
Organic coated steel
Construction
Granite® Farm
T E C H N I C A L D ATA S H E E T
Thermosetting paint
•
•
•
•
Good UV resistance
Very good corrosion resistance
Good formability
Excellent chemical resistance
Applications
External uses: cladding, roofing and accessories for farm buildings
Description
Thickness
Usual:
25 to 35 microns / front side
35 microns / back side
Composition
Front:
5 microns of primer
+ 20 microns of topcoat
15 microns of primer
+ 20 microns of topcoat
Back:
Performances
Gloss (Gardner 60°)
30 GU
Colours
Complete range
Special colours on request
Appearance
Smooth
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive (please consult us)
Adhesion of the coating
≤1T
Resistance to cracking on bending
≤2T
Impact resistance
Very good
Surface “pencil” hardness
F to H
Salt spray test
500 hours on Z 275 or equivalent
Condensation resistance
1500 hours
Resistance to accelerated weathering
Gloss retention ≥ 50% - ∆E ≤ 1.5
Temperature resistance
Maximum 80°C
Fire resistance
France: CSTB M0
UK: BS 476 part 3 EXT.S.AA, part 6 I = 0, part 7 Class 1
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Front side
Very good
Low
Good to very good
Resistance to mineral oils
Very good
Back side
Very good
Very good
Very good
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO5– 8-2005
Properties
Organic coated steel
Construction / General industry
Polyester
T E C H N I C A L D ATA S H E E T
Properties
Thermosetting paint
Applications
Basic coating for inside and outside application
(cladding, roofing and accessories, air conditioners, presentation racks, radiators, casings etc.)
Description
Thickness
Usual:
Composition
Front:
5 microns of primer
+ 20 microns of topcoat
Back:
5 to 12 microns
Double side finishing available
Gloss (Gardner 60°)
20 to 80 GU
Colours
Complete range excluding metallic
Special colours on request
Appearance
Smooth, orange peel effect
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive (please consult us)
Adhesion of the coating
≤1T
Resistance to cracking on bending
≤3T
Impact resistance
Very good
Surface “pencil” hardness
F to H
Salt spray test
150 to 500 hours depending on the substrate
Condensation resistance
500 to 1000 hours
Resistance to accelerated weathering
Gloss retention ≥ 30%
Fire resistance
France: CSTB M0
Resistance to acids and bases
Good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Very good
Low
Good to very good
Resistance to mineral oils
Very good
25 microns
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO6– 8-2005
Performances
• Good corrosion resistance
• Good formability
• Basic coating for inside and outside application
Organic coated steel
Domestic appliances / Construction
Estetic® Bio
T E C H N I C A L D ATA S H E E T
Properties
Thermosetting paint
• Good formability
• Good corrosion resistance
• Good antibacterial properties
Applications
Refrigerators (doors, side panels), chest freezer (walls, top cover), air-conditioning housing etc
Inside building panels
Description
Thickness
Usual:
25 microns
Composition
Front:
5 microns of primer
+ 20 microns of topcoat
5 to 10 microns
Performances
Gloss (Gardner 60°)
Usual:
20 to 40 GU or 65 to 95 GU
depending on final use
Colours
Complete range
Special colours on request
Appearance
Smooth, orange peel effect
Temporary protection (optional)
Please consult us.
Adhesion of the coating
≤1T
Resistance to cracking on bending
≤3T
Impact resistance
Very good
Surface “pencil” hardness
HB to H
Salt spray test
96 to 500 hours depending on the substrate
KTW cyclic test
Good
Resistance to accelerated weathering
Good to very good
Resistance to bacteria
Good (Microbac LTD certificate on request)
Household products resistance
Good
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Good to very good
Low
Good to very good
Resistance to mineral oils
Very good
Paint touch up
Touch up can be made using a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO7– 8-2005
Back:
Organic coated steel
Construction
PVDF
T E C H N I C A L D ATA S H E E T
Properties
Thermoplastic paint
Applications
External uses: architectural building
Description
Thickness
Usual:
Composition
Front:
5 to 15 microns of primer
+ 20 microns of topcoat
Back:
5 to 12 microns
Double side finishing available
Gloss (Gardner 60°)
20 to 30 GU
Colours
Special PVDF colour chart
Appearance
Smooth
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive recommended
(please consult us)
Adhesion of the coating
≤1T
Resistance to cracking on bending
≤3T
Impact resistance
Very good
Surface “pencil” hardness
F to H
Taber abrasion resistance
20 to 30 mg
Salt spray test
500 to 700 hours
Condensation resistance
1000 hours
Resistance to accelerated weathering
Gloss retention ≥ 80% - ∆E ≤ 1.2
Temperature resistance
Maximum 90°C
Fire resistance
France: CSTB M0
Resistance to acids and bases
Very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Excellent
Very good
Very good
Resistance to mineral oils
Excellent
25 microns
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO8– 8-2005
Performances
• Excellent colour and appearance stability
• Good corrosion resistance
• Excellent chemical resistance
Organic coated steel
Construction
Plastisol
T E C H N I C A L D ATA S H E E T
Properties
Thermoplastic paint
Applications
External uses: construction (cladding, roofing and accessories), cooling rooms, urban furniture
Internal uses: shelving units, partitions, metallic furniture
Description
Thickness
Usual:
Composition
Front:
7 microns of primer
+ 100 up to 200 microns
of finishing by steps of 25 microns
Back:
5 to 25 microns
Double side finishing available
(back 100 to 200 microns by steps of 25 microns smooth
industrial appearance)
Gloss (Gardner 60°)
30 to 50 GU
Colours
Complete range
Special colours on request
Appearance
Smooth or embossed (linen, leather, granite)
according to the thicknesses (please consult us)
Adhesion of the coating
≤1T
Resistance to cracking on bending
≤3T
Impact resistance
Very good
Surface “pencil” hardness
4 to 6B
Clemen scratch resistance
≥ 3.5 kg
Taber abrasion resistance
20 to 30 mg
Salt spray test
1000 hours
Temperature resistance
Maximum 75°C
Fire resistance
France: CSTB M1 (100 microns), M2 (200 microns)
UK: Class 1 according to BS 476: part 7
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Very good
Low
Low
Resistance to mineral oils
Very good
100 to 200 microns
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Embossing cannot, however, be reconstituted by repainting.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO9– 8-2005
Performances
• Very good corrosion resistance
• Very good formability
• Excellent abrasion resistance
Organic coated steel
Construction / General industry
Skinplate®
T E C H N I C A L D ATA S H E E T
Properties
Thermoplastic films
Applications
External uses: construction (waterproofing layers for roofs, garage doors, accessories)
Internal uses: shelving units, metallic furniture, ceilings, lifts, cooling rooms, freezers,
audio/video housings, etc.
Description
Thickness
Usual:
Composition
Front:
8 microns of adhesive
+ 100 up to 900 microns
of thermoplastic film
Back:
7 to 20 microns
Note: double side finishing film is not available
Gloss (Gardner 60°)
10 to 80 GU
Colours
Complete range including metallic
Special colours on request
Appearance
Grained, wood, textile, printed, leather or smooth
according to the type of film (please consult us)
Temporary protection (optional)
Some types of film can be protected with a strippable film.
(please consult us)
Adhesion of the coating
≤1T
Resistance to cracking on bending
≤2T
Impact resistance
Very good
Surface “pencil” hardness
4 to 6B
Clemen scratch resistance
≥ 3.5 kg
Taber abrasion resistance
20 to 30 mg
Salt spray test
240 hours minimum
Temperature resistance
Maximum 60°C
Fire resistance
France: M2 minimum
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Very good
Low
Low
Resistance to mineral oils
Very good
Wide range of films, colours and designs
Aesthetically pleasing
Very good formability
Excellent resistance to abrasion
Fire-resistance according to CSTB
100 microns up to 900 microns
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Appearance designs cannot, however, be reconstituted by repainting.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO10– 8-2005
Performances
•
•
•
•
•
Organic coated steel
Domestic appliances
Estetic® Cold
T E C H N I C A L D ATA S H E E T
Thermosetting paint
Applications
“Cold” domestic appliances: refrigerator (doors, side panels), chest freezer (walls, top covers,
side panels), air conditioning housings, small domestic appliances etc.
Description
Thickness
Usual:
25 microns
Composition
Front:
Back:
5 microns of primer
+ 20 microns of topcoat
5 to 10 microns
Gloss (Gardner 60°)
Usual:
65 to 95 GU
Colours
Complete range
Special colours on request
Appearance
Smooth, grained, orange peel effect
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive (please consult us)
Adhesion of the coating
0T
Resistance to cracking on bending
0.5 to 2 T
Impact resistance
Very good
Surface “pencil” hardness
HB to F
Salt spray test
96 to 240 hours depending on the substrate
KTW cyclic test
Excellent
Household products resistance
Good
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Good to very good
Low
Good to very good
Resistance to mineral oils
Very good
Performances
• High gloss
• Very good formability
• Good staining resistance
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO11– 8-2005
Properties
Organic coated steel
steels
Domestic Appliances
appliances
Estetic® Hot
T E C H N I C A L D ATA S H E E T
Properties
Thermosetting paint
Applications
“Hot” domestic appliances: cookers (covers, side panels, doors), ovens (doors, side panels),
microwave ovens, burner and boiler housings, small appliances etc.
Description
Thickness
Usual:
Composition
Front:
5 microns of primer
+ 20 microns of topcoat
Back:
5 microns of primer or 3 microns
of primer + 8 microns of backing
Double side finishing available
Gloss (Gardner 60°)
Usual:
Colours
Complete range
Special colours on request
Appearance
Smooth, orange peel effect
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive (please consult us)
Adhesion of the coating
0T
Resistance to cracking on bending
0 to 2 T
Impact resistance
Very good
Surface “pencil” hardness
B to H
Salt spray test
120 to 240 hours depending on the substrate
Temperature resistance
Standard product: 120°C (continuous), 200°C (maximum)
Special product: 24 hours at 200°C
Household products resistance
Good
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Good to very good
Low
Good to very good
Resistance to mineral oils
Very good
High gloss
Very good formability
Good staining resistance
Good heat resistance
25 microns
30 to 90 GU
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO12– 8-2005
Performances
•
•
•
•
Organic coated steel
steels
Domestic Appliances
appliances
Estetic® Wet
T E C H N I C A L D ATA S H E E T
Thermosetting paint
Applications
“Wet” domestic appliances: washing machines, dryers, tumble dryers, dish washers,
small appliances etc.
Description
Thickness
Usual:
25 microns
Composition
Front:
Back:
5 to 10 microns of primer
+ 20 microns of topcoat
5 to 10 microns
Gloss (Gardner 60°)
Usual:
65 to 95 GU
Colours
Complete range
Special colours on request
Appearance
Smooth, orange peel effect
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive (please consult us)
Adhesion of the coating
0T
Resistance to cracking on bending
1 to 2 T
Impact resistance
Very good
Surface “pencil” hardness
HB to H
Salt spray test
240 hours
KTW cyclic test
Excellent
Temperature resistance
Maximum 90°C
Resistance to detergent
Very good with liquid and powder detergent
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Good to very good
Low
Good to very good
Resistance to mineral oils
Very good
Performances
• High gloss
• Very good formability
• Good detergent resistance
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO13– 8-2005
Properties
Organic coated steel
steels
Domestic appliances
Appliances / General industry
Industry
Estetic® Bright
T E C H N I C A L D ATA S H E E T
Colaminated coating
(PET films + paint)
Applications
Internal use: domestic appliances (doors & side panels for refrigerators, washing machines,
microwave ovens etc.), general industry (vending machines, heating equipments)
Description
Thickness
Usual:
40 microns
Composition
Front:
Back:
3 layers (primer, basecoat and PET film)
5 microns
Gloss (Gardner 60°)
Usual:
> 100 GU
Colours
Complete range: white, metallic, bright colours etc.
Special colours on request
Appearance
Smooth, orange peel effect
Adhesion of the coating
0T
Resistance to cracking on bending
0T
Impact resistance
Very good
Surface “pencil” hardness
H to 2H
Clemen scratch resistance
> 4 kg
Salt spray test
240 hours (with Z 100 substrate or equivalent)
KTW cyclic test
Good
Resistance to accelerated weathering
Very good
Temperature resistance
100°C (continuous), 200°C (maximum)
Household products resistance
Good
Food safety
Food suitable (upon request)
Resistance to acids and bases
Very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Very good
Very good
Very good
Resistance to mineral oils
Very good
Performances
Remarks
•
•
•
•
•
•
Very high gloss
Excellent formability
Scratch resistant
High chemical resistance
Food suitable (upon request)
Good resistance to: dirt stain, detergent, cleaners etc.
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO14– 8-2005
Properties
Organic coated steel
Construction
Estetic® Lighting
T E C H N I C A L D ATA S H E E T
Properties
Thermosetting paint
Applications
Internal use: lighting
Description
Thickness
Usual:
Composition
Front:
5 or 15 microns of primer
+ 20 microns of topcoat
Back:
5 microns
Double side finishing available
Gloss (Gardner 60°)
Usual:
Light reflection (Y)
> 83% or > 86% upon request
Colours
Usual:
Appearance
Smooth
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive (please consult us)
Adhesion of the coating
0T
Resistance to cracking on bending
≤2T
Impact resistance
Very good
Surface “pencil” hardness
B to F
Clemen scratch resistance
> 2 kg
Salt spray test
150 to 240 hours (depending on substrate)
KTW cyclic test
Good
Resistance to accelerated weathering
240 hours of UVA, with a colour change ∆E ≤ 1.2
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Good to very good
Low
Very good
Resistance to mineral oils
Very good
25 microns
50 to 80 GU
white
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO16– 8-2005
Performances
• High gloss and light reflectivity
• Good formability
Organic coated steel
steels
Domestic Appliances
appliances
Estetic® High Tech
T E C H N I C A L D ATA S H E E T
Properties
Thermosetting paint
Applications
Internal use: consumer electronics, hifi, computers, teletronics etc.
Description
Thickness
Usual:
Composition
Front:
5 to 15 microns of primer
+ 20 microns of topcoat
Back:
5 to 10 microns,
conductive back coat available
(for double side finishing, please consult us)
Gloss (Gardner 60°)
≤ 10 GU
Colours
Wide range of colours
Appearance
Wide range of appearances and textures
Temporary protection (optional)
Please consult us.
Adhesion of the coating
≤ 0.5 T
Resistance to cracking on bending
1T
Impact resistance
Very good
Surface “pencil” hardness
F to H
Taber abrasion resistance
20 to 30 mg
Salt spray test
200 hours on Z 100 or equivalent
Temperature resistance
Maximum 90°C
Resistance to acids and bases
Good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Good to very good
Low
Very good
Resistance to mineral oils
Very good
25 microns
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO17– 8-2005
Performances
• Internal use
• Low gloss finish
• Textured appearance
Organic coated steel
Construction
Estetic® Ceiling
T E C H N I C A L D ATA S H E E T
Properties
Thermosetting paint
Applications
Internal use: metal ceilings (capping, ceiling tiles, perforated panels, accessories etc.), internal panels,
doors
Description
Thickness
Usual:
Composition
Front:
5 microns of primer
+ 20 microns of topcoat
Back:
5 to 12 microns
Double side finishing available
Gloss (Gardner 60°)
Usual:
Possible:
Colours
Complete range including metallic
Special colours on request
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive (please consult us)
Adhesion of the coating
≤1T
Resistance to cracking on bending
1 to 3 T
Impact resistance
Very good
Surface “pencil” hardness
HB to H
Clemen scratch resistance
> 2 kg
Taber abrasion resistance
30 to 50 mg
Salt spray test
240 hours minimum on Z 100 or equivalent
Temperature resistance
Maximum 80°C
Resistance to acids and bases
Good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Good to very good
Low
Good
Resistance to mineral oils
Very good
Good resistance to yellowing and nicotine
Good formability
Easy to clean
Excellent resistance to metal marking
25 or 22 microns (metallic)
12 to 15 GU
8 to 50 GU
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO18– 8-2005
Performances
•
•
•
•
Organic coated steel
steels
General industry
Industry
Estetic® White board
T E C H N I C A L D ATA S H E E T
Thermosetting paint
• High gloss finish
• Suitable with “dry”marker pens
Applications
White boards
Description
Thickness
Usual:
25 microns
Composition
Front:
5 microns of primer
+ 20 microns of topcoat
5 to 12 microns
Back:
Performances
Gloss (Gardner 60°)
80 to 90 GU
Colours
White
Appearance
Smooth
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive (please consult us)
Adhesion of the coating
≤ 2.5 T
Impact resistance
Good
Surface “pencil” hardness
2H
Salt spray test
120 hours on Z 100 or equivalent
Temperature resistance
Maximum 90°C
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Very good
Low
Very good
Resistance to mineral oils
Very good
Cleaning recommendation
Use special markers for easy cleaning. Do not use solvents for cleaning. (please consult us)
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO19– 8-2005
Properties
Organic coated steel
Construction / General industry
Estetic® Flex
T E C H N I C A L D ATA S H E E T
Properties
Thermosetting paint
Applications
Internal building and general industry applications which require high flexibility:
boiler casings, calendered parts, roll blinds, presentations racks etc.
Description
Thickness
Usual:
Composition
Front:
5 microns of primer
+ 20 microns of topcoat
Back:
5 to 12 microns
Double side finishing available
Gloss (Gardner 60°)
Usual:
Colours
Complete range
Special colours on request
Appearance
Smooth, grained
Temporary protection (optional)
Strippable polyethylene film
with or without adhesive (please consult us)
Adhesion of the coating
0T
Resistance to cracking on bending
0.5 to 1.5 T depending on the substrate
Impact resistance
Very good
Surface “pencil” hardness
B to H
Salt spray test
150 to 360 hours depending on the substrate
Condensation resistance
1000 hours
Temperature resistance
Maximum 90°C
Resistance to acids and bases
Good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Good to very good
Low
Good
Resistance to mineral oils
Very good
25 microns
30 to 80 GU
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO20– 8-2005
Performances
• Very good formability
• Large range of appearance
Organic coated steel
Construction / General industry / Domestic appliances
Estetic® Tex
T E C H N I C A L D ATA S H E E T
Thermosetting paint
Applications
Internal use: metal furniture, shelves and shelving units, body shells of appliance, air conditioners,
radiators, casings etc.
Description
Thickness
Usual:
35 microns
Composition
Front:
Back:
20 microns of coloured basecoat
+ 15 microns of textured varnish
5 to 12 microns
Gloss (Gardner 60°)
Usual:
60 GU
Colours
Complete range
Special colours on request
Appearance
Textured
Temporary protection (optional)
Please consult us.
Adhesion of the coating
≤1T
Resistance to cracking on bending
≤3T
Impact resistance
Very good
Surface “pencil” hardness
2H to 3H
Taber abrasion resistance
20 to 30 mg
Salt spray test
150 to 250 hours depending on the substrate
Temperature resistance
Maximum 90°C
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Very good
Low
Good
Resistance to mineral oils
Very good
Performances
• Good formability
• Very good surface hardness
Paint touch up
Touch up as required with a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO21– 8-2005
Properties
Organic coated steel
General industry
Estetic® Tex Plus
T E C H N I C A L D ATA S H E E T
Thermosetting paint
Applications
Uses of textured product with reinforced corrosion properties such as:
electrical cabinets, air conditioners, urban furnishings etc
Description
Thickness
Usual:
35 microns
Composition
Front:
Back:
20 microns of coloured basecoat
+ 15 microns of textured varnish
5 to 12 microns
Gloss (Gardner 60°)
Usual:
50 GU
Colours
Complete range
Special colours on request
Appearance
Textured
Temporary protection (optional)
Please consult us.
Adhesion of the coating
≤ 0.5 T
Resistance to cracking on bending
≤1T
Impact resistance
Very good
Surface “pencil” hardness
2H to 3H
Clemen scratch resistance
≥ 3 kg
Taber abrasion resistance
20 to 30 mg
Salt spray test
360 to 500 hours on Z225 minimum
Condensation resistance
1000 hours
Temperature resistance
Maximum 90°C
Resistance to acids and bases
Good to very good
Resistance to solvents:
• aliphatics and alcohols
• ketones
• aromatics
Very good
Low
Good
Resistance to mineral oils
Very good
Performances
• Very good compromise hardness/flexibility
• Very good formability
• Good corrosion resistance
Paint touch up
Touch up can be made using a brush, a spraygun or an aerosol.
Remarks
The performances indicated are averages and may vary in particular according to the type of substrate used.
These data are not contractual and may be amended in line with technological progress related to the product.
www.fcs.arcelor.com - fcs.technical.assistance@arcelor.com – TD-OCO22– 8-2005
Properties