SECTION 1 EX LIGHTING
EXPLOSION PROOF WELL GLASS LUMINAIRE
UP to 200 Watt (Exd) ZONE 1
�
Features
• The GL 10 series luminaire is a well glass light fitting without control gear suitable
for hazardous area Group II Zone 1 & 2. It can be fitted with lamps up to 200 watt
incandescent, 160 watt self ballasted Mercury Vapour and SL type fluorescent
up to 25 watt
• Stainless steel hardware
• Ribbed body for added strength and better cooling of the light fitting
• One piece silicon gasket for water tight seals
• Variety of mounting arrangements
• Choice of reflectors in polyester
• Toughened and tempered heat resistant glass
�
Specifications
Govan
GL10 Well glass
Classification
Group IIII, Zone 1 & 2, Exd
Gas group IIIIA & IIIIB
Ambient temperatur
e
temperature
Appr
oval
Approval
Lamp holder
AUS Ex 1491 to AS 2380-2 (IEC 79-1)
Porcelain ES or BC
Degr
ee of pr
otection
Degree
protection
Terminals
-20 °C to 50 °C
IP 66
Insulated connectors up to 4 sq mm
Housing material
W eight
Marine grade corrosion resistant
aluminium alloy or cast stainless steel
grade 316
Aluminium alloy - 7 kg
Stainless steel - 15.5 kg
Dif
fuser
Diffuser
Cable entry
Impact resistant toughened glass
Standard 2 x M20
Reflector
Standar
d finish
Standard
Polyester
RAL7032 for aluminium alloy fitting
Stainless steel - unpainted
Rated voltage
220-250 V ±10 %, 50 Hz
�
Options
1. Luminaire housing from cast stainless steel grade 316.
2. Other voltages and frequencies available.
3. Two coat epoxy paint finish.
4. Other cable entries available as requested.
�
Accessories
1. Variety of reflectors.
2. Wire guard for glass globe.
3. Cast aluminium guard.
2 -1.4
1-4
GL10 with polyester dome rreflector
eflector
SECTION 1 EX LIGHTING
EXPLOSION PROOF WELL GLASS LUMINAIRE (Exd)
�
Ordering Information
Temp.
Ceiling Mount
Pendant Mount
Wall Mount
Watts
Rating
Cat.No.
Cat.No.
Cat.No.
Cat.No.
Incandescent
75
T5
100
T5
GL10N07P
GL10N10P
GL10N07W
GL10N10W
GL10N07A
W
GL10N07AW
Incandescent
GL10N07C
GL10N010C
Incandescent
150
T5
GL10N015C
GL10N15P
GL10N15W
GL10N15A
W
GL10N15AW
Incandescent
200
T4
GL10N020C
GL10N20P
GL10N20W
GL10N20A
W
GL10N20AW
Self ballasted mercury
100
T5
160
T4
GL10M10P
GL10M16P
GL10M10W
GL10M16W
GL10M10A
W
GL10M10AW
Self ballasted mercury
GL10M10C
GL10M16C
Fluorescent SL
18
T6
GL10F18C
GL10F18P
GL10F18W
GL10F18A
W
GL10F18AW
Fluorescent SL
23
T6
GL10F23C
GL10F23P
GL10F23W
GL10F23A
W
GL10F23AW
Lamp TType
ype
�
Notes
15° W
all Mount
Wall
GL10N10A
W
GL10N10AW
GL10M16A
W
GL10M16AW
Dimensions (mm)
�
2. Please specify voltage, frequency, lamp holder and cable entry size when ordering.
3. Optional accessories
A.
B.
C.
D.
Wire guard - Code 1.
Cast aluminium guard - Code 3.
Polyester 30° angle reflector - Code A.
Polyester dome reflector - Code D.
Ceiling Mounting
4. Add “S” after the catalogue number for cast stainless steel fitting.
Typical example of or
dering
ordering
Govan
1. The above catalogue numbers do not include lamps.
GL10N20C-A1
GL10M16P-D3
GL10F25W-B-S- (Stainless steel)
�
Intensity distribution curves
Pendant Mounting
(Principal Planes)
GL10 Incandescent floodlight with white 30°
polyester dome reflector.
200 w clear incandescent lamp.
Beam efficiency
Beam type
�
56%
Wide/NEMA 7 h x 7 h
Intensity distribution curves
Wall Mounting
(Polar Curves)
GL10 N20 Incandescent fitting with glass dome
lens/polyester dome reflector.
200 w incandescent lamp.
LOR
71%
Peak intensity @ 21°
263 cd/1000 lm
15° W
all Mounting
Wall
1-5
2 -1.5
SECTION 1 EX LIGHTING
EXPLOSION PROOF WELL GLASS LUMINAIRE
UP to 400 Watt (Exd) ZONE 1
�
Features
• The GL4 series luminaire is a high intensity discharge (H.I.D.) well glass
fitting suitable for hazardous area Group II Zone 1 & 2. It can be fitted with lamps
up to 400 watt high pressure Sodium, Mercury Vapour and Metal Halide
• Integral control gear
• Stainless steel hardware
• Hinged cover allows ease for servicing and relamping
• One piece silicon gasket for water tight seals
• Variety of mounting arrangements
• Choice of reflectors in polyester and aluminium
• Stanchion mounting bracket allows 10 to 150° rotation in vertical plane for setting
light direction
• Ideal for use as a symmetrical floodlight with aluminium reflector and yoke arm
Govan
�
Specifications
GL4 well glass
Classification
Rated voltage
Group IIII, Zone 1 & 2,
IIIIB + H2), T3
Exd Gas group IIIIA & IIIIB (II
220-250 V ±10 %, 50 Hz
Appr
oval
Approval
Ambient temperatur
e
temperature
AUS Ex 2017 to AS 2380-2 (IEC 79-1)
-20 °C to 50 °C
Degr
ee of pr
otection
Degree
protection
Lamp holder
IP 66
Porcelain E27 or E40
Housing material
Terminals
Marine grade corrosion resistant
aluminium alloy or cast stainless steel
grade 316
High grade melamine up to 4 sq mm
Dif
fuser
Diffuser
W eight
Impact resistant toughened glass
Aluminium alloy - 24 kg
Stainless steel - 37 kg
Reflector
Cable entry
Polyester, aluminium
Standard 2 x M20
Control gear integral
eflector
GL4 with aluminium dome rreflector
Standar
d finish
Standard
RAL7032 for aluminium alloy fitting
Stainless steel - unpainted
�
Options
1. Luminaire housing from cast stainless steel grade 316.
2. Other voltages and frequencies available.
3. Two coat epoxy paint finish.
4. Other cable entries available as requested.
�
Accessories
1. Variety of reflectors.
2. Wire guard for glass globe.
2 -1.6
1-6
GL4 with well glass
SECTION 1 EX LIGHTING
EXPLOSION PROOF WELL GLASS LUMINAIRE (Exd)
�
Ordering Information
Pendant Mount
Stanchion Mount
Cat.No.
Cat.No.
Cat.No.
�
Wall Mount
Cat.No.
Mercury vapour
80
Mercury vapour
125
GL4M08C
GL4M12C
GL4M08P
GL4M12P
GL4M08S
GL4M12S
GL4M08W
GL4M12W
Mercury vapour
250
GL4M25C
GL4M25P
GL4M25S
GL4M25W
Mercury vapour
400
GL4M40C
GL4M40P
GL4M40S
GL4M40W
HPS
70
HPS
150
GL4S07C
GL4S15C
GL4S07P
GL4S15P
GL4S07S
GL4S15S
GL4S07W
GL4S15W
HPS
250
GL4S25C
GL4S25P
GL4S25S
GL4S25W
HPS
400
GL4S40C
GL4S40P
GL4S40S
GL4S40W
Metal halide
175
Metal halide
250
GL4H17C
GL4H25C
GL4H17P
GL4H25P
GL4H17S
GL4H25S
GL4H17W
GL4H25W
Metal halide
400
GL4H40C
GL4H40P
GL4H40S
GL4H40W
Dimensions (mm)
Notes
�
1. The above catalogue numbers do not include lamps.
2. Please specify voltage, frequency, and cable entry size when ordering.
3. Optional accessories
A.
B.
C.
D.
Wire guard - Code 1.
Polyester dome reflector - Code D.
Polyester 30° angle reflector - Code A.
Aluminium high bay reflector - Code C.
Ceiling
Mounting
Govan
Ceiling Mount
Watts
Lamp TType
ype
4. Add “S” after the catalogue number for cast 316 stainless steel fitting.
Typical example of or
dering
ordering
GL4M25W-A1
GL4S4OC-C
GL4H25S-B-S- (Stainless steel)
�
Intensity distribution curves
Wall
Mounting
(Principal Planes)
GL4 symmetrical floodlight. (AL. reflector & glass
dome)
400 w Mercury Vapour lamp.
Beam efficiency
Beam type
�
60%
Wide/NEMA 6 h x 6 h
Intensity distribution curves
(Polar Curves)
Pendant
Mounting
GL4M40 High bay fitting (AL. reflector & glass dome)
400 w Mercury Vapour lamp.
LOR
Peak intensity @ 20°
63%
263 cd/1000 lm
Stanchion
Mounting
1-7
2 -1.7
SECTION 1 EX LIGHTING
EXPLOSION PROOF HIGH BAY LUMINAIRES
Up to 400 Watt (Exn and D.I.P.) ZONE 2
�
Specifications
GL3 Well glass
�
Classification
Degr
ee of pr
otection
Degree
protection
Exn Group IIII, Zone 2 to AS 2380.9
D.I.P Group II to AS 2236
Gas group IIC
IP 66 to AS 1939
Appr
oval
Approval
Temperatur
e class
emperature
Certificate No. Exn 967X
T2-T5 (Up to 250 W with glass globe)
D.I.P Certificate AUS Ex 935X
T4 (400 W Reflector/Lens)
Technical Data
Govan
Voltage / Fr
equency
Frequency
240 V/50 Hz – Other voltages available on request
Wattage
Mercury Vapour 50, 80, 125, 250, 400 W
Metal Halide 175, 250, 400 W
High Pressure Sodium 50, 70, 150, 250, 400 W
Power factor
0.85, Integral Ballast
W eight
MV
Under
�
MH
Cat. No. GL3
Dimensions (mm)
�
HPS
250 W
10 kg
15 kg
11 kg
250W
11 kg
16 kg
12 kg
400 W
12 kg
18 kg
14 kg
Lamp Holder
Terminal Block
Porcelain E27 (low wattages) or E40 (high wattages)
Cable Entries
2 x 25 mm conduit standard, 20 mm optional. (One entry
plugged and available for restricted breathing test of
installation).
Materials
High grade cast aluminium body, grey enamel finish.
Silicone rubber seals. Stainless steel external hardware.
Fibreglass reinforced polyester or spun aluminium reflectors.
Ceiling
Mounting
High grade Melamine for up to 4 mm2wire. Insulation grade
105 °C up to 250 W, 115 °C for 400 W
Pendant
Mounting
Photometrics
Stanchion
Mounting
W ithout rreflector
eflector
W ith aluminium high bay rreflector
eflector
Wall
Mounting
2 .1.8
1-8
SECTION 1 EX LIGHTING
EXPLOSION PROOF HIGH BAY LUMINAIRES (Exn AND D.I.P.)
�
Ordering Information
�
Products with Mercury Vapour Lamp
Ceiling
Mount
Cat.No.
Pendant
Mount
Cat.No.
Stanchion Mount
(25°,11/ 4" Pipe)
Cat.No.
Wall Mount
50
GL3M05C
GL3M05P
GL3M05S
GL3M05W
80
GL3M08C
GL3M08P
GL3M08S
GL3M08W
125
250
GL3M12C
GL3M25C
GL3M12P
GL3M25P
GL3M12S
GL3M25S
GL3M12W
GL3M25W
400
GL3M40C
GL3M40P
GL3M40S
GL3M40W
Lamp W
atts
Watts
Products with High Pressure Sodium Lamp
Ceiling
Mount
Cat.No.
Pendant
Mount
Cat.No.
Stanchion Mount
(25°,11/4" Pipe)
Cat.No.
Wall Mount
50
GL3S05C
GL3S05P
GL3S05S
GL3S05W
70
GL3S07C
GL3S07P
GL3S07S
GL3S07W
150
250
GL3S15C
GL3S25C
GL3S15P
GL3S25P
GL3S15S
GL3S25S
GL3S15W
GL3S25W
400
GL3S40C
GL3S40P
GL3S40S
GL3S40W
Lamp Watts
�
Govan
�
Cat.No.
Cat.No.
Products with Metal Halide Lamp
Ceiling
Mount
Cat.No.
Pendant
Mount
Cat.No.
Stanchion Mount
(25°,11/ 4" Pipe)
Cat.No.
Wall Mount
175
GL3H17C
GL3H17P
GL3H17S
GL3H17W
250
GL3H25C
GL3H25P
GL3H25S
GL3H25W
400
GL3H40C
GL3H40P
GL3H40S
GL3H40W
Lamp W
atts
Watts
Cat.No.
The above fixtures are fitted with prismatic glass globes as standard up to 250 watt and
refractor glass as standard on 400 watt lights. If guards, reflectors or different optics are
required then the following suffix should be added to the basic code selected above.
Optics alternatives
Reflector/Lens for 400 W
Reflector options for glass globe
L
Guard options
Wire guard for glass globe
Wire guard for reflector/lens
Cast guard for glass globe
1
2
3
Polyester, 30° angle
A
Aluminium high bay
B
Polyester dome
D
Examples:
GL3M05C
GL3M05C-R
GL3M05C-1A
Notes
�
1. Lamps not included as part of
supply unless specifically
requested as a priced option
(code – Y).
2. Specify conduit entry size (default
size is 25 mm).
1-9
2 -1.9
LIGHTING
PROOF HIGH BAY LUMINAIRES (Exn)
tt in stainless steel ZONE 2
SECTION 1 EX LIGHTING
tainless steel luminaire is a high intensity discharged light fixture for use
apour, High Pressure Sodium and Metal Halide lamps up to 400 watt.
EXPLOSION PROOF HIGH BAY LUMINAIRES (Exn)
ght fitting is designed for Group II Zone 2 hazardous areas with extreme
nments.
Up to 400 Watt in stainless steel ZONE 2
es of these types of areas are oil and gas platforms, refineries, wharfs,
environments where salt water or salt laden air creates corrosion problems.
ions
The GOLUX 9 stainless steel luminaire is a high intensity discharged light fixture for use
with Mercury Vapour, High Pressure Sodium and Metal Halide lamps up to 400 watt.
Degr
ee of pr
otection
Degree
protection
The GOLUX9 light fitting is designed for Group II Zone 2 hazardous areas with extreme
Zone 2 to AS 2380.9 (IEC 79-15)
IP
66
corrosive environments.
eel luminaire
Typical examples of these types of areas are oil and gas platforms, refineries, wharfs,
emperatur
e class
emperature
jetties and anyTenvironments
where salt water or salt laden air creates corrosion problems.
T2-T4
Ex 2035X
ency
�
Power factor
Specifications
Hz (other voltages available) GL9 Stainless 0.85
steel luminaire
ClassificationW eight
Cat. No. GL9
Degr
ee of pr
otection
Degree
protection
r – 50, 80, 125, 250, 400 W ExnR Group IIII,MV
- 11
kg AS 2380.9 (IEC 79-15)
Zone
2 to
175, 250, 400 W
MH
16
kg
Gas group IIIIC
odium 50, 70, 150, 250, 400 Appr
W oval
HPS - 12 kg
Approval
Dimensions
(mm)
Temperatur
e class
emperature
eratur
e
erature
Govan
C
IP 66
duit standard, other sizes
nt 1 – 1/4" BSP.
Lamp
holder
Certificate AUS
Ex 2035X
T2-T4
Porcelain E27 E40
Voltage/Fr
equency
oltage/Frequency
ol gear
Control
220-250 V, 50Contr
Hz (other
voltages available)
Power factor
Wattage
0.85
Integral
Mercury Vapour – 50, 80, 125, 250, 400 W
W eight
550
Ceiling mounting
6
MH - 16 kg
High Pressure Sodium 50, 70, 150, 250, 400 W
HPS - 12 kg
Ambient
temperatur
temperature
housing and covers are produced
from 1.5
mm thick e316
ess steel
-20 °C to 50 °C
Dimensions (mm)
�
Lamp holder
¯410
Porcelain E27 E40
screws and other hardware used
is stainless
Cable
entriessteel
220
is integrally mounted and is easily
accessible
for maintenance
2 x 25
mm conduit
standard, other sizes
Contr
ol gear
Control
Integral
Ceiling mounting
Wall mounting
nted terminal block for ease ofoptional.
field wiring
Pendant 1 – 1/4" BSP.
Features
Cat. No. GL9
MV - 11 kg
Metal Halide – 175, 250, 400 W
icon gaskets for long lasting water tight seals
�
6
550
610
nt clear prismatic glass globe
� fitted to housing by screwing into a
el 316 grade retaining ring
• The fittings housing and covers are produced from 1.5 mm thick 316
¯310
grade stainless steel
¯410
• All securing screws and other hardware used is stainless steel
220
• Control gear is integrally mounted and is easily accessible for maintenance
Wall mounting
• Factory mounted terminal block for ease of field wiring
• One piece silicon gaskets for long lasting water tight seals
500
Pendant mounting
1 - 1/4” BSP
5
• Heat resistant clear prismatic glass globe fitted to housing by screwing
into a
stainless steel 316 grade retaining ring
610
¯310
¯410
550
25¡
Stanchion mounting
1 - 1/4” pipe
500
5
Pendant mounting
1 - 1/4” BSP
¯410
550
2 -1.10
25¡
1-10
Stanchion mounting
1 - 1/4” pipe
SECTION 1 EX LIGHTING
EXPLOSION PROOF HIGH BAY LUMINAIRES (Exn)
�
Ordering Information
�
Products with Mercury Vapour Lamp
Ceiling Mount
Cat.No.
Pendant Mount
Cat.No.
Stanchion Mount
Cat.No.
Wall Mount
Cat.No.
50
GL9M05C
GL9M05P
GL9M05S
GL9M05W
80
GL9M08C
GL9M08P
GL9M08S
GL9M08W
125
250
GL9M12C
GL9M25C
GL9M12P
GL9M25P
GL9M12S
GL9M25S
GL9M12W
GL9M25W
400
GL9M40C
GL9M40P
GL9M40S
GL9M40W
Lamp W
atts
Watts
Products with High Pressure Sodium Lamp
Ceiling Mount
Pendant Mount
Stanchion Mount
Wall Mount
50
Cat.No.
GL9S05C
Cat.No.
GL9S05P
Cat.No.
GL9S05S
Cat.No.
GL9S05W
70
GL9S07C
GL9S07P
GL9S07S
GL9S07W
150
250
GL9S15C
GL9S25C
GL9S15P
GL9S25P
GL9S15S
GL9S25S
GL9S15W
GL9S25W
400
GL9S40C
GL9S40P
GL9S40S
GL9S40W
Lamp W
atts
Watts
�
Products with Metal Halide Lamp
Ceiling Mount
Pendant Mount
Stanchion Mount
Wall Mount
175
Cat.No.
GL9H17C
Cat.No.
GL9H17P
Cat.No.
GL9H17S
Cat.No.
GL9H17W
250
GL9H25C
GL9H25P
GL9H25S
GL9H25W
400
GL9H40C
GL9H40P
GL9H40S
GL9H40W
Lamp W
atts
Watts
�
Govan
�
Options
Suffix to be added to code
Polyester, 30° angle
Polyester dome
Wire guard
Typical examples of codes:
GL9M12W-A1, GL9S25C-BS
A
D
1
Notes
�
1 Lamps not included as part of
supply unless specifically
requested as a priced option.
2 Specify conduit entry size (default
size is M25)
1-11
2 -1.11