Technical characteristics
Grafi DIN cabinets
Grafi 5, 7, 9, 12 cabinets
Connection to base according to DIN 43629.
Rated insulation voltage Ui 690V.
Easily disassembled front cross-piece for
improved access. Total insulation:
Hinged door complete with closing mechanism
operated by a retracting handle and Y21 singlecipher safety lock (DIN18252 profile cylinder). Door
opening side can be changed on site.
Mechanical strength tests performed in
accordance with standard IEC EN 61439-5.
Bottom plate with studs with M10 threaded inserts
in UNI EN 12165 brass buried in the moulding
and positioned in accordance with DIN 43629
standards.
Rated insulation voltage Ui 690V.
Complete with fixing frame for installation on a
concrete base.
Hinged door complete with closing mechanism
operated by a retracting handle and Y21 singlecipher safety lock (DIN18252 profile cylinder
- customized cipher on request). Door opening
side can be changed on site. Can be equipped
with bottom plates and dedicated accessories for
creating panels. Bottom plate equipped with studs
that can be fitted with threaded inserts with M5x20
stud bolts for fixing accessories.
Lower closing partition with conical fairleads and
seal (only IP55 versions).
Materials
Materials
Fiberglass-reinforced plastic in RAL 7038 colour.
Handle in thermoplastic resin. Rotating bracket in
galSpacezed steel. Internal rods and posts in steel
with GEOMET 321 treatment. Concealed external
hinges in stainless steel. Frame in galSpacezed
and painted steel.
Seals in foamed EPDM.
Made of RAL 7038 coloured fiberglass-reinforced
plastic. Handle in thermoplastic resin. Rotating
bracket in galSpacezed steel. Internal rods and
posts in steel with GEOMET 321 treatment.
Concealed external hinges in stainless steel. Frame
in galSpacezed and painted steel.
Seals in foamed EPDM.
Standards
Standards
Cabinet conforming to IEC EN 62208 standards.
Protection class IP55-IP44 according to IEC EN
60529. Mechanical strength tests performed in
accordance with standard IEC EN 61439-5.
In bakelite material, internal
partition to be fixed at
different height in the cabinet.
12
Made in accordance with standard IEC EN 62208.
Protection classes IP55 and IP44 in compliance with
IEC EN 60529, IK10 according to IEC CEI EN 62262.
Pre-engineered for apparatus in class II according
to IEC 64-8/4.
Inserts with M10 thread buried
in the base panel during the
moulding phase allow bottom
plates to be applied.
Pre-engineered for fastening the base
in accordance with the DIN 43629
standard. Easily disassemebled front
cross-piece for improved access.
G E N E R A L CATA LO G U E G R A F I
•
CONCHIGLIA SPA
New type of recessed handle.
Greater protection against
vandalism. A dedicated
gasket protects the keylock
against dirty.
Doors hinge in stainless steel
Aisi 304. The doors can be
conveniently removed for
easy installation of the internal
equipment.
Dedicatd keylock with three
hooks prepared to reverse the
sense of the door.
IP protections
Thanks to the construction characteristics and
the special snap-fit profile used as a seal, an
IP44 cabinet can easily be converted into an
IP55 version by fitting the seal into the relative
housings. Vice versa, an IP55 cabinet can be
converted into an IP44 version by removing the
door seal if the internal equipment requires extra
ventilation and especially if such a conversion
is permitted by the project specifications and
installation conditions.
IP55
IP44
G E N E R A L CATA LO G U E G R A F I
•
CONCHIGLIA SPA
13