Slide units SPZ, twin piston Slide units SPZ, twin piston Key features Multi-axis and drive combinations The slide unit SPZ can be combined with different drives. An adapter kit is required for mounting between the two drives. DPZ-/SPZ axis Adapter kits èwww.festo.com Shock absorbers for slide operation From 30 … 900 mm/s In slide operation, shock absorbers provide highly dynamic but gentle operating characteristics Slide operation SPZ-… 2 è Internet: www.festo.com/catalogue/... Subject to change – 2014/04 Slide units SPZ, twin piston Overview and type codes Function Version Doubleacting Piston j Stroke Position sensing Plain bearing guide [mm] [mm] A GF 10 16, 20, 25, 32 10, 25, 40, 50 10, 25, 40, 50, 80, 100 SPZ n — 16 Recirculating ball bearing guide KF n — 100 — P n — A — KF Type Double-acting SPZ Slide unit Piston j [mm] Stroke [mm] Cushioning P Flexible cushioning rings/plates at both ends Position sensing A For proximity sensor Guide KF Plain bearing guide Recirculating ball bearing guide 2014/04 – Subject to change è Internet: www.festo.com/catalogue/... 3 Slide units SPZ, twin piston Peripherals overview 2 1 2 6 4 5 3 1 Accessories Brief description 1 2 3 4 5 6 – – – 4 Shock absorber YSR-C Stop limiters YSRA Proximity sensor SME/SMT-8 Slot cover ABP-5-S One-way flow control valve GRLA Push-in fitting QS Centring pin ZBS Centring sleeve ZBH Adapters Hydraulic shock absorber with rapidly increasing cushioning characteristic Stroke limiter for shock absorber Piston j 10, 16 mm è Page/Internet 20, 25, 32 mm n n 13 n Plain bearing guide n Plain bearing guide 13 Can be integrated in the cylinder profile barrel n n 14 To protect the sensor cable and keep dirt out of the sensor slots To regulate speed n n 14 n n 15 For connecting compressed air tubing with standard O.D. 2 pieces included in scope of delivery n n quick star n – – n 15 n n 16 gripper 2 pieces included in scope of delivery For drive/drive combinations For drive/gripper combinations è Internet: www.festo.com/catalogue/... 15 Subject to change – 2014/04 Slide units SPZ, twin piston Technical data Function -N-T-W- Diameter 10 … 32 mm Stroke length 10 … 100 mm www.festo.com General technical data Piston Pneumatic connection Operating medium Note on operating/pilot medium Operating pressure [bar] Constructional design 10 16 20 25 32 Mounting position Protection against torsion/guide M5 M5 M5 M5 Gx Compressed air in accordance with ISO 8573­1:2010 [7:4:4] Operation with lubricated medium possible (in which case lubricated operation will always be required) 2,5 … 10 1 … 10 Slide Parallel piston rods Flexible cushioning rings/plates at both ends For proximity sensing Via through-holes With female thread With mounting plate Any Parallel piston rods/with plain-bearing guide or ball bearing guide Ambient conditions Variant Plain-bearing guide GF Recirculating ball bearing guide KF Ambient temperature1) [°C] Corrosion resistance class CRC2) –20 … +80 2 – Cushioning Position sensing Type of mounting 1) 2) Note operating range of proximity sensors. Corrosion resistance class 2 according to Festo standard 940 070 Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents. Forces [N] Piston 10 16 20 25 32 Theoretical force at 6 bar, advancing Theoretical force at 6 bar, retracting 60 60 180 180 282 282 452 452 724 724 2014/04 – Subject to change è Internet: www.festo.com/catalogue/... 5 Slide units SPZ, twin piston Technical data Permissible lateral force Fq as a function of stroke l Recirculating ball bearing guide KF Fq [N] Fq [N] Plain-bearing guide GF l [mm] l [mm] Permissible torque ML as a function of stroke l Recirculating ball bearing guide KF ML [Nm] ML [Nm] Plain-bearing guide GF l [mm] 6 l [mm] è Internet: www.festo.com/catalogue/... Subject to change – 2014/04 Slide units SPZ, twin piston Technical data Materials Sectional view 2 3 1 3 4 2 Slide unit 1 2 3 Housing Yoke plate Plug cap 4 Piston rod – Seals 2014/04 – Subject to change GF KF GF KF Wrought aluminium alloy Tool steel Brass Wrought aluminium alloy High-alloy stainless steel Tempered steel Polyurethane, nitrile rubber è Internet: www.festo.com/catalogue/... 7 Slide units SPZ, twin piston Technical data Download CAD data è www.festo.com Dimensions Piston 10, 16 mm, plain-bearing guide GF 1 Mounting slot for proximity sensors 2 Supply port optionally left or right + = plus stroke length ++ = plus 2x stroke length B1 B2 B3 B4 B5 B6 D1 D2 D3 D4 D5 D6 D7 D8 D9 H7 H1 H2 H3 10 16 52 62 50 60 33 39 58.5 68.5 16 16 6.5 6.5 6 8 7.5 7.5 M5 M5 8 8 M5 M5 4.2 4.2 M10x1 M10x1 M5 M5 5 5 20 23 19 22 10 11 H4 H5 H6 H7 H8 L1 L2 L3 L4 L5 L7 L8 L91) L10 T1 T2 T3 T4 ß1 5 5 11.5 13 4 4 2 2 1 1 129.6 132.6 71.6 74.6 19 19 10 10 30 30 23.4 22 159.6 162.6 20 20 4.5 5.5 4.4 4.4 3.4 4.6 5 4.5 2 2 13 13 [mm] [mm] 10 16 Stroke L181) ±0.03 L191) ±0.03 – – 40 40 40 40 – – – – 80 80 [mm] 10 25 40 50 80 100 1) 8 Tolerance for centring hole 0.03 mm Tolerance for thread 0.2 mm è Internet: www.festo.com/catalogue/... Subject to change – 2014/04 Slide units SPZ, twin piston Technical data Download CAD data è www.festo.com Dimensions Piston 10, 16 mm, recirculating ball bearing guide KF 1 Mounting slot for proximity sensors 2 Supply port optionally left or right + = plus stroke length ++ = plus 2x stroke length B1 B2 B3 B4 B5 B6 D1 D2 D3 D4 D5 D6 D7 D8 D9 H7 H1 H2 H3 H4 10 16 52 62 50 60 33 39 58.5 68.5 16 16 6.5 6.5 6 8 7.5 7.5 M5 M5 8 8 M5 M5 4.2 4.2 M10x1 M10X1 M5 M5 5 5 20 23 19 22 10 11 5 5 H5 H6 H7 H8 L1 L2 L3 L4 L5 L7 L8 L91) L10 T1 T2 T3 T4 ß1 11.5 13 7.5 7.5 2 2 1 1 129.6 132.6 107.6 106.6 1 3 10 10 30 30 40.7 38.9 159.6 158.6 20 20 4.5 5.5 4.4 4.4 3.4 4.6 5 4.5 2 2 13 13 [mm] [mm] 10 16 Stroke L181) ±0.03 L191) ±0.03 – – 40 40 40 40 – – – – 80 80 [mm] 10 25 40 50 80 100 1) Tolerance for centring hole 0.03 mm Tolerance for thread 0.2 mm 2014/04 – Subject to change è Internet: www.festo.com/catalogue/... 9 Slide units SPZ, twin piston Technical data Download CAD data è www.festo.com Dimensions Piston 20, 25, 32 mm, plain-bearing guide GF 1 Mounting slot for proximity sensors 2 Supply port optionally left or right + = plus stroke length ++ = plus 2x stroke length B1 B2 B3 B4 B5 B6 D1 D2 D3 D4 D5 D6 D7 D8 D9 H7 D10 H1 H2 H3 20 25 32 74 82 100 72 80 98 45.6 49.2 57 80.5 88.5 106.5 23 25 24 6.5 6.5 6.5 10 12 16 9 10.5 10.5 M6 6.4 6.4 9.5 9.5 10.5 M5 M5 Gx 5.2 5.2 6.2 M12x1 M16x1 M16x1 M6 M6 M8 9 9 9 M6 M6 M6 25 31 39 24 30 38 5 5 – H4 H5 H6 T5 ß1 10 10 10 15 19 19 [mm] H7 H8 L1 L2 L3 L4 L5 L6 L7 L8 L91) T1 T2 T3 [mm] 20 25 32 +0.2 5 5 7.5 Stroke T4 14 17 21 4 4.5 4.5 2 2 2 1 1 1 146.6 160.6 170.1 76.6 76.6 80.1 L181) ±0.03 L191) ±0.03 – – 40 40 40 40 – – – – 80 80 23 30 30 12 12 15 30 28 35 – 38 45 22.8 20.2 25 178.6 194.6 204.1 20 20 20 5.4 6.4 6.4 5 5 6.5 6 6 10 2.1 2.1 2.1 [mm] 10 25 40 50 80 100 1) 10 Tolerance for centring hole 0.03 mm Tolerance for thread 0.2 mm è Internet: www.festo.com/catalogue/... Subject to change – 2014/04 Slide units SPZ, twin piston Technical data Download CAD data è www.festo.com Dimensions Piston 20, 25, 32 mm, recirculating ball bearing guide KF 1 Mounting slot for proximity sensors 2 Supply port optionally left or right + = plus stroke length ++ = plus 2x stroke length B1 B2 B3 B4 B5 B6 D1 D2 D3 D4 D5 D6 D7 D8 D9 H7 D10 H1 H2 H3 20 25 32 74 82 100 72 80 98 45.6 49.2 57 80.5 88.5 106.5 23 25 24 6.5 6.5 6.5 10 12 16 9 10.5 10.5 M6 6.4 6.4 9.5 9.5 10.5 M5 M5 Gx 5.2 5.2 6.2 M12x1 M16x1 M16x1 M6 M6 M8 9 9 9 M6 M6 M6 25 31 39 24 30 38 5 5 – H4 H5 T5 ß1 10 10 10 15 19 19 [mm] H6 H7 H8 L1 L2 L3 L4 L5 L6 L7 L8 L91) T1 T2 T3 [mm] 20 25 32 +0.2 5 5 7.5 Stroke T4 14 17 21 6.5 7.5 7.5 2 2 2 1 1 1 146.6 160.6 170.1 120.6 130.6 134.1 L181) ±0.03 L191) ±0.03 – – 40 40 40 40 – – – – 80 80 1 3 3 12 12 15 30 28 35 – 38 45 43.4 184.6 40 202.6 44.9 206.1 20 20 20 5.4 6.4 6.4 5 5 6.5 6 6 10 2.1 2.1 2.1 [mm] 10 25 40 50 80 100 1) Tolerance for centring hole 0.03 mm Tolerance for thread 0.2 mm 2014/04 – Subject to change è Internet: www.festo.com/catalogue/... 11 Slide units SPZ, twin piston Technical data Ordering data Type 1) 12 Piston [mm] Stroke [mm] Plain-bearing guide GF Part No. Type1) Recirculating ball bearing guide KF Part No. Type1) 10 10 25 40 50 32 714 32 715 32 716 32 717 SPZ-10-10-P-A SPZ-10-25-P-A SPZ-10-40-P-A SPZ-10-50-P-A 162 166 162 167 162 168 162 169 SPZ-10-10-P-A-KF SPZ-10-25-P-A-KF SPZ-10-40-P-A-KF SPZ-10-50-P-A-KF 16 10 25 40 50 80 100 32 719 32 720 32 721 32 722 32 723 32 724 SPZ-16-10-P-A SPZ-16-25-P-A SPZ-16-40-P-A SPZ-16-50-P-A SPZ-16-80-P-A SPZ-16-100-P-A 162 171 162 172 162 173 162 174 162 175 162 176 SPZ-16-10-P-A-KF SPZ-16-25-P-A-KF SPZ-16-40-P-A-KF SPZ-16-50-P-A-KF SPZ-16-80-P-A-KF SPZ-16-100-P-A-KF 20 10 25 40 50 80 100 32 726 32 727 32 728 32 729 32 730 32 731 SPZ-20-10-P-A SPZ-20-25-P-A SPZ-20-40-P-A SPZ-20-50-P-A SPZ-20-80-P-A SPZ-20-100-P-A 162 178 162 179 162 180 162 181 162 182 162 183 SPZ-20-10-P-A-KF SPZ-20-25-P-A-KF SPZ-20-40-P-A-KF SPZ-20-50-P-A-KF SPZ-20-80-P-A-KF SPZ-20-100-P-A-KF 25 10 25 40 50 80 100 32 733 32 734 32 735 32 736 32 737 32 738 SPZ-25-10-P-A SPZ-25-25-P-A SPZ-25-40-P-A SPZ-25-50-P-A SPZ-25-80-P-A SPZ-25-100-P-A 162 185 162 186 162 187 162 188 162 189 162 190 SPZ-25-10-P-A-KF SPZ-25-25-P-A-KF SPZ-25-40-P-A-KF SPZ-25-50-P-A-KF SPZ-25-80-P-A-KF SPZ-25-100-P-A-KF 32 10 25 40 50 80 100 159 721 159 722 159 723 159 724 159 725 159 726 SPZ-32-10-P-A SPZ-32-25-P-A SPZ-32-40-P-A SPZ-32-50-P-A SPZ-32-80-P-A SPZ-32-100-P-A 162 192 162 193 162 194 162 195 162 196 162 197 SPZ-32-10-P-A-KF SPZ-32-25-P-A-KF SPZ-32-40-P-A-KF SPZ-32-50-P-A-KF SPZ-32-80-P-A-KF SPZ-32-100-P-A-KF 2 centring pins or sleeves are included in the scope of delivery. è Internet: www.festo.com/catalogue/... Subject to change – 2014/04 Slide units SPZ, twin piston Accessories Shock absorber YSR-C Material: YSR-7-5-C, YSR-8-8-C: Nickel-plated brass YSR-12-12-C: Galvanised steel Free of copper, PTFE and silicone Dimensions and ordering data For B1 D1 D2 [mm] 10, 16 20 25, 32 3.5 4 5 M10x1 M12x1 M16x1 3 4 6 D3 D4 L1 ±0.1 L2 ±0.3 L3 +0.7/–0.35 L4 ±0.2 L5 +0.55/–0.25 ß Part No. Type 6 ±0.1 8 ±0.2 12 ±0.2 8.6 ±0.05 10.4 ±0.1 14.5 ±0.1 34 46 64 23 33 51 12.3 16.3 24.5 7 8 12 7.3 8.3 12.5 13 15 19 160 272 34 571 34 572 YSR-7-5-C YSR-8-8-C YSR-12-12-C Stop limiter YSRA for use when shock absorbers are fitted (not in the case of recirculating ball bearing guide) Material: Steel Dimensions and ordering data For L ß For shock absorbers 13 15 19 YSR-7-5-C YSR-8-8-C YSR-12-12-C [mm] 10, 16 20 25, 32 Weight Part No. Type 150 932 150 933 150 934 YSRA-7-C YSRA-8-C YSRA-12-C [g] 15 19 25.5 2014/04 – Subject to change 12 28 48 è Internet: www.festo.com/catalogue/... 13 Slide units SPZ, twin piston Accessories Electrical connection Cable length [m] Part No. Technical data è Internet: smt Type Cable, 3-wire Plug M8x1, 3-pin Plug M12x1, 3-pin Cable, 3-wire Plug M8x1, 3-pin 2.5 0.3 0.3 2.5 0.3 574335 574334 574337 574338 574339 SMT-8M-A-PS-24V-E-2,5-OE SMT-8M-A-PS-24V-E-0,3-M8D SMT-8M-A-PS-24V-E-0,3-M12 SMT-8M-A-NS-24V-E-2,5-OE SMT-8M-A-NS-24V-E-0,3-M8D Cable, 3-wire 7.5 574340 SMT-8M-A-PO-24V-E-7,5-OE Electrical connection Cable length [m] Part No. Technical data è Internet: sme Type Cable, 3-wire Cable, 2-wire Plug M8x1, 3-pin Cable, 3-wire Plug M8x1, 3-pin 2.5 5.0 2.5 0.3 2.5 0.3 543 862 543 863 543 872 543 861 150 855 150 857 SME-8M-DS-24V-K-2,5-OE SME-8M-DS-24V-K-5,0-OE SME-8M-ZS-24V-K-2,5-OE SME-8M-DS-24V-K-0,3-M8D SME-8-K-LED-24 SME-8-S-LED-24 Cable, 3-wire 7.5 160 251 SME-8-O-K-LED-24 Electrical connection, right Cable length [m] Part No. Technical data è Internet: nebu Type Straight socket, M8x1, 3-pin Cable, open end, 3-wire Straight socket, M12x1, 5-pin Cable, open end, 3-wire Angled socket, M8x1, 3-pin Cable, open end, 3-wire Angled socket, M12x1, 5-pin Cable, open end, 3-wire 2.5 5 2.5 5 2.5 5 2.5 5 541 333 541 334 541 363 541 364 541 338 541 341 541 367 541 370 NEBU-M8G3-K-2.5-LE3 NEBU-M8G3-K-5-LE3 NEBU-M12G5-K-2.5-LE3 NEBU-M12G5-K-5-LE3 NEBU-M8W3-K-2.5-LE3 NEBU-M8W3-K-5-LE3 NEBU-M12W5-K-2.5-LE3 NEBU-M12W5-K-5-LE3 Part No. Type 151 680 ABP-5-S Ordering data – Proximity sensors for T-slot, magneto-resistive Type of mounting Switch output N/O contact Insertable in the slot from above, flush with cylinder profile, short design PNP NPN N/C contact Insertable in the slot from above, flush with cylinder profile, short design PNP Ordering data – Proximity sensors for T-slot, magnetic reed Type of mounting Switch output N/O contact Insertable in the slot from above, flush with cylinder profile Contacting Insertable in the slot lengthwise, flush with the cylinder profile Contacting Insertable in the slot lengthwise, flush with the cylinder profile Contacting N/C contact Ordering data – Connecting cables Electrical connection, left Ordering data – Slot cover for T-slot Mounting Length Insertable from above 14 2x 0.5 m è Internet: www.festo.com/catalogue/... Subject to change – 2014/04 Slide units SPZ, twin piston Accessories Ordering data – One-way flow control valves Connection Thread M5 Gx Ordering data – Accessories For dia. [mm] Centring pin ZBS 10, 16 Centring sleeve ZBH 20, 25, 30 1) Technical data è Internet: grla Material Part No. Type Metal design 193 137 193 138 193 139 193 142 193 143 193 144 193 145 GRLA-M5-QS-3-D GRLA-M5-QS-4-D GRLA-M5-QS-6-D GRLA-x-QS-3-D GRLA-x-QS-4-D GRLA-x-QS-6-D GRLA-x-QS-8-D Material Part No. Type Stainless steel Free of copper, PTFE and silicone 150 928 Technical data è Internet: zbs ZBS-5 10 Stainless steel Free of copper, PTFE and silicone 150 927 Technical data è Internet: zbh ZBH-9 10 For tubing O.D. 3 4 6 3 4 6 8 PE1) Packaging unit quantity 2014/04 – Subject to change è Internet: www.festo.com/catalogue/... 15 Slide units SPZ, twin piston Accessories -H- Material: Wrought aluminium alloy Free of copper and PTFE RoHS-compliant Adapter kit BPL Permissible drive/drive combinations with adapter kit Combination 1 Drive Size DPZ/SPZ 2 Note The kit includes the individual mounting interface as well as the necessary mounting material. Download CAD data è www.festo.com 2 Drive Size Adapter kit CRC1) Part No. DPZ 20, 25, 32 20, 25, 32 25, 32 32 SPZ 10, 16 20 25 32 BPL SPZ 20, 25, 32 20, 25, 32 25, 32 32 SPZ 10, 16 20 25 32 BPL Type 2 150929 150930 150931 150931 BPL-1 BPL-2 BPL-3 BPL-3 2 150929 150930 150931 150931 BPL-1 BPL-2 BPL-3 BPL-3 1 SPZ/SPZ 2 1 1) 16 Corrosion resistance class CRC 2 to Festo standard FN 940070 Moderate corrosion stress. Indoor applications in which condensation may occur. External visible parts with primarily decorative requirements for the surface and which are in direct contact with the ambient atmo­ sphere typical for industrial applications. è Internet: www.festo.com/catalogue/... Subject to change – 2014/04