Contents
Related catalogues
Low-Voltage Controls and
Distribution
SIRIUS · SENTRON · SIVACON
Order No.:
Catalog
E86060-K1002-A101-A7-7600
Technical Information incl.
Low-Voltage
Controls and Components
for Applications according to UL
Order no.:
E86060-K1816-A101-A1-7600
Industrial Communication
Industrial Communication
for Automation and Drives
Order No.:
E86060-K6710-A101-B6-7600
E86060-K6710-A121-A2-7600
LV 1
LV 1 T
LV 16
IK PI
IK PI N
Systems • Controlgear: Contactors and contactor assemblies,
solid-state switching devices • Protection equipment • Load
feeders, motor starters and soft starters • Monitoring and
control devices • Detecting devices • Commanding and
signaling devices • Transformers • Power supplies • Planning
and configuration with SIRIUS • Power Management System •
SIVACON Power, distribution boards, busway and cubicle
systems • SENTRON switching and protection devices for
power distribution • Air circuit breakers, molded case circuit
breakers, switch disconnectors • Software for power distribution
• BETA low-voltage circuit protection
SIRIUS 3RV17 and 3RV18 circuit breakers according to
UL 489 • SIVACON Components for 8US Distribution Systems
according to UL 508A • SENTRON 3WL5 air circuit
breakers/non-automatic air circuit breakers according to UL
489/IEC • SENTRON 3VL Molded Case Circuit Breakers
according to UL 489/IEC • ALPHA Devices according to UL
Standard • BETA Devices according to UL standard
PROFINET/Industrial Ethernet • Industrial Mobile
Communicaton • PROFIBUS to IEC 61158/EN 50170 • SIMATIC
ET 200 distributed I/Os • AS-Interface to EN 50295/IEC 61158 •
Remote operation with SINAUT Telecontrol • Routers •
ECOFAST system
LV 50
System cubicles • Cubicle modifications • Cubicle expansion
components • Accessories • Special cubicles Cubicle solutions
in applications • Cubicle air-conditioning • Special colors
SIDAC
Reactors and Filters
Order No.:
E86060-K2803-A101-A4-7600
LV 60
Commutating reactors for converters • Mains reactors for
frequency converters • Iron-core output reactors • Ferrite output
reactors • Iron-core smoothing reactors • Smoothing air-core
reactors • Filter reactors • Application-specific reactors • Radio
interference suppression filters • dv/dt filters • Sinewave filters
SIVACON 8PS
CD-K, BD01, BD2
Busbar Trunking Systems
up to 1250 A
Order No.:
E86060-K1870-A101-A3-7600
LV 70
Busbar trunking systems, overview • CD-K system
(25 A to 40 A) • BD01 system (40 A to 160 A) • BD2 system (160
A to 1250 A)
Automation & Drives
The A&D Offline Mall
CD-ROM:
E86060-D4001-A110-C6-7600
DVD:
E86060-D4001-A510-C6-7600
CA 01
All Automation and Drives products,
including those in the catalogs listed above.
SICUBE
System Cubicles and
Cubicle Air-Conditioning
Order No.:
E86060-K1920-A101-A3-7600
A&D Mall
Internet:
http://www.siemens.com/automa
tion/mall
All Automation and Drives products,
including those in the catalogs listed above.
Catalog-PDF
Internet:
http://www.automation.
siemens.com/cd
All catalogs for low-voltage controls and distribution can be
downloaded as PDF files.
Registered trademarks
All product designations may be registered trademarks or
product names of Siemens AG or other supplying
companies. Third parties using these trademarks or product
names for their own purposes may infringe upon the rights of
the trademark owners.
Further information about low-voltage controls is available on
the Internet at:
http://www.siemens.com/lowvoltage
Technical Assistance
Expert technical assistance for
Low-voltage controls and
electrical installation.
Tel.: +49 (9 11) 8 95-59 00
Fax: +49 (9 11) 8 95-59 07
E-Mail: technicalassistance@siemens.com
sivacon S4
Power Distribution Boards
Introduction
1
Power Distribution Boards
2
Standard Configurations
3
Cubicles, Supporting Structure and
Enclosures
4
Busbar System
5
Assembly Kits for Switching Devices
6
Covers, Modular Doors, Mounting Plates,
19” Rack
7
Internal Separation
8
Air-conditioning Products
9
Catalogue LV 56 · 2008
The products listed in
this catalogue are manufactured at production units working according to a quality system
certified for conformity
to EN 29001 (ISO 9001)
Not valid:
Catalogue LV 56 · 2006
Contact your local Siemens
representative for further information
© Siemens AG 2008
Accessories
10
Mechanical Dimensions
11
Planning and Configuration
12
Appendix
13
Explanations
Information on catalogue LV 56 · 2008 and Manual SIVACON S4 · 2008
Catalogue LV 56 · 2008 contains the data relevant
to selection and ordering.
Additional information is given in SIVACON S4 Manual.
Delivery class (DC)1)
The delivery class indicates a product’s delivery time
in working days from order receipt to product ready
for dispatching from the warehouse.
Price1)
The stated price is in € and refers to the price per
unit (PU).
Price unit (PU)
The price unit specifies to how many items (IT), sets
(ST) or metres (M) the stated price and weight
applies.
Price group (PG)1)
Each product is assigned to a price group.
Dimensions
All dimensions are expressed in mm.
1)
Information is provided on a separate price list.
2
Siemens LV 56 · 2008
Total deliver time is given by the sum of order processing time in the country of
origin, predetermined delivery time and transport time.
1
Introduction
1/2
Siemens Automation and Drives
Welcome
1/4
Sharpen your competitive edge
Totally Integrated Automation
1/6
Low-Voltage Power Distribution
with SIVACON, SENTRON and SIMARIS
Siemens LV 56 · 2008
Siemens Automation and Drives.
Welcome
More than 60,000 people aiming for the same goal: increasing your competitiveness. That's Siemens Automation and Drives.
We offer you a comprehensive portfolio for sustained
success in your sector, whether you’re talking automation engineering, drives or electrical installation systems. Totally Integrated Automation (TIA) and Totally Integrated Power (TIP) form the core of our offering. TIA
and TIP are the basis of our integrated range of products
and systems for the manufacturing and process industries as well as building automation. This portfolio is
rounded off by innovative services over the entire life cycle of your plants.
Learn for yourself the potential our products and systems offer. And discover how you can permanently increase your productivity with us.
Your regional Siemens contact can provide more information. He or she will be glad to help.
1/2
Siemens LV 56 · 2008
Siemens LV 56 · 2008
1/3
Integrated energy distribution
from a single source.
Totally Integrated Power
Totally Integrated Power (TIP) brings together all the components
of electrical energy distribution into an integrated whole. Thus TIP
provides the answer to growing market demands in the planning,
construction and use of utility buildings and industrial buildings.
On the basis of TIP, we offer integrated solutions for energy distribution, from medium voltage to the power outlet. Totally Integrated Power is based here on integration in planning and configuring as well as on perfectly matched products and systems.
1/4
1/4
Siemens LV 56 · 2008
Siemens IK PI · 2000
Totally Integrated Power offers communication
and software modules for connecting the energy
distribution systems to industrial automation and
building automation. This enables the implementation of significant savings potential.
Siemens LV 56 · 2008
1/5
Low-voltage power distribution with
SIVACON, SENTRON and SIMARIS
Non-residental buildings and industrial plants have one thing in
common: without electricity, everything comes to a halt. The availability, safety and cost effectiveness of the power distribution system is of utmost importance – from the medium voltage supply
point through to the socket outlet. And only integrated solutions
can ensure maximum efficiency for planning, configuration and
SIVACON power distribution boards
operation.
The concept is called Totally Integrated Power from Siemens.
Total integration in planning and configuration creates synergies
and saves costs. Perfectly matched products and systems provide efficient engineering and reliable operation. In the field of
low-voltage power distribution, the following product ranges are
available:
SIVACON: From flexible busbar trunking systems through to safe
power distribution boards and motor control centers.
SENTRON: From well-proven switch disconnectors through to intelligent circuit breakers.
SENTRON switching devices
Software for power distribution: Everything for dimensioning,
configuring, visualizing and controlling your power distribution.
SIMARIS software for power distribution
1/6
Siemens LV 56 · 2008
2
SIVACON S4
Power Distribution Boards
2/2
Introduction
2/3
General Data
2/6
Technical Data
2/7
Declaration of conformity
Siemens LV 56 · 2008
SIVACON S4 Power Distribution Boards
Introduction
■ Front view
2
SIVACON S4 is an AS (TTA-TSK) switchgear and controlgear
system, type tested according to IEC 60439-1, CEI EN 60439-1,
for installation as primary or secondary boards in industrial and
service sector facilities, including hospitals, shopping centres,
banks, schools. etc. The SIVACON S4 energy distribution
concept consists of a full line-up of boards in galvanised
2/2
Siemens LV 56 · 2008
chromed sheet steel, of sturdy design, suitable for any
installation modality: self-standing, flush or wall-mounted.
SIVACON S4 low-voltage power distribution boards are
constructed according to a modular design system and, by
means of ad hoc assembly kits, can be combined to meet all
power distribution needs.
SIVACON S4 Power Distribution Boards
General data
■ Description
System
SIVACON S4 is a system of low-voltage power distribution
boards, for indoor use, panelled on four sides, suitable for selfstanding or wall-mounted installation.
2
The cubicle
The constituent elements of the cubicle framework, having a
2.5mm thick profile, are inserted into one another to form a
parallelepiped shaped column. This provides the bearing
structure supporting all add-on interior switchgear components,
i.e., assembly kits, busbar systems, mounting plates, etc. Stable
and rugged construction is ensured through the use of Torx selftapping screws. Equipotential and safe grounding of all parts
are also achieved.
The enclosure
Enclosure parts made of galvanised sheet steel are
dimensioned as a function of the cubicle they are fitted to.
Different versions make it possible to achieve various degrees of
protection: IP 30/31, IP 40/41 or IP 55. Walls and doors are
coated with slightly embossed RAL 7035 powder-paint. In
addition to the standard two-way interlocking system, the doors
can be equipped with numerous types of operating mechanism
including rotary handles, with or without locks, to meet any need.
Assembly kit covers are secure by means of captive quickrelease screws. Opening and closing is by rotating the handle
by 1/4 turn. Using the hinge option, the covers may open to the
right or to the left.
Busbar system
The main busbar system of SIVACON S4 offers an appropriate
scaling of rated currents, matched to a rated current of up to
4000 A and short-circuit currents of standard transformers.
It is possible to set up systems with network configurations such
as TN-C, TN-S, IT and TT. Vertical distribution busbar systems
are available as cascaded versions up to 1600 A or noncascaded versions up to 2700 A.
Internal separation
Assemly kits
For open and enclosed automatic breakers, disconnectors,
SENTRON circuit breakers, modular units as well as contactors,
a wide range of dedicated kits are available. Modular adjustable
mounting plates or plates for electrotechnical use, as well as
dedicated ventilation and air-conditioning components
complete the line-up of parts for the construction of boards as
typically used at industrial facilities or for automation purposes.
The items available include a range of assembly kits for Siemens
Sentron WL and VL circuit breakers, in fixed, plug-in and
drawout versions, as well as kits with DIN rails, according to DIN
43656, for the wide range of the Beta Series modular devices.
• The components of the cubicle and the assembly kits are
made of galvanised chromed sheet.
• The components of the enclosure, such as panels and doors
are coated with slightly embossed RAL 7035 powder-paint.
• Air-conditioning components complete the line-up of
SIVACON S4 system components.
Depending on individual requirements, internal partitions are
available from form 1 to form 4.
Siemens LV 56 · 2008
2/3
SIVACON S4 Power Distribution Boards
General Data
■ Applications
Main features
2
• Type AS (TTA-TSK) power distribution boards according to
CEI EN 60439-1.
• Modular systems supplied loose (supplied as assembly kits
with individually packaged components, including fasteners;
assembly instructions for do-it-yourself installation).
• New design, ventilation and closing system.
• Slightly embossed RAL 7035 powder coating.
• Doors with universal stop.
• Degree of protection IP30, IP31, IP40, IP41, IP55
• Busbar system rated current up to 4000 A
• Busbar system short-circuit current Icw up to 100 kA (1s).
• Busbar system peak current Ipk up to 220 kA.
• Height 2000 mm
• Width 400, 600, 800, 1000, 1200 mm.
• Depth 400, 600, 800 mm.
• Kits for Sentron 3WL, 3VL, 3KA, 3KL circuit breakers, Beta
modular devices on DIN rails.
• Kits of prefabricated bars for Sentron 3WL, 3VL circuit
breakers.
• Internal separation form 1, 2, 3, 4.
• Easy design and configuration with the SCFB software tool.
Construction and testing modalities
All installation and wiring operations must be performed in
keeping with the information and data given in the catalogues
and the assembly manuals.
The installation and individual testing of the low-voltage boards
must be performed according to standards IEC 60439-1 and
CEI EN 60439-1.
Protection of the environment
To the best of our knowledge, our materials do not contain
materials in concentrations or applications prohibited by
directive 2002/95/EC (RoHs).
All the materials used are recyclable.
2/4
Siemens LV 56 · 2008
SIVACON S4 Power Distribution Boards
Quick and easy assembly
■ Exploded view
5
2
6
15
13
11
8
4
9
1
16
12
14
7
6
10
16
17
01724
18
2
3
1 Cubicle
7 Giugiaro Design glazed wall
2 Base with front covers
8 Front frame
13 Horizontal busbars
Vertical distribution busbars,
14 non-cascaded
3 Base side covers
9 Cable compartment cover
15 Real panel
4 Supporting Structure
10 Covers for equipment kits
Mounting plate for
16 Sentron VL circuit breaker
5 Blind top plate
11 Segregation for horizontal busbars
17 Blind bottom plate
6 Side panel with design
12 Segregation for vertical
distribution busbars
18 Main grounding bar PE
Siemens LV 56 · 2008
2/5
SIVACON S4 Power Distribution Boards
Technical Data
■ Overview
2
Standards and regulations
Type AS (TTA-TSK) assembled protection and circuit
breakers for low-voltage (L.V. boards)
Air clearances and creepage distances
Rated impulse withstand voltage (Uimp)
Overvoltage category
Pollution degree
IEC 60439-1, EN 60439-1
12 kV
IV
3
1, 2b, 3b,
4a, 4b
Internal separation forms
1000 V
Rated insulation voltage (Ui)
Up to
Rated operational voltage (Ue)
50/60 Hz
Rated frequency
Rated current (In) of
(3-pole and 4-pole) busbar system
Main horizontal bars
Protection of people in the event of internal arcs Type tested according to IEC 61641
Degree of protection ≤ IP40, without glazed door
Rated current
Rated peak current of busbar
system (Ipk)
Rated short-time current of
busbar system (Icw)
Up to
Up to
Rated utilisation voltage
Rated short-time current without extra kit
Length of internal arc without extra kit
Length of internal arc with extra kit
Galvanised
Epoxy resin
Cold phosphatised
Thickness of coating
20 µm
RAL 7035
min.
70 µm
Insulation class
According to IEC 61140, EN 61140
Degree of protection
According to IEC 60529, EN 60529
IP 30, IP 31, IP 40, IP 41, IP 55
Resistance to mechanical impacts
According to IEC 62262, paragraph 9.6
IP 3X
≥ IP 4X
Additional static loads on frame components
Front frame
revolving
fixed
with quick closing screws, H 50-300mm
with quick closing screws, H 350-550mm
with quick closing screws, H 600-800mm
with hinges
Internal inner door
Internal door / double door
Door module
400 V
50 kA
100 ms
300 ms
min.
Cubicle, interior components, enclosure
Coated with RAL 7035 powder
Covers
4000 A
220 kA
Up to 100 kA, 1s
Surface treatment
SK1
IK08
IK10
W 400, 600mm
W 800mm
W 1000, 1200mm
H 150-200mm
H 250-350mm
H 400-800mm
Exterior covers
Max construction weight
690 V
According to IEC 62208, paragraph 9.3, 9.4,
Type tested with static load by lifting a cubicle
1,0 kg
5,0 kg
0,5 kg
1,0 kg
2,0 kg
0,0 kg
2,5 kg
10,0 kg
5,0 kg
2,5 kg
0,5 kg
1,5 kg
3,0 kg
10,0 kg
1200 kg
Operating conditions
Ambient temperature1)
Installation altitude
35 °C
2000 m
Frame parts:
2.5 mm – Galvanised chromed sheet steel, with 25mm hole pattern according to DIN 43 660
Dimensions
Exterior dimensions
Height:
Width:
Depth:
2000 mm
400, 600, 800, 1000, 1200 mm
400, 600, 800 mm
Base
Height:
100, 200 mm
1)
For different ambient temperatures and installation altitudes, take into account the appropriate correction factors (see chapter on Planning and Configuration)
2/6
Siemens LV 56 · 2008
SIVACON S4 Power Distribution Boards
Declaration of conformity
■ Overview
2
Siemens LV 56 · 2008
2/7
SIVACON S4 Power Distribution Boards
Declaration of conformity
■ Overview
2
2/8
Siemens LV 56 · 2008
3
Standard Configurations
3/2
SIVACON S4 with Sentron 3VL
circuit breakers and modular
devices
3/3
SIVACON S4 with Sentron 3WL
circuit breakers
3/4
SIVACON S4 with Sentron 3VL
circuit breakers
3/5
SIVACON S4 with Sentron 3WL,
3VL circuit breakers and modular
devices
Siemens LV 56 · 2008
Standard Configurations
SIVACON S4 with Sentron 3VL
circuit breakers and modular devices
■ Power distribution board data
Height x Width x Depth
Height of base,
Degree of protection
Main busbar system
Vertical busbar system
Front
Internal separation
■ Assembly kit
2000mm x 1200mm x 400mm
100mm
IP55
without
cascaded 1250 A, 50kA
covers, full height door
2b
Infeed
Sentron 3VL1250, cable entry from
top, terminals for cables,
extended terminal covers
Sentron 3VL,
extended terminal covers, modular
devices
Starters
Cubicle, base, Supporting Structure, enclosures
8PQ1202-4BA02
8PQ3000-1BA38
8PQ3000-1BA43
8PQ1012-0BA01
8PQ1010-4BA01
8PQ2000-6BA04
8PQ2197-2BA14
8PQ2197-6BA14
8PQ2197-4BA05
8PQ2302-4BA04
8PQ2306-4BA05
8PQ2304-4BA05
8PQ2302-4BA01
8PQ2420-2BA01
8PQ2520-4BA01
3
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
Cubicle H2000/B1200/T400
Bottom plate partition crossbar
Exterior intermediate supporting structure
Base H100/B1200
Base side covers H100/P400
Fixed front frame H1800/B600
Cable compartment cover B200
IP55 glazed door, right/2-way interlock./H1975/B600
IP55 door, left/2-way interlock./H1975/B400
Bottom plate IP55/B200/P400
Bottom plate IP55/B600/P400
Bottom plate IP55/B400/P400
Top plate IP55/B1200/P400
Rear panel IP55/H2000/B1200
Side panel with design/H2000/P400
1
8
1
Support for vertical busbars, cascaded, 30x30
Copper busbar 30x10/L2000
Copper busbar 30x5 /L2000
Busbar system
02001
8PQ4000-0BA32
8PQ4000-0BA86
8PQ4000-0BA85
Kits for switchgear, covers, mounting plates
8PQ2020-6BA02
8PQ6000-3BA11
8PQ2060-6BA03
8PQ2020-6BA01
8PQ6000-3BA36
8PQ2015-6BA07
8PQ6000-3BA18
8PQ2020-6BA04
8PQ6000-2BA87
8PQ2025-6BA02
1
1
1
1
1
1
2
2
1
1
Instrum. cover 4X72x72 + 1 sw./H200/B600
Kit for 3VL 7, 3/4 poles, vertical/H600/P600
Cover 3VL 7 3/4 poles, vertical/H600 B600
Cover H200/B600
DIN 24UM/B600 rail assembly kit
Cover for modular elements 24UM/H150/B600
Assembly kit for 3VL 2, 3, 4 poles, horiz./H200/B600
Cover for 3VL 1 3,3, 4 poles, horiz./H200/B600
Assembly kit 3VL 4, 4 poles, horiz./H250/B600
Cover for 3VL4, horiz. fixed, remov./H250/B600
Kits for switchgear, busbar connection
8PQ6000-1BA64
8PQ6000-1BA66
2
1
Vertical busbar connection kit for 3VL 3./4p/horiz./fixed
Vertical busbar connection kit for 3VL 4 /4p/horiz./fixed
1
Vertical partition for distribution busbars, form 2b H1900/P400
1
1
1
1
1
1
SIVACON – SIEMENS cubicle ID plate
Cable anchoring brackets C30/P400 (600, 800)
Flat head square screws DIN 603 M10X55
Nuts M10 ISO 4032/M10
Clamping washer DIN 6796/10
Busbar connect. kit
cable, conductors, small parts, screws, nuts, washers with locking
edges for cable connection
Internal separation
8PQ4000-0BA06
Accessories
02003
02002
8PQ9400-0BA06
8PQ3000-0BA38
8PQ9500-1BA36
8PQ9500-0BA05
8PQ9500-0BA60
8PQ9400-0BA02
3/2
Siemens LV 56 · 2006
Standard Configurations
SIVACON S4 with Sentron 3WL circuit breakers
■ Power distribution board data
Height x Width x Depth
Height of base
Degree of protection
Main busbar system
Distribution busbar system, vertical
Front
Internal segregation
■ Assembly kit
2000mm x 2000mm x 600mm
100mm
IP30
Standard at top, 3200A, 65kA
cascaded, 2 x 1600A
panels, cover
4b
Infeed / starters
Sentron 3WL Gr. II, fixed, connection
to distribution busbars.
Cables from top/bottom
Max 12 cables per phase per M12
cable terminal
02004
Cubicle, base, Supporting structure, enclosure
8PQ1208-6BA01
8PQ1204-6BA01
8PQ3000-0BA01
8PQ3000-0BA03
8PQ1204-4BA05
8PQ1018-0BA01
8PQ1014-0BA01
8PQ1010-6BA01
8PQ2000-8BA03
8PQ2000-8BA03
8PQ2197-8BA11
8PQ2197-8BA11
8PQ2308-6BA06
8PQ2304-6BA05
8PQ2308-6BA03
8PQ2308-6BA02
8PQ2304-6BA02
8PQ2420-8BA02
8PQ2420-4BA02
8PQ2520-6BA01
2
1
2
1
2
2
1
1
2
1
2
1
1
1
1
1
1
2
1
1
Cubicle H2000/ B800/P600
Cubicle H2000/B400/P600
Interior side upright H1600/P600
Interior side upright H1800/P600, 800
Board coupling kit
Base with front covers H100/B800
Base with front covers H100/B400
Base side covers H100/P600
Fixed front frame H1600/B800
Exterior cover IP4X/H1975/B400
Finishing frame IP3X/H1975/B800
Bottom plate IP55/B800/P600
Bottom plate IP4X/cables/B800/P600
Bottom plate IP55/B400/P600
Top plate IP4X/cables/B800/P600
Top plate IP4X//B800/P600
Top plate IP4X/B400/P600
Rear panel IP4X/H2000/B800
Rear panel IP4X/H2000/B400
Side panel with design H2000/P600
2
1
1
2
2
16
16
2
Main busbars holder 3200 A
Flying support (reinforcement)
Support for grounding bar PE
Support for vertical cascaded busbar /30x40
Kit for vertic./horiz. busbars 30x40/P600, 800
Copper busbar 50x10/L2000
Copper busbar 40x10/L2000
Copper busbar 40x5 / L2000
3
Busbar system
8PQ4000-0BA04
8PQ4000-0BA37
8PQ4000-0BA82
8PQ4000-0BA63
8PQ4000-0BA74
8PQ4000-0BA18
8PQ4000-0BA17
8PQ4000-0BA80
Kits for switchgear, covers, mounting plates
8PQ6000-3BA32
8PQ2055-8BA05
8PQ2055-8BA01
8PQ2050-8BA01
2
2
2
2
Kit for 3WL11 12,3/4 poles/fixed H550/B800
Cover for 3WL12/4P/H550/B800
Cover H550/B800
Cover H500/B800
Kits for switchgear, busbar connection
8PQ6000-0BA47
8PQ6000-0BA65
2
2
prefabricated distribution bars for 3WL1232/fixed/B800
prefabricated bars to cables for 3WL 1232/fixed/B800
1
1
1
2
2
2
2
Separation form 2b, main busbars B800/P600
Separation form 2b, distribution bars H1900/P600
Separation form 2b, distribution bars H1600/P600
Partition supporting rail H1600
Separation form 3 3WL12/3-4 poles/pull-out/H550/B800
Separation form 4 3WL12/3-4 poles/vert. bars/B800
Separation form 4 3WL12/3-4 poles/cables/B800
1
3
1
2
3
3
2
2
SIEMENS SIVACON column ID plate
Busbar connection kit
Flat head screw DIN 603/M10x45
Flat head screw DIN 603/M10x65
Clamping washer DIN 6796/10
Hexagonal nut ISO4032/M10
Cable anchoring bracket
Cable anchoring bracket C30/B800
cable, conductors, small parts, screws, nuts, washers with locking
edges for cable connection
02005
Internal separation
8PQ3000-0BA54
8PQ4000-0BA03
8PQ4000-0BA07
8PQ3000-0BA82
8PQ5000-0BA10
8PQ5000-0BA21
8PQ5000-0BA38
Accessories
02006
8PQ9400-0BA06
8PQ9400-0BA02
8PQ9500-0BA16
8PQ9500-1BA25
8PQ9500-0BA60
8PQ9500-0BA05
8PQ3000-0BA73
8PQ3000-0BA43
Siemens LV 56 · 2008
3/3
Standard Configurations
SIVACON S4 with Sentron 3VL
and modular devices
■ Power distribution board data
Height x Width x Depth
Height of base
Degree of protection
Main busbar system
Distribution busbar system, vertical
Front
Internal separation
■ Assembly kit
2000mm x 1400mm x 400mm
100mm
IP55
without
non-cascaded 630 A, 15kA
covers, full height door
1
Infeed
Sentron 3VL 630, cable entry from
top, terminals for several wires,
extended terminal covers
Sentron 3VL
extended terminal covers, modular
devices
Starters
Cubicle, base, Supporting structure, enclosure
8PQ1206-4BA01
8PQ1208-4BA01
8PQ3000-1BA38
8PQ3000-1BA42
8PQ1204-4BA05
8PQ1204-4BA04
8PQ1016-0BA01
8PQ1018-0BA01
8PQ1010-4BA01
8PQ2000-6BA04
8PQ2000-2BA01
8PQ2197-8BA14
8PQ2197-6BA10
8PQ2302-4BA04
8PQ2306-4BA05
8PQ2308-4BA01
8PQ2306-4BA01
8PQ2420-8BA01
8PQ2420-6BA01
8PQ2520-4BA01
02007
3
1
1
1
1
1
1
1
1
1
2
1
1
1
1
2
1
1
1
1
1
Cubicle H2000/ B600/P400
Cubicle H2000/B800/P400
Bottom plate partition crossbar P400
Exterior intermediate upright for covers
Board coupling kit
Switchboard coupling gasket IP55
Base with front covers H100/B600
Base with front covers H100/B800
Base side covers H100/P400
Fixed front frame H1800/B600
Covers for cable compartment IP3X/H2000/B200
IP55 glazed door/right/2-way interlock./H1975/B800
IP55 glazed door/left/2-way interlock./H1975/B600
Bottom plate IP55/B200/P400
Bottom plate IP55/B600/P400
Top plate IP55/B800/P400
Top plate IP4X/B600/P400
Rear panel IP55/H2000/B800
Rear panel IP55/H2000/B600
Side panel with design H2000/P400
10
2
8
1
Main busbar holder 30x10.50mm
Exterior intermediate upright for covers
Copper busbars 30x10/L2000
Copper busbars 20x5 / L2000
Busbar system
8GF5763
8PQ3000-1BA42
8PQ4000-0BA86
8PQ4000-0BA83
Kits for switchgear, covers, mounting plates
8PQ2020-6BA02
8PQ3000-1BA56
8PQ6000-3BA05
8PQ2040-6BA08
8PQ6000-3BA18
8PQ2020-6BA04
8PQ2020-6BA12
8PQ6000-3BA36
8PQ3000-1BA61
8PQ2040-6BA01
8PQ6000-3BA22
8PQ2035-6BA03
8PQ2005-6BA01
1
1
1
1
1
1
8
8
1
1
2
2
2
Cover for 4 instruments 1 sw. 72x72 H200/B600
Blind mounting plate kit H200/B600
Assembly kit for 3VL5 3, 4 poles/vertic. H400/B600
Cover for 3VL5 3, 4 poles/vertic./fixed, rim H400/B600
Assembly kit for 3VL2 3, 4 poles/horiz./fixed/H200/B600
Cover for 3VL1 3, 4 poles/horiz./fixed H200 B600
Cover for modular devices, 1 row, 24 UM/H200/B600
Modular DIN rails kit. 1 row, 24 UM/B600
Modular mounting plate H400/B600
Cover H400/B600
Assembly kit for 3VL2 3, 4 poles/vertic./fixed/H350/B600
Cover for 3VL1 3,4 poles/vertic./fixed, remov. H350/B600
Cover H50/B600
1
1
1
1
1
SIEMENS SIVACON column ID plate
Cable anchoring brackets
Cable anchoring brackets C30/B600
Horizontal raceway fastening bracket
35mm DIN rail for terminal board L1600
cable, conductors, small parts, screws, nuts, washers with locking
edges for cable connection
Accessories
02009
02008
8PQ9400-0BA06
8PQ3000-0BA73
8PQ3000-0BA42
8PQ6000-0BA16
8PQ9600-0BA01
3/4
Siemens LV 56 · 2006
Standard Configurations
SIVACON S4 with Sentron 3WL,
Sentron 3VL and modular devices
■ Power distribution board data
Height x Width x Depth
Height of base
Degree of protection
Main busbar system
Distribution busbar system, vertical
Front
Internal separation
■ Assembly kit
2000mm x 2200mm x 600mm
100mm
IP30
without
cascaded, 1600A, 50 kA 50mm
System
covers, glazed door
4b
Infeed
Connector
Starters
Sentron 3WL Gr. I, fixed, central
connection to main busbars, cable
entry from top/bottom
Sentron 3WL, Gr. I, fixed
Sentron 3VL with rear attachments
for cable connection at rear
Modular devices
02019
Cubicle, base, Supporting structure, enclosure
8PQ1206-6BA01
8PQ1208-6BA01
8PQ3000-1BA40
8PQ3000-0BA03
8PQ3000-1BA36
8PQ3000-1BA42
8PQ1204-4BA05
8PQ1016-0BA01
8PQ1018-0BA01
8PQ1010-6BA01
8PQ2000-6BA04
8PQ2000-2BA01
8PQ2197-6BA10
8PQ2197-8BA10
8PQ2302-6BA04
8PQ2306-6BA05
8PQ2306-6BA02
8PQ2308-6BA02
8PQ2420-6BA02
8PQ2420-8BA02
8PQ2520-6BA01
1
2
2
3
2
2
2
1
2
1
3
2
1
2
2
3
1
2
1
2
1
Cubicle H2000/ B600/P600
Cubicle H2000/B800/P600
Bottom plate partition crossbar P600
Interior side upright H1800/P600, 800
Interior side upright H1800/P600
Exterior intermediate upright
Board coupling kit
Base with front covers H100/B600
Base with front covers H100/B800
Base side covers H100/P600
Fixed front frame H1800/B600
Covers for cable compartment IP3X/H2000/B200
IP55 glazed door/left/2-way interlock./H1975/B600
IP55 glazed door/left/2-way interlock./H1975/B800
Bottom plate IP55/B200/P600
Bottom plate IP55/B600/P600
Top plate IP4X/B600/P600
Top plate IP4X/B800/P600
Rear panel IP4X/H2000/B600
Rear panel IP4X/H2000/B800
Side panel with design H2000/P600
2
1
4
16
9
Support for distribution busbars, cascaded 30x40
Support for busbar PE
Support for busbars 20x5.50mm
Copper busbars 40x10/L2000
Copper busbars 20x5/L2000
3
Busbar system
8PQ4000-0BA63
8PQ4000-0BA82
8GF5762
8PQ4000-0BA17
8PQ4000-0BA83
02020
Kits for switchgear, covers, mounting plates
8PQ6000-3BA31
8PQ2055-6BA07
8PQ6000-2BA87
8PQ2025-6BA02
8PQ6000-3BA18
8PQ2020-6BA04
8PQ6000-3BA10
8PQ2035-6BA04
8PQ6000-3BA36
8PQ2020-6BA12
8PQ3000-1BA65
8PQ2040-6BA01
8PQ2060-6BA01
8PQ2030-6BA01
8PQ2025-6BA01
2
2
2
2
2
2
1
1
6
6
1
1
1
2
1
Kit for 3WL11 3, 4 poles/3WL12/3p/H550/B600
Cover for 3WL11/4p/H550/B600
Kit for 3VL4/4p/horiz./H250/B600
Cover for 3VL4/4p/horiz./fixed, remov./H250/B600
Kit for 3VL2-3, 4 poles/horiz./fixed/H200/B600
Cover for 3VL1 3, 4 poles/horiz./fixed, remov./H200/B600
Kit for 3VL5 4 poles/horiz./H350/B600
Cover for 3VL 5/4poles/horiz./fixed, remov./H350/B600
Modular DIN rails kit, 1 row, 24 UM/B600
Modular cover, 1 row, 24 UM/B600
Modular mounting plate H600/B600
Cover H400/B600
Cover H600/B600
Cover H300/B600
Cover H250/B600
Siemens LV 56 · 2008
3/5
Standard Configurations
SIVACON S4 with Sentron 3WL,
Sentron 3VL circuit breakers and modular device
Kits for switchgear, busbar connection
8PQ6000-0BA34
8PQ6000-0BA52
8PQ6000-1BA64
8PQ6000-1BA66
8PQ6000-1BA68
3
1
2
2
1
Distribution busbar connection kit for 3WL11 16/fixed/B600
Cable connection kit for 3WL11 16/fixed/B600
Distribution busbar connection kit for 3VL3/4p/horiz./fixed
Distribution busbar connection kit for 3VL4/4p/horiz./fixed
Distribution busbar connection kit for 3VL5/horiz./fixed
2
3
7
1
1
2
2
2
3
1
2
2
5
Separ. form 2b for vertical bars H1900/P600
Supporting rail for crossbars and partitions H1800
Separ. form 3, horizontal/B600
Separ. form 3, vertic./rear/H350/B600
Separ. form 3, vertic./later./H350
Separ. form 3, vertic./rear/H200/B600
Separ. form 3, vertic./later./..250A/H200
Separ. form 3, 3WL11/3, 4 poles/estraib./H550/B600
Separ. form 4, 3WL11/3, 4 poles/cables/B600
Separ. form 4, 3WL11/3, 4 poles/distribuz./B600
Separ. form 3, vertic./rear/H250/B600
Separ. form 3, vertic./later./..400..630A/H250
Protective bellows
2
2
2
2
2
1
1
SIEMENS SIVACON column ID plate
Busbar connection kit
Flat head screw DIN 603/M10x65
Clamping washer DIN 6796/10
Hexagonal nut ISO4032/M10
Cable anchoring bracket
Cable anchoring bracket C30/B800
without screws, nuts and washers with locking edges for cable connection
Internal separation
8PQ4000-0BA03
8PQ3000-0BA83
8PQ5000-2BA61
8PQ5000-2BA57
8PQ5000-2BA36
8PQ5000-2BA54
8PQ5000-2BA30
8PQ5000-0BA07
8PQ5000-0BA30
8PQ5000-0BA14
8PQ5000-2BA55
8PQ5000-2BA33
8PQ9400-0BA03
02021
3
Accessories
8PQ9400-0BA06
8PQ9400-0BA02
8PQ9500-1BA25
8PQ9500-0BA60
8PQ9500-0BA05
8PQ3000-0BA73
8PQ3000-0BA42
3/6
Siemens LV 56 · 2006
Cubicle, Supporting Structure
and Enclosure
4
4/2
General Data
4/4
Cubicles and Supporting Structure
4/8
Base
4/9
Enclosure
Siemens LV
Siemens
LV56
56· ·2008
2008
Cubicle, Supporting Structure and Enclosure
General Data
■ Overview
8
5
4
1
3
4
9
9
10
10
5
NSE0_01670
7
2
6
1 Cubicle
6 Base besides covers
2 Base with front covers
7 Bottom plate
3 Glazed door Giugiaro Design
8 Top plate
4 Rear wall
9 Supporting structure for main busbars
in standard position
10 Supporting structure for main busbars in standard position
and riser compartment 600mm + 200mm
5 Side panel with design bar
4/2
Siemens LV 56 · 2008
Cubicle, Supporting Structure and Enclosure
General Data
■ Overview
Cross section of possible combinations of cubicles, Supporting
structureand enclosures seen from above.
6
1
2 Internal cover B200
3
2
1 Supporting structure external for cover
3 Cover frame
02022
4
4 Cubicle panelling IP3X or
5
5 Door IP4X, IP55
4
6 Cubicle
6
1
2 Outer plate B200, 400 or door B400, 600
3
2
3 Cover frame
02023
4
2
1 Supporting structure external for door
4 Cubicle panelling IP3X or
5
5 Door IP4X, IP55
6 Cubicle
4
1
02024
2
2
1 Supporting structure external for door
2 Outer plate B200, 400 or door B400, 600
3
3 Modular door
4 Cubicle
Siemens LV 56 · 2008
4/3
Cubicle, Supporting Structure and Enclosure
Cubicle and supporting structure
■ Description
■ Configuration
The cubicle is a framework consisting of vertical and horizontal
sections plus the fasteners necessary to assemble them.
This provides the bearing structure support to all add-on interior
switchgear components. Stable and rugged construction is
achieved through the use of galvanised sections and self-tapping
screws. Equipotential and safe grounding of all constituent parts
are also achieved.
The values quoted below are the external dimensions.
A complete configuration is made of the following elements:
cubicle, bottom plate partition crossbar and supporting structure
for equipment heights of 1600mm or 1800mm.
To assemble two or more cubicles by width or depth, request the
board coupling kit for each coupling point.
The cubicle uprighte have holes spaced 25 mm apart for
anchoring to the base or the floor. In the upper part these holes
make it possible to fit crossbars, or eyebolts for board handling
purposes.
The installation of interior components, kits, crossbars, supporting
parts, etc., is facilitated by the presence of height, width and
depth locators.
The supporting structure is made up of a vertical section,
crossbars and fastening screws.
In cubicles of various heights and width it ensures segregation
between the equipment compartment and the busbar
compartment, partitioning the cubicles into equipment
compartments and main, or distribution, busbars compartments.
– Bottom plate partition not required
+++ Function performed by the cubicle
■ Selection and ordering data
Height
mm
Width
mm
Dept
mm
Cubicle
02027
02026
02025
Supporting strucutre
01797
4
Bottom plate
partition
1800 mm
Equipment height
1600 mm
Cubicle and supporting structure with one section
2000
400
400
8PQ1204-4BA01
–
+++
8PQ3000-0BA65
2000
600
400
8PQ1206-4BA01
–
+++
8PQ3000-0BA65
2000
800
400
8PQ1208-4BA01
–
+++
8PQ3000-0BA65
2000
1000
400
8PQ1201-4BA02
8PQ3000-1BA38
+++
8PQ3000-0BA65
2000
1200
400
8PQ1202-4BA02
8PQ3000-1BA38
+++
8PQ3000-0BA65
2000
400
600
8PQ1204-6BA01
–
8PQ3000-0BA03
8PQ3000-0BA01
2000
600
600
8PQ1206-6BA01
–
8PQ3000-0BA03
8PQ3000-0BA01
2000
800
600
8PQ1208-6BA01
–
8PQ3000-0BA03
8PQ3000-0BA01
2000
1000
600
8PQ1201-6BA02
8PQ3000-1BA40
8PQ3000-0BA03
8PQ3000-0BA01
2000
1200
600
8PQ1202-6BA02
8PQ3000-1BA40
8PQ3000-0BA03
8PQ3000-0BA01
2000
400
800
8PQ1204-8BA01
–
8PQ3000-0BA03
8PQ3000-0BA02
2000
600
800
8PQ1206-8BA01
–
8PQ3000-0BA03
8PQ3000-0BA02
2000
800
800
8PQ1208-8BA01
–
8PQ3000-0BA03
8PQ3000-0BA02
2000
1000
800
8PQ1201-8BA03
2x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-0BA02
2000
1200
800
8PQ1202-8BA02
2x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-0BA02
4/4
Siemens LV 56 · 2008
Cubicle, Supporting Structure and Enclosure
Cubicle and Supporting structure
■ Description
■ Configuration
The supporting structure external is made up of a vertical
section and the relative fasteners.
The values quoted below are the external dimensions.
The Supporting structure for internal covers constitutes a
cubicle upright that makes it possible to fit a front frame and an
interior cover in front of a cubicle part 200mm in width.
The Supporting strucutre for outer covers/door constitutes two
cubicle uprights and makes it possible to fit modular doors/a front
frame and a door/exterior cover.
A complete configuration is made up of the following elements:
cubicle, bottom plate partition crossbar, supporting structure, for
an equipment height of 1800mm or 1600mm, and an supporting
structure external for the installation of interior covers or an
exterior cover/doors.
For separation forms >1 when using 200mm, 400mm, 600mm
cubicles, as cable compartment or equipment compartment
request an additional supporting structure, see page 4/7.
A combination of supporting structure external for internal covers
and modular doors is not possible.
To assemble two or more cubicles by width or depth, request the
board coupling kit for each coupling point.
– not possible
+++ Function performed by the supporting structure external
■ Selection and ordering data
Supporting structure external
Height
mm
Width
mm
Depth
mm
Cubicle
partition
Cubicle
Bottom plate
crossbar
02030
02029
02028
02025
01797
Interior intermediate side upright
Equipment height
For upgrade
1800 mm
1600 mm
Internal covers
Door auter covers
Cubicles and Supporting structure with division into two sections
2000
800
400
600+200
8PQ1208-4BA01
8PQ3000-1BA38
+++
8PQ3000-0BA65
8PQ3000-1BA31
8PQ3000-1BA42
8PQ3000-1BA43
2000
1000
400
600+400
8PQ1201-4BA02
8PQ3000-1BA38
+++
8PQ3000-0BA65
8PQ3000-1BA31
–
8PQ3000-1BA43
2000
1000
400
800+200
8PQ1201-4BA02
8PQ3000-1BA38
+++
8PQ3000-0BA65
8PQ3000-1BA31
8PQ3000-1BA42
8PQ3000-1BA43
2000
1200
400
600+600
8PQ1202-4BA02
8PQ3000-1BA38
+++
8PQ3000-0BA65
8PQ3000-1BA31
–
8PQ3000-1BA43
2000
800
600
600+200
8PQ1208-6BA01
8PQ3000-1BA40
8PQ3000-0BA03
8PQ3000-1BA36
8PQ3000-0BA01
8PQ3000-1BA32
8PQ3000-1BA42
8PQ3000-1BA43
2000
1000
600
600+400
8PQ1201-6BA02
8PQ3000-1BA40
8PQ3000-0BA03
8PQ3000-1BA36
8PQ3000-0BA01
8PQ3000-1BA32
–
8PQ3000-1BA43
2000
1000
600
800+200
8PQ1201-6BA02
8PQ3000-1BA40
8PQ3000-0BA03
8PQ3000-1BA36
8PQ3000-0BA01
8PQ3000-1BA32
8PQ3000-1BA42
8PQ3000-1BA43
2000
1200
600
600+600
8PQ1202-6BA02
8PQ3000-1BA40
8PQ3000-0BA03
8PQ3000-1BA36
8PQ3000-0BA01
8PQ3000-1BA32
–
8PQ3000-1BA43
2000
800
800
600+200
8PQ1208-8BA01
2x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-1BA37
8PQ3000-0BA02
8PQ3000-1BA34
8PQ3000-1BA42
8PQ3000-1BA43
2000
1000
800
600+400
8PQ1201-8BA03
2x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-1BA37
8PQ3000-0BA02
8PQ3000-1BA34
–
8PQ3000-1BA43
2000
1000
800
800+200
8PQ1201-8BA03
2x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-1BA37
8PQ3000-0BA02
8PQ3000-1BA34
8PQ3000-1BA42
8PQ3000-1BA43
2000
1200
800
600+600
8PQ1202-8BA02
2x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-1BA37
8PQ3000-0BA02
8PQ3000-1BA34
–
8PQ3000-1BA43
Siemens LV 56 · 2008
4/5
4
Cubicle, Supporting Structure and Enclosure
Cubicle supporting structure
■ Description
■ Configuration
The supporting structrure external is made up of a vertical
section and the relative fasteners.
The supporting structure external of internal covers
constitutes a cubicle upright and makes it possible to fit a front
frame and an interior cover in front of a cubicle part 200mm in
width.
The supporting structure external outer cover/doors
constitutes two cubicle uprights and makes it possible to fit
externally modular doors/a front frame and a door/ cover.
The values quoted below are the external dimensions.
A complete configuration is made up of the following elements:
cubicle, bottom plate partition crossbar, side supporting structure
for an equipment height of 1800mm or 1600mm and an
intermediate upright.
The exterior intermediate upright consists of the following
combination of:
2 Supporting structure external for internal covers
or
1 Supporting structure external for internal covers and
1 intermediate upright for exterior cover/door.
or
2 Supporting structure external for outer cover/door
A combination of exterior intermediate upright for interior covers
and modular doors is not possible.
4
For separation forms >1 when using 200mm, 400mm, 600mm
cubicles, as cable compartment or equipment compartment
request an additional intermediate upright, see page 4/7.
To assemble two or more cubicles by width or depth, request the
board coupling kit.
+++ Function performed by the exterior supporting structure
■ Selection and ordering data
Width
mm
Depth Cubicle submm
division into
sections
Cubicle
Bottom plate partition crossbars
02033
02032
02031
01797
Height
mm
Equipment height
1800 mm
1600 mm
02034
Supporting structure external
Supporting structure
For upgrade
Interior covers
Modular doors/exterior covers
Cubicle and supporting structure with subdivision into three sections
2000
1000
400
200+600+200
8PQ1201-4BA02
2x 8PQ3000-1BA38 +++
8PQ3000-0BA65
8PQ3000-1BA42
2x 8PQ3000-1BA31
8PQ3000-1BA43
2000
1200
400
400+600+200
8PQ1202-4BA02
2x 8PQ3000-1BA38 +++
8PQ3000-1BA42
8PQ3000-0BA65
2x 8PQ3000-1BA31
8PQ3000-1BA43
2000
1200
400
200+800+200
8PQ1202-4BA02
2x 8PQ3000-1BA38 +++
8PQ3000-0BA65
8PQ3000-1BA42
2x 8PQ3000-1BA31
8PQ3000-1BA43
2000
1000
600
200+600+200
8PQ1201-6BA02
8PQ3000-1BA42
2x 8PQ3000-1BA40 8PQ3000-0BA03
8PQ3000-0BA01
2x 8PQ3000-1BA36 2x 8PQ3000-1BA32
8PQ3000-1BA43
2000
1200
600
400+600+200
8PQ1202-6BA02
8PQ3000-1BA42
2x 8PQ3000-1BA40 8PQ3000-0BA03
8PQ3000-0BA01
2x 8PQ3000-1BA36 2x 8PQ3000-1BA32
8PQ3000-1BA43
2000
1200
600
200+800+200
8PQ1202-6BA02
8PQ3000-1BA42
2x 8PQ3000-1BA40 8PQ3000-0BA03
8PQ3000-0BA01
2x 8PQ3000-1BA36 2x 8PQ3000-1BA32
8PQ3000-1BA43
2000
1000
800
200+600+200
8PQ1201-8BA03
8PQ3000-1BA42
4x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-0BA02
2x 8PQ3000-1BA37 2x 8PQ3000-1BA34
8PQ3000-1BA43
2000
1200
800
400+600+200
8PQ1202-8BA02
8PQ3000-1BA42
4x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-0BA02
2x 8PQ3000-1BA37 2x 8PQ3000-1BA34
8PQ3000-1BA43
2000
1200
800
200+800+200
8PQ1202-8BA02
4x 8PQ3000-1BA38 8PQ3000-0BA03
8PQ3000-0BA02
8PQ3000-1BA42
2x 8PQ3000-1BA37 2x 8PQ3000-1BA34
8PQ3000-1BA43
4/6
Siemens LV 56 · 2008
Cubicle, Supporting Structure and Enclosure
Cubicle and Supporting structure
■ Description
The supporting structure is made up of vertical and horizontal
sections and the relative fasteners.
In cubicles of different depths the supporting structure ensures
the creation of equipment and cable compartments and divides
the cubicle into equipment compartment, main or distribution
busbars compartment as well as cable compartment.
■ Configuration
For sepation forms 2, 3, 4 when using 200mm, 400mm or 600mm
cubicles, in a cubicle partitioned on the left/right as cable
compartment or equipment compartment, order an supporting
structure kit as an additional component.
1 required only for supporting structure external for internal covers
02035
02036
Supporting structure
Height
mm
Depth
mm
4
Equipment height
1800 mm
1600 mm
Supporting structure
2000
400
8PQ3000-1BA42 1
8PQ3000-1BA31
2000
600
8PQ3000-1BA36
8PQ3000-1BA32
2000
800
8PQ3000-1BA37
8PQ3000-1BA34
■ Description
The kit for coupling two or more boards by width or depth consists
of fastening plates and screws.
The board coupling gasket kit with degree of protection IP55
consists of a self-adhesive gasket roll.
.
■ Configuration
To assemble two or more cubicles by width or depth, request a
board coupling kit for each coupling point.
For a degree of protection IP55, order an IP55 board coupling
gasket kit as an additional component.
Ordering code
UI
Board coupling by width or depth kit 8PQ1204-4BA05
8PQ1204-4BA05
1
IP55 board coupling gasket 8PQ1204-4BA04
8PQ1204-4BA04
1
Board coupling kit
Siemens LV 56 · 2008
4/7
Cubicle, Supporting Structure and Enclosure
Base
■ Description
■ Configuration
The base kit is made of the following elements: corner pieces,
front covers and the relative fasteners.
Ad hoc covers to be order separately are available for the side
covers. The covers of the base are not suitable for board
transport and handling.
For each board, consisting of one or more cubicles, the “side
covers” kit must be ordered once for the H 100 base and twice
for the H 200 base.
For special situations, such as rolling, moving the cubicles on
roller an ad hoc reinforcement kit is available (that can be
applied along the width or the depth of the cubicle as a function
of the direction of movement). Base reinforcements are mounted
internally, at the front, back or side.
■ Selection and ordering data
Height
mm
Depth
mm
Ordering code
UI
1
01798
01642
Base with front covers
100
400
–
8PQ1014-0BA01
100
600
–
8PQ1016-0BA01
1
100
800
–
8PQ1018-0BA01
1
100
1000
–
8PQ1011-0BA01
1
100
1200
–
8PQ1012-0BA01
1
200
400
–
8PQ1024-0BA01
1
200
600
–
8PQ1026-0BA01
1
200
800
–
8PQ1028-0BA01
1
200
1000
–
8PQ1021-0BA01
1
200
1200
–
8PQ1022-0BA01
1
2
01643
Base covers besides
100
–
400
8PQ1010-4BA01
100
–
600
8PQ1010-6BA01
2
100
–
800
8PQ1010-8BA01
2
2
Base reinforcement
100
–
400
8PQ1014-0BA02
100
–
600
8PQ1016-0BA02
2
100
–
800
8PQ1018-0BA02
2
100
400
–
8PQ1014-0BA02
2
100
600
–
8PQ1016-0BA02
2
100
800
–
8PQ1018-0BA02
2
100
1000
–
8PQ1011-1BA01
2
100
1200
–
8PQ1012-2BA01
2
01078
01079
01644
4
Width
mm
Transport with base and lift truck
4/8
Siemens LV 56 · 2008
Transport with reinforced base and rollers
Cubicle, Supporting Structure and Enclosure
Enclosure
■ Description
■ Configuration
The front or blind covers of the various assembly kits are
anchored to a “cover frame” by means of quick locking screws
(a hinge kit can be an option to obtain a rotary cover).
A cover frame 1600 or 1800 mm high in fixed or swivel versions
is available. In the frame there is room to house the front covers
of the assembly kits. The rotary mechanism enables the frame to
be rotated over a 180° angle.
This gives full access to the interior components of the board.
The cover frame are available for 600 mm and 800 mm wide
cubicles.
Frame types available:
– H 1600 mm frame for assembly kits with built-in covers for
busbar systems in the upper part and grounding bars in the
lower part.
– H 1800 mm frame for assembly kits. For a rear upper busbar
system, the space available in the upper section is 150 mm
high and only 300 mm deep. This module can be used only
for covers and DIN rail kits for modular units.
For an exact selection, see also the notes in chapter 5 “busbar
systems”.
■ Selection and ordering data
Height for equipment
mm
Width
mm
Ordering code
1600
600
8PQ2000-6BA03
1
1600
800
8PQ2000-8BA03
1
UI
01802
Fixed cover frame for front main busbars
Fixed cover frame without or with rear main busbars
600
8PQ2000-6BA04
1
1800
800
8PQ2000-8BA04
1
01803
1800
Swivel cover frame for front main busbars
600
8PQ2000-6BA02
1
1600
800
8PQ2000-8BA02
1
01626
1600
Swivel cover frame without or with rear main busbars
600
8PQ2000-6BA01
1
800
8PQ2000-8BA01
1
01625
1800
1800
Siemens LV 56 · 2008
4/9
4
Cubicle, Supporting Structure and Enclosure
Enclosure
■ Description
■ Configuration
For 200mm wide cubicle sections, an internal cover that can be
mounted behind the door is available.
The kit is made up of a cover, an anchoring support and
fasteners. This cover must be used in conjunction with a cover
frame and can be placed behind the door.
When a 200mm section is produced in a cubicle, this section
can be placed indifferently on the left or the right side, and is
closed with an interior cover.
For use only in conjunction with an supporting structure externa
for internal covers.
■ Selection and ordering data
Height of cover
Width
mm
Degree
of protection
Ordering code
UI
200
IP30
8PQ2000-2BA01
1
Internal cover for 200mm section
■ Description
■ Configuration
A outer cover can be instead a door of 200mm and 400mm wide
compartments.
The covers can be can be mounted as desired on the front or the
back of the cubicle.
The kit includes a painted cover, a green column identification
strip, an anchoring support and the relative fasteners. This cover
must be used in conjunction with the cover frame or as an
alternative to the door.
For use only in conjunction with the supporting structure external
for outer covers/door.
■ Selection and ordering data
Height cover
Width
mm
Degree
of protection
Ordering code
UI
Cubicle height
200
IP40
8PQ2197-2BA15
1
Cubicle height
400
IP40
8PQ2197-4BA02
1
Cubicle height
200
IP55
8PQ2197-2BA14
1
Cubicle height
400
IP55
8PQ2197-4BA01
1
01663
Outer cover
■ Description
■ Configuration
For 600mm and 800mm wide cubicles with front frame, cubicle
panelling are available as an alternative to doors.
For use only in conjunction with a front frame.
Only for 600mm and 800mm wide cubicles.
With its thickness, the finishing frame ensures the same height
as an adjacent door, as well as the same height of the cover of
the uprights of the galvanised chromed cubicle.
Cubicle panelling, covers and finishing frame achieve a degree
of protection of IP30/31.
■ Selection and ordering data
Height
Width
mm
Degree
of protection
Ordering code
UI
Cubicle height
600
IP30
8PQ2197-6BA11
1
Cubicle height
800
IP30
8PQ2197-8BA11
1
Cubicle panelling
01636
4
01799
Cubicle height
4/10
Siemens LV 56 · 2008
Cubicle, Supporting Structure and Enclosure
Enclosure
■ Description
■ Configuration
The SIVACON S4 door kit is made up of Giugiaro Design glazed
doors or metal plate doors, a green column identification strip,
hinges and preassembled bar lock closing system with two-way
interlocking mechanism.
Standard version doors use a 3mm two-way interlocking system.
The two-way interlocking mechanism can be replaced with a
rotary handle (standard doors are not suitable for semicylindrical profiles).
In cubicles with degree of protection IP40 the top plate, the
doors and the rear wall must have the same degree of
protection.
The doors can be mounted indifferently to the front or back of the
cubicle.
Thanks to the new hinge and locking system, the door hinges
can be fitted either on the left or the right.
The position of the hinges can be easily modified at a later stage.
If it is deemed necessary to fit a closing system with rotary
handle and semi-cylindrical profile with security key, on account
of cylinder depth, a series of dedicated doors with right or left
side hinges are available.
■ Selection and ordering data
4
Door type
Door height Door width
mm
mm
Degree of
protection
Hinge position
Ordering code
UI
1
01634
01633
01635
Cubicle door with two-way interlocking system
Finned plate door
1975
400
IP40
left
8PQ2197-4BA08
Finned plate door
1975
600
IP40
left
8PQ2197-6BA06
1
Finned plate door
1975
800
IP40
left
8PQ2197-8BA06
1
Finned plate door
1975
1000
IP40
left
8PQ2197-1BA06
1
Finned plate door
1975
400
IP40
right
8PQ2197-4BA11
1
Finned plate door
1975
600
IP40
right
8PQ2197-6BA13
1
Finned plate door
1975
800
IP40
right
8PQ2197-8BA13
1
Finned plate door
1975
1000
IP40
right
8PQ2197-1BA18
1
Plate door
1975
400
IP55
left
8PQ2197-4BA05
1
Plate door
1975
600
IP55
left
8PQ2197-6BA03
1
Plate door
1975
800
IP55
left
8PQ2197-8BA03
1
Plate door
1975
1000
IP55
left
8PQ2197-1BA03
1
Plate door
1975
400
IP55
right
8PQ2197-4BA10
1
Plate door
1975
600
IP55
right
8PQ2197-6BA12
1
Plate door
1975
800
IP55
right
8PQ2197-8BA12
1
Plate door
1975
1000
IP55
right
8PQ2197-1BA17
1
Glazed door
1975
600
IP55
left
8PQ2197-6BA10
1
Glazed door
1975
800
IP55
left
8PQ2197-8BA10
1
Glazed door
1975
1000
IP55
left
8PQ2197-1BA10
1
Glazed door
1975
600
IP55
right
8PQ2197-6BA14
1
Glazed door
1975
800
IP55
right
8PQ2197-8BA14
1
Glazed door
1975
1000
IP55
right
8PQ2197-1BA20
1
Siemens LV 56 · 2008
4/11
Cubicle, Supporting Structure and Enclosure
Enclosure
■ Description
■ Configuration
The SIVACON S4 door kit is made up of Giugiaro Design glazed
doors or metal doors, a green column identification strip, hinges
and preassembled bar lock closing system with rotary handle
mechanism for semi-cylindrical profile.
Standard version doors use a two-way interlocking mechanism.
Semi-cylindrical profile: see chapter s10 “Accessories”.
The doors can be mounted indifferently to the front or back of the
cubicle.
The hinges for double doors are hooked onto the cubicle
externally.
The double doors of 1000mm wide cubicles are split into a
600mm left section and a 400mm right section. Opening
sequence: right and then left.
The double doors of 1200mm wide cubicles are split 50/50.
Opening sequence: right and then left.
■ Selection and ordering data
Door type
Door height Door width
mm
mm
Degree of
protection
Hinge position
Ordering code
UI
01806
01805
01804
Door with rotary handle for semi-cylindrical profile DIN 18252/18254, 8 x 45°
Finned plate door
1975
400
IP40
left
8PQ2197-4BA06
1
Finned plate door
1975
600
IP40
left
8PQ2197-6BA04
1
Finned plate door
1975
800
IP40
left
8PQ2197-8BA04
1
Finned plate door
1975
1000
IP40
left
8PQ2197-1BA07
1
Finned plate door
1975
400
IP40
right
8PQ2197-4BA07
1
Finned plate door
1975
600
IP40
right
8PQ2197-6BA05
1
Finned plate door
1975
800
IP40
right
8PQ2197-8BA05
1
Finned plate door
1975
1000
IP40
right
8PQ2197-1BA08
1
Plate door
1975
400
IP55
left
8PQ2197-4BA03
1
Plate door
1975
600
IP55
left
8PQ2197-6BA01
1
Plate door
1975
800
IP55
left
8PQ2197-8BA01
1
Plate door
1975
1000
IP55
left
8PQ2197-1BA04
1
Plate door
1975
400
IP55
right
8PQ2197-4BA04
1
Plate door
1975
600
IP55
right
8PQ2197-6BA02
1
Plate door
1975
800
IP55
right
8PQ2197-8BA02
1
Plate door
1975
1000
IP55
right
8PQ2197-1BA05
1
Glazed door
1975
600
IP55
left
8PQ2197-6BA07
1
Glazed door
1975
800
IP55
left
8PQ2197-8BA07
1
Glazed door
1975
1000
IP55
left
8PQ2197-1BA11
1
Glazed door
1975
600
IP55
right
8PQ2197-6BA08
1
Glazed door
1975
800
IP55
right
8PQ2197-8BA08
1
Glazed door
1975
1000
IP55
right
8PQ2197-1BA12
1
Double door with two-way interlocking mechanism
1975
1000
IP40
–
8PQ2197-1BA14
1
Finned plate door
1975
1200
IP40
–
8PQ2197-2BA11
1
Plate door
1975
1000
IP55
–
8PQ2197-1BA13
1
Plate door
1975
1200
IP55
–
8PQ2197-2BA10
1
01696
Finned plate door
Double door with rotary handle for semi-cylindrical profile
Finned plate door
1975
1000
IP40
–
8PQ2197-1BA16
1
Finned plate door
1975
1200
IP40
–
8PQ2197-2BA13
1
Plate door
1975
1000
IP55
–
8PQ2197-1BA15
1
Plate door
1975
1200
IP55
–
8PQ2197-2BA12
1
01698
4
In cubicles with degree of protection IP40, the top plate, the
doors and the rear wall must have the same degree of
protection.
4/12
Siemens LV 56 · 2008
Cubicle, Supporting Structure and Enclosure
Enclosure
■ Description
■ Configuration
The inner door kit includes a door and hinges. The inner door is
mounted behind the main cubicle door and in front of the largesized mounting plate for electrotechnical applications.
The inner door requires a depth of 30 mm and cannot be used
in conjunction with a cover frame.
■ Selection and ordering data
Height
Width
mm
Ordering code
UI
Inner door
600
8PQ2000-6BA05
1
Cubicle height
800
8PQ2000-8BA05
1
Cubicle height
1000
8PQ2000-1BA01
1
01699
Cubicle height
4
Siemens LV 56 · 2008
4/13
Cubicle, Supporting Structure and Enclosure
Enclosure
■ Description
■ Configuration
Bottom plates are available with degree of protection IP55
without cable entry opening and with degree of protection IP40
with variable cable entry opening.
For 800mm wide cubicles, order two 400mm deep bottom
plates.
For 800mm, 1000mm, 1200mm wide cubicles, bottom plate
selection depends on the combination of variants
corresponding to cubicle subdivision.
■ Selection and ordering data
Width
mm
Depth
mm
Degree
of protection
Ordering code
UI
200
400
IP55
8PQ2302-4BA04
1
400
400
IP55
8PQ2304-4BA05
1
600
400
IP55
8PQ2306-4BA05
1
800
400
IP55
8PQ2308-4BA05
1
200
600
IP55
8PQ2302-6BA04
1
400
600
IP55
8PQ2304-6BA05
1
600
600
IP55
8PQ2306-6BA05
1
800
600
IP55
8PQ2308-6BA05
1
400
400
IP40
8PQ2304-4BA06
1
600
400
IP40
8PQ2306-4BA06
1
800
400
IP40
8PQ2308-4BA06
1
400
600
IP40
8PQ2304-6BA06
1
600
600
IP40
8PQ2306-6BA06
1
800
600
IP40
8PQ2308-6BA06
1
Bottom plate without cable entry
01631
4
Bottom plate with variable cable entry
01632
1) Lieferbar ab 02/2007.
4/14
Siemens LV 56 · 2008
Cubicle, Supporting Structure and Enclosure
Enclosure
■ Description
■ Configuration
Top plates are available with degree of protection IP55 and IP40
without cable entry opening. A version with degree of protection
IP40 with variable cable entry opening is also available. The top
plates with degree of protection IP55 are secured with screws on
one side and snap into the board structure on the other. By
means of a further upgrade, degree of protection IPX1 can be
achieved.
For cubicles with degree of protection IP 40, the top plates, the
bottom plates, the doors and the panels must have the same
degree of protection IP 40.
With the IPX1 upgrade, cubicles with degree of protection IP30
and IP40 can achieve degree of protection IP31 and IP41
respectively. Column height is increased by 62 mm.
■ Selection and ordering data
Width
mm
Depth
mm
Degree
of protection
Ordering code
UI
400
400
400
600
600
600
800
800
800
1000
1000
1000
1200
1200
1200
400
400
400
600
600
600
800
800
800
1000
1000
1000
1200
1200
1200
400
600
800
400
600
800
400
600
800
400
600
800
400
600
800
400
600
800
400
600
800
400
600
800
400
600
800
400
600
800
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP55
IP55
IP55
IP55
IP55
IP55
IP55
IP55
IP55
IP55
IP55
IP55
IP55
IP55
IP55
8PQ2304-4BA02
8PQ2304-6BA02
8PQ2304-8BA02
8PQ2306-4BA02
8PQ2306-6BA02
8PQ2306-8BA02
8PQ2308-4BA02
8PQ2308-6BA02
8PQ2308-8BA02
8PQ2301-4BA02
8PQ2301-6BA02
8PQ2301-8BA02
8PQ2302-4BA02
8PQ2302-6BA02
8PQ2302-8BA02
8PQ2304-4BA01
8PQ2304-6BA01
8PQ2304-8BA01
8PQ2306-4BA01
8PQ2306-6BA01
8PQ2306-8BA01
8PQ2308-4BA01
8PQ2308-6BA01
8PQ2308-8BA01
8PQ2301-4BA01
8PQ2301-6BA01
8PQ2301-8BA01
8PQ2302-4BA01
8PQ2302-6BA01
8PQ2302-8BA01
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
400
400
400
600
600
600
800
800
800
400
600
800
400
600
800
400
600
800
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP40
IP40
8PQ2304-4BA03
8PQ2304-6BA03
8PQ2304-8BA03
8PQ2306-4BA03
8PQ2306-6BA03
8PQ2306-8BA03
8PQ2308-4BA03
8PQ2308-6BA03
8PQ2308-8BA03
1
1
1
1
1
1
1
1
1
400
400
400
600
600
600
800
800
800
1000
1000
1000
1200
1200
1200
400
600
800
400
600
800
400
600
800
400
600
800
400
600
800
IPX1
IPX1
IPX1
IPX1
IPX1
IPX1
IPX1
IPX1
IPX1
IPX1
IPX1
IPX1
IPX1
IPX1
IPX1
8PQ2304-4BA04
8PQ2304-6BA04
8PQ2304-8BA04
8PQ2306-4BA04
8PQ2306-6BA04
8PQ2306-8BA04
8PQ2308-4BA04
8PQ2308-6BA04
8PQ2308-8BA04
8PQ2301-4BA03
8PQ2301-6BA03
8PQ2301-8BA03
8PQ2302-4BA03
8PQ2302-6BA03
8PQ2302-8BA03
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Top plate without cable entry
01628
01627
Top plate with cable entry
01630
Top plate upgrade for IPX1
01629
Siemens LV 56 · 2008
4/15
4
Cubicle, Supporting Structure and Enclosure
Enclosure
■ Description
■ Configuration
Rear panels are available with degrees of protection IP40 and
IP55. Rear panels with degree of protection IP40 are galvanised
chromed, and those with degree of protection IP55 are slightly
embossed, RAL 7035 powder-coated.
For cubicles with degree of protection IP 40, the top plates, the
bottom plates, the doors and the rear panels must have the
same degree of protection IP 40.
■ Selection and ordering data
Width
mm
Depth
mm
Degree
of protection
Ordering code
UI
2000
2000
400
IP40
8PQ2420-4BA02
1
600
IP40
8PQ2420-6BA02
1
2000
800
IP40
8PQ2420-8BA02
1
2000
1000
IP40
8PQ2420-1BA02
1
2000
1200
IP40
8PQ2420-2BA02
1
2000
400
IP55
8PQ2420-4BA01
1
2000
600
IP55
8PQ2420-6BA01
1
2000
800
IP55
8PQ2420-8BA01
1
2000
1000
IP55
8PQ2420-1BA01
1
2000
1200
IP55
8PQ2420-2BA01
1
01637
■ Description
■ Configuration
The side panels are powder-coated and are available with
degree of protection IP 55, with or without Design bar.
For each board, order one kit of side panels.
■ Selection and ordering data
Width
mm
Depth
mm
Degree
of protection
Ordering code
UI
2000
400
IP55
8PQ2520-4BA01
2
2000
600
IP55
8PQ2520-6BA01
2
2000
800
IP55
8PQ2520-8BA01
2
2000
400
IP55
8PQ2520-4BA02
2
2000
600
IP55
8PQ2520-6BA02
2
2000
800
IP55
8PQ2520-8BA02
2
01640
Side panel with design
Side panel without design
01639
4
01789
Rear panel
4/16
Siemens LV 56 · 2008
5
Busbar System
5/2
General Data
5/3
Main busbar system
5/7
Vertical distribution busbar
system
5/11
Compact busbar systems
5/13
Copper bars
5/14
Busbar connection fasteners
Siemens LV
Siemens
LV56
56· ·2008
2008
Busbar System
General Data
■ Overview
4
1
5
2
4
5
1 System of main busbar with
rectangular profile
2 Main busbar extension kit
01676
3 Grounding bar PE
3
4 Busbar holder
5 Reinforcement
5/2
Siemens LV 56 · 2008
Busbar System
Main busbar system
■ Technical specifications
Admissible rated current for main busbar systems
No. of bars per phase
Dimensions
[mm]
20 × 10
30 × 10
20 × 10
30 × 10
40 × 10
50 × 10
20 × 10
30 × 10
2
2
4
4
4
4
2×4
2×4
Rated current at an ambient temperature of 35 °C
Depth of cubicle 400mm
IP ≤ IP41
1190
1630
1920
2460
2980
3220
IP 55
965
1310
1420
1790
2150
2330
Depth of cubicle 600mm
IP ≤ IP41
1190
1630
1920
2490
3040
3320
IP 55
965
1310
1540
1950
2350
2570
Depth of cubicle 800mm
IP ≤ IP41
1190
1630
1930
2510
3100
3410
3700
4660
IP 55
965
1310
1650
2110
2560
2820
3000
3680
These values refer to normal operating conditions and indoor installation in accordance with IEC 60439-1, in particular, at an ambient temperature of 35°C (24h average).
In different operating conditions, the correction factors given in the “Planning and Configuration” chapter have to be taken into account.
Cross-sections for PE conductor
No. of bars
Dimensions
[mm]
Icw
1s
2
20 × 5
2
30 × 5
85 kA
2
40 × 5
100 kA
2
30 × 10
100 kA
65 kA
5
The cross-sections specified for PE conductors were type tested according to IEC 60439-1. According to IEC 60439-1 a PE conductor cross-section corresponding to
25% the cross-section of main conductors is also admissible.
Determination of the number of reinforcements as a function of short-circuit current and cubicle width
Busbar cross-section
No of bars
2
Dimensions
[mm]
20 × 10
2
30 × 10
4
20 × 10
4
30 × 10
4
40 × 10
4
50 × 10
2×41
20 × 10
2×41
30 × 10
No. of reinforcements as a function of Ipk, Icw and cubicle width
Width [mm]
400
600
800
1000
1200
400
600
800
1000
1200
400
600
800
1000
1200
400
600
800
1000
1200
400
600
800
1000
1200
400
600
800
1000
1200
400
600
800
1000
1200
400
600
800
1000
1200
Icw = 25 kA
Ipk = 52,5 kA
0
0
1
1
2
Icw = 35 kA
Ipk = 73,5 kA
0
0
1
1
2
0
0
1
1
2
0
0
1
2
2
0
0
1
2
2
Icw = 50 kA
Ipk = 105 kA
0
1
1
2
2
0
0
1
2
2
0
0
1
2
2
0
0
1
1
2
0
0
1
1
2
Icw = 65 kA
Ipk = 143 kA
Icw = 85 kA
Ipk = 187 kA
Icw = 100 kA
Ipk = 220 kA
0
1
2
3
3
0
1
2
3
3
0
0
1
1
2
0
0
1
1
2
0
1
2
3
4
0
1
2
3
4
0
1
2
3
3
0
1
2
3
3
0
1
2
3
3
0
1
2
3
4
0
1
2
3
4
0
1
2
3
4
0
1
2
3
4
0
1
2
3
4
0
1
2
3
4
1) The number of reinforcements applies to a main busbar system. Since the 3700 A and 4000 A main busbar system is made up of two systems mounted in parallel,
the number of reinforcements to be ordered must be doubled.
For the determination of the distances between busbar holders and reinforcements, refer to the SIVACON S4 Manual.
Siemens LV 56 · 2008
5/3
Busbar System
Main busbar system
■ Description
The main busbar system of SIVACON S4 offers an appropriate
scaling of rated currents, matched to the rated currents of
standard version circuit breakers and transformers.
The busbar holders have been designed for the use of
rectangular copper profiles.
By using 2, 4 or 8 sub-conductors per phase, it is possible to
achieve high resistance to short-circuits and make the
connections without having to drill holes. This arrangement also
simplify handling of one or more cubicles.
The main horizontal busbar system provides for a variety of
network configurations such as TN-C, TN-S, IT and TT.
The connection of the PE bar to the cubicle is type-tested
(resistance to short-circuits) and ensures a safe transfer of fault
currents to the cubicle.
For TN-C network systems, a type-tested connection (PEN
jumper) between the PEN bar and the cubicle is available.
■ Configuration
01702
SIVACON S4 main busbar system in standard position
- Installation position: front top
- Cubicle depth 600 mm
- Rated current up to 3200 A
- Side upright for 1600mm high modules
- Front frame for 1600mm high modules
01703
01704
SIVACON S4 main busbar system in standard position
- Installation position: front rear
- Cubicle depth 800 mm
- Rated current up to 3200 A
- Side upright for 1600mm high modules
- Front frame for 1600mm high modules or
- Front frame for 1800mm high modules mm; the 150mm high upper module must be used only to fit the front cover
01705
SIVACON S4 main busbar system in standard position
- Installation position: front top and rear (double upper system)
- Cubicle depth 800 mm
- Rated current up to 4000 A
- Side upright for 1600mm high modules
- Front frame for 1600mm high modules
01701
SIVACON S4 main busbar system in standard position
- Installation position: front top
- Cubicle depth 400 mm
- Rated current up to 3200 A
- Side upright for 1600mm high modules
- Front frame for 1600mm high modules
01692
SIVACON S4 main busbar system in optional position
- Installation position: at different heights at rear
- Cubicle depth 800 mm
- Rated current up to 3200 A
- Side upright for 1800 mm high modules
- Front frame for 1800 mm high modules
- To position the busbars at an optional height other than in the upper part of the cubicle, order two 350mm long crossbars per
cubicle
01706
Main busbar system with PEN jumper
- The PEN jumper establishes the connection between the PEN bar and the cubicle. 1 PEN jumper per cubicle is required
PE bar connection
- The connection of the PE bar to the cubicle is included in the main busbar kit
01710
5
SIVACON S4 main busbar system in standard position
- Installation position: front top
- Cubicle depth 800 mm
- Rated current up to 3200 A
- Side upright for 1600mm high modules
- Front frame for 1600mm high modules
5/4
Siemens LV 56 · 2008
Busbar System
Main busbar systems
■ Selection and ordering data
1
1
1
1
1
2
1
1
2
1
2
1
2
1
2
02038
02037
2
Single-cubicle transport unit
1
Main busbar holder
2
Reinforcement
Multi-cubicle transport unit
The number of reinforcements to be used depends on the value of the short-circuit current and cubicle width.
The additional internal arc protection kit is required for arcing times of between 100 ms and 300 ms. Order one kit per side panel.
■ Selection and ordering data
Dimensions
mm × mm
Ordering code
UI
8PQ4000-0BA04
2
20 × 10, 30 × 10, 40 × 10, 50 × 10
8PQ4000-0BA60
2
20 × 10, 30 × 10, 40 × 10, 50 × 10
8PQ4000-0BA37
1
8PQ9400-0BA21
2
5
Main busbar holder kit up to 3200 A, with PE grounding bar connection to cubicle
01685
20 × 10, 30 × 10, 40 × 10, 50 × 10
01686
Main busbar holder kit up to 4000 A, with PE grounding bar connection to cubicle
01687
Busbar reinforcement kit
02039
Additional internal arc protection kit
Siemens LV 56 · 2008
5/5
Busbar System
Main busbar system
■ Selection and ordering data
Dimensions
mm × mm
Ordering code
UI
01674
Main busbars extension kit for L1, L2, L3, N or PEN1
20 × 10
8PQ4000-0BA53
4
30 × 10
8PQ4000-0BA54
4
40 × 10
8PQ4000-0BA56
4
50 × 10
8PQ4000-0BA57
4
20 × 5, 30 × 5, 30 × 10
8PQ4000-0BA52
2
40 × 5, 40 × 10, 50 × 10
8PQ4000-0BA67
2
8PQ4000-0BA62
1
8PQ4000-0BA12
10
8PQ4000-0BA82
6
01673
Extension kit for PE grounding bar
01790
–
PEN jumper for main busbar system1
01706
–
PE bar connection to cubicle (accessory)
–
01710
5
Connection kit for double main busbar system 1
(order 1 per cubicle; cannot be installed in 400mm wide cubicles)
1) Without screws, washers and nuts.
5/6
Siemens LV 56 · 2008
Busbar System
Vertical distribution busbar system
Cascaded distribution busbar system with profiled
busbars
Double arrangement, side-by-side
Cascaded distribution busbar system with rectangular bars
Double arrangement, aligned
02042
Non-cascaded distribution busbars system with
regular busbars
Single arrangement
02045
Cascaded distribution busbar system with rectangular bars
Single arrangement
02044
02043
Cascaded distribution busbar system with profiled
busbars
Single arrangement
02041
02040
■ Overview
Non-cascaded distribution busbar system with
rectangular bars
Double arrangement, aligned
Siemens LV 56 · 2008
5/7
5
Busbar System
Vertical distribution busbar system
■ Technical specifications
Admissible rated current values for cascaded vertical distribution busbars
The rated sort-time current Icw for a cascaded vertical
busbar system is determined on the basis of no. of busbars,
No. of bars per phase
Dimensions
[mm]
Admissible current for
a temperature of 35 °C
IP ≤ IP41
1
1
2
2
Profiled busbar
Profiled busbar
2x2
2x2
2 x Profiled busbar
2 x Profiled busbar
30 × 10
40 × 10
30 × 10
40 × 10
30 × 30
40 × 30
30 × 10
40 × 10
30 × 30
40 × 30
busbar size and shape, and the number of busbar
holders.
922
1100
1530
1651
1289
1518
3060
3302
2578
3036
IP 55
837
980
1337
1543
1066
1217
2674
3086
2132
2434
No. of holders per cubicle and per system
Icw = 25 kA
Ipk = 52,5 kA
4
4
4
4
4
4
Icw = 35 kA
Ipk = 73,5 kA
4
4
4
4
4
4
Icw = 50 kA
Ipk = 105 kA
4
4
4
4
4
4
4
4
Icw = 65 kA
Ipk = 143 kA
5
5
5
5
5
5
5
5
Icw = 85 kA
Ipk = 187 kA
8
8
8
8
These values refer to normal operating conditions and indoor installation in accordance with IEC 60439-1, in particular, at an ambient temperature of 35°C (24h average).
In different operating conditions, the correction factors given in the “Planning and Configuration” chapter have to be taken into account.
5
Admissible rated current values for non-cascaded vertical distribution busbars
The rated sort-time current Icw of a non-cascaded vertical
busbar system is determined on the basis of no. of busbars,
busbar size, and number of reinforcements.
No. of bars per phase
Dimensions
[mm]
Admissible current for a
temperature of 35 °C
IP ≤ IP41
20 × 10
30 × 10
20 × 10
30 × 10
40 × 10
50 × 10
2
2
4
4
4
4
For each cubicle, order one kit (3 pcs.) of non-cascaded busbar
holders.
1010
1390
1630
2091
2533
2737
IP 55
820
1110
1207
1520
1825
1980
No. of reinforcements per cubicle
Icw = 25 kA
Ipk = 52 kA
0
0
0
0
0
0
Icw = 35 kA
Ipk = 73 kA
0
0
0
0
0
0
Icw = 50 kA Icw = 65 kA Icw = 85 kA Icw = 100 kA
Ipk = 105 kA Ipk = 143 kA Ipk = 187 kA Ipk = 220 kA
2
2
2
0
0
2
2
2
2
2
2
2
4
4
These values refer to normal operating conditions and indoor installation in accordance with IEC 60439-1, in particular, at an ambient temperature of 35°C (24h
average).
In different operating conditions, the correction factors given in the “Planning and Configuration” chapter have to be taken into account.
5/8
Siemens LV 56 · 2008
Busbar System
Vertical distribution busbar system
■ Configuration
Cascaded vertical distribution busbar system
For profiled busbars, the connections are made by
means of T-head screws. When using rectangular busbars,
the connections are made by means of screws
and connection kits.
■ Selection and ordering data
Busbar dimensions
mm × mm
Busbar shape
Cubicle
width
mm
Cubicle
depth
mm
Position of
main busbars
Position of
vertical distribution busbars
Ordering code
UI
01690
Busbar holder kit for cascaded vertical distribution busbars
40 × 30
Profiled busbar
200
–
–
–
8PQ4000-0BA63
4
40 × 10
Rectangular
busbar
200
–
–
–
8PQ4000-0BA63
4
30 × 30
Profiled busbar
200
–
–
–
8PQ4000-0BA32
4
30 × 10
Rectangular
busbar
200
–
–
–
8PQ4000-0BA32
4
20 × 10, 30 × 10, 40 × 10, 50 × 10 Rectangular
busbar
200
–
–
–
8PQ4000-0BA77
3
20 × 10, 30 × 10, 40 × 10, 50 × 10 Rectangular
busbar
400
–
–
–
8PQ4000-0BA31
3
–
–
–
–
8PQ4000-0BA37
1
01688
Busbar holder kit for non-cascaded vertical distribution busbars
Busbar reinforcement kit
01687
20 × 10, 30 × 10, 40 × 10, 50 × 10 Rectangular
busbar
End support for non-cascaded vertical busbars
–
200
–
–
–
8PQ4000-0BA78
1
–
400
–
–
–
8PQ4000-0BA61
1
–
–
–
–
8PQ4000-0BA11
4
01689
–
–
Anchoring support for N or PE bars in cable compartment
–
01707
–
Siemens LV 56 · 2008
5/9
5
Busbar System
Vertical distribution busbar system
■ Selection and ordering data
Bus bar dimensions
mm × mm
Busbar shape
Cubicle
width
mm
Cubicle
depth
mm
Position of
main busbars
Position of
vertical distribution busbars
Ordering code
UI
01718
Connection kit between cascaded vertical busbars/horizontal busbars 1
30 × 30, 30 × 10
–
–
400
front
right
8PQ4000-0BA45
1
40 × 30, 40 × 10
–
–
400
front
right
8PQ4000-0BA47
1
30 × 30, 30 × 10
–
–
600, 800 front
right
8PQ4000-0BA46
1
40 × 30, 40 × 10
–
–
600, 800 front
right
8PQ4000-0BA48
1
30 × 30, 30 × 10
–
–
800
rear
right
8PQ4000-0BA50
1
40 × 30, 40 × 10
–
–
800
rear
right
8PQ4000-0BA51
1
30 × 30, 30 × 10
–
–
400
front
left
8PQ4000-0BA73
1
40 × 30, 40 × 10
–
–
400
front
left
8PQ4000-0BA75
1
30 × 30, 30 × 10
–
–
600, 800 front
left
8PQ4000-0BA72
1
40 × 30, 40 × 10
–
–
600, 800 front
left
8PQ4000-0BA74
1
30 × 30, 30 × 10
–
-
800
rear
left
8PQ4000-0BA70
1
40 × 30, 40 × 10
–
-
800
rear
left
8PQ4000-0BA71
1
Connection kit between non-cascaded vertical busbars/horizontal busbars1
01675
5
20 × 10, 30 × 10
–
–
400
front
–
8PQ4000-0BA38
1
40 × 10, 50 × 10
–
–
400
front
–
8PQ4000-0BA41
1
20 × 10, 30 × 10
–
–
600, 800 front
–
8PQ4000-0BA40
1
40 × 10, 50 × 10
–
–
600, 800 front
–
8PQ4000-0BA42
1
20 × 10, 30 × 10
–
–
800
rear
–
8PQ4000-0BA43
1
40 × 10, 50 × 10
–
–
800
rear
–
8PQ4000-0BA44
1
–
–
–
–
–
8PQ9400-0BA02
20
Busbar clamp kit for M10 screw
01743
–
1) without screws, washers and nuts
5/10
Siemens LV 56 · 2008
Busbar System
Compact busbar system
■ Overview
Compact busbar systems may be arranged as desired with uprights and crossbars.
5
5
4
5
3
2
02047
02046
1
Compact busbar systems 8GF57
non-cascaded, anchored to crossbars
1
Non-cascaded busbar support
2
Cascaded busbar support
3
Crossbars for anchoring width-wise
4
Crossbars for anchoring depth-wise
5
Supporting structure
Compact busbar systems 8GF57
cascaded, anchored to crossbars
Siemens LV 56 · 2008
5/11
Busbar System
Compact busbar system
■ Technical specifications
Admissible rated current for copper busbars, for an ambient temperature of 35 °C according to DIN 43671
No. of busbars
Rated current at a temperature of
Dimensions
[mm]
65 °C
85 °C
Holder spacing [mm]
Icw = 5 kA
105 °C
Icw = 10 kA
Icw = 15 kA
Icw = 20 kA
Icw = 25 kA
1
15 × 5
222
293
349
600
400
1
20 × 5
274
362
430
600
600
1
30 × 5
379
500
595
600
600
450
352
300
1
30 × 10
573
756
900
600
600
400
300
250
■ Description
Compact busbar systems are used for the distribution of
currents up to 630A and rated short-time currents Icw upto 25
kA.
400
■ Configuration
Compact busbar systems, with pole centre distance of 50mm,
can be used in conjunction with the rapid wiring assembly
system for modular devices SIKclip.
For compact busbar systems, with pole centre distance of
60mm, a wide range of adapters for SIRIUS, SENTRON 3VL is
available together with many other accessories.
■ Selection and ordering data
Description
5
No. of
poles
Busbar dimensions
mm × mm
Busbar shape
Arrangement
Ordering code
UI
Busbar holder
4
15 × 5, 20 × 5, 30 × 5
Rectangular
non-cascaded
8GF5762
1
Busbar holder
4
30 × 10
Rectangular
non-cascaded
8GF5763
1
Busbar holder
4
15 × 5, 20 × 5, 30 × 5
Rectangular
cascaded
8GF5760
1
Busbar holder
4
30 × 10
Rectangular
cascaded
8GF5761
1
02049
02048
Compact busbar system, 50mm pole centre distance
Compact busbar holder system, 60mm pole centre distance
3
15 × 5, 20 × 5, 30 × 5, 30 × 10
Rectangular
non-cascaded
8US1923-3AA01
1
Busbar holder
4
15 × 5, 20 × 5, 30 × 5, 30 × 10
Rectangular
non-cascaded
8US1923-4AA00
1
Busbar holder end cover
3
–
–
–
8US1922-1AC00
1
Busbar holder end cover
4
–
–
–
8US1922-1AB00
1
Busbar cover section
–
20 × 5, 30 × 5
Rectangular
–
8US1922-2AA00
1
Busbar cover section
–
20 × 10, 30 × 10
Rectangular
–
8US1922-0BA00
1
Bild 5-9 BUS 2
Bild 5-9 BUS 1
Busbar holder
Bild 5-9 BUS 3
5/12
Siemens LV 56 · 2008
Busbar System
Copper bars
■ Selection and ordering data
Dimensions
mm × mm
Threading
Current
A
∆T
K
Length
mm
Ordering code
UI
15 × 5
M6
–
–
2000
8GF5751
1
20 × 5
M6
–
–
2000
8GF5737
1
30 × 5
M6
–
–
2000
8GF5742
1
40 × 5
for M10
–
–
2000
8PQ4000-0BA81
1
60 × 5
for M10
–
–
1750
8PQ4000-1BA05
1
80 × 5
for M10
–
–
2000
8PQ4000-1BA06
1
100 × 5
for M10
–
–
2000
8PQ4000-1BA07
1
30 × 10
for M10
–
–
2000
8GF5752
1
40 × 10
for M10
–
–
2000
8PQ4000-0BA24
1
20 × 5
–
–
–
2000
8PQ4000-0BA83
1
30 × 5
–
–
–
2000
8PQ4000-0BA85
1
40 × 5
–
–
–
2000
8PQ4000-0BA80
1
15 × 10
–
–
–
2000
8PQ4000-1BA04
1
20 × 10
–
–
–
2000
8PQ4000-0BA84
1
30 × 10
–
–
–
2000
8PQ4000-0BA86
1
40 × 10
–
–
–
2000
8PQ4000-0BA17
1
50 × 10
–
–
–
2000
8PQ4000-0BA18
1
60 × 10
–
–
–
2000
8PQ4000-0BA87
1
80 × 10
–
–
–
2000
8PQ4000-0BA88
1
100 × 10
–
–
–
2000
8PQ4000-1BA00
1
120 × 10
–
–
–
2000
8PQ4000-1BA01
1
01679
Rigid busbar, perforated, with threading
01679
Rigid busbar, perforated
01678
Rigid busbar
01680
PVC insulated flexible busbar
13 × 3 × 0,5
–
160
20
2000
8GF5680
1
13 × 3 × 0,5
–
160
40
2000
8GF5686
1
20 × 5 × 1
–
250
20
2000
8GF5681
1
16 × 4 × 0,8
–
250
40
2000
8GF5687
1
32 × 5 × 1
–
400
20
2000
8GF5682
1
24 × 4 × 1
–
400
40
2000
8GF5688
1
40 × 8 × 1
–
630
20
2000
8GF5683
1
40 × 5 × 1
–
630
40
2000
8GF5690
1
40 × 10 × 1
–
800
30
2000
8PQ4000-1BA03
1
40 × 10 × 1
–
1000
40
2000
8PQ4000-1BA03
1
40 × 10 × 1
–
1250
50
2000
8PQ4000-1BA03
1
50 × 10 × 1
–
1250
20
2000
8PQ4000-1BA02
1
30 × 30
–
–
–
1610
8PQ4000-0BA27
4
40 × 30
–
–
–
1610
8PQ4000-0BA26
4
01677
Rigid busbar, H shaped
Siemens LV 56 · 2008
5/13
5
Busbar System
Fasteners for connections
between copper busbars
■ Description
■ Configuration
To ensure a reliable connection of the copper busbars, it is
important to select quality fasteners, of the right size, suitable
and appropriately treated for the task.
The table below provides an overview of the various copper
busbars - fasteners combination options, so as to facilitate
selection and ordering.
The stated quantity of fasteners applies to a 4-pole
arrangement.
Rules for the calculation of the screw length for different busbar
dimensions:
– Length of screw with M8 threading = busbars profile + 15 mm
– Length of screw with M10, M12 threading = busbars profile +
20 mm
■ Selection and ordering data
Profile
Dimensions
mm × mm
Quantity
Ordering code
Description
Profiled busbar
30 × 30, 40 × 30
Rectangular busbar
2 × 30 × 10
Rectangular busbar
2 × 40 × 10
Rectangular busbar
2 × 20 × 10, 2 × 40 × 10
Rectangular busbar
4 × 40 × 10, 4 × 50 × 10
Rectangular busbar
2 × 20 × 10, 2 × 30 × 10
4
8
12
12
4
8
8
12
12
4
8
8
12
12
12
12
12
8
8
16
16
8
8
8
2
1
1
1
8PQ9500-0BA14
8PQ9500-0BA01
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA14
8PQ9500-1BA36
8PQ9400-0BA02
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA14
8PQ9500-1BA25
8PQ9400-0BA02
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA14
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA14
8PQ9500-0BA16
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA16
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA34
8PQ9500-0BA14
8PQ9500-0BA60
8PQ9500-0BA05
DIN 603 - M10x35 non-cascaded square screw
M10x25 T-head screw
DIN 6796 10 clamping washer
Hexagonal nut ISO 4032 M10
DIN 603 - M10x35 non-cascaded square screw
DIN 603 - M10x55 non-cascaded square screw
Rail clamp
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
DIN 603 - M10x35 non-cascaded square screw
DIN 603 - M10x65 non-cascaded square screw
Rail clamp
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
DIN 603 - M10x35 non-cascaded square screw
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
DIN 603 - M10x35 non-cascaded square screw
DIN 603 - M10x45 non-cascaded square screw
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
DIN 603 - M10x45 non-cascaded square screw
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
DIN7500 - M6x10 self-tapping screw
DIN 603 - M10x35 non-cascaded square screw
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
4
8
8
12
12
4
8
8
12
12
4
8
12
12
12
12
12
16
16
16
8
8
8
16
16
16
2
1
1
1
8PQ9500-0BA16
8PQ9500-0BA01
8PQ9400-0BA02
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA16
8PQ9500-1BA36
8PQ9400-0BA02
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA16
8PQ9500-1BA25
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA16
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA16
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA16
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA16
8PQ9500-0BA60
8PQ9500-0BA05
8PQ9500-0BA34
8PQ9500-0BA16
8PQ9500-0BA60
8PQ9500-0BA05
DIN 603 - M10x45 non-cascaded square screw
M10x25 T-head screw
Rail clamp
DIN 6796 10 clamping washer
Hexagonal nut ISO 4032 M10
DIN 603 - M10x45 non-cascaded square screw
DIN 603 - M10x55 non-cascaded square screw
Rail clamp
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
DIN 603 - M10x45 non-cascaded square screw
DIN 603 - M10x65 non-cascaded square screw
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
DIN 603 - M10x45 non-cascaded square screw
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
DIN 603 - M10x45 non-cascaded square screw
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
DIN 603 - M10x45 non-cascaded square screw
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
DIN 603 - M10x45 non-cascaded square screw
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
DIN7500 - M6x10 self-tapping screw
DIN 603 - M10x45 non-cascaded square screw
DIN 6796 - 10 clamping washer
ISO 4032 - M10 hexagonal nut
Main busbar systems with 2 bars per phase
Connection from
main busbars to:
Cascaded vertical
busbars
5
Non-cascaded
vertical busbars
Connection between cubicle and
main busbars
L1...3, N (PEN)
Connection between main busbar PEN ands
cubicle
PEN (per cubicle)
Main busbar systems with 4 bars per phase
Connection from
main busbars to:
Cascaded vertical
busbars
Non-cascaded
vertical busbars
Connection between cubicle and
main busbars
Connection between main busbar PEN and
cubicle
5/14
L1...3, N (PEN)
Profiled busbar
30 × 30, 40 × 30
Rectangular busbar
2 × 30 × 10
Rectangular busbar
2 × 40 × 10
Rectangular busbar
2 × 20 × 10, 2 × 40 × 10
Rectangular busbar
4 × 40 × 10, 4 × 50 × 10
Rectangular busbar
4 × 20 × 10, 4 × 30 × 10
Rectangular busbar
4 × 40 × 10, 4 × 50 × 10
PEN (per cubicle)
Siemens LV 56 · 2008
6
Assembly Kits for Switching
Devices
6/2
General Data
6/3
Assembly kit for
SENTRON 3WL circuit
breakers
6/9
Assembly kit for
SENTRON 3VL moulded case
circuit breakers
6/20
Assembly kit for
SENTRON 3VT moulded case
circuit breakers
6/23
Assembly kit for
SENTRON 3K disconnectors
6/26
Assembly kit for in-line fuse
switch disconnectors
SENTRON 3NJ4
6/29
Assembly kit for in-line fuse
switch disconnectors
SENTRON 3NJ6
6/32
Assembly kit for modular
installation devices
Siemens LV 56 · 2008
Assembly Kits for Switching Devices
General Data
■ Overview
6
1
2
3
4
1 Assembly kit for SENTRON 3WL
circuit breakers
2 DIN rail for BETA modular devices
01694
3 Assembly kit for SENTRON 3VL
case circuit breakers, horizontal intallation
4 Assembly kit for SENTRON 3VL
case circuit breakers, vertical installation
6/2
Siemens LV 56 · 2008
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3WL
circuit breakers
■ Overview
2
6
3
7
8
5
4
9
1
11
21
25
19
10
18
22
23
12
6
24
20
13
17
15
14
16
1 Fixed part for draw-out version
14 Emergency stop button, locking key
2 Front attachments, flanged, horizontal, vertical
15 Motorised mechanism
3 Switch position indicator contacts
16 Operation counter
4 Grounding contact
17 Breaker Status Sensor (BSS)
5 Protective louvers
18 Electronic overcurrent release (ETU)
6 PROFIBUS COM 15 communication module
19 Reset solenoid
7 CubicleBUS external modules
20 BDA (Breaker Data Adapter) module
8 Auxiliary disconnectors, closing solenoid
21 4-line LCD display
9 Connector system for auxiliary units
22 Earth fault protection module
10 Auxiliary contact modules
23 Rating Plug
11 Front frame
24 Measuring function module
12 Support for locking devices
25 SENTRON WL circuit breaker
13 Clear cover
Siemens LV 56 · 2008
6/3
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3WL
circuit breakers
■ Technical specifications
Switching capacity
Size
I
Type
3WL11
II
Switching capacity class
N
3WL12
S
N
S
H
Rated operating voltage Ue
up to AC 415 V
Icu
kA
55
66
66
80
100
Ics
kA
55
66
66
80
100
Icm
kA
121
145
145
176
220
Icu
kA
55
66
66
80
100
Ics
kA
55
66
66
80
100
Icm
kA
112
145
145
176
220
Icu
kA
42
50
50
75
85
Ics
kA
42
50
50
75
85
Icm
kA
88
105
105
165
187
Rated operating voltage Ue
up to AC 500 V
Rated operating voltage Ue
up to AC 690 V
Rated operating voltage Ue
up to AC 1000 V
6
Icu
kA
–
–
–
–
45
Ics
kA
–
–
–
–
45
Icm
kA
–
–
–
–
95
Rated short-time current Icw of circuit breaker
Size
I
Type
3WL11
Switching capacity class
N
S
II
3WL12
N
S
H
0,5 s
kA
50
66
66
80
100
1s
kA
42
50
55
66
80
2s
kA
29,5
35
39
46
501)/562)
3s
kA
24
29
32
37
401)/502)
Rated short-circuit current Icc of circuit breaker
Size
I
Type
3WL11
II
Switching capacity class
N
S
3WL12
N
S
H
up to AC 500 V
kA
50
66
66
80
100
up to AC 690 V
kA
42
50
50
75
85
1) Size II with In max ≤ 2500 A.
2) Size II with In max ≤ 3200 A.
Size
I
Type
up to
3WL11 12 3WL11 16 3WL12 08 3WL12 10 3WL12 12 3WL12 16 3WL12 20 3WL12 25 3WL12 32
3WL11 10
Minimum
phase size
II
Busbars, Cu,
piece
1×
2×
2×
1×
1×
2×
2×
3×
2×
3×
bare
mm2
60 × 10
40 × 10
50 × 10
50 × 10
60 × 10
40 × 10
50 × 10
50 × 10
100 × 10
100 × 10
Busbars, Cu
piece
1×
2×
2×
1×
1×
2×
2×
3×
2×
3×
insulated, black
mm2
60 × 10
40 × 10
50 × 10
50 × 10
60 × 10
40 × 10
50 × 10
50 × 10
100 × 10
100 × 10
For further information, see the technical documents on SENTRON 3WL
6/4
II
Siemens LV 56 · 2008
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3WL
circuit breakers
■ Description
■ Configuration
The assembly kit for SENTRON 3WL circuit breakers is made up of:
• Mounting plate
• Crossbars
• Cover with cut-out and fast closing screws (designed for the
installation of the Sentron 3WL with cover frame)
• Separation partition
• Fasteners
The assembly kits for Sentron 3WL circuit breakers are suitable
for currents of up to 3200 A.
The horizontal plate is suitable for the installation of circuit
breakers, in fixed and draw out versions of different sizes.
Horizontal separation ensures the required arcing spaces.
The cover has a cut-out to fit the relative frame 3WL 91110AP01-0AA0.
The Sentron 3WL 1240 circuit breaker can be installed only in
800mm deep cubicles.
The assembly kit for Sentron 3WL circuit breakers can be
installed only in 600mm and 800mm deep cubicles.
■ Selection and ordering data
No. of poles
Width
mm
Module height
mm
Mounting plate
SENTRON 3WL
Cover
SENTRON 3WL
02051
02050
Size
Assembly kit for Sentron 3WL, in fixed and draw out versions
BG I, BG II
3
600
550
8PQ6000-3BA31
8PQ2055-6BA05
BG I
4
600
550
8PQ6000-3BA31
8PQ2055-6BA07
BG I
3/4
800
550
8PQ6000-3BA32
8PQ2055-8BA04
BG II
3
800
550
8PQ6000-3BA32
8PQ2055-8BA07
BG II
4
800
550
8PQ6000-3BA32
8PQ2055-8BA05
■ Description
■ Configuration
The support kit consists of a strip in fibreglass reinforced plastic
sized 25x25mm and the relative fasteners to secure it to the
cubicle or to the side upright.
The distance between the circuit breaker terminal bar and the
support and the distance between two supports is ≤ 100mm.
■ Selection and ordering data
No. of poles
Width
mm
Support
Ordering code
UI
02057
Size
Support for Sentron 3WL, in fixed and draw out versions
BG I
3/4
600
8PQ6000-4BA35
4
BG II
3
600
8PQ6000-4BA36
4
BG I
3/4
800
8PQ6000-4BA37
4
BG II
3/4
800
8PQ6000-4BA38
4
Siemens LV 56 · 2008
6/5
6
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3WL
circuit breakers
■ Description
■ Configuration
The support kit is made up of crossbars, corner pieces and the
fasteners to secure the support to the structure or the side
upright.
For the arrangement of supports in standard position in the
SIVACON S4 system, see chapter 11 “Dimensions”.
The connection of distribution busbars is not included in the kit.
The busbars must be mounted by the board installation
technician.
■ Selection and ordering data
No. of poles
Width
mm
Support
Ordering code
UI
NSE0_02058
Size
Support for busbar connection kit for Sentron 3WL, in fixed and draw out versions
BG I
3,4
600
8PQ3000-1BA70
BG II
3
600
8PQ3000-1BA70
1
BG I, BG II
3,4
800
8PQ3000-1BA71
1
02211
6
Support busway connection SIVACON 8PS
6/6
Siemens LV 56 · 2008
1
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3WL
circuit breakers
■ Description
■ Configuration
The connections to SIVACON 8PS busways are optimised for the
connection of Sentron 3WL circuit breakers in the SIVACON S4
system.
It is important to select the correct combination of circuit breaker,
busway connection and busway.
■ Selection and ordering data
Sentron 3WL
GR I
Sentron 3WL
GR II
Sentron 3WL
GR I
Sentron 3WL
GR II
Busway
connection
Ordering code
Conductor
configuration
Suitable for
busways
In [A]
Suitable for
busways
In [A]
Suitable for
busways
In [A]
BVP:660299
100% PEN
LDA3423(5)-...
1600
LDA2423(5)-...
1250
LDA1423(5)-...
1100
BVP:660300
100% N
LDA3623(5)-...
1600
LDA2623(5)-...
1250
LDA1623(5)-...
1100
BVP:660301
100% PEN
LDA4423(5)-...
2000
–
–
BVP:660302
100% N
LDA2623(5)-...
2000
–
–
BVP:660303
100% PEN
LDA3423(5)-...
2600
LDA2423(5)-...
2000
–
BVP:660304
100% N
LDA3623(5)-...
2600
LDA2623(5)-...
2000
–
BVP:660305
50% PEN
LDA6413(5)-...
3000
LDA5413(5)-...
2500
LDA4413(5)-...
2000
BVP:660306
100% PEN
LDA6423(5)-...
3000
LDA5423(5)-...
2500
LDA4423(5)-...
2000
BVP:660307
50% N
50% PE
LDA6613(5)-...
3000
LDA5613(5)-...
2500
LDA4613(5)-...
2000
BVP:660308
100% N
50% PE
LDA6623(5)-...
3000
LDA5623(5)-...
2500
LDA4623(5)-...
2000
BVP:660309
50% PEN
LDA6413(5)-...
3400
–
–
BVP:660310
100% PEN
LDA6423(5)-...
3400
–
–
BVP:660311
50% N
50% PE
LDA6613(5)-...
3400
–
–
BVP:660312
100% N
50% PE
LDA6623(5)-...
3400
–
–
Busway
connection
Ordering code
Conductor
configuration
Suitable for
busways
In [A]
Suitable for
busways
In [A]
Suitable for
busways
In [A]
Suitable for
busways
In [A]
Suitable for
busways
In [A]
BVP:660321
100% PEN
LXC0341-... 1400
LXC0141-... 1000
LXA0141-... 800
–
–
BVP:660322
100% N
LXC0351-... 1400
LXC0151-... 1000
LXA0151-... 800
–
–
BVP:660323
100% PEN
LXA0541-... 1600
LXC0441-... 1600
LXA0441-... 1250
LXC0241-... 1250
LXA0241-... 1000
BVP:660324
100% N
BVP:660325
100% PEN
BVP:660326
100% N
BVP:660327
100% PEN
BVP:660328
100% N
BVP:660329
100% PEN
BVP:660330
100% N
BVP:660331
100% PEN
BVP:660332
100% N
BVP:660333
100% PEN
BVP:660334
100% N
100% PE
100% PE
100% PE
100% PE
100% PE
100% PE
100% PE
100% PE
100% PE
100% PE
6
LXA0551-... 1600
LXC0451-... 1600
LXA0451-... 1250
LXC0251-... 1250
LXA0251-... 1000
LXA0641-... 2000
LXC0541-... 2000
–
–
–
LXA0651-... 2000
LXC0551-... 2000
–
–
–
LXC0641-... 2500
–
–
–
–
LXC0651-... 2500
–
–
–
–
LXA0741-... 2500
–
–
–
–
LXA0751-... 2500
–
–
–
–
LXC0741-... 3200
–
–
–
–
LXC0751-... 3200
–
–
–
–
LXA0841-... 3200
–
–
–
–
LXA0851-... 3200
–
–
–
–
Siemens LV 56 · 2008
6/7
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3WL
circuit breakers
■ Description
■ Configuration
The prefabricated Cu busbar kit for Sentron 3WL circuit breakers
is made up of:
• Crossbars
• Support
• Reinforcement
• Copper busbars
• Protective isolation shield
• Fasteners
The Cu connecting busbar kit for Sentron 3WL circuit breakers
going to the cable connection system occupies the heights of
the module specified above or below the circuit breaker.
With the cable entry variants and connection to the vertical
distribution busbars variants, the system offers connection kits
type tested in terms of CT mounting and number of connection
points, in cascaded form, for the respective circuit breaker rated
currents. Through the combination of variants it is possible to
achieve functions such as incomer, outgoing and coupler.
Construction of connecting busbars for Sentron 3WL circuit
breakers with flanged terminal bars for draw out versions.
To be able to anchor, bend and connect the cables it is
necessary to leave enough space for the assembly operations.
Construction of connecting busbars for Sentron 3WL circuit
breakers with horizontal rear terminal bars for fixed versions.
■ Selection and ordering data
Module height
Size
Current
No. of
poles
Version
Width
mm
above the breaker
mm
below the breaker
mm
Ordering code
UI
300
300
300
300
350
350
350
350
8PQ6000-0BA34
8PQ6000-0BA33
8PQ6000-2BA45
8PQ6000-2BA44
8PQ6000-0BA41
8PQ6000-0BA40
8PQ6000-0BA47
8PQ6000-0BA46
1
1
1
1
1
1
1
1
250
250
250
250
400
400
400
400
8PQ6000-0BA52
8PQ6000-0BA51
8PQ6000-2BA47
8PQ6000-2BA46
8PQ6000-0BA58
8PQ6000-0BA57
8PQ6000-0BA65
8PQ6000-0BA64
1
1
1
1
1
1
1
1
Kit of prefabricated busbars for Sentron 3WL for connection to the vertical bars, cascaded
1600A
1600A
1600A
1600A
2000A
2000A
3200A
3200A
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
Fixed
Draw out
Fixed
Draw out
Fixed
Draw out
Fixed
Draw out
600
600
800
800
800
800
800
800
250
250
250
250
300
300
300
300
Kit of prefabricated busbars for Sentron 3WL for connection to the connecting cables
1600A
1600A
1600A
1600A
2000A
2000A
3200A
3200A
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
Fixed
Draw out
Fixed
Draw out
Fixed
Draw out
Fixed
Draw out
600
600
800
800
800
800
800
800
200
200
200
200
350
350
350
350
02055
BG I
BG I
BG I
BG I
BG II
BG II
BG II
BG II
02054
6
BG I
BG I
BG I
BG I
BG II
BG II
BG II
BG II
Sentron 3WL with horizontal rear terminal bars, for fixed version
6/8
Siemens LV 56 · 2008
Sentron 3WL with flanges, for draw out version
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3VL
moulded case circuit breakers
■ Overview
9
10
8
2
3
11
10
4
5
6
7
1
14
12
21
15
20
18
17
16
13
4
5
19
6
6
7
3
8
9
1 Fixed part for plugin version
12 Direct rotary operating mechanism
2 Side panels for draw out version
13 Door locking rotary operating mechanism
3 Phase separators
14 SENTRON VL circuit breaker
4 Front terminal bars, divergent
15 Internal accessories
5 Front terminal bars, straight
16 Electronic overcurrent release
6 Terminals for Al/Cu cables
17 Thermal/magnetic overcurrent release
7 Terminals for copper cables and busbars
18 DI module - RCD
8 Terminal cover, extended
19 Rear connections - flat and round
9 Terminal cover, standard
20 COM 10 PROFIBUS-DP communication module
10 Front frame
21 Handheld testing device
11 Motorised operating mechanism
with spring accumulator
Siemens LV 56 · 2008
6/9
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3VL
moulded case circuit breakers
■ Technical specifications
VL 160X
3VL1
Type
VL 160
3VL2
VL 250
3VL3
VL 400
3VL4
VL 630
3VL5
VL 800
3VL6
VL 1250
3VL7
VL 1600
3VL8
Connection dimensions and types for main circuits
Box terminals
mm2
2,5-95
2,5-95
25-185
50-300
–
–
–
–
Flexible wire with sleeve connector
mm2
2,5-50
2,5-50
25-120
50-240
–
–
–
–
Busbar
mm
12 × 10
12 × 10
17 × 10
25 × 10
–
–
–
–
Clamp for flexible bar
mm
–
–
–
–
2 pieces
6 × 32
–
–
–
mm2
16-70
16-70
25-185
50-300
–
–
–
–
mm2
10-50
10-50
25-120
50-240
–
–
–
–
mm2
–
–
–
2 pieces
50-120
2 pieces
50-240
3 pieces
50-240
4 pieces
50-240
–
mm2
–
–
–
2 pieces
50-95
2 pieces
50-185
3 pieces
50-185
4 pieces
50-185
–
mm
17 × 7
22 × 7
24 × 7
32 × 10
40 × 10
2 × 40 × 10 2 × 50 × 10 3 × 60 × 10
M5
M5
M8
M8
M6
M8
Single- or multi-wire cable
only copper
Power supply terminals with multiple
cables
Single- or multi-wire cable
copper or Al
Flexible wire with sleeve connector
Multiple feed-in terminal
Power supply terminals for cables
copper or Al
Flexible wire with end terminal
Direct busbar connection
Screw type for screwed connection
6
6/10
Siemens LV 56 · 2008
copper or Al
M8
–
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3VL moulded
case circuit breaker, horizontal installation
■ Description
■ Configuration
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
For installation on the front frame, choice of covers includes
versions suitable for direct, motorised and rotary front operating
mechanisms. The covers are secured to the front frame by means
of fast closing screws (1/4 of a turn).
Hinges to be fitted to the individual covers are available as an
option.
The Link-N kit includes support, cover and fasteners. In the 3and 4-pole moulded case circuit breaker combination this kit
provides the internal separation for a branch unit.
For horizontal installation and front connections, extended
terminal covers have to be ordered.
A combination of front frame and covers with modular doors in a
cubicle is not possible.
■ Selection and ordering data
Cover with cut-out for
type of op. mechanism
Height
mm
Width
mm
Depth1 Max no.
of circuit
mm
breakers
Link-N support
Equipment
mounting plate
Cover
02059
02060
No. Connection
of
poles
02064
Circuit
breaker
Sentron 3VL moulded case circuit breakers, fixed, horizontal installation
VL 160X
VL 160X
VL 160/250
VL 160/250
VL 400
VL 400
VL 630
VL 630
VL 800
VL 800
3
4
3
4
3
4
3
4
3
4
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
rear
rear
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
150
200
150
200
200
250
300
350
300
350
600
600
600
600
600
600
600
600
600
600
■ Description
400
400
400
400
400
400
400
400
400
400
1
1
1
1
1
1
1
1
1
1
8PQ6000-3BA52
8PQ6000-3BA52
8PQ6000-3BA53
8PQ6000-3BA54
8PQ6000-2BA74
8PQ6000-2BA80
8PQ6000-3BA13
8PQ6000-3BA18
8PQ6000-2BA84
8PQ6000-2BA87
8PQ6000-3BA01
8PQ6000-3BA10
8PQ6000-3BA08
8PQ6000-4BA16
8PQ2015-6BA03
8PQ2020-6BA04
8PQ2015-6BA03
8PQ2020-6BA04
8PQ2020-6BA06
8PQ2025-6BA02
8PQ2030-6BA03
8PQ2035-6BA04
8PQ2030-6BA02
8PQ2035-6BA05
■ Configuration
The prefabricated Cu busbar kit for Sentron 3VL moulded case
circuit breakers for horizontal installation is made up of:
• Crossbars
• Support
• Plastic reinforcement
• Copper busbars
• Protective isolation shield
• Fastening screws
With the cable entry variants and connection to the vertical
distribution busbars variants, the system offers connection kits
type-tested in terms of CT mounting and number of connection
points to the busbars, in cascaded form, for the respective
circuit breaker rated currents.
The height of the connecting busbars kit matches the type of
circuit breaker.
The connecting busbar kit is suitable for branch units without
differential module.
In addition to the copper busbars and the cover, the “connecting
busbar” kit for Sentron VL circuit breakers for connection to the
cables contains lateral partitions with connecting terminals.
When fitting connecting busbar kit for Sentron VL circuit breakers
for connection to the cascaded vertical busbars in a 600 mm
cubicle, the vertical distribution busbar system must be housed in
the same cubicle (800 mm cubicle with riser compartment 600 +
200 mm).
■ Selection and ordering data
Circuit
breaker
No. of
poles
Version
Ad hoc covers for type
of op. mech.
Max. no. of
switches
Height of module
mm
Width
mm
Ordering code
UI
1
01652
Kit of connecting bars for Sentron 3VL for connection to cascaded vertical distribution bars
VL 250
3
fixed
direct
1
150
600
8PQ6000-1BA63
VL 250
4
fixed
direct
1
200
600
8PQ6000-1BA64
1
VL 400
3
fixed
direct
1
200
600
8PQ6000-1BA65
1
VL 400
4
fixed
direct
1
250
600
8PQ6000-1BA66
1
VL 630
3
fixed
direct
1
300
600
8PQ6000-1BA67
1
VL 630
4
fixed
direct
1
350
600
8PQ6000-1BA68
1
1
01653
Kit of connecting bars for Sentron 3VL for connection to the cables
1
VL 250
3
fixed
direct
1
150
600
8PQ6000-1BA70
VL 250
4
fixed
direct
1
200
600
8PQ6000-1BA71
1
VL 400
3
fixed
direct
1
200
600
8PQ6000-1BA72
1
VL 400
4
fixed
direct
1
250
600
8PQ6000-1BA73
1
VL 630
3
fixed
direct
1
300
600
8PQ6000-1BA74
1
VL 630
4
fixed
direct
1
350
600
8PQ6000-1BA75
1
minimum depth
Siemens LV 56 · 2008
6/11
6
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3VL moulded
case circuit breaker, for horizontal installation
■ Description
■ Configuration
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
For horizontal installation and front connections, extended
terminal covers have to be ordered.
For installation on the front frame, choice of covers includes
versions suitable for direct, motorised and rotary front operating
mechanisms. The covers are secured to the front frame by means
of fast closing screws (1/4 of a turn).
To improve the stability of the kits for VL 400 and 630 in plug-in
version it is necessary to fit a reinforcement kit for each branch
unit.
Hinges to be fitted to the individual covers are available as an
option.
A combination of front frame and covers with modular doors in a
cubicle is not possible.
The Link-N kit includes support, cover and fasteners. In the 3and 4-pole moulded case circuit breaker combination this kit
provides for the internal separation for a branch unit.
■ Selection and ordering data
Height of Width Depth
module
mm mm
mm
Max. no. N-Link support
of circuit
breakers
Equipment
mounting plate
Cover
02060
Ad hoc cover for type of
op. mech.
02059
No. Connecof
tion
poles
02064
Circuit
breaker
Sentron 3VL moulded case circuit breakers, plug-in, for horizontal installation
VL 160X
VL 160X
VL 160/250
VL 160/250
VL 400
VL 400
VL 400
VL 400
VL 630
VL 630
VL 630
VL 630
6
1
3
4
3
4
3
3
4
4
3
3
4
4
front, rear
front, rear
front, rear
front, rear
front
rear
front
rear
front
rear
front
rear
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Minimum depth
6/12
Siemens LV 56 · 2008
150
200
150
200
200
200
250
250
300
300
350
350
600
600
600
600
600
600
600
600
600
600
600
600
400
400
400
400
400
600/800
400
600/800
400
600/800
400
600/800
1
1
1
1
1
1
8PQ6000-3BA52
8PQ6000-3BA52
8PQ6000-3BA53
8PQ6000-3BA53
1
1
1
1
8PQ6000-3BA54
8PQ6000-3BA54
8PQ6000-3BA24
8PQ6000-3BA27
8PQ6000-3BA24
8PQ6000-3BA27
8PQ6000-2BA84
8PQ6000-2BA84
8PQ6000-2BA87
8PQ6000-2BA87
8PQ6000-3BA01
8PQ6000-3BA01
8PQ6000-3BA10
8PQ6000-3BA10
8PQ2015-6BA03
8PQ2020-6BA04
8PQ2015-6BA03
8PQ2020-6BA04
8PQ2020-6BA06
8PQ2020-6BA06
8PQ2025-6BA02
8PQ2025-6BA02
8PQ2030-6BA03
8PQ2030-6BA03
8PQ2035-6BA04
8PQ2035-6BA04
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3VL moulded
case circuit breaker, for horizontal installation
■ Description
■ Configuration
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
For installation on the front frame, choice of covers includes
versions suitable for direct, motorised and rotary front operating
mechanisms. The covers are secured to the front frame by means
of fast closing screws (1/4 of a turn).
Hinges to be fitted to the individual covers are available as an
option.
The Link-N kit includes support, cover and fasteners. In the 3and 4-pole moulded case circuit breaker combination this kit
provides for the internal separation for a branch unit.
For horizontal installation and front connections, extended
terminal covers have to be ordered.
A combination of front frame and covers with modular doors in a
cubicle is not possible.
■ Selection and ordering data
Ad hoc cover for type of op.
mech.
Height of Width Depth1 Max. no.
module
mm mm
of circuit
mm
breakers
Equipment
mounting plate
Cover
02140
No. of Connecpoles tion
02059
Circuit
breaker
Sentron 3VL moulded case circuit breaker, draw out, for horizontal installation
front, rear
front, rear
front, rear
front, rear
3/4
3/4
3
4
Circuit
breaker
No. of Connecpoles tion
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
250
300
300
350
Ad hoc cover for type of op.
mech.
Height of Width Depth1 Max. no.
module
mm mm
of circuit
mm
breakers
600
600
600
600
400
400
400
400
1
1
1
1
8PQ6000-3BA27
8PQ6000-2BA87
8PQ6000-3BA01
8PQ6000-3BA10
8PQ2020-6BA21
8PQ2025-6BA11
8PQ2030-6BA17
8PQ2035-6BA17
Reinforcement
02139
VL 160/250
VL 400
VL 630
VL 630
Reinforcement per Sentron 3VL circuit breaker kit, draw out, horizontal installation
Circuit
breaker
No. of Connecpoles tion
Ad hoc cover for type of
op. mech.
400
400
400
1
1
1
8PQ6000-4BA17
8PQ6000-4BA20
8PQ6000-4BA18
Height of Width Depth1 Max. no. N-Link
module
mm mm
of circuit
mm
breakers
Equipment
mounting plate
Cover
02063
600
600
600
02062
3/4
3
4
02064
VL 400
VL 630
VL 630
Sentron 3VL compact moulded case circuit breaker with RCD, with fixed mounting technology,
mounted horizontally
No. of Connecpoles tion
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Ad hoc cover for type of op.
mech.
150
200
150
200
600
600
600
600
400
400
400
400
1
1
1
1
8PQ6000-3BA52
8PQ6000-3BA52
Height of Width Depth1 Max. no. N-Link
module
mm mm
of circuit
mm
breakers
8PQ6000-2BA73
8PQ6000-2BA78
8PQ6000-3BA14
8PQ6000-3BA20
8PQ2015-6BA05
8PQ2020-6BA08
8PQ2015-6BA04
8PQ2020-6BA05
Equipment
mounting plate
Cover
02063
front, rear
front, rear
front
rear
02064
Circuit
breaker
3
4
3
4
02062
VL 160X
VL 160X
VL 160/250
VL 160/250
Sentron 3VL compact moulded case circuit breaker, with plug-in technology, mounted
horizontally
VL 160X
VL 160X
VL 160/250
VL 160/250
1
Minimum depth
3
4
3
4
front, rear
front, rear
fron
rear
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
150
200
150
200
600
600
600
600
400
400
400
400
1
1
1
1
8PQ6000-3BA52
8PQ6000-3BA52
8PQ6000-2BA75
8PQ6000-2BA81
8PQ6000-2BA75
8PQ6000-2BA81
8PQ2015-6BA06
8PQ2020-6BA07
8PQ2015-6BA04
8PQ2020-6BA05
Siemens LV 56 · 2008
6/13
6
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3VL moulded
case circuit breaker, for horizontal installation
■ Description
■ Configuration
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
For horizontal installation and front connections, extended
terminal covers have to be ordered.
The modular doors kit with degree of protection IP4X with holes for
the 8UC door locking mechanism contains a door, hinges,
individual cover and fasteners.
A combination of front frame and covers with modular doors in a
cubicle is not possible.
The Link-N kit includes support, cover and fasteners. In the 3and 4-pole moulded case circuit breaker combination this kit
provides for the internal separation for a branch unit.
For a degree of protection IP55 an upgrade to IP55 is available
(see chapter 7, modular doors).
a Due to the length of the operating mechanism, an height 50mm
module above the assembly kit should be provided for at the
design stage.
■ Selection and ordering data
Height of Width Depth1
module
mm mm
mm
Max. no. N-Link support
of circuit
breakers
Equipment
mounting plate
Modular door
02061
Ad hoc cover for type of
op. mech.
02059
No. of Connecpoles tion
02064
Circuit
breaker
Sentron 3VL moulded case circuit breaker, fixed, for horizontal installation
VL 160X
VL 160X
VL 160/250
VL 160/250
VL 400
VL 400
VL 630
VL 630
VL 800
VL 800
6
3
4
3
4
a 3
4
3
4
3
4
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
rear
rear
8UC-door locking mech., Gr. 2
8UC-door locking mech., Gr. 2
8UC-door locking mech., Gr. 2
8UC-door locking mech., Gr. 2
8UC-door locking mech., Gr. 2
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
150
200
150
200
200
250
300
350
300
350
Ad hoc cover for type of
op. mech.
Height of Width Depth1
module
mm mm
mm
600
600
600
600
600
600
600
600
600
600
400
400
400
400
400
400
400
400
400
400
1
1
1
1
1
1
1
1
1
1
8PQ6000-3BA52
8PQ6000-3BA52
8PQ6000-3BA53
8PQ6000-3BA54
8PQ6000-2BA74
8PQ6000-2BA80
8PQ6000-3BA13
8PQ6000-3BA18
8PQ6000-2BA84
8PQ6000-2BA87
8PQ6000-3BA01
8PQ6000-3BA10
8PQ6000-3BA08
8PQ6000-4BA16
8PQ2015-6BA14
8PQ2020-6BA16
8PQ2015-6BA14
8PQ2020-6BA16
8PQ2020-6BA20
8PQ2025-6BA10
8PQ2030-6BA15
8PQ2035-6BA15
8PQ2030-6BA16
8PQ2035-6BA16
Equipment
mounting plate
Modular door
Max. no. N-Link support
of circuit
breakers
02061
No. of Connecpoles tion
02064
Circuit
breaker
02059
■ Selection and ordering data
Sentron 3VL moulded case circuit breaker, plug-in, for horizontal installation
VL 160X
VL 160X
VL 160/250
VL 160/250
VL 400
VL 400
VL 630
VL 630
1
3
4
3
4
a 3
4
3
4
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
8UC-door locking mech., Gr. 2
8UC-door locking mech., Gr. 2
8UC-door locking mech., Gr. 2
8UC-door locking mech., Gr. 2
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
Minimum depth
6/14
Siemens LV 56 · 2008
150
200
150
200
200
250
300
350
600
600
600
600
600
600
600
600
400
400
400
400
400
400
400
400
1
1
1
1
1
1
1
1
8PQ6000-3BA52
8PQ6000-3BA52
8PQ6000-3BA53
8PQ6000-3BA54
8PQ6000-3BA24
8PQ6000-3BA27
8PQ6000-3BA24
8PQ6000-3BA27
8PQ6000-2BA84
8PQ6000-2BA87
8PQ6000-3BA01
8PQ6000-3BA10
8PQ2015-6BA14
8PQ2020-6BA16
8PQ2015-6BA14
8PQ2020-6BA16
8PQ2020-6BA20
8PQ2025-6BA10
8PQ2030-6BA15
8PQ2035-6BA15
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3VL moulded
case circuit breaker, for horizontal installation
■ Description
■ Configuration
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
For horizontal installation and front connections, extended
terminal covers have to be ordered.
The modular doors kit with degree of protection IP4X with holes for
the 8UC door locking mechanism contains a door, hinges,
individual cover and fasteners.
A combination of front frame and covers with modular doors in a
cubicle is not possible.
The Link-N kit includes support, cover and fasteners. In the 3and 4-pole moulded case circuit breaker combination this kit
provides for the internal separation for a branch unit.
For a degree of protection IP55 an upgrade to IP55 is available
(see chapter 7, modular doors).
■ Selection and ordering data
Height of Width Depth1
module
mm mm
mm
Max. no. N-Link support
of circuit
breakers
Equipment
mounting plate
Modular door
02061
Ad hoc cover for type of
op. mech.
02062
No. of Connecpoles tion
02064
Circuit
breaker
Sentron 3VL moulded case circuit breaker with differential module, fixed, for horizontal
installation
VL 160/250
VL 160/250
3
4
front, rear
front, rear
8UC-door locking mech., Gr. 2
8UC-door locking mech., Gr. 2
150
200
Ad hoc cover for type of
op. mech.
Height of Width Depth1
module
mm mm
mm
600
600
400
400
1
1
8PQ6000-3BA52
8PQ6000-3BA14
8PQ6000-3BA20
8PQ2015-6BA16
8PQ2020-6BA17
Equipment
mounting plate
Modular door
Max. no. N-Link support
of circuit
breakers
02061
No. of Connecpoles tion
02064
Circuit
breaker
02062
■ Selection and ordering data
Sentron 3VL moulded case circuit breaker with differential module, plug-in,
for horizontal installation
VL 160/250
VL 160/250
1
Minimum depth
3
4
front, rear
front, rear
8UC-door locking mech., Gr. 2
8UC-door locking mech., Gr. 2
150
200
600
600
400
400
1
1
8PQ6000-3BA52
8PQ6000-2BA75
8PQ6000-2BA81
8PQ2015-6BA16
8PQ2020-6BA17
Siemens LV 56 · 2008
6/15
6
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3VL moulded
case circuit breaker, for vertical installation
■ Description
■ Configuration
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
Shielding is provided for the motorised operating mechanism with
spring accumulator.
For installation on the front frame, choice of covers includes
versions suitable for direct, motorised and rotary front operating
mechanism. The covers are secured to the front frame by means
of fast closing screws (1/4 of a turn).
For circuit breaker, base or rack and motorised operating
mechanism combinations, take into due account the indications
given in the dimensional drawings 11/15.
Hinges to be fitted to the individual covers are available as an
option.
b For front terminal bars, two additional covers, height 100mm
each, are required. Moreover, extended terminal covers have
to be ordered for the respective circuit breaker.
The Link-N kit includes support, cover and fasteners. In the 3and 4-pole moulded case circuit breaker combination this kit
provides for the internal separation for a branch unit.
■ Selection and ordering data
Height of Width Depth1
module
mm mm
mm
Max. no. N-Link support
of circuit
breakers
Equipment
mounting plate
Cover
02066
Ad hoc cover for type of
op. mech.
02065
No. of Connecpoles tion
02070
Circuit
breaker
Sentron 3VL moulded case circuit breaker, fixed, for vertical installation
VL 160X
VL 160X
VL 160/250
VL 160/250
VL 400
VL 400
VL 630
VL 630
VL 160X
VL 160X
VL 160/250
VL 160/250
VL 400
VL 400
VL 630
VL 630
6
b
b
b
b
b
b
b
b
3
4
3
4
3
4
3/4
3
3
4
3
4
3
4
3
4
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
350
350
350
350
400
400
400
400
350
350
350
350
400
400
400
400
Ad hoc cover for type of
op. mech.
Height of Width Depth1
module
mm mm
mm
600
600
600
600
600
600
600
600
800
800
800
800
800
800
800
800
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
1-4
1-3
1-4
1-3
1-3
1-2
1
1-2
1-5
1-4
1-5
1-4
1-4
1-3
1-3
1-2
8PQ6000-3BA54
8PQ6000-2BA76
8PQ6000-2BA82
8PQ6000-3BA16
8PQ6000-3BA22
8PQ6000-2BA85
8PQ6000-2BA88
8PQ6000-3BA05
8PQ6000-3BA02
8PQ6000-2BA77
8PQ6000-2BA83
8PQ6000-3BA17
8PQ6000-3BA23
8PQ6000-2BA86
8PQ6000-3BA00
8PQ6000-3BA03
8PQ6000-3BA06
8PQ2035-6BA02
8PQ2035-6BA03
8PQ2035-6BA02
8PQ2035-6BA03
8PQ2040-6BA07
8PQ2040-6BA05
8PQ2040-6BA08
8PQ2040-6BA06
8PQ2035-8BA02
8PQ2035-8BA03
8PQ2035-8BA02
8PQ2035-8BA03
8PQ2040-8BA08
8PQ2040-8BA07
8PQ2040-8BA06
8PQ2040-8BA05
Equipment
mounting plate
Cover
Max. no. N-Link support
of circuit
breakers
02066
No. of Connecpoles tion
02070
Circuit
breaker
02141
■ Selection and ordering data
Sentron 3VL moulded case circuit breaker, fixed, for vertical installation
VL 800
VL 1250
VL 1600
1
b 3/4
b 3/4
b 3/4
front, rear
front, rear
front, rear
Direct, mot. rotary front mech. 600
Direct, mot. rotary front mech. 600
Direct, mot. rotary front mech. 700
Minimum depth
6/16
Siemens LV 56 · 2008
600
600
600
400
400
400
1
1
1
8PQ6000-3BA55
8PQ6000-3BA56
8PQ6000-3BA56
8PQ6000-3BA07
8PQ6000-3BA11
8PQ6000-3BA12
8PQ2060-6BA02
8PQ2060-6BA03
8PQ2070-6BA01
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3VL moulded
case circuit breaker, for vertical installation
■ Description
■ Configuration
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
For installation on the front frame, choice of covers includes
versions suitable for direct, motorised and rotary front operating
mechanism. The covers are secured to the front frame by means
of fast closing screws (1/4 of a turn).
a For front terminal bars, two additional covers, H50mm each,
are required. Moreover, extended terminal covers have to be
ordered for the respective circuit breaker.
b For front terminal bars, two additional covers, H100mm each,
are required. Moreover, extended terminal covers have to be
ordered for the respective circuit breaker.
Hinges to be fitted to the individual covers are available as an
option.
Shielding is provided for the motorised operating mechanism with
spring accumulator.
The Link-N kit includes support, cover and fasteners. In the 3and 4-pole moulded case circuit breaker combination this kit
provides for the internal separation for a branch unit.
For circuit breaker, base or rack and motorised operating
mechanism combinations, take into due account the indications
given in the dimensional drawings 11/15.
■ Selection and ordering data
Height of Width Depth1
module
mm mm
mm
Max. no. N-Link support
of circuit
breakers
Equipment
mounting plate
Cover
02066
Ad hoc cover for type of
op. mech.
02065
No. of Connecpoles tion
02070
Circuit
breaker
Sentron 3VL moulded case circuit breaker, plug-in, for vertical installation
VL 160X
VL 160X
VL 160/250
VL 160/250
VL 400
VL 400
VL 630
VL 630
VL 160X
VL 160X
VL 160/250
VL 160/250
VL 400
VL 400
VL 630
VL 630
1
a
a
a
a
b
b
b
b
a
a
a
a
b
b
b
b
Minimum depth
3
4
3
4
3
4
3/4
3
3
4
3
4
3
4
3
4
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
Direct, mot. rotary front mech.
350
350
350
350
400
400
400
400
350
350
350
350
400
400
400
400
600
600
600
600
600
600
600
600
800
800
800
800
800
800
800
800
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
400
1-4
1-3
1-4
1-3
1-3
1-2
1
1-2
1-5
1-4
1-5
1-4
1-4
1-3
1-3
1-2
8PQ6000-3BA54
8PQ6000-3BA25
8PQ6000-3BA28
8PQ6000-3BA25
8PQ6000-3BA28
8PQ6000-2BA85
8PQ6000-2BA88
8PQ6000-3BA05
8PQ6000-3BA02
8PQ6000-3BA26
8PQ6000-3BA30
8PQ6000-3BA26
8PQ6000-3BA30
8PQ6000-2BA86
8PQ6000-3BA00
8PQ6000-3BA03
8PQ6000-3BA06
8PQ2035-6BA02
8PQ2035-6BA03
8PQ2035-6BA02
8PQ2035-6BA03
8PQ2040-6BA07
8PQ2040-6BA05
8PQ2040-6BA08
8PQ2040-6BA06
8PQ2035-8BA02
8PQ2035-8BA03
8PQ2035-8BA02
8PQ2035-8BA03
8PQ2040-8BA08
8PQ2040-8BA07
8PQ2040-8BA06
8PQ2040-8BA05
Siemens LV 56 · 2008
6/17
6
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3VL moulded
case circuit breaker, for vertical installation
■ Description
■ Configuration
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
For installation on the front frame, choice of covers includes
versions suitable for direct, motorised and rotary front operating
mechanism. The covers are secured to the front frame by means
of fast closing screws (1/4 of a turn).
Hinges to be fitted to the individual covers are available as an
option.
For circuit breaker, base or rack and motorised operating
mechanism combinations, take into due account the indications
given in the dimensional drawings 11/15.
a For front terminal bars, two additional covers, height 50mm
each, are required. Moreover, extended terminal covers have
to be ordered for the respective circuit breaker.
b For front terminal bars, two additional covers, height 100mm
each, are required. Moreover, extended terminal covers have
to be ordered for the respective circuit breaker.
■ Selection and ordering data
Ad hoc cover for type of
op. mech.
Height of Width Depth1
module
mm mm
mm
Max. no.
of circuit
breakers
Equipment
mounting plate
Cover
1
1
1-3
1-2
1-2
1
1
8PQ6000-2BA88
8PQ6000-3BA05
8PQ6000-3BA26
8PQ6000-3BA30
8PQ6000-2BA86
8PQ6000-3BA00
8PQ6000-3BA06
8PQ2040-6BA17
8PQ2060-6BA12
8PQ2035-8BA08
8PQ2040-8BA15
8PQ2040-8BA16
8PQ2040-8BA17
8PQ2040-8BA20
Max. no.
of circuit
breakers
Equipment
mounting plate
Cover
1
1
1
1
8PQ6000-3BA87
8PQ6000-3BA88
8PQ6000-4BA00
8PQ6000-4BA01
02067
No. of Connection
poles
02065
Circuit
breaker
Sentron 3VL moulded case circuit breaker, draw out, for vertical installation
VL 400
VL 630
VL 160/250
VL 160/250
VL 400
VL 400
VL 630
6
b
b
a
a
b
b
b
3/4
3/4
3
4
3
4
3/4
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
Direct, rotary front
Direct, rotary front
Direct, rotary front
Direct, rotary front
Direct, rotary front
Direct, rotary front
Direct, rotary front
400
400
350
350
400
400
400
600
600
800
800
800
800
800
400
400
400
400
400
400
400
No. of Connection
poles
Ad hoc cover for type
of op. mech.
Height of Breite Depth1
module
mm mm
mm
02068
Circuit breaker
02069
■ Selection and ordering data
Sentron 3VL moulded case circuit breaker, draw out, vertical installation
VL 800
VL 800
VL 1250/1600
VL 1250/1600
1
b
b
b
b
3
4
3
4
front, rear
front, rear
front, rear
front, rear
Minimum depth
6/18
Siemens LV 56 · 2008
Direct
Direct
Direct
Direct
600
600
650
650
600
600
600
600
600/800
600/800
600/800
600/800
8PQ2060-6BA13
8PQ2060-6BA14
8PQ2065-6BA05
8PQ2065-6BA06
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3VL moulded
case circuit breaker, for vertical installation
■ Description
■ Configuration
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
Extended terminal covers have to be ordered for front terminal
bars.
The modular doors kit with degree of protection IP4X with holes for
the 8UC door locking mechanism contains a door, hinges,
individual cover and fasteners.
The Link-N kit includes support, cover and fasteners. In the 3and 4-pole moulded case circuit breaker combination this kit
provides for the internal separation for a branch unit.
■ Selection and ordering data
Height of Width
module
mm
mm
Depth1
mm
Max. no. N-Link support
of circuit
breakers
Equipment
mounting plate
Cover
02061
Ad hoc cover for type of
op. mech.
02065
No. of Connecpoles tion
02070
Circuit
breaker
Sentron 3VL moulded case circuit breakers, plug-in, for horizontal installation
VL 630
VL 630
VL 800
VL 800
VL 1250
VL 1250
VL 1600
VL 1600
1
Minimum depth
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
rear
front
rear
front
rear
front
rear
front
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
8UC-door locking mech., Gr. 3
400
600
600
800
600
800
700
900
600
600
600
600
600
600
600
600
400
400
400
400
400
400
400
400
1
1
1
1
1
1
1
1
8PQ6000-3BA54
8PQ6000-3BA54
8PQ6000-3BA55
8PQ6000-3BA55
8PQ6000-3BA56
8PQ6000-3BA56
8PQ6000-3BA56
8PQ6000-3BA56
8PQ6000-3BA05
8PQ6000-3BA05
8PQ6000-3BA07
8PQ6000-3BA07
8PQ6000-3BA11
8PQ6000-3BA11
8PQ6000-3BA12
8PQ6000-3BA12
8PQ2040-6BA16
8PQ2060-6BA17
8PQ2060-6BA10
8PQ2080-6BA05
8PQ2060-6BA11
8PQ2080-6BA06
8PQ2070-6BA02
8PQ2090-6BA01
Siemens LV 56 · 2008
6/19
6
Assembly Kits for Switching Devices
Assembly kit for 3VT moulded
case circuit breakers
■ Overview
1
2
2
6
2
3
02157
1 Assembly kit for 3VT1, fixed, vertical
2 Assembly kit for 3VT2, fixed horizontal
with mechanical lock
3 Assembly kit for 3VT3, draw out, vertical
6/20
Siemens LV 56 · 2008
Assembly Kits for Switching Devices
Assembly kit for 3VT moulded
case circuit breakers, for horizontal installation
■ Description
■ Configuration
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
For the connection always use insulated busbars or cables.
For installation on the front frame, choice of covers includes
versions suitable for direct, motorised and rotary front operating
mechanism. The covers are secured to the front frame by means
of fast closing screws (1/4 of a turn).
Hinges to be fitted to the individual covers are available as an
option.
■ Selection and ordering data
Ad hoc cover for type of
op. mech.
Height of Width Depth1
module
mm mm
mm
Max. no.
of circuit
breakers
Equipment
mounting plate
Cover
02143
No. of Connecpoles tion
02142
Circuit
breaker
3VT moulded case circuit breakers, fixed and plug-in, for horizontal installation
3VT1 (160A)
3VT2 (250A)
3VT2 (250A)
3VT3 (630A)
3VT3 (630A)
3/4
3
4
3
4
front, rear
front, rear
front, rear
front, rear
front, rear
Direct
Direct, motorised
Direct, motorised
Direct, motorised
Direct, motorised
150
150
200
200
250
600
600
600
600
600
400
400
400
400
400
1
1
1
1
1
8PQ6000-4BA21
8PQ6000-4BA23
8PQ6000-4BA24
8PQ6000-4BA27
8PQ6000-4BA26
8PQ2015-6BA17
8PQ2015-6BA18
8PQ2020-6BA22
8PQ2020-6BA23
8PQ2025-6BA14
6
■ Selection and ordering data
Ad hoc cover for type of
op. mech.
Height of Width
module
mm mm
mm
Max. no.
of circuit
breakers
Equipment
mounting plate
1
1
8PQ6000-4BA22
8PQ6000-4BA25
Cover
02145
No. of Connecpoles tion
02144
Circuit
breaker
Depth1
3VT moulded case circuit breakers, draw out, for horizontal installation
3VT2 (250A)
3VT3 (630A)
3/4
3/4
front, rear
front, rear
Direct, motorised
Direct, motorised
250
300
600
600
■ Description
400
400
8PQ2025-6BA13
8PQ2030-6BA20
■ Configuration
The mechnical interlock assembly kit contains a device holder
with holes to fit the locking elements, the supporting rails and the
fasteners.
For the mechanical coupling of 2 circuit breakers installed in the
horizontal position use the mechanical interlocking assembly and
the relative accessories.
■ Selection and ordering data
Ad hoc cover for type of
op. mech.
Height of Width Depth1
module
mm mm
mm
Equipment
mounting plate
Cover
02147
No. of Connecpoles tion
02146
Circuit
breaker
Mechanical lock for Sentron 3VT moulded case circuit breaker, for horizontal installation
3VT2, 3VT3
1
Minimum depth
–
–
–
100
600
400
8PQ6000-4BA34
8PQ2010-6BA01
Siemens LV 56 · 2008
6/21
Assembly Kits for Switching Devices
Assembly kit for 3VT moulded case circuit
breakers, for vertical installation
■ Description
■ Configuration
The equipment support assembly kit contains a deep mounting
plate for front and rear terminal bars and fastening crossbars.
For installation on the front frame, choice of covers includes
versions suitable for direct, motorised and rotary front operating
mechanism. The covers are secured to the front frame by means
of fast closing screws (1/4 of a turn).
Hinges to be fitted to the individual covers are available as an
option.
For the connection always use insulated busbars or cables.
a Front terminal bars and a breaking capacity ≤ 35 kA require
two additional covers, 150mm each. Moreover, the phase
separators and the terminal covers have to ordered.
b Front terminal bars and a breaking capacity ≤ 65 kA require
two additional covers, 200mm each. Moreover, the phase
separators and the terminal covers have to ordered.
■ Selection and ordering data
No. of Connection
poles
Ad hoc cover for
type of op. mech.
Height of Width Depth1
module
mm mm
mm
Max. no.
of circuit
breakers
DIN rail
Cover
1-5
1-2
1-3
1-2
8PQ6000-3BA36
8PQ6000-3BA36
8PQ6000-3BA36
8PQ6000-3BA36
8PQ2045-6BA07
8PQ2045-6BA07
8PQ2045-6BA07
8PQ2045-6BA07
Max. no.
of circuit
breakers
Equipment
mounting plate
Cover
1-3
1-2
1-2
1-2
8PQ6000-4BA28
8PQ6000-4BA30
8PQ6000-4BA31
8PQ6000-4BA32
8PQ2035-6BA18
8PQ2035-6BA20
8PQ2040-6BA18
8PQ2040-6BA20
Max. no.
of circuit
breakers
Equipment
mounting plate
Cover
1-2
1-2
1-2
1
8PQ6000-4BA28
8PQ6000-4BA30
8PQ6000-4BA31
8PQ6000-4BA33
02149
02148
Circuit breaker
Sentron 3VT moulded case circuit breakers, fixed, for vertical installation
3VT1 (160A)
3VT1 (160A)
3VT1 (160A)
3VT1 (160A)
front
front
front
front
Direct
Motorised
Direct
Motorised
450
450
450
450
Ad hoc cover for
type of op. mech.
Height of Width Depth1
module
mm mm
mm
600
600
600
600
400
400
400
400
No. of Connection
poles
02150
Circuit breaker
02151
■ Selection and ordering data
3VT moulded case circuit breakers, fixed and plug-in, for vertical installation
3VT2 (250A)
3VT2 (250A)
3VT3 (630A)
3VT3 (630A)
a,b
a,b
a,b
a,b
3
4
3
4
front, rear
front, rear
front, rear
front, rear
Direct, motorised
Direct, motorised
Direct, motorised
Direct, motorised
350
350
400
400
Ad hoc cover for
type of op. mech.
Height of Width Depth1
module
mm mm
mm
600
600
600
600
400
400
400
400
Circuit breaker
No. of Connection
poles
02153
■ Selection and ordering data
02152
6
3
3
4
4
3VT moulded case circuit breakers, draw out, for vertical installation
3VT2 (250A)
3VT2 (250A)
3VT3 (630A)
3VT3 (630A)
1
a,b
a,b
a,b
a,b
3
4
3
4
front, rear
front, rear
front, rear
front, rear
Minimum depth
6/22
Siemens LV 56 · 2008
Direct, motorised
Direct, motorised
Direct, motorised
Direct, motorised
350
350
400
400
600
600
600
600
400
400
400
400
8PQ2035-6BA18
8PQ2035-6BA20
8PQ2040-6BA18
8PQ2040-6BA21
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3K disconnectors
■ Overview
3
1
6
5
4
2
6
1 BS 88 fuse from IEC NH to British standard
2 IP20 fuse cover
3 IP20 single-pole cover, from 63 to 630 A
4 Standard products from the 3SB1 range
are used as auxiliary contacts
Choice of
5 8UC9 handle fox fixed installation in standard version
(black) and emergency version (red)
6 8UC6 door locking handle witx ± 5 mm adaption
tolerance in horizontal/vertical direction
Standard version (black) and emergency version
(red/yellow)
All disconnector components up to the operating
mechanism are provided with unique identificazion
features
Siemens LV 56 · 2008
6/23
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3K disconnectors
■ Technical specifications
Standard
IEC 60947-1, IEC 60947-3, VDE 0660 Teil 107
3KL50
3KL52
3KL53
3KL551)
3KL571)
3KL611)
Rated continuous current Iu
for fuses according to DIN 43620
A
Size
63
00 u. 000
125
00 u. 000
160
00 u. 000
250
1 and 2
400
1 and 2
630
3 and 2
Cable lug, max (multiwire) conductor size
mm2
35
70
120
150
2 × 150
or
1 × 240
2 × 240
Tightening torque
Connecting screw
Nm
6 ... 7,5
M6
7 ... 10
M6
18 ... 22
M8
35 ... 45
M10
35 ... 45
M10
56
M12
Type
1) Technical specifications for CSA approval upon request.
Type
3KA71 1
Rated continuous current Iu
A
32
45
63
80
100
125
Cable lug, max (multiwire) conductor size
mm2
50
50
50
50
50
50
Busbar size
mm2
16×3
16×3
16×3
16×3
16×3
16×3
Type
3KA71 2
Rated continuous current Iu
A
160
200
250
Cable lug, max (multiwire) conductor size
mm2
120
120
120
Busbar size
mm2
20×5
20×5
20×5
Type
6
3KA71 3
Rated continuous current Iu
A
315
400
Cable lug, max (multiwire) conductor size
mm2
2×150
2×150
Busbar size
mm2
2×25×5
2×25×5
Type
3KA71 4
Rated continuous current Iu
A
630
Cable lug, max (multiwire) conductor size
mm2
2×185
Busbar size
mm2
2×32×6
Type
3KA71 5
Rated continuous current Iu
A
800
1000
1250
1600
2000
2500
3150
Cable lug, max (multiwire) conductor size
mm2
2×240
–
–
–
–
–
–
Busbar size
mm2
2×50×5
2×50×6
2×50×8
3×50×8
3×50×12
4×50×12
8×50×12
Type
3KA71 6
Rated continuous current Iu
A
1600
2000
2500
3150
Cable lug, max (multiwire) conductor size
mm2
–
–
–
–
Busbar size
mm2
2×80×10
2×80×10
3×80×10
2×100×10
Type
3KL71 1
Rated continuous current Iu
A
32
45
63
80
Cable lug, max (multiwire) conductor size
mm2
25
25
25
25
Busbar size
mm2
12×3
12×3
12×3
12×3
Type
3KL71 2
Rated continuous current Iu
A
100
125
160
Cable lug, max (multiwire) conductor size
mm2
70
70
70
Busbar size
mm2
16×4
16×4
16×4
Type
3KL71 3
Rated continuous current Iu
A
200
250
Cable lug, max (multiwire) conductor size
mm2
120
120
Busbar size
mm2
25×4
25×4
Type
3KL71 4
Rated continuous current Iu
A
315
400
Cable lug, max (multiwire) conductor size
mm2
240
240
Busbar size
mm2
32×5
32×5
Type
3KL71 5
Rated continuous current Iu
A
630
800
Cable lug, max (multiwire) conductor size
mm2
2×185
2×185
Busbar size
mm2
2×40×6
2×40×6
6/24
Siemens LV 56 · 2008
Assembly Kits for Switching Devices
Assembly kit for SENTRON 3K disconnectors
■ Description
■ Configuration
The assembly kit for 3K disconnectors is made up of:
• Mounting plate
• Crossbars
• Cover with holes to fit a door locking mechanism and fast
closing screws
• Fastening screws
a Due to the size of its handle, the 1250A/50 kA 3KA715
disconnector requires an additional H = 200mm cover to be
placed in the upper part (kit height + 200 mm).
The depth adjustable mounting plate is mounted on crossbars
and is suitable for front or rear terminal bars for the connection of
cables or busbars.
The respective terminal covers must be ordered too for the
disconnector
b Due to the size of its handle, the 3KA715 disconnector can be
installed only in versions up to 1250A/35 kA.
■ Selection and ordering data
Height of Width Depth1
module
mm mm
mm
Max. no.
of circuit
breakers
Equipment
mounting plate
Door-coupling rotary operating mechanism
Door-coupling rotary operating mechanism
Door-coupling rotary operating mechanism
Door-coupling rotary operating mechanism
Door-coupling rotary operating mechanism
Door-coupling rotary operating mechanism
Door-coupling rotary operating mechanism
Door-coupling rotary operating mechanism
300
350
550
200
250
300
350
450
1
1
1
1
1
1
1
1
8PQ6000-2BA65
8PQ6000-2BA71
8PQ6000-2BA50
8PQ6000-2BA52
8PQ6000-2BA55
8PQ6000-2BA58
8PQ6000-2BA62
8PQ6000-2BA67
8PQ2030-6BA06
8PQ2035-6BA08
8PQ2055-6BA02
8PQ2020-6BA10
8PQ2025-6BA03
8PQ2030-6BA04
8PQ2035-6BA06
8PQ2045-6BA02
Ad hoc cover for type of op. mech.
Height of Width Depth1
module
mm mm
mm
Max. no.
of circuit
breakers
Equipment
mounting plate
Cover
250
350
450
200
250
300
350
450
200
250
300
350
450
1
1
1
1
1
1
1
1
1
1
1
1
1
8PQ6000-2BA66
8PQ6000-2BA72
8PQ6000-2BA51
8PQ6000-2BA53
8PQ6000-2BA56
8PQ6000-2BA60
8PQ6000-2BA63
8PQ6000-2BA68
8PQ6000-2BA54
8PQ6000-2BA57
8PQ6000-2BA61
8PQ6000-2BA64
8PQ6000-2BA70
Ad hoc cover for type of op. mech.
Cover
02072
No. of Connecpoles tion
02071
Circuit breaker
Sentron 3K disconnector, horizontal installation
3KL50, 3KL52
3KL55, 3KL57
3KL61
3KL711, 3KA711
3KL712, 3KA712
3KL713, 3KA713
3KL714, 3KA714
3KL715, 3KA715
3/4
3/4
3/4
3/4
3/4
3/4
3/4
a 3/4
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
600
600
600
600
600
600
600
600
400
400
400
400
400
400
400
400
No. of Connecpoles tion
02073
Circuit breaker
02074
■ Selection and ordering data
Sentron 3K disconnector, vertical installation
3KL50, 3KL52
3KL55, 3KL57
3KL61
3KL711, 3KA711
3KL712, 3KA712
3KL713, 3KA713
3KL714, 3KA714
3KL715, 3KA715
3KL711, 3KA711
3KL712, 3KA712
3KL713, 3KA713
3KL714, 3KA714
3KL715, 3KA715
1
Minimum depth
3/4
3/4
3
3/4
3/4
3/4
3/4
b 3/4
3/4
3/4
3/4
3/4
3/4
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
front, rear
Door locking mech.
Door locking mech.
Door locking mech.
Door locking mech.
Door locking mech.
Door locking mech.
Door locking mech.
Door locking mech.
Door locking mech.
Door locking mech.
Door locking mech.
Door locking mech.
Door locking mech.
600
600
600
600
600
600
600
600
800
800
800
800
800
400
400
400
400
400
400
400
400
400
400
400
400
400
8PQ2025-6BA05
8PQ2035-6BA10
8PQ2045-6BA01
8PQ2020-6BA11
8PQ2025-6BA04
8PQ2030-6BA05
8PQ2035-6BA07
8PQ2045-6BA03
8PQ2020-8BA04
8PQ2025-8BA02
8PQ2030-8BA02
8PQ2035-8BA04
8PQ2045-8BA01
Siemens LV 56 · 2008
6/25
6
Assembly Kits for Switching Devices
Assembly kit for in-line fuse switch disconnectors
SENTRON 3NJ4
■ Overview
02075
6
6/26
Siemens LV 56 · 2008
Assembly Kits for Switching Devices
Assembly kit for in-line fuse switch disconnectors
SENTRON 3NJ4
■ Technical Data
Standards
IEC 60947-1, IEC 60947-3, VDE 0660 Teil 107
Type
3NJ41 0
3NJ5 0
3NJ41 2
3NJ41 3
3NJ41 4
Conventional thermal current
in free air Ith 1)
in enclosed place Ithe 2)
A
A
160
160
250
225
400
360
630
567
Rated insulation voltage Ui
V
750
1000
1000
1000
Rated operating voltage Ue
AC 40 Hz
... 60 Hz V
690
690
690
690
kA
(actual value)
A
kA
(peak value)
size/A
50
50
50
50
160
15
250
28
400
39
630
52
00/160
1/250
1 und
2/250 und
400
2 und
3/400 und
630
IP30
IP30
IP30
IP30
Rated conditional short-circuit current with fuses
from AC 40 Hz to 60 Hz 690 V
max. rated current of fuses In
admissible fuse cut-off current
For fuse kit
according to standard IEC 60269-2-1 or sectioning
brackets
Degree of protection
with open handle insert
with side cover and clamps
with closed handle insert
IP10
IP10
IP10
IP10
Power dissipated from main current lines Ith
W
18
23
49
110
Main conductor connection
Connecting screws
Flat rails
Terminal, max. size of (multiwire) conductor
Tightening torque
Bracket / V-clamp
mm
mm2
Nm
mm2
M8
24
95
10 ... 15
1,5 ... 70
M10
42
240
30 ... 35
25 ... 300
M12
42
240
30 ... 35
25 ... 300
M12
42
2403)
30 ... 35
25 ... 300
Nm
M8
16 ... 18
M12
35 ... 40
M12
35 ... 40
M12
35 ... 40
Fastening screws
for installation on busbars
tightening torque required
6
1) When using different devices, take into account the load factor specified in standard EN 60439 part 1/DIN VDE 0660 part 500, Table 1
2) The minimum space needed for the casing is 0,185 m3.
3) A special kit supplied on request is necessary for the 2 x 240 mm2 connection.
Rated currents for the horizontal distribution rails
No. of bars
Dimensions Rated current at 35° C ambient temperature
[mm]
IP ≤ IP41
IP 55
1
60 x 10
1560
1280
1
80 x 10
1740
1430
1
100 x 10
2180
1790
The data refer to normal operating conditions for indoor models as specified in standard IEC 60439-1, in particular with reference to an
ambient temperature of 35 °C (24 h average). In different operating conditions, take into account the correction factors given in the
chapter on “Planning and configuration”.
Siemens LV 56 · 2008
6/27
Assembly Kits for Switching Devices
Assembly kit for in-line fuse switch disconnectors
SENTRON 3NJ4
■ Description
■ Configuration
The device holder is made up of crossbars and depth adjustable
corner supports for the horizontal installation of distribution
busbars. The panels are secured to the frame by means of a
snap-in system.
The device holder is suitable for use behind a closed door.
Kit for the connection of cables from the bottom and from the top.
Copper busbars are not included in the kit.
Two supports for the distribution busbars must be ordered.
■ Selection and ordering data
Width Switches
mm for kit
Device holder
800
800
600
800
8PQ6000-2BA48
8PQ6000-2BA48
Support for
distribution
busbars
Direct activation
panel
02078
Height
mm
02077
Num- Installation
ber of technique
poles
02076
Switch
Sentron 3NJ4 disconnector with fuses
3NJ4, BG 1, 2, 3
3NJ4, BG 1, 2, 3
3
3
fixed
fixed
4
6
3NJ5974-0AB
3NJ5974-0AB
02079
02080
6
Configuration for cable entry from the bottom
6/28
Siemens LV 56 · 2008
Configuration for cable entry from the top
8PQ2000-6BA06
8PQ2000-8BA06
Assembly Kits for Switching Devices
Assembly kit for in-line fuse switch disconnectors
SENTRON 3NJ6
■ Overview
1
2
3
6
1 Fixed cover for busbars
2 3NJ6 in-line fuse disconnectors
3N76
4
3 Cable connection compartment door
4 Fixed cover for PE busbars
Siemens LV 56 · 2008
6/29
Assembly Kits for Switching Devices
Assembly kit for in-line fuse switch disconnectors
SENTRON 3NJ6
■ Technical Data
Standards
IEC 60947-1
Type
Breaking capacity
3NJ60 0.-1
S
3NJ60 1.-1
S
3NJ60 1.-3
H
3NJ60 2.-1
S
3NJ60 2.-3
H
3NJ60 3.-1
S
3NJ60 3.-3
H
Rated uninterrupted current Iu1)
for kit wtih fuses according to standard IEC
60269
A
160
Rated operating current Ue
• with a rated current of
AC V
Hz
690
50/60
Rated insulation voltage Ui
V
1000
Rated impulse current Uimp
V
8000
Rated conditional short circuit current
• Short-circuit resistance (actual value)
• Short-circuit switching capacity (actual
value)
kA
kA
100
55
66
55
66
55
66
55
66
A
A
A
A
160
–
160
–
160
160
160
125
250
–
200
–
250
250
200
200
400
–
400
–
400
400
400
315
630
–
630
–
630
630
630
500
A
A
A
A
480
–
480
–
480
1280
480
1000
750
–
600
–
750
2000
600
1600
1200
–
1200
–
1200
3200
1200
2520
1890
–
1890
–
1890
5040
1890
4000
Rated operating current Ie
• with AC 500 V
AC-22B
AC-23B
• with AC 690 V
AC-22B
AC23B
Short-circuit breaking power
• with AC 500 V
cosϕ = 0,65
cosϕ = 0,35
• with AC 690 V
cosϕ = 0,95
cosϕ = 0,35
Operating life
• overall
• mechanical
6
3NJ60 0.-3
H
• electrical (690 V, cosϕ = 0,65)
Power dissipated
(including NH fuses with lower dissipation
power according to VDE 0636 part 2)
400
630
operat- 1600
ing cycles
operat- 1400
ing cycles
operat- 200
ing cycles
1600
1000
1000
1400
800
800
200
200
200
W
73
114
215
39
Permissible operating position
horizontal
Degree of protection (in operating conditions)
IP41
Main conductor connection
• Terminal connection
– Conductor size
Al/Cu, single or multiwire
according to DIN 46235 (Cu) and DIN
46239 (Al)
– screw dimensions
– tightening torque
• Clamp connection
– conductor size (Al/Cu), rn
– conductor size (Al/Cu), re
– conductor size (Al/Cu), sm
– conductor size (Al/Cu), se
– tightening torque required
250
mm2
1 x 10 ... 95
1 x 95 ... 240
1 x 300,
2 x 95 ... 240
1 x 300,
2 x 95 ... 240
Nm
M8
15
M12
30
2 x M12
30
2 x M12
30
mm2
mm2
mm2
mm2
Nm
1 x 10 ... 50
1 x 10 ... 50
1 x 35 ... 95
1 x 50 ... 95
10
1 x 16 ... 35
1 x 16 ... 70
1 x 35 ... 240
1 x 35 ... 300
25
2 x 16 ... 35
2 x 16 ... 70
2 x 35 ... 240
2 x 35 ... 300
25
2 x 16 ... 35
2 x 16 ... 70
2 x 35 ... 240
2 x 35 ... 300
25
1) Standard IEC 60439 requires that rated uninterrupted current be reduced if busbars are installed in the control board.
Rated currents for the vertical distribution busbar system
No. of bars
Dimensions Rated current at 35° C ambient temperature
[mm]
IP ≤ IP41
1
60 x 10
1560
1
80 x 10
2100
The data refer to normal operating conditions for indoor models as specified in standard IEC 60439-1, in particular with reference to an
ambient temperature of 35 °C (24 h average). In different operating conditions, take into account the correction factors given in the
chapter on “Planning and configuration”.
6/30
Siemens LV 56 · 2008
Assembly Kits for Switching Devices
Assembly kit for in-line fuse switch disconnectors
SENTRON 3NJ6
■ Description
■ Configuration
The assembly kit for Sentron 3NJ6 in-line fuse disconnectors in
horizontal configuration contains vertical bars and busbar
supports suitable for 3- and 4-pole versions.
Depending on the interior organisation of the rack, configure the
rack, interior bearing structures with a usable height of 1600
mm, exterior bearing structures and partitions.
The device compartment consists of a modular door, vertical
and horizontal partitions, a device holder.
The assembly kit can be used with racks 1000mm or 1200mm
width and 400mm, 600mm or 800mm deep, and it occupies a
width of 600 mm.
For each assembly kit for Sentron 3NJ6 in-line fuse
disconnectors, configure 8 protective covers 3NJ6916-4EA00.
The 400mm and 600mm wide cable connecting compartment
can be equipped with standard components for N and PE
busbars, and cable supporting brackets.
Depending on field conditions, it is necessary to configure a
fixed cover before the busbars, a fixed cover before the PE
busbars and a door (for the cable connecting compartment).
Max degree of protection IP41
Copper busbars are not included in the kit.
■ Selection and ordering data
Number
of poles
Installation
technique
Height
mm
Width
mm
Ordering code
UI
8PQ3000-1BA48
1
Assembly kit for Sentron 3NJ6 in-line fuse disconnectors, plug-in installation, horizontal configuration
3/4
steck
1600
600
02082
6
Compartment with modular door for on site installation of Sentron 3NJ6 in-line fuse disconnectors
600
600
8PQ3000-1BA50
8PQ3000-1BA51
1
1
3NJ6916-4EA00
1
02083
200
400
02084
Protective covers for Sentron 3NJ6 in-line fuse disconnectors
Siemens LV 56 · 2008
6/31
Assembly Kits for Switching Devices
Assembly kits for modular installations devices
■ Overview
02090
6
6/32
Siemens LV 56 · 2008
Assembly Kits for Switching Devices
Assembly kit for modular installation devices
■ Description
■ Configuration
The kit for modular devices mounted on DIN rails is made up of:
• Support brackets
• Variable depth 35mm DIN rail in ALU
• Cover with cut-out DIN and fast closing screws (1/4 turn)
• Fastening screws
The multiple DIN rail makes it possible to snap the Sikclip wiring
system onto the rear side.
The DIN rail can be modifies and adjusted for depth as desired.
The horizontal raceway fastening kit contains the support and the
necessary fasteners.
The DIN rail can be adjusted for a distance from the front cover of
47.5mm, 56.5mm and 75.5mm.
The support bracket makes it possible to fit a vertical raceway up
to 60mm in width.
For each row, order 1 DIN rail kit of matching width.
■ Selection and ordering data
Height of module
mm
Width
mm
Modular units
DIN rail
Cover
02092
02091
Row centre distance
mm
DIN rail assembly kit for modular devices, 1 row
150
150
600
24
8PQ6000-3BA36
8PQ2015-6BA07
200
200
600
24
8PQ6000-3BA36
8PQ2020-6BA12
150
150
800
36
8PQ6000-3BA37
8PQ2015-8BA03
200
200
800
36
8PQ6000-3BA37
8PQ2020-8BA05
Width
mm
Modular units
DIN rail
Cover
■ Selection and ordering data
Height of module
mm
6
02093
02091
Row centre distance
mm
DIN rail assembly kit for modular devices, 2 row
150
300
600
48
2 x 8PQ6000-3BA36
8PQ2030-6BA07
200
400
600
48
2 x 8PQ6000-3BA36
8PQ2040-6BA10
150
300
800
72
2 x 8PQ6000-3BA37
8PQ2030-8BA03
200
400
800
72
2 x 8PQ6000-3BA37
8PQ2040-8BA10
Width
mm
Modular units
DIN rail
Cover
■ Selection and ordering data
Height of module
mm
02094
02091
Row centre distance
mm
DIN rail assembly kit for modular devices, 3 row
150
450
600
72
3 x 8PQ6000-3BA36
8PQ2045-6BA04
200
600
600
72
3 x 8PQ6000-3BA36
8PQ2060-6BA04
150
450
800
108
3 x 8PQ6000-3BA37
8PQ2045-8BA02
200
600
800
108
3 x 8PQ6000-3BA37
8PQ2060-8BA02
Row centre
distance
Height of module
mm
Width
mm
Modular units
–
–
–
Ordering code
UI
8PQ6000-0BA16
2
Horizontal raceway fastening brackets
600/800
01660
–
Siemens LV 56 · 2008
6/33
Assembly Kits for Switching Devices
Assembly kit for modular installation devices
■ Description
– fixing with clips onto the back of the DIN rail (top hat rail).
Sikclip is a quick wiring system simplifying the connection of
flush-mounted circuit breakers.
Distribution terminal blocks with IMQ label, in 2-pole or 4-pole
versions, for currents up to 125 A. Icw up to 4.3 kA and
Ipk up to 22 kA. For direct fastening onto the DIN rails.
– for direct mounting on the rear vertical CU busbar
■ Technical specifications
Max. rated operating current In
250 A at 40 °C ambient temperature
Max. rated output current In
63 A at 40 °C ambient temperature
Rated operating voltage Un
AC 400 V
Rated insulation voltage
AC 660 V
Test voltage
2,5 kV, 50 Hz
Degree of protection
IP20
Connecting conductors
40 A (6 mm2), 63 A (10 mm2)
Type of connecting conductor
H07VK
Colour
RAL 7035
Operating temperature
–5 °C to +60 °C
Applicable standards
EN 60947-1, EN 60439-3
■ Selection and ordering data
Model
Length
Colour
Ordering code
Sikclip wiring system
6
12 TE
5ST2 520
24 TE
5ST2 521
36 TE
5ST2 522
Connecting conductors
6 mm2
120 mm
10 mm2
120 mm
6 mm2
220 mm
10 mm2
220 mm
black
5ST2 523
blue
5ST2 524
black
5ST2 525
blue
5ST2 526
black
5ST2 527
blue
5ST2 528
black
5ST2 530
blue
5ST2 531
Push-in connector
Brackets
5ST2 532
for anchoring to back of DIN rail (pair)
Model
TE
Distribution terminal blocks
100 A
7 openings per pole
5 × 1,5 up to 6 mm2 +
2 × 6 up to 16 mm2
125 A
6/34
Siemens LV 56 · 2008
5ST2 533
Icw (1 s) Ipk
kA
kA
Ordering code
2 poles
4
3,1
20
8GF9 871
4 poles
5
3,1
20
8GF9 872
11 openings per pole
2 poles
7
4,3
22
8GF9 873
7 × 1,5 up to 6 mm2 +
2 × 6 up to 16 mm2 +
2 × 16 up to 35 mm2
4 poles
7
4,2
22
8GF9 874
15 openings per pole
2 poles
8
4,2
22
8GF9 875
11 × 1,5 up to 6 mm2 +
2 × 6 up to 16 mm2 +
2 × 16 up to 35 mm2
4 poles
8
4,3
22
8GF9 876
7
Covers, Modular Doors,
Mounting Plate, 19” Rack
7/2
Covers
7/4
Modular doors
7/7
Modular mounting plates
7/8
Mounting plate for
electrotechnical applications
7/9
19” rack
Siemens LV 56 · 2008
Covers, Modular Doors, Mounting Plate, 19” Rack
Covers
■ Description
■ Configuration
The kit consists a cover and guick-release locks.
The covers are secured to the board frame by means of captive
fast closing screws (1/4 of a turn).
If the fast closing screws are replaced with hinges, the holes
must be closed with plugs.
Use a pair of hinges per cover.
1/4 turn screws are tightened and loosened by means of a
flathead screwdriver.
In addition to fastening the cover, the screw also performs a
grounding function for the cover.
Using the hinge options, the cover can be hinged on the right or
the left as desired.
The hinges are mounted without having to use any additional
mechanical parts and also perform a grounding function for the
cover.
■ Selection and ordering data
Cut-out
Height of module
mm
Width
mm
Ordering code
UI
–
50
600
8PQ2005-6BA01
1
–
100
600
8PQ2010-6BA01
1
–
150
600
8PQ2015-6BA02
1
–
200
600
8PQ2020-6BA01
1
–
250
600
8PQ2025-6BA01
1
–
300
600
8PQ2030-6BA01
1
–
350
600
8PQ2035-6BA01
1
–
400
600
8PQ2040-6BA01
1
–
500
600
8PQ2050-6BA01
1
–
550
600
8PQ2055-6BA01
1
–
600
600
8PQ2060-6BA01
1
–
650
600
8PQ2065-6BA01
1
–
800
600
8PQ2080-6BA01
1
–
50
800
8PQ2005-8BA01
1
–
100
800
8PQ2010-8BA01
1
–
150
800
8PQ2015-8BA02
1
–
200
800
8PQ2020-8BA01
1
–
250
800
8PQ2025-8BA01
1
–
300
800
8PQ2030-8BA01
1
–
350
800
8PQ2035-8BA01
1
–
400
800
8PQ2040-8BA01
1
–
500
800
8PQ2050-8BA01
1
–
550
800
8PQ2055-8BA01
1
–
600
800
8PQ2060-8BA01
1
–
650
800
8PQ2065-8BA01
1
–
800
800
8PQ2080-8BA01
1
2 instruments 72 x 72 mm + 2 change-over switches
200
600
8PQ2020-6BA03
1
4 instruments 72 x 72 mm + 1 change-over switch
200
600
8PQ2020-6BA02
1
2 instruments 72 x 72 mm + 2 change-over switches 200
800
8PQ2020-8BA03
1
4 instruments 72 x 72 mm + 1 change-over switch
800
8PQ2020-8BA02
1
Covers with cut-outs
01693
7
01661
Covers without cut-outs
7/2
Siemens LV 56 · 2008
200
Covers, Modular Doors, Mounting Plate, 19” Rack
Covers
■ Description
■ Configuration
The kit consists a cover and guick-release locks.
The covers are secured to the board frame by means of captive
fast closing screws (1/4 of a turn).
If the fast closing screws are replaced with hinges, the holes
must be closed with plugs.
Use a pair of hinges per cover.
1/4 turn screws are tightened and loosened by means of a slot
or cross-slot screwdriver.
In addition to fastening the cover, the screw also performs a
grounding function for the cover.
Using the hinge options, the cover can be hinged on the right or
the left as desired.
The hinges are mounted without having to use any additional
mechanical parts and also perform a grounding function for the
cover.
■ Selection and ordering data
Height of module
mm
Width
mm
Ordering code
2 instruments 96 x 96 mm + 2 change-over switches
400
600
8PQ2040-6BA04
1
4 instruments 96 x 96 mm + 1 change-over switch
400
600
8PQ2040-6BA03
1
2 instruments 96 x 96 mm + 2 change-over switches
400
800
8PQ2040-8BA04
1
4 instruments 96 x 96 mm + 1 change-over switch
400
800
8PQ2040-8BA03
1
Cut-out
UI
01810
01809
Covers 400mm with cut-outs
7
Covers with ventilation fins
100
600
8PQ2010-6BA02
1
ventilated
100
800
8PQ2010-8BA02
1
–
–
–
8PQ2000-0BA01
10
–
–
8PQ2000-0BA02
10
01811
ventilated
01697
Cover hinges kit
Closing plugs for cover holes
01812
–
Siemens LV 56 · 2008
7/3
Covers, Modular Doors, Mounting Plate, 19” Rack
Modular doors
■ Overview
1
2
3
3
2
7
2
1 Exterior front cover for main busbars
2 Modular door
3 Cover for degree of protection IP55
02095
4 Exterior front cover for PE bar
4
7/4
Siemens LV 56 · 2008
Covers, Modular Doors, Mounting Plate, 19” Rack
Modular doors
■ Description
■ Configuration
The “exterior front covers” kit for the main busbars and the PE
bar contains the cover and an anchoring support.
Each cubicle with modular doors must be fitted with a front cover
before the busbars and the PE bar.
Height of module
mm
02097
02096
■ Selection and ordering data
Width
mm
Ordering code
IP55 upgrade
Exterior front cover for main busbars
8PQ2022-6BA01
8PQ2022-6BA02
8PQ2022-8BA01
8PQ2022-8BA02
Height of module
mm
Width
mm
Ordering code
IP55 upgrade
02098
600
800
02158
225
225
Exterior front cover for PE bars
175
600
8PQ2000-6BA07
8PQ2015-6BA13
175
800
8PQ2000-8BA07
8PQ2015-8BA08
7
Siemens LV 56 · 2008
7/5
Covers, Modular Doors, Mounting Plate, 19” Rack
Modular doors
■ Description
■ Configuration
The modular doors kit contains a door with degree of protection
IP4X, door hinge support, hinges, green column identification
strip and two-way interlocking mechanism.
The “front covers” kit contains the cover and an anchoring
support.
A combination of front frame and covers with modular doors in a
cubicle is not possible.
When using the equipment with modular doors, the remaining
heights must be closed with 50mm or 100mm height front
covers.
Height of module
mm
02053
02159
■ Selection and ordering data
Width
mm
Ordering code
IP55 upgrade
Modular doors
8PQ2015-6BA10
8PQ2015-6BA12
8PQ2020-6BA14
8PQ2020-6BA15
250
600
8PQ2025-6BA07
8PQ2025-6BA08
300
600
8PQ2030-6BA10
8PQ2030-6BA12
350
600
8PQ2035-6BA12
8PQ2035-6BA13
400
600
8PQ2040-6BA12
8PQ2040-6BA13
450
600
8PQ2045-6BA05
8PQ2045-6BA06
500
600
8PQ2050-6BA03
8PQ2050-6BA04
550
600
8PQ2055-6BA04
8PQ2055-6BA06
600
600
8PQ2060-6BA06
8PQ2060-6BA07
650
600
8PQ2065-6BA03
8PQ2065-6BA04
700
600
8PQ2070-6BA03
8PQ2070-6BA04
750
600
8PQ2075-6BA01
8PQ2075-6BA02
800
600
8PQ2080-6BA03
8PQ2080-6BA04
150
800
8PQ2015-8BA05
8PQ2015-8BA07
200
800
8PQ2020-8BA07
8PQ2020-8BA08
250
800
8PQ2025-8BA04
8PQ2025-8BA05
300
800
8PQ2030-8BA05
8PQ2030-8BA06
350
800
8PQ2035-8BA06
8PQ2035-8BA07
400
800
8PQ2040-8BA12
8PQ2040-8BA13
450
800
8PQ2045-8BA03
8PQ2045-8BA04
500
800
8PQ2050-8BA03
8PQ2050-8BA04
550
800
8PQ2055-8BA03
8PQ2055-8BA06
600
800
8PQ2060-8BA04
8PQ2060-8BA05
650
800
8PQ2065-8BA03
8PQ2065-8BA04
700
800
8PQ2070-8BA01
8PQ2070-8BA02
750
800
8PQ2075-8BA01
8PQ2075-8BA02
800
800
8PQ2080-8BA03
8PQ2080-8BA04
Height of module
mm
Width
mm
Ordering code
IP55 upgrade
02100
600
600
02099
7
150
200
Front covers
7/6
50
600
8PQ2005-6BA04
8PQ2005-6BA03
100
600
8PQ2010-6BA04
8PQ2010-6BA03
50
800
8PQ2005-8BA04
8PQ2005-8BA03
100
800
8PQ2010-8BA04
8PQ2010-8BA03
Siemens LV 56 · 2008
Covers, Modular Doors, Mounting Plate, 19” Rack
Modular mounting plates
■ Description
■ Configuration
The modular mounting plate kit is made up of:
• Mounting plate
• Crossbars
• Cover and fast closing screws
• Fastening screws
In mounting plates with holes, hole spacing is 25 x 25 mm.
Hole diameter is 5.4 mm and the holes are suitable for M6 selftapping screws.
The mounting plate can be ordered with or without holes and
can be adjusted for depth.
■ Selection and ordering data
Height of module
mm
Width
mm
Ordering code
UI
02101
Mounting plate kit without holes
200
600
8PQ3000-1BA56
1
400
600
8PQ3000-1BA61
1
600
600
8PQ3000-1BA65
1
800
600
8PQ3000-1BA26
1
200
800
8PQ3000-1BA58
1
400
800
8PQ3000-1BA63
1
600
800
8PQ3000-1BA67
1
800
800
8PQ3000-1BA28
1
200
600
8PQ3000-1BA57
1
400
600
8PQ3000-1BA62
1
600
600
8PQ3000-1BA66
1
800
600
8PQ3000-1BA27
1
200
800
8PQ3000-1BA60
1
400
800
8PQ3000-1BA64
1
600
800
8PQ3000-1BA68
1
800
800
8PQ3000-1BA30
1
02102
Mounting plate kit with holes
Siemens LV 56 · 2008
7/7
7
Covers, Modular Doors, Mounting Plate, 19” Rack
Mounting plate for electrotechnical applications
■ Description
■ Configuration
The “mounting plate” kit for electrotechnical applications
contains the mounting plate and the brackets to fasten it to the
cubicle.
By means of 6 additional crossbars the mounting plate can be
adjusted for depth.
The crossbars are described in the chapter on “Accessories”.
The brackets are fastened to the side upright or to the rear part
of the cubicle.
To facilitate the installation of the mounting plate, the lower
fastening brackets are designed for slanted plate insertion when
the plate has been made ready and wired on the work bench.
The connecting panel kit makes it possible to create an
uninterrupted surface when two or more adjacent boards have
to be mechanically connected.
■ Selection and ordering data
Height of module
mm
Width
mm
Ordering code
UI
1
01672
Mounting plate
1600
400
8PQ3000-0BA33
1600
600
8PQ3000-0BA35
1
1600
800
8PQ3000-0BA37
1
1600
1000
8PQ3000-1BA06
1
1600
1200
8PQ3000-1BA07
1
1900
400
8PQ3000-0BA32
1
1900
600
8PQ3000-0BA34
1
1900
800
8PQ3000-0BA36
1
1900
1000
8PQ3000-1BA04
1
1900
1200
8PQ3000-1BA05
1
1600
–
8PQ3000-1BA10
1
1900
–
8PQ3000-1BA08
1
Connecting panel
01700
7
7/8
Siemens LV 56 · 2008
Covers, Modular Doors, Mounting Plate, 19” Rack
19” rack
■ Description
■ Configuration
For the installation of a 19” rack, a fixed version kit for 600mm
wide cubicles and a swivel version kit for 800mm wide cubicles
are available.
1 height unit (HE) = 44.45 mm.
Swivel version kit for use with right or left hinges.
The maximum weight of the rack is 160 kg.
■ Selection and ordering data
Equipment height
mm
Height of electronic unit
HE
Cubicle width
mm
Version
1800
39
600
fixed
8PQ3000-1BA11
1
1800
39
800
swivel
8PQ3000-1BA12
1
Ordering code
UI
NSEX_00007
Kit per 19” rack
7
Siemens LV 56 · 2008
7/9
Covers, Modular Doors, Mounting Plate, 19” Rack
Notes
7
7/10
Siemens LV 56 · 2008
8
Internal Separation
8/2
General Data
8/4
Main busbar system
8/7
Vertical distribution busbar
system
8/9
Modular Separation for
Switching Devices
Siemens LV 56 · 2008
Internal Separation
General Data
■ Overview
A fundamental characteristic of switchgear is the presence of
internal separation forms as required by the applicable standards.
The main purpose of internal partitions is to make sure that all
switching, control and maintenance operations can be performed in
full safety, while ensuring uninterrupted system operation.
Advantages
− Reduction of possible hazards during connection, scheduled
maintenance and extraordinary maintenance operations
− Attenuation of consequences of local faults and faster resumption
of regular operation
Applications:
− Protection against contact between live parts belonging to
adjacent functional units. Degree of protection required: IP2X or
IPXXB;
− Protection against the intrusion of foreign bodies from a functional
unit into an adjacent functional unit. Degree of protection required:
IP 2X or higher;
− Low risk of internal arc triggering.
Functional unit (definition): part of a switchgear containing all the
electrical and mechanical components that contribute to the
fulfilment of the same function, e.g., infeed and outfeed circuit
breakers, measuring unit, etc.
8
SIVACON S4
With SIVACON S4, internal separation form 2b is achieved by
separating the main busbar systems and the distribution busbars by
means of partitions and covers.
Assembly kits for switching and protection devices which comply
with internal separation form 1 in their basic version do not require
any additional separation to achieve internal separation form 2b.
If only 1 circuit breaker per cubicle is used, form 3b corresponds to
form 4b (3b = 4b).
8/2
Siemens LV 56 · 2008
Definitions according to IEC 60439-1, CEI EN 60439-1
■ Form 1
No internal separation
■ Form 2
Separation between busbars and functional
units
■ Form 2a
Separation between busbars and functional
units, no separation between connections
and busbars
■ Form 2b
Separation between busbars and functional
units, separation between connections and
busbars
■ Form 3
• Separation between busbars and all
functional units
• Separation between all the functional units
• Separation between the connections of
conductors going to the exterior and the
functional units, but no separation between
the connections and the functional units
■ Form 3a
No separation between connections and
busbars
■ Form 3b
Separation between connections and
busbars
■ Form 4
• Separation between busbars and all
functional units
• Separation between all the functional units
• Separation between the connections of
conductors going to the exterior which are
associated with functional units and the
connections of all the other functional units
and the busbars
■ Form 4a
Connections in the same cell as the
functional unit concerned
■ Form 4b
Connections not in the same cell as the
functional unit concerned
Special separation forms or higher degrees of protection must be
agreed upon by the manufacturer and the user.
Internal Separation
General Data
Form 1
Functional unit
Input and output connections
1
Main busbars
2
Distribution busbars
3
4
Input circuit
Output circuit
01734
°
Form 3a
01736
Form 2b
01735
Form 2a
Form 3b
01740
Form 4b
01739
Form 4a
01738
01737
8
Siemens LV 56 · 2008
8/3
Internal Separation
Main busbar system
02104
02103
02106
■ Overview
Main busbar system in standard
position, top front depth 400mm
Main busbar system in standard
position, top front depth 600mm
Main busbar system in standard
position, top front - rear depth
800mm
Main busbar system in standard
position, top front and rear depth
800mm
8/4
Siemens LV 56 · 2008
02107
02105
8
Main busbar system in standard
position in optional adjustable
position, rear depth 800mm
Internal Separation
Main busbar system
■ Description
■ Configuration
The form 2b separation kit for horizontal main busbar systems
contains the metal parts and the fastening screws need to
achieve this separation form.
One piece per cubicle corresponding to the relative dimensions
for equipment compartment or cable compartment.
To use a section as a riser duct it is necessary to use a side
upright matching the equipment height and depth, with no
bottom plate partition.
■ Selection and ordering data
Position of main busbars
Width
mm
Cubicle depth
mm
Height of
module
mm
Ordering code
UI
1
01726
Busbar system in standard position, form 2b separation
front
top
200
600
225
8PQ3000-1BA53
front
top
400
600
225
8PQ3000-0BA52
1
front
top
600
600
225
8PQ3000-0BA53
1
front
top
800
600
225
8PQ3000-0BA54
1
front
top
1000
600
225
8PQ3000-1BA14
1
front
top
1200
600
225
8PQ3000-1BA16
1
front or rear
top
200
800
225
8PQ3000-1BA54
1
front or rear
top
400
800
225
8PQ3000-0BA55
1
front or rear
top
600
800
225
8PQ3000-0BA56
1
front or rear
top
800
800
225
8PQ3000-0BA57
1
front or rear
top
1000
800
225
8PQ3000-1BA17
1
front or rear
top
1200
800
225
8PQ3000-1BA18
1
front or rear
top
200
800
225
8PQ3000-1BA55
1
front or rear
top
400
800
225
8PQ3000-0BA58
1
front or rear
top
600
800
225
8PQ3000-0BA60
1
front or rear
top
800
800
225
8PQ3000-0BA61
1
front or rear
top
1000
800
225
8PQ3000-1BA20
1
front or rear
top
1200
800
225
8PQ3000-1BA21
1
front
top
200
400
225
8PQ3000-1BA52
1
front
top
400
400
225
8PQ3000-0BA67
1
front
top
600
400
225
8PQ3000-0BA68
1
front
top
800
400
225
8PQ3000-0BA70
1
front
top
1000
400
225
8PQ3000-1BA13
1
front
top
1200
400
225
8PQ3000-1BA15
1
rear
variable
400
400*, 600*, 800
250
8PQ3000-0BA78
1
rear
variable
600
400*, 600*, 800
250
8PQ3000-0BA80
1
rear
variable
800
400*, 600*, 800
250
8PQ3000-0BA81
1
rear
variable
1000
400*, 600*, 800
250
8PQ3000-1BA22
1
rear
variable
1200
400*, 600*, 800
250
8PQ3000-1BA23
1
01728
01727
Busbar system in free position, form 2b separation
* with modular door.
Siemens LV 56 · 2008
8/5
8
Internal Separation
General Data
■ Overview
1
1
2
2
01725
8
2
1 Form 2b separation for horizontal main busbar system
2 Form 2b separation for vertical distribution busbars
8/6
Siemens LV 56 · 2008
Internal Separation
Vertical distribution busbar system
■ Description
■ Configuration
The form 2b vertical distribution busbar separation kit contains
the parts and the fasteners needed to achieve this separation
form.
For cubicles placed side-by-side, order an additional separation
kit to obtain form 2b for the vertical busbars or separation
between cubicles.
The protective front separation for the busbar compartment
cannot be fitted to the back of 400 mm deep cubicles.
■ Selection and ordering data
Position of main busbars
Width
mm
Cubicle depth
mm
Ordering code
UI
Vertical distribution busbar system with main busbars at the top, form 2b separation
200, 400
400
8PQ4000-0BA05
1
front
200, 400
600
8PQ4000-0BA07
1
front and rear
200, 400
800
8PQ4000-0BA64
1
front and rear
200
800
8PQ4000-0BA02
1
front and rear
400
800
8PQ4000-0BA01
1
01741
01723
01722
front
01729
8
Vertical distribution busbar system without main busbars, form 2b separation
200, 400
400
8PQ4000-0BA06
200, 400
600
8PQ4000-0BA03
1
1
front and rear
200, 400
800
8PQ4000-0BA76
1
01741
front and rear
front and rear
Additional front cover for vertical busbar compartment
200
–
8PQ3000-0BA50
1
400
–
8PQ3000-0BA51
1
01665
–
–
Siemens LV 56 · 2008
8/7
Internal Separation
Vertical distribution busbar system
■ Description
■ Configuration
The separation between cubicles kit is symmetrically split and is
provided with removable pre-sectioning units for use in
conjunction with horizontal busbar systems.
For 800 mm deep cubicles, order two 400 mm deep separation
kits.
■ Selection and ordering data
Cubicle depth
mm
Height
Ordering code
UI
400
cubicle height
8PQ3000-0BA15
1
600
cubicle height
8PQ3000-0BA16
1
01641
Vertical separation between cubicles
8
8/8
Siemens LV 56 · 2008
Internal Separation
Modular Separation for Switching Devices
■ Description
■ Configuration
The crossbars and separation supporting rails kit makes it
possible to fasten the rear of the kit supporting crossbars without
having to use screws.
Order 1 crossbars and separation supporting rails kit for
cubicles sized 600 mm or 800 mm.
Required to achieve separation forms 3 and 4.
It is also used to fasten the horizontal and vertical partitions in
the rear part of the cubicle in form ≥ 2b without having to use
screws.
■ Selection and ordering data
Equipment height
mm
Ordering code
UI
1600
8PQ3000-0BA82
2
1800
8PQ3000-0BA83
2
02109
01744
Crossbars and separation supporting rails kit, for forms 3 and 4 separation
02108
8
Siemens LV 56 · 2008
8/9
Internal Separation
Modular Separation for Switching Devices
■ Description
■ Design
The form 3 separation kit for Sentron 3WL circuit breakers
ensures rear and side separation.
The form 3 separation kit for Sentron 3WL circuit breakers can
be installed only in 600mm and 800mm deep cubicles.
This separation cannot be used for circuit breaker 3WL 1240.
■ Selection and ordering data
Size
No. of poles
Width
mm
Height of module
mm
Ordering code
UI
Sentron 3WL, fixed version, form 3 separation
3/4
600
550
8PQ5000-0BA08
1
Gr II
3
600
550
8PQ5000-0BA13
1
Gr I
3/4
800
550
8PQ5000-1BA65
1
Gr II
3/4
800
550
8PQ5000-0BA11
1
01648
Gr I
Sentron 3WL, draw out version, form 3 separation
3/4
600
550
8PQ5000-0BA07
1
Gr II
3
600
550
8PQ5000-0BA12
1
Gr I
3/4
800
550
8PQ5000-1BA66
1
Gr II
3/4
800
550
8PQ5000-0BA10
1
Size
Current
No. of poles
Ordering code
UI
01648
Gr I
■ Selection and ordering data
Version
Width
mm
Height of module
above the
circuit
breaker
mm
under the
circuit
breaker
mm
Sentron 3WL, connection to the cables, form 4 separation
1600
3/4
Fixed/Draw out
600
200
250
8PQ5000-0BA30
1
Gr I
1600
3/4
Fixed/Draw out
800
200
250
8PQ5000-1BA68
1
Gr II
3200
3/4
Fixed/Draw out
800
350
400
8PQ5000-0BA38
1
1
01650
Gr I
8
Sentron 3WL, connection to the vertical distribution busbars, form 4 separation
1600
3/4
Fixed/Draw out
600
250
300
8PQ5000-0BA14
Gr I
1600
3/4
Fixed/Draw out
800
250
300
8PQ5000-1BA67
1
Gr II
3200
3/4
Fixed/Draw out
800
300
350
8PQ5000-0BA21
1
02110
01649
Gr I
Cubicle with built-in busbars and form 3
and 4b separation
8/10
Siemens LV 56 · 2008
Internal Separation
Modular Separation for Switching Devices
■ Overview
01638
2
1
Separation for 400mm deep cubicles
3
2
3
3
01816
1 Horizontal partition
1
2 Vertical separation on connecting cable side
3 Rear vertical separation
8
Separation for 600mm and 800mm deep cubicles
Siemens LV 56 · 2008
8/11
Internal Separation
Modular Separation for Switching Devices
■ Description
■ Configuration
For assembly kits such as Sentron 3VL, 3VT, 3K, modular
devices on DIN rail and modular mounting plates, a modular
separation system is available.
For modular devices on DIN rail supporting crossbars must also
be provided.
Equipment assembly kits achieve form 1 separation.
400mm deep cubicles require a horizontal partition and a
vertical partition for each branch unit.
Form 2b is achieved through the separation of main bars and
vertical distribution busbars.
600mm and 800mm deep cubicles require a horizontal partition
and a vertical partition for each branch unit.
Form 4b is achieved through the combination of horizontal,
vertical and rear partitions.
For 50mm high vertical partitions, order 2 25mm kits.
Height of module
mm
Width
mm
Cubicle depth
mm
Branch current
A
Ordering code
UI
25
–
400, 600, 800
–
8PQ5000-2BA63
2
–
–
600
800
400, 600, 800
400, 600, 800
–
–
8PQ5000-2BA61
8PQ5000-2BA62
1
1
25
100
150
200
200
250
250
300
300
300
350
350
400
450
500
550
600
600
650
700
700
800
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
400, 600, 800
–
–
–
≤ 250
≥ 400
≤ 250
≥ 400
≤ 250
≥ 400
≥ 800
–
≥ 800
–
–
–
–
–
≥ 800
–
–
≥ 800
–
8PQ5000-2BA63
8PQ5000-2BA27
8PQ5000-2BA28
8PQ5000-2BA30
8PQ5000-2BA31
8PQ5000-2BA32
8PQ5000-2BA33
8PQ5000-2BA34
8PQ5000-2BA35
8PQ5000-2BA46
8PQ5000-2BA36
8PQ5000-2BA47
8PQ5000-2BA37
8PQ5000-2BA38
8PQ5000-2BA40
8PQ5000-2BA41
8PQ5000-2BA42
8PQ5000-2BA48
8PQ5000-2BA43
8PQ5000-2BA44
8PQ5000-2BA50
8PQ5000-2BA45
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
02111
Fastening crossbars
02112
Horizontal partition
Vertical separation on connecting cable side
02113
8
02114
Rear vertical separation
8/12
Siemens LV 56 · 2008
50
600
600, 800
–
8PQ5000-2BA51
100
600
600, 800
–
8PQ5000-2BA52
1
150
600
600, 800
–
8PQ5000-2BA53
1
200
600
600, 800
–
8PQ5000-2BA54
1
250
600
600, 800
–
8PQ5000-2BA55
1
300
600
600, 800
–
8PQ5000-2BA56
1
350
600
600, 800
–
8PQ5000-2BA57
1
450
600
600, 800
–
8PQ5000-2BA58
1
550
600
600, 800
–
8PQ5000-2BA60
1
Internal Separation
Modular Separation for Switching Devices
■ Description
■ Configuration
Form 4 separation kit per Sentron 3VL in draw out version,
consisting of horizontal, vertical and rear partitions.
For each Sentron 3VL kit in draw out version, order 1 separation
kit.
■ Selection and ordering data
Circuit breaker
No. of
poles
Height of
module
mm
Width
mm
Cubicle depth
mm
Cable
connection
Ordering code
UI
1
02115
Sentron 3VL, horizontal installation, form 4 separation
VL160, VL250
3/4
250
600
400
front
8PQ5000-1BA76
VL400
3/4
300
600
400
front
8PQ5000-1BA77
1
VL630
4
350
600
400
front
8PQ5000-1BA80
1
VL630
3
300
600
400
front
8PQ5000-1BA81
1
VL160, VL250
3/4
250
600
600, 800
front, rear
8PQ5000-1BA82
1
VL400
3/4
300
600
600, 800
front, rear
8PQ5000-1BA84
1
VL630
3/4
1)
VL160, VL250
3/4
350
600
400, 600, 800
front, rear
8PQ5000-1BA86
VL400, VL630
3/4
400
600
400, 600, 800
front
8PQ5000-1BA87
1
1
VL800
3/4
600
600
600, 800
front, rear
8PQ5000-1BA88
1
VL1250/VL1600
3/4
650
600
600, 800
front, rear
8PQ5000-2BA00
1
VL160, VL250
3/4
350
800
400, 600, 800
front, rear
8PQ5000-2BA01
1
VL400/630
3/4
400
800
400, 600, 800
front, rear
8PQ5000-2BA02
1
02117
02116
Sentron 3VL, pull-out, vertical installation, form 4 separation
8
1) siehe modulare Unterteilung Kapitel 8/13
Siemens LV 56 · 2008
8/13
Internal Separation
Modular Separation for Switching Devices
■ Description
■ Configuration
The “connecting terminal” kit achieves separation from form 4a
to form 3b.
In addition to the partitions, the required number of terminals
(with or without copper busbars) has to be ordered.
Separation from form 3b to form 4b is achieved through the
combination of connecting terminal and protective bellows.
When using the connecting busbar assembly kit for SENTRON
3VL circuit breakers, terminals need not be ordered.
■ Selection and ordering data
Busbar
mm × mm
Ordering code
UI
01716
01732
01683
Current
A
2 × 25 × 5
1 × 30/40 × 10
Connecting terminal, separation installation from 4a to 3b
–
without busbar
8PQ5000-0BA05
4
250 A
2 × 25 × 5
8PQ5000-0BA72
2
400 A
1 × 30 × 10
8PQ5000-0BA73
4
630 A
1 × 40 × 10
8PQ5000-0BA74
4
–
8PQ9400-0BA03
4
Bellows, separation installation from 3b to 4b
–
8
8/14
Siemens LV 56 · 2008
9
Air-Conditioning Products
9/2
Introduction
9/2
Filter Fans
9/3
Air-Conditioning/Cooling Units
9/4
Heat Exchangers
9/5
Fan Heaters
9/5
Thermostats
Siemens LV 56 · 2008
Air-Conditioning Products
Introduction
■ Overview
When selecting the individual air-conditioning units, the following factors must be taken into account: ambient temperature,
power dissipated from the devices installed, maximum admissible temperatures of the devices, heat dissipated via the cubicle, and degree of protection required.
Switchgear may be subject to overheating, condensate or
mould formation due to the presence of hot, cold or moist air in
the immediate surroundings.
In this case, the cubicle should be air-conditioned.
The following air-conditioning units are available for this purpose:
• Filter fans
• Air-conditioning/cooling units
• Heat exchangers
• Heaters/thermostats
The installation of air-conditioning devices improves the reliability of switchgear and controlgear, making for enhanced machine and system availability.
Filter fans
■ Description
■ Configuration
Using fans and equipping the switchgear enclosures with ventilation fins are the most economical methods to control the temperature inside a cubicle.
However, the temperature reached inside the board is higher
than ambient temperature.
When adopting filter fans the temperature via the board enclosure must not be considered.
Filter fans must be installed in the lower part of the board. If possible, outlet filters must be installed in the upper part, on the door
or a side panel.
The use of thermostats makes for longer filter fan and filter life.
Outlet filters should be at least the same size as the cut-out
made in the door for the filter fan.
A simple formula to determine the quantity of air needed is:
Air needed = 1,2 x Pv / ∆ t
∆ t = interior temperature - ambient temperature
Pv = Installed power dissipated
For an exact determination, computation software can be supplied on request.
Notice - the standard colour is RAL 7032: special colour orders
must be defined with -Z Z = specify the RAL.
■ Selection and ordering data
Size
V AC
9
Air flow-rate
through free intake
IP54
W/K
Air flow-rate
with outlet filter
IP54
Exterior
dimensions
mm x mm
Cut-out in
door
mm x mm
Ordering code
UI
15 (IP43)
15 (IP43)
43
43
108
108
231
231
368
368
437
437
105 x 105
105 x 105
150 x 150
150 x 150
250 x 250
250 x 250
250 x 250
250 x 250
325 x 325
325 x 325
325 x 325
325 x 325
92 x 92
92 x 92
125 x 125
125 x 125
223 x 223
223 x 223
223 x 223
223 x 223
291 x 291
291 x 291
291 x 291
291 x 291
8MR3101-0MA
8MR3101-0JA
8MR3102-0MA
8MR3102-0JA
8MR3103-0MA
8MR3103-0JA
8MR3104-0MA
8MR3104-0JA
8MR3105-0MA
8MR3105-0JA
8MR3106-0MA
8MR3106-0JA
1
1
1
1
1
1
1
1
1
1
1
1
346 (IP33)
540 (IP33)
417 x 367
530 x 350
345 x 265
345 x 265
8MR3140-1DA
8MR3180-1DA
1
1
105 x 105
150 x 150
250 x 250
325 x 325
92 x 92
125 x 125
223 x 223
291 x 291
8MR3111-0AA
8MR3112-0AA
8MR3113-0AA
8MR3115-0AA
1
1
1
1
Filter fans with standard filter mat for door-mounted installation
230
115
230
115
230
115
230
115
230
115
230
115
24 (IP43)
24 (IP43)
58
58
155
155
255
255
478
478
606
606
Filter fan for top plate installation with standard filter mat
230
230
450 (IP33)
800 (IP33)
Outlet filter with standard filter mat for door-mounted installation
9/2
Siemens LV 56 · 2008
Air-Conditioning Products
Air-Conditioning/cooling Units
■ Description
■ Applications
Air-conditioners are used for ambient temperatures higher than
the temperature admissible for the equipment installed in the
cubicle. All the units work with FCC free cooling systemsAir-conditioners dehumidify the air inside the cubicle.
Cooling units for door, side panel or roof mounting
Two separate cooling circuits ensure that no hot air remains
inside the cubicle.
High-performance radial fans provide for effective air circulation
inside the cubicle.
Temperature controller with built-in thermostat (roof mounted).
Side-panel mounted units
Standard electronic components, technical characteristics:
• Test module
• Temperature limit
• Time lat at start-up
• Door contact function
• Fault indicator contact
• On-site diagnostics
• UL approval.
Notice - the standard colour is RAL 7032: special colours orders
must be defined with -Z Z = specify the RAL.
■ Selection and ordering data
Power
W
Voltage
V
Ordering code
UI*
Panel or door (flush) mounted air-conditioners
1000
230
1500
2000
400/440
2500
8MR5 510–1TE
1 piece
8MR5 515–1TE
1 piece
8MR5 520–1TE
1 piece
8MR5 525–1TE
1 piece
9
Filter fans with standard filter mat
320
115/320
8MR4 032–1SA
1 piece
500
8MR4 050–1SA
1 piece
820
8MR5 082–1SA
1 piece
1100
8MR5 110–1SA
1 piece
1400
8MR5 140–1SA
1 piece
1400
400/440
1800
2500
3200
230
5000
8MR5 144–1SA
1 piece
8MR5 180–1SA
1 piece
8MR5 250–1SA
1 piece
8MR4 320–2SB
1 piece
8MR4 500–2SB
1 piece
Roof-mounted air-conditioners
810
230
1150
1600
3000
400
3200
400
5000
8MR5 081–1DA
1 piece
8MR5 115–1DA
1 piece
8MR5 160–1DA
1 piece
8MR5 300–1DA
1 piece
8MR4 320–2DB
1 piece
8MR4 500–2DB
1 piece
* You can order this quantity or multiples thereof.
Siemens LV 56 · 2008
9/3
Air-Conditioning Products
Heat Exchangers
■ Description
Air-air principle (8ME78)
Air-water principle (8MR5)
The heat exchangers working according to the air-air principle
use two fully separate air circuits: an exterior circuit and an inner
circuit.
The heat exchangers working according to the air-water
principle use 1 air circuit.
A fan draws in cold air from the exterior. By means of another fan
the hot interior air is conveyed to an element separated by
laminas, which, in its turn, conveys the air onto the exterior
circuit.
A fan conveys the hot air inside the cubicle to the heat
exchanger.
In this manner, the heat is transferred to the cooling medium
(water) and the temperature of the air inside the cubicle is
reduced.
Notice - the standard colour is RAL 7032: special colour orders
must be defined with -Z Z = specify the RAL.
■ Selection and ordering data
Version
Voltage
V
Size
Ordering code
UI*
Aluminium, not treated
220-240
16/06
8ME7 844-0
1 piece
Painted RAL 7032
220-240
16/06
8ME7 844-1
1 piece
Aluminium, not treated
220-240
20/06
8ME7 864-0
1 piece
Painted RAL 7032
220-240
20/06
8ME7 864-1
1 piece
Power
W
Voltage
V
H×W×D
mm
Ordering code
UI*
Heat exchangers
35 C°
Hot air from
the equipment
Cubicle
Cold air
recirculation
25 C°
NSE0_01391
Heat exchangers for side mounting
500 × 200 × 100
8MR5 065-2WS
1 piece
1000
500 × 200 × 100
8MR5 100-2WS
1 piece
1450
1350 × 390 × 189
8MR5 145-2WS
1 piece
1500
950 × 400 × 115
8MR5 150-2WS
1 piece
650
2450
230
230
3000
9
1350 × 390 × 189
8MR5 245-2WS
1 piece
950 × 400 × 190
8MR5 300-2WS
1 piece
4000
860 × 560 × 137
8MR5 400-2WS
1 piece
5000
1400 × 460 × 235
8MR5 500-2WS
1 piece
Heat exchangers for roof mounting
1450
2100
230
600 × 390 × 140
8MR5 145-2WD
1 piece
720 × 465 × 190
8MR5 210-2WD
1 piece
* You can order this quantity or multiples thereof.
9/4
Siemens LV 56 · 2008
Air-Conditioning Products
Fan Heaters
■ Applications
■ Configuration
Cubicle heaters are used to prevent malfunctions probably
caused by condensation formation and corrosion phenomena
as well as to maintain a minimum interior temperature.
The design of the aluminium profile ensures even temperature
distribution, making for optimised heating effects.
To prevent corrosion problems, the difference between exterior
and interior temperatures must be about 5K.
The required heating power can be determined from the Pv /∆T
diagram given in chapter 12/9.
PHeizung = Pv x k3 x k4 x k5 x k6
■ Selection and ordering data
Power
W
Voltage
V
10
110-250
Series
Ordering code
UI*
Heaters
20
30
15
110-250
HGK047
8MR2 110-0B
2 pieces
HGK047
8MR2 110-2B
2 pieces
HGK047
8MR2 110-3B
2 pieces
HG140
8MR2 130-1A
2 pieces
20
HG140
8MR2 130-3A
2 pieces
45
HG140
8MR2 130-4A
1 piece
60
HG140
8MR2 130-6A
1 piece
75
HG140
8MR2 130-7A
1 piece
100
HG140
8MR2 130-0A
1 piece
150
HG140
8MR2 130-5A
1 piece
Thermostats
■ Applications
The (NC/NO) thermostats installed in cubicles are used to
control the interior temperature and make sure that the
admissible temperatures of the devices are not exceeded.
They are used to control the operation of cooling units, filter fans,
heat exchangers.
■ Selection and ordering data
Version
Temperature
°C
Series
Ordering code
UI*
0 ... + 60
KTO 01140
8MR2 170-1BA
3 pieces
– 10 ... + 50
KTO 01140
8MR2 170-1CA
3 pieces
+ 20 ... + 80
KTO 01140
8MR2 170-1DA
3 pieces
0 ... + 60
KTS 01141
8MR2 170-1BB
3 pieces
– 10 ... + 50
KTS 01141
8MR2 170-1CB
3 pieces
+ 20 ... + 80
KTS 01141
8MR2 170-1DB
3 pieces
+ 20 ... + 80
ZR 011
8MR2 170-1E
2 pieces
Thermostats
NC
NO
Twin thermostat
NC/NO
Mechanical thermostats
CO
+ 10 ... + 60
FZK 011
8MR2 170-1A
2 pieces
– 20 ... + 30
FZK 011
8MR2 170-1B
1 piece
* You can order this quantity or multiples thereof.
Siemens LV 56 · 2008
9/5
9
Air-Conditioning Products
Notes
9
9/6
Siemens LV 56 · 2008
10
Accessories
10/2
Fasteners
10/3
Miscellaneous Parts
Siemens LV 56 · 2008
Accessories
Fasteners
■ Selection and ordering data
Description
Ordering code
UI
01719
Fasteners for mechanical connections
Self-tapping screw DIN 7500 - M6x10
8PQ9500-0BA34
100
Self-tapping screw DIN 7500 - M6x16
8PQ9500-0BA32
100
Self-tapping screw DIN 7500 - M6x20
8PQ9500-0BA31
100
RAL7035 caps for self-tapping screws
8PQ9400-0BA14
100
Self-tapping hex-head screw DIN 7500 - M6x12
8PQ9500-1BA07
100
Description
Ordering code
UI
Carriage bolt DIN 603 - M10x35
8PQ9500-0BA14
50
Carriage bolt DIN 603 - M10x45
8PQ9500-0BA16
50
Carriage bolt DIN 603 - M10x55
8PQ9500-1BA36
50
Carriage bolt DIN 603 - M10x65
8PQ9500-1BA25
50
Busbar connection kit for M10 screw
8PQ9400-0BA02
20
Description
Ordering code
UI
01743
01720
Fasteners for electrical connections, rectangular profiles 1
01742
Fasteners for busbar electrical connections, with H profiles H1
T-head screw - M10x25
8PQ9500-0BA01
100
T-head screw - M10x35
8PQ9500-0BA02
100
Description
Ordering code
UI
Fasteners for electrical connections1
10
Hexagon-head screw ISO 4017 - M8x25
8PQ9500-0BA77
50
Hexagon-head screw ISO 4017 - M8x35
8PQ9500-0BA78
50
Hexagon-head screw ISO 4017 - M12x40
8PQ9500-0BA88
50
Hexagon-head screw ISO 4014 - M12x50
8PQ9500-0BA64
50
Hexagon-head screw ISO 4014 - M12x60
8PQ9500-1BA02
50
Hexagon-head screw ISO 4014 - M12x80
8PQ9500-1BA51
50
Hexagonal nut ISO 4032 - M8
8PQ9500-0BA07
50
Hexagonal nut ISO 4032 - M10
8PQ9500-0BA05
50
Hexagonal nut ISO 4032 - M12
8PQ9500-0BA04
50
Clamping washer DIN 6796 - 8
8PQ9500-0BA58
50
Clamping washer DIN 6796 - 10
8PQ9500-0BA60
50
Clamping washer DIN 6796 - 12
8PQ9500-0BA61
50
Washer DIN 125 - 8.4
8PQ9500-0BA70
50
Washer DIN 125 - 10.5
8PQ9500-0BA67
50
Washer DIN 125 - 13
8PQ9500-1BA33
50
Lock washer BN208012 - 8
8PQ9500-0BA48
50
Lock washer BN208012 - 10
8PQ9500-0BA50
50
Lock washer BN208012 - 12
8PQ9500-0BA51
50
1) For electrical connections make exclusive use of 8.8 strength class fasteners.
10/2
Siemens LV 56 · 2008
Accessories
Miscellaneous Parts
■ Selection and ordering data
Description
Ordering code
UI
“SIVACON SIEMENS” ID plate
8PQ9400-0BA06
1
1/4 turn screws
8PQ9400-0BA17
20
Rotary handle with flat cylinder, hinged on left side
8PQ9400-0BA07
1
Button operated handle, lockable, hinged on left side
8PQ9400-0BA08
1
Semi-cylindrical profile acc. to DIN 18252/18254 8x45°, adjustable, various locks
8PQ9400-0BA26
1
Key with two-way locking mechanism, 3mm
8PQ9400-0BA12
10
Crossbar for installation in cubicle, 400mm wide
Crossbar for installation in cubicle, 600mm wide
Crossbar for installation in cubicle, 800mm wide
Crossbar for installation in cubicle, 1000mm wide
Crossbar for installation in cubicle, 1200mm wide
Crossbar for installation in cubicle, 400mm deep, with side upright or 600mm, 800mm deep
Crossbar for installation in cubicle, 600mm deep (without side upright)
Crossbar for installation in cubicle, 800mm deep (without side upright)
Universal mounting bracket
8PQ3000-0BA12
8PQ3000-0BA71
8PQ3000-0BA72
8PQ3000-0BA84
8PQ3000-0BA85
8PQ3000-0BA10
8PQ3000-1BA24
8PQ3000-1BA25
8PQ9400-0BA01
2
2
2
2
2
2
2
2
10
Cable bracket, C30 profile, cubicle depth 400mm, 600mm, 800mm
Cable bracket, C30 profile, cubicle width 400mm
Cable bracket, C30 profile, cubicle width 600mm
Cable bracket, C30 profile, cubicle width 800mm
Cable bracket, C30 profile, cubicle width 1000mm
Cable bracket, C30 profile, cubicle width 1200mm
Corner piece to fasten cable brackets
8PQ3000-0BA38
8PQ3000-0BA41
8PQ3000-0BA42
8PQ3000-0BA43
8PQ3000-0BA86
8PQ3000-0BA87
8PQ3000-0BA73
5
5
5
5
5
5
10
Double profile DIN rail, 35mm, L = 1600mm
8PQ9600-0BA01
1
Lifting eyebolts
Lifting brackets for 400mm wide cubicle
Lifting brackets for 600mm wide cubicle
Lifting brackets for 800mm wide cubicle
Lifting brackets for 1000mm wide cubicle
Lifting brackets for 1200mm wide cubicle
8PQ9400-0BA11
8PQ3000-0BA88
8PQ3000-1BA00
8PQ3000-1BA01
8PQ3000-1BA02
8PQ3000-1BA03
4
2
2
2
2
2
02120
Column ID plate
00004
02122
02121
01717
02154
Door and special covers
01715
01669
01684
01682
01668
01681
Mechanical accessory parts
Siemens LV 56 · 2008
10/3
10
Accessories
Miscellaneous Parts
■ Selection and ordering data
Description
Ordering code
UI
Electrical accessories
8MF4900
1
Schuko socket max 250 V, with 6,3 A fuse, mounting on 35 mm DIN rail
8MF9300
1
Schuko socket max 250 V, without 16 A fuse, mounting on 35 mm DIN rail
8MF9005
1
Limit switch for single door, 1 NO/NC
8MF4310
1
Limit switch for double door, 1 NO/NC
8MF4311
1
Door grounding strip, 6mm2
8PQ9400-0BA15
10
Cable entry for segregation
8PQ9400-0BA16
20
Bit for Torx screwdriver M6 1/4” 50mm
8PQ9400-0BA05
5
Bit for Torx screwdriver M6 1/4” 200mm
8PQ9400-0BA10
2
Screwdriver with case and charger
8PQ9400-0BA22
1
Spray - RAL 7035
8GF9388-2
1
Spray basic blue-green colour
8PQ9400-0BA04
1
Solid frames for modular devices 12 UM
8GK9910-0KK00
1
Depth adapters for modular devices from 70 to 55mm deep
8GF9670-1
1
Cover for modular devices
5ST3800
1
Instrument plug 72mm x 72mm
8GF7770-4
1
Instrument plug 96mm x 96mm
8GF7770-5
1
Plastic diagram pocket DIN A4
8GD9132
ID stickers, L1, L2, L3, N, PE
8GK9920-0KK27
02155
02127
02126
02125
02124
Lamp with 11 W fluorescent tube, Schuko socket, On/Off switch and magnetic clamp
02156
Tools
Repair paint
Other parts
10
10/4
Siemens LV 56 · 2008
1
10
11
Mechanical Dimensions
11/2
Cubicle
11/3
Base and Enclosure
11/4
Enclosure
11/6
Busbar System
11/8
Terminals
11/9
Mounting Plates
11/10
Covers, modular doors
11/11
SIVACON 8PS Duct Connections
11/15
SENTRON 3VL with Motorised
Operating Mechanism
Siemens LV 56 · 2008
Mechanical Dimensions
Cubicle
■ Structure
01750
W
Width
d
Depth
h
Height
400
400
2000
600
600
800
800
1000
1200
■ Floor anchoring of cubicle without base
d
L2
d
L2
400
350,0
400
250,0
400
350,0
400
310,0
600
550,0
600
450,0
600
550,0
600
510,0
800
750,0
800
650,0
800
750,0
800
710,0
1000
850,0
1000
910,0
1200
1050,0
1200
1110,0
11/2
Siemens LV 56 · 2008
w
L1
01753
01752
11
w
L1
Mechanical Dimensions
Base and Enclosure
01755
01754
■ Base
d
L2
400
350,0
400
250,0
600
550,0
600
450,0
800
750,0
800
650,0
1000
850,0
1200
1050,0
w
L1
■ Door, rear and side panel, with and without design strip
Rear panel
Side panel
without
design strip
01756
01757
Side panel
with
design strip
Door
■ Top plate upgraded to IP X1
11
Side view
01759
01758
Front view
Siemens LV 56 · 2008
11/3
Mechanical Dimensions
Enclosure
01762
■ Top plate with cable entry
01763
11
11/4
Siemens LV 56 · 2008
Mechanical Dimensions
Enclosure
01760
■ Bottom plate with cable entry
01761
11
Siemens LV 56 · 2008
11/5
Mechanical Dimensions
Busbar System
01764
01765
01767
■ Main busbar systems in standard position
01766
■ Busbar systems in free position
■ Grounding bar PE
NSEX_00006
01768
11
11/6
Siemens LV 56 · 2008
Mechanical Dimensions
Busbar System
01771
01772
■ Vertical busbar systems, cascaded
01769
■ Vertical busbar systems, non-cascaded
01770
11
Siemens LV 56 · 2008
11/7
Mechanical Dimensions
Terminals
01783
01784
■ Terminal
■ Busbar arrangement
01749
11
up to 250 A
11/8
Siemens LV 56 · 2008
up to 400 A
up to 630 A
Mechanical Dimensions
Mounting Plates
01781
■ Modular mounting plates, with and without holes
01778
01779
01777
Position
L
A
86,0
B
106,0
C
126,0
D
145,0
E
175,0
F
204,0
G
210,0
H
229,0
I
249,0
K
264,0
L
284,0
w
L
600
253
800
353
w
L
■ Galvanised chrome plate for electrotechnical applications
320
600
520
800
720
1000
920
1200
1120
01774
01773
01775
400
Siemens LV 56 · 2008
11/9
11
Mechanical Dimensions
Covers, Modular Doors
■ Cover
02183
Cover
Interior door or modular door
02129
02128
■ Modular door
11
11/10
Position
L
A
170
B
190
C
210
D
229
E
259
F
288
G
294
H
313
I
333
K
330
L
368
Siemens LV 56 · 2008
Mechanical Dimensions
SIVACON 8PS Duct Connections
02179
02180
■ SIVACON 8PS with connections to top
02182
■ SIVACON 8PS with connections to bottom
02181
11
Siemens LV 56 · 2008
11/11
Mechanical Dimensions
SIVACON 8PS Duct Connections
02161
02160
■ Cut-out in top plate for combination of RX duct with Sentron 3WL Gr I, 3, 4 poles and 3WL Gr. II, 3 poles
■ Cut-out in top plate for combination of LX duct with Sentron 3WL Gr I, 3, 4 poles and 3WL Gr. II, 3 poles
02163
02162
11
11/12
Siemens LV 56 · 2008
Mechanical Dimensions
SIVACON 8PS Duct Connections
02165
02164
■ Cut-out in top plate for combination of DX duct with Sentron 3WL Gr II, 3 and 4 poles
■ Cut-out in top plate for combination of duct LX05..., LX06..., LX07 with Sentron 3WL Gr. II, 3 and 4 poles
02167
02166
11
Siemens LV 56 · 2008
11/13
Mechanical Dimensions
SIVACON 8PS Duct Connections
02169
02168
■ Cut-out in top plate for combination of duct LX08... with Sentron 3WL gr. II, 3 and 4 poles
11
11/14
Siemens LV 56 · 2008
Mechanical Dimensions
SENTRON 3VL with Motorised
Operating Mechanism
02212
■ Dimensions for equipment combination including, circuit breaker, removable or fixed door and motorised operating mechanism
Equipment mounting plate installed in the deepest mounting position. For rear terminal bars, the use of rear vertical partitions is limited.
Dimensions when set to ON * [mm]
Above the cover
A
Above the cubicle
B
Above the inner door
C
VL 160-250
50
-12
-37
VL 400
72
10
-14
VL 630
111
48
23
VL 800
105
43
18
VL 1250/1600
126
62
37
* In sectioning position, the dimensions increase from 27 to 32mm.
Take into account the additional space necessary to pull out the equipment.
11
Siemens LV 56 · 2008
11/15
Mechanical Dimensions
Notes
11
11/16
Siemens LV 56 · 2008
12
Planning
and Configuration
12/2
SIMARIS CFB
12/3
Configuration Procedure
12/4
Check List for SIVACON S4
12/6
Correction Factors
12/8
Internal Temperature of
Low-Voltage Power Distribution
Boards
12/10
Example
Siemens LV 56 · 2008
Planning and Configuration
SIMARIS CFB
■ Overview
With SIMARIS CFB easy planning and programming
SIMARIS CFB facilitates offer processing and project execution
thanks to the following functions:
• Management of project and customer data
• Output functions: list of components, images, SingleLine, bid
documents
• Configuration of SIVACON S4 low-voltage distribution board
with integrated selection of specific equipment and devices
as a function of geographic location
It is always possible to integrate new products, such as Alpha
small distribution boards, at any time
■ Advantages
• Easy to manage Windows interface
• Integrated product database, updated by download
• Rule-based configuration with choice of characteristics not
depending on product
• A detailed knowledge of products and systems is not required
12
• Possibility to make changes with ease at both offer and
construction stage
• Many output functions
• Order placement by e-mail
• Reduced workload
• Price determination/calculation
12/2
Siemens LV 56 · 2008
Planning and Configuration
Configuration Procedure
■ Overview
The planning and configuration of low-voltage power distribution
boards is an important, cost-determining factor within the scope
of power distribution board construction. The following notes are
based on a network calculated with a special procedure. This
chapter is to support the manufacturer of power distribution
boards with the planning and configuration of low-voltage power
distribution boards. Additionally, the manufacturer has to comply
with international standards and regional provisions. The terms
used are explained in the Appendix.
■ Configuration procedure
1. Reading of specification and determination of characteristics
(check list)
- Network system, voltage level
- Transformer power, input currents, short-circuit strength
- Ambient temperature, degree of protection
- Mounting type (single-front / back-to-back / free-standing /
wall)
- Arrangement of power distribution board / installation
surface (operating and maintenance aisles, escape
direction)
- Type of connection (cable or busbar)
- Access to cable, busbar connection (front, rear)
- Cable/busbar entry (top, bottom)
- Ambient conditions (condensation, chemical emissions)
- Device installation systems (fixed, plug-in, withdrawable
design)
- Safety requirements (internal separation, resistance to
internal arcs)
- Date of delivery (tender / order)
- Reserve
2. Configuration of power distribution board (conversion of
characteristics into power distribution board technology)
- Determination of the busbar system
- Arrangement of incoming feeders and couplings
- Determination of feeders
- Feeder-section allocation
3. Optimisation of power distribution boards
- Optimised space utilisation concerning:
• Device selection
• Feeder arrangement
- Cost optimisation concerning:
• Device selection
• Busbar version (reduced cross-section with centre
infeed)
4. Testing of power distribution board configuration
- Determination of the power loss per section
- Determination of the section's internal temperature
- Verification that the section’s internal temperature <= max.
ambient temperature of the applied devices
- Determination of the reduction factors in accordance with
the calculated ambient temperature of the applied devices
- Verification that max. operating current <= rated current x
reduction factor
- If one of the conditions to be verified is not complied with,
the power distribution board configuration has to be
modified concerning
• device selection
• feeder arrangement
and the tests must be repeated..
12
Siemens LV 56 · 2008
12/3
Planning and Configuration
Check List for SIVACON S4
■ Check List for SIVACON S4
Project name: ______________________________________________________________________________________
Customer:
_______________________________________________________________________________________
Planner:
_______________________________________________________________________________________
Date of delivery:__________________
Installation site/height:
_______ m (above MSL)
Ambient temperatue:
_______ °C
Relative air humidity: ______________ %
yer
Condensation risk?
no
Harmful substance:_____________________________________
Mounting type:
single-front back-to-back
Degree of protection to interior:
IP _______________
Degree of protection to cable floor:
IP _______________
Requirements regarding resistence to internal arcs:
yes
wall
free-standing
Internal separation: form _____________
no
which: _______________________
Maximum distribution board dimensions:
W × H × D ______________ mm
Maximum transport dimensions:
W × H × D ______________ mm
Network type:
TN-S
Cross-section PEN/N:
Cross-section PE:
TN-C
Room height: __________ mm
TN-C-S
TT
reduced ________%
full 100%
IEC
acc. to type test
25% of external conductor cross-section
Transformer power:
________________________ kVA
Rated current of infeed:
________________________ A
Frequency:
________________________ Hz
Rated operating voltage:
________________________ V
Rated short-time withstand current Icw (1 sec.)
________________________ kA
12
12/4
Siemens LV 56 · 2008
IT
Planning and Configuration
Check List for SIVACON S4
Infeeds
Connection:
busbar
cable
Access to calbe/busbar entry:
from the front
from the rear
Cable / busbar entry:
top
bottom
fixed-mounted
withdrawable
Intallation system for switching devices:
Air circuit breakers(ACB):
Molded case circuit breakers (MCCB) ≥ 630A: fixed-mounted
withdrawable
Molded case circuit breakers (MCCB) <= 630A: fixed-mounted
withdrawable
plug-in design
fuseless
fused
Switch disconnectors (LBS)
Remarks:
fixed-mounted
__________________________________________________________________________________
__________________________________________________________________________________
Feeders
Connection:
busbar
cable
Access to calbe/busbar entry:
from the front
from the rear
Cable / busbar entry:
top
bottom
fixed-mounted
withdrawable
Intallation system for switching devices:
Air circuit breakers(ACB):
Molded case circuit breakers (MCCB) ≥ 630A: fixed-mounted
withdrawable
Molded case circuit breakers (MCCB) <= 630A: fixed-mounted
withdrawable
plug-in design
fuseless
fused
Switch disconnectors (LBS)
Remarks:
fixed-mounted
__________________________________________________________________________________
__________________________________________________________________________________
Feeder reserve:
_______________ %
Empty space reserve:
_______________ %
Miscellaneous:
__________________________________________________________________________________
__________________________________________________________________________________
Siemens LV 56 · 2008
12/5
12
Planning and Configuration
Correction Factors
■ Rated currents and initial short-circuit AC currents of three-phase distribution transformers with 50 to 3150 KVA
Rated
voltage UcT
400/230, 50 Hz
Rated value of the
short-circuit voltage ukt
525 V, 50 Hz
4% 1)
6% 2)
690/400 V, 50 Hz
4% 1)
6% 2)
4% 1)
6% 2)
Rated power
Rated
current Ir
Initial short-circuit
AC current Ik 3)
Rated
current Ir
Initial short-circuit
AC current Ik 3)
Rated
current Ir
Initial short-circuit
AC current Ik 3)
kVA
A
A
A
A
A
A
A
A
A
50
72
1933
1306
55
1473
995
42
1116
754
100
144
3871
2612
110
2950
1990
84
2235
1508
160
230
6209
4192
176
4731
3194
133
3585
2420
200
288
7749
5239
220
5904
3992
167
4474
3025
250
360
9716
6552
275
7402
4992
209
5609
3783
315
455
12247
8259
346
9331
6292
262
7071
4768
400
578
15506
10492
440
11814
7994
335
8953
6058
500
722
19438
13078
550
14810
9964
418
11223
7581
630
910
24503
16193
693
18669
12338
525
14147
800
1154
–
20992
880
–
15994
670
–
9349
1000
1444
–
26224
1100
–
19980
836
–
15140
1250
1805
–
32791
1375
–
24984
1046
–
18932
1600
2310
–
41857
1760
–
31891
1330
–
24265
2000
2887
–
52511
2200
–
40008
1674
–
30317
2500
3608
–
65547
2749
–
49941
2090
–
37844
3150
4550
–
82656
3470
–
62976
2640
–
47722
12120
1) ukr = 4%, standardised in accordance with DIN 42503 for Srt = 50 ... 630 kVA
2) ukr = 6%, standardised in accordance with DIN 42511 for Srt = 100 ... 1600 kVA
3) Ik Unaffected initial short-circuit AC current of the transformer upon connection to a network with unlimited short-circuit power considering the voltage factor
and the correction factor of the transformer impedance in acc. with DIN EN 60909 I DIN VDE 0102 (July 2002)
■ Correction factors for installation heights over 2000 m above MSL
The low air density at altitudes over 2000 m affects the electrical
characteristics of the power distribution board. The rated
currents are subject to the following correction factors for
installation heights above 2000 m over MSL..
Correction factors for installation heights over 2000 m above MSL
Altitude of
installation site
K1 for the load
up to
2200 m
2400 m
2500 m
2700 m
2900 m
0,88
0,87
0,86
0,85
0,84
up to
3000 m
3300 m
3500 m
0,83
0,82
0,81
up to
4000 m
4500 m
0,78
0,76
up to
5000 m
0,74
In = In <= 2000 m x k1
12
■ Reduced switching capacity for erection heights over 2000 m above MSL
If the boards are erected at altitudes over 2000 m, the devices'
reduced switching capacity must be taken into account. For the
12/6
Siemens LV 56 · 2008
correction factors, refer to the technical documents of the
devices.
Planning and Configuration
Correction Factors
■ Correction factors for busbar systems at ambient temperatures of <> 35 °C
The rated currents for main busbar and distribution busbar
systems indicated in the catalogue refer to the ambient
temperatures for indoor installation described in IEC/EN
60439-1.
Consequently, the ambient temperature for low-voltage power
distribution boards does not exceed +40 °C and the average
value of a period of 24 h is not higher than +35 °C. For ambient
temperatures, whose average value deviates from this ambient
temperature, the following correction factors must be observed.
1,15
1,1
1,05
K2
1
0,95
1
0,9
2
0,85
0,8
15
20
25
30
35
40
45
50
55
Ambient temperature [°C]
(1) Main busbars
(2) Vertical disribution busbars
In = In 35 °C x K2
■ Correction factors for devices
At ambient temperatures of >40 °C, the rated operating current
has to be derated for devices. The ambient temperature of the
devices complies with the internal temperature of the lowvoltage
power distribution boards at the installation site. For the
correction factors, refer to the technical documents of the
devices.
12
Siemens LV 56 · 2008
12/7
Planning and Configuration
Internal Temperature
of Low-Voltage Power Distribution Boards
■ Determination of the internal temperature of low-voltage power distribution boards
With a calculation in accordance with IEC 60890, the internal
temperature of low-voltage power distribution boards can be
specified on the basis of the total power loss and the system
structure.
1. Power loss of busbar systems per section
For the determination of the power loss of main busbars and
distribution busbar systems, the operating current [A] on the
respective length [m] has to be specified. The power loss
assigned to the respective busbar configuration is illustrated in
the following diagram.
Main busbar systems
1000
800
Pv [W/m]
2
600
4
3
1
400
(1) 2x(20x10) mm2
(2) 2x(30x10) mm2
(3) 4x(20x10) mm2
(4) 4x(30x10) mm2
200
0
0
500
1000
1500
2000
2500
I [A]
1200
7
Pv [W/m]
1000
6
8
800
5
600
400
(5) 4x(40x10) mm2
(6) 4x(50x10) mm2
(7) 2x4x(20x10) mm2
(8) 2x4x(30x10) mm2
200
0
0
500
1000 1500 2000 2500 3000 3500 4000
I [A]
Distribution busbar systems
600
500
9
10
Pv [W/m]
11
400
12
300
200
(9) DIN rail 30x30 mm
(10) DIN rail 40x30 mm
(11) 2x(30x10) mm2
(12) 2x(40x10) mm2
100
12
0
0
200
400
600
800
1000
1200
1400
I [A]
PV Main busbar system
= PV [W/m] x Länge [m]
= PV [W/m] x Länge [m]
PV Distribution busbar system
PV Busbar system/section= PV main busbar system+ PV distribution busbar system
12/8
Siemens LV 56 · 2008
Planning and Configuration
Internal Temperature
of Low-Voltage Power Distribution Boards
■ Determination of the internal temperature of low-voltage power distribution boards
2. Power loss of devices per section
4. Determination of the section’s internal temperature
For the power loss, refer to the technical documents of the
devices. In this context, the actual utilisation (operating current,
temporal simultaneousness, rated load factor) has to be
observed.
The diagram below illustrates the correlation between the
installed power loss and the temperature difference, based on
the calculation procedure of IEC 60890 as well as the specific
data of SIVACON S4. The diagram refers to a section in degree
of protection IP55 which is installed side-by-side with a free roof
and rear panel. In case of deviating conditions, the correction
factors of the following table have to be considered.
For terminal bars, cables and lines as well as for small devices,
a percentage increase of 10% has to be considered.
Ir = operating current
In = rated current
PV device = PV devicet x (Ir /
In)2
PV device / section = total (PV device) x 1,1
3. Installed power loss per section
The installed power loss per section is the sum of the power loss
of busbar systems and devices.
PV section = PV busbar system / section+ PV device/section
Ventilated section
Degree of protection <= IP4X
k3
Section with free
side panel
k4
1,65
1,09
Roof not free
Rear panel not free
k5
k6
0,95
0,92
PV section
PV =
k3 x k4 x k5 x k6
40,0
35,0
1
30,0
2
3
4
25,0
5
7
6
dT [K]
PVn device = power loss device at rated current
8
20,0
15,0
10,0
5,0
0,0
0
100
200
300
400
500
Pdiss [W]
Height x width x depth [mm] of the section
(1) 2000x400x600
(2) 2000x400x800
(3) 2000x600x400
(4) 2000x600x600
(5) 2000x600x800
(6) 2000x800x400
(7) 2000x800x600
(8) 2000x800x800
The determined temperature difference refers to the average
height in the section. The temperature linearly increases from the
average section height to the complete section height with
sufficient accuracy and has to be specified for SIVACON S4 with
a correction factor of 1.4.
Internal temperature in average section height [°C] =
Ambient temperature of the power distribution board [°C] +
temperature difference dT [K]
Internal temperature in complete section height [°C] =
Ambient temperature of power distribution board [°C] +
Temperature difference dT [K] x 1.4
Siemens LV 56 · 2008
12/9
12
Planning and Configuration
Example
■ Example for a power distribution board configuration test
Power distribution board data
Determination of the power loss per section
Rated operating voltage Ue
Rated short-time current Icw
Rated load factor
Degree of protection
Ambient temperature
Section height
Base height
Section depth
Cable connection infeed
Cable connections outputs
400V / 50Hz
35kA
0.8
IP40
35 °C
2000mm
100mm
600mm
from the top
rear bottom
(rear panel free)
PV section 1 = (PV busbar system section 1 + PV device section 1) x 1,1 =
743,81 W
PV section 2 = (PV busbar system section 2 + PV device section 2) x 1,1 =
354,82 W
Determination of the internal temperature
Factors section 1
k3 1.65
k4 1.09
k5 0.85
k6 1
Front view
Factors section 2
k3 1.65
k4 1.09
k5 1
k6 1
PV section 1 =
PV section 2 =
486.56 W
197.29 W
Internal temperature in acc. with diagram page
12/9
Temperature difference in half section height section 1
Temperature difference in half section height section 2
22 K
12 K
Internal temperature in half section height for section 1
Internal temperature in half section height for section 2
57 °C
47 °C
Internal temperature in section height for section 1
Internal temperature in section height for section 2
66 °C
52 °C
Configuration test
According to the technical documents of the devices, the limit
temperatures are not exceeded.
01625
The devices are able to carry the specified rated currents.
Determination of the power loss of the busbar systems per section
In × 0,8 [A]
Section 1
Lenght [m]
PV busbar system
[W/m]
PV busbar system
[W]
200
0,45
8
520
0,2
50
10
904
0,3
160
48
704
0,25
100
25
PV busbar section 1 =
3,6
86,6 W
Determination of devices power lass per section
12
Section 1
Section 2
Location
In [A]
In x 0,8 [A]
PV device max [W]
PV device [W]
Infeed
01.D1
1424
–
825
495.06
Output
01.J1
250
200
80
51.20
Output
01.K1
250
200
80
51.20
Output
02.D1
250
200
80
51.20
Output
02.F1
400
320
170
108.80
Output
02.K2
630
504
254
162.56
PV device section 1 =
597.46 W x 1.1 = 657.21 W
PV device section 2 =
322.56 W x 1.1 = 354.82 W
12/10
Siemens LV 56 · 2008
13
Appendix
13/2
Glossary
13/8
Order Information
13/10
Standards and Approvals
13/11
Quality Management
13/12
Online Services
13/13
Customer Support
13/14
Training
13/15
Subject Index
13/16
Conditions of Sale and
Delivery, Export Regulations
Siemens LV 56 · 2008
Appendix
Glossary
■ Rated values/definitions
The terms defined below are used in the present catalogue in
accordance with IEC 60439-1 and EN 60439-1.
Section panel
IEC/EN 60439-1; 2.2.2
Low-voltage switchgear and controlgear assembly
IEC/EN 60439-1; 2.1.1
Component of a switchgear and controlgear assembly positioned
between two superimposed horizontal limiting levels inside a
section.
Assembly of one or more switching devices combined with
corresponding operating equipment for control, measuring and
signalling tasks and with protective and control devices, etc. The
individual devices are completely assembled by the manufacturer,
including all internal electrical and mechanical connections and
construction components.
Type-tested low-voltage switchgear and controlgear assembly
(TTA)
IEC/EN 60439-1; 2.1.1.1
Low-voltage switchgear and controlgear assembly which complies
with the original type or system of the switchgear and controlgear
assembly type-tested in accordance with this standard without
significant deviations.
Functional unit
IEC/EN 60439-1; 2.1.5
Part of a switchgear and controlgear assembly with all electrical and
mechanical components which contribute to the execution of the
same function.
Cubicle
IEC/EN 60439-1; 2.4.1
Component of a switchgear and controlgear assembly which serves
the accommodation of various components of a switchgear and
controlgear assembly or of an enclosure.
Section
IEC/EN 60439-1; 2.2.1
Compartment
IEC/EN 60439-1; 2.2.3
Section or section panel which is encased with the exception of
openings required for connection, control or ventilation.
Transport unit
IEC/EN 60439-1; 2.2.4
Part of a switchgear and controlgear assembly or complete switchgear
and controlgear assembly which is not disassembled for transportation.
Rated diversity factor
IEC/EN 60439-1; 4.7
The rated diversity factor of a switchgear and controlgear assembly
or of a component of a switchgear and controlgear assembly (e.g.
section, section panel) which comprises several main circuits is the
ratio of the largest sum of all currents which are to be expected in the
respective main circuits at any given time to the sum of the rated
currents of all main circuits of the switchgear and controlgear
assembly or of the affected part of the switchgear and controlgear
assembly. If the manufacturer states a rated diversity factor, this
value must be taken as a basis for the temperature-rise test.
Number of main current circuits
Rated diversity factor
2 and 3
4 and 5
6 up to and including 9
10 uand more
0.9
0.8
0.7
0.6
Component of a switchgear and controlgear assembly positioned
between two successive vertical limiting levels.
Rated values
In accordance with IEC/EN 60439-1;4, the manufacturers of lowvoltage
switchgear and controlgear assemblies state rated values. These rated
values apply to the specified operating conditions and characterise the
usability of switchgear and controlgear assemblies. The coordination of
the operating equipment or the configuration of the switchgear and
controlgear assemblies must be based on these rated values.
Rated short-time withstand current (Icw)
IEC/EN 60439-1; 4.3
As the effective short-circuit current value, the rated short-time
withstand current characterises the thermal strength of switchgear
and controlgear assembly circuits during a short-time load. The
rated short-time withstand current is normally determined for the
duration of 1 sec; deviating time values must be indicated. The rated
short-time withstand current is stated for the distribution and/or main
busbars of switchgear and controlgear assemblies.
Rated peak withstand current (Ipk)
IEC/EN 60439-1; 4.4
13
As peak value of the peak current, the rated peak withstand current
characterises the dynamic strength of switchgear and controlgear
assembly circuits. The rated peak withstand current is stated for the
distribution and/or main busbars of switchgear and controlgear
assemblies.
13/2
Siemens LV 56 · 2008
Rated conditional short-circuit current (Icc)
IEC/EN 60439-1; 4.5
The rated conditional short-circuit current corresponds to the
uninfluenced short-circuit current which a circuit of the switchgear
and controlgear assembly, that is protected by short-circuit
protective devices, may carry without damage (for a limited time).
The rated conditional short-circuit current is therefore stated for
outgoing and/or incoming feeders, e.g. with circuit breakers.
Rated impulse withstand voltage (Uimp)
IEC/EN 60947-1; 4.3.1.3
Parameter for the resistance of clearances inside switching devices
to impulse overvoltages. The application of suitable switching
devices prevents disconnected system parts from transmitting
overvoltages from the network in which they are applied.
Appendix
Glossary
Rated current (In) (of circuit breakers)
IEC/EN 60947-2; 4.3.2.3
Rated continuous current (Iu)
IEC/EN 60947-1; 4.3.2.4
Current which, for circuit breakers, corresponds to the rated
continuous current and the conventional thermal current.
➔ Rated continuous current
Current which can be carried by switching devices in continuous
operation (for weeks, months or years).
Rated control voltage (Uc)
IEC/EN 60947-1; 4.5.1
Rated making capacity
IEC/EN 60947-1; 4.3.5.2
Voltage applied to the actuating NO contact of a control circuit. It
may deviate from the rated control supply voltage if transformers or
resistors are connected to the control circuit.
Current which can be switched on by switching devices with the
respective rated operating voltage in accordance with the utilisation
category.
➔ Rated operating voltage
Rated ultimate short-circuit breaking capacity (Icu)
IEC/EN 60947-2; 4.3.5.2.1
Rated frequency
IEC/EN 60947-2; 4.3.3
Maximum short-circuit current which can be interrupted by a circuit
breaker (test O – CO). After a short-circuit switch-off, the circuit
breaker is able to trip with increased tolerances in the case of
overload.
Frequency for which switching devices are dimensioned and to
which the other characteristic data refer.
➔ Rated operating voltage, rated continuous current
Rated service short-circuit breaking capacity (Ics)
IEC/EN 60947-2; 4.3.5.2.2
The short-circuit current depending on the rated operating voltage
which can be repeatedly interrupted by a circuit breaker (test O –
CO – CO). After the short-circuit breaking, the circuit breaker is able
to continue to carry the rated current in the case of increased
selfheating and to trip in case of overload.
➔ Rated continuous current
➔ Rated operating voltage
Rated insulation voltage (Ui)
IEC/EN 60947-1; 4.3.1.2
Voltage to which the insulation tests and creepage distances refer.
The maximum rated operating voltage must, in no case, exceed the
rated insulation voltage.
➔ Rated operating voltage
Rated short-circuit breaking capacity (Icn)
IEC/EN 60947-1; 4.3.6.3
Rated operating capacity
IEC/EN 60947-1; 4.3.2.3
Maximum current which can be switched off by switching devices
with the rated operating voltage and frequency without causing
damage. The value is stated as effective value.
➔ Rated operating voltage
Capacity which can be switched by switching devices with the
assigned rated operating voltage in accordance with the utilisation
category, e.g. power contactor of utilisation category AC-3: 37 kW at
400 V.
Rated short-circuit breaking capacity (Icm)
IEC/EN 60947-1; 4.3.6.2
Rated operating voltage (Ue)
IEC/EN 60947-1; 4.3.1.1
Voltage to which the characteristic values of switching devices are
referred to. The maximum rated operating voltage must, in no case,
exceed the rated insulation voltage.
➔ Rated insulation voltage
Maximum current which can be switched on by switching devices
with a certain rated operating voltage and frequency without
causing damage. Deviating from the other characteristic data, the
value is stated as peak value.
➔ Rated operating voltage
Rated operating current (Ie)
IEC/EN 60947-1; 4.3.2.3
Current which can be carried by switching devices in consideration
of the rated operating voltage, the operating time, the utilisation
category and the ambient temperature.
➔ Rated operating voltage
13
Siemens LV 56 · 2008
13/3
Appendix
Glossary
■ Ambient conditions / Degrees of protection
The climate and external ambient conditions (natural impurities,
toxic chemically active substances, small animals) may have severe
repercussions on the functionality of electrical systems.
The effect depends on the climatic protection of the room in which
the system is installed.
In the presence of high concentrations of toxic substances it is
advisable to adopt appropriate measures to reduce them, for
example:
– Intake of air from an area with a lower pollution level
– Exposing the area to a mild overpressure (e.g., introducing non
polluted air into the system)
– Climate control of the room where the system is installed
(reducing the temperature, relative humidity of the air < 60%,
possible installation of a purifying filter)
– Attenuation of overheating (overdimensioning of electrical
equipment and components such as main busbars and
distribution busbars)
Ambient conditions
Class
Classification of ambient conditions with the relative limit values
(defined according to standard IEC 60721-3-3)
Measurements
Climatic
3K4
Minimum temperature of the air
Maximum temperature of the air
–
Minimum relative humidity of the air
Maximum relative humidity of the air
Minimum absolute humidity of the air
Maximum absolute humidity of the air
Temperature variation rate
Minimum air pressure
Maximum air pressure
Solar radiation
Thermal radiation
Movement of the air
Condensate formation
Matter deposited by the wind
Water (other than rain)
Ice accumulation
Other ambient climatic
conditions
Biological
3Z1
Thermal radiation is negligible
3Z7
3Z9
3Z10
Water drops as defined in standard IEC 60068-2-18
Water spray as defined in standard IEC 60068-2-18
Water jets as defined in standard IEC 60068-2-18
3B2
– 5 °C 1)
+ 40 °C
+ 35 °C (24h-Mittel) 2)
5%
95 %
1 g/m_
29 g/m_
0,5 °C/min
70 kPA
106 kPA
700 W/m2
–
1,0 m/s
possible
Provide heating,
if frequent 1 per day
for 2 hours
No
See other ambient climatic
conditions
No
IPX1
IPX4
IPX5
Flora
Mold formation
Fauna
Presence of rodents and other
harmful animals, other than
termites
IP4X, including protection for technical floors
Chemically active
substances
3C3
Marine salt
Sulphurous anhydride SO2
Hydrogen sulphide H2S
Chlorine Cl2
Hydrogen chloride HCl
Hydrofluoric acid HF
Ammonia NH3
Ozone O3
Nitrogen oxide NOx
Salt mist ≤ 2 mg/dm2
5,0 mg/m3 (2 ppm)
3,0 mg/m3 (2 ppm)
0,3 mg/m3 (0,1 ppm)
1,0 mg/m3 (0,7 ppm)
0,1 mg/m3 (0,06 ppm)
10,0 mg/m3 (14,3 ppm)
0,1 mg/m3 (0,05 ppm)
3,0 mg/m3 (1,66 ppm)
Mechanically active
substances
3S1
Sand in the air
Dust (matter in suspension)
Dust (matter deposited)
–
0,01 mg/m3
0,4 mg/(m2 * h)
< IP5X
3S3
Sand in the air
Dust (matter in suspension)
Dust (matter deposited)
300 mg/m3
0,4 mg/m3
15 mg/(m2 * h)
≥ IP5X
1) According to standard IEC60721-3-3 the minimum admissible air temperature is + 5° C
2) Higher values can be admitted on request (see dimensioning tables)
13
13/4
Siemens LV 56 · 2008
Appendix
Glossary
■ Network systems
Distribution systems (network types) in acc. with IEC 60364-3
(DIN VDE 0100-300)
Determination of protective measures and selection of the electrical
operating equipment according to the distribution system.
L1
TN systems
L2
TN-S system
The neutral conductor and protective conductor
function are consistently separated in this system.
L3
N
PE
1
L1
TN-C system
The neutral conductor and protective conductor
function are composite throughout the entire
system.
L2
L3
PEN
1
L1
TN-C-S system
Combination of the neutral and the protective
conductor function. In one part of the system, they
are composite in one conductor, while they are
separated in another part.
L2
L3
PEN
PE
N
13
1
1 Body
Siemens LV 56 · 2008
13/5
Appendix
Glossary
■ Network systems
Distribution systems (network types) in acc. with IEC 60364-3
(DIN VDE 0100-300)
Determination of protective measures and selection of the electrical
operating equipment according to the distribution system.
L1
TT system
In the TT system, one point is directly earthed; the
elements of the electrical system are connected to
earth electrodes which are separated from the signal
earth. The TT system corresponds to the system in
which today the protective measures protective
earthing, RCCB and fault-voltage circuit breaker are
applied.
L2
L3
N
PE
1
L1
IT system
The IT system features no direct connection between
active conductors and earthed parts; the elements of
the electrical system are earthed. The IT system
corresponds to the system in which today the
protective conductor system protective measure is
applied.
L2
L3
2
PE
1
1 Body
2 Impedance
First letter = Earthing condition of the
supplying current source
Second letter = Earthing condition of the
elements of the electrical system
Further letters = Arrangement of the neutral
and the protective conductor
T = Direct earthing of one point
I = Either insulation of all active parts of the
earth or connection of one point to the
earth via impedance
T = Elements are directly earthed,
irrespective of a possible earthing of
one point of the current supply
N = Elements are directly connected to the
signal earth; in AC current networks, the
earthed point is generally the star point
S = Neutral and protective conductor
function by means of separated
conductors
C = Neutral and protective conductor
function combined in one conductor
(PEN)
13
13/6
Siemens LV 56 · 2008
Appendix
Glossary
■ Operating and maintenance aisles
2000
1)
(in acc. with DIN VDE 0100 Part 729)
500
700
600
700
700
700
1) Minimum passage height beneath covers or casings.
■ Minimum passage height beneath covers or casings.
Minimum aisle width
700 or 600 mm
Escape direction
Free minimum
clearance 500 mm 1)
2)
1) With opposing power distribution board fronts, constriction by open doors (i.e. doors which do not close towards the escape direction) is only accounted
for on one side.
2) Door widths must be observed, i.e. a minimum door opening angle of 90°.
13
Siemens LV 56 · 2008
13/7
Appendix
Order Information
■ Logistics
General
Packaging, packing units
Our logistics service offers “quality from the order to the
delivery” pertaining to delivery service, communication and
environmental protection. To maintain this high quality, we focus
on the optimisation of the logistical procedures on the basis of a
customised infrastructure and automatic DP order processing.
Our device and shipping packagings offer protection against
dust and mechanical damage during transport, thus ensuring
that the customer receives the devices in a flawless condition.
When selecting and designing our packagings, we set great
value upon environmental compatibility, re-usability (e. g.
crumpled paper instead of styrofoam chips as transport
protection in shipping packages up to 32 kg) and above all,
upon waste prevention.
We attach major importance to personal support, deliveries in
due time and area-wide transportation.
The DIN-ISO-9001 certification and a consistent quality
management are vital issues for us.
The automatic DP order processing is fast, cost-effective and
fail-safe. If you would like to exploit these benefits, please do not
hesitate to contact us.
13
13/8
Siemens LV 56 · 2008
Unless otherwise stated in the selection and ordering data of this
catalogue, our devices are supplied in separate individual
packages.
The device order numbers can be easily identified by means of
the EAN bar code, which simplifies both order and warehouse
logistics. The low-voltage controls and distribution master data
include the allocation of order numbers and EAN code for data
processing.
Appendix
Order Information
■ Ag and Cu surcharges
Surcharges for copper (Cu) and silver (Ag) will be added to the
prices of certain products. The amount of the surcharge
depends on the percentage taken from the current list price.
Calculation of the surcharges is governed by the official Ag
quotation for refined silver and the applicable Cu-DEL quotation
on the date of receipt of order or of call-off.
■ Small orders
When small orders are placed, the costs associated with order
processing are greater than the order value. We recommend
therefore that you combine several small orders. Where this is
not possible, we unfortunately find it necessary to charge a
processing supplement of € 20.-- to cover our costs for order
processing and invoicing for all orders with a net goods value of
less than € 250.--.
The prices for products include the price of copper calculated
on the basis of a list price of € 150/100 kg.
■ Orders for special designs
For ordering products that differ from the versions listed in the
catalog, the order number specified in the catalog must be
supplemented with “–Z”; the required features must be
specified by means of the alphanumeric order codes or in plain
text.
13
Siemens LV 56 · 2008
13/9
Appendix
Standards and Approvals
■ CE mark of conformity
Manufacturers of products which fall within the subject area to
which EU directives apply must identify their products,
instruction manuals or packaging with a CE mark of conformity.
The CE mark of conformity confirms that a product fulfills the
appropriate basic requirements of all pertinent directives. The
mark of conformity is a mandatory requirement for putting
products into circulation throughout the EU.
All the products in this catalog are in conformance with the EU
directives and bear the CE mark of conformity.
• Low-voltage directive (NS 73/23/EU)
• EMC directive (EMC 89/336/EU)
The manufacturer of the system assembled from individual
modules is responsible for the preparation of the EC declaration
of conformity.
■ ALPHA/LOVAG
The Low-Voltage Controls and Distribution Division of Siemens
AG is a member of the "Gesellschaft zur Prüfung und
Zertifizierung von Niederspannungsgeräten e.V. ALPHA"
(Society for Testing and Certification of Low-Voltage Equipment),
Frankfurt am Main.
The responsibility of manufacturers and the high quality of
products are promoted by ALPHA by means of supportive
procedural guidelines for testing equipment according to the
currently valid standards.
Providing specific conditions are fulfilled, ALPHA can also issue
officially recognized product certificates if required. As a
member of LOVAG, ALPHA is also working towards obtaining
international recognition for declarations of conformity and
certificates.
LOVAG (Low-Voltage Agreement Group) is a body comprising
international specialists from certification bodies and industry
who are working together to create a standardized European
certificate.
13
13/10
Siemens LV 56 · 2008
List of LOVAG members
ALPHA
ASEFA
ACAE
CEBEC
Intertek Semko AB
APPLUSS
Germany
France
Italy
Belgium
Sweden
Spain
Appendix
Quality Management
■ Quality management
The quality management system of our A&D division complies
with the international standard EN ISO 9001.
The products and systems described in this catalog are sold
under application of a quality management system certified by
DQS and TÜV Management Service GmbH in accordance with
ISO 9001. The certificates are recognized in all IQ Net countries.
DQS Registered Certificate Nos.:
Siemens AG
Automation and Drives
• Industrial Automation Systems
Reg. No.: 001323 QM
• Industrial Communication SIMATIC NET
Reg. No.: 002613 QM.
TÜV (German Technical Inspectorate)
Registered Certificate No.:
Siemens AG
Automation and Drives
• Low-Voltage Controls
Reg. No.: 12 100 16950 TMS.
BVQI Registered Certificate No.:
Siemens AG
Automation and Drives
• Electrical Installation Technology
Reg. No.: 117779
13
Siemens LV 56 · 2008
13/11
Appendix
Online-Services
■ A&D in the WWW
A detailed knowledge of the range of products and services
available is essential when planning and configuring automation
systems. It goes without saying that this information must always
be fully up-to-date.
The Siemens Automation and Drives Group (A&D) has therefore
built up a comprehensive range of information in the World Wide
Web, which offers quick and easy access to all data required.
Under the address
http://www.siemens.com/automation
you will find everything you need to know about products, systems and services.
■ Product selection using the Offline Mall of Automation and Drives
Detailed information together with convenient interactive functions:
The Offline Mall CA 01 covers more than 80,000 products and
thus provides a full summary of the Siemens Automation and
Drives product base.
Here you will find everything that you need to solve tasks in the
fields of automation, switchgear, installation and drives. All information is linked into a user interface which is easy to work with
and intuitive.
After selecting the product of your choice you can order at the
press of a button, by fax or by online link.
Information on the interactive catalog CA 01 can be found on the
Internet under
http://www.siemens.com/automation/ca01
or on CD-ROM and DVD..
■ Easy shopping with the A&D Mall
The A&D Mall is the virtual department store of Siemens AG in
the Internet. Here you have access to a huge range of products
presented in electronic catalogs in an informative and attractive
way.
Data transfer via EDIFACT allows the whole procedure from selection through ordering to tracking of the order to be carried out
online via the Internet.
Numerous functions are available to support you.
For example, powerful search functions make it easy to find the
required products, which can be immediately checked for availability. Customer-specific discounts and preparation of quotes
can be carried out online as well as order tracking and tracing.
Please visit the A&D Mall on the Internet under:
http://www.siemens.com/automation/mall
13
13/12
Siemens LV 56 · 2008
Appendix
Customer Support
■ Configuration and software engineering
Support in configuring and developing with customeroriented
services from actual configuration to implementation of the automation project.2)
■ Technical support
.I
Competent consulting in technical questions covering a wide
range of customer-oriented services for all our products and systems.
In the face of harsh competition you need optimum conditions to
keep ahead all the time:
A strong starting position. A sophisticated strategy and team for
the necessary support - in every phase.
Service & Support from Siemens provides this support with a
complete range of different services for automation and drives.
Tel.: +49 (0) 180 50 50 222
Fax: +49 (0) 180 50 50 223
In every phase: from planning and startup to maintenance and
upgrading.
http://www.siemens.com/
automation/support-request
Our specialists know when and where to act to keep the productivity and cost-effectiveness of your system running in top form.
■ Service on site
■ Online support
With service on site we offer services for startup and maintenance, essential for ensuring
system availability.
The comprehensive information
system available round the
clock via Internet ranging from
Product Support and Service &
Support services to Support
Tools in the Shop.
http://www.siemens.com/
automation/service&support
■ Technical consulting
Tel.: +49 (0) 180 50 50 444 2)
■ Repairs and spare parts
Support in the planning and designing of your project from detailed actual-state analysis,
target definition and consulting
on product and system questions right to the creation of the
automation solution.2)
Technical assistance
Expert technical assistance1)
for Low-voltage controls and
electrical installation.
Tel.: +49 (0) 9 11 8 95-59 00
Fax: +49 (0) 9 11 8 95-59 07
In the operating phase of a machine or automation system we
provide a comprehensive repair
and spare parts service ensuring the highest degree of operating safety and reliability.
Tel.: +49 (0) 180 50 50 446 2)
■ Optimization and upgrading
To enhance productivity and
save costs in your project we offer high-quality services in optimization and upgrading.2)
E-Mail: technical-assistance
@siemens.com
1) Contact:
Technical assistance for product selection · Old/new coding ·
Competitor coding · Special versions · Special requirements · Sales
promotion (Infoline).
Your regional contacts for sales support (prices, discounts, delivery times).
Technical Support for commissioning support and after-sales service.
2) For country-specific telephone numbers go to our Internet site at:
http://www.siemens.com/automation/service&support
13
Siemens LV 56 · 2008
13/13
Appendix
Training
■ Training is decisive for your success
SITRAIN®
- the Siemens Training for Automation and Industrial
Solutions - provides you with comprehensive support when solving your tasks.
Training by the market leader in automation, plant installation
and support permits you to make your decisions with certainty
and full command. Especially where the optimum and efficient
use of products and plants are concerned. You can eliminate
deficiencies in existing plants, and exclude expensive faulty
planning right from the beginning.
All in all, this represents an enormous gain for your company: shortened startup times, optimized plant components,
faster troubleshooting, reduced down times. In other words,
increased profits and lower costs.
■ The right mixture: Blended Learning
Blended learning is understood to be the combination of various
training media and sequences. For example, a local attendance
course in a Training Center can be optimally supplemented by a
teach-yourself program as preparation or follow-up. Furthermore, SITRAIN utilizes supported online training for live instruction on the Internet at agreed times.
The right mixture is the solution. Therefore blended learning
can convey complex topics well, and train networked thinking. Additional effect: reduced travelling costs and periods
of absence through training sequences independent of location and time.
■ The international training portal
http://www.siemens.com/sitrain
All training facilities at a glance: search in the worldwide range
of courses at leisure, call up all course dates online, utilize the
daily updated display of vacant course spaces - and register directly.
■ Customer comments on Sitrain
" ... the good course documents, competence and flexibility convinced me.”
[Manfred Riek from Festo Systemtechnik, responsible for planning the basic and further training of project engineers]
" ... represents effective training, constructive dialogs, and solutions which provide great help."
[Günter Niedermaier, electrical design manager at AMT, Aalen]
■ Contact
Visit us on the Internet at:
http://www.siemens.com/sitrain
or let us advise you personally. You can request our latest training catalog from:
Top trainers
Our trainers know their topics in practice, and possess comprehensive didactic experience. Course developers have a direct
wire to product development, and directly pass on their knowledge to the trainers.
Practical experience
The practical experience of our trainers makes it possible for
them to pass on theoretical matter in a plausible manner. But
since it is known that all theory is drab, we attach great importance to practical exercises which can comprise up to half of the
course time. You can therefore immediately implement your new
knowledge in practice. We train you on state-of-the-art methodically/didactically designed training equipment. You feel absolutely certain when trained in this manner.
Wide variety
With a total of approx. 300 local attendance courses, we train the
complete range of A&D products and a large portion of the system solutions from I&S. Telecourses, teach-yourself software
and seminars presented on the Web supplement our classical
range of courses.
Close to our customers
13
The distance is short. You can find us approx. 60 times in Germany, and worldwide in 62 countries. You wish to have individual
training instead of one of our 300 courses? No problem: we will
provide a program tailored exactly to your personal requirements. Training can be carried out in our Training Centers or at
your company.
13/14
Siemens LV 56 · 2008
Course office, Infoline Germany:
Tel.: +49 (0)1805 / 23 56 11 (0.12 €/Min)
Fax: +49 (0)1805 / 23 56 12
Appendix
Subject Index
13
Siemens LV 56 · 2008
13/15
Appendix
Terms and conditions of sale and delivery
Export regulations
■ Terms and conditions of sale and delivery
By using this catalog you can acquire hardware and software
products described therein from Siemens AG subject to the following terms. Please note! The scope, the quality and the conditions for supplies and services, including software products,
by any Siemens entity having a registered office outside of Germany, shall be subject exclusively to the General Terms and
Conditions of the respective Siemens entity. The following terms
apply exclusively for orders placed with Siemens AG.
For customers with a seat or registered office in Germany
The “General Terms of Payment” as well as the “General Conditions for the Supply of Products and Services of the Electrical
and Electronics Industry” shall apply.
For software products, the “General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office in Germany” shall apply.
For customers with a seat or registered office outside
of Germany
The “General Terms of Payment” as well as the “General Conditions for Supplies of Siemens, Automation and Drives for Customers with a Seat or registered Office outside of Germany” shall
apply.
For software products, the “General License Conditions for Software Products for Automation and Drives for Customers with a
Seat or registered Office outside of Germany” shall apply.
General
The dimensions are in mm. In Germany, according to the German law on units in measuring technology, data in inches only
apply to devices for export.
Illustrations are not binding.
Insofar as there are no remarks on the corresponding pages, especially with regard to data, dimensions and weights given these are subject to change without prior notice.
The prices are in € (Euro) ex works, exclusive packaging.
The sales tax (value added tax) is not included in the prices. It
shall be debited separately at the respective rate according to
the applicable legal regulations.
Prices are subject to change without prior notice. We will debit
the prices valid at the time of delivery.
Surcharges will be added to the prices of products that contain
silver, copper, aluminum, lead and/or gold if the respective basic
official prices for these metals are exceeded. These surcharges
will be determined based on the official price and the metal factor of the respective product.
The surcharge will be calculated on the basis of the official price
on the day prior to receipt of the order or prior to the release order.
The metal factor determines the official price as of which the metal surcharges are charged and the calculation method used.
The metal factor, provided it is relevant, is included with the price
information of the respective products.
13
13/16
Siemens LV 56 · 2008
An exact explanation of the metal factor and the text of the Comprehensive Terms and Conditions of Sale and Delivery are available free of charge from your local Siemens business office under the following Order Nos.:
• 6ZB5310-0KR30-0BA1
(for customers based in Germany)
• 6ZB5310-0KS53-0BA1
(for customers based outside Germany)
or download them from the Internet
http://www.siemens.com/automation/mall
(Germany: A&D Mall Online-Help System)
■ Export regulations
The products listed in this catalog / price list may be subject to
European / German and/or US export regulations.
Therefore, any export requiring a license is subject to approval
by the competent authorities.
According to current provisions, the following export regulations
must be observed with respect to the products featured in this
catalog / price list:
AL
Number of the German Export List
Products marked other than “N” require an
export license.
In the case of software products, the export designations of the relevant data medium must also
be generally adhered to.
Goods labeled with an “AL“ not equal to “N” are
subject to a European or German export authorization when being exported out of the EU.
ECCN
Export Control Classification Number
Products marked other than “N” are subject to a
reexport license to specific countries.
In the case of software products, the export designations of the relevant data medium must also
be generally adhered to.
Goods labeled with an “ECCN“ not equal to “N”
are subject to a US re-export authorization.
Even without a label or with an “AL: N” or “ECCN: N”, authorization may be required due to the final destination and purpose for
which the goods are to be used.
The deciding factors are the AL or ECCN export authorization indicated on order confirmations, delivery notes and invoices.
Errors excepted and subject to change without prior notice.
A&D/VuL_ohne MZ/En 05.09.06