ET
E
SH
ET
E
SH
CH
CH
TECHNICAL
SHEET
E
E
T
T
CH
E
T
ET
E
SH
CH
E
877.785.1897
T
ET
E
SH
Multitron World Edition Coin Acceptor
CH
E
T
ET
E
SH
CH
E
T
ET
E
SH
ET
E
SH
CH Any
E
24V Timer
T
Red/Yellow
Optional*
CH
E
T
ET
E
SH
CH
E
T
ETYellow
E
SH Red/Green
Black
00:00
5
4
3
2
1
A
Red/Green
CH
E
T
ET
E
SH
COIN COUNT
AUX COUNT
RESET/CANCEL
TIME PER COIN
COINS TO START
COINS PER AUX
LOW TIME ALARM
QUICK RESTART TIME
CH
E
T
ET
E
SH
CH
E
T
MODE
ET
E
SH
INCREASE DECREASE
(RESET) (CANCEL)
(GS-401 Sold Separately)
CH
TE
ET Wire Color
E
Red/Green
SH
FunctionET
ET
E
E
H relay common (see note below)
Solid
Sstate
SH
H VAC hot (recommended supply
C24
CHvoltage of 22-30 VAC)
TE
TE
Black
EC
T
Yellow
24 VAC common (recommended supply voltage of 22-30 VAC)
Red/Yellow
Solid state relay common (see note below)
Note: Outputs for all coins are sent via the Red/Green and Red/Yellow wires.
H
ET
E
SH
*The Red/Yellow wire is a solid state output to be used with any auxiliary product (i.e. digital counter, coin vacuum system, etc.)
ET
ET
C
TE
C
TE
Programming Instructions
for Tokens or Non-Domestic Coins - Channels 1 - 5
1.
2.
3.
4.
5.
Power down the Multitron GS-44WE coin acceptor.
Switch "on" the six (6) dip switches located on the side coin acceptor.
Power up the coin acceptor.
Insert 2 of the coin to be programmed.
Turn off all dip switches (except the one that equals the value of your
coin.) See Table A.
Insert 15 more of the coin to be programmed.
Turn "off" the switch left on in Step 5.
Power down for a minimum of 5 seconds then power up.
Repeat above steps to program additional coins.
ET
E
H
6. S
7.
CH
TE 8.
9.
Programming Instructions
for Tokens or Non-Domestic Coins - Channel 6
1.
2.
3.
4.
5.
ET
E
SH
With machine off, put the 6 dip switches to ON.
Energize and insert 15 coins / tokens.
Wait for the double “clack” of programming end.
Put dip switches to OFF.
Switch off the validator, then switch it on again..
CH
E
T
CH
E
T
ET
E
SH
*If a value other than the preset amount is needed, a handheld
programmer is required. Part Number: 1102800
ET
3611
3 Mile Road NW
HE
CH
TE
S
ET
E
E
PLEASE
FOR THEH
DOMESTIC
CURRENCY
HPRE-PROGRAMMED
HE NOTE: EACH UNIT SHIPS
S
S
S
SPECIFIED
WHEN
ORDERED.
H
H
H
CH
TE
CH
TE
S
Dip Switch Pulses
1 = 1
2 = 4
3 = 5
4 = 6
5 = 7
6 = 8
Table A
ET
E
SH
CH
TE
ET
E
SH
Specifications:
• Accepts 30+ different coins
• Accepts coin size 0.64 - 1.26" diameter (16 mm - 31.5 mm)
• No permanent sample coin required
• 24 VAC and 24 DC compatible
• Adjustable output pulse (with programmer)
• Program with or without external programmer
• Power loss will not affect memory
• Corrosion proof chassis
• 2" mounting footprint
• 2 year warranty
CH
E
T
ET
E
SH
CH
E
T
ET
ET
Grand
HERapids, MI 49534
CH
E
T
C
TE
ET
E
SH
CH
TE
www.GinSan.com
HE
S
CH
TE
ET
E
SH
ET
E
H
S
T/G-504 9/11