MAPPS CSA Class I DIV II Solar Power Systems for Hazardous Locations Design and Pricing Guide 1. CALCULATE YOUR POWER REQUIREMENTS Figure your load in Watt-hours per day. Consider both continuous and intermittent loads in a 24-hour period. Average over a week if loads change daily. 2. DETERMINE YOUR SOLAR INSOLATION ZONE Locate your site on the map below. The map represents average solar energy available in the winter. Available energy increases incrementally from zones 1 through 5. 3. USE THE PERFORMANCE TABLE TO CHOOSE YOUR SYSTEM The tables below represent the Watt-hours per day performance of each MAPPS system in the different solar zones. Choose your system voltage, then look down your solar zone column for the value that meets or exceeds your design load Watt-hours. Follow the row to the left for the corresponding prepackaged MAPPS system that will fully power your load requirements. Complimentary solar sizing analysis for your location can be provided with quotation 12 Volt MAPPS System Specifications 12 Volt DC Systems Solar Battery MAPPS ID Number Array Wattage MAP-85-216-12-C1D2 85 MAP-130-216-12-C1D2 135 MAP-170-216-12-C1D2 170 MAP-170-432-12-C1D2 170 MAP-260-216-12-C1D2 270 MAP-260-432-12-C1D2 270 Wholesale Pricing available for OEM's, Capacity Watt-hr Zone 1 MAPPS Whr/d Zone 2 MAPPS Whr/d Zone 3 MAPPS Whr/d 1866 55 111 166 1866 88 176 263 1866 111 221 332 3732 111 221 332 1866 176 351 527 3732 176 351 527 distributors, integrators & dealers Zone 4 MAPPS Whr/d Zone 5 MAPPS Whr/d 217 344 434 434 689 689 691 691 691 691 848 1696 List Price $ 4,388 $ 4,640 $ 4,964 $ 6,313 $ 5,324 $ 6,673 MAPPS CSA Class I DIV II Solar Power Systems for Hazardous Locations Design and Pricing Guide (p.2) 24 Volt MAPPS System Specifications 24 Volt DC Systems Solar Battery MAPPS ID Number Array Wattage MAP-100-108-24-C1D2 40 MAP-200-108-24-CI1D2 100 MAP-200-216-24-CI1D2 200 MAP-260-108-24-C1D2 260 MAP-260-216-24-C1D2 370 MAP-400-216-24-C1D2 400 MAP-600-216-24-C1D2 600 MAP-600-432-24-C1D2 600 MAP-800-432-24-C1D2 800 Wholesale Pricing available for OEM's, Capacity Watt-hr Zone 1 MAPPS Whr/d Zone 2 MAPPS Whr/d Zone 3 MAPPS Whr/d 1866 26 52 78 1866 65 130 195 3732 130 260 390 1866 169 338 507 3732 241 481 722 3732 260 520 780 3732 390 780 1170 7465 390 780 1170 7465 520 1040 1560 distributors, integrators & dealers Zone 4 MAPPS Whr/d Zone 5 MAPPS Whr/d 102 255 510 663 944 1020 1530 1530 2040 115 691 691 848 848 1696 1696 1696 3392 List Price $ 4,712 $ 4,964 $ 6,313 $ 5,324 $ 6,673 $ 7,447 $ 8,581 $ 13,849 $ 14,983 Load Power Requirement Example: Test the actual power draw of the equipment if you can. Add up all the loads in Watt-hr/day 12 VDC example: 1.2 Amps X 12 Volts = 14.4 Watts X 24 hr/day = 346 Watt-hr/Day Solar Electric Supply Inc. Headquarters 2880 Research Park Dr. Suite 100, Soquel, CA 95073 831-462-8243 www.solarelectricsupply.com Features • • • • • • High efficiency UL Listed, Class I Div II rated solar panels Heavy-duty aluminum pole mounting structure with stainless steel hardware Solar array Class I Div II approved conduit wiring harness kit UL Listed NEMA 3R/NEMA 4 durable powder-coated white aluminum battery control and component enclosure, lockable, includes sticker on inside door with specific Class I Div II certification Sealed gel cell, maintenance free, deep-cycle, non-spillable batteries, UL Recognized Advanced Charge Control, Class I Div II rated, with low voltage load protection and temperature compensated battery charging Extra room for your equipment - each system package has roughly 12 cu/in of extra space in the electronics compartment. There is plenty of room for you to add your own Class I Div II rated SCADA, radio, GPS, telemetry, VSAT, Wi-Fi or other electronic equipment. CSA Approved Class I, Div. II hazardous location safety rating