Legend Series
CX2000
Contoured Die Cast LED Exit Sign
Applications
Commercial interiors, conference rooms, lobbies, and
educational centres. Architecturally pleasing for all premium
installation applications. Everywhere that beauty can be
combined with reliability and safety.
Standard Features
CONSTRUCTION
• Slim contoured body design
• Powder coated die cast housing
• 120 to 347 volts AC input (universal)
• 6 to 48 volts DC input (universal)
• Energy consumption of less than 2 watts
• Meets or exceeds C860-01 requirements
• Black body with brushed aluminum face standard
• Self powered models come complete with self test and
diagnostics
• Brilliant red stencil lettering
• Premium specification grade exit sign
• Balanced brightness on all areas of the legend in both
AC and DC operation
Optional Features
• Custom colours
• Custom wording
Unit equipment certified to CSA standard C22.2 - No. 141 and recognized by
section 46 part 1 of the Canadian Electrical Code.
Electrical
AC INPUT:
120 through 347 VAC input, 60 Hz., 2 watts max.
DC INPUT:
6 to 48 VDC.
LIGHT SOURCE:
AC and DC illumination is provided by LED's (Light Emitting
Diodes)
DEPENDABILITY:
All unit electronics are individually fine tuned and for precision
operation using computerized test equipment. Once factory set,
adjustments cannot be made in the field; thereby preventing
adjustments by unauthorized personnel. Following final
assembly, 100% functional testing ensures constant reliable
operation. LED light sources are less susceptible to vibration
than conventional light sources for exit signs.
Legend Series
Dimensions
How To Order
CX2100-U-BA
Single face ceiling mount
CX2200-U-BA
Double face ceiling mount
Canopy
F "
4-9/16
E "
9-3/4
B "
8-7/8
6-1/4
G"
Warranty
LED exit light source AC only or AC/DC is warranted for 10
years. Self-powered LED exits are warranted for ten years on
the LED light source and one full year on the battery.
13-A1/4"
14-D1/8"
1-C
3/4"
A
B
C
D
E
F
G
13.25"
33.7cm
8.9"
22.6cm
1.75"
4.5cm
14.1"
35.8cm
9.75"
24.8cm
4.6"
11.7cm
6.25"
15.9cm
Optional Self-Diagnostic/Self Test Features
Specifications
Optional self powered units with the diagnostic/self test option have
a test switch, external AC on and service required indicators. The
diagnostic/self test option features continuous monitoring of the
charger assembly, battery and LED assembly current. If a fault is
indicated the external service required indicator will illuminate. The
internal fault indicators will then indicate the nature of the fault. A unit
with the diagnostic/self test option will self-test for 30 seconds every
30 days, 30 minutes every 60 days and 90 minutes annually.
The exit fixture shall be either single or double faced. Stencil
faceplate shall incorporate 6.0" (15.2cm) letter height and
0.75"(1.9cm) letter width.
The exit fixture shall be constructed of diecast aluminum and shall
have an optional canopy which shall fasten to the exit body for ease
of installation when required. Please specify mounting required.
The light source shall be long life LED's with a life expectancy of 25
years, consuming <2 watts in either AC or DC mode for AC/DC
fixtures and <3 watts for self-powered units.
Specifications
STANDARD
FACES
CX2
100U = Single face
200U = Double face
COLOUR
OPTIONS
BKBA = Black frame,
DC = 120 to 347VAC,
TP = Tamper proof
brushed face
6 to 48VDC
screws
BKBK = All black
SPD = 120 to 347VAC
VRTP = Tamper proof
WHBA = White frame, self-powered with diagnostics
screws and vandal
brushed face
resistant shield
WHWH = All white
BABA = All brushed
CH = Chrome
PB = Polished brass
BZ = Bronze
Add prefix NEX for Nexus System Interphase for self-powered units only.
Some option combinations may effect approval, please contact factory.
Printed in Canada. 10/03 PN 960.1936
VOLTAGE