4800 LED
CATALOG
NUMBER
Wet Niche Mount
Line or Low Voltage
Fountain Fixture
NOTES
Round Bezel
Square Bezel
TYPE
5 1/2”
(140)
DESCRIPTION
The 4800 Series wet niche-mounted fountain fixture is
smaller than other conventional units. They are available
with round or square bezel and uses a 9 Watt LED array.
The lamp housing is stainless steel with a cast bronze
door. The stainless steel niche includes a bonding lug
and a 3/4” conduit hub with 1/2” reducer or PG16 conduit hub. A clear tempered borosilicate lens is standard.
Round version of fixture is adjustable within the niche
15° from center axis.
Specifications
L:
W:
H:
Round Bezel
Square Bezel
6-5/8”
168 mm
5-1/2”
140 mm
6-1/8”
156 mm
6 1/8”
(156)
5 3/8”
(137)
5 1/2”
(140)
5 1/2”
(140)
3/4”
(19)
6 5/8”
(168)
5/8”
(16)
6 1/8”
(156)
5 3/8”
(137)
5 1/2”
(140)
ORDERING INFORMATION
3/4”
(19)
EXAMPLE: 4800 RD B LED 12 WHT53K MFL CLC NM 3445B RG CSL35 LP
6 5/8”
(168)
5/8”
(16)
4800
Model
4800
RD
Round
SQ
Square
B
LED
Bronze
121
WHT30K
White
NSP
Narrow Spot
1202
WHT41K
White
MFL
Medium Flood
WHT53K
White
AMB
Amber
RED
Red
GRN
Green
BLU
Blue
Lens
CLC
3
Convex Lens Clear
CLA4
Convex Lens Amber
CLB4
Convex Lens Blue
CLG4
Convex Lens Green
CLR4
Convex Lens Red
CLS
Convex Lens Spread
CLF
Convex Lens Frosted
Mounting
Conduit Entries
Accessories
Cord Set Length
Lamp
NM
3445B
3/4”
NPT at
45º
RG
CSL__
LP
1645B
PG16
at 45º
Niche Mt
Rock
Guard
5
35’-120’
of cord
available
in 5’
increments
Listing
Lamp
Installed
CSA
Optional
Canadian
Listing (for sale
in Canada only)
IEC 6
International
ElectroTechnical
Commission (for
use with 50HZ
applications
only)
Notes:
1 Transformer not included, sold separately
2 Internal transformer included.
3 CLC will be used if no lens is chosen.
4 Colored lenses not available with AMB, BLU, GRN, RED, or RBL LED colors.
5 CSL50 is the maximum cord length for 12V fixtures.
6 Only available with 12V and 1645B.
NOTE: Hydrel Reserves The Right To Modify Specification Without Notice. Any dimension
on this sheet is to be assumed as a reference dimension: “Used for information purposes
only. It does not govern manufacturing or inspection requirements.” (ANSI Y14.5-1973)
9144 Deering Avenue, Second Floor • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2014 Acuity Brands Lighting, Inc.
Rev. 12/02/14
4800_NM_LED
PERFORMANCE DATA
LUMEN OUTPUT
Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown, within the tolerances allowed by Lighting Facts. Actual performance
may differ as a result of end-user environment and application. Contact factory for performance data on any configurations not shown here.
3000K
80CRI
4000K
70CRI
5000K
70CRI
Distribution
Nema
Type
Beam Angle (50%)
HxV
Field Angle (10%)
HxV
Watts
LPW
Delivered
Lumens
SP
3x3
13.3 x 13.3
38.4 x 38.4
10
27
276
MFL
3x3
21.9 x 21.9
42.1 x 42.1
10
31
332
SP
3x3
13.3 x 13.3
38.4 x 38.4
10
46
459
MFL
3x3
21.9 x 21.9
42.1 x 42.1
10
52
554
SP
3x3
13.3 x 13.3
38.4 x 38.4
10
46
459
MFL
3x3
21.9 x 21.9
42.1 x 42.1
10
52
554
LED LIFE: L70/118,000 hours
OPERATING TEMPERATURE: -30°C through 40°C standard, above 40°C available with reduced milliamps.
DIMMING OPTIONS
OPTION A
120V POWER
0-10 Volt Dimmer Switch
4800 LED 12 volt
AC or DC
BPTA 60LED MVOLT LDIM
0-10 volt dimming Transformer
12 volt DC output
Can run up to 4 fixtures
OPTION B
120V POWER
4800 LED 12 volt
AC or DC
In-line dimmer
(Dimming below 7.5 volts
may cause flickering)
T1900 Series
12 volt dimming Transformer
AC
FEATURES & SPECIFICATIONS
FIXTURE HOUSING & DOOR: Stainless steel housing with heavy wall cast bronze or stainless
steel door.
NICHE: Stainless steel with cast bronze mounting assembly, which has provisions for positive
locking of fixture into position. The unit includes a grounding lug and a 3/4” conduit hub with 1/2”
reducer or PG16 conduit hub.
FASTENERS: Stainless steel.
ACCESSORIES: Rock Guard: Cast bronze rock guard available. NOTE: Rock guard is
required on floor mounted fixtures.
LISTING: CSAUS, CSA
LAMP: 9 Watt LED
WARRANTY: 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
LENS: 3 1/8” (80mm) diameter tempered borosilicate, clear convex standard. Frosted, amber,
blue, green or red lenses also available.
Consult factory for details
GASKET: Single-piece molded U-shaped silicone.
Actual performance may differ as a result of end-user environment and application.
CORD: Minimum of 35’ of #16-3ST submersible rated cord for US standard, 10m of HO7RN-F-2x4
submersible rated cord for European standard. Cord length must be specified.
Actual wattage may differ by +/- 5% when operating between 120-277V +/- 10%.
NOTE: Specifications subject to change without notice.
NOTE: Sufficient cord must be coiled in the niche to allow for the removal of the fixture above
water level for re-lamping.
9144 Deering Avenue, Second Floor • Chatsworth, CA 91311 • www.hydrel.com
Phone: 866.533.9901 • Fax: 866.533.5291
©2014 Acuity Brands Lighting, Inc.
Rev. 12/02/14
4800_NM_LED