FMM Institute
Centre for Professional Development
In-House
Training
Available
GAS SHIELDED TUNGSTEN ARC
WELDING (GTAW) - 1G/3G/6G
Advancement in engineering material and fabrication technology have
increased the demand for welds with requirements that can best be met
by adopting conventional and pulsed TIG welding. Certification will be in
accordance with the requirement of AWS D1.1, ASME IX, BS EN 287 and
DIN.
CONTENTS
♦
Safe Essentials in Welding
♦
Familiarisation with TIG Process
♦
Selection of Tungsten Electrodes and Shielding Gases
♦
Handling of Welding Equipment
♦
Welding Defects and Solutions
♦
Selection of Filler Alloys
♦
Welding Procedure Specification
♦
Preparation of Weld Joints
♦
Practice in Welding for 1G/3G/6G Position
OBJECTIVES
At the end of the programme, participants
will be able to:
♦
♦
Gain comprehensive knowledge on the
gas shielded tungsten arc welding
process
Perform gas shielded tungsten arc
welding process on finished products to
set standards
FACILITATOR
WHO SHOULD ATTEND
Welders/Fitters, Supervisors, Foreman,
Technicians and those who have to handle
welding in their job functions.
ADMINISTRATIVE DETAILS
Dates : November 5 - 9, 2012
Time : 9.00 am – 5.00 pm
Venue : Section 16
40200 Shah Alam
Selangor Darul Ehsan
Fees :
FMM Members - RM1,800 per participant (1G / 3G)
Non Members - RM2,000 per participant (1G / 3G)
Mr S. P. Narayanan is qualified in
Mechanical Engineering and Steam
Certificate Engineer and has 30 years of
experience in operation and maintenance
of palm oil mill, glove manufacturing plant
and cable manufacturing plant. He has
undergone various training in the United
Kingdom, Germany and Italy in controls
and automation systems and cable
manufacturing. He is currently involved in
failure analysis and wear problems in
palm oil and other industries. He has
conducted approximately 50 public
programmes on Reclamation Welding
Technology for Palm Oil Industries
(Certificate Course), Reclamation Welding
Technology for General Industries
(Certificate Course) and Welder
Certification – SMAW (ASME Section IX –
3G/6G).
For further enquiries, please contact:
Ms Kavitha / Ms Josephine
FMM Institute
Tel: 03-62867200
Fax: 03-62776712
Visit us at www.fmm.edu.my
FMM Members - RM3,000 per participant (6G)
Non Members - RM3,200 per participant (6G)
(Fees include course materials, Certificate of
Attendance, lunch and refreshments)
SBL Scheme
Registration is on a first-come first-served basis. Cheques
made in favour of the “FMM Institute” should be forwarded
one week before the commencement of the programme.
Completed registration form, that is faxed, mailed or e-mailed
to FMM Institute, would be deemed as confirmed.
All cancellations must be made in writing. There will be no
charge for cancellation received 10 or more working days
before the start of the programme. Cancellation received
6 – 9 working days before the start of the programme is
subject to a cancellation fee of 50% of the course fees.
Cancellation received 5 working days and below before the
start of the programme is subject to a cancellation fee of
100% of the course fees. If the participant fails to attend the
programme, the full course fees are payable. However,
replacement can be accepted at no additional cost.
10% group discount is applicable for registration of three (3)
or more participants from the same organisation and of the
same billing source.
The FMM Institute reserves the right to change the facilitator,
reschedule or cancel the programme and all efforts will be
taken to inform participants of the changes.
REGISTRATION FORM
GAS SHIELDED TUNGSTEN ARC WELDING (GTAW) - 1G/3G/6G
November 5 - 9, 2012 (Monday - Friday)
Section 16, Shah Alam
Please tick () accordingly:
PSMB Scheme: SBL Non Contributor
Required vegetarian meal: Yes
No
The Manager
FMM Institute
Tel: 03-62867200
Fax: 03-62776712
Email: training@fmm.org.my
Dear Sir/Madam,
Please register the following participant(s) for the above programme.
(To be completed in BLOCK LETTERS)
1. Name
Designation
E-mail
____________________________________________________________________________________________________________
Nationality
IC No.
____________________________________________________________________________________________________________
2. Name
Designation
E-mail
____________________________________________________________________________________________________________
Nationality
IC No.
____________________________________________________________________________________________________________
3. Name
Designation
E-mail
____________________________________________________________________________________________________________
Nationality
IC No.
____________________________________________________________________________________________________________
(If space is insufficient, please attach a separate list)
Enclosed cheque/bank draft No. ____________________________________ for RM ________________________________
being payment for _________________ participant(s) made in favour of the “FMM Institute”.
Submitted by:
Name:_____________________________________________________________________________________________________
Designation: ___________________________________E-mail: _____________________________________________________
Company: _________________________________________________________________________________________________
Address:___________________________________________________________________________________________________
____________________________________________________________________________________________________________
Tel No.: ______________________________ Fax No.: ________________________ Date: _______________________________
FMM Membership No.: ______________ My Corporate Identity No.: _____________________________________________