RIBBON LIGHT SERIES - Walters Wholesale Electric

advertisement
PART #: RL-XXDC-XX-XX-X-XX
Catalog #
Type
Projects
LIGHTING & ELECTRONIC DESIGN
Comments
Date
Prepared By
The 1 foot copper strip can be cut into smaller sections via cutting points, marked at regular
intervals, for easy fitting to a specific shape or length. The copper strip/diode assembly
comes with 3M high quality adhesive backing, which can be peeled off and pasted for easy
mounting. This flat LED strip emits directional light with a 1200 viewing angle.
APPLICATIONS:
- Interior & Architectural Feature
Lighting
- Exhibit Lighting
- Kitchen-Cabinet & Shelf Lighting
- Lighting Round Columns
- Project Lighting
- Locations with Limited Access or
Clearance
- Close Application Task Lighting
- Edge Lighting on Glass or Stone
- Sign Lighting
FEATURES:
-Available in low voltage 12 or 24V DC
-Exceptional Long Life (50,000+ hours)
-Unique Strip and Connector Design
-Ultra Thin for easy installation and fitting
-1.3W per foot for Green, Blue, & White;
1W per foot in Red & Yellow
-Ultra Durable
-ROHS compliant
-Easy to Install
-UL Listed
*If your company has a special project or specific need whether
color temperature or LED type, please contact our engineering
team for assistance.
Ordering Information:
RL
Series
Voltage
Color
12V DC
24V DC
R (Red)
Y (Yellow)
G (Green)
B (Blue)
CW (Cool White)
NW (Neutral White)
WW (Warm White)
Number of LEDs / Meter
30
60
120
Type
Length
I- (Indoor)
O- (Outdoor)
30 FT. Reel (Indoor)
16 FT. Reel (Outdoor)
*Custom Length Avaliable
Available by FT or Reel
*Custom Colors Avaliable
Ordering Example: RL-24VDC-NW-30-I-30
141 Cassia Way, Unit C Henderson, Nevada 89014
800-700-5483
Fax: 702-568-8753
[email protected]
www.ledlinc.com
Information is subject to change without notice. LED has made every effort to ensure that the information in this document is accurate. However, we cannot be held responsible for any
errors or omissions. © 2009 All rights reserved. Rev 1.1
RIBBON LIGHT SERIES
LED RIBBON LIGHT SERIES™ is less than 4mm thick offering the smallest profile of any led
product we offer; allowing easy installation in many confined spaces. Each 1 foot length of
LED Ribbon Light consists of a thin, ultra flexible copper strip with a plug-in connector every
foot avoiding the need for soldering. Led diodes are mounted directly to the copper strip,
which can then be directly connected with a power lead for easy connection to your power
supply.
PART #: RL-XXDC-XX-XX-X-XX
Catalog #
LIGHTING & ELECTRONIC DESIGN
Type
Projects
Comments
Date
Prepared By
DIAMGRAMS:
RIBBON LIGHT SERIES
LED RIBBON LIGHT SERIES™ is inherently safe with just the standard indoor or outdoor
laminate, but if it was punctured or cut, it would be electrically live. In a decorative architecture application, LED RIBBON LIGHT SERIES requires a fixture (extrusion) for proper installation. There are as many ways to create a protective fixture for LED RIBBON LIGHT SERIES as
there is uses for the product itself.
Extrusions consists of 2 parts - a “base” and a “lens”. The base of the extrusion is a simple ‘U’
channel, into which the LED RIBBON LIGHT SERIES lamp is slid, and a protective lens is either
snapped on or slid in.
Interior Extrusions:
E-Lite Technologies makes available interior extrusions for lamp widths of ¼, ½, 1, 3 & 6
inches.
ADT-0050C-10
EDT-0025C-5
*used for egress applications.
based on Wiremold® 400 and
800 series raceway. Limited
stock of 0075 is available.
141 Cassia Way, Unit C Henderson, Nevada 89014
800-700-5483
Fax: 702-568-8753
[email protected]
www.ledlinc.com
Information is subject to change without notice. LED has made every effort to ensure that the information in this document is accurate. However, we cannot be held responsible for any
errors or omissions. © 2009 All rights reserved. Rev 1.1
PART #: RL-XXDC-XX-XX-X-XX
Catalog #
LIGHTING & ELECTRONIC DESIGN
Type
Projects
Comments
Date
Prepared By
RIBBON LIGHT SERIES
Exterior Extrusions:
E-Lite Technologies makes available exterior extrusions only for lamp widths 2 inches. The
following components are available:
AWT-0200C-8
AWS-0200C-S
AWM-0200S-4
AWE-0200C 2"
2" Exterior Track (8 Foot Section)
2" Exterior Splice
2" Exterior Clip
Exterior End Cap
141 Cassia Way, Unit C Henderson, Nevada 89014
800-700-5483
Fax: 702-568-8753
[email protected]
www.ledlinc.com
Information is subject to change without notice. LED has made every effort to ensure that the information in this document is accurate. However, we cannot be held responsible for any
errors or omissions. © 2009 All rights reserved. Rev 1.1
Download