R x I2 R OH P PxR M S P PS AM P E S LT VO E W AT TS I I ExI E 2 TRANSCAT TECHNICAL REFERENCE E I Full-Load Current HP 1 /4 1 /3 1 /2 3 /4 1 11/2 2 3 5 71/2 10 15 20 25 30 40 50 60 75 100 125 150 200 Full-Load Current in Amperes Full-Load Current in Amperes Direct-Current Motors Single-Phase Alternating Current Motors 90V 4.0 5.2 6.8 9.6 12.2 — — — — — — — — — — — — — — — — — — 120V 3.1 4.1 5.4 7.6 9.5 13.2 17 25 40 58 76 — — — — — — — — — — — — 180V 2.0 2.6 3.4 4.8 6.1 8.3 10.8 16 27 — — — — — — — — — — — — — — 240V 1.6 2.0 2.7 3.8 4.7 6.6 8.5 12.2 20 29 38 55 72 89 106 140 173 206 255 341 425 506 675 500V — — — — — — — — — 13.6 18 27 34 43 51 67 83 99 123 164 205 246 330 550V — — — — — — — — — 12.2 16 24 31 38 46 61 75 90 111 148 185 222 294 Full-Load Current Two-Phase Alternating-Current Motors (4 wire) HP 1 /2 3 /4 1 11/2 2 3 5 71/2 10 15 20 25 30 40 50 60 75 100 125 150 200 115V 4 4.8 6.4 9 11.8 — — — — — — — — — — — — — — — — 230V 2 2.4 3.2 4.5 5.9 8.3 13.2 19 24 36 47 59 69 90 113 133 166 218 270 312 416 460V 1 1.2 1.6 2.3 3 4.2 6.6 9 12 18 23 29 35 45 56 67 83 109 135 156 208 575V 0.8 1.0 1.8 1.8 2.4 3.3 5.3 8 10 14 19 24 28 36 45 53 66 87 108 125 167 2300V — — — — — — — — — — — — — — — 14 18 23 28 32 43 For 90 and 80% power factor, the above figures should be multiplied by 1.1 and 1.25 respectively. HP 1 /6 1 /4 1 /3 1 /2 3 /4 1 11/2 2 3 5 71/2 10 115V 4.4 5.8 7.2 9.8 13.8 16 20 24 34 56 80 100 200V 2.5 3.3 4.1 5.6 7.9 9.2 11.5 13.8 19.6 32.2 46 57.5 208V 2.4 3.2 4 5.4 7.6 8.8 11 13.2 18.7 30.8 44 55 230V 2.2 2.9 3.6 4.9 6.9 8 10 12 17 28 40 50 The voltages listed are rated motor voltages. The listed currents are for system voltage ranges of 110 to 120 and 220 to 240. Running Overload Units Kind of Motor Number and Location of Over-Load Units, Such as Trip Coils or Relays Supply System 1-Phase AC or DC 1-Phase AC or DC 1-Phase AC or DC 1-Phase AC 2-Phase AC 2-wire, 1-phase AC or DC, ungrounded 2-wire, 1-phase AC or DC, one conductor ungrounded 3-wire, 1-phase AC or DC, grounded neutral Any 3-phase 3-wire, 2-phase AC, ungrounded 3-wire, 2-phase AC, 2-Phase AC one conductor grounded 2-Phase AC 4-wire, 2-phase AC, grounded or ungrounded 2-Phase AC 5-wire, 2-phase AC, grounded neutral or ungrounded 1 in either conductor 3-Phase AC Any 3-phase 3, one in each phase* 1 in ungrounded conductor 1 in either ungrounded conductor 1 in ungrounded conductor 2, one in each phase 2 in ungrounded conductors 2, one per phase in ungrounded conductors 2, one per phase in any ungrounded phase wire * Exception: Where protected by other approved means. Motor Branch—Circuit Protective Devices Maximum Rating or Setting Type of Motor InverseBreaker* PERCENT OF FULL-LOAD CURRENT Dual Non-Time Element Instantaneous Delay (Time-Delay) Trip Fuse** Fuse** Breaker Time Single-phase motors 300 AC polyphase motors other than wound-rotor Squirrel Cage: Other than design E 300 Design E 300 Synchronous 300 Wound rotor 150 Direct-current (constant voltage)150 175 800 250 175 175 175 150 150 800 1100 800 800 250 250 250 250 150 150 * The values given in the last column also cover the ratings of non-adjustable inverse time types of circuit breakers that may be modified ** The values in the Non-time Delay Fuse column apply to time delay class CC fuses CALL: 800-828-1470 FAX: 800-395-0543 WEB: www.transcat.com R Full-Load Current Full-Load Current Three-Phase Alternating Current Motors Induction Type Squirrel-Cage and Wound-Rotor Amperes Full-Load Current and Other Data Three Phase AC Motors Synchronous Type Unity Power Factor* Amperes HP 115 200 208 230 460 575 2300 230 460 575 2300 Volts Volts Volts Volts Volts Volts Volts Volts Volts Volts Volts /2 /4 1 11/2 2 3 5 73/4 10 15 20 25 30 40 50 60 75 100 125 150 200 250 300 350 400 450 500 4.4 6.4 8.4 12.0 13.6 — — — — — — — — — — — — — — — — — — — — — — 1 3 2.5 3.7 4.8 6.9 7.8 11.0 17.5 25.3 32.2 48.3 62.1 78.2 92 120 150 177 221 285 359 414 552 — — — — — — 2.4 3.5 4.6 6.6 7.5 10.6 16.7 24.2 30.8 46.2 59.4 74.8 88 114 143 169 211 273 343 396 528 — — — — — — 2.2 3.2 4.2 6.0 6.8 9.6 15.2 22 28 42 54 68 80 104 130 154 192 248 312 360 480 — — — — — — 1.1 1.6 2.1 3.0 3.4 4.8 7.6 11 14 21 27 34 40 52 65 77 96 124 156 180 240 302 361 414 477 515 590 0.9 1.3 1.7 2.4 2.7 3.9 6.1 9 11 17 22 27 322 41 52 62 77 99 125 144 192 242 289 336 382 412 472 — — — — — — — — — — — — — — — 16 20 26 31 37 49 60 72 83 95 103 118 — — — — — — — — — — — 53 63 83 104 123 155 202 253 302 400 — — — — — — — — — — — — — — — — — 26 32 41 52 61 78 101 126 151 201 — — — — — — — — — — — — — — — — — 21 26 33 42 49 62 81 101 121 161 — — — — — — — — — — — — — — — — — — — — — 12 15 20 25 30 40 — — — — — — The voltages listed are rated motor voltages. The currents listed shall be permitted for system voltage ranges of 110 to 120, 220 to 240, 440 to 480, and 550-600 volts. * For 90 and 80 percent power factor, the above figures shall be multiplied by 1.1 and 1.25, respectively. Three Phase AC Motor Windings and Connections 1. 1. 4. 7. 9. 6. 4. 7. 8. 9. 6. 5. 8. 3. 2. "Y" OR STAR 3. 5. 2. DELTA HIGH VOLTAGE 9 6 HIGH VOLTAGE 6 5 4 4 9 8 7 8 5 7 3 2 1 2 3 1 T-3 T-2 T-1 T-2 T-3 T-1 LOW VOLTAGE LOW VOLTAGE 6 5 4 4 9 6 9 8 7 8 5 7 3 2 1 2 3 1 T-3 T-2 T-1 T-2 T-3 T-1 NOTE Motor Horsepower 1 /2 230V 460 3 /4 230 460 1 230 460 11/2 230 460 2 230 460 3 230 460 5 230 460 71/2 230 460 10 230 460 15 230 460 20 230 460 25 230 460 30 230 460 40 230 460 50 230 460 60 230 460 75 230 460 100 230 460 125 230 460 150 230 460 Motor Ampere 2.2 1.1 3.2 1.6 4.2 2.1 6.0 3.0 6.8 3.4 9.6 4.8 15.2 7.6 22 11 28 14 42 21 54 27 68 34 80 40 104 52 130 65 154 77 192 96 248 124 312 156 360 180 Size Breaker 15 15 15 15 15 15 15 15 15 15 15 15 15 15 40 30 50 30 70 40 100 50 100 50 125 70 175 100 200 150 250 200 300 200 400 200 500 250 600 300 Size Starter 00 00 00 00 00 00 00 00 0 00 0 0 1 0 1 1 2 1 2 2 3 2 3 2 3 3 4 3 4 3 5 4 5 4 5 4 6 5 6 5 Heater Ampere 2.530 1.265 3.680 1.840 4.830 2.415 6.900 3.450 7.820 3.910 11.040 5.520 17.480 8.740 25.300 12.650 32.200 16.100 48.300 24.150 62.100 31.050 78.200 39.100 92.000 46.000 119.600 59.800 149.500 74.750 177.10 88.55 220.80 110.40 285.20 142.60 358.80 179.40 414.00 207.00 Size Wire 12 12 12 12 12 12 12 12 12 12 12 12 12 12 10 12 10 12 6 10 6 10 4 8 3 8 1 6 00 4 000 3 250 2 350 0 600 000 700 0000 Size Conduit 3 /4” 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 3 /4 1 3 /4 1 3 /4 11/2 1 11/2 1 11/2 1 2 11/2 2 11/2 21/2 11/2 3 2 31/2 2 4 21/2 Note: 1. Wire and conduit size will vary depending on type of insulation and termination listing. 2. The preceding calculations apply to induction type, squirrel-cage, and wound-rotor motors only. 3. The voltages listed are rated motor voltages; corresponding nominal system voltages are 220V to 240V, and 440V to 480V 4. Hertz: Preferred terminology for cycles per second. 5. Form coil: Coil made with rectangular or square wire. 6. Mush coil: Coil made with round wire. 7. Slip: Percentage difference between synchronous and operating speeds. 8. Synchronous speed: Maximum speed for A.C. motors or (Frequency x 120)/ Poles. 9. Full load: Speed at which rated horsepower is developed. 10. Poles: Number of magnetic poles set up inside the motor by the placement and connection of the windings. • THE MOST IMPORTANT PART OF ANY MOTOR IS THE NAME-PLATE. CHECK THE DCATA GIVEN ON THE PLATE BEFORE MAKING THE CONNECTIONS. • TO CHANGE ROTATION DIRECTIONS OF 3 PHASE MOTOR, SWAP ANY 2 T-LEADS CALL: 800-828-1470 FAX: 800-395-0543 WEB: www.transcat.com OH P PxR M S P S LT VO E PS AM P E I I ExI TRANSCAT TECHNICAL REFERENCE R W AT TS R x I2 E 2 E I