0.8
HDR series
mm Pitch
Interface Connectors
Connectors
Outline
Features
Principal
Applications
HDR series connectors are very small surface mount (SMT) interface
connectors with their contacts arranged at a pitch of 0.8 mm, designed for
the purpose of saving extra space on printed circuit boards.
• Long-life design allowing up to 5,000 mating cycles
• Low profile with overall height of 5mm from the PCB surface
• Sequential structure allowing up to two stacked connections
• One-touch-lock-type and detachable / re-attachable housing
• EMI/ESD-shielded and over-molded type metal housing
• IDC type connector on the cable end allows simultaneous termination
Portable information terminals, smaller-sized office automation equipment,
and their peripherals
Rated voltage
Electrical
Characteristics
125V AC (r.m.s.)
Rated current
Insulation resistance
0.5 A
Over 1000 megohms at 250V DC
Dielectric withstanding voltage
Contact resistance
350V AC (r.m.s.)
70 milliohms or less
Document Disclaimer
When placing orders with us, minimum order quantities are set for every product.
Be sure to contact us before starting preliminary design of PCBs using our connectors.
The specifications and information shown in the catalog are subject to change without notice.
Reflow temperature profile
(for reference purposes)
Flow temperature profile
(for reference purposes)
5sec
(Peak)
250˚C
260±5˚C
220˚C
(Full heating
period)
30~60sec
150~180˚C
100~130˚C
30~60sec
(Preheating period)
90~120sec
The reflow temperature profile shown in this drawing is for reference
purposes. This profile depends on requirements such as reflow
equipment, soldering paste, and PCB size. Thus, this profile may not
meet with your specific situation. Please evaluate your PCB-mounting
soldering and set your own reflow temperature profile.
The flow temperature profile as shown above is for reference
purposes. This profile depends on requirements such as the PCB size.
Thus, this profile may not meet with your specific situation. Please
evaluate your PCB-mounting soldering and set your own flow
temperature profile.
ΩApplicable products
HDR-EA( )LMYPG1-( )( )+
HDR-EA( )LFYPG1-( )( )+
ΩApplicable products
HDR-EC( )FDT( )-( )+
HDR-EC( )LFDT( )-( )+
The profile shown in this drawing is applicable only for those products shown above.
The profile shown in this drawing is applicable only for those products shown above.
Product List
IDC type male connector for
cable
HDR-E( )MAG1+
Soldering type male connector for
cable
HDR-E( )MSG1+
Straddle SMT type male
connector for PCB
HDR-E50MT( )+
Right-angle SMT type male
connector for PCB
HDR-EA( )LMYPG1-( )( )+
A-6HDR
HDR series...4
A-7HDR
HDR series...5
A-8HDR
HDR series...6
A-9HDR
HDR series...7
IDC type female connector for
cable
HDR-E( )FAG1+
Right-angle SMT type female
connector for PCB
HDR-EA( )LFYPG1-( )( )+
Straight through hole type female
connector for PCB
HDR-EC( )FDT( )-( )+
Right-angle through hole type
female connector for PCB
HDR-EC( )LFDT( )-( )+
A-10HDR
HDR series...8
A-11HDR
HDR series...9
A-12HDR
HDR series...10
A-13HDR
HDR series...11
EMI-filtered vertical plastic
housing for standard and thin
cable
HDR-E( )LP( )( )-( )
A-14HDR
HDR series...12
EMI-filtered screw-lock vertical
type plastic housing
HDR-E26LPH
A-15HDR
HDR series...13
0.8mm pitch connector
For cable
IDC type male connector for cable
HDR- E( )MAG1+
IDC
EMI shielded
● Configuration of product Part No.
HDR- E ( ) M A G1+
➀
➁ ➂ ➃ ➄ ➅
➀ Series name
➁ E: With metal shell
➂ No. of contacts: 14, 26 or 50
➃ Type of contact
M: IDC type, Male
➄ Compatible cable
A: AWG#30 (7/0.1), dia. 0.58mm
➅ Contact plating
G1: 0.76μm or more Gold plate
A
B
POS.#1
0.8
3.7
5.4
➀
LAST POS.
C
14 contacts
➂
➁
6.7
14
14.9
8
15˚
26
50
14 contacts
B
14
26
➃
26 contacts
B
➄
● Components
● Dimensions
➀ Contacts
➁ Shell
➂ Insulator
Part No.
HDR-E14MAG1+
A
10.8
➃ Spacer
HDR-E26MAG1+
➄ Cable housing
HDR-E50MAG1+
Mating connector: HDR series SMT type or through hole type female connector
For use with housings: HDR series upright housing
Required tools: Termination tool: FHAT-0029, IDC tool: FHPT-923B, Hand presser: MFC-K1 (Refer to page Tool-10)
Through
hole
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
B
0.8≈6=4.8
C
9.0
15.6
0.8≈12=9.6
13.8
25.2
0.8≈24=19.2
23.4
0.8mm pitch connector
For cable
Soldering type male connector for cable
HDR-E( )MSG1+
Soldering
EMI shielded
● Configuration of product Part No.
HDR- E ( ) M S G1+
➀
➁ ➂
➃ ➄ ➅
➀ Series name
➁ E: With metal shell
➂ No. of contacts: 26 or 50
➃ Male
➄ Soldering
➅ Contact plating
G1: 0.76μm or more Gold plate
C
0.8
POS.#1
1
6.7±0.15
13
16.2±0.5
POS.#n/2
A
C
POS.#1
0.8
5.4±0.3
POS.#n/2
POS.#n
15
˚
POS.#n/2+1
B
14
POS.#n/2+1
26
POS.#n
0.8
C
26-contact connector
● Dimensions
HDR-E26MSG1+
Part No.
A
15.6
B
13.8
C
0.8≈12=9.6
HDR-E50MSG1+
25.2
23.4
0.8≈24=19.2
Mating connector: HDR series female connector
For use with housings: HDR-E( )LPH
Others
Wire
wrapping Crimping Soldering
IDC
Press-in
SMT
Through
hole
0.8 mm pitch connector
For PCB
Straddle SMT type male connector for PCB
HDR-E50MT( )+
Straddle SMT
● Configuration of product Part No.
HDR- E 50 MT ( )+
➀
➁
➂
➃
➀ Series name
➁ No. of contacts: 50
➂ Type of contact
MT: Straddle SMT type, male
➃ PCB thickness
Blank: 0.4 mm
A
: 0.8 mm
0.8≈24=19.2
0.8
➀
POS.#1
POS.#25
25
14.9
➁
1
6.7
➂
25.2
0.8≈24=19.2
POS.#1
POS.#25
5.4
0.8
POS.#26
23.4
POS.#50
POS.#1
➀ Contacts
➁ Insulator
➂ Shell
3.5±0.05
2-C
0.1
0.45±0.03
0.8±0.05
0.8≈24=19.2±0.1
–0.1
22.6≠0.05
3.5±0.05
2
C0
.
2-
● Components
POS.#26
0.45±0.03
0.8±0.05
0.8≈24=19.2±0.1
Prohibited area for mounting parts
Recommended PCB layout
Mating connector: HDR series SMT type female connector
SMT
POS.#50
POS.#50
POS.#26
Through
hole
POS.#25
5.5±0.1
50
5.5±0.1
26
15˚
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
0.8mm pitch connector
For PCB
Right-angle SMT type male connector for PCB
HDR-EA( )LMYPG1- ( )( )+
Right-angle SMT
● Configuration of product Part No.
HDR- EA ( ) LMY P G1- ( ) ( )+
➀
➁
➂
➃
➄
➀ Series name
➁ Contact pitch: 0.635 mm
➂ No. of contacts: 14 or 26
➃ Type of contact
LMY: Right-angle SMT type, male
➄ Contact plating
G1: 0.76 μm or more Gold plate
➅ ➆
➅ Lock screw
Blank : None
SL : Provided
➆ Length of lock screw
E: 6.6 (standard)
K: 3.3 (for HDR-E ( ) LPA-LS)
Compatible with B-to-B and B-to-C
➀
➃
5
1.7
➄
➆
➁
➇
A
B
C
0.8
POS.#n/2
➂
POS.#n/2≠1
D
15˚
ø1.1
ø1.7
POS.#n
0.8
5
3.7
2.5
POS.#1
➀ Insulator A
➁ Shell
POS.#n/2≠1
0.635±0.03 POS.#n/2
POS.#n
➅
0.635
F
B
POS.#n
0.2~0.25
E±0.1
B±0.1
G±0.1
2-ø1.8±0.1
3±0.15
POS.#n/2
2.5±0.1
2-ø2.3±0.05
6±0.15
6.6
0.335
±0.03
7.2±0.1
3
10.7 REF.
POS.#1
F±0.05
POS.#n/2+1
POS.#1
≠0
4–0.15
● Components
1.6
17.4
6.7
E
3±0.15
Recommended PCB layout
➂ Contacts
: PAD
➃ Insulator B
● Dimensions
➄ Square nuts
➅ Hold down
➆ Hex nuts
A
Part No.
HDR-EA14LMYPG1-( )( )+ 20.0
B
14.4
C
4.8
D
9
E
9.2
➇ Lock screw
HDR-EA26LMYPG1-( )( )+ 24.8
19.2
9.6
13.8
14
F
8.255
G
19.0
15.875 23.8
Mating connector: HDR series IDC type or solder type female cable connector
For use with housing: -SLE: HDR series vertical housing
-SLK: HDR series vertical housing -LS, -LSA
Others
Wire
wrapping Crimping Soldering
IDC
Press-in
SMT
Through
hole
0.8mm pitch connector
For cable
IDC type female connector for cable
HDR-E( )FAG1+
IDC
EMI shielded
● Configuration of product Part No.
HDR- E ( )F A G1+
➀
➁ ➂ ➃ ➄ ➅
➀ Series name
➁ E: With metal shell
➂ No. of contacts: 14 or 26
➃ Type of contact
F: IDC type, female
➄ Compatible cable
A: AWG#30 (7/0.1), dia. 0.58 mm
➅ Contact plating
G1: 0.76 μm or more Gold plate
A
B
0.8
POS.#1
5.4
POS.#n/2
POS.#n
15˚
POS.#n/2+1
3.5
14.2
6
C
➂
14
8
➀
➁
➃
➄
● Components
➀ Contacts
● Dimensions
➁ Insulator
➂ Shell
Part No.
➃ Spacer
HDR-E14FAG1+
A
10.8
B
4.8
C
8.8
➄ Cable housing
HDR-E26FAG1+
15.6
9.6
13.6
Mating connector: HDR series SMT type male connector
For use with housings: HDR series vertical housing
Required tools: Termination tool: FHAT-0029, IDC tool: FHPT-923B, Hand presser: MFC-K1 (Refer to page Tool-10)
Through
hole
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
0.8mm pitch connector
For PCB
Right-angle SMT type female connector for PCB
HDR-EA( )LFYPG1-( )( )+
Right-angle SMT
● Configuration of product Part No.
HDR- EA ( ) LFY P G1- ( ) ( )+
➀
➁
➂
➃
➄
➀ Series name
➁ Contact pitch: 0.635 mm
➂ No. of contacts: 14 or 26
➃ Type of contact
LFY: Right-angle SMT type, female
➄ Contact plating
G1: 0.76 μm or more Gold plate
➀
➃
5
1.7
➅
➆
➅ Lock screw
Blank : None
SL : Provided
➆ Length of lock screw
E: 6.6 (standard)
K: 3.3 (for HDR-E ( ) LPA-LS)
Compatible with B-to-B and B-to-C
➆
➁
➇
A
B
C
0.8
ø1.1
ø1.7
F
0.635
F
B
±0.15
6
➅
POS.#1
0.2~0.25
E±0.1
B±0.1
G±0.1
2-ø1.8±0.1
3±0.15
POS.#n/2+1
➁ Shell
7.2±0.1
2-ø2.3±0.05
6.6
10.7 REF.
POS.#n/2
0.635 ±0.03 POS.#n/2+1
POS.#1
0.335
4
1.6
16.7
➀ Insulator A
POS.#n
±0.05
±0.05
2.5 ±0.1
POS.#n/2+1
POS.#n/2
POS.#n
● Components
0.8
15˚
≠0
–0.15
D
6
POS.#n
3.5
➂
2.5
POS.#1
5
POS.#n/2
➄
3 ±0.15
: PAD
Recommended PCB layout
➂ Contacts
➃ Insulator B
➄ Square nuts
● Dimensions
➅ Hold down
➆ Hex nuts
Part No.
HDR-EA14LFYPG1-( )( )+
A
20.0
B
14.4
C
4.8
D
8.8
E
9.2
F
8.255
G
19.0
➇ Lock screw
HDR-EA26LFYPG1-( )( )+
24.8
19.2
9.6
13.6
14
15.875
23.8
Mating connector: HDR series IDC or solder type male cable connector
For use with housing: -SLE: HDR series vertical housing
-SLK: HDR series vertical housing -LS, -LSA
Others
Wire
wrapping Crimping Soldering
IDC
Press-in
SMT
Through
hole
0.8mm pitch connector
For PCB
Straight through hole type female connector for PCB
HDR-EC( )FDT( )-( )+
Straight Through hole
EMI shielded
● Configuration of product Part No.
HDR- EC ( ) FD T ( )- ( )+
➀
➁
➂ ➃ ➄
➅
➀ Series name
➅ Lock screw
➁ No. of contacts: 14 or 26
Blank: None
➂ Type of contact
SL : Provided
FD: Straight through hole type, female
(Panel thickness: 1.12 mm)
➃ With ground contact
➄ Contact plating
G2: Min. 0.76 μm Gold plate
∞
£
6
14
15˚
X+0.2
0
2.2±0.1
R1.1
● Components
M2≈0.4
1.12
Recommended PCB layout
1.3
R0.5
POS.#1
D±0.05
0.775±0.03
7.5±0.3
1
26
POS.#2
2-ø1.75±0.08
POS.#n ø1±0.05
0.8±0.03 (PAD)
2.3
5.2±0.1
5
±0.3
13
¢
(PAD)
2-ø2MAX.
2-ø1.2±0.05
1.55
2.975
±0.15
11.5±0.3
¡
A±0.2
F
C
0.8≈(n/2-1)= B
0.8
ø0.65±0.05 POS.#1
POS.#2
2.975±0.03
1.96±0.03
1.15±0.03
1.15±0.03
0.98±0.03
™
0.8
POS.#n
E±0.05
B±0.05
2.125±0.03
E
D
B
Y±0.1
Recommended panel
cut-out dimensions
➀ Insulator
➁ Contacts
● Dimensions
➂ Shell
➃ Lock screws
Part No.
HDR-EC14FDT( )-( )+
➄ Board lock pin
HDR-EC26FDT( )-( )+ 24.8 0.8≈12=9.6 13.6 12.3 13.85 14.4
Mating connector: HDR series male connector
Through
hole
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
A
20
B
0.8≈6=4.8
C
8.8
D
7.5
E
F
9.05 19.2
0.8mm pitch connector
For PCB
Right-angle through hole type female connector for PCB
HDR-EC( )LFDT( )-( )+
Right-angle Through hole
EMI shielded
● Configuration of product Part No.
HDR- EC ( ) LFD T ( )- ( )+
➀
➁
➂
➃ ➄
➅
➀ Series name
➅ Lock screw
➁ No. of contacts: 14, 26 or 50
Blank: None
➂ Type of contact
SLD : Screw lock
LFD: Right-angle through hole type, female SLE : Spring lock
➃ With ground contact
SLG : Screw lock
➄ Through hole length, contact plating
(Panel thickness: 1.12 mm)
Blank : 1.65 mm, Min. 0.1 μm Gold plate
1
: 2.08 mm, + Min. 0.5 μm Palladium alloy
G2 : 2.08 mm, Min. 0.76 μm Gold plate
9.55 REF.
¡
™
6
15.55
£
Lock screw
§
1.12
6.6
5.8
A±0.2
B
POS.#2
POS.#1
5
2.32
3.5
POS.#(n/2)
C
0.8≈(n/2-1)
=D±0.08
M2≈0.4
POS.#(n/2+1)
∞
POS.#2
POS.#1
6.6
ø0.9+0.15
-0
● Components
¢
POS.#(n/2+1)
0.8
0.4
E
6.1±0.1
POS.#n
POS.#(n/2)
1.2±0.03
1.15±0.03
ø0.65 ±0.05
E±0.1
0.8±0.03
1.15±0.03
4.6±0.05
POS.#n
0.4±0.03
POS.#1
POS.#2
4.5±0.1
POS.#n
15
˚
2-ø2.3±0.1
2-ø3+0.2
-0
B±0.05
Edge of PCB
Recommended PCB layout
➀ Shell
➁ Insulator
● Dimensions
➂ Contacts
Part No.
HDR-EC14LFDT( )-( )+
➃ Bracket
➄ Board lock
A
20
B
14.4
C
8.8
D
0.8≈6=4.8
E
5.2
HDR-EC26LFDT( )-( )+ 24.8 19.2 13.6 0.8≈12=9.6 10
HDR-EC50LFDT( )-( )+ 34.4 28.8 23.2 0.8≈24=19.2 19.6
§ Lock screw
Mating connector: HDR series male connector
Others
Wire
wrapping Crimping Soldering
IDC
Press-in
SMT
Through
hole
0.8mm pitch connector
Housing
EMI-filtered vertical plastic housing for standard and thin cable
HDR-E( )LP( )( )-( )
Vertical
EMI shielded
● Configuration of product Part No.
HDR- E ( ) LP ( )( )- ( )
➀
➁
➂ ➃ ➄
➀ Series name
➁ No. of contacts 14, 26 or 50
➂ Type of housing: Vertical type
➃ Compatible cable
A: Standard cable
B: Thin cable
➅
➄ Color of housing
Blank: Gray
5
: Black
➅ Length of lock spring
Blank: PCB side lock screw -SLE
LS : PCB side lock screw -SLK
B
8
25
10
C
A
● Dimensions
Part No.
HDR-E14LPA( )-( )
A
21.0
B
17.0
HDR-E26LPA( )-( )
25.8
21.8
HDR-E50LPA( )-( )
HDR-E50LPB( )-( )
For use with connectors: HDR series IDC type cable connector HDR-E( )MAG1+, HDR-E( )FAG1+
Required tools: Clamp caulking tools: FHPT-0024A, for 14 contacts cable connectors (Refer to page Tool-10)
FHPT-0022A, for 26 contacts and 50 contacts thin cable connectors
FHPT-0023A, for 50 contacts thick (standard) cable connectors
Through
hole
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
35.4
31.4
C
ø5.6
6≈6.7
7≈8.7
6≈6.7
0.8mm pitch connector
Housing
EMI-filtered screw-lock vertical type plastic housing
HDR-E26LPH
Vertical
EMI shielded
● Configuration of product Part No.
HDR- E 26 LP H
➀
➁ ➂
➀ Series name
➁ No. of contacts: 26
➂ Type of housing
➃ Serial number
➃
6≈7
HONDA
JAPAN
3
38.14
34.59
25.34
26.2
19.2
Screw size
M2≈0.4
8
24.2
Mating connector: HDR series female connector
For use with connector: HDR-E26MAG1+, HDR-E26MSG1+
Required tools: Clamp caulking tools: FHPT-0022A
(Refer to page Tool-10)
MHPT-0006A
Others
Wire
wrapping Crimping Soldering
IDC
Press-in
SMT
Through
hole
0.8 mm pitch connector
EMI-filtered vertical type plastic housing with mounting
hardware for spring-lock, for heavy wires and relay connections
HDR-E26LPKA+
Housing
For Relay connections
EMI-filtered countermeasures
● Configuration of product Part No.
HDR- E 26 LP K A+
➀
➁
➂
➃ ➄
➀ Series name
➁ No. of contacts: 26
➂ Form of housing
Vertical type housing
➃ Serial number
For use with cables: Outside diameter of heavy wire: 10.0-11.7 mm
➄ Thickness of relay panel: 1.6 mm
15.6
15.37
Ø11.7 Max.
Ø11.7
£
∞
37.09
™
1.6
¡
Panel
19.2
M2≈0.4
Connector
¢
13.2
8
24.2
● Components
➀ Plastic Cover
➁ Inner Shell B
➂ Inner Shell A
➃ Lock Screw
➄ Plate (For lock screw)
Mating connector: HDR series of spring-lock type connector
For use with connectors: HDR series of soldering type male or female connector
HDR series of IDC type male or female connector
Dip
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
HDR series
0.8 mm pitch connector
EMI-filtered screw-lock vertical type plastic housing
for heavy wires
HDR-E26LPK+
Housing
Vertical type
EMI-filtered countermeasures
● Configuration of product Part No.
HDR- E 26 LP K+
➀
➂
➁
➃
➀ Series name
➁ No. of contacts: 26
➂ Form of housing
Vertical type housing
➃ Serial number
For use with cables: Outside diameter of cable: 10.0-11.7 mm
Ø11.7
13.2
¢
38.14
25.34
37.09
£
™
¡
13
24.2
8
M2≈0.4
Connector
11.6
19.2
● Components
➀ Plastic Cover
➁ Inner Shell B
➂ Inner Shell A
➃ Thumb screw
Mating connector: HDR series of screw-lock type connector
For use with connectors: HDR series of soldering type male or female connector
HDR series of IDC type male or female connector
Dip
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
HDR series
0.8 mm pitch connector
EMI-filtered spring-lock vertical type plastic housing
HDR-E26LPJ+
Housing
Vertical type
EMI-filtered countermeasures
● Configuration of product Part No.
HDR- E 26 LP J+
➀
➁
➂
➃
➀ Series name
➁ No. of contacts: 26
➂ Form of housing
Vertical type housing
➃ Serial number
6.4
7
21.8
8
¡
35
™
∞
¢
£
§
25.8
● Components
➀ Plastic Cover A
➁ Plastic Cover B
➂ Inner Shell B
➃ Button
➄ Inner Shell A
➅ Lock spring
Mating connector: HDR series of spring-lock type connector
For use with connectors: HDR series of soldering type male or female connector
HDR series of IDC type male or female connector
Dip
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
HDR series
0.8 mm pitch connector
EMI-filtered vertical type plastic housing with mounting
hardware for spring-lock, for thin wires and relay connections
HDR-E26LPHA+
Housing
For Relay connections
EMI-filtered countermeasures
● Configuration of product Part No.
HDR- E 26 LP H A+
➀
➁
➂
➃ ➄
6.0
➀ Series name
➁ No. of contacts: 26
➂ Form of housing
Vertical type housing
➃ Serial number
For use with cables: Outside diameter of thin wire: 5.8-6.5 mm
➄ Thickness of relay panel: 1.6 mm
6.7
Ø6.5 Max.
£
∞
™
34.59
HONDA
JAPAN
1.6
¡
Panel
19.2
¢
Connector
8
24.2
● Components
➀ Plastic Cover
➁ Inner Shell B
➂ Inner Shell A
➃ Lock Screw
➄ Plate (For lock screw)
Mating connector: HDR series of screw-lock type connector
For use with connectors: HDR series of soldering type male or female connector
HDR series of IDC type male or female connector
HDR series
Others
Wire
wrapping Crimping Soldering
IDC
Press-in
SMT
Dip
0.8 mm pitch connector
Soldering type female connector for cables
HDR-E26FSG1+
For cables
Soldering type
EMI-filtered countermeasures
● Configuration of product Part No.
HDR- E 26 FS G1+
➀
➁
➂
➃
➄
➀ Series name
➁ With metal shell
➂ No. of contacts: 26
➃ Form of housing
FS: Soldering type, female connector, AWG#28
Insulator OD: 1.0 mm max.
➄ Contact plating
G1: Min. 0.76 mm Gold plate
0.8≈12=9.6
0.8
Pos.#13
6
9.4
Pos.#1
15.6
0.8≈12=9.6
Pos.#13
0.8
™
¢
5.4
Pos.#1
Pos.#26
¡
£
Pos.#14
15
˚
13.6
● Components
➀ Female Contact
➁ Shell
➂ Insulator
➃ Spacer
Pos.#26
0.8
Pos.#14
0.8≈12=9.6
Mating connector: HDRA series, male connector
For use with connectors: HDR-E26LPH( ), HDR-E26LPJ+, HDR-E26LPK( ), HDR-E26ALP( )+
HDR series
Others
Wire
wrapping Crimping Soldering
IDC
Press-in
SMT
Dip
0.8 mm pitch connector
EMI-filtered screw-lock right-angle type plastic housing
HDR-E26ALPA+
Housing
Right-angle
EMI-filtered countermeasures
● Configuration of product Part No.
HDR- E 26 ALP A+
➀
➁
➂
➃
19.1
18.85
➀ Series name
➁ No. of contacts: 26
➂ Form of housing
Right-angle
➃ Serial number
For use with cables: Outside diameter of cable: 6.2-6.8 mm
24.8
19.2
∞
¢
£
19.1
¡
™
5.9
● Components
➀ Plastic Cover A
➁ Plastic Cover B
14.825
29
6.7
8
7.5
15.6
PCB-side connector
➂ Inner Shell B
➃ Inner Shell A
➄ Thumb screw
Mating connector: HDR series of screw-lock type connector
For use with connectors: HDR series of soldering type male or female connector
HDR series of IDC type male or female connector
HDR series
Others
Wire
wrapping Crimping Soldering
IDC
Press-in
SMT
Dip
0.8 mm pitch connector
EMI-filtered screw-lock vertical type plastic housing
HDR-E50LPH
Housing
Vertical type
EMI-filtered countermeasures
● Configuration of product Part No.
HDR- E 50 LP H
➀
➂
➁
➃
➀ Series name
➁ No. of contacts: 50
➂ Form of housing
Vertical type housing
➃ Serial number
Ø9
¢
£
38.14
34.59
¡
3
0.8
25.34
™
33.8
M2≈0.4
8
10
Connector
HDR-E50MSG1+
28.8
● Components
➀ Plastic Cover
➁ Inner Shell B
➂ Inner Shell A
➃ Thumb screw
Mating connector: HDR series of screw lock type connectors
For use with connectors: HDR-E50MSG1+
HDR-E50M( )G( )+
Dip
SMT
Press-in
IDC
Wire
Soldering Crimping wrapping
Others
HDR series