Sivoia QED
®
| specification guide
architectural shading solutions
roller shades
drapery track systems
Roman shades
Sivoia QED
®
| table of contents
Sivoia QED
What’s new......................................................02
Transforming daylight.......................................04
Shading systems product line..........................05
Innovations in daylight control..........................06
Electronic Drive Unit........................................07
Shade Configuration Tool (SCT).......................08
Roller shades
System selection guide....................................10
Roller shade overview......................................12
roller 20TM........................................................14
roller 64TM........................................................16
roller 100TM......................................................18
roller 225TM......................................................24
roller 200CW...................................................26
Effective daylight management........................30
Roller shade fabric selection............................31
SheerShade® roller shade fabrics.....................32
SheerShade DesignerTM roller shade fabrics.....43
Privacy roller shade fabrics..............................45
Blackout roller shade fabrics............................46
COM fabrics and custom printing....................49
Bottom bar options.........................................50
Drapery track
System selection guide....................................52
System overview.............................................54
Mounting options.............................................55
System capacity..............................................56
System installation...........................................57
Pinch pleat drapery panels..............................58
Ripplefold drapery panels................................59
Curved drapery track.......................................60
Designer Roman shades
System selection guide....................................62
Designer Roman shades.................................64
Style options....................................................65
Soft fabric specifications..................................66
Shade dimensions...........................................67
Woven woods specifications...........................68
Controls
seeTouch® keypads.........................................70
seeTouch keypads color options......................71
seeTouch control options.................................72
Euro-style control options................................76
IR remote control.............................................77
Lutron® dimmers..............................................80
Lutron accessories..........................................82
Wiring
Wiring overview...............................................84
Individual transformers.....................................85
Power panel....................................................86
Power panel wiring diagram.............................87
Lutron supplied cable......................................88
Integration
Residential.......................................................90
Commercial.....................................................91
Lighting control interfaces................................92
Specification tools
Specification tools...........................................94
Specification overview.....................................96
|
Lutron 01
Sivoia QED
®
| what’s new
Standard capacity drapery track - page 52
The standard capacity Sivoia QED drapery track system has a slim profile,
ultra-quiet performance, and enhanced power capacity.
One-touch control of individual or groups of drapery for fully-open,
fully-closed, or preset positions
•
Integrates seamlessly with Sivoia QED roller shades and
Roman shades
•
Patented technology virtually eliminates noise in tracks
•
Left-draw, right-draw, and center-draw systems available
•
Curved and straight tracks available, with either pinchpleat or ripplefold drapes
•
High-capacity drapery track for drapes up to 150 lbs (available summer 2008)
•
Manual open feature in case of power failure or user unfamiliarity
(available summer 2008)
• Track splicing for easy transportation of tracks to job site (available summer 2008)
•
roller 20TM - page 14
The new roller 20 shade system is the latest addition to the Sivoia QED
roller shade product line. It offers all of the benefits of Sivoia QED
technology, including quiet, precision movement of shades — all in a smaller
package. Roller 20 has a slim profile and narrow width, ideal for shallow
residential window frames. Now, homeowners can easily incorporate the
smallest and most advanced digitally controllable shading technology into
the design of their homes. roller 20 features:
•
Small tube diameter (1.25 in. [32mm]) fits into most
residential window frames
•
Smooth, quiet, precision controllable shading system
that responds at the touch of a button
•
A variety of fabric offerings to enhance the décor of
your clients’ homes
•
Elegantly styled keypads and controls that provide users
with intuitive control of the shades
|
02 Lutron
SheerLite fabrics - page 32
Lutron ’s new SheerLite fabric is the first of its kind. This SheerShade® fabric comes in 3%
and 5% openness factors that is thinner and lighter than other comparable offerings. These
features can allow for larger shades. The fabric is suitable for both residential and commercial
applications.
®
Value Select fabrics - page 33
The Value Select fabric collection offers customers a high-quality roller shade fabric selection
at a lower cost than Lutron’s standard fabric offering.
Value Select 1: A SheerShade basketweave fabric available in a 1% openness factor.
The fabric features a subtle striped texture and is ideal for situations where less
light transmission is desired.
Value Select 2: A SheerShade basketweave fabric available in an 8% openness factor.
The fabric maintains an external view in three unique weaves.
Value Select 3: A SheerShade basketweave available in a 3% openness factor. The
dual-sided fabric features one light-colored side to provide a uniform exterior appearance,
helping to reflect sunlight, and reduce solar heat gain.
New infrared transmitters - page 77
Lutron will introduce a newly expanded line of infrared transmitters
in summer 2008.
Classic single shade group control with raise/lower functionality
Control of a single shade group with raise/lower functionality and a
“favorite” scene button for each group
•
Control of a dual shade and/or drape group with raise/lower
functionality and a “favorite” scene button for each group
•
Control of a single shade group and a zone of lights with a “favorite” scene
button for each group
•
•
|
Lutron 03
Sivoia QED
®
| transforming daylight
Lutron® has been the world’s leading manufacturer of lighting control systems for more
than 45 years. Now, Lutron has opened up a new world of possibilities by seamlessly
integrating electric and daylight control systems with a focus on innovation, world-class
engineering, and customer service. Lutron blends technology with design and
environmental sensitivity to provide the ideal solution for any specification.
Applications
Residential
A Sivoia QED system allows a homeowner to
have convenient control of sunlight at the touch
of a button. Enhance any room in your home
with Sivoia QED ultra-silent operation.
Hospitality
Creating a comfortable experience in a
hotel room is a key element for a memorable
stay. Sivoia QED, along with Lutron lighting
controls, are integral to making your guests
feel welcome. Sivoia QED ultra-quiet operation
makes transitions subtle to preserve the
ambience in hospitality spaces.
Corporate
The control of daylight is critical for
productivity, comfort and energy savings in
applications such as corporate boardrooms,
training areas, conference rooms and
executive offices. Today’s dynamic business
environments require the flexibility to transition
a well-lit boardroom meeting into a
theater-style audio/video presentation
at the touch of a button.
|
04 Lutron
Lutron
®
| shading systems product line
Roller shades
Sivoia QED® roller shades offer:
•
Ultra-quiet operation
•
Uniform, precision movement of multiple shades
•
Minimal, symmetrical light gaps
•
Convenient one-touch control from elegant keypads
and intuitive handheld remotes
This system, along with drapery track systems and Roman
shades, can seamlessly integrate with Lutron lighting
controls to manage all the light in any space, or with other
systems such as security or climate control to maximize the
efficiency and versatility of any room or building.
Drapery track systems
The Sivoia QED line also includes drapery track systems for
pinch pleat and ripplefold drapery panels.
The Sivoia QED track system offers:
•
All of the quiet, precise control of the Sivoia QED family
•
Left-, right-, and center-draw drapery
•
Single or dual drapery tracks available
•
Straight and custom-curved tracks
•
Control of both pinch pleat or ripplefold style drapes
Roman shades
Sivoia QED designer Roman shades offer:
•
The same elegant movement and precise control
as Sivoia QED roller shades
•
The elegance of decorative pleats and flat or soft folds
Choose from a broad selection of natural woven woods
and exclusive designer fabrics that have been selected to
complement the Lutron Satin Colors® line of dimmers and
lighting controls.
|
Lutron 05
Sivoia QED
®
| innovations in daylight control
Quality and performance
The Sivoia QED family of quiet electronic drives
offers convenience at the touch of a button.
Lutron® quiet electronic drive technology provides
near-silent performance, operating shade smoothly
and in precise alignment.
Ultra-quiet electronic drive
The Sivoia QED drive operates roller shades and
draperies at a near-silent level rated at 44 dBA
at 3 ft (1 m).
Intelligent control
The Sivoia QED electronic drive unit (EDU)
optimizes shade and drapery track adjustment
by offering programmable presets. Save and recall
preset shade levels from an intuitive keypad.
Additionally, shades will move smoothly, in
unison, and with exact alignment.
|
06 Lutron
seeTouch® keypad (not shown actual size)
Simplified installation
The system can be configured and reprogrammed
at the point of control without any rewiring, without
access to the EDU, and without the use of a group
controller. The Sivoia QED mounting brackets allow
an installer to adjust the shade’s level, projection,
and side-to-side position, all after the shade has
been installed.
Integration of daylight and electric light
Lutron lighting control systems work together with
Sivoia QED controllable shading systems to offer
complete control of all the light in any space. Adjust
shades and draperies as lights dim or brighten to
generate light levels for any mood or activity.
Sivoia QED
®
| Electronic Drive Unit (EDU)
Communications circuit
•
Addresses, programs, and
reconfigures the system from
any system component: the EDU
mounted in the ceiling, keypad
installed in the wall or a handheld
remote control
•
Eliminates the need for external
“group controllers,” simplifying
programming and future changes
to the system
Hall effect sensors
•
Measures motor position
to ensure shades move
in unison and in
precise alignment
•
Digitally sets and
stores limits
Protection against
electrostatic discharge
Provides safe, controlled
discharge of potentially
damaging static created by
shade fabric
Gear-motor
Features precision helical gearing
design to ensure ultra-quiet operation
•
Electronic Drive Unit
(located inside roller shade tube)
Electronic drive circuit
•
Variable-speed motor
drive ensures silent,
accurate control
Back of circuit board
Microprocessor
•
Provides smooth, consistent shade
movement. Shades align and track together.
•
Eliminates audible starts and stops
•
Stores precise, user-defined preset levels
for each keypad
10-year power failure memory
Records motor movements to ensure that position
is accurately saved even if the EDU is active when
power is interrupted
|
Lutron 07
Lutron
®
| Shade Configuration Tool (SCT)
Shade Configuration Tool (SCT) software
This customer-acclaimed tool helps you
accurately and quickly layout and price jobs,
create project details for sign-offs, and create
professional-looking proposals for customers.
SCT checks design rules as you go, ensuring
that the shade you design can be built to your
specifications. The E-Quote and E-Order
features allow quotes and orders to be
submitted electronically.
New SCT features
•
Addition of new products:
Lutron continues to introduce new window system
product innovations. New products are available
within the SCT tool for easy quoting and ordering.
CAD drawings:
CAD drawings are now available to print with
SCT reports in order to provide clients with a
comprehensive job quote.
•
SPEED-E-quote feature:
Receive a quote back within 2 hours, 24 hours
a day, 7 days a week for standard products
•
Addition of various marketing materials:
-Lineal samples
-Demo cases
-Fabric samples
-Literature
•
|
08 Lutron
Sivoia QED
®
| roller shades
|
Lutron 09
Sivoia QED
®
Determine how
roller shade
will be installed
p Inside mount
p Outside mount
p Wall mount
p Ceiling mount
p Jamb mount
p Pocket mount
(Recess)
| roller shade system selection guide
Take
system
measurements
Roller shade size =
system height ______ x
system width _______
(bracket to bracket)
Specify
drive location
for pre-wiring
p Left drive
p Right drive
p TBD
Operator required:
p r oller 20TM
For shades up to
20 sq. ft. (1.86 sq. m)
Minimum width: 18.5 in. (470 mm)
Maximum width*: 8 ft. (2400 mm)
Maximum height*: 8 ft. (2400 mm)
p roller 64TM
For shades up to
64 sq. ft. (5.95 sq. m)
Minimum width: 18.5 in. (470 mm)
Maximum width*: 8 ft. (2400 mm)
Maximum height*: 8 ft. (2400 mm)
Specify wiring topology
p Individual transformers
(recommended for
installations requiring
local wiring)
p Power panel
(recommended for
installations requiring
centralized wiring)
p roller 100TM
For shades up to
100 sq. ft. (9.29 sq. m)
Minimum width: 24 in. (610 mm)
Maximum width*: 10 ft. (3000 mm)
Maximum height*: 10 ft. (3000 mm)
p roller 225TM
For shades up to
225 sq. ft. (20.9 sq. m)
Minimum width: 31.62 in. (803 mm)
Maximum width*: 15 ft. (4600 mm)
Maximum height*: 15 ft. (4600 mm)
|
10 Lutron
* Maximum shade size may vary based on fabric selection. Contact customer
service or use SCT for actual shade dimensions based on fabric type.
Sivoia QED
®
| roller shade system selection guide
Specify
fabric
roll detail
p Regular
(standard)
pR
everse
Specify
fabric
p SheerShade®
Fabrics feature open
glass
weaves, so sunlight is
filtered while preserving
the view.
glass
(recommended for
applications where
objects such as
handles or levers
protrude from the
window and may
interfere with
shade travel)
p TBD
p Privacy
These fabrics permit
some light, but are
not open weaves, so
the view is limited to
shapes and shadows.
p Blackout
These fabrics prevent
all light from passing
through the material.
Specify
lineal
requirements
p Fascia
p Pocket with flap
p Flap and
hanger only
p Top back cover
Blackout options
p Side channels
p Sill angle
Specify
control
For standalone systems:
Keypad style:
p Architectural
p Designer
Keypad configuration
(refer to pg. 72):
p Open/close
p Raise/Lower
p Preset 1
p Preset 2
p Preset 3
p IR receiver
p Dual shade control
Color (refer to pg. 71)
p Plastic
color________________
p Metal
finish________________
p Infra-red transmitter
p Dry contact input from
third-party systems
For total lighting control:
p GRAFIK Eye® (room control)
p HomeWorks®
(whole home control)
p RadioRA®
(whole home control)
p GRAFIK® systems
(total building control)
p QuantumTM
(PC-based control)
|
Lutron 11
Sivoia QED
®
| roller shade overview
roller 225™
roller 100™ and roller 200CW
roller 64™
roller 20™
Actual size
tube sizes
roller 20
roller 64
roller 100, roller 200CW
roller 225
roller 20 - page 14
A slim profile and narrow width ideal for shallow
residential window frames
Tube Size: 1.25 in. (32 mm) diameter
Pocket size: 3.5 in. w x 3.5 in. h (89 mm w x 89 mm h)
Typical maximum size*: 20 sq. ft. (1.86 sq. m)
Minimum bracket-to-bracket width: 18.5 in. (470 mm)
Maximum bracket-to-bracket width*: 8 ft. (2438 mm)
roller 64 - page 16
Ideal for small- to medium-sized windows
Tube Size: 1.625 in. (41 mm) diameter
Pocket size: 3.5 in. w x 3.5 in. h (89 mm w x 89 mm h)
Typical maximum size*: 64 sq. ft. (5.95 sq. m)
Minimum bracket-to-bracket width: 18.5 in. (470 mm)
Maximum bracket-to-bracket width*: 8 ft. (2438 mm)
|
12 Lutron
*Larger shades may be available based on fabric selection. Contact customer
service or use SCT for actual shade dimensions based on fabric type.
roller 100™ - page 18
Designed for windows approximately 10 ft. (3048 mm) wide
Tube size: 2.56 in. (65 mm) diameter
Pocket size: 4.75 in. w x 5.0 in. h (121 mm w x 127 mm h)
Typical maximum size: 100 sq. ft. (9.29 sq. m)
Minimum bracket-to-bracket width: 24 in. (610 mm)
Maximum bracket-to-bracket width*: 10 ft. (3048 mm)
roller 200CW - page 28
Features gradual movement for large shades and
coupling capability for up to 6 fabric panels
Tube size: 2.56 in. (65 mm) diameter
Pocket size: 4.75 in. w x 5.0 in. h (121 mm w x 127 mm h)
Typical maximum system size*: 200 sq. ft. (18.6 sq. m)
(up to 6 shades, 200 sq. ft. total)
Minimum bracket-to-bracket width: 25 in. (635 mm)
roller 225™ - page 24
Provides a heavy-duty bracket and higher torque for much
larger applications such as atriums or multi-story windows
Tube size: 3.75 in. (95 mm) diameter
Pocket size: 7 in. w x 7 in. h (178 mm w x 178 mm h)
Typical maximum size*: 225 sq. ft. (20.9 sq. m)
Minimum bracket-to-bracket width: 31.75 in. (806 mm)
Maximum bracket-to-bracket width*: 15 ft. (4572 mm)
*Larger shades may be available based on fabric selection. Contact customer service
or use SCT for actual shade dimensions based on fabric type.
|
Lutron 13
|
|
roller 20™ dimensions
roller 20 brackets
Universal bracket design
•
One-piece bracket for simple installation
- Same bracket for left and right side of roller tube
- Same bracket for ceiling, wall, and jamb mount
•
Roller tube installs with simple,
spring-loaded design
System dimensions
The roller 20 system utilizes a 1.25 in.
(32 mm) roller tube to operate up to
20 sq. ft (1.86 sq. m) of fabric.*
A
B
Front view
E
Dual-mount roller system
Install two fabric panels over the same
window with this compact bracket.
F
J
H
D
C
G
K
Dimensions
glass side
0.75 in. (19 mm) symmetrical, minimum
18.5 in. (470 mm) minimum
2.5 in. (64 mm)
0.18 in. (5 mm) minimum
1.65 in. (42 mm)
1.25 in. (32 mm)
|
14 Lutron
I
Dimensions
5.15 in. (131 mm)
3.5 in. (89 mm)
6 in. (152 mm)
5.5 in. (140 mm)
1.0 in. (25 mm)
*Wider shades may be available based on fabric selection. Contact customer
service or use SCT for actual shade dimensions based on fabric type.
|
|
roller 20™ fascia and pockets
roller 20 blackout
Standard end cap
Provide a clean look for a system
installed without fascia or top box.
Available in white
Blackout configuration
Lutron® offers side channels in a width of 2.5 in.
(64 mm) to facilitate blackout conditions.
L
L
Fascia
Sivoia QED® roller 20 can be installed with a
top/back cover and fascia for a clean, minimal look.
Square and curved fascia are available in white,
bronze, and anodized aluminum.
Side view
Square fascia
Round fascia
top back cover
N
M
Front view
N
Dimensions
3.5 in. (89 mm)
M 1.0 in. (25 mm)
2.5 in. (64 mm)
glass side
Fascia end caps
2.75 in.
2.75 in.
2.75 in.
2.5 in.
(64 mm)
2.5 in.
(64 mm)
2.75 in.
5.0 in. (127 mm)
Pocket dimensions
Sivoia QED roller 20 will never require more than
3.5 in. height x 3.5 in. (89 mm x 89 mm) depth
for installation.
1 in.
(25 mm)
Optional side
channel
L
Fabric
Sill angle
Install side
channels backto-back at wide
center mullions.
The sill angle
completes
the blackout by
stopping light leaks
below the shade.
Sill
L
Side view
ceiling
glass
|
Lutron 15
|
roller 64™ dimensions
|
roller 64 brackets
Universal bracket design
•
One-piece bracket for simple installation
- Same bracket for left and right side of roller tube
- Same bracket for ceiling, wall, and jamb mount
•
Roller tube installs with simple,
spring-loaded design
System dimensions
The roller 64 system utilizes a 1.67 in.
(42 mm) roller tube to operate up to
64 sq. ft (5.95 sq. m) of fabric.*
A
B
Front view
D
E
Top view
Dual-mount roller system
Install two fabric panels over the same window
with this compact bracket system.
F
J
G
D
C
I
Dimensions
K
0.75 in. (19 mm) symmetrical, minimum
18.5 in. (470 mm) minimum
3.0 in. (76 mm) maximum
Dimensions
6.0 in. (152 mm)
0.26 in. (7 mm) minimum
7.0 in. (178 mm)
2.17 in. (55 mm)
6.25 in. (159 mm)
1.67 in. (42 mm)
3.9 in. (99 mm)
|
16 Lutron
H
glass
*Wider shades may be available based on fabric selection. Contact customer
service or use SCT for actual shade dimensions based on fabric type.
|
|
roller 64™ fascia and pockets
roller 64 blackout
Standard end cap
Provide a clean look for a system
installed without fascia or top box.
Available in white
Blackout configuration
Lutron® offers side channels in a width of 2.5 in.
(64 mm) to facilitate blackout conditions.
K
K
Fascia
Sivoia QED® roller 64 can be installed with a
top/back cover and fascia for a clean, minimal look.
Square and curved fascia are available in white,
bronze, and anodized aluminum.
Side view
Square fascia
Round fascia
top back cover
top back cover
M
L
Front view
M
Dimensions
3.45 in. (88 mm)
1 in. (25 mm)
M 2.5 in. (64 mm)
glass
Fascia end caps
2.5 in.
(64 mm)
2.5 in.
(64 mm)
5.0 in. (127 mm)
Pocket dimensions
Sivoia QED roller 64 will never require more than
3.5 in. height x 3.5 in. depth (89 mm x 89 mm)
for installation.
1 in.
(25 mm)
Optional side
channel
K
Fabric
Sill angle
Install side
channels backto-back at wide
center mullions.
The sill angle
completes
the blackout by
stopping light leaks
below the shade.
Sill
K
Side view
ceiling
glass
|
Lutron 17
|
roller 100™ dimensions
System dimensions
The roller 100 system utilizes a 2.5 in. (64 mm)
roller tube. The roller 100 operates up to
100 sq ft (9.29 sq. m) of fabric.*
|
roller 100 brackets
Bracket design benefits
Sivoia QED® roller 100 brackets employ a
two-piece design to maximize ease and
flexibility of installation.
Proprietary bracket designs for various
applications include:
• Wall mount
•
Ceiling mount
• Jamb mount
A
B
Wall mount
Front view
C
D
Top view
Ceiling mount
E
C
Jamb mount
Dimensions
0.75 in. (19 mm) symmetrical, minimum
24 in. (610 mm) (minimum bracket-to bracket)
4 in. (102 mm) maximum
4.43 in. (112 mm)
0.62 in. (16 mm) maximum projection
|
18 Lutron
*Wider shades may be available based on fabric selection. Contact customer
service or use SCT for actual shade dimensions based on fabric type.
Dimensions
Wall mount
F
G
4.43 in. (112 mm)
5.1 in. (130 mm) maximum
Note: shown
as regular roll
Ceiling mount
Dimensions
H
I
J
L
4 in. (102 mm) maximum
3.29 in. (84 mm)
0.15 in. (4 mm)
5.2 in. (132 mm) maximum
4.4 in. (112 mm)
K
Jamb mount
M
Dimensions
M 5.12 in. (130 mm) maximum
O
4.44 in. (113 mm)
4.65 in. (118 mm) maximum
Note:
Fabric projection adjustable 0.5 in. (13 mm)
|
Lutron 19
|
roller 100™ bracket features
Shade centering and leveling
A benefit of the two-piece bracket design is the
ability to laterally adjust the roller shade after
installation to ensure a centered mounting.
Roller shade can also be leveled easily without
re-mounting the bracket.
Dual-mount bracket
A common roller shade application is the
use of two fabrics on one window, typically
a sheer and a blackout. Fabric unrolls
closest to glass. The dual mount uses
a two-piece bracket.
T
P
Level
adjustment
S
Q
Lateral adjustment
Projection adjustment
The Sivoia QED® bracket allows for projection
adjustment of the roller tube during and
after installation.
R
Dimensions
P 6.5 in. (165 mm)
11 in. (279 mm)
R 1 in. (25 mm)
S 8.22 in. (209 mm)
T 7 in. (178 mm)
Projection
adjustment
screws
|
20 Lutron
Up to 0.5 in. (13 mm)
projection adjustment
glass
|
|
roller 100™ fascia and pockets
roller 100 pocket
Fascia and top back covers
Sivoia QED® roller shades can be installed within
fascia and top back covers. This two-piece
enclosure both conceals the product and affords
accessibility for adjustment and maintenance.
Pocket dimensions
Pockets are available for Sivoia QED roller 100
and roller 200CW systems. The pocket mount
uses a two-piece bracket.
Add side channels and sill angles to achieve
blackout conditions with opaque fabrics.
Fascia
Top back cover
Optional
end cap
V
Fascia and top/back cover with
side channel and sill angle (pg. 22)
W
The fascia mount uses a two-piece bracket.
U
ceiling
glass
U
Lutron® pocket dimensions
T
V 4.75 in. (121 mm)
W
T 5 in. (127 mm)
Dimensions
U
T 4.18 in. (106 mm)
|
Lutron 21
|
|
roller 100 coupling system
roller 100™ blackout
Blackout configuration
Lutron® offers side channels in a width of 2.5 in.
(64 mm) to facilitate blackout conditions.
Coupled roller system
Up to three Sivoia QED® roller 100 shade
panels can be coupled, meaning they all are
powered by a single electronic drive unit (EDU).
S
H
T
Side view
V
U
Front view
V
Dimensions
S 4.75 in. (121 mm)
Pocket dimensions
shown including
side channels
T 5 in. (127 mm
T 1 in. (25 mm)
U
V 2.5 in. (64 mm)
T
2.5 in.
(64 mm)
2.5 in.
(64 mm)
5.0 in. (127 mm)
1 in.
(25 mm)
Optional side
channel
Fabric
Sill angle
Sill
Side view
|
22 Lutron
Install side
channels backto-back at wide
center mullions
The sill angle
completes
the blackout by
stopping light leaks
below the shade.
Increased efficiency by operating multiple shades
with one EDU
•
Offers 1.5 in. (38 mm) minimum light gap
between panels
•
Can be assembled with any bracket configuration
(see pg. 23)
•
Offers phase adjustment, which allows the
bottom bars to be aligned after installation
•
Allows precise hembar alignment
(within 0.125 in. [3 mm])
•
Coupling adjustment
Use a screwdriver to align bottom bars while
shades are in place.
Coupling sub-brackets
Wall mount coupling sub-bracket
Fascia mount coupling sub-bracket
A
F
B
G
Dimensions
5.2 in. (132 mm)
3 in. (76 mm)
Dimensions
Ceiling mount coupling sub-bracket
A
6.14 in. (156 mm)
4.05 in. (103 mm)
Pocket mount coupling sub-bracket
C
H
glass side
Dimensions
5.2 in. (132 mm)
3.08 in. (78 mm)
I
Jamb mount coupling sub-bracket
D
Dimensions
8.48 in. (215 mm)
4.17 in. (106 mm)
E
Dimensions
6.63 in. (168 mm)
4.22 in. (107 mm)
|
Lutron 23
|
|
roller 225™ dimensions
System dimensions
The roller 225 provides a heavy-duty bracket
and higher torque for much larger applications
such as atriums or multi-story windows.
roller 225 brackets
The roller 225 system:
• Utilizes a 3.75 in. (95 mm) diameter tube
•
Employs heavy duty brackets designed for
larger systems
A
B
Front view
Sivoia QED®
roller 225
bracket assembly
C
C
Top view
C
D
E
Dimensions
0.75 in. (19 mm) symmetrical, minimum
31.62 in. (803 mm) typical minimum
6 in. (152 mm)
1.13 in. (29 mm) maximum
projection into room
|
5.25 in. (133 mm)
24 Lutron
GLASS/ WALL SIDE
|
|
roller 225™ pockets
roller 225 blackout
Pocket installation
Lutron® recommends a 7 in. x 7 in.
(178 mm x 178 mm) pocket for
recessed installations.
Blackout configuration (pocket only)
Lutron offers side channels in a width of
2.5 in. to facilitate blackout conditions.
G
F
H
G
Side view
F
I
H
Front view
I
Dimensions
glass
Dimensions
7 in. (178 mm)
1 in. (25 mm)
2.5 in. (64 mm)
Pocket dimensions
shown including
side channels.
7 in. (178 mm)
2.5 in.
(64 mm)
2.5 in.
(64 mm)
5.0 in. (127 mm)
Install side
channels backto-back at wide
center mullions.
1 in.
(25 mm)
Optional side
channel
Fabric
Sill angle
The sill angle
completes
the blackout by
stopping light leaks
below the shade.
Sill
Side view
|
Lutron 25
|
roller 200CW dimensions
System dimensions
The roller 200CW system utilizes a 2.56 in.
(64 mm) roller tube. The roller 200CW operates
200 sq ft (18.6 sq. m) of fabric. Shades move
slowly and are best suited for open
office spaces or common areas.
A
B
|
roller 200CW brackets
Bracket design benefits
Sivoia QED® roller 200CW brackets employ
a two-piece design to maximize ease and
flexibility of installation.
Proprietary bracket designs for various
applications include:
• Wall mount
•
Ceiling mount
• Jamb mount
Wall mount
Front view
C
D
Top view
Ceiling mount
E
C
Dimensions
0.75 in. (19 mm)
25 in. (635 mm) minimum bracket-to-bracket
4 in. (102 mm)
4.4 in. (112 mm)
1 in. (25 mm) maximum projection into room
|
26 Lutron
Jamb mount
|
Brackets
roller 200CW bracket feature
Wall mount
Shade centering and leveling
A benefit of the two-piece bracket design is the
ability to laterally adjust the roller shade after
installation to ensure a centered mounting.
Roller shade can also be leveled easily without
re-mounting the bracket.
F
G
Dimensions
4.43 in. (112 mm)
5.1 in. (130 mm)
Note: shown
as regular roll
Level
adjustment
H
Ceiling mount
I
J
Dimensions
4 in. (102 mm)
3.29 in. (89 mm)
0.15 in. (4 mm)
5.2 in. (132 mm)
4.4 in. (111 mm)
Lateral adjustment
L
K
Projection adjustment
The Sivoia QED® bracket allows for projection
adjustment of the roller tube during and
after installation.
Jamb mount
M
Dimensions
M 5.1 in. (130 mm)
4.44 in. (113 mm)
4.65 in. (118 mm)
O
Projection
adjustment
screws
Up to 0.5 in.
(13 mm) projection
adjustment.
Note:
Fabric projection adjustable 0.5 in. (13 mm)
|
Lutron 27
|
roller 200CW fascia and pockets
Fascia and top back covers
Sivoia QED® roller shades can be installed within
fascia and top back covers. This two-piece
enclosure both conceals the product and affords
accessibility for adjustment and maintenance.
Pocket dimensions
Pockets are available for Sivoia QED
roller 100TM and roller 200CW systems.
O
Add side channels and sill angles to achieve
blackout conditions with opaque fabrics.
P
Fascia
Top back cover
Optional
end cap
ceiling
glass
Dimensions
4.75 in. (121 mm)
P 5 in. (127 mm)
Fascia and top/back cover with
side channel and sill angle (pg. 29)
The fascia mount uses a two-piece bracket.
U
U
Dimensions
S 4.2 in. (107 mm)
|
28 Lutron
|
|
roller 200CW blackout
roller 200CW coupling system
Blackout configuration
Lutron® offers side channels in a width of 2.5 in.
(64 mm) to facilitate blackout conditions.
Coupled roller system
Up to six Sivoia QED® roller 200CW shade
panels can be coupled, meaning they all are
powered by a single electronic drive unit (EDU).
O
electronic drive unit
H
P
Side view
R
Q
Front view
Dimensions
4.75 in. (121 mm)
P 5 in. (127 mm)
1 in. (25 mm)
R
Pocket dimensions
shown including
side channels
R 2.5 in. (64 mm)
2.5 in.
(64 mm)
2.5 in.
(64 mm)
Install side
channels backto-back at wide
center mullions
5.00 in. (127 mm)
Optional side
channel
Fabric
Sill angle
Sill
Side view
The sill angle
completes
the blackout by
stopping light leaks
below the shade.
coupling shaft (highlighted in grey)
Increased efficiency by operating multiple shades
with one EDU
•
Control up to 200 sq ft (18.6 sq. m) of fabric
•
System installs in 4.75 in. x 5 in.
(121 mm x 127 mm) pocket
•
Symmetrical fabric gaps
•
Offers 1.5 in. (38 mm) minimum light gap
between panels
•
Can be assembled with any bracket configuration
•
Offers phase adjustment, which allows the
bottom bars to be aligned after installation
•
Allows precise hembar alignment
(within 0.125 in. [3 mm])
•
See pg. 23 for coupling
sub-bracket dimensions.
|
Lutron 29
|
the challenge effective daylight management
Interior daylight can be generated by direct
sunlight, reflection from clouds, surrounding
buildings, and/or light colored interior walls.
Daylight management is the use of shading
systems to regulate the penetration and
intensity of natural light into a space.
Applying the proper shading system
Controlling daylight requires a well-engineered
shading system. The system consists of a
controllable shade combined with the proper
fabric for attenuating light penetration while
preserving exterior views and controlling heat
gain. Controllable shades allow a system to be
automated and integrated into other building
control systems.
without shades
Fabric selection is determined by evaluating the
orientation of each elevation and the designer’s
objectives for the building’s interior. Factors include
the fabric’s ability to absorb, transmit, and reflect
solar energy.
For each fabric, Ts + As + Rs = 100% of solar radiation
Daylight control is optimized when precision control and
the appropriate fabric are applied in conjunction with
electric lighting control, including dimming and
switching systems.
with shades
As
Ts
Rs
Ts (solar transmittance)
As (solar absorptance)
Rs (solar reflectance)
|
30 Lutron
Sivoia QED
®
| roller shade fabric selection
Select the right fabric for each application. Lutron® fabrics are grouped into
three categories: SheerShade®, Privacy, and Blackout. These provide
varying degrees of light control and functionality.
SheerShade - page 32
Fabrics feature open weaves, so sunlight is filtered while
preserving the view. SheerShade fabrics are measured by
“openness factor,” which describes the ratio of open space
to fabric yarn in a weave.
SheerShade DesignerTM fabrics provide more decorative weave
options, such as jacquards that resemble natural woven fabrics.
Privacy - page 45
These fabrics permit some light, but are not
open weaves, so the view is limited to shapes
and shadows.
Blackout - page 46
These fabrics prevent all light from passing through the material.
Blackout fabrics are often combined with special side channels,
top treatments, and other system components to ensure a
complete light seal.
To order a fabric selection binder, register to order at:
www.lutron.com/binders
|
Lutron 31
Sivoia QED
®
| SheerShade
®
roller shade fabrics
glare control
preserve view
• UV protection
•
|
SheerShade SheerLite™
NEW
•
Charcoal
HL-213-(X)*
S
Charcoal/Brown
SHL-211-(X)*
Charcoal/Gray
SHL-212-(X)*
Pearl/Gray
SHL-005-(X)*
Pearl/Oyster
SHL-002-(X)*
Pearl
SHL-001-(X)*
Openness factors: 3% 5%
Usable fabric roll width: 96 in. (2438 mm) (can be railroaded)
Composition:30% polyester
70% PVC
* X = desired openness factor
|
32 Lutron
Color samples shown are representations only. For detailed test information, solar performance, or to request
fabric samples, please call 1.800.446.1503 or visit www.lutron.com. All fabrics meet NFPA standards for flame
retardance. Availability subject to change without notice.
Sivoia QED
®
| SheerShade
®
roller shade fabrics
glare control
solar heat control
• UV protection
•
|
SheerShade Value Select 1
NEW
•
Charcoal/Brown
VS1-816-1
Slate/Gray
VS1-826-1
Pearl/Linen
VS1-802-1
Pearl
VS1-801-1
Linen/Gray
VS1-805-1
Openness factor: 1%
Usable fabric roll width: 96 in. (2438 mm) (can be railroaded)
Composition: 25% polyester
75% PVC
|
Lutron 33
Sivoia QED
®
| SheerShade
®
roller shade fabrics
glare control
preserve view
• UV protection
•
|
SheerShade Value Select 2
NEW
•
Charcoal
VS2-213-8
Charcoal/Brown
VS2-211-8
Charcoal/Gray
VS2-212-8
Gray/White
VS2-205-8
Beige/Gray
VS2-223-8
Beige/White
VS2-202-8
Pearl/Gray
VS2-221-8
Pearl/Beige
VS2-222-8
Pearl
VS2-201-8
Openness factor: 8%
Usable fabric roll width: 96 in. (2438 mm) (can be railroaded)
Composition:25% polyester
75% PVC
|
34 Lutron
Color samples shown are representations only. For detailed test information, solar performance, or to request
fabric samples, please call 1.800.446.1503 or visit www.lutron.com. All fabrics meet NFPA standards for flame
retardance. Availability subject to change without notice.
Sivoia QED
®
| SheerShade
|
SheerShade Value Select 3
®
roller shade fabrics
glare control
•
preserve view
•
NEW
UV protection
dual sided
•
•
Oyster/Charcoal
VS3-413-3
Oyster/Bronze
VS3-411-3
Oyster/Gray
VS3-412-3
Oyster/Pearl Gray
VS3-405-3
Oyster/Beige
VS3-402-3
Oyster
VS3-401-3
Openness factor: 3%
Usable fabric roll width: 96 in. (2438 mm) (cannot be railroaded)
Composition: 25% polyester
75% PVC
D
ual sided: For many applications, the ideal SheerShade fabric
combines the view-preserving quality of a dark shade material
(facing inside) with the solar reflective property of a light shade
material (facing exterior).
Dual-sided fabrics also provide the opportunity for variation of
interior colors while providing a consistent look to the exterior.
|
Lutron 35
Sivoia QED
®
| SheerShade
®
roller shade fabrics
glare control
preserve view
• UV protection
•
|
SheerShade SheerNature™
•
Charcoal
SN440-C-3
Gray
SN441-G-3
Pearl
SN349-P-3
Silver
SN348-S-3
Sand
SN410-SA-3
Linen
SN319-L-3
White (Blanc)
SN119-W-3
Openness factor: 3%
Usable fabric roll width: 69 in. (1753 mm) (cannot be railroaded)
Composition: 80% fiberglass
20% PVC-free coating
PVC-free
Halogen-free
|
36 Lutron
Color samples shown are representations only. For detailed test information, solar performance, or to request
fabric samples, please call 1.800.446.1503 or visit www.lutron.com. All fabrics meet NFPA standards for flame
retardance. Availability subject to change without notice.
Sivoia QED
®
| SheerShade
®
roller shade fabrics
glare control
preserve view
• UV protection
•
|
SheerShade Basketweave XL
•
Charcoal**
SXL-CC-(X)*
Charcoal/Bronze
SXL-CB-(X)*
Charcoal/Gray**
SXL-CG-(X)*
Pearl
SXL-PP-(X)*
Pearl/Linen
SXL-PL-(X)**
White/Pearl**
SXL-WP-(X)*
Linen**
SXL-LL-(X)*
White/Linen**
SXL-WL-(X)*
White**
SXL-WW-(X)*
Openness factors: 5% 10%
Usable fabric roll width: 96 in. (2438 mm) (can be railroaded)
Composition:
35% fiberglass yarn coated with 65% PVC
*X = desired openness factor
**Now, selected colors from this collection are available in 1% and 3% openness factors.
All nine colors are also available in factors of 5% and 10%. Apply the appropriately
open weave to any window while maintaining aesthetic consistency.
|
Lutron 37
Sivoia QED
®
| SheerShade
®
roller shade fabrics
glare control
preserve view
• UV protection
•
|
SheerShade Basketweave 90
•
Charcoal
SV21-90-(X)*
Charcoal/Chestnut
SV24-90-(X)*
Charcoal/Gray
SV22-90-(X)*
Pearl/Gray
SV20-90-(X)*
Beige/Pearl Gray
SQ21-90-(X)*
Oyster/Pearl Gray
SP14-90-(X)*
Beige
SQ20-90-(X)*
Oyster/Beige
SP13-90-(X)*
Oyster
SP12-90-(X)*
Openness factors: 3% 5% 10%
Usable fabric roll width: 96 in. (2438 mm) (can be railroaded)
Composition:35% fiberglass yarn coated with 65% PVC
*X = desired openness factor
|
38 Lutron
Color samples shown are representations only. For detailed test information, solar performance, or to request
fabric samples, please call 1.800.446.1503 or visit www.lutron.com. All fabrics meet NFPA standards for flame
retardance. Availability subject to change without notice.
Sivoia QED
®
| SheerShade
®
roller shade fabrics
glare control
preserve view
• UV protection
•
|
SheerShade Basketweave 4000
•
Ebony
SV10-4K-(X)*
Tobacco
SQ16-4K-(X)*
Ash
SV15-4K-(X)*
Pewter
SV07-4K-(X)*
Graystone
SQ15-4K-(X)*
Granite
SP10-4K-(X)*
Pebblestone
SQ12-4K-(X)*
Alabaster
SP07-4K-(X)*
Chalk
SP06-4K-(X)*
Openness factors: 3% 5% 10%
Usable fabric roll width: 96 in. (2438 mm) (can be railroaded)
Composition:25% polyester, 75% vinyl on polyester
*X = desired openness factor
|
Lutron 39
Sivoia QED
®
| SheerShade
®
roller shade fabrics
glare control
•
preserve view
•
|
SheerShade Basketweave XL2
White/Charcoal
SXL2-WC-(X)*
White/Bronze
SXL2-WB-(X)*
White/Gray
SXL2-WG-(X)*
White/Pearl
SXL2-WP-(X)*
White/Linen
SXL2-WL-(X)*
White
SXL2-WW-(X)*
solar heat control
UV protection
• dual sided
•
•
dual-sided
Openness factors:
3% 5% 10%
Usable fabric roll width:96 in. (2438 mm) (cannot be railroaded)
Composition:35% fiberglass yarn coated with 65% PVC
*X = desired openness factor
D
ual sided: For many applications, the ideal SheerShade fabric
combines the view-preserving quality of a dark shade material
(facing inside) with the solar reflective property of a light shade
material (facing exterior).
Dual-sided fabrics also provide the opportunity for variation of
interior colors while providing a consistent look to the exterior.
|
40 Lutron
Color samples shown are representations only. For detailed test information, solar performance, or to request
fabric samples, please call 1.800.446.1503 or visit www.lutron.com. All fabrics meet NFPA standards for flame
retardance. Availability subject to change without notice.
Sivoia QED
®
| SheerShade
®
roller shade fabrics
solar heat control
UV protection
|
•
SheerShade Basketweave
Gray
PV16-48-1
Openness factor: Usable fabric roll width:
Composition:
•
Alabaster
PP07-48-1
1%
94 in. (2388 mm) (can be railroaded)
24% polyester, 76% vinyl on polyester
|
Lutron 41
Sivoia QED
®
| SheerShade
®
roller shade fabrics
solar heat control
UV protection
• light diffusion/no view
•
|
SheerShade Translucent 1277
•
Gray 9744
P7-9744-1
Beige 816
P7-816-1
Cream
P7-311-1
White
P7-200-1
Beige 718
P7-718-1
Openness factor: 1%
Fabric roll width:70 in. (1778 mm) (can be railroaded)
Composition:80% fiberglass
20% PVC-free coating
Additional colors available by special order.
Consult www.lutron.com or the SCT software.
PVC-free
Halogen-free
PVC-free
Halogen-free
|
42 Lutron
Color samples shown are representations only. For detailed test information, solar performance, or to request
fabric samples, please call 1.800.446.1503 or visit www.lutron.com. All fabrics meet NFPA standards for flame
retardance. Availability subject to change without notice.
Sivoia QED
®
| SheerShade
®
Designer™ roller shade fabrics
glare control
preserve view
• UV protection
•
|
SheerShade Designer Trevira CS
Gray
SD-7103-T
•
Wheat
SD-7104-T
Pewter
SD-7102-T
Bone
SD-7101-T
Openess factor: >10%
Usable fabric roll width:80 in. (2032 mm) (cannot be railroaded)
Composition:
100% polyester PLF
Inherently fire-retardant - meets fire standards in all countries.
PVC-free
Halogen-free
|
Lutron 43
Sivoia QED
®
| SheerShade
®
Designer™ roller shade fabrics
glare control
preserve view
• UV protection
•
|
SheerShade Designer Jacquard
•
Wicker/Mushroom
SD51-5K-5
Bark/Tiger Oak
SD50-5K-5
Marble/Sand
SD43-5K-5
Moire/Mocha
SD47-5K-7
Marble/Slate
SD52-5K-7
Moire/Leather
SD45-5K-7
Bamboo/Wheat
SD46-5K-7
Rattan/Umber
SD49-5K-7
Bark/Cedar
SD48-5K-10
Honeycomb/
Brown Sugar
SD53-5K-10
Bamboo/Birch
SD60-5K-10
Bamboo/
Whitewash
SD59-5K-10
Openness factors: 5% - 10% (varies by color)
Usable fabric roll width:
96 in. (2438 mm) (cannot be railroaded)
Composition:polyester with vinyl (% varies by color, some colors include acrylic.
See www.lutron.com)
|
44 Lutron
Color samples shown are representations only. For detailed test information, solar performance, or to request
fabric samples, please call 1.800.446.1503 or visit www.lutron.com. All fabrics meet NFPA standards for flame
retardance. Availability subject to change without notice.
Sivoia QED
®
| privacy roller shade fabrics
solar heat control
UV protection
• light diffusion/no view
•
|
Privacy Obion
•
Chartreux
P608-TL
Mississippi
P618-TL
Sahel
P623-TL
White (Blanc)
P600-TL
<1%
Openness factor: Usable fabric roll width:76 in. (1930 mm) (can be railroaded)
Composition:72% fiberglass
28% acrylic with cotton flocked backing
PVC-free
|
Lutron 45
Sivoia QED
®
| blackout roller shade fabrics
solar heat control
UV protection
•
|
Blackout Value Premiere
•
Onyx
BP-V40-0
Graphite
BP-V39-0
Mushroom
BP-Q58-0
Canyon
BP-V41-0
Wheat
BP-Q57-0
Sand
BP-P64-0
Birch
BP-P63-0
White
BP-P62-0
Openness factor:
0%
Usable fabric roll width:92 in. (2337 mm) (can be railroaded)
Composition: 100% polyester with white acrylic foamed backing
PVC-free
|
46 Lutron
Color samples shown are representations only. For detailed test information, solar performance, or to request
fabric samples, please call 1.800.446.1503 or visit www.lutron.com. All fabrics meet NFPA standards for flame
retardance. Availability subject to change without notice.
Sivoia QED
®
| blackout roller shade fabrics
solar heat control
UV protection
|
•
Blackout Premiere
•
Black (Noir)
BM-606-0
Cuivre
BM-615-0
Loutre
BM-609-0
Chartreux
BM-608-0
Angora
BM-626-0
Beige
BM-603-0
Mississippi
BM-618-0
Sahel
BM-623-0
Coraline
BM-625-0
White (Blanc)
BM-600-0
Openness factor: 0%
Usable fabric roll width: 76 in. (1930 mm) (can be railroaded)
Composition:42% fiberglass
51% acrylic
7% cotton light-colored flocked backing (white)
PVC-free
|
Lutron 47
Sivoia QED
®
| blackout roller shade fabrics
|
•
Blackout Standard
•
solar heat control
UV protection
Black
BN-901-0
Gray
BN-902-0
Champagne
BN-905-0
Oyster
BN-904-0
Cream
BN-906-0
White
BN-903-0
Openness factor: 0%
Usable fabric roll width:70 in. (1778 mm) (can be railroaded)
Composition:25% fiberglass
75% PVC coating
Note: This blackout fabric is not dual-sided. Exterior-facing
side of fabric is identical in color to interior appearance.
|
48 Lutron
Color samples shown are representations only. For detailed test information, solar performance, or to request
fabric samples, please call 1.800.446.1503 or visit www.lutron.com. All fabrics meet NFPA standards for flame
retardance. Availability subject to change without notice.
Sivoia QED
®
| COM fabrics and custom printing
Non-standard fabrics and
customer’s own materials
In addition to the standard offerings, Lutron® provides many
other fabrics, as well as custom colors and wider roll widths of
certain fabrics.
Sivoia QED roller shades can also use a customer’s own
materials (COM). All COM fabrics must be evaluated to
ensure proper performance. Contact Window Systems
Quotes Team for more information.
Custom printing
Choose from a variety of designs to accent your roller shades.
Lutron provides a selection of designs that can be printed on
select SheerShade®, privacy, and blackout fabrics.
Designs include exclusive reproductions of Frank Lloyd Wright®
leaded-glass windows, as well as Abstract Expressionist, and
Toile designs.
Custom printing is also available. Contact Lutron Window
Systems Quotes Team for details.
Frank Lloyd Wright “Tree of Life”
Frank Lloyd Wright “Parade”
Abstract Expressionist
|
Lutron 49
Sivoia QED
®
| bottom bar options
The Architectural Bottom Bar offers a clean aesthetic at the
bottom of Lutron® shades with no visible welding seam. It is
available in three options; full-wrap, half-wrap, and exposed.
Facing room
Half-wrap bottom bar
The half-wrap option is ideal for dual-sided fabrics with different
colors on each side.
Full-wrap bottom bar
The full-wrap option is recommended for fabrics with the same
coloring on both sides of the shade.
Half wrap
Exposed bottom bar
The exposed option offers the ability to coordinate the bottom
bar color with the fabric and match window mullions.
Wool pile
Light-blocking wool pile is available with the half-wrap and
exposed bottom bar options for blackout shades used with
side channels.
Full wrap
Color choices for the bottom bars are available on half-wrap
and exposed bars:
Exposed
Anodized
aluminum
White
Bronze
Endcap colors coordinate with the exposed bottom bar color, or
with the fabric on both half- and full-wrap bars. The endcap colors
are shown below.
Gray
White
Bronze
Black
Sealed battens
For shades that are very wide, horizontal battens can be sealed into
the fabric to provide stability and help ensure the best performance.
|
50 Lutron
Sealed batten
Facing glass
Sivoia QED
®
| drapery track
|
Lutron 51
Sivoia QED
®
| drapery track system selection guide
Determine how
drapery track
will be installed
Mounting conditions
p Wall mount
Take
system
measurements
Determine
capacity
Track length (inches)
= __________________
p Ceiling mount
Track shape (pg. 60)
p Straight
p Curve
*Estimated opening
size is approximately 2/3 of
length of track
left or right stack
system width
**Estimated stack back is
approximately 1/3 of length
of
track
left or right stack
each stack
= approx 1/6
(system width)
stack= approx 1/3
(system width)
Track type (pg. 57)
system width
Left or right
stack
p Single
p Dual
p Tandem
stack =
approx.
1/3
stack= approx
1/3
(system width)
system
width
p Dual/Tandem
Draw type
p Center draw
left or right stack
pR
ight draw
pL
eft draw
Drive side
system width
stack= approx 1/3
(system width)
split-draw center stack
system width
Split-draw
center stack
each stack
= approx 1/6
(system width)
pR
ight
pL
eft
* Drive is field mountable
and drive side can be
reconfigured on site
each stack = approx.
1/6 system width
***Refer to Shade Configuration
Tool (SCT) for exact opening
size and stack back
|
52 Lutron
System measurements
will determine required
drapery capacity
split-draw center stack
system width
p Bend
Drapery weight (lbs.)
= __________________
System capacity*
p Standard capacity (105 lbs.)
p High capacity (150 lbs.)
(available
split-draw
center stack summer 2008)
system width
* Capacities required depend
upon drape
weight, track shape
each stack
= approx 1/6
(bend(system
radius),
and track length
width)
Sivoia QED
®
| drapery track system selection guide
Specify
track requirements
Pleat style
p Pinch pleat
p Ripplefold
Fullness
(Ripplefold only)
p 80%
p 100%
p 120%
Specify control
requirements
For standalone systems:
Keypad style:
p Architectural
p Designer
Keypad configuration
(refer to pg. 72):
p Open/close
p Preset 1
p Preset 2
p Preset 3
Track metal color
p Raise/Lower
p Bronze
p IR receiver
p Clear anodized
p Dual shade control
p White
p Custom __________________
Color (refer to pg. 71)
p Plastic
color______________________
p Metal
finish______________________
p Infra-red receiver
p Input from third-party systems
For total lighting control:
p GRAFIK Eye® (room control)
p HomeWorks® (whole home control)
p RadioRA® (whole home control)
p GRAFIK® systems (total building control)
p QuantumTM (PC-based control)
|
Lutron 53
|
drapery track system overview
System overview
•
Provide privacy with elegant draperies of any
fabric and color (customer-supplied)
•
One-touch control of individual or groups of
draperies for fully-open, fully-closed, or
movement to preset positions
•
Integrates seamlessly with Sivoia QED roller
and Roman shades
•
Patented technology eliminates noise
in tracks
•
Left-draw, right-draw, split-draw and
curved systems available
Brackets
Sivoia QED curtain track systems can be
mounted to the wall or to the ceiling.
Wall mount bracket
4.25 to 6.75 in. (108 to 172 mm)
1.625 in.
(41 mm)
1.2 in.
(31 mm)
1.25 in.
(32 mm)
Ceiling mount bracket
2.06 in
(52 mm)
1.2 in.
(31 mm)
3.3 in
(84 mm)
8.88 in
(226 mm)
10.63 in.
(270 mm)
1.25 in.
(32 mm)
Ceiling mount bracket
exploded view
|
54 Lutron
|
drapery track mounting options
Straight track mounting options
Specify left draw, right draw, or center
draw drapery track options.
Track configuration
Track width (application dependent
18 ft. (5486 mm) max)
Left draw/left-mounted EDU
10.6 in.
(270 mm)
8.89 in.
(226 mm)
3.3 in. (84 mm)
Right draw/right-mounted EDU
Track width (application dependent
18 ft. (5486 mm) max)
Split-draw, left-or right-mounted EDU
Track width (application dependent
18 ft (5486 mm) max)
Tandem draw, left and right-mounted EDUs
Track width (application dependent
36 ft. (10.97 m) maximum
Note: Valance and drapery not included
|
Lutron 55
|
drapery track system installation
Single drapery track system
Maintain enough clearance between the drapery track and the inside face of
the top treatment or ceiling recess to allow the fabric to move freely.
Dimensions*
11.25 in. (286 mm)
3.5 in. (89 mm)
2 in. (51 mm)
1 in. (25 mm)
(wall mount shown)
Dual drapery track system
Sivoia QED® drapery tracks can be used for a combination
sheer/blackout treatment.
Dimensions*
11.25 in. (286 mm)
3.5 in. (89 mm)
2 in. (51 mm)
1 in. (25 mm)
5.5 in. (140 mm)
(wall mount shown)
Single, tandem drapery track system
The accuracy of movement and speed control of the Sivoia QED
drapery track system allows two independent systems to be used
to create a center draw drape.
(wall mount shown)
Corner application
Sivoia QED drapery tracks can be used in corner applications.
* Measurements listed are minimums.
Note: Sivoia QED drapery tracks utilize an external EDU
|
56 Lutron
Dimensions*
11.25 in. (286 mm)
3.5 in. (76 mm)
2 in. (51 mm)
1 in. (25 mm)
|
drapery track curved
Sivoia QED® curved drapery track
In addition to straight tracks, Lutron® offers the ultra-quiet Sivoia QED drapery system
for curved applications. The system provides smooth movement, all preset capabilities,
and robust performance.
Curved tracks are available in a number of standard arcs as well as
custom specifications.
•
Split-draw and single-draw versions are available.
•
Up to 90° curves are possible. Curved radius to be greater than 20 in. (0.5 m).
Please contact customer service with specific applications.
•
|
Lutron 57
drapery track
| pinch pleat drapery panels
Pinch pleat | Drapery hook assembly
For best performance, use a drapery hook setting of
0.5 in. (13 mm) from top of drape. This allows the system
to operate with minimal noise.
Top of drapery panel
0.50 in
(13 mm)
Drapery fabric return
(pinch pleat drapery shown)
drapery panel
4.5 in (114 mm)
minimum for wall
mount bracket
9.5 in (241 mm)
minimum for dual
mount bracket
wall
|
58 Lutron
drapery track
| ripplefold drapery panels
Ripplefold | Drapery tape assembly
Top of tape = drapery panel top
|
Lutron 59
|
drapery track system capacity
Standard capacity - pinch pleat
Use this chart to determine the maximum drapery panel size the Sivoia QED®
drapery system can operate, based upon height and weight.
System width
Straight track
Curved track, 1 bend
24 in. to 32 in. (600 mm to 800 mm)
30 lbs (13.6 kg)
-
32 in. to 44 in. (800 mm to 1100 mm)
40 lbs (18.1 kg)
40 lbs (18.1 kg)
44 in. to 56 in. (1100 mm to 1400 mm)
55 lbs (24.9 kg)
30 lbs (13.6 kg)
56 in. to 68 in. (1400 mm to 1700 mm)
70 lbs (31.8 kg)
25 lbs (11.3 kg)
68 in. to 84 in. (1700 mm to 2134 mm)
85 lbs (38.6 kg)
25 lbs (11.3 kg)
84 in. to 132 in. (2134 mm to 3353 mm)
105 lbs (47.6 kg)
20 lbs (9.1 kg)
132 in. to 156 in. (3353 mm to 3962 mm)
90 lbs (40.8 kg)
20 lbs (9.1 kg)
156 in. to 216 in. (3962 mm to 5486 mm)
80 lbs (36.3 kg)
-
Standard capacity - ripplefold
Use this chart to determine the maximum drapery panel size the Sivoia QED
drapery system can operate, based upon height and weight.
|
System width
Straight track
24 in. to 32 in. (600 mm to 800 mm)
35 lbs (13.6 kg)
32 in. to 44 in. (800 mm to 1100 mm)
45 lbs (18.1 kg)
44 in. to 56 in. (1100 mm to 1400 mm)
60 lbs (24.9 kg)
56 in. to 68 in. (1400 mm to 1700 mm)
75 lbs (31.8 kg)
68 in. to 108 in. (1700 mm to 2743 mm)
90 lbs (38.6 kg)
108 in. to 156 in. (2743 mm to 3962 mm)
65 lbs (47.6 kg)
156 in. to 216 in. (3962 mm to 5486 mm)
10 lbs (4.5 kg) for 80%
10 lbs (4.5 kg) for 100%
n/a (capacity limit) for 120%
60 Lutron
Sivoia QED
®
| Designer Roman shades
|
Lutron 61
Sivoia QED
®
Determine how
roller shade
will be installed
p Inside mount
p Outside mount
p Wall mount
p Ceiling mount
| Designer Roman shades system selection guide
Take
system
measurements
Roller shade size =
system height ______ x
system width _______
Specify
drive location
for pre-wiring
p Left drive
p Right drive
p TBD
Operator required:
p roller 64TM
For shades up to
64 sq. ft. (5.95 sq. m)
Minimum width: 24 in. (610 mm)
Maximum width: 8 ft. (2400 mm)
Maximum height: 8 ft. (2400 mm)
p roller 100TM
For shades up to
100 sq. ft. (9.29 sq. m)
Minimum width: 24 in. (610 mm)
Maximum width: 10 ft. (3000 mm)
Maximum height: 10 ft. (3000 mm)
|
62 Lutron
Note: Maximum shade width may vary based on fabric selection. Contact customer
service or use SCT for actual shade dimensions based on fabric type.
Sivoia QED
®
Specify
shade style
Fabric type:
p Soft fabric
p Woven wood
Pleat style:
Soft fabric
p Cameron
soft fabric
uBois
p D
soft fabric
est End
p W
soft fabric
p Y
ork
soft fabric
Pleat style:
Woven wood
p Natural
woven pleat
| Designer Roman shades system selection guide
Specify
fabrics
Fabric selection,
edge binding,
lining/interlining
All fabric selections
available in fabric
selection guides:
367-1201: Woven
Woods Fabric
Selection Guide
367-1202: Soft Fabrics
Selection Guide
Specify top
treatments
Valance:
p Returns
p No returns
Specify
control
For standalone systems:
Keypad style:
p Architectural
p Designer
No valance:
p Hardware
covers
p No hardware
covers
Keypad configuration
(refer to pg. 72):
p Open/close
p Raise/Lower
p Preset 1
p Preset 2
p Preset 3
p IR receiver
p Dual shade control
Color (refer to pg. 71)
p Plastic
color________________
p Metal
finish________________
p Infra-red transmitter
p Input from
third-party systems
For total lighting control:
p GRAFIK Eye® (room control)
p HomeWorks®
(whole home control)
p RadioRA®
(whole home control)
p GRAFIK® systems
(total building control)
p QuantumTM
(PC-based control)
|
Lutron 63
Sivoia QED
®
| Designer Roman shades
Sivoia QED designer Roman shades
Sivoia QED shading has been dramatically expanded, now
offering a broad line of exquisite woven wood treatments as
well as an exclusive collection of soft fabrics specially designed
to complement Lutron® Satin Colors® lighting controls
and accessories.
Sivoia QED designer Roman shades offer the same precise,
quiet, elegant performance as Sivoia QED roller shades and
drapery track systems.
• Smooth, quiet movement
•
Precise alignment of shades to within 0.125 in. (3 mm)
• Programmable stopping points
•
Elegant keypads and handheld remotes for
increased convenience
• Simple, low-voltage installation
Roman shades in soft fabrics and woven woods
This exclusive line of fabrics and woven woods adds the perfect
touch to any interior. With many colors, patterns, styles, and
textures to choose from, this world-class collection is further
enhanced by Sivoia QED technology.
Now, stylish window coverings can operate with precise, near
silent elegance. Sivoia QED also allows integration with Lutron
lighting control systems for the ultimate combination of form
and function.
|
64 Lutron
|
Designer Roman shades style options
Soft fabrics pleat options
DuBois
A cascade design,
best with fabrics that
have minimal patterns
Cameron
A clean, modern,
formal pleat design
that works well with
most patterns
York
A simple, more
casual pleat structure
with no seams or
horizontal stitching
West End
A softer, draped
approach to Roman
shade pleats, ideal for
large scale or scenic
fabric patterns
Woven woods style options
Standard woven shade
•
Clean lines, hangs flat when
fully lowered
•
Fabric pleats are set between
5 in. and 9 in. (127 mm and
229 mm) heights, depending
on the material selected.
Standard woven shade
with valance
Add a valance to conceal
pleat panels when shade
is fully raised.
Standard woven shade
with edge binding
Note: Edge binding is not
compatible with all woven woods.
Check with
customer service to
determine compatibility.
|
Lutron 65
|
soft fabric shade specifications
Soft fabric shades
Styles
Max. width
Min. width
Max. height
Min. height
Operator types
Top treatment
Fabric selections
Lining selections
DuBois, Cameron, York, and West End
115 in. (2921 mm)
24 in. (610 mm) with Sivoia QED® drive
144 in. (3658 mm)
36 in. (914 mm)
Sivoia QED roller 64™/roller 100™ drive
Optional valance
97
19
Operator
Sivoia QED roller 64
Sivoia QED roller 100
Header size (depth)
2.5 in. (61 mm)
4.5 in. (114 mm)
Pleat options (back view)
DuBois
(soft pleats)
Cameron
(flat pleats)
York
Soft fabric lining
Standard lining in either white or ivory is included in the
price of a soft fabric shade. Interlining (in combination with
standard lining), blackout lining, specialty broadcloth lining,
specialty blackout lining, and specialty sheer lining are also
available at an additional charge.
|
66 Lutron
West End
|
soft fabrics shade dimensions
D
Headrail
E
Pleat spacing
B
B
Ring spacing
A
C
Bottom hem
C
Back view (DuBois shown)
Side view
DuBois
Cameron
York
West End
Ring spacing
5.75 in. (146 mm)
8.75 in. (222 mm)
10 in. (254 mm)
10 in. (254 mm)
Pleat spacing
5.75 in. (146 mm)
8.75 in. (222 mm)
Bottom hem
4.125 in. (105 mm) 4.625 in. (117 mm) 4.75 in. (121 mm)
4.75 in. (121 mm)
2.5 in. (64 mm)
2.5 in. (64 mm)
2.5 in. (64 mm)
2.5 in. (64 mm)
.75 in. (19 mm)
.75 in. (19 mm)
.75 in. (19 mm)
.75 in. (19 mm)
Ring spacing
5.75 in. (146 mm)
8.75 in. (222 mm)
10 in. (254 mm)
10 in. (254 mm)
Pleat spacing
5.75 in. (146 mm)
8.75 in. (222 mm)
Bottom hem
4.125 in. (105 mm) 4.625 in. (117 mm) 4.75 in. (121 mm)
4.75 in. (121 mm)
Headrail
(horizontal)
4.5 in. (114 mm)
4.5 in. (114 mm)
4.5 in. (114 mm)
4.5 in. (114 mm)
Headrail
(vertical)
.75 in (19 mm)
.75 in (19 mm)
.75 in (19 mm)
.75 in (19 mm)
Roller 64TM
Headrail
(horizontal)
Headrail
(vertical)
Roller 100TM
n/a
n/a
n/a
n/a
|
Lutron 67
|
natural woven woods shade specifications
Natural woven wood shades
Styles
Roman
Max. width
138 in. (3505 mm)
Min. width
24 in. (610 mm) with Sivoia QED drive
Max. height
180 in. (4572 mm)
Min. height
36 in. (914 mm)
Operator types
Sivoia QED roller 64™/roller 100™ drive
Top treatment
Optional valance
Fabric selections
31
Lining selections
3
Edge binding selections
6
Operator
Sivoia QED roller 64
Sivoia QED roller 100
Header size (depth)
2.5 in. (61 mm)
4.5 in. (114 mm)
Valance and binding options
woven woods pleat
woven woods pleat
with valance
Natural woven wood lining
Standard Natural Woven Wood shades do
not include fabric lining. However, blackout
and privacy linings are available at an
additional charge.
|
68 Lutron
woven woods pleat
with edge binding
woven woods pleat
with edge binding
and valance
Natural woven wood edge binding
Most Natural Woven Woods shade fabrics
are available with an optional edge binding.
Edge binding is approximately 1.75 in. (45 mm)
wide and is available in a choice of six colors.
Sivoia QED
®
| controls
|
Lutron 69
Lutron
®
| seeTouch
®
keypads
Elegant seeTouch keypads
complement any décor
Choose from several keypad styles
and over 40 colors and finishes
including metals.
Sivoia QED® keypads offer ergonomic,
backlit buttons for easy viewing in a
darkened room. Integrate with Lutron
lighting controls for total light control of
electric light and daylight.
Easy to use remote controls
Easily control one shade or a whole
group of shades with convenient
handheld remote controls.
Architectural, non-insert style
(not shown actual size)
|
70 Lutron
|
seeTouch keypads color options
®
designer gloss finish palette
(WH)White (IV) Ivory
(AL) Almond (LA) Light Almond (BR) Brown (GR) Gray
(BL) Black (WH)
(IV)
(AL)
(LA)
(BR)
(GR)
(BL)
(HT)
(MR)*
(PL)*
(TQ)*
(SG)*
(TP)
(ES)
(BI)
(SW)
(PD)*
(MN)
(SI)*
(TC)
(GB)*
(BG)*
(MS)*
(GS)*
(DS)
(ST)
(LS)
(WH)
(BE)
(IV)
(AL)*
(LA)*
(GR)
(SI)*
(BR)
(BL)
designer satin finish palette
(HT) Hot
(MR) Merlot*
(PL) Plum*
(TQ) Turquoise*
(SG) Sea Glass*
(TP) Taupe
(ES) Eggshell (BI) Biscuit
(SW) Snow (PD) Palladium*
(MN) Midnight
(SI) Sienna*
(TC) Terracotta
(GB) Greenbriar*
(BG) Bluestone*
(MS) Mocha Stone*
(GS) Goldstone* (DS) Desert Stone (ST) Stone
(LS) Limestone architectural matte finish palette
(WH) White (GR) Gray (BE) Beige
(TP) Taupe
(IV) Ivory
(SI) Sienna*
(AL) Almond* (BR) Brown (LA) Light Almond* (BL) Black (TP)
metal finishes palette
(SB) Satin Brass
(BB) Bright Brass
(BC) Bright Chrome
(CLA) Clear Anodized
Aluminum
(BLA)Black Anodized
Aluminum
(BRA)Brass Anodized
Aluminum
(QB) Antique Brass
(QZ) Antiq. Bronze
(SC) Satin Chrome
(SN) Satin Nickel
(BN) Bright Nickel
(AU) Gold
Color samples shown are representations only. See
product samples for exact finishes, and ask your
Lutron® sales representative for color availability.
standard
(SB)
anodized aluminum
(BB)
(BC)
(QZ)
(SC)
(CLA)
(BLA)
(BN)
(AU)
(BRA)
special
(QB)
(SN)
Stainless Steel
(SS)
(designer wallplates only)
* Note: Non-standard color offering. Contact Customer Service for additional information.
|
Lutron 71
|
seeTouch control options architectural style
®
Color and finish ordering sample: SQA-2(I/N)-XX-E01
Include I for insert style
Include N for non-insert style
Include color code (XX) to specify color/finish.
seeTouch
2.75 in. w x 4.625 in. h (70 mm x 118 mm)
SQA-2(I)-XX-E01
Two button keypad
insert style shown
SQA-3(N)-XX-E01
Three button keypad
non-insert style shown
SQA-2R(N)-XX-E01
Two button keypad
with raise/lower
SQA-3R(N)-XX-E01
Three button keypad
with raise/lower
SQA-4E(N)-XX-E01
Four button keypad
with raise/lower
and infrared reception
SQA-5R(N)-XX-E01
Five button keypad
with raise/lower
|
72 Lutron
SQA-2D(N)-XX-E01
Four button keypad
for dual shades or
two group applications
SQA-3D(N)-XX-E01
Six button keypad
for dual shades or
two group applications
SVQ-CCI-8
Sivoia QED®
contact closure
input board
Dimensions
Width:
with cover: 5.75 in. (146 mm)
without cover: 5.25 in. (127 mm)
SQA-2N-WH-E01
shown actual size
Architectural, non-insert
style shown
Height:
with cover: 10.75 in. (273 mm)
without cover: 10.25 in. (260 mm)
Depth: 2 in. (51mm)
|
Lutron 73
|
seeTouch control options designer style
®
Color and finish ordering sample: SQD-2I-XX-E01
Include color code (XX) to specify color/finish.
seeTouch
2.94 in. w x 4.69 in. h (75 mm x 119 mm)
Designer, insert style shown
SQD-2I-XX-E01
Two button keypad
SQD-3I-XX-E01
Three button keypad
SQD-2RI-XX-E01
Two button keypad
with raise/lower
SQD-3RI-XX-E01
Three button keypad
with raise/lower
SQD-4EI-XX-E01
Four button keypad
with raise/lower
and infrared receiver
SQD-5RI-XX-E01
Five button keypad
with raise/lower
|
74 Lutron
SQD-2DI-XX-E01
Four button keypad
for dual shade or
two group applications
SQD-3DI-XX-E01
Six button keypad
for dual shade or
two group applications
SQD-3I-WH-E01
shown actual size
Designer, insert style shown
|
Lutron 75
Sivoia QED
®
| Euro-style control options
Color and finish ordering sample: SQA-2N-XX-E01
Include color code (XX) to specify color/finish.
Euro-style keypads
3.39 in. w x 3.39 in. h (86 mm x 86 mm)
SQE-RLN-XX-E01
Two button keypad
SQE-2N-XX-E01
Two button keypad
SQE-RLN-WH-E01
shown actual size
SQE-3EN-XX-E01
Three button keypad
with raise/lower and
infrared reception
SQE-33N-XX-E01
Six button keypad for three
group applications
|
76 Lutron
SQE-3DN-XX-E01
Six button keypad for
dual mount or two
group applications
|
IR remote control
NEW
New infrared transmitters
Lutron® will introduce a newly expanded line of infrared
transmitters in summer 2008.
The line will feature the classic raise/lower transmitter,
as well as 3 new styles:
•
Classic single shade group control with
raise/lower functionality
•
Control of a single shade group with raise/lower
functionality and a “favorite” scene button for each group
•
Control of a dual shade and/or drape group with
raise/lower functionality and a “favorite” scene button
for each group
•
Control of a single shade group and a zone of lights with
a “favorite” scene button for each group
SVIT-SH-WH
(actual size)
|
Lutron 77
|
IR remote control
Four styles of infrared remote controls shown below
The newly expanded line of infrared transmitters gives users convenient control of single or
dual groups of window treatments, as well as control of light and shade groups in rooms with
integrated systems. The transmitters feature a clean and simple aesthetic that are intuitive for
all users. Engravings shown are standard — custom engraving is an available option.
Classic style
NEW
SVIT-WH (as shown)
•
Open, Close
•
Dimensions:
Width: 1.5 in. (38 mm)
Length: 4.6 in. (117 mm) Depth: 0.65 in. (17 mm)
NEW
Single shade group
Open, Close,
Favorite preset button
SVIT-SH-WH (as shown)
Shade
•
SVIT-DR-WH
Drape
•
2 shade groups
Group 1: Open, Close,
Favorite preset button
•
Group 2: Open, Close,
Favorite preset button
NEW
•
SVIT-SC-BL-WH (as shown)
Screen
•
Blackout
•
•
SVIT-SR-BL-WH
Sheer
•
Blackout
SVIT-GRX-SH-WH (as shown)
•
Lights (GRAFIK Eye lighting)
•
Shades (Sivoia shades)
•
SVIT-SH-DR-WH
Shade
•
Drape
•
SVIT-SH-DH-WH
Shade 1
•
Shade 2
•
(Custom marking available.)
|
SVIT-GRX-DR-WH
Lights (GRAFIK Eye® lighting)
•
Drapes (Sivoia® drapes)
•
•
78 Lutron
NEW
Shade and lighting control
Shades: Open, Close,
Favorite preset button
Lights: On, Off,
Favorite preset button
SVIT-MIR-SH-WH
Lights (Maestro® IR lighting)
•
Shades (Sivoia shades)
SVIT-MIR-DR-WH
Lights (Maestro® lighting)
•
Drapes (Sivoia drapes)
(Custom marking available.)
|
IR remote control
Convenience
Choose from a variety of hand-held remotes to control Sivoia QED® systems.
Sivoia QED electronic drive units offer built-in infrared reception.
SVQ-3PIT-WH
Three preset hand-held
infrared remote
•
Offers open/close, three
programmable presets and
fine-tune raise/lower control
•
Can control one shade or a
group of shades together
•
Dimensions:
Width: 1.5 in. (38 mm)
Length: 5.69 in. (145 mm)
Depth: 0.88 in. (22 mm)
SV-IR-XX
Remote infrared eye for Sivoia QED
•
Receives remote IR signal from any Sivoia QED
handheld infrared remote controls
•
Available in white (WH) or royal plum (RP)
SV-IR-EXT-10
10 ft. (3 m) extension piece
•
5 extensions maximum
|
Lutron 79
|
Lutron dimmers seamless coordination
®
Complement your design using the colors of Lutron for a coordinated look
throughout your space. Lutron dimmers and accessories come in a variety of styles
and finishes and add ambiance, convenience, and energy savings. Refer to pg. 71
for samples of our color palettes.
Lutron dimmers
Available in Designer Gloss or Satin Colors® finishes:
Maestro®
Diva®
LyneoTM LX
AbellaTM
CeanaTM
Ariadni®
Skylark®
Architectural Matte and Architectural Metal finishes:
Vierti®
|
80 Lutron
Nova Ta®
Nova®
Vareo®
Multiple devices with line and low-voltage can be mounted under
a common wallplate using a standard barrier backbox (see Lutron®
Application Note #213 at www.lutron.com/applicationnotes).
Wallplate configurations
2-gang Satin Color wallplate with Maestro and shade keypad
Wallplate configurations
2-gang gloss wallplate with Abella and shade keypad
|
Lutron 81
|
Lutron accessories seamless coordination
®
Lutron accessories
Available in Designer Gloss, Satin Colors, Architectural Matte, or Architectural Metal finishes:
GFCI
phone jack
|
82 Lutron
Dimmable receptacle
cable jack
receptacle
1-6 gang
designer
opening
wallplates
6-port jack
1-6 gang
traditional
opening
wallplates
Sivoia QED
®
| wiring
|
Lutron 83
Sivoia QED
®
| wiring overview
Sivoia QED system layout
Common components for a Sivoia QED roller shade
system (not shown to scale)
Low voltage communication
and power wiring
Roller shades
containing electronic
drive units (EDU)
Drapery track
containing EDU
Infrared remote
(optional)
Communication
wiring
Sivoia QED Power/Communications
Panel shown
Sivoia QED keypads
Sivoia QED system wiring details
•
Sivoia QED utilizes 24V~ for power
•
Wiring may be centralized utilizing a Sivoia QED power panel, or individual
transformers can be installed for a localized wiring scheme
Individual transformers
For smaller projects, or to more easily
accommodate retrofit applications
•
Choose from a selection of plug-in and
junction-box transformers to power individual
Sivoia QED drives
•
See the Sivoia QED technical reference guide
(P/N 367-592) or visit www.lutron.com
for more information.
•
|
84 Lutron
Sivoia QED power panel
SVQ-10-PNL
•
Provides power and communication wiring for
up to 10 Sivoia QED EDUs
•
Utilizes a custom seven-conductor
combination communication/power cable
(SVQ-CBL-250) or specify separate power
and communication wiring.
•
See the Sivoia QED technical reference guide
(P/N 367-592) or visit www.lutron.com for
more information
|
power and options individual transformers
1
A
M
P
CA
DRG
CA
SV-100SF-PI
100VA plug-in
transformer for roller
shades with up to
225 square feet of fabric
Dimensions:
Width: 3.93 in. (100 mm)
Length: 3.77 in. (96 mm)
Depth: 4.95 in. (126 mm)
SV-50SF-PI
50VA plug-in transformer
for roller shades with up to
50 square feet of fabric
Dimensions:
Width: 2.36 in. (66 mm)
Length: 2.88 in. (73 mm)
Depth: 1.75 in. (44 mm)
SV-100SF-JBOX
100 VA junction-box
mount transformer for roller
shades with up to
225 square feet of fabric
Dimensions:
Width: 4.06 in. (103 mm)
Length: 3.48 in. (88 mm)
Depth: 4.06 in. (103 mm)
Wire Type B
Sivoia QED
roller shade
Sivoia QED
keypad
Wire Type C
CA
DRG
CA
Sivoia QED
plug-in transformer
CA
DRG
CA
CA
DRG
CA
Wiring Type Key
Type B
Comm Link
4 conductor #18 AWG
(twisted/shielded)
Type C
Power Supply
3 conductor #16-20 AWG
Notes:
1. Each transformer powers 1 EDU and 1 keypad
2. Each 50V~ transformer uses .45A.
Up to 36 50V~ transformers per 15A circuit
3. Each 100V~ transformer uses .85A.
Up to 17 100V~ transformers per 15A circuit
|
Lutron 85
AA
|
power options power panel
BB B
DD D
CC C
with cover
Dimensions
10.3 in. (262 mm)
9.5 in. (241 mm)
17.5 in. (445 mm)
3.9 in. (99 mm)
without cover
120 V~
SVQ-10-PNL
|
86 Lutron
|
power options power panel wiring diagram
A
Sivoia QED
B power panel
120 V~
D
Wire Type A
Sivoia QED roller shade
C
Wire Type A
Sivoia QED roller shade
Wire Type A
Wire Type B
Sivoia QED drapery track
Sivoia QED keypads
Wiring Type Key
Type A
SVQ-CBL-250 Power and communications
7 conductors:
2 #16 AWG Power Supply
1 #18 AWG Earth Ground
4 #18 AWG Comm link (twisted/shielded)
Type B
Comm Link
4 conductor #18 AWG (twisted/shielded)
|
Lutron 87
Sivoia QED
®
| Lutron
®
supplied cable
Sivoia QED cable
Lutron offers a 7-core cable which incorporates both
power and communications into the same bundle.
SVQ-CBL-250 power and communications
7 conductors:
2 #16 AWG Power Supply
1 #18 AWG Earth Ground
4 #18 AWG Comm link (twisted/shielded)
SVQ-CBL-250
Transformer capacity (120 V~)
Model number
SVQ-PNL-10
Current
per transformer
8 A/panel
SV-50SF-PI
SV-100SF-PI
SV-100SF-JBOX
.45 A
.85 A
.85 A
Transformers
per 15 A circuit
1 panel
10 EDUs
36
17
17
Transformers
per 20 A circuit
2 panels
20 EDUs
44
23
23
Each EDU requires a dedicated transformer. One SVQ-PNL-10 powers up to ten EDUs.
Refer to Sivoia QED Applications Note #2 for alternative cable options.
(www.lutron.com/shadingsolutions)
|
88 Lutron
Sivoia QED
®
| integration
|
Lutron 89
|
integration residential
Designer-style keypad (shown actual size)
Convenience and elegance
Seamlessly integrate shades and draperies with
Lutron® lighting control systems throughout the
home. Control all the light using aesthetically
consistent controls available in a wide variety of
colors and finishes (see pg 71).
Entire room
Lutron’s GRAFIK Eye® lighting control system
offers scene-based control of the light in any area
of the home. One button can adjust lighting and
shades with subtle or dramatic transitions.
• Home theater
• Bedroom
• Living room
|
90 Lutron
Whole home
Expand one-touch control to the entire home
with Lutron’s HomeWorks® and RadioRA® lighting
control systems. Integrate with A/V, security and
other home systems. Simplify daily routines, and
enhance security, all at the touch of a button.
• Any size home
• New construction or retrofit
• Remote access via phone or modem
|
integration commercial
Architectural-style keypad (shown actual size)
Aesthetic integration
Make a space as productive as possible with
one-touch control of both electric and natural
light. Keep presentations moving smoothly and
maximize HVAC efficiency throughout an entire
building with automated adjustment of shades
and lighting.
Entire room
Bring integrated control of lighting, shading
systems, and projection screens to presentation
spaces and classrooms. The Lutron® RadioTouch®
control system is simple to use and can be easily
retrofitted into any space.
• Conference room
• A/V presentation space
• Classroom
Whole building
Control lighting and shading in any space or
throughout the entire building with Lutron’s
GRAFIK® systems. Lighting for restaurants,
hospitality spaces, and corporate areas can
be easily controlled and adjusted.
• Reduce glare and eye fatigue
• Maximize HVAC efficiency
• Increase productivity
|
Lutron 91
|
integration lighting control interfaces
Sivoia QED® integrates shading with Lutron® lighting control systems. Provide
total lighting control for single room, whole home, or whole building solutions.
Single room
lighting control
GRAFIK Eye®
rovides two-way communication between
P
Sivoia QED and GRAFIK 3000 or GRAFIK
4000 lighting control systems
• Allow 1 zone on the GRAFIK Eye main unit
for each system
•
SG-SVC
Whole home
lighting control
eceives RF signal from RadioRA
R
system and operates all EDUs on the
communication link
• Counts as 1 dimmer on the RadioRA system
RadioRA®
•
RA-SVC
HomeWorks®
•
rovides two-way communication between
P
HomeWorks and Sivoia QED systems for up
to 96 devices
HWI-Q96
Whole building
lighting control
rovides two-way communication
P
between Sivoia QED and GRAFIK 5000,
GRAFIK 6000, and GRAFIK 7000 lighting
control system
• Occupies one address on wallstation link
GRAFIK 5000TM
GRAFIK 6000®
GRAFIK 7000TM
•
SG-SVC
QuantumTM
|
92 Lutron
•
software and hardware-based solution
A
used to manage and report on EcoSystemTM
lighting and Sivoia QED shades across
a network
Sivoia QED
®
| specification tools
|
Lutron 93
Sivoia QED
®
| specification tools
Literature
Sivoia QED overview
(P/N 367-1373)
Complete overview of
Sivoia QED product line
Sivoia QED
specification catalog
(P/N 367-1455)
Specifier’s overview of
Sivoia QED product line
Roller shade fabric
specification guide
(P/N 367-929)
Overview of fabric specification,
properties and terminology.
Ideal for architects and
interior designers
Residential
applications brochure
(P/N 367-1319)
A “day in the life” of a home
enhanced by the Sivoia QED
family of products
Technical tools
Specification
submittals
(www.lutron.com/
shadingsolutions)
|
94 Lutron
Written specifications
(www.lutron.com/
shadingsolutions)
CSI and master spec format for
Sivoia QED product line
CAD drawings
(www.lutron.com/
shadingsolutions)
Dimensional drawings or system
components available in .DWG,
.DXF, and .PDF formats
Fabric and material sampling
Sampling tools include a collection of roller
shade fabric cards. Availability of all fabrics
and materials subject to change without notice.
For samples, contact customer service at
1.800.446.1503 or order through SCT.
Fabric sampling
The 8 in. x 10 in. sampling program is provided
to support specification submittals. For samples,
contact customer service at 1.800.446.1503 or
order through SCT.
Metal color samples for lineals such as fascia and
side channels are also available.
Shade Configuration Tool (SCT) software
Lutron® continues to improve this dynamic,
indispensable tool. Now, easier interfaces and more
detailed illustrations allow to you to specify your
shading products quickly and efficiently.
The SCT includes the latest engineering
guidelines and products and is the first step to
obtaining fast, accurate quotes for your order.
|
Lutron 95
Sivoia QED
®
| specification overview
Aesthetics
Flexibility and performance
Minimal, symmetrical light gaps
Sivoia QED® roller shade systems offer light gaps
of .75 inch per side.
Limits and presets never lost
Limits and preset shade positions are electronically
precision-set and locked, providing power failure
memory for the entire product lifetime. These limits
and presets will never slip regardless of age,
electrostatic discharge, or power failure.
Elegant control options
Lutron® controls are designed to match the high-end
look and feel of today’s premiere working and living
spaces and are available in a wide variety of colors
and finishes, including metals.
Wide array of fabrics
Lutron shading systems are available in sheer,
privacy, and blackout fabrics to suit any function
or aesthetic need, including many PVC-free
fabric choices.
Total light control
Lutron lighting control systems integrate with
Sivoia QED shades, offering intuitive control of
both electric light and daylight.
|
96 Lutron
Sustainable design and LEED™
Lutron shading and lighting controls
may contribute to obtaining up to
20 points in 5 of 6 LEED credit categories.
System warranty and support
Sivoia QED systems come with an 8-year limited
warranty, plus optional extended service. Lutron
has factory-employed field service engineers
throughout the world and is the only lighting control
or shade systems manufacturer in the world with a
24-hour, 7 days a week technical support center.
Control
Installation
Ultra-quiet electronic drive
The Sivoia QED system is low-voltage and
operates at a near-silent level (rated at 44 dBA at three
feet). Shades move smoothly and stop at
preset positions with no audible clicks.
Simple reconfiguration
The Sivoia QED system can easily be reconfigured,
limits can be changed, and presets can be
reprogrammed without rewiring by using the
remote, keypad, or electronic drive unit (EDU).
Intelligent hembar alignment™
All shades in a Sivoia QED system will track
together and stop at programmable preset
positions to within .125 inch. By utilizing intelligent
hembar alignment, roller 20™, roller 64™, roller 100™,
and roller 225™ shade systems will move and track
together, even though they use different size
roller tubes.
Simplified wiring
Sivoia QED shading systems do not require any
group controllers, relays, or line-voltage wiring
between electronic drive units. Wiring can be
simplified by using an optional Sivoia QED power
panel, allowing all system wiring to be run to one
convenient location.
Built-in infrared capability
All Sivoia QED systems ship from the factory
ready to receive infrared control signals.
Total light control
Lutron lighting control systems integrate with
Sivoia QED shades and drapery track, offering intuitive
control of both electric light and daylight.
About Lutron
Lutron has been the world’s leading manufacturer
of lighting control systems for over 45 years,
continually innovating, while offering world-class
service and support.
|
Lutron 97
www.lutron.com/shadingsolutions
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
U.S.A.
World Headquarters +1.610.282.3800
Barcelona I Beijing I Berlin I Hong Kong I London I Madrid I Mexico City I
Milan I Paris I São Paulo I Shanghai I Singapore I Tokyo
Technical Support Center 1.800.523.9466
Customer Service 1.800.446.1503
© 05/2008 Lutron Electronics Co., Inc.
98 Lutron
|
I
Printed in the U.S.A.
I
P/N 367-1455