CALL YOUR WOODHEAD
REPRESENTATIVE TODAY!
SEE
PAGES
2-7
SAFEWAY® NYLON PIN AND SLEEVE DEVICES — 60 AMP EXPOSITION DEVICES
4-POlE, 5-WIRI GROUNDING
60A - 277/480VAC
Face View
Y560B
Description
Woodhead Number
60A Exposition Receptacle
Y560R
60A Exposition Connector
Y560C
60A Exposition Receptacle
with Flip Lid
Y561R
©
60A Exposition Plug
Y560P
fop
60A Exposition Inlet
Y560B
0J5&
V
60A Exposition Inlet
with Flip Lid
Y561B
Adapter Plate for Standard Black Box
50-0110
Replacement Cable Clamp
40-0560
Y560P
158 Daniel Woodhead Company
Y560C
Y560R
Y561B WITH FLIP
Y561R
50-0110
40-0560
Safeway is a registered trademark of Woodhead Industries, Inc.
CALL YOUR WOODHEAD
REPRESENTATIVE TODAY!
SEE
P A G E S
/J
2 - 7
SAFEWAY® NYLON PIN AND SLEEVE DEVICES
GENERAL SPECIFICATIONS
Applications: Temporary power systems, power disconnect for portable processing equipment,
machinery intended for export and users of foreign-built equipment.
Construction:
• Type G nylon housing — weatherproof (IP44), impact-resistant, chemical-resistant.
• Type G nylon contact carrier.
• Deadfront construction.
• Self-adjusting split contact sleeves. Nickel-plated steel spring compensates for wear, maintains
constant pressure along contact surface to ensure electrical continuity and grounding.
• Latching mechanism prevents accidental disengagement.
• Keyway for fast, accurate alignment.
• Internal strain relief with "swing away" feature.
• External strain relief reduces bending arc of cable.
• Large, identified terminals accept conductors one or two sizes larger or smaller than normal.
• "Onion ring" neoprene bushing in cable grip accommodates wide range of cable sizes.
Approvals: U.L. Listed. CSA Certified. Conforms to IEC 309-1 and 309-2 Standards.1
1
IEC 309 PIN AND SLEEVE
CONFIGURATION AND
COLOR-CODING STANDARD
1EC 309-1 and 309-2 are a worldwide pin and sleeve standard established by the International Electrotechnical Commission. It meets
requirements of Section 410-56(g) of the National Electrical Code.
Contact Positions
The grounding contact position is based on a clock face. With the keyway at bottom, the female
grounding contact will appear at one of the 12 clock positions. Example: all 480VAC receptacles
and connectors, regardless of amperage, have their grounding sleeve at 7 o'clock (which puts die
grounding pin on all mating plugs and inlets at 5 o'clock).
Voltage Rating Color-Code
The housings of every device in a particular voltage group are identical in color for instant identification. Example: All 480VAC devices are red, all 250VAC devices are blue.
Amperage Rating Identification
Amperage differences can be identified by the relative sizes of the devices. Smallest is 20A,
largest is 60A.
DANIEL WOODHEAD CATALOG
NUMBERING SYSTEM
First Digit
3 = 3-Wire
4 = 4-Wire
5 = 5-Wire
Second Series
of Digits
20 = 20A
30 = 30A
60 = 60A
100 = 100A
Letter
P = Plug
R = Receptacle
C = Connector
B = Inlet
BA = Angled Inlet
Third Digit
Clock position of female grounding contact.
Examples:
430R7 = Woodhead 4-Wire, 30A receptacle with a grounding sleeve at seven o'clock.
430P7 = Woodhead 4-Wire, 30A plug-which mates with a grounding sleeve at seven o'clock.
CORD GRIP RANGES
p|ugand
Cable Diameter
Cable Diameter
Connector Type
Min. (in.)
Max. (in.)
320
420
520
330
.395
.395
.395
.395
.710
.710
.710
.825
.825
.825
.825
1.20
1.20
1.50
430
530
60A
Note: ForWatertite'1products, seepages 121-128.
152 Daniel Woodhead Company
Safeway and Watertite are registered trademarks of Woodhead Industries, Inc.
1