EN54-4 PSU Range Technical Specifications
BF360-12
12V 2A
BF360-24
24V 1.5A
BF361-3/BF362-3
24V 3A
BF361-5/BF362-5
24V 5A
230V ac 50/60 Hz
2A
1Ahr to 12Ahr
up to 30Ahr
1 x 12V 3Ahr (with STU
plate) 7Ahr (without)
Yes
Yes
12mA approx
230V ac 50/60 Hz
1.5A
1Ahr to 12Ahr
up to 22Ahr
2 x 12V 3Ahr
Yes
Yes
12mA approx
230V ac 50/60 Hz
3A
1Ahr to 12Ahr
up to 45Ahr
2 x 12V 7Ahr (BF361-3)
2 x 12V 17Ahr (BF362-3)
Yes
Yes
12mA approx
230V ac 50/60 Hz
5A
1.6Ahr to 18Ahr
up to 56Ahr
2 x 12V 7Ahr (BF361-5)
2 x 12V 17Ahr (BF362-5)
Yes
Yes
15mA approx
1A HRC 20mm ceramic
3.15A F 20mm glass
1A HRC 20mm ceramic
3.15A F 20mm glass
1A HRC 20mm ceramic
5A F 20mm glass
2A HRC 20mm ceramic
5A F 20mm glass
Power Supply Specification
Mains supply voltage
Max. continuous output current (including charging)
Standard battery charge capacity
Special order battery charge capacity
Max VRLA battery size determined by cabinet size
Batteries monitored for disconnection and failure
Batteries protected against deep discharge
Quiescent current on mains fail
Fuses
Mains supply fuse (F1):
Battery fuse (F2):
Power Supply PCB Connections
Mains input
Supply Output
Battery Input
Fault Relay
Charge off Input
Battery charge current link (not fitted)
Battery charge current link (fitted)
Battery monitoring link
Display connector
High temperature output
Three mains supply input terminals, Live, Neutral and Earth
24V dc
24V dc
24V dc
Connection to the VRLA battery
Isolated relay output rated 1A@50V
Disablement of the battery charge, volt-free short to OV
1 to 3.5Ahr (0.2A)
1 to 3.5Ahr (0.2A)
1 to 3.5Ahr (0.2A)
1.6 to 5.5Ahr (0.333A)
3.5 to 12Ahr (0.7A)
3.5 to 12Ahr (0.7A)
3.5 to 12Ahr (0.7A)
5.5 to 18Ahr (1A)
Fitted if batteries not used
4-way connector from power supply PCB to display card
Operates at approx. 55oc internal box temp, 200mA @ 30V max. current sink
12V dc
Indicators
Panel indicators (LEDs)
Supply present (green) - indicates the supply is present at the output
Fault (amber) - indicates a current fault on the PSU
Auxiliary Fault (amber) - indicates a fault with an auxiliary unit (user definable)
Hazardous Voltages Present (red)
Power supply PCB (LED) - internal
Dimensions
Physical size (W x H x D) mm:
380 x 235 x 96
380 x 235 x 96
1.75kg
1.75kg
Weight (without batteries):
ORDER CODES
465 x 290 x 103 (BF361-3)
404 x 404 x 110 (BF362-3)
3.80kg (BF361-3)
5.25kg (BF362-3)
Order Codes
24V EN54-4 BOXED POWER SUPPLIES AND ANCILLARIES
BF360-24
24V 1.5A EN54-4 Boxed PSU
BF361-3
24V 3A EN54-4 Boxed PSU (small box)
BF362-3
24V 3A EN54-4 Boxed PSU (large box)
BF361-5
24V 5A EN54-4 Boxed PSU (small box)
BF362-5
24V 5A EN54-4 Boxed PSU (large box)
12V EN54-4 BOXED POWER SUPPLIES AND ANCILLARIES
BF360-12
12V 2A EN54-4 Boxed PSU
BF360SP
Optional STU mounting plate for BF360-12
CHASSIS ONLY EN54-4 POWER SUPPLIES
BF360-24/C
24V 1.5A EN54-4 Power Supply Chassis Only
BF361-3/C
24V 3A EN54-4 Power Supply Chassis Only
BF361-5/C
24V 5A EN54-4 Power Supply Chassis Only
BF360-12/C
12V 2A EN54-4 Power Supply Chassis Only
Contact our Sales Desk should you require power supplies with a larger battery charging capacity
than the standard figures quoted in the specifications above (minimum order quantities apply).
Manufactured by C-TEC, Stephens Way, Wigan, WN3 6PH. England
Quality System Certificate No: 176
Assessed to ISO9001 : 1994
UK Sales: Tel: 01942 322744. Fax: 01942 829867. Email: sales@c-tec.co.uk
European Sales: Tel: +44 1942 322744. Fax: +44 1942 829867. Email: eu.exports@c-tec.co.uk
Export Sales: Tel: +44 161 257 2541. Fax: +44 161 225 8817. Email: xportsales@xportsales.com
© C-TEC. Errors and omissions excepted. C-TEC operates a policy of continuous improvement and we reserve the right to alter
product specifications at our discretion and without prior notice. Approved Document No. DSF0360000 Rev 3
465 x 290 x 103 (BF361-5)
404 x 404 x 110 (BF362-5)
3.80kg (BF361-5)
5.25kg (BF362-5)
range
BF360-24
BF360-12
d 24V
d 12V
i
i
L
L
2A
Switch
mode
power
supply
1.5A Switch mode power supply
c
c
i
i
t
Plasal Back Box
Plasalt Back Box
Met
Met
EN54-4 power supplies
al
t
e
M ure
al
t
e
M ure
range
os
Encl
os
Encl
The latest revision of BS 5839-1 (the code of practice for fire alarm system design and installation) insists
all power supplies performing a mandatory function of a fire alarm system must comply with EN54-4.
tice
s
a
l
P closur
tice
s
a
l
P closur
En
En
As such, any power supply controlling a beam detector, auto dial unit, fail secure door system, digital
communicator, auxiliary sounder system, etc., must meet this standard.
C-TEC’s new range of cost-effective EN54-4 switch-mode power supplies include a host of user and
Max. physical battery size (with STU plate): 1 x 12V 3 Ahr
Max. physical battery size (no STU plate): 1 x 12V 7 Ahr
Standard battery charging capacity: 1 Ahr to 12 Ahr
Special order battery charging capacity: up to 30 Ahr
Enclosure size (WxHxD): 380 x 235 x 96mm
Max. physical battery size: 2 x 12V 3 Ahr
Standard battery charging capacity: 1 Ahr to 12 Ahr
Special order battery charging capacity: up to 22 Ahr
Enclosure size (WxHxD): 380 x 235 x 96mm
installer friendly features, as detailed below. Six versions are available, a 12V 2A model with optional
STU mounting plate (for auto-dial applications) and five 24V versions, one rated at 1.5A, two at 3A and
BF361-3
BF362-3
24V 3A Switch mode power supply
two at 5A.
24V 3A Switch mode power supply
All six versions are fully compliant with EN54-4:1997/A2:2006
Lidox
c
i
t
s
Pla Back B
Metal
Lidox
c
i
t
s
a
Pl l Back B
Meta
Features
6
66
Optional STU mounting plate
(for 12V 2A model only)
22
Deep discharge battery protection
2flagging of
and EN54
compliant2
777 impedance
2faults
battery
7
77
Optional high-temperature output
activates when internal box
temperature reaches 55oC, for
connection to ventilation fans, etc.
33
Single-pole volt-free changeover
3 any fault
relay8that switches 3
for
3
8
condition
8
88
44
Three LED indicators - supply
present, general fault
4 and auxiliary
44
9(for optional connection
fault 9
to
third-party eqiuipment)
11
Low 6
current consumption
11
55
al
t
e
M losure
6
1
EN54-4
EN54-4
EN54-4
EN54-4
5 charging
Link selectable
battery
55
10
10
10
capacity
9
99
10
10
10
EN54-4
EN54-4
EN54-4
EN54-4
All boxed power supplies fully compliant
with EN54-4:1997/A2:2006
tice
s
a
l
P closur
Max. physical battery size: 2 x 12V 17 Ahr
Standard battery charging capacity: 1 Ahr to 12 Ahr
Special order battery charging capacity: up to 45 Ahr
Enclosure size (WxHxD): 404 x 404 x 110mm
Max. physical battery size: 2 x 12V 7 Ahr
Standard battery charging capacity: 1 Ahr to 12 Ahr
Special order battery charging capacity: up to 45 Ahr
Enclosure size (WxHxD): 465 x 290 x 103mm
l
eta
M losure
En
Enc
BF362-5
BF361-5
tice
s
a
l
P sur
24V 5A Switch mode power supply
24V 5A Switch mode power supply
o
Encl
Lidox
c
i
t
s
a
Pl l Back B
Chassis only power supplies available
for OEMs
Power supplies with a higher battery
charging capacity available to special
order (minimum quantities apply).
Enc
Meta
Lidox
c
i
t
s
a
Pl Back B
Metal
Max. physical battery size: 2 x 12V 7 Ahr
Standard battery charging capacity: 1.6 Ahr to 18 Ahr
Special order battery charging capacity: up to 56 Ahr
Enclosure size (WxHxD): 465 x 290 x 103mm
al
Melotsure
Enc
al
t
e
M ure
os
Encl
tice
s
a
l
P closur
Max. physical battery size: 2 x 12V 17 Ahr
Standard battery charging capacity: 1.6 Ahr to 18 Ahr
Special order battery charging capacity: up to 56 Ahr
Enclosure size (WxHxD): 404 x 404 x 110mm
En
BF360-24
BF360-12
d 24V
d 12V
i
i
L
L
2A
Switch
mode
power
supply
1.5A Switch mode power supply
c
c
i
i
t
Plasal Back Box
Plasalt Back Box
Met
Met
EN54-4 power supplies
al
t
e
M ure
al
t
e
M ure
range
os
Encl
os
Encl
The latest revision of BS 5839-1 (the code of practice for fire alarm system design and installation) insists
all power supplies performing a mandatory function of a fire alarm system must comply with EN54-4.
tice
s
a
l
P closur
tice
s
a
l
P closur
En
En
As such, any power supply controlling a beam detector, auto dial unit, fail secure door system, digital
communicator, auxiliary sounder system, etc., must meet this standard.
C-TEC’s new range of cost-effective EN54-4 switch-mode power supplies include a host of user and
Max. physical battery size (with STU plate): 1 x 12V 3 Ahr
Max. physical battery size (no STU plate): 1 x 12V 7 Ahr
Standard battery charging capacity: 1 Ahr to 12 Ahr
Special order battery charging capacity: up to 30 Ahr
Enclosure size (WxHxD): 380 x 235 x 96mm
Max. physical battery size: 2 x 12V 3 Ahr
Standard battery charging capacity: 1 Ahr to 12 Ahr
Special order battery charging capacity: up to 22 Ahr
Enclosure size (WxHxD): 380 x 235 x 96mm
installer friendly features, as detailed below. Six versions are available, a 12V 2A model with optional
STU mounting plate (for auto-dial applications) and five 24V versions, one rated at 1.5A, two at 3A and
BF361-3
BF362-3
24V 3A Switch mode power supply
two at 5A.
24V 3A Switch mode power supply
All six versions are fully compliant with EN54-4:1997/A2:2006
Lidox
c
i
t
s
Pla Back B
Metal
Lidox
c
i
t
s
a
Pl l Back B
Meta
Features
6
66
Optional STU mounting plate
(for 12V 2A model only)
22
Deep discharge battery protection
2flagging of
and EN54
compliant2
777 impedance
2faults
battery
7
77
Optional high-temperature output
activates when internal box
temperature reaches 55oC, for
connection to ventilation fans, etc.
33
Single-pole volt-free changeover
3 any fault
relay8that switches 3
for
3
8
condition
8
88
44
Three LED indicators - supply
present, general fault
4 and auxiliary
44
9(for optional connection
fault 9
to
third-party eqiuipment)
11
Low 6
current consumption
11
55
al
t
e
M losure
6
1
EN54-4
EN54-4
EN54-4
EN54-4
5 charging
Link selectable
battery
55
10
10
10
capacity
9
99
10
10
10
EN54-4
EN54-4
EN54-4
EN54-4
All boxed power supplies fully compliant
with EN54-4:1997/A2:2006
tice
s
a
l
P closur
Max. physical battery size: 2 x 12V 17 Ahr
Standard battery charging capacity: 1 Ahr to 12 Ahr
Special order battery charging capacity: up to 45 Ahr
Enclosure size (WxHxD): 404 x 404 x 110mm
Max. physical battery size: 2 x 12V 7 Ahr
Standard battery charging capacity: 1 Ahr to 12 Ahr
Special order battery charging capacity: up to 45 Ahr
Enclosure size (WxHxD): 465 x 290 x 103mm
l
eta
M losure
En
Enc
BF362-5
BF361-5
tice
s
a
l
P sur
24V 5A Switch mode power supply
24V 5A Switch mode power supply
o
Encl
Lidox
c
i
t
s
a
Pl l Back B
Chassis only power supplies available
for OEMs
Power supplies with a higher battery
charging capacity available to special
order (minimum quantities apply).
Enc
Meta
Lidox
c
i
t
s
a
Pl Back B
Metal
Max. physical battery size: 2 x 12V 7 Ahr
Standard battery charging capacity: 1.6 Ahr to 18 Ahr
Special order battery charging capacity: up to 56 Ahr
Enclosure size (WxHxD): 465 x 290 x 103mm
al
Melotsure
Enc
al
t
e
M ure
os
Encl
tice
s
a
l
P closur
Max. physical battery size: 2 x 12V 17 Ahr
Standard battery charging capacity: 1.6 Ahr to 18 Ahr
Special order battery charging capacity: up to 56 Ahr
Enclosure size (WxHxD): 404 x 404 x 110mm
En
EN54-4 PSU Range Technical Specifications
BF360-12
12V 2A
BF360-24
24V 1.5A
BF361-3/BF362-3
24V 3A
BF361-5/BF362-5
24V 5A
230V ac 50/60 Hz
2A
1Ahr to 12Ahr
up to 30Ahr
1 x 12V 3Ahr (with STU
plate) 7Ahr (without)
Yes
Yes
12mA approx
230V ac 50/60 Hz
1.5A
1Ahr to 12Ahr
up to 22Ahr
2 x 12V 3Ahr
Yes
Yes
12mA approx
230V ac 50/60 Hz
3A
1Ahr to 12Ahr
up to 45Ahr
2 x 12V 7Ahr (BF361-3)
2 x 12V 17Ahr (BF362-3)
Yes
Yes
12mA approx
230V ac 50/60 Hz
5A
1.6Ahr to 18Ahr
up to 56Ahr
2 x 12V 7Ahr (BF361-5)
2 x 12V 17Ahr (BF362-5)
Yes
Yes
15mA approx
1A HRC 20mm ceramic
3.15A F 20mm glass
1A HRC 20mm ceramic
3.15A F 20mm glass
1A HRC 20mm ceramic
5A F 20mm glass
2A HRC 20mm ceramic
5A F 20mm glass
Power Supply Specification
Mains supply voltage
Max. continuous output current (including charging)
Standard battery charge capacity
Special order battery charge capacity
Max VRLA battery size determined by cabinet size
Batteries monitored for disconnection and failure
Batteries protected against deep discharge
Quiescent current on mains fail
Fuses
Mains supply fuse (F1):
Battery fuse (F2):
Power Supply PCB Connections
Mains input
Supply Output
Battery Input
Fault Relay
Charge off Input
Battery charge current link (not fitted)
Battery charge current link (fitted)
Battery monitoring link
Display connector
High temperature output
Three mains supply input terminals, Live, Neutral and Earth
24V dc
24V dc
24V dc
Connection to the VRLA battery
Isolated relay output rated 1A@50V
Disablement of the battery charge, volt-free short to OV
1 to 3.5Ahr (0.2A)
1 to 3.5Ahr (0.2A)
1 to 3.5Ahr (0.2A)
1.6 to 5.5Ahr (0.333A)
3.5 to 12Ahr (0.7A)
3.5 to 12Ahr (0.7A)
3.5 to 12Ahr (0.7A)
5.5 to 18Ahr (1A)
Fitted if batteries not used
4-way connector from power supply PCB to display card
Operates at approx. 55oc internal box temp, 200mA @ 30V max. current sink
12V dc
Indicators
Panel indicators (LEDs)
Supply present (green) - indicates the supply is present at the output
Fault (amber) - indicates a current fault on the PSU
Auxiliary Fault (amber) - indicates a fault with an auxiliary unit (user definable)
Hazardous Voltages Present (red)
Power supply PCB (LED) - internal
Dimensions
Physical size (W x H x D) mm:
380 x 235 x 96
380 x 235 x 96
1.75kg
1.75kg
Weight (without batteries):
ORDER CODES
465 x 290 x 103 (BF361-3)
404 x 404 x 110 (BF362-3)
3.80kg (BF361-3)
5.25kg (BF362-3)
Order Codes
24V EN54-4 BOXED POWER SUPPLIES AND ANCILLARIES
BF360-24
24V 1.5A EN54-4 Boxed PSU
BF361-3
24V 3A EN54-4 Boxed PSU (small box)
BF362-3
24V 3A EN54-4 Boxed PSU (large box)
BF361-5
24V 5A EN54-4 Boxed PSU (small box)
BF362-5
24V 5A EN54-4 Boxed PSU (large box)
12V EN54-4 BOXED POWER SUPPLIES AND ANCILLARIES
BF360-12
12V 2A EN54-4 Boxed PSU
BF360SP
Optional STU mounting plate for BF360-12
CHASSIS ONLY EN54-4 POWER SUPPLIES
BF360-24/C
24V 1.5A EN54-4 Power Supply Chassis Only
BF361-3/C
24V 3A EN54-4 Power Supply Chassis Only
BF361-5/C
24V 5A EN54-4 Power Supply Chassis Only
BF360-12/C
12V 2A EN54-4 Power Supply Chassis Only
Contact our Sales Desk should you require power supplies with a larger battery charging capacity
than the standard figures quoted in the specifications above (minimum order quantities apply).
Manufactured by C-TEC, Stephens Way, Wigan, WN3 6PH. England
Quality System Certificate No: 176
Assessed to ISO9001 : 1994
UK Sales: Tel: 01942 322744. Fax: 01942 829867. Email: sales@c-tec.co.uk
European Sales: Tel: +44 1942 322744. Fax: +44 1942 829867. Email: eu.exports@c-tec.co.uk
Export Sales: Tel: +44 161 257 2541. Fax: +44 161 225 8817. Email: xportsales@xportsales.com
© C-TEC. Errors and omissions excepted. C-TEC operates a policy of continuous improvement and we reserve the right to alter
product specifications at our discretion and without prior notice. Approved Document No. DSF0360000 Rev 3
465 x 290 x 103 (BF361-5)
404 x 404 x 110 (BF362-5)
3.80kg (BF361-5)
5.25kg (BF362-5)
range