BLOWSION PRODUCT DISTRIBUTION:
UNITED STATES
Exceed International [HotProductsUSA.com]
Riva Racing [RivaMotorsports.com]
FRANCE
Jet Import [JetImport.com]
AUSTRALIA
Australian Jet Ski Parts [AJSP] [Australian-Jetski.com.au]
UNITED KINGDOM
Line One Distributing [LineOneDist.co.uk]
MIDDLE EAST
K&S Racing Kuwait [965.482.7822]
JAPAN
SEIBU Marine [Marine.JOsawa.biz]
Fennec Group [Jetwave.jp]
Dealer and Distributor Inquiries Welcome:
info@blowsion.com
BUSINESS HOURS: Blowsion maintains daily business hours from 9:00 am to 5:00 pm, PST, Monday through Friday.
PRICES: All prices shown are subject to change without prior written or oral notice. All orders are invoiced at prices in effect at the
time of shipment. Blowsion is not responsible for any incorrectly printed product descriptions, part numbers, or prices.
TERMS: Standard Terms are pre-approved credit card purchases and Certified Money Orders. Personal checks and C.O.D. cannot be
accepted under any circumstances. Customers who refuse an order will be held responsible for return freight to Blowsion as well as the
original freight. Blowsion will not charge the customers’ credit card until the order is shipped, unless it is a special order. All goods
purchased with a credit card can only be shipped to the address on record of the cardholder. That is, the ship-to address MUST BE THE
SAME ADDRESS as where the credit card bills are received by the cardholder. NO EXCEPTIONS. This is to protect you, the cardholder,
from fraudulent use of your credit card number.
ORDERS: In most cases orders received before 12 noon PST will be shipped same day. However, due to seasonal changes in sales
volume please allow 24-72 hours to process some orders from time of receipt.
INTERNATIONAL ORDERS: When placing an order by e-mail or FAX, please include your exact shipping address and FAX number,
(with your country & city code). This is very important. We will e-mail you a quote and shipping options prior to shipping.
BACK ORDERS: We try to avoid backorder situations, but if it occurs, we will take your order and then call you as soon as the product
is again available.
SPECIAL ORDERS: All special orders are shipped prepaid only, and cannot be returned. (Mat Kits, Custom Painted items, etc).
SHIPMENT METHOD: All orders are shipped via UPS or US Postal Service (Military Addresses Only). The standard shipping method is
Ground Service. Orange (3 Day), Blue (2 Day) and Red (1 Day) services are also available at additional cost, and only when requested
and approved by Blowsion. We do not offer C.O.D. delivery for retail customers. If you require your order to be shipped via U.S. Postal
Service (Military Addresses Only), there will be additional handling charges due to costs incurred by Blowsion in delivering packages to
the Post Office (UPS, on the other hand, picks up daily from our facility).
CANCELLATIONS: Special ordered merchandise cannot be cancelled and are payable in advance. Cancellation of standard item
orders must be received prior to shipment of goods. Blowsion cannot cancel an order once it has shipped.
RETURNS & CLAIMS: Any requests for the return of goods purchased from Blowsion must be made within 10 days of receipt of goods.
No returns will be accepted after 10 days. Prior to any return shipment, call Blowsion for a Return Authorization Number (RA#) that will
be issued over the phone. Returned goods must be in NEW and UNUSED condition and in the original packaging and include
instruction manuals, hardware and all accessories relevant to the
product as it was shipped. If the merchandise has been installed on the watercraft or used, or is missing parts or manuals then you have
bought it and it cannot be returned. Merchandise can only be returned by the party that originally purchased it from Blowsion (ie: if you
bought it at a dealership) you must return it to that dealership. The customer is responsible for the return freight costs incurred. NO
SHIPPING CHARGES REFUNDED. No exceptions. If the merchandise is being returned because of a proven shipping or packing error
made by Blowsion, then Blowsion will only cover the cost for shipping the correct product back to the customer via UPS Ground or U.S.
Parcel Post shipping. Any expedited air freight requests or costs are the sole responsibility of the customer. Blowsion cannot issue call
tags. All approved returns are subject to a 20% restock charge plus the original cost to ship the goods the first time. Refunds will only
be for credit towards future purchases - no cash refunds or credit to credit card. In the event of a defective part or goods being
received by the customer, Blowsion will exchange the defective item for a new replacement at no charge upon the return of the
defective item. Damages caused by the shipper excluded.
FREIGHT CLAIMS: All merchandise should be thoroughly inspected by the customer upon receipt. If any shipping damage is found, it
is the customer’s responsibility to file a claim with the carrier. All claims to the carrier must be made within 24 hours of receipt of goods,
or preferably with the delivery upon recieving. All damage claims must be supported by a bill of lading/tracking number and invoice.
WARRANTY: All of the items sold by Blowsion are intended for watercraft racing use only and are not USCG approved, DOT approved,
or EPA approved. Any of the items sold in our catalog could possibly void the watercrafts manufacturer’s warranty. Blowsion warrants
its products to be free from any manufacturing defects at the time of delivery but makes no other warranty claims.
LIABILITY: The acceptance and/or use of any merchandise purchased from Blowsion by the customer hereby shall release Blowsion
from any and all liability pertaining to the use of such merchandise. The customer recognizes that any alteration or modification to any
watercraft may increase the risk of injury, accident or death, and may also render the watercraft illegal for use on public waterways.
BLOWSION KOLORS
PHONE: +1 (503) 625.3616
FAX: +1 (503) 625.1501
WEB: blowsion.com
EMAIL: info@blowsion.com
MAIL: PO BOX 104, SHERWOOD, OR 97140, USA
SHIP: 14420 TUALATIN-SHERWOOD RD, SHERWOOD, OR 97140, USA
F
F
R
C
S
R E E R I D E
R E E S T Y L E
A C E P E R F O R M A N C E
U S T O M P A I N T
I N C E 1 9 8 9
PHOTOGRAPHY CREDITS:
LUDOVIC MOUVEAU [fullgaz.com]
HEATHER SELWITZ BRIGLIA [hasfoto.com]
ERIK HAHR [hahr.com]
ANDY MAYNE [photo.jetmanUK.com]
RHONDA BURGESS [nascencyproject.com]
JON CURRIER [jonnycurrier.smugmug.com]
MATT ENGELS [masonsfuture.org]
IAN DAVIS [findmeanotherstripper.com]
ALL OUR BEST TO RALPH CAMPOS’ FAMILY
BLOWSION, OUR MANUFACTURERS, DISTRIBUTORS, AND DEALERS WILL NOT BE HELD RESPONSIBLE FOR ANY INJURY OR DEATH RESULTING
FROM THE USE, IMPROPER APPLICATION, OR MISUSE OF THESE PRODUCTS.
ALL PRICES AND SPECIFICATIONS LISTED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
B L O W S I O N . C O M
COPYRIGHT © 2009 ERIK HAHR / BLOWSION. ALL RIGHTS RESERVED. DUPLICATION STRICTLY PROHIBITED WITHOUT WRITTEN PERMISSION.
PROUDLY DESIGNED AND PRINTED IN THE U.S.A.
ALWAYS RIDE RESPONSIBLY. ALWAYS RIDE A STAND-UP.
The Blowsion Doctrine – 20 years in the making
Blowsion was established 20 years ago in 1989 by John Dady to serve the core of true purists of custom painting, Jet Ski freeriding, racing and freestyling. Devoted to integrity, quality and rendering the look and supplying the
parts that customers want and expect from direct communication and testing, John still airbrushes every custom painted item that leaves Blowsion. Unless we can finish our in house human-cloning technology soon, this will
continue to be the case.
Blowsion does not fit the slot of any Yellow Pages section. We are a specialized composite design, graphic design, artwork, and refinish facility with many facets and offshoots allowing for some pretty unique and effective
products and imagery to be generated. Individual design concepts and projects are achieved with top shelf professional skills and the finest materials available. We use only the highest quality billet aluminum, composite
materials, paints, primers, and repair resins.
With aggressive and dynamic graphic and product design Blowsion has endured to presently offer a full line of custom design finishes and aftermarket watercraft parts and upgrades. With countless past and current National and
World champions choosing Blowsion as their source for high performance parts and custom paint, the staff of Blowsion is as committed as ever to continuing to push the design envelope.
The Blowsion staff consists of a smorgasbord of backgrounds, with primary expertise in the fields of composite design, computer science, coffee consumption, graphic design, nude drawing, commercial art, sleep deprivation,
canine friendship, salt water abuse, graphic design, piston abuse and engine performance.
Not only do we manufacture our own extensive PWC Product line, we also distribute the top brands in the Watercraft industry to our expanding dealer network as well as the retail customer. R-D Racing, UMI Racing, Kommander
Industries, RRP Products, ADA Racing, ODI Grips, MSD, AC Racing, WORX, Jet Dynamics, RIVA, Factory Pipe, Skat Trak, and more all rely on the Blowsion staff to keep their products flowing and tech-supported. Same-day
shipping and tracking both domestically and internationally via our sales staff and online order system allow our customers to know with confidence that they will be on the water or track rapidly.
As an authorized direct dealer for both ARAI and BELL Street and Auto Racing helmets we can also supply you with the knowledge and correct fit off the shelf to compliment that Picasso helmet paintjob you have always desired.
With SHOEI and many other top helmet brands available please feel free to inquire via email for current model and pricing quotes.
Wanting a stand-out look? With the ease of sharing imagery and product ideas via email attachments, we highly recommend staring a dialogue this way. It allows us to have a more cognitive idea of your desired design and
project, thus we can better estimate the actual costs and options for you. Anything from F1-style airbrush renderings to carbon fiber composite accessories to color-matched billet bolt-ons. The goal ALWAYS is an unmistakable
joint endeavor that'll generate and share the positive vibe created by our enthusiastic staff and clients.
All graphics are painted on. We have a full Vinyl-CAD system for creating templates and incorporating your specific logo or detailed fonts that you may request. We use a combination of PPG brand primers, basecoats and high
solid clears as well as House of Kolor brand candies and graphic colors. In other words after countless years of mad scientist experimentation in the spray booth, we use a combination of automotive finishes to create what we feel
is a superior finish. We do not use water based airbrush colors or non-catalyzed basecoats. If your paint project is going to see the kind of speeds and abuse that today’s sports require, then please do not allow inferior and weak
finishes to be applied on it.
We will put together an accurate cost estimate for the paint work/design after we receive input from you on your desires and ideas. We will always want to personalize the design to your uniqueness, so it would be our job to
expose a few different ideas or "improvements" to make it YOUR new graphic design. At Blowsion we like to call it the new 2015 version of what maybe is your standard and expected “look."
PA I N T S E R V I C E S
18-19
Spending a day in the surf testing, or in the spray booth creating and designing may be tough work, but we are willing to continue to make the sacrifice to ensure that we always offer the best options, service, designs, and
performance for our customers. Check out our new products and gallery of modified and painted watercraft as well as some of the latest custom painted helmets on the web at Blowsion.com.
ENGINE
ENGINE / VIDEOS
CONTROLS
ACCESSORIES
COMPOSITES
HOOD KITS / SPONSONS
M AT S / T U R F
PERFORMANCE / BILGE
HANDLING / PUMP
SWAG
RIDING GEAR
HELMETS
PA I N T / S E AT C O V E R S
LIFESTYLE
02-03
04-05
06-07
08-09
10-11
12-13
14-15
16-17
18-19
20-21
22-23
24-25
26-27
28-29
BLOWSION.COM
01
Blowsion Logo Outerwears 01-02-081 $15.00
Blowsion logo Outerwears flame arrestor
water-resistant screens. 4" diameter, 2.25" tall.
Fits Prök and Tau Ceti flame arrestors.
Specifically formuldated to prevent water ingress.
Sold individually.
NOVI-Tec Dual Carburetors
Included: Maxflow flange carbs with Power Booster,
Rail Connector, Throttle Cable Bracket, Zero
Backlash Coupler, Jetting to your specification,
Installation Diagram.
01-02-141
01-02-142
01-02-143
01-02-151
01-02-152
01-02-155
01-02-156
01-02-157
Factory Pipe Kawasaki 800 SXR Wet Pipe
No hood mods required! This is THE pipe for the freestyle and
surf rider looking for the best bottom end grunt for their SXR.
Unreal performance and fit. Easy install and tuning.
Yamaha Dual 44mm
$1,435.00
Yamaha Dual 46mm
1,435.00
Yamaha Dual 48mm
1,435.00
Kaw SXR Stock Mod
525.00
Kaw SXR Stock Mod w/ Man 625.00
Kawasaki Dual 44mm
1,435.00
Kawasaki Dual 46mm
1,435.00
Kawasaki Dual 48mm
1,435.00
NOVI-Tec Single Carburetor
01-02-110
$695.00
Included: Maxflow flange carb with Power Booster, Throttle
Cable Bracket, Jetting to your specification, Installation
Diagram. (Not Shown)
Mikuni High-Volume Racing Fuel Pump
01-02-555
$53.95
For thirsty aftermarket carbs
here is the answer.
Genuine Mikuni quality and
performance. 18 GPH/70 LPH.
01-01-004
01-01-007
01-01-008
01-01-053
01-01-054
01-01-062
01-01-063
Blowsion Yamaha 701/760 Single Intake Manifold 01-02-251 $235.00
Designed to accommodate 44 mm, 46 mm and 48mm carbs (please specify).
Each kit includes spacer plate,manifold and gaskets.
Fits all 701/760 (62T/64X). Includes Spacer.
(Carburetor not included)
Blowsion Hi-Torque Starters
$238.00
Kawasaki 750/800 18330
Yamaha 701/760
18420
Billet aluminum drive coupler sets
$99.95
02-02-204 Kawasaki
02-02-251 Yam SuperJet/Blaster
Both models use the Kawasaki OEM
750/800 rubber damper (not included).
02-02-205 OEM KAW-UMI Dampener $51.60
Billet Carb Adapters
01-02-071
01-02-072
01-02-073
01-02-074
01-02-075
Keihin CDK 38-42
Keihin CDK 38-28
Mikuni SBN 44mm
Mikuni 38mm 3-bolt
Mikuni I-Series
$23.00
$23.00
$20.95
$20.95
$20.95
01-01-104
01-01-151
01-01-152
01-01-252
01-01-253
01-01-304
01-01-307
01-01-308
01-01-353
01-01-354
01-01-700
01-01-701
01-01-702
01-01-703
01-01-704
01-01-709
01-01-710
01-01-715
01-01-716
01-01-717
01-01-718
FP Exhaust Man. Kawi 750/800
FP Exhaust Man. Yam 701
FP Exhaust Man. Yam 760
FP Head pipe "A" Kaw
FP Head pipe "B" Yam
FP Chamber Kaw 750 Ltd
FP Chamber Kaw 800 Wet
FP Chamber Kaw 800 Dry
FP Chamber Yam SJ Ltd
FP Chamber Yam SJ Mod
FP Silicone Sleeve SXR RED HD
FP Coupler - SXi 750 Pipe
FP Coupler Silicone Sleeve SXR
FP Coupler Rep. B / Wet Pipe
FP Coupler Rep. Most Dry Pipes
FP Elbow Hose Yam B-Pipe
FP Dry Pipe O ring Kit
FP Lord Mnt Dry SXR/SJ Single
FP Lord Mnt Dry SXR/SJ Dual
FP Lord Mnt Ltd SXi Dual (sht)
FP Lord Mnt Dry Blstr/SJ Single
$299.95
299.95
299.95
324.95
324.00
289.00
289.00
289.00
289.00
289.00
15.95
21.95
15.95
18.75
21.95
54.95
14.95
18.95
49.95
29.95
39.95
Original
$59.25
Peak RPM Recall $84.30
RIVA Power Bomb 48mm Dual Carburetors
Yamaha
Kawasaki
$959.00
01-02-130
01-02-131
Carb Adapters - All in stock
RIVA Power Bomb 48mm Carburetor
01-02-101
$429.00
All Blowsion carb kits are pre-jetted for specific applications.
All Dual Kits includes throttle linkage & cable bracket.
NOTE: R&D Racing, Riva and Full Spectrum Single
and Dual intake manifold kits in stock. Call or e-mail
for specific engine recommendations.
(Call or Visit Website)
SXR 800 Exhaust Power Sleeve
01-01-050
$32.60
The new R&D billet aluminum Exhaust Power Sleeve inserts into the
stinger of the stock exhaust to reduce the singer size thereby increasing
back pressure. This is a simple installation that will increase top speed and add 100 RPM.
Blowsion Yamaha Billet Cylinder Head $392.35
For 701 or 760 Engines.
Unique chamber locking system to eliminate chamber
rotation and premature o-ring wear. Girdle hardware
system for maximum cylinder support. Computer designed
water jacket for balanced cooling. Wide range of dome sizes
to accommodate any performance needs. Head includes all
hardware needed for installation. Domes sold seperately.
01-03-101
01-03-102
01-03-103
01-03-104
01-03-105
Gunmetal Gray
Orange
Red
Black
Green
Kommander Head Without Girdle Kit: 01-03-002 $290.00
Billet Cylinder Head Girdle Kit
Stainless steel girdle hardware kit for JSU/Kommander
Industries billet Kawi cylinder head, Blowsion Yamaha head,
and R&D Cast heads.
01-03-200 Blowsion Girdle kit - Yam
01-03-201 Kommander/JSU Girdle Kit - SX-R
01-03-202 R&D Girdle Kit 750/800
Blowsion Yamaha Domes $41.95 each
For 701 or 760 Engines. Also available blank.
Blowsion / Tau Ceti Flame Arrestors
$47.95
Multi-Fit 4" round x 2" tall. Tau Ceti's new Pro Series II Flame Arrestors are constructed
from top-quality materials such as aircraft grade aluminum, stainless steel, and
a superior quality rubber base. With free flowing, stainless steel mesh they provide
an increase in accelleration and much better throttle response. The universal
rubber mount will fit any personal watercraft with a stock carburetor
using the appropriate adapter. No re-jetting is required
on stock boats. Sold Each.
01-02-001
01-02-002
01-02-004
01-02-005
01-02-007
01-02-008
01-02-009
02
BLOWSION.COM
Black
Blue
Green
Orange
Red
Silver
Yellow
Carb Adapters - All in stock
(Call or Visit Website)
01-03-121
01-03-122
01-03-123
01-03-124
01-03-125
01-03-126
01-03-130
01-03-131
01-03-132
01-03-133
01-03-134
01-03-135
01-03-136
01-03-137
01-03-138
Dome 701 82mm 29cc
Dome 701 82mm 31cc
Dome 701 82mm 33cc
Dome 701 82mm 35cc
Dome 701 82mm 37cc
Dome 701 82mm 39cc
Dome 760 85mm 32cc
Dome 760 85mm 34cc
Dome 760 85mm 36cc
Dome 760 85mm 38cc
Dome 760 85mm 40cc
Dome 760 85mm 42cc
Dome 760 85mm 44cc
Dome 701/760 Blank
Dome 850 Blank
Jetinetics Flywheel Kawasaki SXR
01-04-208
$575.00
Visit website for details. Kawasaki
and Yamaha Charging and Total Loss
flywheels available.
Factory Pipe Yamaha SuperJet Waterbox
01-01-453 $224.95
Factory Pipe was the first to manufacture Super Jet aluminum waterboxes and is still the industry
leader. FP boxes are deep drawn (stamped) for reliability and a perfect fit. Exhaust noise is only
slightly more than stock while providing better tone and throttle response. They design all
Factory Pipe waterboxes to complement FP SJ pipe
systems and the OEM SJ pipe. Fits all 1996-2007 Super Jet.
Kommander 800SXR Billet Cylinder Head 01-03-001 $373.00
Bolt on the new Kommander Industries billet cylinder head for
unbelievable power gains. Big gains in both acceleration and throttle
response. The lid and body are maunfactured from 6061-T6
aluminum and anodized with our special titanium corrosion protection
coating. These heads are completely o-ringed, no need to use a head
gasket, silicone or sealer of any kind. Kits are available with or with
out girdle kit. Note: Girdle kit requires that you machine clearance for
the girdle bolts to clear the cylinder. Domes are manufactured from
7075 series aluminum which is much less prone to cracking due to
high frequency vibration than 6061-T6 aluminum used on other
manufacturers' domes. The cylinder lid is drilled for three outlets
and comes complete with all hardware necessary for installation.
Domes sold seperately.
Blowsion Billet Carb Block Off
01-02-557
$39.95
Sanitary anodized and engraved Blowsion logo carb blockoff.
A necessity when using a remote fuel pump. Fits all Mikuni
carbs. Billet aluminum with all stainless hardware included.
Prök Multi-Fit Flame Arrectors 01-02-021 $47.95
Flame Arrestor - Prök - Multi-Fit. 4" Round x 2" Tall.
Prök high-flow aftermarket air filters feature an internal
vortex-shaped cone and rolled intake edge for the
highest, most unrestricted airflow possible. Prök Air
Filters greatly improve low speed idle and acceleration.
$760.00
820.00
870.00
775.00
775.00
770.00
795.00
Factory Pipe Replacement Parts
Tiny Tach
The Tiny Tach tachometer will monitor engines
on all stand-up models with single or twin
cylinders. Tiny-Tach can be mounted easily
using two mounting tabs or double-sided
tape. Electrical connections to the engine
simply attach to the insulated section of
the spark plug wire, connect the ground
wire to the engine ground and roll!
06-04-090
06-04-091
Kawasaki 750 SX/SXI/SXI Pro Limited
Kawasaki 800 SXR Wet
Kawasaki 800 SXR Dry
Yamaha SuperJet B-Pipe Limited
Yamaha SuperJet B-Pipe Mod
Yamaha Waveblaster Mod
Yamaha Waveblaster Dry
Fuel and Cooling Line - Colors (Sold per foot)
Fuel Hose 1/8" Primer Line - Clear, Blue, Green, Orange, Red - $1.25
Fuel Hose 1/4" Fuel Line - Clear,Blue, Green, Orange, Red - $2.00
Cooling Hose 3/8"- Clear, Blue, Green, Orange, Red - $2.75
ENGINE
Factory Pipe Yamaha SuperJet Limited/Mod & FX-1 Pipes
Comes complete with the exclusive tuneable headpipe, aluminum chamber, tuned
exhaust manifold and all required hardware.
Exhaust Manifold Conversion
Adapter
01-01-060
$142.95
This 6061 aluminum billet exhaust manifold conversion
adaptor allows the installer to use the Yamaha Factory
Pipe B Limited and B Mod Pipe to be installed
on a Kawasaki SXR 800 Motor. Can we say
Rippin' power?
$135.00
$81.50
$87.40
Kommander 800SXR Billet 7075
Cylinder Domes
$81.95 each
01-03-031
01-03-032
01-03-033
01-03-034
01-03-035
01-03-036
01-03-037
01-03-038
01-03-039
01-03-040
01-03-041
01-03-042
01-03-043
01-03-044
01-03-045
01-03-046
01-03-047
82mm - 22cc ea.
82mm - 24cc ea.
82mm - 26cc ea.
82mm - 27cc ea.
82mm - 28cc ea.
82mm - 29cc ea.
82mm - 32cc ea.
82mm - 22cc .030 step
82mm - 26cc .030 step
82mm - 27cc .030 step
82mm - 29cc .030 step
82mm - 25cc .050 step
82mm - 27cc .050 step
82mm - 29cc .050 step
85mm - 28cc ea.
85mm - 30cc ea.
85mm - 32cc ea.
TDR Power Spray "Silencer" Waterbox
$230.00
The Power Spray type waterbox is designed for the recreational
rider or racer who wants the maximum power increase with a
deep throaty sound. This waterbox design works well with mildly
and highly modified Yamaha and Kawasaki engines.
01-01-405
01-01-406
01-01-407
01-01-464
01-01-465
Kawasaki 750SX Baffled
Kawasaki 750SX Non-Baffled
Kawasaki SX-R Baffled
Yamaha Blaster
Yamaha Superjet 96+
Power Factor Pipe for Yamaha SuperJet
01-01-064
$1,299.00
Not for the faint of heart or wallet! The Power Factor Dry Exhaust system has been used
by the top freestyle riders for the last 7 years, and has won 6 world championships. It is an
essential add-on for those with extensively modified superstock and stroker engines that
are looking to optimize maximum horsepower. Fits all years Yamaha Super Jet. Comes
complete with the exclusive tunable head pipe, aluminum chamber, tuned exhaust
manifold and all required hardware. Requires reduced size fuel cell (pictured below).
Blowsion Case Kranker
01-03-820
$199.95
Blowsion Billet Crankcase
Reinforcement for Yamaha
Stroker crankshafts.
Power Factor Reduced Fuel Cell
01-02-508
$125.00
Reduced size 8.5 Liter (2.25 Gal) fuel cell. Less weight. Required when using
Power Factor Pipe. Specially designed fuel cell incorporates lower baffle section to
reduce fuel sloshing guranteeing uninterrupted fuel supply. Includes dual pickup and
return line hardware for easy install.
BLOWSION.COM
03
ENGINE
Blowsion Dual Exhaust Kits
Ultra sano and absolutely necessary for the stand up
freestyle and freeride purist. Allows exhaust pressure
during nose stands and aerial moves to exit out the side of
the ski, instead of loading up the rear exhaust and engine.
All stainless and aluminum parts. Kit includes all pre-bent
hoses(no universal radiator hoses allowed!),
custom made aluminum splitter, stainless
clamps and polished aluminum exhaust
outlet.
01-01-504
01-01-505
01-01-506
01-01-507
01-01-508
01-01-553
01-01-554
01-01-555
Exhaust/Dual- Kaw 750
Exhaust Outlet - Kawasaki
Kawi Dual Exhaust 90 Elbow
Exhaust/Dual- Kaw 800
Kawi SXR Dual Exhaust Splitter
Exhaust Kit - Dual - Yamaha SJ
Exhaust Outlet - Yamaha
Exhaust Splitter - Yamaha
Blowsion Fuel Fillers
Kit includes all necessary hardware (internal pickup and
block off cap for fuel tank filler neck). Bulletproof design
allows for ultimate fuel flow for thirsty carbs.
An absolute necessity for racers and freeriders running
aftermarket carbs. All billet and aluminum construction.
These are the real deal in hi-flow fuel delivery.
01-02-501 Fuel Filler - Yamaha - Single
$149.50
01-02-502 Fuel Filler - Yamaha - Dual
$169.20
01-02-505 Fuel Filler Single-Kaw-Frstyle
$149.50
01-02-506 Fuel Filler Dual - Kaw- Fresty
$169.20
01-02-507 Fuel Pickup - Dual-Kawi- Race
$115.95
VForce Delta 3 Reed Kits
$258.95
The VForce reed valve has been the first choice of watercraft
racers everywhere. Many of the top teams and racers depend
on the extra performance of the VForce Reed Valve System.
One of the major benefits of our reed valve is the huge
improvement in throttle response. In a sport where
holeshots and quick acceleration make the difference
between winning and losing, the VForce is a huge
advantage! Due to the increased airflow of a VForce Reed
Valve System there is a very tangible increase in overall
responsiveness.
01-02-306 Yamaha 701/760
01-02-307 Kawasaki 750/800
Carbon Tech Reeds
A Watercraft engine creates alot of horsepower very rapidly,
and the reeds need to be able to keep up with the demanding
motor. Carbon Tech reeds hold up longer than any reed
available. Fits all Yamaha twins.
01-02-321 Kawasaki Twins
$117.95
01-02-322 Yamaha Twins
$99.95
01-02-323 89-93 Yamaha SJ
$99.95
01-02-324 95 Yamaha
$99.95
Mikuni Zero Backlash Carb Coupler
01-02-525
$34.95
Zero Backlash coupler for connecting
Mikuni BN or SBN Carburetors.
04
BLOWSION.COM
$289.90
$94.90
$86.50
$289.90
$109.95
$289.90
$94.90
$86.50
Ignition Enhancer- Yamaha
01-04-051
$295.90
MSD ignition enhancer. Get rid of that worthless stock
setup and go MSD. Fits all Yamaha 650/701. Hotter spark
than stock ignition.
MSD Total Loss Ignition
MSD Programmable total loss ignitions allow precise control
of timing curve and RPM limit. New digital electronics and
waterproof housing provide reliable operation. Powerful
multiple sparks ensure complete combuustion and will even
fire a fouled plug! Kits come complete with digital ignition
unit, lightweight flywheel, trigger plate, trigger pick-up,
ignition coil, and helicore sparkplug wires.
01-04-101 Total Loss Kit MSD Kaw 650-800
$1,599.00
01-04-151 Total Loss Kit MSD Yam 650/760
$1,489.00
MSD Spark Plug Boot Retainer Kit 01-05-605 $17.50
13/16 Plug Only. Made from high-temp nylon. Secures
the boot to the base of the spark plug. UNREAL for
keeping spark plug boots attached during high flying
aerials and racing action. 2 per pkg.
MSD Saltwater Boot Kit and Terminals 01-04-411 $39.95
This is THE ANSWER for riders dealing
with erratic spark caused by corrosion
and exposure to saltwater. Kit includes
instructions, two MSD 90-degree boots,
MSD plug cap retainers, two MSD crimp-on
terminals, MSD vulcanizing tape, and dielectric
compound. Bring back that performance and keep
the corrosion from happening again. Every toolbox
needs these items. No more mositure in your plug
ends. We send these with all our Pro Surf riders
on Safari. Do it once and do it right!
Throttle Drum 01-02-520 $36.80
Billet Mikuni / Novi Throttle Drum. Machined from
6061-T6 aluminum and clear anodized for corrosion
protection. Features 9 different hole locations for
the throttle cable to attach. This allows increased adjustments
to accommodate any carburetor or throttle lever combination.
Features integrated throttle stops.
Mikuni Carb Rebuild Kit - Super BN 01-02-491 $48.95
Complete Mikuni Rebuild Kit for all Mikuni Super BN
38,44,46,48 and 49mm carbs. Genuine Mikuni brand.
Not a poor-quality aftermarket kit.
Kommander Angled Reed Spacer Kit
01-02-351 $79.95
Bolt on the new Kommander Industries
billet angled intake reed spacer kit.
Fits Kawaski 800SXR, 750SX, 750SXi, 750SXi Pro.
Coated Stainless Steel Base Gasket $24.95
The simple to install stainless and reuseable
base gasket, simply clean both mating
surfaces and install. Trick.
01-03-301 Kaw 800 0.010"
01-03-302 Kaw 800 0.020"
01-03-303 Kaw 800 0.030"
01-03-304 Kaw 800 0.040"
01-03-305 Kaw 800 0.050"
01-03-306 Kaw 800 0.060"
01-03-307 Kaw 800 0.070"
01-03-321 Yamaha 701
VIDEOS
FullGaz THE EARLY YEARS
The ultimate collection from the talented film
crew of the FullGaz Posse. This DVD is action
packed with camera action of some of the world’s
best Freeriders, and includes unreal footage some
of the most exciting alternative sports seen. FullGaz
has the best of the best ripping it up in Freeride Surf, Freestyle Motocross,
Tow-in Surfing, Stunt/Street Bikes, as well as Crazy Stunts, Funny Skits and
Smoking Hot Chicks showing off the best and brightest assets. See Joe
Kenney, Pierre Maxient, Marc Sickerling, Air Darin Anderson, Gil Beunrier,
Ross Champion and many more talented riders shred the waves around the
globe. Produced by, and for, the aficionados of Action Sports and the
alternative lifestyle, EARLY YEARS will bring you the Craziest Action and
the Hottest Babes from around the globe. Mix that together with a killer
soundtrack and you got one of the sickest Action Sports Films of the year.
FullGaz… is not just a state of mind, it’s a lifestyle. Be a part if it!
MSD Ignition Enhancer - Kawi 01-04-001 $287.60
Fits Kawasaki 750SX, 750SXi and 750SX-i Pro.
Hotter spark than stock ignition.
MSD Improved Coil - KAWI/YAM
01-05-012
$97.00
MSD Part No. 4294. Fits all years
Yamaha Super Jet 650/701/760, and
Kawi 750Sxi and 800SXR. More juice
for your powerplant than any OEM
coil can provide.
All My Crazy Friends 3
Back from a four-year hiatus, Fast Times Films Brings back the return of
All My Crazy Friends, with "All My Crazy Friends 3 - Live Fast, Die Fat".
The third offering in the series is over the top and cannot be missed.
The cult classic that helped inspire the sub-culture of Freeriding as
well as the pioneer of all the stupid and insane stunts you see on TV
has finally reared its ugly and full gonzo head for another round!
Filmed on location in Brazil, Bali, Spain, Mexico, and Australia and
as well as all over the United States, this DVD combines the best
watercraft and action sports athletes with an insane soundtrack.
Featuring Pro Riders Joe Kenney, Air Darin Anderson, Pierra Maixent,
Eric Malone, Gil Beurnier, James Visser, Jerry Brandon, Taylor Curtis
and more. Blowsion is proud to be a participating sponsor and
supporter of the AMCF crew and the Peralta Day Care Fund!
This video is simply tear-ass.
MSD 90 Degree Boot Kit and Terminals
01-04-410
$13.00
Each kit includes detailed instructions
two 90-degree boots, and two
crimp-on terminals.
Blowsion Dielectric Compound 01-04-414 $13.91
Put this 1.25 ounce tube of miracle gel in your toolbox!
This is the cure for for scattered spark resulting form
moisture and corrosion of your spark plug ends and boots.
When combined with vulcanizing tape you have an incredible
barrier against the dreaded sound of misfire resulting
from moisture in the spark plug boot.
Rampt
Eric Malone and the World Freestyle Watercraft Alliance have released
“ERIC MALONE'S RAMPT VOL#1." The video features the WFWA
15 foot ramp jump, shots in England, Spring Break in Cancun,
Chris Macclugage, Joe Kenney, Jeff Dawson, Mike Jones, Josh
and Brad Lustic, Randy Laine, Rick Roy, and many more!!
Mikuni Adjusting Screws $51.95
Mikuni high- and low-speed adjuster screws with "T"
cross bar - extended length. Each kit includes 2
high-speed and 2 low-speed screws. NOTE: Fits only
Mikuni I-series carbs / OEM KAWI Sxr Carbs and all OEM
Yamaha carbs. Absolutely a must for 2004 newer
Yamaha Super Jets with aftermarket pipes.
01-02-540 Kawasaki
01-02-544 Yamaha
Primer Kit - Carburetors
Starting the engine of your personal watercraft is never
a problem with a Blowsion primer kit. All brass fittings
and bulletproof plunger. Get rid of that worthless
factory choke and apply a direct shot of fuel!
01-02-401 Primer Kit - Single Mikuni $26.95
01-02-402 Primer Kit - Dual Mikuni $31.25
01-02-403 Primer Kit - Single Keihin $28.60
01-02-404 Primer Kit - Dual Keihin
$31.25
01-02-410 Primer Piston
$13.95
01-02-411 Primer Bulb
$14.95
Engine Keepers - Joe Kenney Design $74.95
Designed in conjunction by Blowsion Pro Freerider Joe Kenney, our
“Kenney Keepers” are a must have for any hardcore surf or flat-water
invert artist. Each set contains a left and right side front mount
retainer and extended stainless hardware for install. Our unique
close tolerance design retains the front, “top heavy” weight of the
engine block from being flexed or thrown forward during flat out
maneuvers, or inverts. Since this is a common occurrence even in
flat water racing action, we have also found them to be excellent
insurance against ever having to replace those expensive engine
mounts again. Each kit includes left and right contoured
brackets, and stainless mounting bolts.
01-03-801 Kawasaki
01-03-802 Yamaha
Odyssey Dry Cell Battery
01-05-300
$125.95
Simply the best battery available for today’s
standups. Dry cell means no spillage!
Longer storage life. Ready out of the box.
Fast recharge. Superior cranking power.
ZERO maintenance.
Freeloaders
It doesn't get much better than this. We watch this video here at
Blowsion every day. Joe Kenney and friends take on the most
exotic surf locations in the world. 'Extreme' may be an overused
word, but it fits this flick. Everything from hardcore surf aerobatics
to some entertaining shellfish footage. Pro Riders Chris Macluggge,
Taylor Curtis, Rick Roy, Clay Cullen, Randy Laine and many others
show us how it is done the Freeloader way!
Flow Control Valve
Blowsion stocks both 3/8 adjustable (pro version) and 3/8 non-adjustable
Flow Control Valves. This valve has been designed to prevent water
flow to the waterbox at idle and off idle engine speeds. This
allows the craft to be more responsive off the line and around
turns. Results are HUGE gains in throttle response.
All stainless internal parts. IJSBA race legal.
01-01-765 Pro Series
$49.95
01-01-766 Standard
$39.95
Coastal Rage
Famous Riders. Famous Places. Randy Laine, Eric Malone, Joe
Kenney and more go all out in coastal waters from Mexico to
Canada. Almost 2 hours of rippin'!
Mikuni Throttle Cable Bracket - Pump Side Mount
01-02-512 $25.95
Fits Most Yamaha - SuperJet - 6mm
or 8mm Throttle Cable.
Mikuni Throttle Cable Bracket
Diaphragm Mount 01-02-510
Fits 8-10mm Cable.
$25.95
Blowsion O-Ring Head Kits
Our bulletproof nitrile o-ring kits come with the same quality
and durability you have come to know and expect from Blowsion.
01-03-203
01-03-204
01-03-205
01-03-231
01-03-233
01-03-235
01-03-239
Kommander/JSU Kaw Head O-Ring Kit
ADA O-ring kit - KAWI 750/800
R&D Cast Hd O-Ring Kit 750/800
O Ring Kit Blowsion Yam Head
R&D Yam O Ring Kit Billet Hd
RIVA Yam O Ring kit Billet Hd
ADA O-Ring Kit Yam
$15.95
$22.50
$10.29
$17.10
$10.29
$14.90
$22.50
07-02-201
07-02-202
07-02-203
07-02-209
07-02-210
07-02-213
07-02-215
07-02-216
07-02-220
07-02-221
07-02-226
07-02-227
07-02-229
07-02-230
07-02-240
07-02-241
07-02-242
07-02-243
07-02-251
07-02-252
07-02-253
07-02-254
07-02-256
07-02-257
07-02-260
07-02-261
07-02-265
07-02-255
Video - Crazy Friends 1 DVD
Video - Crazy Friends 2 DVD
Video - Crazy Friends 3 DVD
Video - Crazy Friends DVD SET
Video - The Addiction - DVD
Video - Coastal Rage - DVD
Video - FreeLoaders - DVD
Video - Fullgaz- Early Years
Video - MotoSurf- DVD Set
Video - Moto Surf- DVD- Single
Video - NW Freeride - DVD
Video - Outside the Loop - DVD
Video - Rampt - DVD
Video - Star Twangled Banner
Video - Twangled - VHS
Video - Twangled View of Havasu
Video - Twangled Havasu 2
Video - Twangled Havasu 3
Video - WorldFinals 2004 - DVD
Video - WorldFinals 2005 - DVD
Video - WorldFinals 2006 - DVD
Video - WorldFinals 2007 - DVD
Video - WorldFinals 2008 - DVD
Video - WorldFinals 2009 - DVD
Video - Nitro Circus - Box Set
Video - Nitro Circus ThrillBillies
Video - Nitro Circus Lock ‘N’ Load
Video - Crazy Chicks Party DVD
$24.95
$24.95
$24.95
$69.85
$20.95
$23.95
$23.95
$24.95
$74.95
$24.95
$24.95
$24.95
$24.95
$24.95
$24.95
$24.95
$24.95
$24.95
$24.95
$24.95
$24.95
$24.95
$26.95
$26.95
$59.95
$29.95
$25.95
$24.95
BLOWSION.COM
05
CONTROLS
ODI Grips
No more frustrating glue on handle bar grips.
ODI's patented Lock-On Grip System for personal watercraft
uses four aluminum Lock Jaw Clamps (two on either grip) to
lock your grips onto the bars. They can be removed or installed
in just a few seconds without using any glues or ties and without
destroying your grips each time. Simply snap the aluminum Lock Jaw
Clamp onto the ears on either end of the grip. Slide the grip on to
the desired position on the handlebars and lock them into place
by tightening the allen bolts in each of the clamps. The special
ODI grip composition is actually sticky when wet!
U.M.I. Racing Handle Pole
Set up for the 96 newer Super Jet, Polaris Octane, and Blowsion Kawasaki
750 conversion system. Extruded design allows for simple cable and breather
tube routing. Features include narrower construction for superb fit and room
in the hood channel, Wider chin pad-mounting brackets, Left(Kawasaki)
and right side (Polaris, Yamaha) steering cable mounts, heavy-duty pole
bushings. 2009 Tested tought by UMI Pro rider Ross Champion.
Custom Paint Available!
ROGUE: thicker diameter grip, softer composition
RUFFIAN: thinner diameter grip, harder composition
XTREME: the popular blend - medium diameter and composition
03-05-300
03-05-301
03-05-302
03-05-303
03-05-305
03-05-306
03-05-307
03-05-308
03-05-309
03-05-310
03-05-311
03-05-312
ODI Extreme Silver Starter
ODI Extreme Gray Starter
ODI Extreme Black Starter
ODI Extreme White Starter
ODI Ruffian 130mm Black
ODI Ruffian 120mm Black
ODI Rogue 130mm Starter Blk
ODI Rogue 120mm Starter Blk
ODI Ruffian 130mm Pearl Wht
ODI Ruffian 130mm Pink
ODI Ruffian 130mm Green
ODI Ruffian 130mm Silver
03-02-006
03-02-007
03-02-008
03-02-009
03-01-002
03-01-003
$23.95
$23.95
$23.95
$23.95
$23.95
$23.95
$23.95
$23.95
$23.95
$23.95
$23.95
$23.95
ODI Lock Ring Set - Black
ODI Lock Ring Set - Blue
ODI Lock Ring Set - Clear
ODI Lock Ring Set - Gold
ODI Lock Ring Set - Green
ODI Lock Ring Set - Orange
ODI Lock Ring Set - Violet
ODI Lock Ring Set - Red
ODI Lock Ring Set - Yellow
ODI Lock Ring End Caps - Black
ODI Lock Ring End Caps - Blue
ODI Lock Ring End Caps - Clear
ODI Lock Ring End Caps - Gold
ODI Lock Ring End Caps - Green
ODI Lock Ring End Caps- Orange
ODI Lock Ring End Caps -Purple
ODI Lock Ring End Caps - Red
ODI Lock Ring End Caps -Yellow
$15.45
$15.45
$15.45
$12.75
$15.45
$15.45
$15.45
$15.45
$15.45
$26.95
$26.95
$26.95
$24.95
$26.95
$26.95
$26.95
$26.95
$26.95
Blowsion Crossbar Pads
$13.95
For use with all standup watercraft handlebars including
Blowsion Kommand Bars. Made from high-density
extremely lightweight foam to reduce rider injury from
impating handlepole and steering component area.
Wrapped with Power Wash Proof permanent Blowsion logo
graphics. Pad measures 5.5 inches in length.
03-05-121
03-05-122
03-05-123
03-05-126
Green
Blue
White
Runabout - White
Rick Roy Products Handlepole
$799.00
RRP Handlebars, Steering, and Brackets are Available!
The Ferrari of handlepoles now available for the 96+ Super
Visit Blowsion.com for a full listing of RRP goods.
Jet and KAWI SXR pole conversions. Adjustable up to 4 inches in either
direction, this futuristic design pole is not for the weak rider or the rider with a
lightweight wallet! Hardcore Freestylers, Freeriders, and Racers will be stoked on the
improved airflow and the heavy duty gusseted construction. Please note for Kawasaki SXR
riders- you will also need the following conversion items to bolt on a RRP pole: Yamaha Style Top
mount design Carbon Fiber Chin Pad , UMI Sealed Bearing Steering System W/ Blowsion Conversion
Kawi Turnplate (std length or minus 1" option available) and also a Billet Steering Stop. Also Recommended
is a Kommander Industries Spring Tensioner or Heavy Duty Replacement SXR Pole Spring to lighten the pole. Also
available for riders wanting to take advantage of the increased air flow design of the RRP pole is the RRP YAMAHA
Super Jet Pole Bracket and for the SXR Rider there is the RRP SXR Pole Bracket. Knee riders need not inquire!
03-02-031 RRP Pole Kawasaki
03-02-032 RRP Pole Yamaha
AC Racing aluminum handle poles
Available as direct OEM fit replacement in both
standard length, minus 1" and minus 2" configurations. Features include Heavy-duty nylon pole
bushings and exact OEM mounting positions for
hardware. Custom paint available!
06
BLOWSION.COM
03-02-011
03-02-012
03-02-013
03-02-014
03-02-015
03-02-018
03-02-019
03-02-021
03-02-022
03-02-025
03-02-026
03-01-004
03-01-005
Std 650 Kawi
-1" 750/800 Kaw
-2" 750/800 Kaw
Std 750/800 Kaw
Std FX-1 Yam
-2" 95- SJ Yam
Std 95- SJ Yam
-2" 96+ SJ Yam
Std 96+ SJ Yam
-2" RR 96+ SJ Yam
Std RR 96+ SJ Yam
SXR/AC Std Long
Conv. SXR/AC -2"
$510.00
$555.00
$555.00
$555.00
$538.00
$514.00
$514.00
$502.00
$502.00
$698.00
$698.00
$1,045.00
$1,045.00
$765.00
740.00
765.00
740.00
1,225.00
1,225.00
UMI Billet Steering System - Blaster and X2
UMI's increased steering head angle and shorter design allows the rider to move
forward, reducing hull porpoise and greatly improving handling. Steering shaft rides
in sealed bearings rather than plastic bushings. Eliminates all play associated with
factory steering systems.
X2-04600-TS
X2 Steering System - UMI
$320.95
03-01-300
UMI Waveblaster Steering Systm
$429.50
End Caps - Lock Rings
03-05-331
03-05-332
03-05-333
03-05-334
03-05-335
03-05-336
03-05-337
03-05-338
03-05-339
03-05-341
03-05-342
03-05-343
03-05-344
03-05-345
03-05-346
03-05-347
03-05-348
03-05-349
Handle Pole UMI PRO Std Black
Handle Pole UMI PRO Std Bare
Handle Pole UMI PRO -2" Black
Handle Pole UMI PRO -2" Bare
Handle Pole Conv. SXR/UMI Std
Handle Pole Conv. SXR/UMI -2"
Handle Pole Extension Limiting Rope
03-04-151
$41.95
The design of the Blowsion pole limiting rope
is to STOP your pole from extending approx 2-3"
from total max extension. This prevents the forward motion
of the pole and riders body from destroying expensive handlepoles, pole brackets, hulls
and also expensive human body parts! A spring back retention cord attaches to the
bottom of the pole spring area and will also pull the pole back down if you become
seperated from your ski in surf or large lake waves. All stainless mounting hardware and
instructions included. Fits Yamaha FX1, all years Yamaha Super Jet, Polaris Octane,
Kawasaki SXR 800, 750 SX, 650 SX & all JS models. A must for ocean or big wave riders.
Through extensive testing and feedback from the worlds top watercraft
racers, freeriders and freestylers, Blowsion has developed its own line of
handlebars so that each model places the rider in the best possible position
for both handling, performance and comfort. Designed with careful
tolerances to fit the popular ODI Grips with billet end caps. Manufactured
from 6063-T832 aluminum. Includes Blowsion cross bar foam pad. Offered
in Anodized black and clear.
Blowsion Phat Clamp
03-05-018
$85.90
Constructed of 6061 Aluminum and carbon grey anodized this ultra
trick clamp allows rider to move even further forward in the tray.
Developed in conjunction with Blowsion Professional Freeriders
Ross Champion and Pierre Maixent.
Blowsion Ski Kommand Bars - 0 and 4 Degree Bend With Crossbar
03-05-141 Hndl Bar 0-Deg w/X-bar Clear
$67.95
03-05-142 Hndl Bar 0-Deg w/X-bar Black
$67.95
03-05-143 Hndl Bar 4-Deg w/X-bar Clear
$67.95
03-05-144 Hndl Bar 4-Deg w/X-bar Black
$67.95
Blowsion Krok Kollar
03-05-019
$28.50
Blowsion Stainless Steel machined Steering Lock nut. Includes stainless
binding screw. Prevents standard lock nut torque failure. Not something
made in the land of won-tons or available at your local hardware store!
Fits all Blowsion and UMI Sealed Bearing
Steering Systems .
Blowsion Runabout Handlebars
Manufactured from 6063-T832 aluminum. 32” inches wide. Black and Clear
Anodized with crossbar and Blowsion foam pad. Width: 32.00", Sweep:
3.60", Rise: 3.5", Height 4.25. Cut lines included for riders wanting less bar
length. Includes Center mount indicator.
03-05-152 Blowsion Runabout Bar- 32" Blk
$67.95
03-05-153 Blowsion Runabout Bar- 32"CLR
$67.95
Steering System -Sealed w/ Short or Std Turnplate
Billet aluminum steering system with choice of turnplate. Stainless
Steel Turnplate shaft rides in two O-ring sealed bearings. Included
special machined Blowsion Krok Kollar stainless lock nut with set
screw. Three different steering ratios. Fits stock or aftermarket
handle poles. Short Option features 1 inch shorter design which
allows the rider to have a more aggressive forward riding position
w/o the cost of a new shorter handlepole. Steering head & bearing
housing are anodized carbon grey for corrosion protection. Fits all
years Yamaha SJ and FX1, Kawi 750 and SXR 800 Conversion kit,
and Polaris Octane.
Handle Bar - Blowsion - Blaster and Sport Class
Blowsion Kommand handlebars with crossbar and Blowsion foam pad.
Manufactured from 6063-T832 aluminum. Black Anodized. Width: 28.00",
Sweep: 2.55", Rise: 2.75", Height 3.25.
03-05-150 Blowsion Sport Bars-28"- Black
$67.95
03-05-151 Blowsion Sport Bars-28"- Clear
$67.95
03-05-001
03-05-002
03-05-003
03-05-004
03-05-005
Steering System W/O Plate
Strg Sys W/Turnplate Short Kaw
Strg Sys W/Turnplate Long Kaw
Strg Sys W/Turnplate Short Yam
Strg Sys W/Turnplate Long Yam
$149.00
$195.95
$195.95
$195.95
$195.95
03-05-041
03-05-042
03-05-043
03-05-049
Turnplate Kawasaki Short
Turnplate Kawasaki Long
Turnplate Yamaha Short
Turnplate Yamaha Standard
$49.90
$49.90
$49.90
$42.50
03-05-160
Billet Crossbar Clamps - Black
$7.15
$22.95
$22.95
$19.95
$19.95
$19.95
$22.95
$22.95
$23.95
$23.95
Steering Stop & Nut
03-04-131
$23.40
Blowsion stainless Steering Stop and nut. Updated design allows for
two mounting positions for riders wanting more steering throw. Fits all
OEM, UMI,Factory Yamaha, RRP and AC aluminum Handlepoles.
Required with KAWI SXR or SXI handlepole conversions.
Blowsion Kommand – Ski Handlebar Phat Bar Straight
Manufactured from 6063-T832 aluminum. 25.5 inches wide. Black
Anodized. Must be used in conjunction with Blowsion Sealed Bearing
system and Blowsion Phat Clamp.
03-05-145 Blowsion Bars- Straight- Fat
$49.95
Blowsion Kommand – Ski Handlebars Phat V Bar Riser
Manufactured from 6063-T832 aluminum. 25.5 inches wide. Black
Anodized. Must be used in conjunction with Blowsion Sealed Bearing
system and Blowsion Phat Clamp. The Blowsion Phat Riser allows for a
complete custom range of handlebar mount angles.
03-05-146 Blowsion Bars- Rise 52.5mm
$54.95
Pivot Bolt Bushings
Blowsion premium Delrin handle pole bushing
replacement sets.
03-04-101 Pvt-Blt Bushing Conv SX-R/UMI Pole
03-04-102 Pvt-Blt Bushing Conv SX-R/AC Pole
03-04-103 Pvt-Blt Bushing - OEM Kaw
03-04-105 Pvt-Blt Bushing - UMI/Yam
03-04-106 Pvt-Blt Bushing - All AC Racing Poles
03-04-107 Pvt-Blt Bushing - Kaw RRP
03-04-108 Pvt-Blt Bushing - Yam RRP
03-04-109 Pvt-Blt Bushing - YAM+30 RRP
03-04-110 Pvt-Blt Bushing - 92-95Yam RRP
BLOWSION.COM
07
Blowsion Trim Lever
$89.95
Left hand operated spring loaded trim lever for pump
freestyle/freeride tilt or racing trim systems. Ergonomically designed for premium fit and feel whether you
are on the waves or on the buoys. Lever is angled to reduce
hand and arm fatigue. Delrin bushings eliminate the play common in
aftermarket levers and provide a smooth lever pull. All stainless
hardware at the hinge point eliminates corrosion and play 100%.
No C-clips used. Available for all models. Anodized Clear.
03-05-230 Clear
03-05-231 Black
Blowsion Pole Bracket- for 96+SJ and FX1
Now Available in single and two hole breather option for the RRP Handlepole. Lowered billet aluminum handlepole pivot
brackets for '96 & newer Super Jets, 94-95 Yamaha FX1, and 750 Kawi Conversions. There is no match on the market today
for durability and performance. Will not break or bend. This is the Ferrari of handlepole brackets available. New features
include threaded recessed mounting holes for Blowsion hood straps and an extra wide base for additional support.
Oversize length(s) of breather tubing included. Blowsion design includes handlepole spring mounting hole for riders that
desire a light pole set up with handlepole spring (not available with other brackets w/o purchasing additional parts).
Blowsion now is the only manufacturer to offer this replacement billet bracket for the FX1. Please specify below when
ordering. Precisely machined from a chunk of billet aluminum (not welded
steel like other brackets on the market), this piece will not break or
bend. NOTE: Will fit stock hood and stock front cover w/ no modifications.
03-03-003
03-03-004
03-03-001
03-03-021
03-04-070
03-04-071
Blowsion Pole Bracket Sngl SJ
Blowsion Pole Bracket Dual SJ
Blowsion Pole Bracket- FX-1
FX1 Billet Bracket Clip Only
Vacuflex H-pole Tubing 2.25"
Vacuflex H-pole Tubing 2.0"
$259.00
$259.00
$279.00
$35.37
$22.95
$22.95
Handle Pole Bracket - Replacement
95 Older SJ 03-03-002 $259.00
Blowsion Billet 6061 aluminum
replacement for the cast factory OEM
bracket on all 1995 and older Yamaha SuperJets.
Oversize length of breather tubing included. Includes
oversize cable routing hole for installing the handlepole
breather tubing. Blowsion design also includes handlepole
spring mounting hole for riders that desire a light pole set up.
Totally sanitary.
Blowsion Billet Throttle Lever $68.50
Machined with the stand-up rider comfort
at a premium, the Blowsion straight pull
finger throttles are ergonomically
designed for premium fit and feel
whether you are on the waves or on the
buoys. Lever angle is situated to reduce hand
and arm fatigue. Delrin bushings eliminate the
play common in OEM throttles and provide a smooth
throttle pull. All stainless hardware at the hinge
point eliminates corrosion and play 100%. No
C-clips used. Available for all models. Some
models require throttle cable adapter
(listed below).
03-05-201 Black
03-05-202 Blue
03-05-204 Green
03-05-205 Orange
03-05-207 Red
03-05-208 Clear
03-05-209 Yellow
Throttle Adaptor - Kawasaki
Throttle Adaptor - Yamaha
Throttle Adaptor- Sea Doo
Fire Extinguisher Bracket
$79.00
Relocates extinguisher into engine compartment.
Includes all hardware. Bright dip anodized.
06-02-010 Yamaha
06-02-011 Kaw 750
06-02-012 Kaw SXR
Salt Terminator Kit
A salt dissolving solution for rinsing your watercraft.
Quart Kit comes with hose adaptor.
08
BLOWSION.COM
$97.95
$118.95
Kawasaki OEM Throttle Cables
54012-3732 OEM Kaw Throttle Cbl SX 92-94
54012-3743 OEM Kaw Throttle Cbl SXI 95
54012-3748 OEM Kaw Throttle Cbl SXi 1996
54012-3753 OEM Kaw Throttle Cbl SXI 97-02
54012-3773 OEM Kaw Throttle Cbl SXR 03+
$44.50
$44.50
$44.50
$44.50
$35.24
$29.95
$31.53
Scissor Stand
2 models. Fits all stand-up and runabout watercraft.
All-aluminum construction
06-05-001
06-05-002
Scissor Stand - Stand-up
Scissor Stand - Sitdown
$154.95
$169.95
AC Racing Work Cart
Premium design and bulletproof PWC Work
Stands. HIGH PROFILE for stand-ups,
LOW PROFILE for sit-downs.
Not designed for use in water.
06-05-003
06-05-004
Work Cart - Stand-up
Work Cart - Sit Down
$408.00
$458.00
OEM Yamaha and Kawi Steering Cables
GH1-67252-01-00
OEM Throttle Cable Blaster 96+
FX1-61481-00-00
OEM Yam FX1 Steering Cable
EW2-U1481-00-00
OEM Steering Cable SJ 90-95
GM6-61481-00-00
OEM Yamaha Steering Cable 96+
59406-3709
OEM Kawa Steering Cbl 550
59406-3726
OEM Kawa Steering Cbl 750
59406-3776
OEM Kawa Steering Cbl SXR
ACCESSORIES
Hood Bumper - Billet Aluminum
$54.95
KAWASAKI Direct replacement for OEM bumper.
Includes pre-cut foam and hardware. Bright dip anodized.
04-04-201 Clear
04-04-203 Red
04-04-204 Black
04-04-205 Green
Extended Bow Eye - Long John Silver
$17.95
Introducing Long John Silver. Extended Length bow
eye for those custom install rear mat kick wedges. One
extra full inch of thread gurantees plenty of material to
nut up to! Color: Clear and Black Anodized Only.
04-03-051
Black
04-03-058
Clear
Stainless Hood Latch Assembly
04-04-030
$149.95
Fits all 650/750/800/X2 Kawasaki. Comes complete
with latch assembly and hood clip. 100% polished
stainless. Trick and functional. Why incur the
factory OEM replacement expense?
Hood Latch - Billet
$64.50
Replace your rear factory hood latch with a billet
aluminum Blowsion latch and ride worry free.
Updated and re-machined to also fit the Kawasaki
SXR 800. Also fits all years Yamaha FX1 and all
years Yamaha Super Jet. A must for surf and big
wave riders, especially those running a Blowsion
pole limiting rope. Requires the stock base locking
hardware.
04-04-005 Orange
04-04-001 Black
04-04-006 Violet
04-04-002 Blue
04-04-007 Red
04-04-003 Clear
04-04-008 Clear
04-04-004 Green
04-04-009 Yellow
Hood Hooks - SuperJet
04-04-105
$69.95
Don't lose your hood again due to poor spring tension with the
stock hooks. Our billet aluminum hooks won't tweak or budge in even
the most extreme of conditions. Carbon grey anodized. Sold as a pair
complete with stainless fasteners.
Hood Hooks - SXR
04-04-101
$76.95
Utilizing our many years of Super Jet Freestyle and surf
quality hood hook design experience, these bulletproof
SXR billet hood hooks allow for the ultimate abuse of
your SXR on the race course, river or in big surf. Do
not risk losing your hood. No more tweaked or
broken OEM clips bending or breaking and causing
serious engine and wallet damage.
Super Siphon
06-04-089
$15.00
The coolest too out to remove fuel
without burping gas for a month.
Extended length of hose reaches
all angles and fuel tanks.
Not a beer bong!
Yamaha Low Pro Billet Fuel Cap
$58.00
Blowsion Low Pro Billet aluminum fuel caps for all
Yamaha watercraft. Low profile smooth design
allows for outside fueling, yet will not get in the
way during aerial or freestyle moves around the
front of the watercraft. Engraved grooves
allow for easy handling. 04-03-151 Black
Heavy Duty Steering Cables - Aftermarket
Go Banzai with these beefy bastards!
02-05-304 SJ HD Steering Cable
$229.25
02-05-305 SXR HD Steering Cable $189.00
$10.50
$10.50
$15.85
Salt Terminator - QT W/Mixer
Salt Terminator Refill Gallon
Yamaha OEM Throttle Cables
EUO-67252-02-00
OEM YAM 90-95 SJ
GM6-67252-00-00
OEM Yamaha 96+
Handle Pole Springs
The most common modification known to the stand up rider.
Reduce the weight of your handlepole in a matter of minutes
with supreme design Blowsion handlepole springs.
03-04-003 Blowsion Pole Spring 750/800
$41.95
03-04-011 Handle Pole Spring -95SJ
$35.75
03-04-012 Handle Pole Spring 96+ Curr SJ
$34.95
03-04-022 KI Spring Tensioner - SXR
$37.95
Engine Flush Kit
No tools, clamps or extra
hoses necessary. Back
flushes entire cooling
and exhaust system
instead of forcing sand into cooling
jackets. Use in conjunction with
our salt terminator kit. Simple
and effective. Easy to use. Just push into your aftermarket aluminum
water bypasses. Triple bypass design is designed especially for the
Factory Dry Pipe equipped SXR 800.
06-04-001 Flush Kit - Single Outlet $26.95
06-04-002 Flush Kit - Triple Outlet
$49.95
06-03-101
06-03-102
Battery Box - Aluminum
01-04-601
$69.95
Replace that cracked and worn out stock plastic
battery box with bulletproof Blowsion aluminum.
Each box includes all stock location retaining
clips for easy exchange. Padded bottom.
Direct fit replacement for all years
Yamaha Super Jet, FX1, and Polaris
Octane. Can be fit as replacement to all
Years KAWI 750 and SXR 800 with minor
battery strap modifications.
Handle Pole Pivot Bolt 03-04-143 $54.86
Corrosion resistant, hardened steel and
stainless hardware. Fits all 96+
Yamaha SuperJet.
Cable adaptors are needed to fit stock throttle
cables for Kawasaki 1996 & up. Pre-1986 Kawasaki
models and all Yamaha models need to use 03-05-242.
03-05-241
03-05-242
03-05-243
Brap Strap
04-04-310
$99.95
Strap and secure your hood to avoid
accidental dislodging during freestyle
and freeride maneuvers. Replaces stock
latch assembly. All mounting hardware
included. A must for extreme ocean and
big wave riders. "Cinchable" strap
tension means you pre-load strap
holding power. Fits all SJ, SXR800, FX1,
750sxi and Octane.
BLOWSION Billet Hull Fittings - Vanity and Function!
04-03-001
Bypass Fitting 90-Deg - Black
$12.75
04-03-002
Bypass Fitting 90-Deg - Blue
$12.75
04-03-003
Bypass Fitting 90-Deg - Gold
$12.75
04-03-004
Bypass Fitting 90-Deg - Green
$12.75
04-03-005
Bypass Fitting 90-Deg - Orange
$12.75
04-03-006
Bypass Fitting 90-Deg - Violet
$12.75
04-03-007
Bypass Fitting 90-Deg - Red
$12.75
04-03-008
Bypass Fitting 90-Deg - Clear
$12.75
04-03-009
Bypass Fitting 90-Deg -Yellow
$12.75
04-03-011
Bypass Fitting 45-Deg - Black
$12.75
04-03-018
Bypass Fitting 45-Deg - Clear
$12.75
04-03-019
Bypass Fitting 1/2" 45-Deg BK
$14.95
04-03-020
Bypass Fitting 1/2" 45-Deg CL
$14.95
04-03-021
Bilge Fitting - Strt - Black
$14.60
04-03-022
Bilge Fitting - Strt - Blue
$14.60
04-03-023
Bilge Fitting - Strt- Gold
$14.60
04-03-024
Bilge Fitting - Strt - Green
$14.60
04-03-025
Bilge Fitting - Strt - Orange
$14.60
04-03-026
Bilge Fitting - Strt - Violet
$14.60
04-03-027
Bilge Fitting - Strt - Red
$14.60
04-03-028
Bilge Fitting - Strt - Clear
$14.60
04-03-029
Bilge Fitting - Strt - Yellow
$14.60
04-03-031
Bilge Fitting - 45-Deg - Black
$15.30
04-03-038
Bilge Fitting - 45-Deg - Clear
$15.30
04-03-041
Bow Eye Bushing - Black
$12.75
04-03-042
Bow Eye Bushing - Blue
$12.75
04-03-043
Bow Eye Bushing - Gold
$12.75
04-03-044
Bow Eye Bushing - Green
$12.75
04-03-045
Bow Eye Bushing - Orange
$12.75
04-03-046
Bow Eye Bushing - Violet
$12.75
04-03-047
Bow Eye Bushing - Red
$12.75
04-03-048
Bow Eye Bushing - Clear
$12.75
04-03-049
Bow Eye Bushing - Yellow
$12.75
04-03-152 Blue
04-03-154 Green
04-03-155 Orange
Currently available in Pursuit Green for some models listed as well as Carbon Black
for all models, the Sheathe resists moisture, rot and mildew and is seal coated
for UV resistance. For on the road trailering, all stress seams are overlapped
and double stitched with bar-tacked tie-down loops for securing your
cover against wind flap.
06-06-012
06-06-013
06-06-015
06-06-016
06-06-018
06-06-019
06-06-021
06-06-022
04-03-201
04-03-202
04-03-204
04-03-205
04-03-209
Black
Blue
Green
Orange
Yellow
04-03-207 Red
04-03-208 Clear
Yamaha SJ Billet Exhaust Nozzle
$78.60
Updated carefully for 2008 to fit the new narrower Super Jet bottom
hull. This is one ultra off the hook nozzle. Function and fit are
Blowsion perfect. Vanity rules on these beauties. Blowsion logo
engraved into the design. Cover up that ugly exhaust flange. Also
retro fits to all 96-07 Super Jets. Trick, functional and fashionable.
Works with our new CAS Billet One Way Valve to make a finished
sano look to both sides of your ski.
04-03-251 Black
04-03-252 Blue
04-03-253 Gold
04-03-254
04-03-255
04-03-257
04-03-258
04-03-259
Green
Orange
Red
Clear
Yellow
04-03-157 Red
04-03-158 Clear
04-03-159 Yellow
$124.95
$138.75
$179.50
$148.50
$178.13
$67.22
$69.95
Blowsion Sheathe-Fit PWC Covers
$129.95
Swaddle your stand up watercraft weapon from the elements and prying hands with our new Blowsion woven and stitched polypropylene covers.
Designed with stand-up detail, the Blowsion Sheaths are available for the 4 most popular OEM Stock or heavily (hull)
modified stand-ups being ridden today.
The 3 most outstanding features include extra stitched length in the bar area for extended aftermarket
handlebars, extra material and improved design to accommodate shortened and/or aftermarket
aluminum handlepoles, and a non abrasive interior fabric to protect those high dollar clear
coat custom paint jobs.
SXR Billet Exhaust Nozzle
$78.60
This is one bad ass nozzle to go with Kawi's
bad ass SXR. Function and fit are Blowsion
perfect. Vanity rules on this beauty.
Cover- KAW SXR -All yrs. Black
Cover- KAW SXR -All yrs. Green
Cover- KAW SXi -All yrs. Black
Cover- KAW SXi -All yrs. Green
Cover- YAM SJ 96+ Black
Cover- YAM SJ 96+ Green
Cover- POL Oct -All yrs. Black
Cover- POL Oct -All yrs. Green
KAWASAKI Billet Fuel Cap $58.00
Blowsion Billet. Kawasaki SXR 800,440,550,650 all
models all years KAWI standups. 750 SX and SXI Pro
require fuel door fitting. 04-03-101 Black
04-03-102 Blue
04-03-104 Green
04-03-105 Orange
04-03-107 Red
04-03-109 Yellow
04-03-108 Clear
Billet Yamaha Filler Neck
$49.95
Billet aluminum fuel cap socket for
the Yamaha Super Jet, WaveBlaster, & Wave
Raider. Works with the stock plastic or
aftermarket billet gas caps. 04-03-190
Clear
Includes attached chain.
04-03-191 Black
Handlepole Mount Reinforcing
Plate
03-04-065
$31.95
Fits all models of 1996-2008 Super Jet and all Polaris
Octane. Works with OEM and Aftermarket pole brackets
to disperse the load from aerial and ocean moves. Made
of solid laser cut 1/8 inch stainless steel this is the best
damage control accessory we can recommend for those
riders that shred the big stuff. Installs on underside of
pole mount area using current hardware. Helps prevents
existing cracks from spreading. NOTE: Breather tube
hole may need enlarging on some model pole brackets.
BLOWSION.COM
09
Footwells - Kickers
05-03-005
$149.99
Designed specifically for the Super Jet and Kawasaki SX-R 800, and used exclusively by Ross Champion
on his Factory Blowsion 2008 Yamaha SuperJet and Air Darin Anderson on his Freeride SXR.
These hand-laid, molded fiberglass insets provide extended room in the tray of your ski to
position your feet. Comfortably sized for average to larger feet (size 7- 11+), these footwells
contour to your ankle and also feature a gentle protrusion over the top of your foot
for better locking power. Easily upholstered with either Hydro turf or stitched mat
options. Please feel free to e-mail for more sample install pictures!
Recommended Applications: All Yamaha SJ, Kawasaki SX-R 800, and Polaris Octane.
SXR 800 Front Covers
Shaped and molded for front end durability, our
Kawasaki SXR Nose Cover options ready to roll.
Composite and carbon fiber contruction. Quit
ruining and replacing your $50 OEM Kawi front
plastic bumper and go Blowsion Bulletproof.
Also available is the updated Blowsion Bow Eye
Style replacement.
Footwells - Dawson Digger
05-03-004
$149.99
Comfortably sized for average feet (sizes 6-11), these footwells also
feature a gentle protrusion over the top of your foot for better
locking power. We offer pre-cut mat kits for all applications
of our Digger footwells in both Blowsion Stitched or
Blowsion Hydro-turf material. Our optional stitched
inserts are also available for easy insert upholstering
with either mat option.
Recommended Applications: Yamaha SuperJet (all years),
94-95 FX-1, Kawasaki 750 SX/SXi/Sxi Pro, and Polaris Octane.
05-02-303
05-02-304
05-02-305
05-02-307
05-02-309
Footwells - Klowners
05-03-007
$149.99
Designed especially for the rider who need MAX room in the tray. Comfortably
sized for large to very large feet, the Klowner footwells contour to your ankle
and also feature a gentle protrusion over the top of your foot for better
locking power. NOTE: Most ski installations require modification to the
footwell or the ski on the right hand side of the tray to accommodate
for the internal rear exhaust tube. This may reduce the size of the
footwell slightly in this area. E-mail for more sample install pictures!
Bow Eye - GelCoat
Bow Eye - Carbon
Standard - GelCoat
Carbon Fiber
Smooth OEM Hood
$220.00
$256.00
$220.00
$256.00
$220.00
Blowsion Handhold Nose Cover - Fits OEM SJ Hood
Factory replica composite replacement
with air/water intakes removed and builtin recessed handhold. Matches OEM
hood profile. Bulletproof design does
away with water ingression issues
common with the OEM plastic front cover.
Fits all '96+ newer Super Jets. Allows for more
aggro moves with yet another grab hold to hold onto during
freeriding and freestyle mayhem. Also available in standard
replacement model without handhold.
Footwells - MacClugage Mashers
05-03-006
$149.99
No Cutting of the wide SXR tray required. Designed in conjunction with Pro Kawi rider Chris
MacClugage and Darren Hedlund. Experience the feel of a standard footwell cut out without
having to notch out your SXR tray. 100% race legal.
05-02-266
05-02-264
Handhold Model
Std Model
$249.00
$229.00
Footwells - Recreational
05-03-003
$149.99
The Originals! These hand-laid, molded fiberglass insets provide extended room in the tray
of your ski to position your feet. Will fit and work in all models of watercraft. Flush mount.
Perfect for those riders that do not want any footwell extrusion into the tray.
Install Materials Kit- Footwells/Hull Reinforcement
06-03-113
$31.95
Each kit includes all materials needed for mixing into, and handling, your installation
resin (available seperately). Silica Thickener, mixing cups, brushes, gloves and knitted
fabric cloth for all seams. Also included is our much sought after Blowsion resin tips
and technical install instruction sheet, which is staked full of helpful information
concerning footwell installations, hull reinforcement, and hull repair.
FINALLY-- a kit with the necessary small quantities that
are needed for this kind of install. No need to go buy
$150.00 dollars worth of bulk materials!
Let the itching begin!!!
Foam 2-Part Expanding - Kit
No more home insulation foam in a can. This is the real deal. Marine-quality
expanding foam. Mix equal parts A and B in the supplied mixing cups and
you have waterproof and cured foam expanding in
60 seconds or less. Use a syringe and squirt it
in during footwell or one way valve installs.
Blowsion A and B foam cures through chemical
catalyzation.
06-03-131
06-03-132
06-03-133
SXR Composite Rail Caps
05-04-001
$199.95
A complex fitting piece made with the best fit and features
available. Get rid of those extremely slippery factory
rubber black rails and go composite. Available in gel
coat white and ready to mount and go. Combine
them with either our stitched, or Hydro Turf
SXR mat kits and you are ready to rip.
Blowsion Custom painted Color Rail
Cap Options available for those
with vanity deep in their blood.
10
BLOWSION.COM
2-Part Expanding Pint
2-Part Expanding Quart
2-Part Expanding Gallon
$29.95
$49.90
$119.10
COMPOSITES
'95-Older Super Jet Nose Covers $229.00
Composite replacement nose for 1995 and older Yamaha
Super Jets. Will not break like the factory plastic junk.
Hand-laid composite construction with gel coat
white exterior. With or without recessed fuel
inlet.
05-02-252
Nose Cover Without Fuel Filler*
05-02-250
Nose Cover With Fuel Filler
*Internal fuel filler required
Epoxy (2 Part) Devcon Plastic Welder 06-03-121 $8.95
This is THE glue for all your PWC needs. Bonds to SMC,
Gel Coat, fiberglass etc. Commercial Grade - not available
over the counter. Easy to dispense small tube applicator.
This Blowsion Methacrylic epoxy is your toolbox's best friend!
$249.00
Mid-Mount Kaw 750
Forward-Mount Kaw 750
Mid-Mount Kaw 800
Forward-Mount Kaw 800
Forward-Mount Yam FX-1
Forward-Mount Yam-95
Mid-Mount Yam96+SJ
Forward-Mount Yam96+SJ
Forward-Mount Pol Oct
Q-Hold Universal Mount
Handholds - Carbon Buckets 05-04-201 $49.95
Carbon handhold buckets for creating your own 360 degree
handholds. Flanged edge allows the do it yourself hood
guru to dial in his own Blowsion standard design 360 hood
handhold set.
Remote Fuel Pumop Bracket - Carbon
01-02-556
$59.95
Use this ultra sano 100% carbon fuel pump
bracket when adding remote fuel pumps.
Fuel pump available seperately.
Carbon Fiber Hull Extensions
$239.95
Blowsion hull extensions are constructed of a carbon fiber composite combination. They are epoxy glued
and screwed to the back of the ski. They can be trimmed down in length once installed (4" length
to start- the IJSBA rule is 3.9" max). Our exclusive inward tapered side extension
length is not a "universal" length- once again we manufacture them oversize so our
customers can trim them down to adjust for differing rider weights, and riding style
( ie; more nose pressure / less nose pressure ). Blowsion
hull extensions will fit with any ride plate available on the
market. IJSBA Race legal. Not recommended for
freestyle unless you prefer to keep the nose down.
Sold as a pair. NOTE: Blowsion hull extensions extert too
much nose pressure if you do not match them with the
matching Blowsion side sponson set.
Kawasaki SXi Pro
Kawasaki SXR
92-07 SuperJet, Kawasaki SX
08+ Super Jet
Polaris Octane
05-04-211
05-04-212
05-04-213
05-04-214
05-04-251
05-04-261
05-04-271
05-04-272
05-04-281
05-04-203
Baffle Air Intake Tubes - Separate
05-02-199 $46.95
Add more air to your stock baffle. Sold in sets
of three with compression fit glue-in flanges and
install epoxy.
Resin - SMC - Quart Kit AWMA120 $49.95
Many of todays watercraft are constructed of SMC (sheet molded compound), which
requires a resin formulated for use on SMC. All years Kawasaki 750 top deck.
Bottom hull is SMC up until the SXI Pro model, which is hand laid (repairable w/
SMC Resin or EPOXY) 95 Older Super Jet- Bottom deck is SMC. Yamaha FX1 hood is
SMC. All years Kawasaki JS, 650SX - top and bottom deck is SMC throughout.
Please e-mail BLOWSION for further exclusive reinforcement and repair details.
02-01-301
02-01-302
02-01-351
02-01-352
02-01-381
Drop-In Hand Hold Kits
$139.00
Made from a special blend of composite materials. EASY to install
by following the provided step-by-step instructions. Included in kit:
Detailed instructions and templates, (2) hand holds (left and right),
two-part epoxy glue. 'Q' Hold Universals will mount on any flat
surface of your ski. Standard holds mount in the forward portion of
the hood and mid-mount models are about 12" from the front.
Color: Urethane Gray
(special order colors available)
Hood Baffle Insert for SXR Factory Pipe 05-02-108 $99.95
Use this composite drop in baffle insert to cover the area
removed during install of the Factory Pipe for the SXR. This
is the same insert used by the Factory Kawasaki Race Team.
Each baffle comes with extra air drop tube, install flange
and epoxy glue to move and replace the one
displaced by the pipe install. Explicit directions
include tips as well on how to improve stock
inner hood liner for improved airflow.
Epoxy-Resin/Adhesive
Quart Kit High performance,
gap filling, waterproof, 2 part
epoxy designed to provide
superior results in footwell
installations and hull reinforcement
and repair. 1;1 ratio for easy mistake-free mixing.
06-03-122 2-part Pint
$39.25
06-03-123 2-part Quart $71.95
Blowsion Handhold Nose Cover Fits JK Hood Kit 05-02-265
Lowered front JK Nose Cover with built in 360 degree
recessed handhold. Allows for more aggro moves with
yet another grab hold to hold on to
during freeriding and freestyle
mayhem. Available in Gel Coat
white. Fits all JK Hood Kits and
most aftermarket hood contours
on the market.
Hood Baffle Kits
$289.60
Improves engine airflow while
limiting water intake. Light
weight, sanitary and a must
have for any serious racer,
freerider or freestyler. A costeffective option that allows you to
experience the benefit of an improved
factory system without the high-dollar
costs of a complete aftermarket replacement
hoodkit. Designed to clear all current wet and
dry pipe exhaust systems on the market. Includes
extremely concise instructions that detail removing
the factory hood baffle and ensuing Blowsion baffle
installation.
05-02-104 Kawasaki 750 Baffle Kit
05-02-152 Yamaha FX Baffle Kit
05-02-163 95 Older SJ Baffle Kit
05-02-171 96+SJ Baffle Kit
05-02-172 Kawasaki SX-R 800 Baffle Kit
Gauge Block Off Blaster 05-04-450 $39.95
Get rid of that unsightly gauge window on
the side of your Blaster with this sano
carbon piece by Blowsion.
Fuel Block-Off Kits for 1996+ Super Jet
Kit includes outer plug, interior fuel tank blockoff, and epoxy glue. Available unpainted,
white, black and Yamaha Blue.
05-04-401
05-04-402
05-04-403
05-04-404
Yamaha Blue
Yamaha White
Yamaha Black
-Unpainted-
$66.95
$66.95
$66.95
$57.15
SXR Carbon Dash 05-04-101 $199.95
The ultimate finishing touch to the SXR tray.
Full carbon and full sanitary.
BLOWSION.COM
11
HOOD KITS
SXR RACING Hood Kit- Raptor 05-02-022 $795.00
This Ultra Sano design features rear cowl air intakes and a raised
handlepole channel with dual air scoops. Results are a
superior design that flows air into a sculpted baffle that
fits the SXR dry pipe like a glove. Gel coat white
finish. Special order colors available. Built with
the quality that all Blowsion composite
products are known. Construction is a
hybrid of carbon fiber and stitchbonded fabric. The result is
durability unmatched in the
industry. This strong AND
lightweight work of art is the
Ferrari of race hoods and is
currently being abused by Pro
Kawasaki British World Champ
Jordan Fielder, and South African
World Champ Dustin Motzouris.
SPONSONS
Kawasaki 750 Conversion Kit
Make your Kawi 750 into a Super
Jet and SXR destroyer! Get rid of that
bulky Kawasaki stock or standard aftermarket
handlepole and pole bracket. What are the benefits? Lowered center of gravity, proper body positioning due due to the movement
of the steering system components, and a light weight design that will make your SXi the rage. Designed in in conjunction with Team
Kawasaki Racing, this kit is a must have to be competitve in racing, freestyle or freeride. Due to the multitude of options with the
Kawasaki conversion and what mods may already installed on each ski, please feel free to call or e-mail for further details. The base kit
includes our unbreakable Blowsion 750 billet pole bracket, conversion turn plate and your choice of 3 front cover options. All Blowsion
proprietary items to bolt up an aftermarket aluminum Yamaha Super Jet design handlepole on the market included.
(Handlepole sold seperatlely)
05-02-001 Hood Kit Lustic 750 Freestyle
$1,239.50
05-02-002 Hood Kit Lustic 750 Race
$1,150.50
Choose Nose Cover Option:
A) Bracket Cover Only (works w/ stock fuel door)
B) One Piece Cover
C) One Piece Cover with recessed handhold.
05-02-005 Hood Only - Lustic 750 Race
$876.00
05-02-006 Hood Only - Lustic 750 Freestyle
$995.50
NOTE: Hood seperate Will fit stock pole bracket and stock handlepole.
*NOTE* Additional items required: handlepole, chin pad, pole bolt, pole spring sealed bearing steering kit- CALL/Email.
SXR Freestyle Hood - Raptor
05-02-023
$925.00
Now available- features rear cowl air intakes and custom raised handlepole
channel. Result is a superior design that flows air into a sculpted baffle that
fits both the SXR dry and wet Factory Pipes like a glove. Gel coat white
finish. Special order colors available. Built with the quality that all
Blowsion composite products are known. Construction is a hybrid of
carbon fiber and stitch bonded fabric. The result is durability
unmatched. This strong and lightweight work of art will survive
both flat water and surf punishment. Includes one set of
carbon handholds. Fits with OEM Front cover and
pole bracket as well as aftermarket options.
SXR Lowered Freestyle Kit
05-02-021
$1,110.00
Throw down ready is our SXR Freestyle Hood Kit featuring a
completely redesigned hood and front end. Throw away that
tall and topheavy, bulky OEM Kawi set up and awaken the real
possibilities of the Kawasaki SXR. Taking our years of Kawi
750 freestyle development with Josh Lustic, Darren Hedlund,
Steve Webster and the Factory Kawasaki Racing Team, we
have built a kit that incorporates all the best - lightweight
and lowered freestyle hood, front cover, and all lowered
and machined billet mounting hardware, brackets and
seal. Hood exterior and interior baffle is asymmetrical
in design to accomodate the use of both the Factory
Dry Pipe and the Factory Wet Pipe. Hood channel
has also been opened up and rounded off for
hand clearance during intense moves. All air
intake is from rear of hood.
Water intake is ZERO. Color: Gel Coat white.
NOTE: Kit requires use of the Blowsion
internal Fuel Filler - Single Fuel Filler or the
Dual Fuel Filler. Works with OEM pole
however, best performance and fit is
gained when using the BLOWSION pole
conversion. This beast rocks.
Super Jet ('95-older) Freestyle And Race Hoods
Incredible lightweight design with improved airflow and water drainage that
is unbeatable. Freestyle hood comes with built in 360 degree handholds.
Gel Coat White.
05-02-061
Hood - Moody 95-SJ Freestyle $690.90
05-02-062
Hood - Moody 95-SJ Race
$629.00
Brewtus Hood Kits For '96+ Super Jet
Brewtus Kits come complete with our lowered
Blowsion billet bracket (not a weak and bendable welded metal bracket), the totally advanced
BREWTUS lowered hood with 360 Degree
built-in handholds that allow for
grabbing from both directions and
your choice of one of two contour fit
front cover options. The Brewtus race
hood has improved ram air induction and is
constructed of the lightest weight carboncomposite materials we can find. No handholds
included. Gel coat white.
12
BLOWSION.COM
05-02-071
05-02-072
05-02-073
05-02-074
05-02-075
Brewtus 96+ SJ Race
Brewtus 96+ SJ Freestyle
Brewtus SJ AAR Nose
Brewtus SJ Low-pro
Brewtus SJ Race
$985.05
795.05
1,185.00
1,185.00
1,185.00
Hood Kit - JK Freerider
Constructed of a carbon/composite laminate construction,
this beast will survive both freeride and freestyle punishment.
The JK hood channel has been widened and rounded out
to prevent hand and finger jamming damage during aerial
grabs or flatwater antics. The 'JK' Kit come complete
with our lowered Blowsion billet bracket in single or dual
breather option, (not a weak and bendable welded metal bracket)
and oversize handlepole breather tubing. Available with single set
360 degree handholds, multiple sets, or even without built in
handholds. Now also available with handhold front cover option.
Your choice. Choose from Lightweight flatwater Freestyle
construction/weight, or Heavy Duty Surf Impact Protection (keep
in mind the stock Yamaha hood for the Super Jet
weighs 22-24lbs). Hoods are shipped Gel Coat
White. Custom options listed below.
05-02-081 JK Hood Kit w/2 Handholds
$999.95
05-02-082 JK Hood Kit w/4 Handholds
1,093.75
05-02-083 JK Hood Kit w/6 Handholds
1,187.50
05-02-084 JK Hood Kit w/8 Handholds
1,281.25
05-02-085 JK Hood Kit No Handholds
945.00
05-02-086 JK Hood Kit w/2 Handholds - Dual Bracket
999.95
05-02-087 JK Hood Kit w/4 Handholds - Dual Bracket
1,093.75
05-02-088 JK Hood Kit w/6 Handholds - Dual Bracket
1,187.50
05-02-089 JK Hood Kit w/8 Handholds - Dual Bracket
1,281.25
05-02-090 JK Hood Kit No Handholds - Dual Bracket
945.00
Yamaha FX-1 Freestyle Hood
05-02-051
$628.50
The FX-1 Freestyle Hood is 1/2 the weight of the stock hood. Inner baffle
is set up to provide easy evacuation of water through the rear air
intakes. Recessed 360 Degree Handholds allow for grabbing from
all directions, not just back towards the riders position. Virtually
eliminates all water ingestion from subs and nose stabs.
Tubbie Destroyers
New for 2010!
Built and shaped specific to the unique hull shape of each watercraft, the Tubbie Race Destroyer is fully removable
with an average 10 minute per side install! Interested in wanting to experience the Tubbie handling improvements
but a little nervous about screwing and gluing into your beautiful machine? Composite backed, the Destroyers do
not use screws for installation. Three(3) machined billet and stainless couplings per side are included with each set
of Destroyer sponsons- and that is all that is required for hardware install! This is the ultimate in customized front
sponson set ups and allows the rider to adapt to different riding conditions and test with ease. Designed exclusively
for each model hull shape, these sponsons put to bed and DESTROY the lame copy cat front sponson posers out
there.
With this Blowsion patented two-plane Tubbie technology we have slimmed, trimmed and re-defined the Tubbie
shape specifically to accommodate the hull footprint these specific skis have. This allows the hull to sit slightly
deeper in the water, while still giving the ski the well known benefits of the Tubbies aggressive turning, hook up and
bow buoyancy. This, all without creating too much floatation and side to side instability at mid speeds. We have
found with the addition of the Tubbie Destroyers the ski is much less fatiguing to the racer as it becomes easier to
maneuver around the course on long motos or Freeride sessions.
Like all the Tubbie models offered by Blowsion, the Destroyers are a win-win benefit to any rider or ski. Constructed
specifically with the aggressive rider in mind. Each Set includes detailed installation instructions, fast set epoxy, and
all stainless and billet aluminum mounting hardware. Patent Pending #60/509.114.
02-01-010 Tubbie Destroyer Side Sponsons - Removable- KAWI SXR-Hydrospace (IJSBA Legal)
$339.20
There have been only a few inherent problems with racing the Kawasaki SXR and S4 from Hydrospace. The
challenge has been keeping the ski hooked up in the turns, and keeping the nose from submerging. Very small
complaints against an incredibly well designed bottom hull design.
02-01-013 Tubbie Destroyer Side Sponsons - Removable- Yam SJ 1996-2007 (pending IJSBA Approval) $339.20
With the Blowsion patented two-plane Tubbie technology we have severely lengthened and re-defined the Tubbie
Destroyer two-plane shape specifically to extend the wider footprint needed for Freeriding wave turns and barrels
on the Super Jet. This allows the rider to update his 07 and older SJ hull to ride more agressivley in the water
emulating the 2008+ Super Jet lower hull design, while still giving the ski the well known benefits of the Tubbies
aggressive turning, hook up and bow buoyancy.
02-01-012 Tubbie Destroyer Side Sponsons - Removable- Yam SJ 2008-Current (IJSBA Legal)
$349.95
Racing, Freeriding and Freestyling the new improved 2008+Newer Super Jet hull design has been a thrill for anyone
that was frustrated by the 11+ years of no changes or improvements of the SJ by Yamaha. With the addition by
Yamaha in 2008 of the Tubbie shape incorporated into the OEM hull, we had very few complaints against an
incredibly well designed bottom hull design (especially since we take full credit!). What we have found was the 08+
Marine Sealant - 240ML Tube
The key to installing Tubbie I/II/III Sponsons and other composite accessories on your
watercraft. Easy-to-use tube fits a standard caulking gun. Fast-set formula dries tack
free in 90 minutes and delivers extremely tough bonds. 920 Fast Set is the choice for
all Blowsion sealing, bonding, or potting applications, especially through-hull
fittings, joints, bilge pump mounts, etc. Sandable and paintable after
cure. Non-yellowing and UV resistant. Note: Sponson
installation requires two tubes. Sold each.
06-03-135
White
$14.50
06-03-136
Black
$16.50
Tubbie I, II, and III Sponsons - Universal Fit -Screw On
Now for 2009 with the exciting introduction of our removable bolt on Destroyer Tubbies Sponson line we have
streamlined production and reduced cost of the original breakthrough screw on permanent Tubbies! The new price
is now reduced from $279.00 to the lower price of $249.00 for the popular Tubbie I, Tubbie II and Tubbie III's. These
three universal-fit models will fit all stand up models on the market.
To clarify the difference between the models, what we have done is recessed a concave shape into the bottom
leading edge of the Tubbie II sponson to create a harder and sharper edge for turning and tracking. The Tubbie II
grips better in turning and is more stable in straight line high speed riding. The Rec/Freeride model Tubbie I is very
stable, but has some nose wandering at mid throttle due to the curved chine riding back and forth on the bow wave.
This is very beneficial in freeriding as the ski is able to be more forgiving and reacts better to a variety of directions
and water flow angles.
The Race Model Tubbie III's are more aggressive, but less forgiving riding over the tops of waves diagonally. Tubbie
MIII is called the SlimPhast Sponson due to its sleek and fast design shape. This is not a cheap plastic copy, but the
real deal with real development, durability and design incorporated from years of testing and riding.The Tubbie MIII
offers the Kawasaki SXR and Hydrospace S4 racer (and hardcore rec shredders) a front sponson model that is
tailored to fitting these two craft most beneficially at the lowest pricepossible. Patent Pending #60/509.114.
02-01-002
02-01-003
02-01-004
Tubbie I Side Sponsons - Surf/Rec Freestyle - Patent Pending - All Models - Screw On
Tubbie II Side Sponsons - Race/Rec - Patent Pending - All Models - Screw On
Tubbie III Side Sponsons - Race HYBRID - Patent Pending - All Models- Screw On
$249.00
$249.00
$249.00
BLOWSION.COM
13
Side Rail Moldings
Made out of injection molded flexible urethane. Attaches
to your watercraft with its own adhesive backing. Each kit
includes special pre-wipe cleaner to promote maximum adhesion
and durability.
04-02-301
04-02-302
04-02-303
04-02-304
04-02-305
Side Molding - 1 1/2" Black
Side Molding - 1" Black
Side Molding - 1 1/8"" Chrome
Side Molding - 5/8" Black
Side Molding - 5/8" Chrome
M AT S / T U R F
Hydro-Turf Sheet 36" x 50"
$59.95 per sheet
Choose from standard straight
groove, diamond groove, or
the new waffle groove sheets.
Available in all colors listed.
Please visit Blowsion.com for
all color and model options.
$54.90
$49.99
$59.99
$49.99
$49.99
MAT/UPHOLSTERY OPTIONS
Glue On Traction! Each kit Includes bottom, sides, dash, and undermat.
Available for all stand up watercraft as stock replacement kits, or
for covering Blowsion Kicker, Digger, Masher, Klowner or Recreational Footwells.
Our footwell kits feature one piece bottom mats- no extra pieces to
fight with gluing into the footwell. Your choice of Stitched upholstery
or Hydro-Turf (TURF) straight and diamond grooved traction mats.
Massive color selection to choose from.
Gain the secret Pro racers edge. Get rid of those ill-fitting
OEM side moldings that scrub speed and cause poor under the
rail water flow during racing conditions. These are the same
1.75 inch wide moldings used by the Kawasaki Racing Team.
Cost is almost 50.00 dollars less than OEM Kawasaki replacements.
Will not warp in the sun or heat. All pricing listed is as
a set of two, pre cut, no holes are drilled. Stand up kits
fit all years Kawasaki SXR and 96 Newer Super Jet. Runabout
kits fit all STXR and all 1.75" bond flange PWC on the market.
04-02-308
04-02-309
Side Molding- Runabout
Side Molding- Stand-up
Please visit Blowsion.com for all color and model options as there quite simply
is just too many to fit in this catalog!
$129.95 on up for Hydro Turf Mat Kit Options.
$189.95 on up for sticthed mat kit options.
$195.00
$130.00
Blowsion Mat Glue
"Blow Goo" to the rescue. Use this solvent-based contact adhesive with
your Hydro Turf or stitched mat kit and never worry again about your
mats coming loose. This is the NASTIEST adhesive we could find.
Not your ordinary off the shelf laminate glue, this is a special BLOW GOO
that when used in conjunction with our seam
edge super glues, and explicit instructions
guarantees Y3K permanent mats!
Kick Wedge - Hydro-Turf
Add a kick tail to your watercraft
bottom mat area with this 1"
wedge. When installed under
the traction mats, some models
of watercraft may require an
extended bottom mat.
CARBON COMPOSITE CHINPADS
Ultra clean shaped and formed carbon backing with billet mounting ears and stainless fasteners covered
with closed cell foam. Upholstered by your choice of a 2-color combo "glove fit " BLOWSION logo cover
(15 color combos in stock- others available special order-7-10 days) Throw out that waterlogged factory
roach!
1996+ SJ,FX1,Octane and KAWI-SXR/Sxi Pole Conversion
1995- SJ
All Years Kaw 750/800 OEM Pole
$259.95
$259.50
$214.95
06-03-141
06-03-142
04-02-345
04-02-347
04-02-351
04-02-352
Hydro Turf Kick Wedge
Hydro Turf Lifter Wedges
Handlepole Shock Pad - Yam Hydro Turf
Handlepole Shock Pad Kawasaki 750/800
$19.95
$15.95
$15.95
$15.95
04-02-335 Dakine Supremo Footstrap
04-02-336 Dakine Proforma Footstrap
04-02-337 Dakine X-Lace Footstrap
04-02-338 Dakine Hrdwr kit - less glue
04-02-339 Dakine Hrdwr kit - with glue
NOTE: Price listed is for one Dakine Footstrap.
14
BLOWSION.COM
$25.95
$20.95
25.95
$9.95
$18.75
Super Glue - Rubber Toughened
A rubber-toughened cyanoacrylate that forms superior shock
resistant bonds to non-porous surfaces (ski hull). This material
has added flexibility for the bonding of metals, fiberglass, rubber,
carbon-fiber and other advanced materials. This is the FINAL answer
for keeping your Hydro Turf or rubber based mat kit edges stuck
down. Use to seam edges permanently. Every tool box should have
a bottle for riding days. Once dry it can be sanded just like Hydro Turf
edges for seamless perfection. Also the best formula we have found
for bar grips. (Also recommend accelerator for the best application)
Side Rail Hydro Turf Kit
Improve traction on the side rails of your ski with our custom fit rail
covering kit. All kits constructed of diamond Hydro Turf unless you
special request straight molded. Also available the widening
"extension" kit for added grab area.
04-02-321
04-02-322
04-02-323
04-02-324
Siderail Extension kit Kaw750/Yam SJ
Siderail Extension Kit Kaw 800
Siderail Turf Kit Kaw SX-R 800
Siderail Turf Kit Kaw750/YamSJ
$9.95
$14.65
Size- 5.5" x 18" x 1" height.
BLOWSION CHINPAD COVERS Available separately for $39.95-44.95
(Massive color selection. Call or e-mail)
DAKINE Footstraps
Dakine Freeriding foot straps can be easily adjusted on or off the water for all foot sizes and riders.
Great for riders looking for that Joe Kenney or Pierre Maxient wave-shred style of surfriding.
The new X-Lace model has a unique pull tab adjustment system that is not
affected by salt and sand. The X-lace is considered the most versatile of
the DAKINE line and will work with whatever foot size and foot
covering is used. The Supremo is best designed for riders who wear
booties or riding shoes. Each model includes a 3-hole pattern to
accomodate single or double insert installs. The Profrom
footstrap is the most flexible of DAKINE model footstraps
and is commonly the most preferred for riders who ride
barefoot. Includes a 3-hole pattern to accomodate
single or double insert installs.
All Good! Double Backy anyone?
Mat stick- P. Kit
Mat Stick - Q. Kit
$139.95
$139.95
$52.95
$44.95
06-03-151
06-03-152
06-03-153
06-03-154
06-03-156
06-03-161
06-03-162
Kick Plate - Aluminum
Permanent fix for keeping your bottom mat in place during big wave
action. Special Blowsion contour bent L-shaped aluminum plate with
attaching hardware. Guarantees that you will not
be dealing with loose tray mat due to the glue
not holding in this compound angled area.
04-02-342
04-02-343
Kick Plate - Yam/Kaw
Kick Plate - SX-R
$27.95
$27.95
Super Glue - Extra Thick - 1oz
Super Glue - Extra Thick - 2oz
Super Glue - Extra Thick - 8oz
Super Glue - Clear Rubber- 1oz
Super Glue Black Rubber 1oz.
Super Glue Accelerator - 2oz.
Super Glue Accelerator - 8oz.
Skeekeeper Tie Downs
The perfect solution for securing your aquatic machine. Short length
nylon strap with locking pin slips in and locks to the rear
eyelet of your watercraft. Simple and secure.
Available with one 'S' hook or dual 'S' hooks.
Sold one per package.
06-06-101 SkeeKeeper Double
$23.95
06-06-102 SkeeKeeper Single
$19.95
$6.10
$11.00
$32.99
$6.65
$8.80
$5.49
$12.10
BLOWSION.COM
15
PERFORMANCE
Blowsion 760cc Big Bore Motor Build Package - OPTION 1
Email for Cur r ent Cos t Quot e
Yamaha 760cc manifold bolt s 8 x $4.25 each
Email for Cur r ent Cos t Quot e
Blowion Ult imat e Bas e Gas k et . 020
Email for Cur r ent Cos t Quot e
Pr o-X 84mm Pis t on k it 2 x $109.65
Email for Cur r ent Cos t Quot e
Pr o-X W r is t Pin Bear ing 2 x 19.95
Email for Cur r ent Cos t Quot e
Yamaha OEM Cr ank s haft s eal Kit
Email for Cur r ent Cos t Quot e
L abor : (Machine cas es for big bor e Sleeves )
Email for Cur r ent Cos t Quot e
Blows ion Fr eer ide Cylinder Por t ing (L abor )
Email for Cur r ent Cos t Quot e
Total Price
This big bore use an OEM 760 cylinder rather than starting with an 701cc clinder.
This kit is an outright purchase price and requires the use of an aftermarket head
with a dome size of 84mm to 85mm. Additional modifications are required to
engines case for larger sleeves (boring) prior to assembly. NOTE: Cost is estimated
depending on condition of supplied engine components.
Email for Current Cost Quote
Email for Cur r ent Cos t Quot e
Email for Cur r ent Cos t Quot e
Blowion Ult imat e Bas e Gas k et . 020
Email for Cur r ent Cos t Quot e
Pr o-X 84mm Pis t on k it 2 x $109.65
Email for Cur r ent Cos t Quot e
Pr o-X W r is t Pin Bear ing 2 x 19.95
Email for Cur r ent Cos t Quot e
Yamaha OEM Cr ank s haft s eal Kit
Email for Cur r ent Cos t Quot e
L abor ; (Ins t all new big bor e s leeves ) 2 x $285.00
Email for Cur r ent Cos t Quot e
L abor : (Machine cas es for big bor e Sleeves )
Email for Cur r ent Cos t Quot e
Blows ion Fr eer ide Cylinder Por t ing (L abor )
Email for Cur r ent Cos t Quot e
Total Price
Email for Current Cost Quote
This Big bore kit utilizes the an OEM 701 cylinders which provides optimum bottom end performance. This kit is an
outright purchase price and requires the use of an aftermarket head with a dome size of 84mm to 85mm. Additional
modifications are required to engines case for larger sleeves (boring) prior to assembly. This kit can also be done with
customer providing there own cylinder in which case you would be able to reduce the cost of the kit by $592.51 (cost of a
701 cylinder core). NOTE: Cost is estimated depending on condition of supplied engine components.
Price
Kawas ak i OEM SX-R Cylinder
Email for Cur r ent Cos t Quot e
Blows ion Ult imat e Bas e Gas k et . 020
Email for Cur r ent Cos t Quot e
Blows ion SS Ex haus t manifold gas k et
Email for Cur r ent Cos t Quot e
Blows ion Big bor e Sleeves : 2 x $129.95
Email for Cur r ent Cos t Quot e
W is eco 84.00 mm Pis t on k it 2 x $150.03
Email for Cur r ent Cos t Quot e
W is eco W r is t Pin Bear ing 2 x 19.95
Email for Cur r ent Cos t Quot e
Machine Cylinder for Big bor e Sleeves /Bor e
Email for Cur r ent Cos t Quot e
Machine Cylinder for JSU s t yle gir dle head k it
Email for Cur r ent Cos t Quot e
Blows ion Fr eer ide Cylinder Por t ing
Email for Cur r ent Cos t Quot e
Total Price
Email for Current Cost Quote
Above kit requires aftermarket billet head and dome change from OEM Kawasaki. Customer choice of pump gas or race gas settings.
NOTE: Cost is estimated depending on condition of supplied engine components.
Blowsion Yamaha 850cc Big Bore Cylinder
Email for Cur r ent Cos t Quot e
Email for Cur r ent Cos t Quot e
Blows ion Ult imat e Bas e Gas k et . 020
Email for Cur r ent Cos t Quot e
Blows ion Big bor e Sleeves : 2 x $129.95
Email for Cur r ent Cos t Quot e
Pr o-X 89.00 mm Pis t on k it 2 x $175.00
Email for Cur r ent Cos t Quot e
Pr o-X W r is t Pin Bear ing 2 x 19.95
Email for Cur r ent Cos t Quot e
Machine Cylinder for Big bor e Sleeves /Bor e
Email for Cur r ent Cos t Quot e
Blows ion Fr eer ide Cylinder Por t ing
Included in Cylinder Machining
Yamaha 850 Case Mod includes Blowsion Case Kranker
Email for Current Cost Quote
Total Price
Email for Current Cost Quote
Above kit requires aftermarket billet head and dome change from OEM Yamaha. Customer choice of pump gas or race gas settings.
NOTE: Cost is estimated depending on condition of supplied engine components.
Blowsion Machining Costs
Standard Bore Engines (KAWASKI & YAMAHA)
Cylinder, bore, hone & chamfer (per hole) This is to remove .010" - .040" as required
Price
$60.00 +
$30
$420.00 +
$90.00
$150.00 - $300.00
$30.00
$65.00
$135.00 - $175.00
$300.00-350.00
for most overbore configurations.
Precision Hone Cylinder - each
Clyinder Porting (Freestyle, Freeride & Race Applications)
Cylinder Machining for Kommander head
Crankcase Porting
Cut Domes ea
Nozzle Bore
True & Weld Crank shafts (twin,triple)
Complete motor teardown, rebuild & re-assembly (twin)
Big Bore and Billet Cylinder Engines (KAWASKI & YAMAHA)
Cylinder, bore, hone & chamfer (per hole) This is to remove .010" - .040" as required
for most overbore configurations.
Clyinder Porting (Freestyle, Freeride & Race Applications)
Yamaha Re-sleeve cylinder and match existing porting (per hole)
Yamaha Re-sleeve cylinder and freeride, freestyle or race porting (per hole)
Kawasaki Re-sleeve cylinder and match existing porting (per hole)
Kawasaki Re-sleeve cylinder and freeride, freestyle or race porting (per hole)
16
Yamaha Big Bore 850 Port & Re-sleeve
Yamaha 850 Case Mod includes Blowsion Case Krank er
Bore, Trench, and Fill w/ Epoxy includes Blowsion Case Kranker (for Stroker
Crankshaft)
Crank Case Machining for Big Bore Sleeves
Port Billet Cylinder (Freestyle, Freeride & Race Applications)
Machine Exhaust Manifold
Machine Power Valve Blades
BLOWSION.COM
06-01-020
06-01-021
06-01-024
06-01-025
06-01-027
06-01-028
Horsepower and Performance:
The 2 words are a bit misleading and confusing when it comes to watercraft and their inherently inefficient impellers and
pumps. The main facet we have noticed with our customers and pro riders is that neither word means much when your
are sitting idle on the beach due to mechanical nightmares. At that moment of possible wife beating or nervous
breakdown, durability and reliability really come to mind as the key words! With that seared foremost into our minds, the
Blowsion tech crew has put together the following engine package options. These are the same set-ups that you will find
in our World Champion Pro Freeride domination, as well as the local lake and ocean rippers.
Yamaha 760 Big Bore:
Always a favorite with the freerider and freestyle crowd, the Blowsion 760 big bore uses our freeride sleeves that receive a
full cnc port job before the liners are even installed. We match the cases, true and weld the crank and finish up with
precise hand grinding for one of the most impressive 760s you have ever ridden. We offer this package ranging from
stock stroke to 6 mil stroker. Call or email for further details and costs.
Price
Yamaha OEM Cylinder
Blows ion Cylinder Spacer
Price
$60.00 +
$420.00 +
$250
$350
$300.00
$410
$725
$625
$695
$110
$425.00 +
$40.00
$40.00
06-01-015
06-01-010
Standard One Way Valve Drain Kit
Unlike scupper valves that mount on the exposed exterior of your ski,
our one-way valve kits install "into" the rear 1/4 of your PWC end caps.
This keeps conitnual water pressure on the inside of the tube, keeping
the valve shut when the ski is floating.
Price
Yamaha OEM 701 Cylinder
Blows ion Big Bor e Sleeves 2 x $129.95
Blowsion KAWI 840cc Big Bore Cylinder
Duckbill SXR 800 - Billet
Eliminates water via the OEM
Kawi SXR drain plug orifice at
the rear of the ski. This is the most
economical way to keep the SXR engine
compartment dry.
Price
Yamaha OEM 760 Cylinder
Blowsion 760cc Big Bore Motor Build Package- OPTION 2
VA LV E S / B I L G E
Yamaha 850 big bore:
This is a motor package that was designed to fill the gap between the 760 big bore and the billet stroker in both cost and
performance. We are able to offer this package affordably with the ability to run any number of aftermarket billet head
and dome combinations. In addition, we can also offer this cylinder set up ranging from a stock crank to a 5 mil stroker
(908cc in a stock cylinder). For added durability, we reinforce all of our 850s and strokers with our Blowsion Case Kranker.
The resulting cases are far stronger than stock and are ready to accept whatever horsepower and abuse is thrown at
them. All porting in both cylinders and cases are done with a CNC machine and hand finished to attain the highest
standards. This gives us the ability to make calculated and interpretive changes for each customers performance
demands. Call or email for further details and costs.
Dasa Strokers:
We have had great success with the Dasa product line and don't feel the need to reinvent the wheel. We offer the whole
line from stock stroke non power-valve cylinders to 10mil power valve monsters. Please note that all of our big bore and
stroker applications get our crank case reinforcement and cnc case porting. Call or email for further details and costs.
One-Way Valve - Valve Only
One-Way Valve Kit - Standard
One-Way Valve Kit - FX-1
One-Way Valve Kit - Standard SXR
One-Way Valve Kit Pump Dump
One-Way Valve Kit - Pro Finish
Duckbill One Way - Kawasaki
Replacement Rubber Bill only
$35.00
$21.85
CAS One-Way w/ Blowsion Billet
Exhaust Outlet Installed
(outlet sold seperately)
$29.90
$99.95
$107.50
$99.95
$99.95
$99.95
Bilge Switch - Start Stop Switch Mount
These sano switches mount directly to the
bottom of the OEM start/stop switch
housing.
06-01-213 Start/Stop Mount Kawi
$74.95
06-01-214 Start/Stop Mount Yam
$74.95
Blowsion CAS Billet Aluminum One Way Valve Scupper 06-01-022 $161.50
The new CAS flow valve design prevents water getting in during tail stands, wave
jumping, or all-out buoy shredding. The new billet flange assembly is the
premium design setup and allows use of the Blowsion billet exhaust outlet
so vain riders can sanitize both sides of the rear of their watercraft. The
aluminum, rubber, and injection molded construction of the Blowsion
one-way valve assembly along w/ the recessed internal mounting
results in a bulletproof set-up. Fits all years Super Jet, KAWI
750 and SXR 800, KAWI 650, and Polaris Octane. Each preassembled kit includes explicitly detailed instructions,
two Blowsion molded glue able urethane bulkhead
and ski flanges for leak less sealing, recessed
one-way flow valve, special flex tubing (allows
for off center mounting unlike straight PVC
tube scupper systems) mounting epoxy
and stainless fasteners.
NOTE: recommend Blowsion
2-part mixing foam pint kit
with install.
Bilge Pump Hose - Black
06-01-301 Bilge Pump Hose - 3ft
06-01-302 Bilge Pump Hose - 10ft
Handlebar Mount Bilge Switch
Fits any watercraft handle bars on the market.
06-01-212 Universal Bar Mount
$74.95
Versiplug
The high performance, reliable, selfbailing drain plug replacement made
specifically for your Yamaha and Kawasaki PWC.
06-01-040
06-01-041
06-01-051
Original - Yamaha
$29.95
Versiplug Original - Kawi $29.95
Versiplug R (Racer) Black $49.95
Blowsion CAS Billet Aluminum Flange Only 06-01-023 $99.15
New 2009 CAS billet flange available separate. Available for riders
wanting to use the end flange only for custom scupper installations etc.
The new billet flange assembly is the premium design setup and allows
use of the Blowsion billet exhaust outlet so vain riders can sanitize both
sides of the rear of their watercraft. Fits all years Super Jet, KAWI 750 and
SXR 800, KAWI 650, and Polaris Octane.
Rule 500 GPH Bilge Pump
06-01-001
$28.95
The workhorse pump for all standup applications. 12 volt.
3/4 discharge. 6 foot wire leads. 2.5 amp fuse. Submersible
and ignition protected. Gas resistant retainer base with
screws for mounting anywhere.
06-01-311 Bilge Pump Strainer Base Only $8.95
$6.00
$12.00
Bilge Switch - 3 Position Rotary 06-01-201 $39.95
Our Waterproof bilge switches are corrosion resistant
and have withstood the most abuse we can give them.
Dash mountable and easy to install.
Bilge Switch Cover
06-01-310
$35.25
Protect your ultra sano BULLETPROOF Blowsion rotary bilge
switch with this sanitary powder coated black aluminum
switch shield. No more broken off knobs stuck between your
toes during aerials. All mounting hardware included.
(Switch sold seperately)
Bilge Pump Mounts
These Blowsion designed and manufatured brackets locate the bilge
pump(s) within millimeters from the base of the ski hull.
Easy installation- no messy adhesives or glue!
06-01-101
06-01-102
06-01-150
06-01-151
06-01-152
06-01-153
Dual Mount Kaw
Single Mount Kaw
Single Mount Yam SJ 94
Single Mount FX1
Single Mount Yam SJ 95+
Dual Mount Yam SJ 95+
$59.90
$46.95
$46.95
$46.95
$46.95
$58.35
BLOWSION.COM
17
HANDLING
(AND A FEW RANDOM ACCESSORIES)
Blowsion Stainless Steel SJ Intake Grate
02-01-170
$219.25
If you want to stay hooked-up in Race or Surf conditions alike then try the Blowsion
Yamaha Super Jet Intake Grate. Made from high-quality stainless steel this makes it
virtually indestructible. The days of cracked or bent aluminum intake grates will be
behind you, along with your slower scooping buddies! The mild weight increase
of the stainless intake grate construction provides a lower center of gravity and
keeps more ballast down low where you need it so you stay glued to the water
in all conditions. Unreal performance gains on the new 2008 Super Jet for
racers as well as freeriders. Flat-water freestylers can count on the same exact
performance as the popular aluminum Worx 201 and 205
grate in indestructible stainless construction. Fits
all years Super Jet.
Yamaha Billet SJ Hood Finger Pull
Replaces factory plastic hoof clip on all
96+ Super Jets. Stellar function and look!
Bright dip anodized.
04-03-353 $24.95
750 SXI Dashboard Control Plates
$25.95
Direct replacement for OEM plastic plates. Brushed finish.
Bright dip anodized.
04-03-301 Choke Plate
04-03-302 Fuel Selector Plate
04-03-303 Primer Plate
04-03-304 Rotary Bilge Switch Plate
Billet Yamaha SJ Dash Knobs $25.95
Sanitize the dash of your Yamaha controls
with these Blowsion Billet dash knobs.
Replaces the OEM plastic knobs.
04-03-352 Fuel Select
04-03-351 Choke
Kawasaki 800SXR rear sponson
Manufactured from 6061-T6 Aluminum and anodized for corrosion
protection. Supplied with all stainless steel hardware needed
for installation. Designed to be a direct bolt on part.
This sponson was designed to not allow the boat to slide
through he corners.
02-01-020 Rear Sponsons SXR
$119.95
750 SXI Primer Relocate Brackets
Cleans up dashboard on SXI. Fits all 750s
without oil injection. Positions primer under
hood with shortest primer routing. Stainless.
01-02-416 Standard
$17.60
01-02-417 FPP Dry Pipe $17.60
Fuel Door Lock Trim Kawasaki 750
Dress up your front fuel door with this
sano billet piece.
Fits all years KAWI 750.
Bright dip anodized.
04-03-306 $37.95
Kawasaki Dash Knobs
Direct replacement for OEM plastic knobs on 750/800.
Bright dip anodized.Can be used with both 750 and 800 SXR
(Shown with 750 backing plates)
04-03-305 $25.95
SXR Skat Trak Scoop Grate
$239.95
The Skat Trak stainless steel Scoop Grate for the Kawasaki
800 SXR stand up personal watercraft is designed for maximum
efficiency and performance. Both models shown here are made out
of Stainless Steel and utilizes the twin scoop, top loader design. The
second scoop has been relieved a bit to maintain peak top speed in smooth
water conditions. The production change in the 800 SX-R intake grate was made to work
with the Skat Trak Aluminum Kawasaki 800 SX-R Pump Shoe. Bulletproof construction and performance.
02-01-121 Skat-Trak Intake Grate SXR
$239.95
02-01-122 Skat-Trak Intake Grate SXR Cut
$239.95
Ride Plate - Carbon 2008+ SJ Race
02-01-242
$239.95
Unreal. All we can say. Tested and updated for the unique
2008 SJ's. This dual channel recessed bottom design race
plate is set up in full length for racing with the 2008 SJ.
Blowsion CF Ride Plate - Kenney Lip Ripper - Yamaha $239.95
Designed with feedback exclusively from Joe Kenney, Randy
Laine and Clay Cullen this is quite simply the coolest ride
plate for Super Jets available. For surf shredding go with
the D cut model. This dual channel recessed bottom
design plate is also available in full length for use as an
excellent flatwater performance plate for 96-2007 SJs.
02-01-245 96-07 SJ D-cut
02-01-246 96-07 SJ Full
Blowsion iZZneLL Twister nozzle
Available for 1990+ model year Yamaha Super Jet. Allows
additional throw on steering nozzle and multiplies turn
ratio and radius. Does not damage or tweak that expensive
steering cable. All hardware and instructions included.
Minor pump modifications requried.
02-02-417
02-02-418
Ride Plate - Carbon 2008+ SuperJet D-Cut Lip Ripper
02-01-241
$239.95
Ride Plate - Carbon 2008+ SJ "Midi" 02-01-243 $239.95
Tested and updated for the unique 2008 SJ's. This dual channel
recessed bottom design race plate is set up in mid length for
all around recreational and freestyle riding with the
2008 Super Jet.
18
BLOWSION.COM
Blowsion CF Ride Plate - Kawasaki SXR
$239.95
Unique reverse "D" cutout generates wave carving turns to die for.
Also available for the SXR Racer is the Jet Ski Unlimited Race Version
of the Lip Ripper. This is the same plate used by Pro Dustin Motzsouris
is to win the Pro Ski World Championships.
02-01-208 D-Cut
02-01-209 Motz Race
Blowsion CF Kenney Lip Ripper Plate - Blaster
$239.95
Designed with feedback exclusively from Blaster Pros Jimmy Visser and Pierre
Maxient, this is quite simply the coolest Blaster ride plate for surf shredding
available. Unique reverse "D" cutout generates wave carving turns to die
for. Not an understatement. This dual channel recessed bottom design
plate is also available in untrimmed length for use as an excellent
flatwater performance plate.
02-01-248 D-Cut
02-01-249 Full
Twister - Bracket Only
Twister Complete Nozzle exchange
$42.95
$92.95
Thrust Force Pump Core / Hub Kit
Emulate the performance of a Magnum Pump without the additional weight and expense.
Transform the OEM Pump into a high performing large hub,
high-pressure axial flow design inexpensively with the
Blowsion Large Hub Thrust Force Pump Cone Kit.
The Thrust Force Pump kit will drastically increase
pump hook up and rear end traction. This
innovative design allows impeller changes to be
made easily in minutes. The Anti-cavitation rear cone
length is tunable with kit supplied spacer shims which
allows custom peak RPM tuning for any brand or
pitch of impeller. Better wave crush bottom end,
hook up and all around pump performance.
02-02-400
02-02-403
Blowsion Force Pump Cone Yama
Blowsion Force Pump Cone SXR
$369.00
$319.04
Note - the Blowsion Yamaha pump cone will work with only a
Skat Trak C-75 style impellers or Solas mag hub style
impellers. It is not compatible with the stock impeller or
smaller hub impellers.
Pump Cone
$49.50
Designed with the freestyler in mind, the freestyle pump
cone allows the engine to rev faster for the big tricks.
Its small size lets a large volume of water move through
the pump with less restriction than with the stock tailcone.
This gives you more low end thrust for bigger air. Works
great with a bored out stock nozzle to help provide even
more low end. Detailed instructions and hardware included.
Yamaha Magnum Pump - Skat Trak
Sold Outright- Skat-Trak 140,144 and 148mm Magnum Pump
12-Vane Std and Set Back models. Fits all years Super Jet and
Blaster. Includes one SKAT TRAK Impeller.
02-02-001 Skat Yam 12v S/B Mag Pump 140
$2,075.00
02-02-002 Skat Yam 12v Mag Pump 140
$2,075.00
02-02-003 Skat Yam 12v Mag Pump 144
$1,591.00
02-02-004 Skat Yam 12v S/B Mag Pump 144
$1,591.00
02-02-005 Skat Yam 12v S/B Billet Mag Pump 148 $2,075.00
02-02-102 Skat Trak Yamaha Driveshaft Exten
$419.00
02-02-405
02-02-406
02-02-407
Kawaski
Yamaha
Polaris/Mag Pump
Kawasaki Magnum Pump - Skat Trak
Outright- Skat-Trak 12 Vane 140,142 and 144mm Magnum Pumps.
Standard and Set Back models. Fits all years SXR 800 Standups.
Includes one SKAT TRAK Impeller.
02-05-003 Skat Trak Mag. Pmp 12v Setback SXR $1,668.00
02-05-004 Skat Trak Mag. Pmp 12v Std SXR
$1,668.00
02-02-101 Skat Trak Kawi SXR Driveshaft Exten
$419.00
Blowsion Kustom Kut-Back Stainless Impellers
Increased acceleration, bottom end hook-up and hi-rev grunt are only a few
of the advantages of the revolutionary Blowsion cut back impellers now
being offered. These machined masterpieces work more efficiently
than any stock or aftermarket "out of the box" impeller due
to the blueprinting and cut back modifications performed.
By machining the impeller, we are able to relocate it
closer to the vein section of the pump, increasing
response and reducing aeration of the water flow.
This virtually eliminates cavitation problems in the
surf and river chop. Finally, the performance that
freeriders and racers deserve. Available in both
Skat Trak and SOLAS options.
Item #: See Blowsion.com
$267.95 ~ $297.95+
PUMP
SXR and SXI Pump Seal
02-02-444
$39.95
Use this simple speed secret of the KAWI pros.
Stops cavitation in the pump of your SXR or SXI 750
(All years). Refine your pump for maximum waterflow.
Created from special composite material.
Blowsion Aluminum Super Jet Intake Duct
02-02-432
$95.95
Updated! Redesigned and incredible easy fit.
Replace that easily broken OEM Yamaha intake
duct with this unbreakable aluminum replacement.
Fits all years SJ and Blaster. We recommend our
940 Fast-Set Marine Sealant install.
Fits models from 1989 to current.
Impeller Shaft Tool
Holds spline of driveshaft for removal
of impeller. Kawasaki model fits all
1992 and newer, while Yamaha
model fits all years.
06-04-021
06-04-022
Kawasaki
Yamaha
$11.50
$13.95
BLOWSION.COM
19
Blowsion Vanity '89 Women's T-Shirt
$24.95
Blowsion has been helping to promote vanity and jealousy since 1989. Show
your attitude. Blowsion Bella T side seamed design with custom contoured
fit that clings to the body. Super high quality made of ring-spun 100% cotton.
Super soft 1x1 baby rib knit fabric. Black with contrasting gray and pink
Blowsion logo’s front and rear. Coverstitched 2" bottom baby hem.
07-01-217
07-01-218
07-01-219
07-01-220
07-01-221
Blowsion Women’s Grenade T-Shirt $24.95
The Grenade Sheila T can be abused on or off the
beach and will take the fragging! Tan with
contrasting 1" dark brown neck and
sleeve binding. Bomb Tested!
07-01-205
07-01-206
07-01-207
07-01-208
Blowsion Stash Hoodie $49.95
Ultra cotton Heavyweight Soft inner fleece and
High freakin' quality Blowsion Hoodies. Indestructible,
and will keep even the most frigid rider warm after
crawling into. Blowsion STASH logo emblazoned on
front with B Star logo off center on rear.
Women’s Grenade T - Tan/Chocolate - Small
Women‘s Grenade T - Tan/Chocolate - Medium
Women’s Grenade T - Tan/Chocolate - Large
Women’s Grenade T - Tan/Chocolate - X Large
07-01-132
07-01-133
07-01-134
07-01-135
07-01-136
SWAG
Stash Hoodie - Black - Small
Stash Hoodie - Black - Medium
Stash Hoodie - Black - Large
Stash Hoodie - Black - X Large
Stash Hoodie - Black - XX Large
Women’s T Vanity 1989 - Black/Pink - Small
Women’s T Vanity 1989 - Black/Pink - Medium
Women’s T Vanity 1989 - Black/Pink - Large
Women’s T Vanity 1989 - Black/Pink - X Large
Women’s T Vanity 1989 - Black/Pink - XX Large
Blowsion Bella Established 1989 Tierra T $24.95
Side seamed design with custom contoured fit that clings
to the body. High quality made of ring-spun 100% cotton.
Super soft 1x1 baby rib knit fabric. Charcoal Gray with
red foil Blowsion logo front and White B Star Overlay.
07-01-222
07-01-223
07-01-224
07-01-225
07-01-226
07-04-501
07-04-502
07-04-503
07-04-504
07-04-505
07-04-506
07-04-507
07-04-508
07-04-509
07-01-082
07-01-083
07-01-084
07-01-085
07-01-086
Mens T Vanity 1989 - Brown/Orange - Small
Mens T Vanity 1989 - Brown/Orange - Medium
Mens T Vanity 1989 - Brown/Orange - Large
Mens T Vanity 1989 - Brown/Orange - X Large
Mens T Vanity 1989 - Brown/Orange - XX Large
BlowSafe - Compact PWC Carrying Case
Black
Blueberry
Lemon
Kiwi
Cherry
Orange
Raspberry
Clear
Sour Apple
$8.50
Small yet highly versatile freeriding cases. Protection for small
ultra-valuable items like credit cards, ID cards, cash, PWC
registration and keys. Unique totally sealed waterproof
design provides protection that no wallet can match.
Built for outdoor jet skiing activities and surfriding,
these cases can fit into a wetsuit pocket, attach
to a PFD vest, PWC engine compartment or
storage bin, or even simply hang around your
neck with the lanyard style coil. Perfect for
those small items that you never want to
leave behind. Also lovingly referred to
as "Spliff Protectors" by our
Glaucoma-ridden riders
of Bob Marley
descent.
Blowsion Camo Coolie
07-02-135
$3.95
Official Beer Force neoprene
coolie with Blowsion Air Force
Logo.
Blowsion Beach Ball
07-02-141 $3.95
“Blow Balls” are fun at
the beach. Get some!
FULLGAZ Logo T-Shirt $21.95
Show your vibe. New pinned wide open Black Ts from
Fullgaz. Show your allegiance
to the coolest Freeride movement alive and breathing.
Special thanks to Ludo,
Francois and Julien for
showing in film, words,
and pictures what is means
to be FULLGAZ. Features
Fullgaz original logo on front
with back Fullgaz.com 3 Sport
logo and Blowsion Air Force
sleeve logo. 100% Cotton.
07-01-430
07-01-431
07-01-432
07-01-433
07-01-450
07-01-451
07-01-452
BareSkin Black
BareSkin Blue
BareSkin Red
Bronx
Blowsion Banner 07-02-142 $19.95
Show your support and make your garage
the envy of all neighbors. Watch and laugh as the uninformed viewer
asks "what is Blowvision?" Measuring 46x22 inches these 3 Color PolyVista
Banners come grommeted in all 4 corners so they can be hung easily
anywhere and everywhere.
Blowsion Bigstar Stickers - 8” and 17”
7 color combos to choose from. These aren’t cheezy
vinyl. Full screen-printed die cuts with UV protective
clear. Show your vanity! Priced each.
Blk/Green, Blk/Yellow, Blk/Orange,
Blue/Silver, Blk/Silver, Blk/Red, Blk/White.
8”: $2.25
17”: $2.95
Take a Stand: Ban The Sitdown $17.95
Guaranteed to chap the hide of any sensitive
couch rider. Front features Raid can “Ability: Kills
Sitdown Riders Dead”. Back features Crosshair Target ”Take
a Stand: Ban the Sitdown”. NOTE: Please retain a sense of
humor when viewing if you are a sitdown rider.
07-01-032 Banned T - Anger Red - Small
07-01-033 Banned T - Anger Red - Medium
07-01-034 Banned T - Anger Red - Large
07-01-035 Banned T - Anger Red - X Large
07-01-036 Banned T - Anger Red - XX Large
Blowsion Spray T-Shirt $19.95
A not uncommon apparel look
for the Blowsion staff. The Spray
edition shirt may look likea day in the
trenches at Blowsion!
Fullgaz Black M
Fullgaz Black L
Fullgaz Black XL
Fullgaz Black XXL
Made from 100% soft cotton terry cloth, these
one-size-fits-all oversize changing garments fit
and feel like a soft blanket and double as a
great body warmer for those just out of the
water. With the integrated hood even rainy
weather or scalding sun can be warded off.
BLOWSION.COM
B-Star Flex-Fit
Air Forced T-Shirt - Black - Small
Air Forced T-Shirt - Black - Medium
Air Forced T-Shirt - Black - Large
Air Forced T-Shirt - Black - X Large
Air Forced T-Shirt - Black - XX Large
BareSkin $59.95
Change your swimsuit or your wetsuit in complete comfort and privacy
with the new BareSkin. Easy to use- just pull it over your head, bring
your arms inside the specially designed interior access area and change
with ease in full privacy and comfort. Designed by Blowsion Pro Freerider
Ross Champion (www.Ross-Champion.com )
the BareSkin will allow you to change anywhere
and anyplace and still keep your exposed skin
covered up (privates and all!).
20
Camo
Blowsion Air Forced Men's T
$17.95
Blowsion Air Forced Black Knight T. 100% ultra cotton high quality
Black Knight color with contrasting green and white Blowsion
Air Forced logo’s front and rear.
Blowsion Vanity '89 Men's T-Shirt
$19.95
Blowsion has been helping to promote vanity and jealousy
since 1989. Show your attitude. 100% ultra cotton high quality
Earth Brown T with contrasting orange, black, and white
Blowsion logos front and rear.
07-01-095
07-01-096
07-01-097
07-01-098
07-01-099
Women’s Est 1989 Tierra T - Grey - X Small
Women’s Est 1989 Tierra T - Grey - Small
Women‘s Est 1989 Tierra T - Grey - Medium
Women’s Est 1989 Tierra T - Grey - Large
Women’s Est 1989 Tierra T - Grey - X Large
07-01-195
07-01-196
07-01-197
07-01-198
07-01-199
Spray T-Shirt Grey - Small
Spray T-Shirt Grey - Medium
Spray T-Shirt Grey - Large
Spray T-Shirt Grey - X Large
Spray T-Shirt Grey - XX Large
Blowsion Fiberglass Militia T-Shirt $17.95
Become one of the proud to show the honor
of having itched and lived during a footwell
install. Features the deathly Fiberglass Militia
logo.
Blowsion Swerve T-Shirt $24.95
New dye sublimated foil logo
design is guaranteed to cause all
who stare to swerve. Off the
hook Tee features wrap around
oversize B-Star and Established
1989 shoulder logo.
07-01-062
07-01-063
07-01-064
07-01-065
07-01-066
07-01-189
07-01-190
07-01-191
07-01-192
07-01-193
Militia T - Black - Small
Militia T - Black - Medium
Militia T - Black - Large
Militia T - Black - X Large
Militia T - Black - XX Large
Swerve T - Gray - Small
Swerve T - Gray - Medium
Swerve T - Gray - Large
Swerve T - Gray - X Large
Swerve T - Gray - XX Large
Blowsion Hats
07-01-801 Texstar Flex-Fit Hat Grey - Size: S/M
07-01-802 Texstar Flex-Fit Hat Grey - Size: L/XL
07-01-803 Texstar Flex-Fit Hat Team Green - Size: S/M
07-01-804 Texstar Flex-Fit Hat Team Green - Size: L/XL
07-01-805 Texstar Flex-Fit HatSpicy Orange - Size: S/M
07-01-806 Texstar Flex-Fit Hat Spicy Orange - Size: L/XL
07-01-807 Texstar Flex-Fit HatChocolate - Size: S/M
07-01-808 Texstar Flex-Fit HatChocolate - Size: L/XL
07-01-809 B-Star Flex-Fit Hat Size : 1SFA - Black
07-01-810 B-Star Flex-Fit Hat Size: 1SFA - White
07-01-811 Black Camo Flex-Fit Hat - Size: S/M
07-01-812 Black Camo Flex-Fit Hat - Size: L/XL
07-01-813 Blue Camo Flex-Fit Hat - Size: S/M
07-01-814 Blue Camo Flex-Fit Hat - Size: L/XL
07-01-815 Sand Camo Hat - Size: 1SFA
07-01-816 Pink Camo Hat - Size: 1SFA
07-01-817 Real Tree Hat- Size: 1SFA
07-01-818 Swat Black Flex-Fit Hat - Size: S/M
07-01-819 Swat Black Flex-Fit Hat - Size: L/XL
07-01-820 Bronx Charcoal Flex-Fit Hat - Size: S/M
07-01-821 Bronx Charcoal Flex-Fit Hat - Size: L/XL
07-01-822 Bronx White Flex-Fit Hat - Size: S/M
07-01-823 Bronx White Flex-Fit Hat - Size: L/XL
07-01-841 B-Star Beanie - Black
07-01-842 B-Star Beanie - White
$21.95
$21.95
$21.95
$21.95
$21.95
$21.95
$21.95
$21.95
$21.95
$21.95
$21.95
$21.95
$21.95
$21.95
$19.95
$19.95
$19.95
$24.00
$24.00
$24.00
$24.00
$24.00
$24.00
$19.95
$19.95
B-Star Beanie
SWAT
Texstar Flex-Fit
BLOWSION.COM
21
RIDING GEAR
JetPilot Flight Race John 2MM
$129.95
JP is back with the best suit available for PWC.
Built specific For Watercraft Racing and Freeriding
like the old days, each suit features 100% Super
Strong Flush Loc Seams, with Back Zipper,
Flex-Lite Ultra Stretch Neoprene Panels and
Tread Flex Kneepads.
07-04-001
07-04-002
07-04-003
07-04-004
07-04-005
07-04-006
07-04-007
07-04-008
07-04-009
07-04-010
07-04-011
07-04-012
07-04-013
07-04-014
07-04-015
Jet Pilot Flight Vest
$54.99
JP is back with the best protection vest
available for hardcore PWC riders! US
Coast Guard Approved, Side Entry (US
Patent Approved), 3 Buckle Closure
Design, Highest Quality PVC Foam,
Heavy Duty Coated Nylon, Lanyard
Clip Integrated.
Black - SM
Black - MD
Black - LG
Black - XL
Black - XXL
Blue - SM
Blue - MD
Blue - LG
Blue - XL
Blue - XXL
Red - SM
Red - MD
Red - LG
Red - XL
Red - XXL
07-04-401
07-04-402
07-04-403
07-04-404
07-04-405
07-04-406
07-04-407
07-04-408
07-04-409
07-04-410
07-04-411
07-04-412
White - S/M
White - L/XL
Black - S/M
Black - L/XL
Blue - S/M
Blue - L/XL
Green - S/M
Green - S/M
Yellow - S/M
Yellow - S/M
Red - S/M
Red - L/XL
Jet Pilot Gloves - Full Finger Black $32.99
Jet Pilot Full Finger gloves are made with 1mm
ultra strong neoprene. Recommended for all
conditions and considered by the Blowsion crew
and riders as THE ONLY glove worth having in
your gear bag. Durable synthetic palm with
extra padding, sublimated lycra finger gussets,
molded rubber finger protection patches
and embossed knuckle and wrist
panels. Designed for optimum fit
and comfort with rubberized
pro-grip thumb panel and
adjustable rubber/velcro wrist
closure.
07-04-201
07-04-202
07-04-203
07-04-204
07-04-205
Jet Pilot Booties
Black
$TBA (Visit Blowsion.com)
New for 2010 Two new models of booties incorporating JP's Race-Inspired
Designs. So new we did not even have pricing and feature details!
See Blowsion.com for all the updated details.
22
BLOWSION.COM
Jet Pilot Flight Tour Coat - 2mm
Black
$99.95
Finally it’s back. The legendary JP tour coat returns for 2010.
Stay warm or just freaking look COOL on the water or
on the beach. Color: Black Only. 100% Super
Strong Flush Loc Seams with Custom Two-Way
Zipper, Back Slit for maximum mobility, Velcro
Cuffs, neoprene Hood With drawstring and
front pockets with zipper closures.
07-04-021
07-04-022
07-04-023
07-04-024
07-04-025
SM
MD
LG
XL
XXL
Size 6
Size 7
Size 8
Size 9
Size 10
Size 11
Size 12
Size 13
RED EYE BAG
P6316
Black
$89.99
Perfect bag for sneaking on the plane with all the gear you can fit.
ROADTRIP BACKPACK
07-04-302
Black
$49.99
Grab and Go. Features all the zipper compartments you will ever need.
EXPEDITION BAG
07-04-301
Black
$149.99
JP’s Biggest. Heavy Duty 1680D Nylon, Premium 600D Polyester Nylon Coil
Zippers with Wing Badge Pulls, Alloy Dual Stem Trolley Handle, PVC-Reinforced
Bottom with Tractor Wheels, Inner Mesh Pockets with Laundry Compartment,
Woven Labels, and Embossed Side Panels.
JET PILOT SIZE CHART
JetPilot F22 Race Jacket
$84.99
Returning stronger and better for 2010, these are built
specific For Watercraft shredding. Unmatched Stretch
for Comfort & Fit, Elastic Cinch Cord Waist, Cuts
Windchill & U.V Rays and featuring 100% Super Strong
Flush Loc Seams.
07-04-041
Black - SM
07-04-042
Black - MD
07-04-043
Black - LG
07-04-044
Black - XL
07-04-045
Black - XXL
07-04-046
Blue - SM
07-04-047
Blue - MD
07-04-048
Blue - LG
07-04-049
Blue - XL
07-04-050
Blue - XXL
07-04-051
Red - SM
07-04-052
Red - MD
07-04-053
Red - LG
07-04-054
Red - XL
07-04-055
Red - XXL
07-04-106
07-04-107
07-04-108
07-04-109
07-04-110
07-04-111
07-04-112
07-04-113
XS
SM
MD
LG
XL
Men's Wetsuits
XS
Chest
32-35
Waist
24-27
Height
5'1"-5'5"
Weight
120-140
S
34-37
27-30
5'4"-5'7"
130-155
M
36-39
29-32
5'6"-5'9"
145-170
MT
36-39
29-32
5'10"-6'0"
155-180
L
38-41
31-34
5'8"-5'11"
165-190
Women's Wetsuits
XS
Bust
32-34
Waist
23-25
Height
5'4"-5'6"
Weight
100-115
S
33.5-35.5
24.5-26.5
5'5"-5'7"
110-125
M
35-37
26-28
5'6"-5'8"
120-125
L
36.5-38.5
27.5-29.5
5'7"-5'9"
130-145
XL
38+
29+
5'9"+
150+
LT
38-41
32-35
6'0"-6'3"
175-200
XL
40-43
33-36
5'10"-6'1"
180-205
XXL
43-45
35-37
6'0"-6'1"
190-210
XXXL
46+
38+
6'2"+
215+
Flight Side Entry Approved Vest
S/M
L/XL
Chest Size 32-40
42-50
BLOWSION.COM
23
HELMETS
ARAI GP-5
The GP-5 is the newest helmet design from Arai,
and is the helmet of choice of numerous top
professionals including Jeff Gordon, Juan Pablo
Montoya, and Dario Franchitti.
07-03-200
$1,237.95
ARAI VX-PRO3
Lately, we've heard some riders say they don't think
they need an off-road helmet "as good as an Arai
because I can get a cheaper one, and it's almost
as good." To which we respond: What part of their
cheaper helmet does the "almost as good" refer?
Fully removable, washable liner. Also availbale
via 2 day special order all VX Pro custom colors.
E-mail for details and current model pricing and
colors. Take 25.00 off your custom paint price if
purchased and painted from Blowsion.
Color: White
07-03-101
$529.95
Arai PED Rear Wing and Front Spoiler
The PED Kit is available for the Arai GP Helmets.
The PED is designed to reduce lift and turbulence
at high speeds by regulating the air stream OVER
the helmet. The kit also increases the
ventilation effect by directing more air into
the ventilation slots at the front and
increases the Venturi exhaust at the rear.
07-06-417
$99.95
ARAI Factory Tear-offs
A must for your Arai and Iridium shields.
Thick (10 mil.) 5 pack factory Arai tear-offs.
07-06-425
$10.95
Radio Kit - Helmet 4Ch Coil Cord
This is a complete 4-Conductor (IMSA Style)
Helmet kit with noise canceling microphone
included. Everything you need for your
helmet to get rippin' on the track.
07-06-427
$224.95
These are Arai factory GP5 and GP5W shields
are put through a complex series of treatments to
produce the final coated product. Smoked tint.
Each kit includes a micro fiber storage bag
and a 2-ounce bottle of visor cleaner.
$149.95
07-06-419
07-06-420
07-06-421
07-06-422
07-06-431
07-06-432
07-06-433
07-06-434
24
BLOWSION.COM
Arai GP5 Iridium
Arai GP5 Blue Mirror
Arai GP5 Gold Mirror
Arai GP5 Chrome Mirror
Arai GP5W Iridium
Arai GP5W Blue Mirror
Arai GP5W Gold Mirror
Arai GP5W Chrome Mirror
Radio Kit - Foam Earpeice Kit
Designed with Ultra High noise transducers.
Plugs directly into Driver Helmet. Includes
carrying case.
07-06-428
$135.95
ARAI GP Series Helmet Hardware Kit
ARAI GP Road Race helmets shield
fastening hardware. Includes all plastic
and aluminum fasteners.
07-06-418
$14.95
HANS® Helmet Pro Post Anchor Clip Kit
As furnished with all professional HANS® Devices.
Includes special wrench. Pro anchors have aluminum
bases available in clear anodized, blue, red and yellow.
Converts one helmet for use with a HANS® Device.
07-06-429
$79.00
ARAI GP-5W
Wider Eyeport and Vents for Closed Cockpit
race cars. Finally, a helmet designed specifically
for use inside a closed cockpit race car!
07-03-201
$907.95
ARAI GP-5K
The GP-5K is a helmet from Arai built to fill the
void left by the discontinuation of the GP-4K.
In comparison with the GP-4K, the GP-5K is a
much lighter helmet, and is constructed with
Arai's famous laminates.
07-03-202
$797.95
ARAI GP-JET F
The ARAI GP Jet F is the SA2005 open face
helmet constructed with a Complex Laminate
Shell created from fiberglass and resins
developed for aerospace use.
07-03-203
$472.95
ARAI SK-5 Kart Helmet
The Arai SK-5 Karting Helmet is based largely
on Arai's latest open wheel auto racing helmet,
the GP-5, worn by top drivers in Formula-1
and CART. Utilizing the same shell mold and
shield, the SK-5 gives the look most desired
by Karting racers.
07-03-204
$687.95
Giro Freeride Helmet
Here at Blowsion we call these new Freeride offerings by Giro the Ferrari of
freeride helmets- made with the utmost of high quality materials. Quick drain venting
and easy drying liner make these an incredible lid for aggro freeriding. New colors for 2010.
Not rated for racing impacts or IJSBA competition.
Worn by Pro Freeriders Ross Champion, Pierre Maixent, and Mike Serlin.
Giro Composite
07-03-010
07-03-011
07-03-012
07-03-018
07-03-019
07-03-020
$134.95
Giro Freeride - Composite - Matte Black - Small
Giro Freeride - Composite - Matte Black - Medium
Giro Freeride - Composite - Matte Black - Large
Giro Freeride - Composite - Matte Titanium Shards - Small
Giro Freeride - Composite - Matte Titanium Shards - Medium
Giro Freeride - Composite - Matte Titanium Shards - Large
Giro Carbon Fiber
07-03-027
07-03-028
07-03-029
$274.95
Giro Freeride - Carbon Fiber - Matte Black / Titanium - Small
Giro Freeride - Carbon Fiber - Matte Black / Titanium - Medium
Giro Freeride - Carbon Fiber - Matte Black / Titanium - Large
Goggle Grip Goggle Strap Guides $24.95/pair
Tired of losing your goggles during the heat of battle?
Tired of your goggle strap becoming misaligned?
Use a pair of Goggle Grip strap guides and
concentrate on your race instead!
07-06-401
Clear
07-06-402
Chrome
07-06-403
Black
07-06-404
Silver
Blowsion Graphic Freeride Helmet
$115.95
Made for Blowsion by Bell, these extremely light weight freeride helmets
are perfect for giving your head that extra little bit of protection while you
work the kinks out of your aerial maneuvers. Each helmet is constructed of
multiple layers of hand laminated fiberglass and an EPS foam liner designed
for maximum comfort and visibility with large eyeport design. Adjustable
visor and 15 built-in vents provide excellent water drainage after aerial
impacts. With an overall 'wet' weight of 2 Lbs you will not have any
whiplash impacts from water weight.
07-03-031
07-03-032
07-03-033
07-03-035
07-03-036
07-03-037
03-03-044
03-03-045
03-03-046
Bell Matte Black - Small
Bell Matte Black - Medium
Bell Matte Black - Large
Bell Red/ Charcoal - Small
Bell Red/ Charcoal - Medium
Bell Red/ Charcoal - Large
Bell White/Silver - Small
Bell White/Silver - Medium
Bell White/Silver - Large
Worn by Pro riders Ross Champion, Pierre Maixent,
Mike Serlin and Air Darin Anderson.
Blowsion Embroidered Helmet Bag
Each bag features grab strap for easy
carrying, Blowsion embroidered logos
and and a soft lined interior with
plenty of room for helmet and
extra items.
Color: Black/Silver
07.03.310
$35.95
BLOWSION.COM
25
PA I N T
BLOWSION PAINT SERVICE PRICING
Helmets
We can easily formulate a paint package that fits within your budget. Most of our helmet paint work ranges from $595.00900.00 US Dollars and up. We recommend using a new, solid color helmet for the best results. Used helmets with decals or
OEM graphics require an additional prep charge of anywhere from $45.00 to 95.00 and up.
We prefer that you do not prep (sand or primer) or mask the helmet yourself, or remove the moldings.
Basic graphic layout
Additional cartooning or characters, Sponsor lettering, nickname, etc.
Extra airbrush work or shadowing
Extra painted visor (for MX or open face helmets)
Bicycle or half-shell type helmets- basic layout
$495.00 ~ $700.00
$40.00 ~ $175.00 and up
$25.00 ~ $250.00 and up
$39.00 ~ $95.00 and up
$295.00 ~ $450.00 and up
Please do not hesitate to call or e-mail and share and image or idea with us for cost estimating and design input.
The turnaround time on helmets is approximately 4-10 weeks depending on customer demand and time of year. A two week
or less rush fee is available for 300.00 additional or 30% off the final cost.
Paint - Motorcycles
Tanks/Fenders - design only
Additional cartooning or characters
$1300 ~ $1800.00 & up
$150 ~ $1000 & up
Extra airbrush work or shadowing
Sandblasting, prep/bodywork
Call or email for estimate
Paintable Chrome (5-7 weeks additional turnaround time)
Cost on this process ranges from $350.00 to $450.00 for helmets, and $600.00 to $1500.00 on up for bike sheet metal (this is in
addition to the paint price). The set price is dependent on condition of helmet and or sheet metal. Please feel free to call or
e-mail for a detailed estimate.
S E AT C O V E R S
Blowsion Stitched Seat Covers
Following up on our incredibly popular custom stitched mat kits,
we now offer the same incredible quality and colors for all makes of PWC seats.
Hand stitched in any combination of colors and patterns you desire.
Yamaha Seat Covers
04-05-001
Seat Cover - Blaster - Stock Seat (custom colors)
04-05-002
Seat Cover - Blaster - Modified Seat (custom colors)
Yamaha FZR - (custom colors)
04-05-010
04-05-011
Yamaha FZR - (Blue/Black)
04-05-012
Yamaha FZR - (Red/Black)
Also Available: Yamaha GP 1200, Banshee ATV, Rhino UTV and more.
$169.95+
$169.95+
$190.00+
$190.00+
$190.00+
Kawasaki Seat Covers
04-05-100
Kawasaki Ultra 250X, 260X (custom colors)
04-05-101
Kawasaki Ultra 250X, 260X (Blue/Black)
04-05-102
Kawasaki Ultra 250X, 260X (Red/Black)
04-05-103
Kawasaki Ultra 250X, 260X (Green/Black)
Also Available: Kawasaki X2, 750SS, STXR and many more.
$190.00+
$190.00+
$190.00+
$190.00+
Available now via email or phone. Full detailed selection available online with new
2010 Blowsion.com website launch coming soon including SEA-DOO, HONDA, and POLARIS models.
Paintable Patterns
Want a unique Camouflage, Diamond Plate or Carbon Fiber background finish for your helmet design? Blowsion has been
rendering what is commonly called Transfer Printing since 2003 as a base for some very unique designs. With a multitude of
color backgrounds and patterns available as well as single or dual dip procedures, the costs for this process can be as little as
$190.00 on up to $295.00 plus for extensive coating options. This price is in addition to the normal helmet paint design costs.
Watercraft Paint and Hull Repair
Blowsion is a Factory approved repair and refinisher for all models and makes of PWC. Free insurance estimates. Fiberglass,
SMC, Gel Coat, Metton etc…we fix it all. Let us do the itching for you. Call or email for estimate and cost breakdown
information.
Watercraft Hull Reinforcement/Strengthening All models (a must for ocean or freestyle riders) $250.00 ~ $650.00 & up
Watercraft Mat/Decal Removal • Hull Dis/Re-assembly • Hull Prep For Painting
Call or email for a detailed price estimate
Watercraft Paint - Fully Disassembled Stand Up Watercraft
Custom airbrush with multiple colors
Airbrush shadowing, lettering etc.
(Upholstery kits also available, call for prices.)
$1300.00 ~ $2500.00 & up
Watercraft Paint - Fully Disassembled Sit Down Watercraft
Custom paint with multiple colors
airbrush shadowing, lettering etc.
Custom matched mat and seat
(Upholstery kits also available, call for prices.)
$1500.00 ~ $2700.00 & up
Watercraft "dress-up" Paint Packages
The below options require very little disassembly and are applied over certain areas of the base color factory finish.
Stand Up model graphic color paint package (includes lettering, cartooning etc. w/ clear coat)
$400.00 ~ $900.00 & up
$600.00 ~ $900.00 & up
Sit Down graphic color paint package (includes lettering, cartooning etc. w/ clear coat)
26
BLOWSION.COM
Do not hesitate to call or email and share and image or idea with us as building a stellar design together is the goal. The
turnaround time on watercraft is approximately 6-10 weeks depending on customer demand and time of year. A three week or
less Watercraft Paint rush fee is available for 500.00 additional or 30% of the final cost.
BLOWSION.COM
27
28
BLOWSION.COM
BLOWSION.COM
29